The CONFIG_VFIO switch only works in target specific code. Since
migration/migration.c is common code, the #ifdef does not have
the intended behavior here. Move the related code to a separate
file now which gets compiled via specific_ss instead.
Fixes: 3710586caa ("qapi: Add VFIO devices migration stats in Migration stats")
Message-Id: <20210414112004.943383-3-thuth@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
We never read or write beyond the used_length of memory blocks when
migrating. Make this clearer by using offset_in_ramblock() consistently.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210429112708.12291-11-david@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
We actually want to print the used_length, against which we check.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210429112708.12291-10-david@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Resizing while migrating is dangerous and does not work as expected.
The whole migration code works with the usable_length of a ram block and
does not expect this value to change at random points in time.
In the case of postcopy, relying on used_length is racy as soon as the
guest is running. Also, when used_length changes we might leave the
uffd handler registered for some memory regions, reject valid pages
when migrating and fail when sending the recv bitmap to the source.
Resizing can be trigger *after* (but not during) a reset in
ACPI code by the guest
- hw/arm/virt-acpi-build.c:acpi_ram_update()
- hw/i386/acpi-build.c:acpi_ram_update()
Let's remember the original used_length in a separate variable and
use it in relevant postcopy code. Make sure to update it when we resize
during precopy, when synchronizing the RAM block sizes with the source.
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210429112708.12291-9-david@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Add two new helper functions. This will come in come handy once we want to
handle ram block resizes while postcopy is active.
Note that ram_block_from_stream() will already print proper errors.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210429112708.12291-8-david@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
dgilbert: Added brackets in host_page_from_ram_block_offset
to cause uintptr_t to cast the sum, to fix armhf-cross build
In case we grow our RAM after ram_postcopy_incoming_init() (e.g., when
synchronizing the RAM block state with the migration source), the resized
part would not get discarded. Let's perform that when being notified
about a resize while postcopy has been advised, but is not listening
yet. With precopy, the process is as following:
1. VM created
- RAM blocks are created
2. Incomming migration started
- Postcopy is advised
- All pages in RAM blocks are discarded
3. Precopy starts
- RAM blocks are resized to match the size on the migration source.
- RAM pages from precopy stream are loaded
- Uffd handler is registered, postcopy starts listening
4. Guest started, postcopy running
- Pagefaults get resolved, pages get placed
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210429112708.12291-7-david@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Resizing while migrating is dangerous and does not work as expected.
The whole migration code works on the usable_length of ram blocks and does
not expect this to change at random points in time.
In the case of precopy, the ram block size must not change on the source,
after syncing the RAM block list in ram_save_setup(), so as long as the
guest is still running on the source.
Resizing can be trigger *after* (but not during) a reset in
ACPI code by the guest
- hw/arm/virt-acpi-build.c:acpi_ram_update()
- hw/i386/acpi-build.c:acpi_ram_update()
Use the ram block notifier to get notified about resizes. Let's simply
cancel migration and indicate the reason. We'll continue running on the
source. No harm done.
Update the documentation. Postcopy will be handled separately.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210429112708.12291-5-david@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Manual merge
Result @blocked is redundant. Unfortunately, we realized this too
close to the release to risk dropping it, so we deprecated it
instead, in commit e11ce6c06.
Since it was deprecated from the start, we can delete it without
the customary grace period. Do so.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210429140424.2802929-1-armbru@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Starting from pss->page, ram_save_host_page() will check every page
and send the dirty pages up to the end of the current host page or
the boundary of used_length of the block. If the host page size is
a huge page, the step "check" will take a lot of time.
It will improve performance to use migration_bitmap_find_dirty().
Tested on Kunpeng 920; VM parameters: 1U 4G (page size 1G)
The time of ram_save_host_page() in the last round of ram saving:
before optimize: 9250us after optimize: 34us
Signed-off-by: Keqian Zhu <zhukeqian1@huawei.com>
Signed-off-by: Kunkun Jiang <jiangkunkun@huawei.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-Id: <20210316125716.1243-3-jiangkunkun@huawei.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
When the host page is a huge page and something is sent in the
current iteration, migration_rate_limit() should be executed.
If not, it can be omitted.
Signed-off-by: Keqian Zhu <zhukeqian1@huawei.com>
Signed-off-by: Kunkun Jiang <jiangkunkun@huawei.com>
Reviewed-by: David Edmondson <david.edmondson@oracle.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20210316125716.1243-2-jiangkunkun@huawei.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The bulk stage is kind of weird: migration_bitmap_find_dirty() will
indicate a dirty page, however, ram_save_host_page() will never save it, as
migration_bitmap_clear_dirty() detects that it is not dirty.
We already fill the bitmap in ram_list_init_bitmaps() with ones, marking
everything dirty - it didn't used to be that way, which is why we needed
an explicit first bulk stage.
Let's simplify: make the bitmap the single source of thuth. Explicitly
handle the "xbzrle_enabled after first round" case.
Regarding XBZRLE (implicitly handled via "ram_bulk_stage = false" right
now), there is now a slight change in behavior:
- Colo: When starting, it will be disabled (was implicitly enabled)
until the first round actually finishes.
- Free page hinting: When starting, XBZRLE will be disabled (was implicitly
enabled) until the first round actually finished.
- Snapshots: When starting, XBZRLE will be disabled. We essentially only
do a single run, so I guess it will never actually get disabled.
Postcopy seems to indirectly disable it in ram_save_page(), so there
shouldn't be really any change.
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Juan Quintela <quintela@redhat.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: Andrey Gruzdev <andrey.gruzdev@virtuozzo.com>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210216105039.40680-1-david@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Stop including cpu.h in files that don't need it.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210416171314.2074665-4-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Stop including sysemu/sysemu.h in files that don't need it.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210416171314.2074665-2-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Rename 'bs' to commonly used 'block' in migration/ram.c background
snapshot code.
Signed-off-by: Andrey Gruzdev <andrey.gruzdev@virtuozzo.com>
Reported-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210401092226.102804-5-andrey.gruzdev@virtuozzo.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This commit solves the issue with userfault_fd WP feature that
background snapshot is based on. For any never poluated or discarded
memory page, the UFFDIO_WRITEPROTECT ioctl() would skip updating
PTE for that page, thereby loosing WP setting for it.
So we need to pre-fault pages for each RAM block to be protected
before making a userfault_fd wr-protect ioctl().
Fixes: 278e2f551a (migration: support
UFFD write fault processing in ram_save_iterate())
Signed-off-by: Andrey Gruzdev <andrey.gruzdev@virtuozzo.com>
Reported-by: David Hildenbrand <david@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210401092226.102804-4-andrey.gruzdev@virtuozzo.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
dgilbert:
Bodged ifdef __linux__ on ram_write_tracking_prepare, should really
go in a stub
The same thing as for incoming postcopy - we cannot deal with concurrent
RAM discards when using background snapshot feature in outgoing migration.
Fixes: 8518278a6a (migration: implementation
of background snapshot thread)
Signed-off-by: Andrey Gruzdev <andrey.gruzdev@virtuozzo.com>
Reported-by: David Hildenbrand <david@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210401092226.102804-3-andrey.gruzdev@virtuozzo.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Added missing qemu_fflush() on buffer file holding precopy device state.
Increased initial QIOChannelBuffer allocation to 512KB to avoid reallocs.
Typical configurations often require >200KB for device state and VMDESC.
Fixes: 8518278a6a (migration: implementation
of background snapshot thread)
Signed-off-by: Andrey Gruzdev <andrey.gruzdev@virtuozzo.com>
Message-Id: <20210401092226.102804-2-andrey.gruzdev@virtuozzo.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
V2:
- "tests: Add tests for yank with the chardev-change case" updated
- drop the readthedoc theme patch
-----BEGIN PGP SIGNATURE-----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=UwXe
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/marcandre/tags/for-6.0-pull-request' into staging
For 6.0 misc patches under my radar.
V2:
- "tests: Add tests for yank with the chardev-change case" updated
- drop the readthedoc theme patch
# gpg: Signature made Thu 01 Apr 2021 12:54:52 BST
# gpg: using RSA key 87A9BD933F87C606D276F62DDAE8E10975969CE5
# gpg: issuer "marcandre.lureau@redhat.com"
# gpg: Good signature from "Marc-André Lureau <marcandre.lureau@redhat.com>" [full]
# gpg: aka "Marc-André Lureau <marcandre.lureau@gmail.com>" [full]
# Primary key fingerprint: 87A9 BD93 3F87 C606 D276 F62D DAE8 E109 7596 9CE5
* remotes/marcandre/tags/for-6.0-pull-request:
tests: Add tests for yank with the chardev-change case
chardev: Fix yank with the chardev-change case
chardev/char.c: Always pass id to chardev_new
chardev/char.c: Move object_property_try_add_child out of chardev_new
yank: Always link full yank code
yank: Remove dependency on qiochannel
docs: simplify each section title
dbus-vmstate: Increase the size of input stream buffer used during load
util: fix use-after-free in module_load_one
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Remove dependency on qiochannel by removing yank_generic_iochannel and
letting migration and chardev use their own yank function for
iochannel.
Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20ff143fc2db23e27cd41d38043e481376c9cec1.1616521341.git.lukasstraub2@web.de>
Commit 3eacf70bb5 neglected to fix this
for softmmu configs, which pull in migration's use of gnutls.
This fixes the following compilation failure on Arm-based Macs:
In file included from migration/multifd.c:23:
In file included from migration/tls.h:25:
In file included from include/io/channel-tls.h:26:
In file included from include/crypto/tlssession.h:24:
include/crypto/tlscreds.h:28:10: fatal error: 'gnutls/gnutls.h' file not found
#include <gnutls/gnutls.h>
^~~~~~~~~~~~~~~~~
1 error generated.
(as well as for channel.c and tls.c)
Signed-off-by: Jessica Clarke <jrtc27@jrtc27.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20210320171221.37437-1-jrtc27@jrtc27.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Incoming enabled bitmaps are busy, because we do
bdrv_dirty_bitmap_create_successor() for them. But disabled bitmaps
being migrated are not marked busy, and user can remove them during the
incoming migration. Then we may crash in cancel_incoming_locked() when
try to remove the bitmap that was already removed by user, like this:
#0 qemu_mutex_lock_impl (mutex=0x5593d88c50d1, file=0x559680554b20
"../block/dirty-bitmap.c", line=64) at ../util/qemu-thread-posix.c:77
#1 bdrv_dirty_bitmaps_lock (bs=0x5593d88c0ee9)
at ../block/dirty-bitmap.c:64
#2 bdrv_release_dirty_bitmap (bitmap=0x5596810e9570)
at ../block/dirty-bitmap.c:362
#3 cancel_incoming_locked (s=0x559680be8208 <dbm_state+40>)
at ../migration/block-dirty-bitmap.c:918
#4 dirty_bitmap_load (f=0x559681d02b10, opaque=0x559680be81e0
<dbm_state>, version_id=1) at ../migration/block-dirty-bitmap.c:1194
#5 vmstate_load (f=0x559681d02b10, se=0x559680fb5810)
at ../migration/savevm.c:908
#6 qemu_loadvm_section_part_end (f=0x559681d02b10,
mis=0x559680fb4a30) at ../migration/savevm.c:2473
#7 qemu_loadvm_state_main (f=0x559681d02b10, mis=0x559680fb4a30)
at ../migration/savevm.c:2626
#8 postcopy_ram_listen_thread (opaque=0x0)
at ../migration/savevm.c:1871
#9 qemu_thread_start (args=0x5596817ccd10)
at ../util/qemu-thread-posix.c:521
#10 start_thread () at /lib64/libpthread.so.0
#11 clone () at /lib64/libc.so.6
Note bs pointer taken from bitmap: it's definitely bad aligned. That's
because we are in use after free, bitmap is already freed.
So, let's make disabled bitmaps (being migrated) busy during incoming
migration.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20210322094906.5079-2-vsementsov@virtuozzo.com>
The generic 'migrate_set_parameters' command handle all types of param.
Only the QMP commands were documented in the deprecations page, but the
rationale for deprecating applies equally to HMP, and the replacements
exist. Furthermore the HMP commands are just shims to the QMP commands,
so removing the latter breaks the former unless they get re-implemented.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Replaced various qemu_mutex_lock calls and their respective
qemu_mutex_unlock calls with QEMU_LOCK_GUARD macro. This simplifies
the code by eliminating the respective qemu_mutex_unlock calls.
Signed-off-by: Mahmoud Mandour <ma.mandourr@gmail.com>
Message-Id: <20210311031538.5325-7-ma.mandourr@gmail.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
If any error happens during multifd send thread creating (e.g. channel broke
because new domain is destroyed by the dst), multifd_tls_handshake_thread
may exit silently, leaving main migration thread hanging (ram_save_setup ->
multifd_send_sync_main -> qemu_sem_wait(&p->sem_sync)).
Fix that by adding error handling in multifd_tls_handshake_thread.
Signed-off-by: Hao Wang <wanghao232@huawei.com>
Message-Id: <20210209104237.2250941-3-wanghao232@huawei.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Chuan Zheng <zhengchuan@huawei.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Function multifd_channel_connect() return "true" to indicate failure,
which is rather confusing. Fix that.
Signed-off-by: Hao Wang <wanghao232@huawei.com>
Message-Id: <20210209104237.2250941-2-wanghao232@huawei.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Chuan Zheng <zhengchuan@huawei.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Bitmap's source persistence is transported over the migration stream and
the destination mirrors it. In some cases the destination might want to
persist bitmaps which are not persistent on the source (e.g. the result
of merging bitmaps from a number of layers on the source when migrating
into a squashed image) but currently it would need to create another set
of persistent bitmaps and merge them.
This patch adds a 'transform' property to the alias map which allows
overriding the persistence of migrated bitmaps both on the source and
destination sides.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Message-Id: <b20afb675917b86f6359ac3591166ac6d4233573.1613150869.git.pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: grammar tweaks, drop dead conditional]
Signed-off-by: Eric Blake <eblake@redhat.com>
Currently the alias mapping hash stores just strings of the target
objects internally. In further patches we'll be adding another member
which will need to be stored in the map so pass a copy of the whole
BitmapMigrationBitmapAlias QAPI struct into the map.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Message-Id: <fc5f27e1fe16cb75e08a248c2d938de3997b9bfb.1613150869.git.pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: adjust long lines]
Signed-off-by: Eric Blake <eblake@redhat.com>
Postcopy may also be advised for dirty-bitmap migration only, in which
case the remote page size will not be available and we'll instead read
bogus data, blocking migration with a mismatch error if the VM uses
hugepages.
Fixes: 58110f0acb ("migration: split common postcopy out of ram postcopy")
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
Message-Id: <20210204163522.13291-1-s.reiter@proxmox.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
savevm, loadvm and delvm are some of the few HMP commands that have never
been converted to use QMP. The reasons for the lack of conversion are
that they blocked execution of the event thread, and the semantics
around choice of disks were ill-defined.
Despite this downside, however, libvirt and applications using libvirt
have used these commands for as long as QMP has existed, via the
"human-monitor-command" passthrough command. IOW, while it is clearly
desirable to be able to fix the problems, they are not a blocker to
all real world usage.
Meanwhile there is a need for other features which involve adding new
parameters to the commands. This is possible with HMP passthrough, but
it provides no reliable way for apps to introspect features, so using
QAPI modelling is highly desirable.
This patch thus introduces new snapshot-{load,save,delete} commands to
QMP that are intended to replace the old HMP counterparts. The new
commands are given different names, because they will be using the new
QEMU job framework and thus will have diverging behaviour from the HMP
originals. It would thus be misleading to keep the same name.
While this design uses the generic job framework, the current impl is
still blocking. The intention that the blocking problem is fixed later.
None the less applications using these new commands should assume that
they are asynchronous and thus wait for the job status change event to
indicate completion.
In addition to using the job framework, the new commands require the
caller to be explicit about all the block device nodes used in the
snapshot operations, with no built-in default heuristics in use.
Note that the existing "query-named-block-nodes" can be used to query
what snapshots currently exist for block nodes.
Acked-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210204124834.774401-13-berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
dgilbert: removed tests for now, the output ordering isn't
deterministic
Make snapshot deletion consistent with the snapshot save
and load commands by using a wrapper around the blockdev
layer. The main difference is that we get upfront validation
of the passed in device list (if any).
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210204124834.774401-10-berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Modify load_snapshot/save_snapshot to accept the device list and vmstate
node name parameters previously added to the block layer.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210204124834.774401-9-berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The traditional HMP "savevm" command will overwrite an existing snapshot
if it already exists with the requested name. This new flag allows this
to be controlled allowing for safer behaviour with a future QMP command.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210204124834.774401-8-berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Currently bdrv_all_find_snapshot() will return 0 if it finds
a snapshot, -1 if an error occurs, or if it fails to find a
snapshot. New callers to be added want to distinguish between
the error scenario and failing to find a snapshot.
Rename it to bdrv_all_has_snapshot and make it return -1 on
error, 0 if no snapshot is found and 1 if snapshot is found.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210204124834.774401-7-berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Currently the vmstate will be stored in the first block device that
supports snapshots. Historically this would have usually been the
root device, but with UEFI it might be the variable store. There
needs to be a way to override the choice of block device to store
the state in.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210204124834.774401-6-berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
When running snapshot operations, there are various rules for which
blockdevs are included/excluded. While this provides reasonable default
behaviour, there are scenarios that are not well handled by the default
logic. Some of the conditions do not have a single correct answer.
Thus there needs to be a way for the mgmt app to provide an explicit
list of blockdevs to perform snapshots across. This can be achieved
by passing a list of node names that should be used.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210204124834.774401-5-berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
None of the callers care about the errno value since there is a full
Error object populated. This gives consistency with save_snapshot()
which already just returns a boolean value.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
[PMD: Return false/true instead of -1/0, document function]
Acked-by: Pavel Dovgalyuk <pavel.dovgalyuk@ispras.ru>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210204124834.774401-4-berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Just for consistency, following the example documented since
commit e3fe3988d7 ("error: Document Error API usage rules"),
return a boolean value indicating an error is set or not.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Acked-by: Pavel Dovgalyuk <pavel.dovgalyuk@ispras.ru>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210204124834.774401-3-berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The bdrv_all_*_snapshot functions return a BlockDriverState pointer
for the invalid backend, which the callers then use to report an
error message. In some cases multiple callers are reporting the
same error message, but with slightly different text. In the future
there will be more error scenarios for some of these methods, which
will benefit from fine grained error message reporting. So it is
helpful to push error reporting down a level.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
[PMD: Initialize variables]
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210204124834.774401-2-berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Modify query-migrate so that it has a flag indicating if outbound
migration is blocked, and if it is a list of reasons.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20210202135522.127380-2-dgilbert@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
migrate_params_check() has a number of error messages of the form
Parameter 'NAME' expects is invalid, it should be ...
Fix them to something like
Parameter 'NAME' expects a ...
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20210202141734.2488076-5-armbru@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
cache_init() attempts to handle allocation failure. The two error
messages are garbage, as untested error messages commonly are:
Parameter 'cache size' expects Failed to allocate cache
Parameter 'cache size' expects Failed to allocate page cache
Fix them to just
Failed to allocate cache
Failed to allocate page cache
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20210202141734.2488076-4-armbru@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
73af8dd8d7 "migration: Make xbzrle_cache_size a migration
parameter" (v2.11.0) made the new parameter unsigned (QAPI type
'size', uint64_t in C). It neglected to update existing code, which
continues to use int64_t.
migrate_xbzrle_cache_size() returns the new parameter. Adjust its
return type.
QMP query-migrate-cache-size returns migrate_xbzrle_cache_size().
Adjust its return type.
migrate-set-parameters passes the new parameter to
xbzrle_cache_resize(). Adjust its parameter type.
xbzrle_cache_resize() passes it on to cache_init(). Adjust its
parameter type.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20210202141734.2488076-3-armbru@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Introducing implementation of 'background' snapshot thread
which in overall follows the logic of precopy migration
while internally utilizes completely different mechanism
to 'freeze' vmstate at the start of snapshot creation.
This mechanism is based on userfault_fd with wr-protection
support and is Linux-specific.
Signed-off-by: Andrey Gruzdev <andrey.gruzdev@virtuozzo.com>
Acked-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20210129101407.103458-5-andrey.gruzdev@virtuozzo.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
In this particular implementation the same single migration
thread is responsible for both normal linear dirty page
migration and procesing UFFD page fault events.
Processing write faults includes reading UFFD file descriptor,
finding respective RAM block and saving faulting page to
the migration stream. After page has been saved, write protection
can be removed. Since asynchronous version of qemu_put_buffer()
is expected to be used to save pages, we also have to flush
migraion stream prior to un-protecting saved memory range.
Write protection is being removed for any previously protected
memory chunk that has hit the migration stream. That's valid
for pages from linear page scan along with write fault pages.
Signed-off-by: Andrey Gruzdev <andrey.gruzdev@virtuozzo.com>
Acked-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20210129101407.103458-4-andrey.gruzdev@virtuozzo.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
fixup pagefault.address cast for 32bit
Add new capability to 'qapi/migration.json' schema.
Update migrate_caps_check() to validate enabled capability set
against introduced one. Perform checks for required kernel features
and compatibility with guest memory backends.
Signed-off-by: Andrey Gruzdev <andrey.gruzdev@virtuozzo.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210129101407.103458-2-andrey.gruzdev@virtuozzo.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Fixed error when compiling migration/qemu-file.c with -Werror=maybe-uninitialized
as shown here:
../migration/qemu-file.c: In function 'qemu_get_buffer_in_place':
../migration/qemu-file.c:604:18: error: 'src' may be used uninitialized in this function [-Werror=maybe-uninitialized]
604 | *buf = src;
| ~~~~~^~~~~
cc1: all warnings being treated as errors
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20210128130625.569900-1-wainersm@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
When VM migrate VMState of configuration, the fields(name and capabilities)
of configuration having a flag of VMS_ALLOC need to allocate memory. If the
src doesn't free memory of capabilities in SaveState after save VMState of
configuration, or the dst doesn't free memory of name and capabilities in post
load of configuration, it may result in memory leak of name and capabilities.
We free memory in configuration_post_save and configuration_post_load func,
which prevents memory leak.
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Jinhao Gao <gaojinhao@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20201231061020.828-3-gaojinhao@huawei.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
These cases require a bit more thought to review; in each case, the
code was appending to a list, but not with a FOOList **tail variable.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210113221013.390592-6-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Flawed change to qmp_guest_network_get_interfaces() dropped]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Register yank functions on sockets to shut them down.
Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <484c6a14cc2506bebedd5a237259b91363ff8f88.1609167865.git.lukasstraub2@web.de>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
This commit is the result of running the timer-del-timer-free.cocci
script on the whole source tree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Corey Minyard <cminyard@mvista.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201215154107.3255-4-peter.maydell@linaro.org
-----BEGIN PGP SIGNATURE-----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=vGLy
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2020-12-19' into staging
QAPI patches patches for 2020-12-19
# gpg: Signature made Sat 19 Dec 2020 09:40:05 GMT
# gpg: using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg: issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* remotes/armbru/tags/pull-qapi-2020-12-19: (33 commits)
qobject: Make QString immutable
block: Use GString instead of QString to build filenames
keyval: Use GString to accumulate value strings
json: Use GString instead of QString to accumulate strings
migration: Replace migration's JSON writer by the general one
qobject: Factor JSON writer out of qobject_to_json()
qobject: Factor quoted_str() out of to_json()
qobject: Drop qstring_get_try_str()
qobject: Drop qobject_get_try_str()
Revert "qobject: let object_property_get_str() use new API"
block: Avoid qobject_get_try_str()
qmp: Fix tracing of non-string command IDs
qobject: Move internals to qobject-internal.h
hw/rdma: Replace QList by GQueue
Revert "qstring: add qstring_free()"
qobject: Change qobject_to_json()'s value to GString
qobject: Use GString instead of QString to accumulate JSON
qobject: Make qobject_to_json_pretty() take a pretty argument
monitor: Use GString instead of QString for output buffer
hmp: Simplify how qmp_human_monitor_command() gets output
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Commit 8118f0950f "migration: Append JSON description of migration
stream" needs a JSON writer. The existing qobject_to_json() wasn't a
good fit, because it requires building a QObject to convert. Instead,
migration got its very own JSON writer, in commit 190c882ce2 "QJSON:
Add JSON writer". It tacitly limits numbers to int64_t, and strings
contents to characters that don't need escaping, unlike
qobject_to_json().
The previous commit factored the JSON writer out of qobject_to_json().
Replace migration's JSON writer by it.
Cc: Juan Quintela <quintela@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201211171152.146877-17-armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Anywhere we create a list of just one item or by prepending items
(typically because order doesn't matter), we can use
QAPI_LIST_PREPEND(). But places where we must keep the list in order
by appending remain open-coded until later patches.
Note that as a side effect, this also performs a cleanup of two minor
issues in qga/commands-posix.c: the old code was performing
new = g_malloc0(sizeof(*ret));
which 1) is confusing because you have to verify whether 'new' and
'ret' are variables with the same type, and 2) would conflict with C++
compilation (not an actual problem for this file, but makes
copy-and-paste harder).
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20201113011340.463563-5-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
[Straightforward conflicts due to commit a8aa94b5f8 "qga: update
schema for guest-get-disks 'dependents' field" and commit a10b453a52
"target/mips: Move mips_cpu_add_definition() from helper.c to cpu.c"
resolved. Commit message tweaked.]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Instead of taking a list parameter and returning a new head at a
distance, just return the new item for the caller to insert into a
list via QAPI_LIST_PREPEND.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20201113011340.463563-4-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Move the property types and property macros implemented in
qdev-properties-system.c to a new qdev-properties-system.h
header.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20201211220529.2290218-16-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The following steps will cause qemu assertion failure:
- pause vm by executing 'virsh suspend'
- create external snapshot of memory and disk using 'virsh snapshot-create-as'
- doing the above operation again will cause qemu crash
The backtrace looks like:
at /build/qemu-5.0/migration/savevm.c:1401
at /build/qemu-5.0/migration/savevm.c:1453
When the first migration completes, bs->open_flags will set BDRV_O_INACTIVE
flag by bdrv_inactivate_all(), and during the second migration the
bdrv_inactivate_recurse assert that the bs->open_flags is already
BDRV_O_INACTIVE enabled which cause crash.
As Vladimir suggested, this patch makes migrate_prepare check the state of vm and
return error if it is in RUN_STATE_POSTMIGRATE state.
Signed-off-by: Tuguoyi <tu.guoyi@h3c.com>
Message-Id: <6b704294ad2e405781c38fb38d68c744@h3c.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reported-by: Li Zhang <li.zhang@cloud.ionos.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@cloud.ionos.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
bdrv_all_create_snapshot() can fails with some snapshots created,
so it's better to delete those snapshots before returns to the caller
Signed-off-by: Tuguoyi <tu.guoyi@h3c.com>
Message-Id: <1607410416-13563-3-git-send-email-tu.guoyi@h3c.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The snapshot in each bs is deleted at the beginning, so there is no need
to find the snapshot again.
Signed-off-by: Tuguoyi <tu.guoyi@h3c.com>
Message-Id: <1607410416-13563-2-git-send-email-tu.guoyi@h3c.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Make qemu_start_incoming_migration local to migration/migration.c.
By using the runstate instead of a separate flag, vl need not do
anything to setup deferred incoming migration.
qmp_migrate_incoming also does not need the deferred_incoming flag
anymore, because "-incoming PROTOCOL" will clear the "once" flag
before the main loop starts. Therefore, later invocations of
the migrate-incoming command will fail with the existing
"The incoming migration has already been started" error message.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Some very simple initialization routines can be nested in existing
subsystem-level functions, do that to simplify qemu_init.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There is no "version 2" of the "Lesser" General Public License.
It is either "GPL version 2.0" or "Lesser GPL version 2.1".
This patch replaces all occurrences of "Lesser GPL version 2" with
"Lesser GPL version 2.1" in comment section.
Signed-off-by: Chetan Pant <chetan4windows@gmail.com>
Message-Id: <20201023123130.19656-1-chetan4windows@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The following sequence may cause the VM abort during migration:
1. RUN_STATE_RUNNING,MIGRATION_STATUS_ACTIVE
2. before call migration_completion(), we send migrate_cancel
QMP command, the state machine is changed to:
RUN_STATE_RUNNING,MIGRATION_STATUS_CANCELLING
3. call migration_completion(), and the state machine is
switch to: RUN_STATE_RUNNING,MIGRATION_STATUS_COMPLETED
4. call migration_iteration_finish(), because the migration
status is COMPLETED, so it will try to set the runstate
to POSTMIGRATE, but RUNNING-->POSTMIGRATE is an invalid
transition, so abort().
The migration_completion() should not change the migration state
to COMPLETED if it is already changed to CANCELLING.
Signed-off-by: Longpeng(Mike) <longpeng2@huawei.com>
Message-Id: <20201105091726.148-1-longpeng2@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
When creating new tls client, the tioc->master will be referenced which results in socket
leaking after multifd_save_cleanup if we cancel migration.
Fix it by do object_unref() after tls client creation.
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Chuan Zheng <zhengchuan@huawei.com>
Message-Id: <1605104763-118687-1-git-send-email-zhengchuan@huawei.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Remove redundant blank line which is left by Commit 662770af7c,
also take this opportunity to remove redundant includes in dirtyrate.c.
Signed-off-by: Chuan Zheng <zhengchuan@huawei.com>
Message-Id: <1604030281-112946-1-git-send-email-zhengchuan@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
After the WITH_QEMU_LOCK_GUARD macro is added, the compiler cannot identify
that the statements in the macro must be executed. As a result, some variables
assignment statements in the macro may be considered as unexecuted by the compiler.
When the -Wmaybe-uninitialized capability is enabled on GCC9,the compiler showed warning:
migration/migration.c: In function ‘migrate_send_rp_req_pages’:
migration/migration.c:384:8: warning: ‘received’ may be used uninitialized in this function [-Wmaybe-uninitialized]
384 | if (received) {
| ^
Add a default value for 'received' to prevented the warning.
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Chen Qun <kuhn.chenqun@huawei.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20201111142203.2359370-6-kuhn.chenqun@huawei.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The qemu main loop could hang up forever when we enable TLS+Multifd.
The Src multifd_send_0 invokes tls handshake, it sends hello to sever
and wait response.
However, the Dst main qemu loop has been waiting recvmsg() for multifd_recv_1.
Both of Src and Dst main qemu loop are blocking and waiting for reponse which
results in hanging up forever.
Src: (multifd_send_0) Dst: (multifd_recv_1)
multifd_channel_connect migration_channel_process_incoming
multifd_tls_channel_connect migration_tls_channel_process_incoming
multifd_tls_channel_connect qio_channel_tls_handshake_task
qio_channel_tls_handshake gnutls_handshake
qio_channel_tls_handshake_task ...
qcrypto_tls_session_handshake ...
gnutls_handshake ...
... ...
recvmsg (Blocking I/O waiting for response) recvmsg (Blocking I/O waiting for response)
Fix this by offloadinig handshake work to a background thread.
Reported-by: Yan Jin <jinyan12@huawei.com>
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Chuan Zheng <zhengchuan@huawei.com>
Message-Id: <1604643893-8223-1-git-send-email-zhengchuan@huawei.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The '%u' conversion specifier is for decimal notation.
When prefixing a format with '0x', we want the hexadecimal
specifier ('%x').
Inspired-by: Dov Murik <dovmurik@linux.vnet.ibm.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20201103112558.2554390-5-philmd@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
we should set ram_bulk_stage to false after ram_state_init,
otherwise the bitmap will be unused in migration_bitmap_find_dirty.
all pages in ram cache will be flushed to the ram of secondary guest
for each checkpoint.
Signed-off-by: Lei Rao <lei.rao@intel.com>
Signed-off-by: Derek Su <dereksu@qnap.com>
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Reviewed-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Reviewed-by: Zhang Chen <chen.zhang@intel.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The new migrate_send_rp_req_pages_pending() call should greatly improve
destination responsiveness because it will resync faulted address after
postcopy recovery. However it is also the 1st place to initiate the page
request from the main thread.
One thing is overlooked on that migrate_send_rp_message_req_pages() is not
designed to be thread-safe. So if we wake the fault thread before syncing all
the faulted pages in the main thread, it means they can race.
Postpone the wake up operation after the sync of faulted addresses.
Fixes: 0c26781c09 ("migration: Sync requested pages after postcopy recovery")
Tested-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20201102153010.11979-3-peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
When postcopy recover happens, we need to reset last_rb after each return of
postcopy_pause_fault_thread() because that means we just got the postcopy
migration continued.
Unify this reset to the place right before we want to kick the fault thread
again, when we get the command MIG_CMD_POSTCOPY_RESUME from source.
This is actually more than that - because the main thread on destination will
now be able to call migrate_send_rp_req_pages_pending() too, so the fault
thread is not the only user of last_rb now. Move the reset earlier will allow
the first call to migrate_send_rp_req_pages_pending() to use the reset value
even if called from the main thread.
(NOTE: this is not a real fix to 0c26781c09 mentioned below, however it is just
a mark that when picking up 0c26781c09 we'd better have this one too; the real
fix will come later)
Fixes: 0c26781c09 ("migration: Sync requested pages after postcopy recovery")
Tested-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20201102153010.11979-2-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Added amount of bytes transferred to the VM at destination by all VFIO
devices
Signed-off-by: Kirti Wankhede <kwankhede@nvidia.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Another go at Peter's postcopy fixes
Cleanups from Bihong Yu and Peter Maydell.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
-----BEGIN PGP SIGNATURE-----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=OL0Q
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgilbert/tags/pull-migration-20201026a' into staging
migration pull: 2020-10-26
Another go at Peter's postcopy fixes
Cleanups from Bihong Yu and Peter Maydell.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
# gpg: Signature made Mon 26 Oct 2020 16:17:03 GMT
# gpg: using RSA key 45F5C71B4A0CB7FB977A9FA90516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>" [full]
# Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A 9FA9 0516 331E BC5B FDE7
* remotes/dgilbert/tags/pull-migration-20201026a:
migration-test: Only hide error if !QTEST_LOG
migration/postcopy: Release fd before going into 'postcopy-pause'
migration: Sync requested pages after postcopy recovery
migration: Maintain postcopy faulted addresses
migration: Introduce migrate_send_rp_message_req_pages()
migration: Pass incoming state into qemu_ufd_copy_ioctl()
migration: using trace_ to replace DPRINTF
migration: Delete redundant spaces
migration: Open brace '{' following function declarations go on the next line
migration: Do not initialise statics and globals to 0 or NULL
migration: Add braces {} for if statement
migration: Open brace '{' following struct go on the same line
migration: Add spaces around operator
migration: Don't use '#' flag of printf format
migration: Do not use C99 // comments
migration: Drop unused VMSTATE_FLOAT64 support
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Logically below race could trigger with the old code:
test program migration thread
------------ ----------------
wait_until('postcopy-pause')
postcopy_pause()
set_state('postcopy-pause')
do_postcopy_recover()
arm s->to_dst_file with new fd
release s->to_dst_file [1]
Here [1] could have released the just-installed recoverying channel. Then the
migration could hang without really resuming.
Instead, it should be very safe to release the fd before setting the state into
'postcopy-pause', because there's no reason for any other thread to touch it
during 'postcopy-active'.
Dave reported a very rare postcopy recovery hang that the migration-test
program waited for the migration to complete in migrate_postcopy_complete().
We do suspect it's the same thing that we're gonna fix here. Hard to tell.
However since we've noticed this, fix this irrelevant of the hang report.
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20201021212721.440373-6-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
We synchronize the requested pages right after a postcopy recovery happens.
This helps to synchronize the prioritized pages on source so that the faulted
threads can be served faster.
Reported-by: Xiaohui Li <xiaohli@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20201021212721.440373-5-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Maintain a list of faulted addresses on the destination host for which we're
waiting on. This is implemented using a GTree rather than a real list to make
sure even there're plenty of vCPUs/threads that are faulting, the lookup will
still be fast with O(log(N)) (because we'll do that after placing each page).
It should bring a slight overhead, but ideally that shouldn't be a big problem
simply because in most cases the requested page list will be short.
Actually we did similar things for postcopy blocktime measurements. This patch
didn't use that simply because:
(1) blocktime measurement is towards vcpu threads only, but here we need to
record all faulted addresses, including main thread and external
thread (like, DPDK via vhost-user).
(2) blocktime measurement will require UFFD_FEATURE_THREAD_ID, but here we
don't want to add that extra dependency on the kernel version since not
necessary. E.g., we don't need to know which thread faulted on which
page, we also don't care about multiple threads faulting on the same
page. But we only care about what addresses are faulted so waiting for a
page copying from src.
(3) blocktime measurement is not enabled by default. However we need this by
default especially for postcopy recover.
Another thing to mention is that this patch introduced a new mutex to serialize
the receivedmap and the page_requested tree, however that serialization does
not cover other procedures like UFFDIO_COPY.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20201021212721.440373-4-peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This is another layer wrapper for sending a page request to the source VM. The
new migrate_send_rp_message_req_pages() will be used elsewhere in coming
patches.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20201021212721.440373-3-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
It'll be used in follow up patches to access more fields out of it. Meanwhile
fetch the userfaultfd inside the function.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20201021212721.440373-2-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Bihong Yu <yubihong@huawei.com>
Message-Id: <1603179176-5360-1-git-send-email-yubihong@huawei.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Bihong Yu <yubihong@huawei.com>
Reviewed-by: Chuan Zheng <zhengchuan@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <1603163448-27122-9-git-send-email-yubihong@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Bihong Yu <yubihong@huawei.com>
Reviewed-by: Chuan Zheng <zhengchuan@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <1603163448-27122-8-git-send-email-yubihong@huawei.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Bihong Yu <yubihong@huawei.com>
Reviewed-by: Chuan Zheng <zhengchuan@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <1603163448-27122-7-git-send-email-yubihong@huawei.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Bihong Yu <yubihong@huawei.com>
Reviewed-by: Chuan Zheng <zhengchuan@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <1603163448-27122-6-git-send-email-yubihong@huawei.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Bihong Yu <yubihong@huawei.com>
Reviewed-by: Chuan Zheng <zhengchuan@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <1603163448-27122-5-git-send-email-yubihong@huawei.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Bihong Yu <yubihong@huawei.com>
Reviewed-by: Chuan Zheng <zhengchuan@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <1603163448-27122-4-git-send-email-yubihong@huawei.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Bihong Yu <yubihong@huawei.com>
Reviewed-by: Chuan Zheng <zhengchuan@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <1603163448-27122-3-git-send-email-yubihong@huawei.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Bihong Yu <yubihong@huawei.com>
Reviewed-by: Chuan Zheng <zhengchuan@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <1603163448-27122-2-git-send-email-yubihong@huawei.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Commit ef96e3ae96 in January 2019 removed the last user of the
VMSTATE_FLOAT64* macros. These were used by targets which defined
their floating point register file as an array of 'float64'.
We used to try to maintain a stricter distinction between
'float64' (a type for holding an integer representing an IEEE float)
and 'uint64_t', including having a debug option for 'float64' being
a struct and supposedly mandatory macros for converting between
float64 and uint64_t. We no longer think that's a usefully
strong distinction to draw and we allow ourselves to freely
assume that float64 really is just a 64-bit integer type, so
for new targets we would simply recommend use of the uint64_t type
for a floating point register file. The float64 type remains
as a useful way of documenting in the type signature of helper
functions and the like that they expect to receive an IEEE float
from the TCG generated code rather than an arbitrary integer.
Since the VMSTATE_FLOAT64* macros have no remaining users and
we don't recommend new code uses them, delete them.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20201022120830.5938-1-peter.maydell@linaro.org>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
A default value is provided for the variable 'bitmap_name' to avoid
a compiler warning.
The compiler showed the warning:
migration/block-dirty-bitmap.c:1090:13: warning: ‘bitmap_name’
may be used uninitialized in this function [-Wmaybe-uninitialized]
g_strlcpy(s->bitmap_name, bitmap_name, sizeof(s->bitmap_name));
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Chen Qun <kuhn.chenqun@huawei.com>
Message-Id: <20201014114430.1898684-1-kuhn.chenqun@huawei.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
[eblake: commit message grammar tweaks]
Signed-off-by: Eric Blake <eblake@redhat.com>
sectors_per_chunk is a 64 bit integer, but the calculation is done in 32
bits, leading to an overflow for coarse bitmap granularities.
If that results in the value 0, it leads to a hang where no progress is
made but send_bitmap_bits is constantly called with nr_sectors being 0.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
Message-Id: <20201021144456.1072-1-s.reiter@proxmox.com>
Fixes: b35ebdf07 migration: add postcopy migration of dirty bitmaps
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: Use correct type for 8ULL, use () to avoid overflow]
Signed-off-by: Eric Blake <eblake@redhat.com>
Restricting xen-set-global-dirty-log and xen-load-devices-state
commands migration.json pulls slightly less QAPI-generated code
into user-mode and tools.
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20201012121536.3381997-6-philmd@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Be consistent creating all the libraries in the main meson.build file.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20201006125602.2311423-6-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Make dirty_rate field optional, present dirty rate only when querying
the rate has completed.
The qmp results is shown as follow:
@unstarted:
{"return":{"status":"unstarted","start-time":0,"calc-time":0},"id":"libvirt-12"}
@measuring:
{"return":{"status":"measuring","start-time":102931,"calc-time":1},"id":"libvirt-85"}
@measured:
{"return":{"status":"measured","dirty-rate":4,"start-time":150146,"calc-time":1},"id":"libvirt-15"}
Signed-off-by: Chuan Zheng <zhengchuan@huawei.com>
Reviewed-by: David Edmondson <david.edmondson@oracle.com>
Message-Id: <1601350938-128320-3-git-send-email-zhengchuan@huawei.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Querying could include both the start-time and the calc-time while at the measuring
state, allowing a caller to determine when they should expect to come back looking
for a result.
Signed-off-by: Chuan Zheng <zhengchuan@huawei.com>
Message-Id: <1601350938-128320-2-git-send-email-zhengchuan@huawei.com>
Reviewed-by: David Edmondson <david.edmondson@oracle.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
cur_mon really needs to be coroutine-local as soon as we move monitor
command handlers to coroutines and let them yield. As a first step, just
remove all direct accesses to cur_mon so that we can implement this in
the getter function later.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201005155855.256490-4-kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Non-empty record/replay queue prevents saving and loading the VM state,
because it includes pending bottom halves and block coroutines.
But when the new VM state is loaded, we don't have to preserve the consistency
of the current state anymore. Therefore this patch just flushes the queue
allowing the coroutines to finish and removes checking for empty rr queue
for load_snapshot function.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <160174521762.12451.15752448887893855757.stgit@pasha-ThinkPad-X280>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Saving icount as a parameters of the snapshot allows navigation between
them in the execution replay scenario.
This information can be used for finding a specific snapshot for proceeding
the recorded execution to the specific moment of the time.
E.g., 'reverse step' action (introduced in one of the following patches)
needs to load the nearest snapshot which is prior to the current moment
of time.
This patch also updates snapshot test which verifies qemu monitor output.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Acked-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
--
v4 changes:
- squashed format update with test output update
v7 changes:
- introduced the spaces between the fields in snapshot info output
- updated the test to match new field widths
Message-Id: <160174518865.12451.14327573383978752463.stgit@pasha-ThinkPad-X280>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
GCC 9.3.0 on Ubuntu complains:
In file included from /usr/include/string.h:495,
from /home/travis/build/huth/qemu/include/qemu/osdep.h:87,
from ../migration/global_state.c:13:
In function ‘strncpy’,
inlined from ‘global_state_store_running’ at ../migration/global_state.c:47:5:
/usr/include/x86_64-linux-gnu/bits/string_fortified.h:106:10: error:
‘__builtin_strncpy’ specified bound 100 equals destination size [-Werror=stringop-truncation]
106 | return __builtin___strncpy_chk (__dest, __src, __len, __bos (__dest));
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
... but we apparently really want to do a strncpy here - the size is already
checked with the assert() statement right in front of it. To silence the
warning, simply replace it with our strpadcpy() function.
Suggested-by: Philippe Mathieu-Daudé <philmd@redhat.com> (two years ago)
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200918103430.297167-4-thuth@redhat.com>
Message-Id: <20200925154027.12672-5-alex.bennee@linaro.org>
One patch in the last pull broke test 068 which
does a pair of vmload's.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
-----BEGIN PGP SIGNATURE-----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=eW0Z
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgilbert/tags/pull-migration-20200928a' into staging
Migration: Revert one patch for 068 fix
One patch in the last pull broke test 068 which
does a pair of vmload's.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
# gpg: Signature made Mon 28 Sep 2020 16:19:17 BST
# gpg: using RSA key 45F5C71B4A0CB7FB977A9FA90516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>" [full]
# Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A 9FA9 0516 331E BC5B FDE7
* remotes/dgilbert/tags/pull-migration-20200928a:
Revert "migration: Properly destroy variables on incoming side"
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
add trace points for multifd-tls for debug.
Signed-off-by: Chuan Zheng <zhengchuan@huawei.com>
Signed-off-by: Yan Jin <jinyan12@huawei.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <1600139042-104593-7-git-send-email-zhengchuan@huawei.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Similar like migration main thread, we need to do handshake
for each multifd thread.
Signed-off-by: Chuan Zheng <zhengchuan@huawei.com>
Signed-off-by: Yan Jin <jinyan12@huawei.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <1600139042-104593-6-git-send-email-zhengchuan@huawei.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
multifd channel cleanup is need if multifd handshake failed,
let's extract it.
Signed-off-by: Chuan Zheng <zhengchuan@huawei.com>
Signed-off-by: Yan Jin <jinyan12@huawei.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <1600139042-104593-5-git-send-email-zhengchuan@huawei.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Since multifd creation is async with migration_channel_connect, we should
pass the hostname from MigrationState to MultiFDSendParams.
Signed-off-by: Chuan Zheng <zhengchuan@huawei.com>
Signed-off-by: Yan Jin <jinyan12@huawei.com>
Message-Id: <1600139042-104593-4-git-send-email-zhengchuan@huawei.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
migration_tls_client_create will be used in multifd-tls, let's
extract it.
Signed-off-by: Chuan Zheng <zhengchuan@huawei.com>
Signed-off-by: Yan Jin <jinyan12@huawei.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <1600139042-104593-3-git-send-email-zhengchuan@huawei.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
hostname is need in multifd-tls, save hostname into MigrationState.
Signed-off-by: Chuan Zheng <zhengchuan@huawei.com>
Signed-off-by: Yan Jin <jinyan12@huawei.com>
Message-Id: <1600139042-104593-2-git-send-email-zhengchuan@huawei.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
max-bandwidth is set by default to 32 MiB/s (256 Mib/s)
since 2008 (5bb7910af0).
Most of the CPUs can dirty memory faster than that now,
and this is clearly a problem with POWER where the page
size is 64 kiB and not 4 KiB.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20200921144957.979989-1-lvivier@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
When running the xen-save-devices-state QMP command, if the filename
already exists it will be truncated before dumping the devices' state
into it.
Signed-off-by: Dov Murik <dovmurik@linux.vnet.ibm.com>
Message-Id: <20200921094830.114028-1-dovmurik@linux.vnet.ibm.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Add trace_calls to make it easier to debug
Signed-off-by: Chuan Zheng <zhengchuan@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: David Edmondson <david.edmondson@oracle.com>
Message-Id: <1600237327-33618-13-git-send-email-zhengchuan@huawei.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Implement qmp_cal_dirty_rate()/qmp_get_dirty_rate() function which could be called
Signed-off-by: Chuan Zheng <zhengchuan@huawei.com>
Message-Id: <1600237327-33618-12-git-send-email-zhengchuan@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
atomic function fixup
Wording fixup in migration.json based on Eric's review
Implement calculate_dirtyrate() function.
Signed-off-by: Chuan Zheng <zhengchuan@huawei.com>
Signed-off-by: YanYing Zhuang <ann.zhuangyanying@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Message-Id: <1600237327-33618-11-git-send-email-zhengchuan@huawei.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Implement is_sample_period_valid() to check if the sample period is vaild and
do set_sample_page_period() to sleep specific time between sample actions.
Signed-off-by: Chuan Zheng <zhengchuan@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: David Edmondson <david.edmondson@oracle.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Message-Id: <1600237327-33618-10-git-send-email-zhengchuan@huawei.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
In order to sample real RAM, skip ramblock with size below MIN_RAMBLOCK_SIZE
which is set as 128M.
Signed-off-by: Chuan Zheng <zhengchuan@huawei.com>
Reviewed-by: David Edmondson <david.edmondson@oracle.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Message-Id: <1600237327-33618-9-git-send-email-zhengchuan@huawei.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Compare page hash results for recorded sampled page.
Signed-off-by: Chuan Zheng <zhengchuan@huawei.com>
Signed-off-by: YanYing Zhuang <ann.zhuangyanying@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Message-Id: <1600237327-33618-8-git-send-email-zhengchuan@huawei.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Record hash results for each sampled page, crc32 is taken to calculate
hash results for each sampled length in TARGET_PAGE_SIZE.
Signed-off-by: Chuan Zheng <zhengchuan@huawei.com>
Signed-off-by: YanYing Zhuang <ann.zhuangyanying@huawei.com>
Reviewed-by: David Edmondson <david.edmondson@oracle.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Message-Id: <1600237327-33618-7-git-send-email-zhengchuan@huawei.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
RAMBLOCK_FOREACH_MIGRATABLE is need in dirtyrate measure,
move the existing definition up into migration/ram.h
Signed-off-by: Chuan Zheng <zhengchuan@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: David Edmondson <david.edmondson@oracle.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Message-Id: <1600237327-33618-6-git-send-email-zhengchuan@huawei.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Add dirtyrate statistics functions to record/update dirtyrate info.
Signed-off-by: Chuan Zheng <zhengchuan@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Message-Id: <1600237327-33618-5-git-send-email-zhengchuan@huawei.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Add RamblockDirtyInfo to store sampled page info of each ramblock.
Signed-off-by: Chuan Zheng <zhengchuan@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: David Edmondson <david.edmondson@oracle.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Message-Id: <1600237327-33618-4-git-send-email-zhengchuan@huawei.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
add DirtyRateStatus to denote calculating status.
Signed-off-by: Chuan Zheng <zhengchuan@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Message-Id: <1600237327-33618-3-git-send-email-zhengchuan@huawei.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
atomic name fixup
Add get_dirtyrate_thread() functions to setup query-dirtyrate
framework.
Signed-off-by: Chuan Zheng <zhengchuan@huawei.com>
Signed-off-by: YanYing Zhuang <ann.zhuangyanying@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: David Edmondson <david.edmondson@oracle.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Message-Id: <1600237327-33618-2-git-send-email-zhengchuan@huawei.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
We duplicated the logic of maintaining the last_rb variable at both callers of
this function. Pass *rb pointer into the function so that we can avoid
duplicating the logic. Also, when we have the rb pointer, it's also easier to
remove the original 2nd & 4th parameters, because both of them (name of the
ramblock when needed, or the page size) can be fetched from the ramblock
pointer too.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20200908203022.341615-3-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
In migration_incoming_state_destroy(), we've got a few variables that aren't
destroyed properly, namely:
main_thread_load_event
postcopy_pause_sem_dst
postcopy_pause_sem_fault
rp_mutex
Destroy them properly.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20200908203022.341615-2-peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
clang's C11 atomic_fetch_*() functions only take a C11 atomic type
pointer argument. QEMU uses direct types (int, etc) and this causes a
compiler error when a QEMU code calls these functions in a source file
that also included <stdatomic.h> via a system header file:
$ CC=clang CXX=clang++ ./configure ... && make
../util/async.c:79:17: error: address argument to atomic operation must be a pointer to _Atomic type ('unsigned int *' invalid)
Avoid using atomic_*() names in QEMU's atomic.h since that namespace is
used by <stdatomic.h>. Prefix QEMU's APIs with 'q' so that atomic.h
and <stdatomic.h> can co-exist. I checked /usr/include on my machine and
searched GitHub for existing "qatomic_" users but there seem to be none.
This patch was generated using:
$ git grep -h -o '\<atomic\(64\)\?_[a-z0-9_]\+' include/qemu/atomic.h | \
sort -u >/tmp/changed_identifiers
$ for identifier in $(</tmp/changed_identifiers); do
sed -i "s%\<$identifier\>%q$identifier%g" \
$(git grep -I -l "\<$identifier\>")
done
I manually fixed line-wrap issues and misaligned rST tables.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200923105646.47864-1-stefanha@redhat.com>
I found that there are many spelling errors in the comments of qemu,
so I used the spellcheck tool to check the spelling errors
and finally found some spelling errors in the migration folder.
Signed-off-by: zhaolichang <zhaolichang@huawei.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200917075029.313-3-zhaolichang@huawei.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
- qemu-img create: Fail gracefully when backing file is an empty string
- Fixes related to filter block nodes ("Deal with filters" series)
- block/nvme: Various cleanups required to use multiple queues
- block/nvme: Use NvmeBar structure from "block/nvme.h"
- file-win32: Fix "locking" option
- iotests: Allow running from different directory
-----BEGIN PGP SIGNATURE-----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=gaaW
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches:
- qemu-img create: Fail gracefully when backing file is an empty string
- Fixes related to filter block nodes ("Deal with filters" series)
- block/nvme: Various cleanups required to use multiple queues
- block/nvme: Use NvmeBar structure from "block/nvme.h"
- file-win32: Fix "locking" option
- iotests: Allow running from different directory
# gpg: Signature made Thu 10 Sep 2020 10:11:19 BST
# gpg: using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6
# gpg: issuer "kwolf@redhat.com"
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream: (65 commits)
block/qcow2-cluster: Add missing "fallthrough" annotation
block/nvme: Pair doorbell registers
block/nvme: Use generic NvmeBar structure
block/nvme: Group controller registers in NVMeRegs structure
file-win32: Fix "locking" option
iotests: Allow running from different directory
iotests: Test committing to overridden backing
iotests: Add test for commit in sub directory
iotests: Add filter mirror test cases
iotests: Add filter commit test cases
iotests: Let complete_and_wait() work with commit
iotests: Test that qcow2's data-file is flushed
block: Leave BDS.backing_{file,format} constant
block: Inline bdrv_co_block_status_from_*()
blockdev: Fix active commit choice
block: Drop backing_bs()
qemu-img: Use child access functions
nbd: Use CAF when looking for dirty bitmap
commit: Deal with filters
backup: Deal with filters
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Some trace points are attributed to the wrong source file. Happens
when we neglect to update trace-events for code motion, or add events
in the wrong place, or misspell the file name.
Clean up with help of scripts/cleanup-trace-events.pl. Funnies
requiring manual post-processing:
* accel/tcg/cputlb.c trace points are in trace-events.
* block.c and blockdev.c trace points are in block/trace-events.
* hw/block/nvme.c uses the preprocessor to hide its trace point use
from cleanup-trace-events.pl.
* hw/tpm/tpm_spapr.c uses pseudo trace point tpm_spapr_show_buffer to
guard debug code.
* include/hw/xen/xen_common.h trace points are in hw/xen/trace-events.
* linux-user/trace-events abbreviates a tedious list of filenames to
*/signal.c.
* net/colo-compare and net/filter-rewriter.c use pseudo trace points
colo_compare_miscompare and colo_filter_rewriter_debug to guard
debug code.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200806141334.3646302-5-armbru@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Tracked down with the help of scripts/cleanup-trace-events.pl.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-id: 20200806141334.3646302-4-armbru@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Some typedefs and macros are defined after the type check macros.
This makes it difficult to automatically replace their
definitions with OBJECT_DECLARE_TYPE.
Patch generated using:
$ ./scripts/codeconverter/converter.py -i \
--pattern=QOMStructTypedefSplit $(git grep -l '' -- '*.[ch]')
which will split "typdef struct { ... } TypedefName"
declarations.
Followed by:
$ ./scripts/codeconverter/converter.py -i --pattern=MoveSymbols \
$(git grep -l '' -- '*.[ch]')
which will:
- move the typedefs and #defines above the type check macros
- add missing #include "qom/object.h" lines if necessary
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20200831210740.126168-9-ehabkost@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20200831210740.126168-10-ehabkost@redhat.com>
Message-Id: <20200831210740.126168-11-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Places that use patterns like
if (bs->drv->is_filter && bs->file) {
... something about bs->file->bs ...
}
should be
BlockDriverState *filtered = bdrv_filter_bs(bs);
if (filtered) {
... something about @filtered ...
}
instead.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Currently migration_tls_get_creds() adds the reference of creds
but there was no place to unref it. So the OBJECT(creds) will
never be freed and result in memory leak.
The leak stack:
Direct leak of 104 byte(s) in 1 object(s) allocated from:
#0 0xffffa88bd20b in __interceptor_malloc (/usr/lib64/libasan.so.4+0xd320b)
#1 0xffffa7f0cb1b in g_malloc (/usr/lib64/libglib-2.0.so.0+0x58b1b)
#2 0x14b58cb in object_new_with_type qom/object.c:634
#3 0x14b597b in object_new qom/object.c:645
#4 0x14c0e4f in user_creatable_add_type qom/object_interfaces.c:59
#5 0x141c78b in qmp_object_add qom/qom-qmp-cmds.c:312
#6 0x140e513 in qmp_marshal_object_add qapi/qapi-commands-qom.c:279
#7 0x176ba97 in do_qmp_dispatch qapi/qmp-dispatch.c:165
#8 0x176bee7 in qmp_dispatch qapi/qmp-dispatch.c:208
#9 0x136e337 in monitor_qmp_dispatch monitor/qmp.c:150
#10 0x136eae3 in monitor_qmp_bh_dispatcher monitor/qmp.c:239
#11 0x1852e93 in aio_bh_call util/async.c:89
#12 0x18531b7 in aio_bh_poll util/async.c:117
#13 0x18616bf in aio_dispatch util/aio-posix.c:459
#14 0x1853f37 in aio_ctx_dispatch util/async.c:268
#15 0xffffa7f06a7b in g_main_context_dispatch (/usr/lib64/libglib-2.0.so.0+0x52a7b)
Since we're fine to use the borrowed reference when using the creds,
so just remove the object_ref() in migration_tls_get_creds().
Signed-off-by: Zhenyu Ye <yezhenyu2@huawei.com>
Message-Id: <20200722033228.71-1-yezhenyu2@huawei.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
With blockdev, a BlockDriverState may not have a device name,
so using a node name is required as an alternative.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20200827111606.1408275-2-berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The vsock channel is more widely use in some new features, for example,
the Nitro/Enclave. It can also be used as the migration channel.
Signed-off-by: Longpeng(Mike) <longpeng2@huawei.com>
Message-Id: <20200806074030.174-3-longpeng2@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Currently, the only difference of tcp channel and unix channel in
migration/socket.c is the way to build SocketAddress, but socket_parse()
can handle these two types, so use it to instead of tcp_build_address()
and unix_build_address().
The socket-type channel can be further unified based on the up, this
would be helpful for us to add other socket-type channels.
Signed-off-by: Longpeng(Mike) <longpeng2@huawei.com>
Message-Id: <20200806074030.174-2-longpeng2@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Rename the macros to make them consistent with the MIGRATION_OBJ
macro name.
This will make future conversion to OBJECT_DECLARE* easier.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Tested-By: Roman Bolshakov <r.bolshakov@yadro.com>
Message-Id: <20200825192110.3528606-51-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This migration parameter allows mapping block node names and bitmap
names to aliases for the purpose of block dirty bitmap migration.
This way, management tools can use different node and bitmap names on
the source and destination and pass the mapping of how bitmaps are to be
transferred to qemu (on the source, the destination, or even both with
arbitrary aliases in the migration stream).
While touching this code, fix a bug where bitmap names longer than 255
bytes would fail an assertion in qemu_put_counted_string().
Suggested-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200820150725.68687-2-mreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Meson doesn't enjoy the same flexibility we have with Make in choosing
the include path. In particular the tracing headers are using
$(build_root)/$(<D).
In order to keep the include directives unchanged,
the simplest solution is to generate headers with patterns like
"trace/trace-audio.h" and place forwarding headers in the source tree
such that for example "audio/trace.h" includes "trace/trace-audio.h".
This patch is too ugly to be applied to the Makefiles now. It's only
a way to separate the changes to the tracing header files from the
Meson rewrite of the tracing logic.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Noticed while reviewing the file for newer patches.
Fixes: b35ebdf076
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200727203206.134996-1-eblake@redhat.com>
First, if only bitmaps postcopy is enabled (and not ram postcopy)
postcopy_pause_incoming crashes on an assertion
assert(mis->to_src_file).
And anyway, bitmaps postcopy is not prepared to be somehow recovered.
The original idea instead is that if bitmaps postcopy failed, we just
lose some bitmaps, which is not critical. So, on failure we just need
to remove unfinished bitmaps and guest should continue execution on
destination.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200727194236.19551-18-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
If target is turned off prior to postcopy finished, target crashes
because busy bitmaps are found at shutdown.
Canceling incoming migration helps, as it removes all unfinished (and
therefore busy) bitmaps.
Similarly on source we crash in bdrv_close_all which asserts that all
bdrv states are removed, because bdrv states involved into dirty bitmap
migration are referenced by it. So, we need to cancel outgoing
migration as well.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Message-Id: <20200727194236.19551-17-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Bitmaps data is not critical, and we should not fail the migration (or
use postcopy recovering) because of dirty-bitmaps migration failure.
Instead we should just lose unfinished bitmaps.
Still we have to report io stream violation errors, as they affect the
whole migration stream.
While touching this, tighten code that was previously blindly calling
malloc on a size read from the migration stream, as a corrupted stream
(perhaps from a malicious user) should not be able to convince us to
allocate an inordinate amount of memory.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200727194236.19551-16-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: typo fixes, enhance commit message]
Signed-off-by: Eric Blake <eblake@redhat.com>
Keep bitmap state for disabled bitmaps too. Keep the state until the
end of the process. It's needed for the following commit to implement
bitmap postcopy canceling.
To clean-up the new list the following logic is used:
We need two events to consider bitmap migration finished:
1. chunk with DIRTY_BITMAP_MIG_FLAG_COMPLETE flag should be received
2. dirty_bitmap_mig_before_vm_start should be called
These two events may come in any order, so we understand which one is
last, and on the last of them we remove bitmap migration state from the
list.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Message-Id: <20200727194236.19551-15-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
bdrv_enable_dirty_bitmap_locked() call does nothing, as if we are in
postcopy, bitmap successor must be enabled, and reclaim operation will
enable the bitmap.
So, actually we need just call _reclaim_ in both if branches, and
making differences only to add an assertion seems not really good. The
logic becomes simple: on load complete we do reclaim and that's all.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Message-Id: <20200727194236.19551-14-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
finish_lock is bad name, as lock used not only on process end.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Message-Id: <20200727194236.19551-13-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Move all state variables into one global struct. Reduce global
variable usage, utilizing opaque pointer where possible.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Message-Id: <20200727194236.19551-12-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
No reasons to keep two public init functions.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20200727194236.19551-11-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Rename dirty_bitmap_mig_cleanup to dirty_bitmap_do_save_cleanup, to
stress that it is on save part.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200727194236.19551-10-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Rename types to be symmetrical for load/save part and shorter.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200727194236.19551-9-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Using the _locked version of bdrv_enable_dirty_bitmap to bypass locking
is wrong as we do not already own the mutex. Moreover, the adjacent
call to bdrv_dirty_bitmap_enable_successor grabs the mutex.
Fixes: 58f72b965e9e1q
Cc: qemu-stable@nongnu.org # v3.0
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200727194236.19551-8-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
We shouldn't fail when finding an unnamed bitmap in a unnamed node or
node with auto-generated node name, as bitmap migration ignores such
bitmaps in the first place.
Fixes: 82640edb88
Fixes: 4ff5cc121b
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200626130658.76498-1-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: commit message grammar tweaks]
Signed-off-by: Eric Blake <eblake@redhat.com>
Remove superfluous breaks, as there is a "return" before them.
Signed-off-by: Liao Pingfang <liao.pingfang@zte.com.cn>
Signed-off-by: Yi Wang <wang.yi59@zte.com.cn>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
qemu_fclose() could return error, f.e. if bdrv_co_flush() will return
the error.
This validation will become more important once we will start waiting of
asynchronous IO operations, started from bdrv_write_vmstate(), which are
coming soon.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
CC: Max Reitz <mreitz@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Fam Zheng <fam@euphon.net>
CC: Juan Quintela <quintela@redhat.com>
CC: Denis Plotnikov <dplotnikov@virtuozzo.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
"tmp.tls_hostname" and "tmp.tls_creds" allocated by migrate_params_test_apply()
is forgot to free at the end of qmp_migrate_set_parameters(). Fix that.
The leak stack:
Direct leak of 2 byte(s) in 2 object(s) allocated from:
#0 0xffffb597c20b in __interceptor_malloc (/usr/lib64/libasan.so.4+0xd320b)
#1 0xffffb52dcb1b in g_malloc (/usr/lib64/libglib-2.0.so.0+0x58b1b)
#2 0xffffb52f8143 in g_strdup (/usr/lib64/libglib-2.0.so.0+0x74143)
#3 0xaaaac52447fb in migrate_params_test_apply (/usr/src/debug/qemu-4.1.0/migration/migration.c:1377)
#4 0xaaaac52fdca7 in qmp_migrate_set_parameters (/usr/src/debug/qemu-4.1.0/qapi/qapi-commands-migration.c:192)
#5 0xaaaac551d543 in qmp_dispatch (/usr/src/debug/qemu-4.1.0/qapi/qmp-dispatch.c:165)
#6 0xaaaac52a0a8f in qmp_dispatch (/usr/src/debug/qemu-4.1.0/monitor/qmp.c:125)
#7 0xaaaac52a1c7f in monitor_qmp_dispatch (/usr/src/debug/qemu-4.1.0/monitor/qmp.c:214)
#8 0xaaaac55cb0cf in aio_bh_call (/usr/src/debug/qemu-4.1.0/util/async.c:117)
#9 0xaaaac55d4543 in aio_bh_poll (/usr/src/debug/qemu-4.1.0/util/aio-posix.c:459)
#10 0xaaaac55cae0f in aio_dispatch (/usr/src/debug/qemu-4.1.0/util/async.c:268)
#11 0xffffb52d6a7b in g_main_context_dispatch (/usr/lib64/libglib-2.0.so.0+0x52a7b)
#12 0xaaaac55d1e3b(/usr/bin/qemu-kvm-4.1.0+0x1622e3b)
#13 0xaaaac4e314bb(/usr/bin/qemu-kvm-4.1.0+0xe824bb)
#14 0xaaaac47f45ef(/usr/bin/qemu-kvm-4.1.0+0x8455ef)
#15 0xffffb4bfef3f in __libc_start_main (/usr/lib64/libc.so.6+0x23f3f)
#16 0xaaaac47ffacb(/usr/bin/qemu-kvm-4.1.0+0x850acb)
Direct leak of 2 byte(s) in 2 object(s) allocated from:
#0 0xffffb597c20b in __interceptor_malloc (/usr/lib64/libasan.so.4+0xd320b)
#1 0xffffb52dcb1b in g_malloc (/usr/lib64/libglib-2.0.so.0+0x58b1b)
#2 0xffffb52f8143 in g_strdup (/usr/lib64/libglib-2.0.so.0+0x74143)
#3 0xaaaac5244893 in migrate_params_test_apply (/usr/src/debug/qemu-4.1.0/migration/migration.c:1382)
#4 0xaaaac52fdca7 in qmp_migrate_set_parameters (/usr/src/debug/qemu-4.1.0/qapi/qapi-commands-migration.c:192)
#5 0xaaaac551d543 in qmp_dispatch (/usr/src/debug/qemu-4.1.0/qapi/qmp-dispatch.c)
#6 0xaaaac52a0a8f in qmp_dispatch (/usr/src/debug/qemu-4.1.0/monitor/qmp.c:125)
#7 0xaaaac52a1c7f in monitor_qmp_dispatch (/usr/src/debug/qemu-4.1.0/monitor/qmp.c:214)
#8 0xaaaac55cb0cf in aio_bh_call (/usr/src/debug/qemu-4.1.0/util/async.c:117)
#9 0xaaaac55d4543 in aio_bh_poll (/usr/src/debug/qemu-4.1.0/util/aio-posix.c:459)
#10 0xaaaac55cae0f in in aio_dispatch (/usr/src/debug/qemu-4.1.0/util/async.c:268)
#11 0xffffb52d6a7b in g_main_context_dispatch (/usr/lib64/libglib-2.0.so.0+0x52a7b)
#12 0xaaaac55d1e3b(/usr/bin/qemu-kvm-4.1.0+0x1622e3b)
#13 0xaaaac4e314bb(/usr/bin/qemu-kvm-4.1.0+0xe824bb)
#14 0xaaaac47f45ef (/usr/bin/qemu-kvm-4.1.0+0x8455ef)
#15 0xffffb4bfef3f in __libc_start_main (/usr/lib64/libc.so.6+0x23f3f)
#16 0xaaaac47ffacb(/usr/bin/qemu-kvm-4.1.0+0x850acb)
Signed-off-by: Chuan Zheng <zhengchuan@huawei.com>
Reviewed-by: KeQian Zhu <zhukeqian1@huawei.com>
Reviewed-by: HaiLiang <zhang.zhanghailiang@huawei.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
move the vcpu throttling functionality into its own module.
This functionality is not specific to any accelerator,
and it is used currently by migration to slow down guests to try to
have migrations converge, and by the cocoa MacOS UI to throttle speed.
cpu-throttle contains the controls to adjust and inspect throttle
settings, start (set) and stop vcpu throttling, and the throttling
function itself that is run periodically on vcpus to make them take a nap.
Execution of the throttling function on all vcpus is triggered by a timer,
registered at module initialization.
No functionality change.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20200629093504.3228-3-cfontana@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
real_dirty_pages becomes equal to total ram size after dirty log sync
in ram_init_bitmaps, the reason is that the bitmap of ramblock is
initialized to be all set, so old path counts them as "real dirty" at
beginning.
This causes wrong dirty rate and false positive throttling.
Signed-off-by: Keqian Zhu <zhukeqian1@huawei.com>
Message-Id: <20200622032037.31112-1-zhukeqian1@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This function returns a boolean success and we're returning -1;
lets just use the 'out' error path.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Fixes: 58b7c17e22 ("Disable mlock around incoming postcopy")
Buglink: https://bugs.launchpad.net/qemu/+bug/1885720
Message-Id: <20200701093557.130096-1-dgilbert@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
COLO will copy all memory in a RAM block, disable discarding of RAM.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Tested-by: Lukas Straub <lukasstraub2@web.de>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Hailiang Zhang <zhang.zhanghailiang@huawei.com>
Cc: Juan Quintela <quintela@redhat.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20200626072248.78761-10-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
RDMA will pin all guest memory (as documented in docs/rdma.txt). We want
to disable RAM block discards - however, to keep it simple use
ram_block_discard_is_required() instead of inhibiting.
Note: It is not sufficient to limit disabling to pin_all. Even when only
conditionally pinning 1 MB chunks, as soon as one page within such a
chunk was discarded and one page not, the discarded pages will be pinned
as well.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Juan Quintela <quintela@redhat.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20200626072248.78761-9-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The only remaining special case is postcopy. It cannot handle
concurrent discards yet, which would result in requesting already sent
pages from the source. Special-case it in virtio-balloon instead.
Introduce migration_in_incoming_postcopy(), to find out if incoming
postcopy is active.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Juan Quintela <quintela@redhat.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20200626072248.78761-7-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
qemu_rdma_registration_stop() uses the ERROR() macro to create, report
to stderr, and store an Error object. The stored Error object is
never used, and its memory is leaked.
Even where ERROR() doesn't leak, it is ill-advised. The whole point
of passing an Error to the caller is letting the caller handle the
error. Error handling may report to stderr, to somewhere else, or not
at all. Also reporting in the callee mixes up concerns that should be
kept separate. Since I don't know what reporting to stderr is
supposed to accomplish, I'm not touching it.
Commit 2a1bc8bde7 "migration/rdma: rdma_accept_incoming_migration fix
error handling" plugged the same leak in
rdma_accept_incoming_migration().
Plug the memory leak the same way: keep the report part, delete the
store part.
The report part uses fprintf(). If it's truly an error, it should use
error_report() instead. But I don't know, so I leave it alone, just
like commit 2a1bc8bde7 did.
Fixes: 2da776db48
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Juan Quintela <quintela@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200630090351.1247703-27-armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
I'm not aware of any immediate bugs in qemu where a second runtime
evaluation of the arguments to MIN() or MAX() causes a problem, but
proactively preventing such abuse is easier than falling prey to an
unintended case down the road. At any rate, here's the conversation
that sparked the current patch:
https://lists.gnu.org/archive/html/qemu-devel/2018-12/msg05718.html
Update the MIN/MAX macros to only evaluate their argument once at
runtime; this uses typeof(1 ? (a) : (b)) to ensure that we are
promoting the temporaries to the same type as the final comparison (we
have to trigger type promotion, as typeof(bitfield) won't compile; and
we can't use typeof((a) + (b)) or even typeof((a) + 0), as some of our
uses of MAX are on void* pointers where such addition is undefined).
However, we are unable to work around gcc refusing to compile ({}) in
a constant context (such as the array length of a static variable),
even when only used in the dead branch of a __builtin_choose_expr(),
so we have to provide a second macro pair MIN_CONST and MAX_CONST for
use when both arguments are known to be compile-time constants and
where the result must also be usable as a constant; this second form
evaluates arguments multiple times but that doesn't matter for
constants. By using a void expression as the expansion if a
non-constant is presented to this second form, we can enlist the
compiler to ensure the double evaluation is not attempted on
non-constants.
Alas, as both macros now rely on compiler intrinsics, they are no
longer usable in preprocessor #if conditions; those will just have to
be open-coded or the logic rewritten into #define or runtime 'if'
conditions (but where the compiler dead-code-elimination will probably
still apply).
I tested that both gcc 10.1.1 and clang 10.0.0 produce errors for all
forms of macro mis-use. As the errors can sometimes be cryptic, I'm
demonstrating the gcc output:
Use of MIN when MIN_CONST is needed:
In file included from /home/eblake/qemu/qemu-img.c:25:
/home/eblake/qemu/include/qemu/osdep.h:249:5: error: braced-group within expression allowed only inside a function
249 | ({ \
| ^
/home/eblake/qemu/qemu-img.c:92:12: note: in expansion of macro ‘MIN’
92 | char array[MIN(1, 2)] = "";
| ^~~
Use of MIN_CONST when MIN is needed:
/home/eblake/qemu/qemu-img.c: In function ‘is_allocated_sectors’:
/home/eblake/qemu/qemu-img.c:1225:15: error: void value not ignored as it ought to be
1225 | i = MIN_CONST(i, n);
| ^
Use of MIN in the preprocessor:
In file included from /home/eblake/qemu/accel/tcg/translate-all.c:20:
/home/eblake/qemu/accel/tcg/translate-all.c: In function ‘page_check_range’:
/home/eblake/qemu/include/qemu/osdep.h:249:6: error: token "{" is not valid in preprocessor expressions
249 | ({ \
| ^
Fix the resulting callsites that used #if or computed a compile-time
constant min or max to use the new macros. cpu-defs.h is interesting,
as CPU_TLB_DYN_MAX_BITS is sometimes used as a constant and sometimes
dynamic.
It may be worth improving glib's MIN/MAX definitions to be saner, but
that is a task for another day.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200625162602.700741-1-eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Migration:
HMP/migration and test changes from Mao Zhongyi
multifd fix from Laurent Vivier
HMP
qom-set partial reversion/change from David Hildenbrand
now you need -j to pass json format, but it's regained the
old 100M type format.
Memory leak fix from Pan Nengyuan
Virtiofs
fchmod seccomp fix from Max Reitz
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
-----BEGIN PGP SIGNATURE-----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=KYWs
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgilbert/tags/pull-migration-20200617a' into staging
Migration (and HMP and virtiofs) pull 2020-06-17
Migration:
HMP/migration and test changes from Mao Zhongyi
multifd fix from Laurent Vivier
HMP
qom-set partial reversion/change from David Hildenbrand
now you need -j to pass json format, but it's regained the
old 100M type format.
Memory leak fix from Pan Nengyuan
Virtiofs
fchmod seccomp fix from Max Reitz
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
# gpg: Signature made Wed 17 Jun 2020 19:34:58 BST
# gpg: using RSA key 45F5C71B4A0CB7FB977A9FA90516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>" [full]
# Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A 9FA9 0516 331E BC5B FDE7
* remotes/dgilbert/tags/pull-migration-20200617a:
migration: fix multifd_send_pages() next channel
docs/xbzrle: update 'cache miss rate' and 'encoding rate' to docs
monitor/hmp-cmds: improvements for the 'info migrate'
monitor/hmp-cmds: add 'goto end' to reduce duplicate code.
monitor/hmp-cmds: delete redundant Error check before invoke hmp_handle_error()
monitor/hmp-cmds: don't silently output when running 'migrate_set_downtime' fails
monitor/hmp-cmds: add units for migrate_parameters
tests/migration: fix unreachable path in stress test
tests/migration: mem leak fix
hmp: Make json format optional for qom-set
qom-hmp-cmds: fix a memleak in hmp_qom_get
virtiofsd: Whitelist fchmod
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
It's reported an error of implicit conversion from "unsigned long" to
"double" when compiling with Clang 10. Simply make the encoding rate 0
when the encoded_size is 0.
Fixes: e460a4b1a4
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reported-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Wei Wang <wei.w.wang@intel.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200617201309.1640952-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
multifd_send_pages() loops around the available channels,
the next channel to use between two calls to multifd_send_pages() is stored
inside a local static variable, next_channel.
It works well, except if the number of channels decreases between two calls
to multifd_send_pages(). In this case, the loop can try to access the
data of a channel that doesn't exist anymore.
The problem can be triggered if we start a migration with a given number of
channels and then we cancel the migration to restart it with a lower number.
This ends generally with an error like:
qemu-system-ppc64: .../util/qemu-thread-posix.c:77: qemu_mutex_lock_impl: Assertion `mutex->initialized' failed.
This patch fixes the error by capping next_channel with the current number
of channels before using it.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20200617113154.593233-1-lvivier@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200610053247.1583243-31-armbru@redhat.com>
This code is not related to hardware emulation.
Move it under accel/ with the other hypervisors.
Reviewed-by: Paul Durrant <paul@xen.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200508100222.7112-1-philmd@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
migration_rate_limit will erroneously ratelimit a shutdown socket,
which causes the migration thread to hang in ram_save_host_page
if the socket is shutdown.
Fix this by explicitly testing if the socket has errors or was
shutdown in migration_rate_limit.
Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Message-Id: <e79085bbe2d46dfa007dd41820194d5e2d4fcd80.1590007004.git.lukasstraub2@web.de>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
If the secondary has to failover during checkpointing, it still is
in the old state (i.e. different state than primary). Thus we can't
expose the primary state until after the checkpoint is sent.
This fixes sporadic connection reset of client connections during
failover.
Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Message-Id: <d4555dd5146a54518c4d9d4efd996b7c745c6687.1589193382.git.lukasstraub2@web.de>
Reviewed-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
If vmstate_loading is true, secondary_vm_do_failover will set failover
status to FAILOVER_STATUS_RELAUNCH and return success without initiating
failover. However, if there is an error during the vmstate_loading
section, failover isn't relaunched. Instead we then wait for
failover on colo_incoming_sem.
Fix this by relaunching failover even if there was an error. Also,
to make this work properly, set vmstate_loading to false when
returning during the vmstate_loading section.
Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Message-Id: <f60b0a8e2fadaaec792e04819dfc46951842d6ba.1589193382.git.lukasstraub2@web.de>
Reviewed-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
If we suceed in receiving ram state, but fail receiving the device
state, there will be a mismatch between the two.
Fix this by flushing the ram cache only after the vmstate has been
received.
Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Message-Id: <3289d007d494cb0e2f05b1cf4ae6a78d300fede3.1589193382.git.lukasstraub2@web.de>
Reviewed-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
cpu_synchronize_all_pre_loadvm() marks all vcpus as dirty, so the
registers are loaded from CPUState before we continue running
the vm. However if we failover during checkpoint, CPUState is not
initialized and the registers are loaded with garbage. This causes
guest hangs and crashes.
Fix this by using cpu_synchronize_all_states(), which initializes
CPUState from the current cpu registers additionally to marking
the vcpus as dirty.
Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Message-Id: <9675031ce557b73ebd10e7bd20ebbf57f30b177c.1589193382.git.lukasstraub2@web.de>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
If multiple packets miscompare in a short timeframe, the semaphore
value will be increased multiple times. This causes multiple
checkpoints even if one would be sufficient.
Fix this by using a event instead of a semaphore for triggering
checkpoints. Now, checkpoint requests will be ignored until the
checkpoint event is sent to colo-compare (which releases the
miscompared packets).
Benchmark results (iperf3):
Client-to-server tcp:
without patch: ~66 Mbit/s
with patch: ~61 Mbit/s
Server-to-client tcp:
without patch: ~702 Kbit/s
with patch: ~16 Mbit/s
Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Message-Id: <fd601ba1beb524aada54ba66e87ebfc12cf4574b.1589193382.git.lukasstraub2@web.de>
Reviewed-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
When error happen in initializing 'rdma_return_path', we should cleanup rdma context
before g_free(rdma) to avoid some memleaks. This patch fix that.
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Pan Nengyuan <pannengyuan@huawei.com>
Message-Id: <20200508100755.7875-3-pannengyuan@huawei.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
'rdma' is NULL when taking the first error branch in rdma_start_incoming_migration.
And it will cause a null pointer access in label 'err'. Fix that.
Fixes: 59c59c67ee
Signed-off-by: Pan Nengyuan <pannengyuan@huawei.com>
Message-Id: <20200508100755.7875-2-pannengyuan@huawei.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Note this is CID 1428762
It actually never worked with libvirt, as auto-generated names are
different on source and destination.
It's unsafe and useless to migrate by auto-generated node-names, so
let's forbid it.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200521220648.3255-7-vsementsov@virtuozzo.com>
[eblake: shorter subject line]
Signed-off-by: Eric Blake <eblake@redhat.com>
Important thing for bitmap migration is to select destination block
node to obtain the migrated bitmap.
Prepatch, on source we use bdrv_get_device_or_node_name() to identify
the node, and on target we do bdrv_lookup_bs.
bdrv_get_device_or_node_name() returns blk name only for direct
children of blk. So, bitmaps of direct children of blks are migrated by
blk name and others - by node name.
Old libvirt is unprepared to bitmap migration by node-name,
node-names are mostly auto-generated. So actually only migration by blk
name works for it.
Newer libvirt will use new interface (which will be added soon) to
specify node-mapping for bitmaps migration explicitly. Still, let's
improve the current behavior a bit.
Now, consider classic libvirt migrations assisted by mirror block job:
mirror block job inserts filter, so our source is not a direct child of
blk, and bitmaps are migrated by node-names. And this just doesn't work
with auto-generated node names.
Let's fix it by using blk-name even if some implicit filters are
inserted.
Note2: we, of course, can't skip filters and use blk name to migrate
bitmaps in filtered node by blk name for this blk if these filters have
named bitmaps which should be migrated.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1652424
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200521220648.3255-4-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: comment typo fix, shorter subject line]
Signed-off-by: Eric Blake <eblake@redhat.com>
Split out handling one bs, it is needed for the following commit, which
will handle BlockBackends separately.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200521220648.3255-2-vsementsov@virtuozzo.com>
[eblake: shorter subject line]
Signed-off-by: Eric Blake <eblake@redhat.com>
When error happen in multifd_send_thread, it use error_copy to set migrate error in
multifd_send_terminate_threads(). We should call error_free after it.
Similarly, fix another two places in multifd_recv_thread/multifd_save_cleanup.
The leak stack:
Direct leak of 48 byte(s) in 1 object(s) allocated from:
#0 0x7f781af07cf0 in calloc (/lib64/libasan.so.5+0xefcf0)
#1 0x7f781a2ce22d in g_malloc0 (/lib64/libglib-2.0.so.0+0x5322d)
#2 0x55ee1d075c17 in error_setv /mnt/sdb/backup/qemu/util/error.c:61
#3 0x55ee1d076464 in error_setg_errno_internal /mnt/sdb/backup/qemu/util/error.c:109
#4 0x55ee1cef066e in qio_channel_socket_writev /mnt/sdb/backup/qemu/io/channel-socket.c:569
#5 0x55ee1cee806b in qio_channel_writev /mnt/sdb/backup/qemu/io/channel.c:207
#6 0x55ee1cee806b in qio_channel_writev_all /mnt/sdb/backup/qemu/io/channel.c:171
#7 0x55ee1cee8248 in qio_channel_write_all /mnt/sdb/backup/qemu/io/channel.c:257
#8 0x55ee1ca12c9a in multifd_send_thread /mnt/sdb/backup/qemu/migration/multifd.c:657
#9 0x55ee1d0607fc in qemu_thread_start /mnt/sdb/backup/qemu/util/qemu-thread-posix.c:519
#10 0x7f78159ae2dd in start_thread (/lib64/libpthread.so.0+0x82dd)
#11 0x7f78156df4b2 in __GI___clone (/lib64/libc.so.6+0xfc4b2)
Indirect leak of 52 byte(s) in 1 object(s) allocated from:
#0 0x7f781af07f28 in __interceptor_realloc (/lib64/libasan.so.5+0xeff28)
#1 0x7f78156f07d9 in __GI___vasprintf_chk (/lib64/libc.so.6+0x10d7d9)
#2 0x7f781a30ea6c in g_vasprintf (/lib64/libglib-2.0.so.0+0x93a6c)
#3 0x7f781a2e7cd0 in g_strdup_vprintf (/lib64/libglib-2.0.so.0+0x6ccd0)
#4 0x7f781a2e7d8c in g_strdup_printf (/lib64/libglib-2.0.so.0+0x6cd8c)
#5 0x55ee1d075c86 in error_setv /mnt/sdb/backup/qemu/util/error.c:65
#6 0x55ee1d076464 in error_setg_errno_internal /mnt/sdb/backup/qemu/util/error.c:109
#7 0x55ee1cef066e in qio_channel_socket_writev /mnt/sdb/backup/qemu/io/channel-socket.c:569
#8 0x55ee1cee806b in qio_channel_writev /mnt/sdb/backup/qemu/io/channel.c:207
#9 0x55ee1cee806b in qio_channel_writev_all /mnt/sdb/backup/qemu/io/channel.c:171
#10 0x55ee1cee8248 in qio_channel_write_all /mnt/sdb/backup/qemu/io/channel.c:257
#11 0x55ee1ca12c9a in multifd_send_thread /mnt/sdb/backup/qemu/migration/multifd.c:657
#12 0x55ee1d0607fc in qemu_thread_start /mnt/sdb/backup/qemu/util/qemu-thread-posix.c:519
#13 0x7f78159ae2dd in start_thread (/lib64/libpthread.so.0+0x82dd)
#14 0x7f78156df4b2 in __GI___clone (/lib64/libc.so.6+0xfc4b2)
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Pan Nengyuan <pannengyuan@huawei.com>
Message-Id: <20200506095416.26099-3-pannengyuan@huawei.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
When error happen in multifd_new_send_channel_async, 'sioc' will not be used
to create the multifd_send_thread. Let's free it to avoid a memleak. And also
do error_free after migrate_set_error() to avoid another leak in the same place.
The leak stack:
Direct leak of 2880 byte(s) in 8 object(s) allocated from:
#0 0x7f20b5118ae8 in __interceptor_malloc (/lib64/libasan.so.5+0xefae8)
#1 0x7f20b44df1d5 in g_malloc (/lib64/libglib-2.0.so.0+0x531d5)
#2 0x564133bce18b in object_new_with_type /mnt/sdb/backup/qemu/qom/object.c:683
#3 0x564133eea950 in qio_channel_socket_new /mnt/sdb/backup/qemu/io/channel-socket.c:56
#4 0x5641339cfe4f in socket_send_channel_create /mnt/sdb/backup/qemu/migration/socket.c:37
#5 0x564133a10328 in multifd_save_setup /mnt/sdb/backup/qemu/migration/multifd.c:772
#6 0x5641339cebed in migrate_fd_connect /mnt/sdb/backup/qemu/migration/migration.c:3530
#7 0x5641339d15e4 in migration_channel_connect /mnt/sdb/backup/qemu/migration/channel.c:92
#8 0x5641339cf5b7 in socket_outgoing_migration /mnt/sdb/backup/qemu/migration/socket.c:108
Direct leak of 384 byte(s) in 8 object(s) allocated from:
#0 0x7f20b5118cf0 in calloc (/lib64/libasan.so.5+0xefcf0)
#1 0x7f20b44df22d in g_malloc0 (/lib64/libglib-2.0.so.0+0x5322d)
#2 0x56413406fc17 in error_setv /mnt/sdb/backup/qemu/util/error.c:61
#3 0x564134070464 in error_setg_errno_internal /mnt/sdb/backup/qemu/util/error.c:109
#4 0x5641340851be in inet_connect_addr /mnt/sdb/backup/qemu/util/qemu-sockets.c:379
#5 0x5641340851be in inet_connect_saddr /mnt/sdb/backup/qemu/util/qemu-sockets.c:458
#6 0x5641340870ab in socket_connect /mnt/sdb/backup/qemu/util/qemu-sockets.c:1105
#7 0x564133eeaabf in qio_channel_socket_connect_sync /mnt/sdb/backup/qemu/io/channel-socket.c:145
#8 0x564133eeabf5 in qio_channel_socket_connect_worker /mnt/sdb/backup/qemu/io/channel-socket.c:168
Indirect leak of 360 byte(s) in 8 object(s) allocated from:
#0 0x7f20b5118ae8 in __interceptor_malloc (/lib64/libasan.so.5+0xefae8)
#1 0x7f20af901817 in __GI___vasprintf_chk (/lib64/libc.so.6+0x10d817)
#2 0x7f20b451fa6c in g_vasprintf (/lib64/libglib-2.0.so.0+0x93a6c)
#3 0x7f20b44f8cd0 in g_strdup_vprintf (/lib64/libglib-2.0.so.0+0x6ccd0)
#4 0x7f20b44f8d8c in g_strdup_printf (/lib64/libglib-2.0.so.0+0x6cd8c)
#5 0x56413406fc86 in error_setv /mnt/sdb/backup/qemu/util/error.c:65
#6 0x564134070464 in error_setg_errno_internal /mnt/sdb/backup/qemu/util/error.c:109
#7 0x5641340851be in inet_connect_addr /mnt/sdb/backup/qemu/util/qemu-sockets.c:379
#8 0x5641340851be in inet_connect_saddr /mnt/sdb/backup/qemu/util/qemu-sockets.c:458
#9 0x5641340870ab in socket_connect /mnt/sdb/backup/qemu/util/qemu-sockets.c:1105
#10 0x564133eeaabf in qio_channel_socket_connect_sync /mnt/sdb/backup/qemu/io/channel-socket.c:145
#11 0x564133eeabf5 in qio_channel_socket_connect_worker /mnt/sdb/backup/qemu/io/channel-socket.c:168
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Pan Nengyuan <pannengyuan@huawei.com>
Message-Id: <20200506095416.26099-2-pannengyuan@huawei.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Users may need to check the xbzrle encoding rate to know if the guest
memory is xbzrle encoding-friendly, and dynamically turn off the
encoding if the encoding rate is low.
Signed-off-by: Yi Sun <yi.y.sun@intel.com>
Signed-off-by: Wei Wang <wei.w.wang@intel.com>
Message-Id: <1588208375-19556-1-git-send-email-wei.w.wang@intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
'rdma->host' is malloced in qemu_rdma_data_init, but forgot to free on the error
path in rdma_start_incoming_migration(), this patch fix that.
The leak stack:
Direct leak of 2 byte(s) in 1 object(s) allocated from:
#0 0x7fb7add18ae8 in __interceptor_malloc (/lib64/libasan.so.5+0xefae8)
#1 0x7fb7ad0df1d5 in g_malloc (/lib64/libglib-2.0.so.0+0x531d5)
#2 0x7fb7ad0f8b32 in g_strdup (/lib64/libglib-2.0.so.0+0x6cb32)
#3 0x55a0464a0f6f in qemu_rdma_data_init /mnt/sdb/qemu/migration/rdma.c:2647
#4 0x55a0464b0e76 in rdma_start_incoming_migration /mnt/sdb/qemu/migration/rdma.c:4020
#5 0x55a0463f898a in qemu_start_incoming_migration /mnt/sdb/qemu/migration/migration.c:365
#6 0x55a0458c75d3 in qemu_init /mnt/sdb/qemu/softmmu/vl.c:4438
#7 0x55a046a3d811 in main /mnt/sdb/qemu/softmmu/main.c:48
#8 0x7fb7a8417872 in __libc_start_main (/lib64/libc.so.6+0x23872)
#9 0x55a04536b26d in _start (/mnt/sdb/qemu/build/x86_64-softmmu/qemu-system-x86_64+0x286926d)
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Pan Nengyuan <pannengyuan@huawei.com>
Message-Id: <20200420102727.17339-1-pannengyuan@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Let's consolidate resetting the variables.
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: Juan Quintela <quintela@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20200421085300.7734-10-david@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Fixup for context conflicts with 91ba442
At the tail stage of throttling, the Guest is very sensitive to
CPU percentage while the @cpu-throttle-increment is excessive
usually at tail stage.
If this parameter is true, we will compute the ideal CPU percentage
used by the Guest, which may exactly make the dirty rate match the
dirty rate threshold. Then we will choose a smaller throttle increment
between the one specified by @cpu-throttle-increment and the one
generated by ideal CPU percentage.
Therefore, it is compatible to traditional throttling, meanwhile
the throttle increment won't be excessive at tail stage. This may
make migration time longer, and is disabled by default.
Signed-off-by: Keqian Zhu <zhukeqian1@huawei.com>
Message-Id: <20200413101508.54793-1-zhukeqian1@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <474bb6cf67defb8be9de5035c11aee57a680557a.1585641083.git.maozhongyi@cmss.chinamobile.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
use QERR_INVALID_PARAMETER_VALUE instead of
"Parameter '%s' expects" for consistency.
Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com>
Message-Id: <4ce71da4a5f98ad6ead0806ec71043473dcb4c07.1585641083.git.maozhongyi@cmss.chinamobile.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
bad indentation conflicts with CODING_STYLE doc.
Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com>
Message-Id: <09f7529c665cac0c6a5e032ac6fdb6ca701f7e37.1585329482.git.maozhongyi@cmss.chinamobile.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Silent static analyzer warning
Remove dead assignments
Support -chardev serial on macOS
Update MAINTAINERS
Some cosmetic changes
-----BEGIN PGP SIGNATURE-----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=ibgH
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/vivier2/tags/trivial-branch-for-5.1-pull-request' into staging
trivial patches (20200504)
Silent static analyzer warning
Remove dead assignments
Support -chardev serial on macOS
Update MAINTAINERS
Some cosmetic changes
# gpg: Signature made Mon 04 May 2020 16:45:18 BST
# gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C
# gpg: issuer "laurent@vivier.eu"
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full]
# gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full]
# gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full]
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C
* remotes/vivier2/tags/trivial-branch-for-5.1-pull-request:
hw/timer/pxa2xx_timer: Add assertion to silent static analyzer warning
hw/timer/stm32f2xx_timer: Remove dead assignment
hw/gpio/aspeed_gpio: Remove dead assignment
hw/isa/i82378: Remove dead assignment
hw/ide/sii3112: Remove dead assignment
hw/input/adb-kbd: Remove dead assignment
hw/i2c/pm_smbus: Remove dead assignment
blockdev: Remove dead assignment
block: Avoid dead assignment
Compress lines for immediate return
chardev: Add macOS to list of OSes that support -chardev serial
MAINTAINERS: Update Keith Busch's email address
elf_ops: Don't try to g_mapped_file_unref(NULL)
hw/mem/pc-dimm: Fix line over 80 characters warning
hw/mem/pc-dimm: Print slot number on error at pc_dimm_pre_plug()
MAINTAINERS: Mark the LatticeMico32 target as orphan
timer/exynos4210_mct: Remove redundant statement in exynos4210_mct_write()
display/blizzard: use extract16() for fix clang analyzer warning in blizzard_draw_line16_32()
scsi/esp-pci: add g_assert() for fix clang analyzer warning in esp_pci_io_write()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- ran regexp "qemu_mutex_lock\(.*\).*\n.*if" to find targets
- replaced result with QEMU_LOCK_GUARD if all unlocks at function end
- replaced result with WITH_QEMU_LOCK_GUARD if unlock not at end
Signed-off-by: Daniel Brodsky <dnbrdsky@gmail.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-id: 20200404042108.389635-3-dnbrdsky@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Compress two lines into a single line if immediate return statement is found.
It also remove variables progress, val, data, ret and sock
as they are no longer needed.
Remove space between function "mixer_load" and '(' to fix the
checkpatch.pl error:-
ERROR: space prohibited between function name and open parenthesis '('
Done using following coccinelle script:
@@
local idexpression ret;
expression e;
@@
-ret =
+return
e;
-return ret;
Signed-off-by: Simran Singhal <singhalsimran0@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20200401165314.GA3213@simran-Inspiron-5558>
[lv: in handle_aiocb_write_zeroes_unmap() move "int ret" inside the #ifdef]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The Error ** argument must be NULL, &error_abort, &error_fatal, or a
pointer to a variable containing NULL. Passing an argument of the
latter kind twice without clearing it in between is wrong: if the
first call sets an error, it no longer points to NULL for the second
call.
qmp_xen_colo_do_checkpoint() passes @errp first to
replication_do_checkpoint_all(), and then to
colo_notify_filters_event(). If both fail, this will trip the
assertion in error_setv().
Similar code in secondary_vm_do_failover() calls
colo_notify_filters_event() only after replication_do_checkpoint_all()
succeeded. Do the same here.
Fixes: 0e8818f023
Cc: Zhang Chen <chen.zhang@intel.com>
Cc: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Zhang Chen <chen.zhang@intel.com>
Message-Id: <20200422130719.28225-12-armbru@redhat.com>
run:
(qemu) info migrate_parameters
announce-initial: 50 ms
...
announce-max: 550 ms
multifd-compression: none
xbzrle-cache-size: 4194304
max-postcopy-bandwidth: 0
tls-authz: '(null)'
Migration parameter 'tls-authz' is used to provide the QOM ID
of a QAuthZ subclass instance that provides the access control
check, default is NULL. But the empty string is not a valid
object ID, so use "" instead of the default. Although it will
fail when lookup an object with ID "", it is harmless, just
consistent with tls_creds.
As a bonus, this patch also fixed the bad indentation on the
last line and removed 'has_tls_authz' redundant check in
'hmp_info_migrate_parameters'.
Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com>
Message-Id: <119f539a9f4d198bc3bcced46b8280520d60bc51.1585100802.git.maozhongyi@cmss.chinamobile.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
local_err is used again in migration_bitmap_sync_precopy() after
precopy_notify(), so we must zero it. Otherwise try to set
non-NULL local_err will crash.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200324153630.11882-6-vsementsov@virtuozzo.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
local_err is used again in secondary_vm_do_failover() after
replication_stop_all(), so we must zero it. Otherwise try to set
non-NULL local_err will crash.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200324153630.11882-5-vsementsov@virtuozzo.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Add new parameter description, also:
1. Remove unsociable space.
2. Nit picking: s/two/2 in report
Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com>
Message-Id: <20200320143216.423374-1-maozhongyi@cmss.chinamobile.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
We will migrate parts of dirty pages backgroud lively during the gap time
of two checkpoints, without this modification, it will not work
because ram_save_iterate() will check it before send RAM_SAVE_FLAG_EOS
at the end of it.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Message-Id: <20200224065414.36524-7-zhang.zhanghailiang@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
It is only need to record bitmap of dirty pages while goes
into COLO stage.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Message-Id: <20200224065414.36524-6-zhang.zhanghailiang@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This patch will reduce the downtime of VM for the initial process,
Previously, we copied all these memory in preparing stage of COLO
while we need to stop VM, which is a time-consuming process.
Here we optimize it by a trick, back-up every page while in migration
process while COLO is enabled, though it affects the speed of the
migration, but it obviously reduce the downtime of back-up all SVM'S
memory in COLO preparing stage.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Message-Id: <20200224065414.36524-5-zhang.zhanghailiang@huawei.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
minor typo fixes
Currently, if the bytes_dirty_period is more than the 50% of
bytes_xfer_period, we start or increase throttling.
If we make this percentage higher, then we can tolerate higher
dirty rate during migration, which means less impact on guest.
The side effect of higher percentage is longer migration time.
We can make this parameter configurable to switch between mig-
ration time first or guest performance first.
The default value is 50 and valid range is 1 to 100.
Signed-off-by: Keqian Zhu <zhukeqian1@huawei.com>
Message-Id: <20200224023142.39360-1-zhukeqian1@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This helper has been called twice which is wrong.
Left the one where called while get COLO enable message
from source side.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Split checkpoint incoming process into a helper.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
This commit "migration: Create migration_is_running()" broke
COLO. Becuase there is a process broken by this commit.
colo_process_checkpoint
->colo_do_checkpoint_transaction
->migrate_set_block_enabled
->qmp_migrate_set_capabilities
It can be fixed by make COLO process as an exception,
Maybe we need a better way to fix it.
Cc: Juan Quintela <quintela@redhat.com>
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Both <linux/fs.h> and <sys/mount.h> define BLOCK_SIZE macros. Avoiding
using that name in block/migration.c.
I noticed this when including <liburing.h> (Linux io_uring) from
"block/aio.h" and compilation failed. Although patches adding that
include haven't been sent yet, it makes sense to rename the macro now in
case someone else stumbles on it in the meantime.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
'list' forgot to free at the end of dump_vmstate_json_to_file(), although it's called only once, but seems like a clean code.
Fix the leak as follow:
Direct leak of 16 byte(s) in 1 object(s) allocated from:
#0 0x7fb946abd768 in __interceptor_malloc (/lib64/libasan.so.5+0xef768)
#1 0x7fb945eca445 in g_malloc (/lib64/libglib-2.0.so.0+0x52445)
#2 0x7fb945ee2066 in g_slice_alloc (/lib64/libglib-2.0.so.0+0x6a066)
#3 0x7fb945ee3139 in g_slist_prepend (/lib64/libglib-2.0.so.0+0x6b139)
#4 0x5585db591581 in object_class_get_list_tramp /mnt/sdb/qemu-new/qemu/qom/object.c:1084
#5 0x5585db590f66 in object_class_foreach_tramp /mnt/sdb/qemu-new/qemu/qom/object.c:1028
#6 0x7fb945eb35f7 in g_hash_table_foreach (/lib64/libglib-2.0.so.0+0x3b5f7)
#7 0x5585db59110c in object_class_foreach /mnt/sdb/qemu-new/qemu/qom/object.c:1038
#8 0x5585db5916b6 in object_class_get_list /mnt/sdb/qemu-new/qemu/qom/object.c:1092
#9 0x5585db335ca0 in dump_vmstate_json_to_file /mnt/sdb/qemu-new/qemu/migration/savevm.c:638
#10 0x5585daa5bcbf in main /mnt/sdb/qemu-new/qemu/vl.c:4420
#11 0x7fb941204812 in __libc_start_main ../csu/libc-start.c:308
#12 0x5585da29420d in _start (/mnt/sdb/qemu-new/qemu/build/x86_64-softmmu/qemu-system-x86_64+0x27f020d)
Indirect leak of 7472 byte(s) in 467 object(s) allocated from:
#0 0x7fb946abd768 in __interceptor_malloc (/lib64/libasan.so.5+0xef768)
#1 0x7fb945eca445 in g_malloc (/lib64/libglib-2.0.so.0+0x52445)
#2 0x7fb945ee2066 in g_slice_alloc (/lib64/libglib-2.0.so.0+0x6a066)
#3 0x7fb945ee3139 in g_slist_prepend (/lib64/libglib-2.0.so.0+0x6b139)
#4 0x5585db591581 in object_class_get_list_tramp /mnt/sdb/qemu-new/qemu/qom/object.c:1084
#5 0x5585db590f66 in object_class_foreach_tramp /mnt/sdb/qemu-new/qemu/qom/object.c:1028
#6 0x7fb945eb35f7 in g_hash_table_foreach (/lib64/libglib-2.0.so.0+0x3b5f7)
#7 0x5585db59110c in object_class_foreach /mnt/sdb/qemu-new/qemu/qom/object.c:1038
#8 0x5585db5916b6 in object_class_get_list /mnt/sdb/qemu-new/qemu/qom/object.c:1092
#9 0x5585db335ca0 in dump_vmstate_json_to_file /mnt/sdb/qemu-new/qemu/migration/savevm.c:638
#10 0x5585daa5bcbf in main /mnt/sdb/qemu-new/qemu/vl.c:4420
#11 0x7fb941204812 in __libc_start_main ../csu/libc-start.c:308
#12 0x5585da29420d in _start (/mnt/sdb/qemu-new/qemu/build/x86_64-softmmu/qemu-system-x86_64+0x27f020d)
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Pan Nengyuan <pannengyuan@huawei.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The "ret" has been assigned in all branches. It didn't need to be
assigned separately.
Clang static code analyzer show warning:
migration/vmstate.c:365:17: warning: Value stored to 'ret' is never read
ret = 0;
^ ~
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Chen Qun <kuhn.chenqun@huawei.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This parameter specifies the zstd compression level. The next patch
will put it to use.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This parameter specifies the zlib compression level. The next patch
will put it to use.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
It will be used later.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
---
No comp value needs to be zero.
This will store the compression method to use. We start with none.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
---
Rename multifd-method to multifd-compression
rdma_accept_incoming_migration is called from an fd handler and
can't return an Error * anywhere.
Currently it's leaking Error's in errp/local_err - there's
no point putting them in there unless we can report them.
Turn most into fprintf's, and the last into an error_reportf_err
where it's coming up from another function.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
qemu_savevm_nr_failover_devices() is originally designed to
get the number of failover devices, but it actually returns
the number of "unplug-pending" failover devices now. Moreover,
what drives migration state to wait-unplug should be the number
of "unplug-pending" failover devices, not all failover devices.
We can also notice that qemu_savevm_state_guest_unplug_pending()
and qemu_savevm_nr_failover_devices() is equivalent almost (from
the code view). So the latter is incorrect semantically and
useless, just delete it.
In the qemu_savevm_state_guest_unplug_pending(), once hit a
unplug-pending failover device, then it can return true right
now to save cpu time.
Signed-off-by: Keqian Zhu <zhukeqian1@huawei.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Tested-by: Jens Freimann <jfreimann@redhat.com>
Reviewed-by: Jens Freimann <jfreimann@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
If the migration is cancelled when it is in the completion phase,
the migration state is set to MIGRATION_STATUS_CANCELLING.
The VM maybe wait for the 'pause_sem' semaphore in migration_maybe_pause
function, so that VM always is paused.
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Zhimin Feng <fengzhimin1@huawei.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
We open a file with empty_ops for compress QEMUFile, which means this is
not writable.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Instead of inserting read elements at the head and
then reversing the list, it is simpler to add
each element after the previous one. Introduce
QLIST_RAW_INSERT_AFTER helper and use it in
get_qlist().
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Suggested-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
We need to change the full chain to pass the Error parameter.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
If the multifd_send_threads is not created when migration is failed,
multifd_save_cleanup would be called twice. In this senario, the
multifd_send_state is accessed after it has been released, the result
is that the source VM is crashing down.
Here is the coredump stack:
Program received signal SIGSEGV, Segmentation fault.
0x00005629333a78ef in multifd_send_terminate_threads (err=err@entry=0x0) at migration/ram.c:1012
1012 MultiFDSendParams *p = &multifd_send_state->params[i];
#0 0x00005629333a78ef in multifd_send_terminate_threads (err=err@entry=0x0) at migration/ram.c:1012
#1 0x00005629333ab8a9 in multifd_save_cleanup () at migration/ram.c:1028
#2 0x00005629333abaea in multifd_new_send_channel_async (task=0x562935450e70, opaque=<optimized out>) at migration/ram.c:1202
#3 0x000056293373a562 in qio_task_complete (task=task@entry=0x562935450e70) at io/task.c:196
#4 0x000056293373a6e0 in qio_task_thread_result (opaque=0x562935450e70) at io/task.c:111
#5 0x00007f475d4d75a7 in g_idle_dispatch () from /usr/lib64/libglib-2.0.so.0
#6 0x00007f475d4da9a9 in g_main_context_dispatch () from /usr/lib64/libglib-2.0.so.0
#7 0x0000562933785b33 in glib_pollfds_poll () at util/main-loop.c:219
#8 os_host_main_loop_wait (timeout=<optimized out>) at util/main-loop.c:242
#9 main_loop_wait (nonblocking=nonblocking@entry=0) at util/main-loop.c:518
#10 0x00005629334c5acf in main_loop () at vl.c:1810
#11 0x000056293334d7bb in main (argc=<optimized out>, argv=<optimized out>, envp=<optimized out>) at vl.c:4471
If the multifd_send_threads is not created when migration is failed.
In this senario, we don't call multifd_save_cleanup in multifd_new_send_channel_async.
Signed-off-by: Zhimin Feng <fengzhimin1@huawei.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
This function returns true if we are in the middle of a migration.
It is like migration_is_setup_or_active() with CANCELLING and COLO.
Adapt all callers that are needed.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
If we do a cancel, we got out without one error, but we can't do the
rest of the output as in a normal situation.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Be sure that we are not doing neither read/write after shutdown of the
QEMUFile.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
We transmit ram_addr_t always as uint64_t. Be consistent in its
use (on 64bit system, it is always uint64_t problem is 32bits).
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Support QLIST migration using the same principle as QTAILQ:
94869d5c52 ("migration: migrate QTAILQ").
The VMSTATE_QLIST_V macro has the same proto as VMSTATE_QTAILQ_V.
The change mainly resides in QLIST RAW macros: QLIST_RAW_INSERT_HEAD
and QLIST_RAW_REVERSE.
Tests also are provided.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
It was always used as 32bit, so define it as used to be clear.
Instead of using -1 as the auto-gen magic value, we switch to
UINT32_MAX. We also make sure that we don't auto-gen this value to
avoid overflowed instance IDs without being noticed.
Suggested-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Define the new macro VMSTATE_INSTANCE_ID_ANY for callers who wants to
auto-generate the vmstate instance ID. Previously it was hard coded
as -1 instead of this macro. It helps to change this default value in
the follow up patches. No functional change.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Added type conversions to ram_addr_t before all left shifts of page
indexes to TARGET_PAGE_BITS, to correct overflows when the page
address was 4Gb and more.
Signed-off-by: Alexey Romko <nevilad@yahoo.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
One multifd will lock all the other multifds' IOChannel mutex to inform them
to quit by setting p->quit or shutting down p->c. In this senario, if some
multifds had already been terminated and multifd_load_cleanup/multifd_save_cleanup
had destroyed their mutex, it could cause destroyed mutex access when trying
lock their mutex.
Here is the coredump stack:
#0 0x00007f81a2794437 in raise () from /usr/lib64/libc.so.6
#1 0x00007f81a2795b28 in abort () from /usr/lib64/libc.so.6
#2 0x00007f81a278d1b6 in __assert_fail_base () from /usr/lib64/libc.so.6
#3 0x00007f81a278d262 in __assert_fail () from /usr/lib64/libc.so.6
#4 0x000055eb1bfadbd3 in qemu_mutex_lock_impl (mutex=0x55eb1e2d1988, file=<optimized out>, line=<optimized out>) at util/qemu-thread-posix.c:64
#5 0x000055eb1bb4564a in multifd_send_terminate_threads (err=<optimized out>) at migration/ram.c:1015
#6 0x000055eb1bb4bb7f in multifd_send_thread (opaque=0x55eb1e2d19f8) at migration/ram.c:1171
#7 0x000055eb1bfad628 in qemu_thread_start (args=0x55eb1e170450) at util/qemu-thread-posix.c:502
#8 0x00007f81a2b36df5 in start_thread () from /usr/lib64/libpthread.so.0
#9 0x00007f81a286048d in clone () from /usr/lib64/libc.so.6
To fix it up, let's destroy the mutex after all the other multifd threads had
been terminated.
Signed-off-by: Jiahui Cen <cenjiahui@huawei.com>
Signed-off-by: Ying Fang <fangying1@huawei.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
One multifd channel will shutdown all the other multifd's IOChannel when it
fails to receive an IOChannel. In this senario, if some multifds had not
received its IOChannel yet, it would try to shutdown its IOChannel which could
cause nullptr access at qio_channel_shutdown.
Here is the coredump stack:
#0 object_get_class (obj=obj@entry=0x0) at qom/object.c:908
#1 0x00005563fdbb8f4a in qio_channel_shutdown (ioc=0x0, how=QIO_CHANNEL_SHUTDOWN_BOTH, errp=0x0) at io/channel.c:355
#2 0x00005563fd7b4c5f in multifd_recv_terminate_threads (err=<optimized out>) at migration/ram.c:1280
#3 0x00005563fd7bc019 in multifd_recv_new_channel (ioc=ioc@entry=0x556400255610, errp=errp@entry=0x7ffec07dce00) at migration/ram.c:1478
#4 0x00005563fda82177 in migration_ioc_process_incoming (ioc=ioc@entry=0x556400255610, errp=errp@entry=0x7ffec07dce30) at migration/migration.c:605
#5 0x00005563fda8567d in migration_channel_process_incoming (ioc=0x556400255610) at migration/channel.c:44
#6 0x00005563fda83ee0 in socket_accept_incoming_migration (listener=0x5563fff6b920, cioc=0x556400255610, opaque=<optimized out>) at migration/socket.c:166
#7 0x00005563fdbc25cd in qio_net_listener_channel_func (ioc=<optimized out>, condition=<optimized out>, opaque=<optimized out>) at io/net-listener.c:54
#8 0x00007f895b6fe9a9 in g_main_context_dispatch () from /usr/lib64/libglib-2.0.so.0
#9 0x00005563fdc18136 in glib_pollfds_poll () at util/main-loop.c:218
#10 0x00005563fdc181b5 in os_host_main_loop_wait (timeout=1000000000) at util/main-loop.c:241
#11 0x00005563fdc183a2 in main_loop_wait (nonblocking=nonblocking@entry=0) at util/main-loop.c:517
#12 0x00005563fd8edb37 in main_loop () at vl.c:1791
#13 0x00005563fd74fd45 in main (argc=<optimized out>, argv=<optimized out>, envp=<optimized out>) at vl.c:4473
To fix it up, let's check p->c before calling qio_channel_shutdown.
Signed-off-by: Jiahui Cen <cenjiahui@huawei.com>
Signed-off-by: Ying Fang <fangying1@huawei.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
We don't support multifd during postcopy, but user still could enable
both multifd and postcopy. This leads to migration failure.
Skip multifd during postcopy.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
This is a preparation for the next patch:
not use multifd during postcopy.
Without enabling postcopy, everything looks good. While after enabling
postcopy, migration may fail even not use multifd during postcopy. The
reason is the pages is not properly cleared and *old* target page will
continue to be transferred.
After clean pages, migration succeeds.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
postcopy requires to place a whole host page, while migration thread
migrate memory in target page size. This makes postcopy need to collect
all target pages in one host page before placing via userfaultfd.
To enable compress during postcopy, there are two problems to solve:
1. Random order for target page arrival
2. Target pages in one host page arrives without interrupt by target
page from other host page
The first one is handled by previous cleanup patch.
This patch handles the second one by:
1. Flush compress thread for each host page
2. Wait for decompress thread for before placing host page
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
After using number of target page received to track one host page, we
could have the capability to handle random order target page arrival in
one host page.
This is a preparation for enabling compress during postcopy.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
For the first target page, all_zero is set to true for this round check.
After target_pages introduced, we could leverage this variable instead
of checking the address offset.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
In postcopy, it requires to place whole host page instead of target
page.
Currently, it relies on the page offset to decide whether this is the
last target page. We also can count the target page number during the
iteration. When the number of target page equals
(host page size / target page size), this means it is the last target
page in the host page.
This is a preparation for non-ordered target page transmission.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Compress is not supported with postcopy, it is safe to wait for
decompress thread just in precopy.
This is a preparation for later patch.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
In this case, page_buffer content would not be used.
Skip this to save some time.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Usually, incoming migration coroutine yields to the main loop
while its IO-channel is waiting for data to receive. But there is a case
when RAM migration and data receive have the same speed: VM with huge
zeroed RAM. In this case, IO-channel won't read and thus the main loop
is stuck and for instance, it doesn't respond to QMP commands.
For this case, yield periodically, but not too often, so as not to
affect the speed of migration.
Signed-off-by: Yury Kotov <yury-kotov@yandex-team.ru>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
savevm_state's SaveStateEntry TAILQ is a priority queue. Priority
sorting is maintained by searching from head to tail for a suitable
insertion spot. Insertion is thus an O(n) operation.
If we instead keep track of the head of each priority's subqueue
within that larger queue we can reduce this operation to O(1) time.
savevm_state_handler_remove() becomes slightly more complex to
accomodate these gains: we need to replace the head of a priority's
subqueue when removing it.
With O(1) insertion, booting VMs with many SaveStateEntry objects is
more plausible. For example, a ppc64 VM with maxmem=8T has 40000 such
objects to insert.
Signed-off-by: Scott Cheloha <cheloha@linux.vnet.ibm.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Create a function to abstract common logic needed when removing a
SaveStateEntry element from the savevm_state.handlers queue.
For now we just remove the element. Soon it will involve additional
cleanup.
Signed-off-by: Scott Cheloha <cheloha@linux.vnet.ibm.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The current check sets an error but doesn't fail the command.
This may cause a problem if new connection attempt by the same URI
affects the first connection.
Signed-off-by: Yury Kotov <yury-kotov@yandex-team.ru>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Clang does not like qmp_migrate_set_downtime()'s code to clamp double
@value to 0..INT64_MAX:
qemu/migration/migration.c:2038:24: error: implicit conversion from 'long' to 'double' changes value from 9223372036854775807 to 9223372036854775808 [-Werror,-Wimplicit-int-float-conversion]
The warning will be enabled by default in clang 10. It is not
available for clang <= 9.
The clamp is actually useless; @value is checked to be within
0..MAX_MIGRATE_DOWNTIME_SECONDS immediately before. Delete it.
While there, make the conversion from double to int64_t explicit.
Signed-off-by: Fangrui Song <i@maskray.me>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
[Patch split, commit message improved]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
When using hugepages, rate limiting is necessary within each huge
page, since a 1G huge page can take a significant time to send, so
you end up with bursty behaviour.
Fixes: 4c011c37ec ("postcopy: Send whole huge pages")
Reported-by: Lin Ma <LMa@suse.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
ram_save_queue_pages() has an 'err' label that can be replaced by
'return -1' instead.
Same thing with ram_discard_range(), and in this case we can also
get rid of the 'ret' variable and return either '-1' on error
or the result of ram_block_discard_range().
CC: Juan Quintela <quintela@redhat.com>
CC: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
If we are exiting due to an error/finish/.... Just don't try to even
touch the channel with one IO operation.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Fill everything with zero, so the padding fields are also initialized.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Replace DeviceState dependency with VMStateIf on vmstate API.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Acked-by: Halil Pasic <pasic@linux.ibm.com>
Use WITH_RCU_READ_LOCK_GUARD to avoid exiting colo_init_ram_cache
without releasing RCU.
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
../migration/ram.c: In function ‘multifd_recv_thread’:
/home/elmarco/src/qq/include/qapi/error.h:165:5: error: ‘block’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
165 | error_setg_internal((errp), __FILE__, __LINE__, __func__, \
| ^~~~~~~~~~~~~~~~~~~
../migration/ram.c:818:15: note: ‘block’ was declared here
818 | RAMBlock *block;
| ^~~~~
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Switch to ram block writeback for pmem migration.
Signed-off-by: Beata Michalska <beata.michalska@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-id: 20191121000843.24844-4-beata.michalska@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
.dev_unplug_pending is set up by virtio-net code indepent of failover
support was set for the device or not. This gives a wrong result when
we check for existing primary devices in migration code.
Fix this by actually calling dev_unplug_pending() instead of just
checking if the function pointer was set. When the feature was not
negotiated dev_unplug_pending() will always return false. This prevents
us from going into the wait-unplug state when there's no primary device
present.
Fixes: 9711cd0dfc ("net/virtio: add failover support")
Signed-off-by: Jens Freimann <jfreimann@redhat.com>
Reported-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This patch adds a new migration state called wait-unplug. It is entered
after the SETUP state if failover devices are present. It will transition
into ACTIVE once all devices were succesfully unplugged from the guest.
So if a guest doesn't respond or takes long to honor the unplug request
the user will see the migration state 'wait-unplug'.
In the migration thread we query failover devices if they're are still
pending the guest unplug. When all are unplugged the migration
continues. If one device won't unplug migration will stay in wait_unplug
state.
Signed-off-by: Jens Freimann <jfreimann@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20191029114905.6856-9-jfreimann@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
There are three page size in qemu:
real host page size
host page size
target page size
All of them have dedicate variable to represent. For the last two, we
use the same form in the whole qemu project, while for the first one we
use two forms: qemu_real_host_page_size and getpagesize().
qemu_real_host_page_size is defined to be a replacement of
getpagesize(), so let it serve the role.
[Note] Not fully tested for some arch or device.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20191013021145.16011-3-richardw.yang@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
bdrv_dirty_bitmap_next is always used in same pattern. So, split it
into _next and _first, instead of combining two functions into one and
add FOR_EACH_DIRTY_BITMAP macro.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20190916141911.5255-5-vsementsov@virtuozzo.com
Signed-off-by: John Snow <jsnow@redhat.com>
Add bs field to BdrvDirtyBitmap structure. Drop BlockDriverState
parameter from bitmap APIs where possible.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20190916141911.5255-3-vsementsov@virtuozzo.com
[Rebased on top of block-copy. --js]
Signed-off-by: John Snow <jsnow@redhat.com>
Introduce support for GTree migration. A custom save/restore
is implemented. Each item is made of a key and a data.
If the key is a pointer to an object, 2 VMSDs are passed into
the GTree VMStateField.
When putting the items, the tree is traversed in sorted order by
g_tree_foreach.
On the get() path, gtrees must be allocated using the proper
key compare, key destroy and value destroy. This must be handled
beforehand, for example in a pre_load method.
Tests are added to test save/dump of structs containing gtrees
including the virtio-iommu domain/mappings scenario.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20191011121724.433-1-eric.auger@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
uintptr_t fixup for test on 32bit
When we found an available channel in multifd_send_pages(), its
pages->used is cleared and then attached to multifd_send_state.
It is not necessary to do this twice.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20191011085050.17622-5-richardw.yang@linux.intel.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
MultiFDPacket_t's magic and version field never changes during
migration, so move these two fields in setup stage.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20191011085050.17622-4-richardw.yang@linux.intel.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
multifd_send_fill_packet() prepares meta data for following pages to
transfer. It would be more proper to fill pages->allocated instead of
static max value, especially we want to support flexible packet size.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20191011085050.17622-3-richardw.yang@linux.intel.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20191011085050.17622-2-richardw.yang@linux.intel.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Currently, we set PostcopyState blindly to RUNNING, even we found the
previous state is not LISTENING. This will lead to a corner case.
First let's look at the code flow:
qemu_loadvm_state_main()
ret = loadvm_process_command()
loadvm_postcopy_handle_run()
return -1;
if (ret < 0) {
if (postcopy_state_get() == POSTCOPY_INCOMING_RUNNING)
...
}
>From above snippet, the corner case is loadvm_postcopy_handle_run()
always sets state to RUNNING. And then it checks the previous state. If
the previous state is not LISTENING, it will return -1. But at this
moment, PostcopyState is already been set to RUNNING.
Then ret is checked in qemu_loadvm_state_main(), when it is -1
PostcopyState is checked. Current logic would pause postcopy and retry
if PostcopyState is RUNNING. This is not what we expect, because
postcopy is not active yet.
This patch makes sure state is set to RUNNING only previous state is
LISTENING by checking the state first.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Suggested by: Peter Xu <peterx@redhat.com>
Message-Id: <20191010011316.31363-3-richardw.yang@linux.intel.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Function postcopy_ram_incoming_setup and postcopy_ram_incoming_cleanup
is a pair. Rename to make it clear for audience.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20191010011316.31363-2-richardw.yang@linux.intel.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
There are two places to call function postcopy_ram_incoming_cleanup()
postcopy_ram_listen_thread on migration success
loadvm_postcopy_handle_listen one setup failure
On success, the vm will never accept another migration. On failure,
PostcopyState is transited from LISTENING to END and would be checked in
qemu_loadvm_state_main(). If PostcopyState is RUNNING, migration would
be paused and retried.
Currently PostcopyState is set to END in function
postcopy_ram_incoming_cleanup(). With above analysis, we can take this
step out and postpone this till the end of listen thread to indicate the
listen thread is done.
This is a preparation patch for later cleanup.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20191006000249.29926-3-richardw.yang@linux.intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Fixed up in merge to the 1 parameter postcopy_state_set
If mis->have_listen_thread is true, this means current PostcopyState
must be LISTENING or RUNNING. While the check at the beginning of the
function makes sure the state transaction happens when its previous
PostcopyState is ADVISE or DISCARD.
This means we would never touch this check.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20191006000249.29926-2-richardw.yang@linux.intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This provides helpful information on which entry failed.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20191005220517.24029-5-richardw.yang@linux.intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Not necessary to do the check again.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20191005220517.24029-4-richardw.yang@linux.intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20191005220517.24029-3-richardw.yang@linux.intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
postcopy_ram_incoming_setup() and postcopy_ram_incoming_cleanup() are
counterpart. It is reasonable to map/unmap large zero page in these two
functions respectively.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20191005135021.21721-3-richardw.yang@linux.intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
During migration, a tmp page is allocated so that we could place a whole
host page during postcopy.
Currently the page is allocated during load stage, this is a little bit
late. And more important, if we failed to allocate it, the error is not
checked properly. Even it is NULL, we would still use it.
This patch moves the allocation to setup stage and if failed error
message would be printed and caller would notice it.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
In normal precopy we can't do reconnection recovery - but we also
don't need to, since you can just rerun migration.
At the moment if the 'return-path' capability is on, we use
the return path in precopy to give a positive 'OK' to the end
of migration; however if migration fails then we fall into
the postcopy recovery path and hang. This fixes it by only
running the return path in the postcopy case.
Reported-by: Greg Kurz <groug@kaod.org>
Tested-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Use the automatic read unlocker in migration/rdma.c.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20191007143642.301445-5-dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Use the automatic read unlocker in migration/ram.c
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20191007143642.301445-4-dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Use the automatic rcu_read unlocker to fix a missing unlock.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20191007143642.301445-3-dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Wrap the check into a function to make it easy to read.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20190717005341.14140-1-richardw.yang@linux.intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Various parts of the migration code do different things when they're
in postcopy mode; prior to this patch this has been 'postcopy-active'.
This patch extends 'in_postcopy' to include 'postcopy-paused' and
'postcopy-recover'.
In particular, when you set the max-postcopy-bandwidth parameter, this
only affects the current migration fd if we're 'in_postcopy';
this leads to a race in the postcopy recovery test where it increases
the speed from 4k/sec to unlimited, but that increase can get ignored
if the change is made between the point at which the reconnection
happens and it transitions back to active.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190923174942.12182-1-dgilbert@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This fixes a deadlock that can occur on the migration source after
a failed RDMA migration; as the source tries to cleanup it
clears a pair of pointers and uses synchronize_rcu to wait; this
is happening on the main thread. With the CPUs running
a CPU thread can be an rcu reader and attempt to grab the main lock
(kvm_handle_io->address_space_write->flatview_write->flatview_write_continue->
prepare_mmio_access->qemu_mutex_lock_iothread_impl)
Replace the synchronize_rcu with a call_rcu to postpone the freeing.
Fixes: 74637e6f08 ("migration: implement bi-directional RDMA QIOChannel")
( https://bugzilla.redhat.com/show_bug.cgi?id=1746787 )
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190913163507.1403-3-dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
If we've already finished the migration or something has
already gone wrong, don't moan about the migration stream disconnecting.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190913163507.1403-2-dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This is a cleanup for previous removal of unsentmap.
The sent parameter is not necessary now.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20190819061843.28642-4-richardw.yang@linux.intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Commit f3f491fcd6 ('Postcopy: Maintain unsentmap') introduced
unsentmap to track not yet sent pages.
This is not necessary since:
* unsentmap is a sub-set of bmap before postcopy start
* unsentmap is the summation of bmap and unsentmap after canonicalizing
This patch just removes it.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20190819061843.28642-3-richardw.yang@linux.intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
All pages, either partially sent or partially dirty, will be discarded in
postcopy_send_discard_bm_ram(), since we update the unsentmap to be
unsentmap = unsentmap | dirty in ram_postcopy_send_discard_bitmap().
This is not necessary to do discard when canonicalizing bitmap. And by
doing so, we separate the page discard into two individual steps:
* canonicalize bitmap
* discard page
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20190819061843.28642-2-richardw.yang@linux.intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20190912122514.22504-2-marcandre.lureau@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Replace confusing usage:
~BDRV_SECTOR_MASK
With more clear:
(BDRV_SECTOR_SIZE - 1)
Remove BDRV_SECTOR_MASK and the unused BDRV_BLOCK_OFFSET_MASK which was
it's last user.
Signed-off-by: Nir Soffer <nsoffer@redhat.com>
Message-id: 20190827185913.27427-3-nsoffer@redhat.com
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20190912024957.11780-1-richardw.yang@linux.intel.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
In add_to_iovec(), qemu_fflush() will be called if iovec is full. If
this happens, buf_index is reset. Currently, this is not checked and
buf_index would always been adjust with buf size.
This is not harmful, but will waste some space in file buffer.
This patch make add_to_iovec() return 1 when it has flushed the file.
Then the caller could check the return value to see whether it is
necessary to adjust the buf_index any more.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190911132839.23336-3-richard.weiyang@gmail.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The check of writev_buffer is in qemu_fflush, which means it is not
harmful if it is NULL.
And removing it will make the code consistent since all other
add_to_iovec() is called without the check.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190911132839.23336-2-richard.weiyang@gmail.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
We've got max-postcopy-bandwidth parameter but it's not applied
correctly after a postcopy recovery so the recovered migration stream
will still eat the whole net bandwidth. Fix that up.
Reported-by: Xiaohui Li <xiaohli@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20190906130103.20961-1-peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This capability realizes simple source validation by UUID.
It's useful for live migration between hosts.
Signed-off-by: Yury Kotov <yury-kotov@yandex-team.ru>
Message-Id: <20190903162246.18524-2-yury-kotov@yandex-team.ru>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Commit 11808bb removed the non-iovec based write support,
the comment hung on.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190823103946.7388-1-dgilbert@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Commit 78dd48df3 removed the last caller of register_savevm_live for an
instantiable device (rather than a single system wide device);
so trim out the parameter.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190822115433.12070-1-dgilbert@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
During migration, there are several places to iterate on
savevm.handlers. And on each iteration, we need to check its ops and
related callbacks before invoke it.
Generally, ops is the first element to check, and it is only necessary
to check it once.
This patch clean all the related part in savevm.c to check ops only once
in those iterations.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20190819032804.8579-1-richardw.yang@linux.intel.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
When encounter error, multifd_send_thread should always notify who pay
attention to it before exit. Otherwise it may block migration_thread
at multifd_send_sync_main forever.
Error as follow:
-------------------------------------------------------------------------------
(gdb) bt
#0 0x00007f4d669dfa0b in do_futex_wait.constprop.1 () from /lib64/libpthread.so.0
#1 0x00007f4d669dfa9f in __new_sem_wait_slow.constprop.0 () from /lib64/libpthread.so.0
#2 0x00007f4d669dfb3b in sem_wait@@GLIBC_2.2.5 () from /lib64/libpthread.so.0
#3 0x0000562ccf0a5614 in qemu_sem_wait (sem=sem@entry=0x562cd1b698e8) at util/qemu-thread-posix.c:319
#4 0x0000562ccecb4752 in multifd_send_sync_main (rs=<optimized out>) at /qemu/migration/ram.c:1099
#5 0x0000562ccecb95f4 in ram_save_iterate (f=0x562cd0ecc000, opaque=<optimized out>) at /qemu/migration/ram.c:3550
#6 0x0000562ccef43c23 in qemu_savevm_state_iterate (f=0x562cd0ecc000, postcopy=false) at migration/savevm.c:1189
#7 0x0000562ccef3dcf3 in migration_iteration_run (s=0x562cd09fabf0) at migration/migration.c:3131
#8 migration_thread (opaque=opaque@entry=0x562cd09fabf0) at migration/migration.c:3258
#9 0x0000562ccf0a4c26 in qemu_thread_start (args=<optimized out>) at util/qemu-thread-posix.c:502
#10 0x00007f4d669d9e25 in start_thread () from /lib64/libpthread.so.0
#11 0x00007f4d6670635d in clone () from /lib64/libc.so.6
(gdb) f 4
#4 0x0000562ccecb4752 in multifd_send_sync_main (rs=<optimized out>) at /qemu/migration/ram.c:1099
1099 qemu_sem_wait(&p->sem_sync);
(gdb) list
1094 }
1095 for (i = 0; i < migrate_multifd_channels(); i++) {
1096 MultiFDSendParams *p = &multifd_send_state->params[i];
1097
1098 trace_multifd_send_sync_main_wait(p->id);
1099 qemu_sem_wait(&p->sem_sync);
1100 }
1101 trace_multifd_send_sync_main(multifd_send_state->packet_num);
1102 }
1103
(gdb) p i
$1 = 0
(gdb) p multifd_send_state->params[0].pending_job
$2 = 2 //It means the job before MULTIFD_FLAG_SYNC has already fail
(gdb) p multifd_send_state->params[0].quit
$3 = true
Signed-off-by: Ivan Ren <ivanren@tencent.com>
Message-Id: <1567044996-2362-1-git-send-email-ivanren@tencent.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
There is a race between TCG and accesses to the dirty log:
vCPU thread reader thread
----------------------- -----------------------
TLB check -> slow path
notdirty_mem_write
write to RAM
set dirty flag
clear dirty flag
TLB check -> fast path
read memory
write to RAM
Fortunately, in order to fix it, no change is required to the
vCPU thread. However, the reader thread must delay the read after
the vCPU thread has finished the write. This can be approximated
conservatively by run_on_cpu, which waits for the end of the current
translation block.
A similar technique is used by KVM, which has to do a synchronous TLB
flush after doing a test-and-clear of the dirty-page flags.
Reported-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It is used to do transactional movement of the bitmap (which is
possible in conjunction with merge command). Transactional bitmap
movement is needed in scenarios with external snapshot, when we don't
want to leave copy of the bitmap in the base image.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190708220502.12977-3-jsnow@redhat.com
[Edited "since" version to 4.2 --js]
Signed-off-by: John Snow <jsnow@redhat.com>
Add a public interface for get. While we're at it,
rename "bdrv_get_dirty_bitmap_locked" to "bdrv_dirty_bitmap_get_locked".
(There are more functions to rename to the bdrv_dirty_bitmap_VERB form,
but they will wait until the conclusion of this series.)
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190709232550.10724-11-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
-----BEGIN PGP SIGNATURE-----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=eSUz
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/armbru/tags/pull-include-2019-08-13-v2' into staging
Header cleanup patches for 2019-08-13
# gpg: Signature made Fri 16 Aug 2019 12:39:12 BST
# gpg: using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg: issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* remotes/armbru/tags/pull-include-2019-08-13-v2: (29 commits)
sysemu: Split sysemu/runstate.h off sysemu/sysemu.h
sysemu: Move the VMChangeStateEntry typedef to qemu/typedefs.h
Include sysemu/sysemu.h a lot less
Clean up inclusion of sysemu/sysemu.h
numa: Move remaining NUMA declarations from sysemu.h to numa.h
Include sysemu/hostmem.h less
numa: Don't include hw/boards.h into sysemu/numa.h
Include hw/boards.h a bit less
Include hw/qdev-properties.h less
Include qemu/main-loop.h less
Include qemu/queue.h slightly less
Include hw/hw.h exactly where needed
Include qom/object.h slightly less
Include exec/memory.h slightly less
Include migration/vmstate.h less
migration: Move the VMStateDescription typedef to typedefs.h
Clean up inclusion of exec/cpu-common.h
Include hw/irq.h a lot less
typedefs: Separate incomplete types and function types
ide: Include hw/ide/internal a bit less outside hw/ide/
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
sysemu/sysemu.h is a rather unfocused dumping ground for stuff related
to the system-emulator. Evidence:
* It's included widely: in my "build everything" tree, changing
sysemu/sysemu.h still triggers a recompile of some 1100 out of 6600
objects (not counting tests and objects that don't depend on
qemu/osdep.h, down from 5400 due to the previous two commits).
* It pulls in more than a dozen additional headers.
Split stuff related to run state management into its own header
sysemu/runstate.h.
Touching sysemu/sysemu.h now recompiles some 850 objects. qemu/uuid.h
also drops from 1100 to 850, and qapi/qapi-types-run-state.h from 4400
to 4200. Touching new sysemu/runstate.h recompiles some 500 objects.
Since I'm touching MAINTAINERS to add sysemu/runstate.h anyway, also
add qemu/main-loop.h.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190812052359.30071-30-armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
[Unbreak OS-X build]
In my "build everything" tree, changing sysemu/sysemu.h triggers a
recompile of some 5400 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h).
hw/qdev-core.h includes sysemu/sysemu.h since recent commit e965ffa70a
"qdev: add qdev_add_vm_change_state_handler()". This is a bad idea:
hw/qdev-core.h is widely included.
Move the declaration of qdev_add_vm_change_state_handler() to
sysemu/sysemu.h, and drop the problematic include from hw/qdev-core.h.
Touching sysemu/sysemu.h now recompiles some 1800 objects.
qemu/uuid.h also drops from 5400 to 1800. A few more headers show
smaller improvement: qemu/notify.h drops from 5600 to 5200,
qemu/timer.h from 5600 to 4500, and qapi/qapi-types-run-state.h from
5500 to 5000.
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20190812052359.30071-28-armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
In my "build everything" tree, changing hw/qdev-properties.h triggers
a recompile of some 2700 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h).
Many places including hw/qdev-properties.h (directly or via hw/qdev.h)
actually need only hw/qdev-core.h. Include hw/qdev-core.h there
instead.
hw/qdev.h is actually pointless: all it does is include hw/qdev-core.h
and hw/qdev-properties.h, which in turn includes hw/qdev-core.h.
Replace the remaining uses of hw/qdev.h by hw/qdev-properties.h.
While there, delete a few superfluous inclusions of hw/qdev-core.h.
Touching hw/qdev-properties.h now recompiles some 1200 objects.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Daniel P. Berrangé" <berrange@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20190812052359.30071-22-armbru@redhat.com>
In my "build everything" tree, changing qemu/main-loop.h triggers a
recompile of some 5600 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h). It includes block/aio.h,
which in turn includes qemu/event_notifier.h, qemu/notify.h,
qemu/processor.h, qemu/qsp.h, qemu/queue.h, qemu/thread-posix.h,
qemu/thread.h, qemu/timer.h, and a few more.
Include qemu/main-loop.h only where it's needed. Touching it now
recompiles only some 1700 objects. For block/aio.h and
qemu/event_notifier.h, these numbers drop from 5600 to 2800. For the
others, they shrink only slightly.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190812052359.30071-21-armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Drop unnecessary inclusions from headers. Downgrade a few more to
exec/hwaddr.h.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190812052359.30071-17-armbru@redhat.com>
In my "build everything" tree, changing migration/vmstate.h triggers a
recompile of some 2700 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h).
hw/hw.h supposedly includes it for convenience. Several other headers
include it just to get VMStateDescription. The previous commit made
that unnecessary.
Include migration/vmstate.h only where it's still needed. Touching it
now recompiles only some 1600 objects.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20190812052359.30071-16-armbru@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
migration/qemu-file.h neglects to include it even though it needs
ram_addr_t. Fix that. Drop a few superfluous inclusions elsewhere.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190812052359.30071-14-armbru@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20190814020218.1868-6-quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This makes easy to debug things because when you want for all threads
to arrive at that semaphore, you know which one your are waiting for.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20190814020218.1868-3-quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20190814020218.1868-2-quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Move migration helpers for strings under include/, so they can be used
outside of migration/
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20190808150325.21939-2-marcandre.lureau@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
For migration incoming side, it either quit in precopy or postcopy. It
is safe to use the mis->bh for both instead of allocating a dedicated
QEMUBH for postcopy.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190805053146.32326-1-richardw.yang@linux.intel.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Rename for better understanding of the code.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20190808033155.30162-1-richardw.yang@linux.intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Multifd sync will send MULTIFD_FLAG_SYNC flag info to destination, add
these bytes to ram_counters record.
Signed-off-by: Ivan Ren <ivanren@tencent.com>
Suggested-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <1564464816-21804-4-git-send-email-ivanren@tencent.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Limit the speed of multifd migration through common speed limitation
qemu file.
Signed-off-by: Ivan Ren <ivanren@tencent.com>
Message-Id: <1564464816-21804-3-git-send-email-ivanren@tencent.com>
Reviewed-by: Wei Yang <richardw.yang@linux.intel.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Add qemu_file_update_transfer for just update bytes_xfer for speed
limitation. This will be used for further migration feature such as
multifd migration.
Signed-off-by: Ivan Ren <ivanren@tencent.com>
Reviewed-by: Wei Yang <richardw.yang@linux.intel.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <1564464816-21804-2-git-send-email-ivanren@tencent.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This patch fix a multifd migration bug in migration speed calculation, this
problem can be reproduced as follows:
1. start a vm and give a heavy memory write stress to prevent the vm be
successfully migrated to destination
2. begin a migration with multifd
3. migrate for a long time [actually, this can be measured by transferred bytes]
4. migrate cancel
5. begin a new migration with multifd, the migration will directly run into
migration_completion phase
Reason as follows:
Migration update bandwidth and s->threshold_size in function
migration_update_counters after BUFFER_DELAY time:
current_bytes = migration_total_bytes(s);
transferred = current_bytes - s->iteration_initial_bytes;
time_spent = current_time - s->iteration_start_time;
bandwidth = (double)transferred / time_spent;
s->threshold_size = bandwidth * s->parameters.downtime_limit;
In multifd migration, migration_total_bytes function return
qemu_ftell(s->to_dst_file) + ram_counters.multifd_bytes.
s->iteration_initial_bytes will be initialized to 0 at every new migration,
but ram_counters is a global variable, and history migration data will be
accumulated. So if the ram_counters.multifd_bytes is big enough, it may lead
pending_size >= s->threshold_size become false in migration_iteration_run
after the first migration_update_counters.
Signed-off-by: Ivan Ren <ivanren@tencent.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Wei Yang <richardw.yang@linux.intel.com>
Suggested-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <1564741121-1840-1-git-send-email-ivanren@tencent.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
MigrationState->bytes_xfer is only set to 0 in migrate_init().
Remove this unnecessary field.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20190402003106.17614-1-richardw.yang@linux.intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Use QEMU_IS_ALIGNED for the check, it would be more consistent with
other align calculations.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20190806004648.8659-3-richardw.yang@linux.intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The purpose of the calculation is to find a HostPage which is partially
dirty.
* fixup_start_addr points to the start of the HostPage to discard
* run_start points to the next HostPage to check
While in the middle stage, there would two cases for run_start:
* aligned with HostPage means this is not partially dirty
* not aligned means this is partially dirty
When it is aligned, no work and calculation is necessary. run_start
already points to the start of next HostPage and is ready to continue.
When it is not aligned, the calculation could be simplified with:
* fixup_start_addr = QEMU_ALIGN_DOWN(run_start, host_ratio)
* run_start = QEMU_ALIGN_UP(run_start, host_ratio)
By doing so, run_start always points to the next HostPage to check.
fixup_start_addr always points to the HostPage to discard.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20190806004648.8659-2-richardw.yang@linux.intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
In postcopy-ram.c, we provide three functions to discard certain
RAMBlock range:
* postcopy_discard_send_init()
* postcopy_discard_send_range()
* postcopy_discard_send_finish()
Currently, we allocate/deallocate PostcopyDiscardState for each RAMBlock
on sending discard information to destination. This is not necessary and
the same data area could be reused for each RAMBlock.
This patch defines PostcopyDiscardState a static variable. By doing so:
1) avoid memory allocation and deallocation to the system
2) avoid potential failure of memory allocation
3) hide some details for their users
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20190724010721.2146-1-richardw.yang@linux.intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
After cleanup, it would be clear to audience there are two cases
ram_load:
* precopy
* postcopy
And it is not necessary to check postcopy_running on each iteration for
precopy.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190725002023.2335-3-richardw.yang@linux.intel.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
It is not reasonable to continue when version_id mismatch.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20190722075339.25121-2-richardw.yang@linux.intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
LOADVM_QUIT allows a command to quit all layers of nested loadvm loops,
while current return value check is not that proper even it works now.
Current return value check "ret & LOADVM_QUIT" would return true if
bit[0] is 1. This would be true when ret is -1 which is used to indicate
an error of handling a command.
Since there is only one place return LOADVM_QUIT and no other
combination of return value, use "ret == LOADVM_QUIT" would be more
proper.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20190718064257.29218-1-richardw.yang@linux.intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
RAMBlock->used_length is always passed to migration_bitmap_sync_range(),
which could be retrieved from RAMBlock.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20190718012547.16373-1-richardw.yang@linux.intel.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Use common helper function to check the state.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20190719071129.11880-1-richardw.yang@linux.intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
There is only one place to set start_postcopy to true,
qmp_migrate_start_postcopy(), which make sure start_postcopy could be
set to true when migrate_postcopy() return true.
So start_postcopy is true implies the other one.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20190718083747.5859-1-richardw.yang@linux.intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
PostcopyState is already set to ADVISE at the beginning of
loadvm_postcopy_handle_advise().
Remove the redundant set.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20190711080816.6405-1-richardw.yang@linux.intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
in_postcopy and iterable_only are not SaveStateEntry specific, it would
be more proper to check them out of iteration.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20190709140924.13291-4-richardw.yang@linux.intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This is a preparation patch for further cleanup.
No functional change, just wrap two major part of
qemu_savevm_state_complete_precopy() into function.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20190709140924.13291-3-richardw.yang@linux.intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
It would be proper to flush file even for iterable_only case.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20190709140924.13291-2-richardw.yang@linux.intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This means it is not necessary to spare an extra variable to hold this
condition. Use host_offset directly is fine.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20190710050814.31344-3-richardw.yang@linux.intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Use the same way for run_end to calculate run_start, which saves one
operation.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20190710050814.31344-2-richardw.yang@linux.intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Since we break the loop when there is no more page to discard, we are
sure the following process would find some page to discard.
It is not necessary to check it again.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20190627020822.15485-4-richardw.yang@linux.intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
When one is equal or bigger then end, it means there is no page to
discard. Just break the loop in this case instead of processing it.
No functional change, just refactor it a little.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20190627020822.15485-3-richardw.yang@linux.intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
If one equals end, it means we have gone through the whole bitmap.
Use a more restrict check to skip a unnecessary condition.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20190627020822.15485-2-richardw.yang@linux.intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Consolidate time information fill up into its function for better
readability.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20190716005411.4156-1-richardw.yang@linux.intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Currently, there is no information about error if outgoing migration was failed
because of file channel errors.
Example (QMP session):
-> { "execute": "migrate", "arguments": { "uri": "exec:head -c 1" }}
<- { "return": {} }
...
-> { "execute": "query-migrate" }
<- { "return": { "status": "failed" }} // There is not error's description
And even in the QEMU's output there is nothing.
This patch
1) Adds errp for the most of QEMUFileOps
2) Adds qemu_file_get_error_obj/qemu_file_set_error_obj
3) And finally using of qemu_file_get_error_obj in migration.c
And now, the status for the mentioned fail will be:
-> { "execute": "query-migrate" }
<- { "return": { "status": "failed",
"error-desc": "Unable to write to command: Broken pipe" }}
Signed-off-by: Yury Kotov <yury-kotov@yandex-team.ru>
Message-Id: <20190422103420.15686-1-yury-kotov@yandex-team.ru>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
When migrate_cancel a multifd migration, if run sequence like this:
[source] [destination]
multifd_send_sync_main[finish]
multifd_recv_thread wait &p->sem_sync
shutdown to_dst_file
detect error from_src_file
send RAM_SAVE_FLAG_EOS[fail] [no chance to run multifd_recv_sync_main]
multifd_load_cleanup
join multifd receive thread forever
will lead destination qemu hung at following stack:
pthread_join
qemu_thread_join
multifd_load_cleanup
process_incoming_migration_co
coroutine_trampoline
Signed-off-by: Ivan Ren <ivanren@tencent.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <1561468699-9819-4-git-send-email-ivanren@tencent.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
When we 'migrate_cancel' a multifd migration, live_migration thread may
hung forever at some points, because of multifd_send_thread has already
exit for socket error:
1. multifd_send_pages may hung at qemu_sem_wait(&multifd_send_state->
channels_ready)
2. multifd_send_sync_main my hung at qemu_sem_wait(&multifd_send_state->
sem_sync)
Signed-off-by: Ivan Ren <ivanren@tencent.com>
Message-Id: <1561468699-9819-3-git-send-email-ivanren@tencent.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
---
Remove spurious not needed bits
When we 'migrate_cancel' a multifd migration, live_migration thread may
go into endless loop in multifd_send_pages functions.
Reproduce steps:
(qemu) migrate_set_capability multifd on
(qemu) migrate -d url
(qemu) [wait a while]
(qemu) migrate_cancel
Then may get live_migration 100% cpu usage in following stack:
pthread_mutex_lock
qemu_mutex_lock_impl
multifd_send_pages
multifd_queue_page
ram_save_multifd_page
ram_save_target_page
ram_save_host_page
ram_find_and_save_block
ram_find_and_save_block
ram_save_iterate
qemu_savevm_state_iterate
migration_iteration_run
migration_thread
qemu_thread_start
start_thread
clone
Signed-off-by: Ivan Ren <ivanren@tencent.com>
Message-Id: <1561468699-9819-2-git-send-email-ivanren@tencent.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reproduce the problem:
migrate
migrate_cancel
migrate
Error happen for memory migration
The reason as follows:
1. qemu start, ram_list.dirty_memory[DIRTY_MEMORY_MIGRATION] all set to
1 by a series of cpu_physical_memory_set_dirty_range
2. migration start:ram_init_bitmaps
- memory_global_dirty_log_start: begin log diry
- memory_global_dirty_log_sync: sync dirty bitmap to
ram_list.dirty_memory[DIRTY_MEMORY_MIGRATION]
- migration_bitmap_sync_range: sync ram_list.
dirty_memory[DIRTY_MEMORY_MIGRATION] to RAMBlock.bmap
and ram_list.dirty_memory[DIRTY_MEMORY_MIGRATION] is set to zero
3. migration data...
4. migrate_cancel, will stop log dirty
5. migration start:ram_init_bitmaps
- memory_global_dirty_log_start: begin log diry
- memory_global_dirty_log_sync: sync dirty bitmap to
ram_list.dirty_memory[DIRTY_MEMORY_MIGRATION]
- migration_bitmap_sync_range: sync ram_list.
dirty_memory[DIRTY_MEMORY_MIGRATION] to RAMBlock.bmap
and ram_list.dirty_memory[DIRTY_MEMORY_MIGRATION] is set to zero
Here RAMBlock.bmap only have new logged dirty pages, don't contain
the whole guest pages.
Signed-off-by: Ivan Ren <ivanren@tencent.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-Id: <1563115879-2715-1-git-send-email-ivanren@tencent.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
cpu_synchronize_all_post_init() is called twice in
loadvm_postcopy_handle_run_bh(), so remove one redundant call.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20190715080751.24304-1-richardw.yang@linux.intel.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Commit 6b6712efcc ('ram: Split dirty bitmap by RAMBlock') changes the
parameter of postcopy_send_discard_bm_ram(), while left the document
part untouched.
This patch correct the document and fix two typo by hand.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190715020549.15018-1-richardw.yang@linux.intel.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
By removing the share ram check, qemu is able to migrate
to private destination ram when x-ignore-shared capability
is on. Then we can create multiple destination VMs based
on the same source VM.
This changes the x-ignore-shared migration capability to
work similar to Lai's original bypass-shared-memory
work(https://lists.gnu.org/archive/html/qemu-devel/2018-04/msg00003.html)
which enables kata containers (https://katacontainers.io)
to implement the VM templating feature.
An example usage in kata containers(https://katacontainers.io):
1. Start the source VM:
qemu-system-x86 -m 2G \
-object memory-backend-file,id=mem0,size=2G,share=on,mem-path=/tmpfs/template-memory \
-numa node,memdev=mem0
2. Stop the template VM, set migration x-ignore-shared capability,
migrate "exec:cat>/tmpfs/state", quit it
3. Start target VM:
qemu-system-x86 -m 2G \
-object memory-backend-file,id=mem0,size=2G,share=off,mem-path=/tmpfs/template-memory \
-numa node,memdev=mem0 \
-incoming defer
4. connect to target VM qmp, set migration x-ignore-shared capability,
migrate_incoming "exec:cat /tmpfs/state"
5. create more target VMs repeating 3 and 4
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Yury Kotov <yury-kotov@yandex-team.ru>
Cc: Jiangshan Lai <laijs@hyper.sh>
Cc: Xu Wang <xu@hyper.sh>
Signed-off-by: Peng Tao <tao.peng@linux.alibaba.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <1560494113-1141-1-git-send-email-tao.peng@linux.alibaba.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Currently we are doing log_clear() right after log_sync() which mostly
keeps the old behavior when log_clear() was still part of log_sync().
This patch tries to further optimize the migration log_clear() code
path to split huge log_clear()s into smaller chunks.
We do this by spliting the whole guest memory region into memory
chunks, whose size is decided by MigrationState.clear_bitmap_shift (an
example will be given below). With that, we don't do the dirty bitmap
clear operation on the remote node (e.g., KVM) when we fetch the dirty
bitmap, instead we explicitly clear the dirty bitmap for the memory
chunk for each of the first time we send a page in that chunk.
Here comes an example.
Assuming the guest has 64G memory, then before this patch the KVM
ioctl KVM_CLEAR_DIRTY_LOG will be a single one covering 64G memory.
If after the patch, let's assume when the clear bitmap shift is 18,
then the memory chunk size on x86_64 will be 1UL<<18 * 4K = 1GB. Then
instead of sending a big 64G ioctl, we'll send 64 small ioctls, each
of the ioctl will cover 1G of the guest memory. For each of the 64
small ioctls, we'll only send if any of the page in that small chunk
was going to be sent right away.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190603065056.25211-12-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
cpu_physical_memory_sync_dirty_bitmap() has one RAMBlock* as
parameter, which means that it must be with RCU read lock held
already. Taking it again inside seems redundant. Removing it.
Instead comment on the functions about the RCU read lock.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20190603065056.25211-2-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
In case we gets a queued page, the order of block is interrupted. We may
not rely on the complete_round flag to say we have already searched the
whole blocks on the list.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20190605010828.6969-1-richardw.yang@linux.intel.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Notification from recv thread is not ordered, which means we may be
notified by one MultiFDRecvParams but adjust packet_num for another.
Move the adjustment after we are sure each recv thread are sync-ed.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-Id: <20190604023540.26532-1-richardw.yang@linux.intel.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
When we are not in the last_stage, we need to update the cache if page
is not the same.
Currently this procedure is scattered in two places and mixed with
encoding status check.
This patch extract this general step out to make the code a little bit
easy to read.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190610004159.20966-1-richardw.yang@linux.intel.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
On receiving RAM_SAVE_FLAG_EOS, multifd_recv_sync_main() is called to
synchronize receive threads. Current synchronization mechanism is to wait
for each channel's sem_sync semaphore. This semaphore is triggered by a
packet with MULTIFD_FLAG_SYNC flag. While in current implementation, we
don't do multifd_send_sync_main() to send such packet when
blk_mig_bulk_active() is true.
This will leads to the receive threads won't notify
multifd_recv_sync_main() by sem_sync. And multifd_recv_sync_main() will
always wait there.
[Note]: normal migration test works, while didn't test the
blk_mig_bulk_active() case. Since not sure how to produce this
situation.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20190612014337.11255-1-richardw.yang@linux.intel.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
It uses num in multifd_send(). Make it coherent.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Wei Yang <richardw.yang@linux.intel.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Basically, the context could get the MachineState reference via call
chains or unrecommended qdev_get_machine() in !CONFIG_USER_ONLY mode.
A local variable of the same name would be introduced in the declaration
phase out of less effort OR replace it on the spot if it's only used
once in the context. No semantic changes.
Signed-off-by: Like Xu <like.xu@linux.intel.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20190518205428.90532-4-like.xu@linux.intel.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Otherwise the FreeBSD compiler complains about an unused variable.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
We need to notify net filter to do checkpoint for Xen COLO, like KVM side.
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
No header includes qemu-common.h after this commit, as prescribed by
qemu-common.h's file comment.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523143508.25387-5-armbru@redhat.com>
[Rebased with conflicts resolved automatically, except for
include/hw/arm/xlnx-zynqmp.h hw/arm/nrf51_soc.c hw/arm/msf2-soc.c
block/qcow2-refcount.c block/qcow2-cluster.c block/qcow2-cache.c
target/arm/cpu.h target/lm32/cpu.h target/m68k/cpu.h target/mips/cpu.h
target/moxie/cpu.h target/nios2/cpu.h target/openrisc/cpu.h
target/riscv/cpu.h target/tilegx/cpu.h target/tricore/cpu.h
target/unicore32/cpu.h target/xtensa/cpu.h; bsd-user/main.c and
net/tap-bsd.c fixed up]
'postocpy' should be 'postcopy'.
CC: qemu-trivial@nongnu.org
Signed-off-by: Li Qiang <liq3ea@163.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20190525062832.18009-1-liq3ea@163.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
During migration, we would sync bitmap from ram_list.dirty_memory to
RAMBlock.bmap in cpu_physical_memory_sync_dirty_bitmap().
Since we set RAMBlock.bmap and ram_list.dirty_memory both to all 1, this
means at the first round this sync is meaningless and is a duplicated
work.
Leaving RAMBlock->bmap blank on allocating would have a side effect on
migration_dirty_pages, since it is calculated from the result of
cpu_physical_memory_sync_dirty_bitmap(). To keep it right, we need to
set migration_dirty_pages to 0 in ram_state_init().
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Currently, incoming migration through fd supports only command-line case:
E.g.
fork();
fd = open();
exec("qemu ... -incoming fd:%d", fd);
It's possible to use add-fd commands to pass fd for migration, but it's
invalid case. add-fd works with fdset but not with particular fds.
To work with getfd in incoming defer it's enough to use monitor_fd_param
instead of strtol. monitor_fd_param supports both cases:
* fd:123
* fd:fd_name (added by getfd).
And also the use of monitor_fd_param improves error messages.
Signed-off-by: Yury Kotov <yury-kotov@yandex-team.ru>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Besides init and destroy, MultiFDSendParams.sem_sync is not really used.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
This adds a new parameter to blk_new() which requires its callers to
declare from which AioContext this BlockBackend is going to be used (or
the locks of which AioContext need to be taken anyway).
The given context is only stored and kept up to date when changing
AioContexts. Actually applying the stored AioContext to the root node
is saved for another commit.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Shift from looking at every root BDS to *every* BDS. This will migrate
bitmaps that are attached to blockdev created nodes instead of just ones
attached to emulated storage devices.
Note that this will not migrate anonymous or internal-use bitmaps, as
those are defined as having no name.
This will also fix the Coverity issues Peter Maydell has been asking
about for the past several releases, as well as fixing a real bug.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Reported-by: Coverity 😅
Reported-by: aihua liang <aliang@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20190514201926.10407-1-jsnow@redhat.com
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1652490
Fixes: Coverity CID 1390625
CC: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <155800428514.543845.17558475870097990036.stgit@bahia.lan>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20190510233729.15554-1-richardw.yang@linux.intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
It fixes heap-use-after-free which was found by clang's ASAN.
Control flow of this use-after-free:
main_thread:
* Got SIGTERM and completes main loop
* Calls migration_shutdown
- migrate_fd_cancel (so, migration_thread begins to complete)
- object_unref(OBJECT(current_migration));
migration_thread:
* migration_iteration_finish -> schedule cleanup bh
* object_unref(OBJECT(s)); (Now, current_migration is freed)
* exits
main_thread:
* Calls vm_shutdown -> drain bdrvs -> main loop
-> cleanup_bh -> use after free
If you want to reproduce, these couple of sleeps will help:
vl.c:4613:
migration_shutdown();
+ sleep(2);
migration.c:3269:
+ sleep(1);
trace_migration_thread_after_loop();
migration_iteration_finish(s);
Original output:
qemu-system-x86_64: terminating on signal 15 from pid 31980 (<unknown process>)
=================================================================
==31958==ERROR: AddressSanitizer: heap-use-after-free on address 0x61900001d210
at pc 0x555558a535ca bp 0x7fffffffb190 sp 0x7fffffffb188
READ of size 8 at 0x61900001d210 thread T0 (qemu-vm-0)
#0 0x555558a535c9 in migrate_fd_cleanup migration/migration.c:1502:23
#1 0x5555594fde0a in aio_bh_call util/async.c:90:5
#2 0x5555594fe522 in aio_bh_poll util/async.c:118:13
#3 0x555559524783 in aio_poll util/aio-posix.c:725:17
#4 0x555559504fb3 in aio_wait_bh_oneshot util/aio-wait.c:71:5
#5 0x5555573bddf6 in virtio_blk_data_plane_stop
hw/block/dataplane/virtio-blk.c:282:5
#6 0x5555589d5c09 in virtio_bus_stop_ioeventfd hw/virtio/virtio-bus.c:246:9
#7 0x5555589e9917 in virtio_pci_stop_ioeventfd hw/virtio/virtio-pci.c:287:5
#8 0x5555589e22bf in virtio_pci_vmstate_change hw/virtio/virtio-pci.c:1072:9
#9 0x555557628931 in virtio_vmstate_change hw/virtio/virtio.c:2257:9
#10 0x555557c36713 in vm_state_notify vl.c:1605:9
#11 0x55555716ef53 in do_vm_stop cpus.c:1074:9
#12 0x55555716eeff in vm_shutdown cpus.c:1092:12
#13 0x555557c4283e in main vl.c:4617:5
#14 0x7fffdfdb482f in __libc_start_main
(/lib/x86_64-linux-gnu/libc.so.6+0x2082f)
#15 0x555556ecb118 in _start (x86_64-softmmu/qemu-system-x86_64+0x1977118)
0x61900001d210 is located 144 bytes inside of 952-byte region
[0x61900001d180,0x61900001d538)
freed by thread T6 (live_migration) here:
#0 0x555556f76782 in __interceptor_free
/tmp/final/llvm.src/projects/compiler-rt/lib/asan/asan_malloc_linux.cc:124:3
#1 0x555558d5fa94 in object_finalize qom/object.c:618:9
#2 0x555558d57651 in object_unref qom/object.c:1068:9
#3 0x555558a55588 in migration_thread migration/migration.c:3272:5
#4 0x5555595393f2 in qemu_thread_start util/qemu-thread-posix.c:502:9
#5 0x7fffe057f6b9 in start_thread (/lib/x86_64-linux-gnu/libpthread.so.0+0x76b9)
previously allocated by thread T0 (qemu-vm-0) here:
#0 0x555556f76b03 in __interceptor_malloc
/tmp/final/llvm.src/projects/compiler-rt/lib/asan/asan_malloc_linux.cc:146:3
#1 0x7ffff6ee37b8 in g_malloc (/lib/x86_64-linux-gnu/libglib-2.0.so.0+0x4f7b8)
#2 0x555558d58031 in object_new qom/object.c:640:12
#3 0x555558a31f21 in migration_object_init migration/migration.c:139:25
#4 0x555557c41398 in main vl.c:4320:5
#5 0x7fffdfdb482f in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2082f)
Thread T6 (live_migration) created by T0 (qemu-vm-0) here:
#0 0x555556f5f0dd in pthread_create
/tmp/final/llvm.src/projects/compiler-rt/lib/asan/asan_interceptors.cc:210:3
#1 0x555559538cf9 in qemu_thread_create util/qemu-thread-posix.c:539:11
#2 0x555558a53304 in migrate_fd_connect migration/migration.c:3332:5
#3 0x555558a72bd8 in migration_channel_connect migration/channel.c:92:5
#4 0x555558a6ef87 in exec_start_outgoing_migration migration/exec.c:42:5
#5 0x555558a4f3c2 in qmp_migrate migration/migration.c:1922:9
#6 0x555558bb4f6a in qmp_marshal_migrate qapi/qapi-commands-migration.c:607:5
#7 0x555559363738 in do_qmp_dispatch qapi/qmp-dispatch.c:131:5
#8 0x555559362a15 in qmp_dispatch qapi/qmp-dispatch.c:174:11
#9 0x5555571bac15 in monitor_qmp_dispatch monitor.c:4124:11
#10 0x55555719a22d in monitor_qmp_bh_dispatcher monitor.c:4207:9
#11 0x5555594fde0a in aio_bh_call util/async.c:90:5
#12 0x5555594fe522 in aio_bh_poll util/async.c:118:13
#13 0x5555595201e0 in aio_dispatch util/aio-posix.c:460:5
#14 0x555559503553 in aio_ctx_dispatch util/async.c:261:5
#15 0x7ffff6ede196 in g_main_context_dispatch
(/lib/x86_64-linux-gnu/libglib-2.0.so.0+0x4a196)
SUMMARY: AddressSanitizer: heap-use-after-free migration/migration.c:1502:23
in migrate_fd_cleanup
Shadow bytes around the buggy address:
0x0c327fffb9f0: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
0x0c327fffba00: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
0x0c327fffba10: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
0x0c327fffba20: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
0x0c327fffba30: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd
=>0x0c327fffba40: fd fd[fd]fd fd fd fd fd fd fd fd fd fd fd fd fd
0x0c327fffba50: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd
0x0c327fffba60: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd
0x0c327fffba70: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd
0x0c327fffba80: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd
0x0c327fffba90: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd
Shadow byte legend (one shadow byte represents 8 application bytes):
Addressable: 00
Partially addressable: 01 02 03 04 05 06 07
Heap left redzone: fa
Freed heap region: fd
Stack left redzone: f1
Stack mid redzone: f2
Stack right redzone: f3
Stack after return: f5
Stack use after scope: f8
Global redzone: f9
Global init order: f6
Poisoned by user: f7
Container overflow: fc
Array cookie: ac
Intra object redzone: bb
ASan internal: fe
Left alloca redzone: ca
Right alloca redzone: cb
Shadow gap: cc
==31958==ABORTING
Signed-off-by: Yury Kotov <yury-kotov@yandex-team.ru>
Message-Id: <20190408113343.2370-1-yury-kotov@yandex-team.ru>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Fixed up comment formatting
On source side, we have qemu_savevm_state_header() to send related data,
while on the receiving side those steps are scattered in
qemu_loadvm_state().
This patch wrap those related steps into qemu_loadvm_state_header() to
make it friendly to read.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20190424004700.12766-5-richardw.yang@linux.intel.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
In migration_thread() and qemu_savevm_state(), we savevm_state in
following sequence:
qemu_savevm_state_header(f);
qemu_savevm_state_setup(f);
Then it would be more proper to loadvm_state in the save sequence.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20190424004700.12766-4-richardw.yang@linux.intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Current call flow of save_snapshot is:
save_snapshot
migration_is_blocked
qemu_savevm_state
migration_is_blocked
Since qemu_savevm_state is only called in save_snapshot, this means
migration_is_blocked has been already checked.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20190424004700.12766-2-richardw.yang@linux.intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Since the ram bitmap and the unsent bitmap are split by RAMBlock
in commit 6b6712e, it's better to update the comments about them.
Signed-off-by: Yi Wang <wang.yi59@zte.com.cn>
Message-Id: <1555311089-18610-1-git-send-email-wang.yi59@zte.com.cn>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
We can eliminate to pass 0.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20190430034412.12935-2-richardw.yang@linux.intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The colo_do_failover no need the input parameter.
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Message-Id: <20190426090730.2691-2-chen.zhang@intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The only caller that checks the error code is looking for != 0,
so returning false is incorrect.
Fixes: 5aaac46793 "migration: savevm: consult migration blockers"
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Message-Id: <b991a4d0e6c4253bc08b2794c6084be55fc72e1d.1554851834.git.crobinso@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
subsection_found is true implies vmdesc is not NULL.
This patch remove the additional check on vmdesc and rename
subsection_found to vmdesc_has_subsections to make it more self-explain.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20190403011016.12549-1-richardw.yang@linux.intel.com>
Acked-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
MigrationState->xfer_limit is only set to 0 in migrate_init().
Remove this unnecessary field.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20190326055726.10539-1-richardw.yang@linux.intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
During each iteration, se->ops is checked before each loop. So it is not
necessary to check it again and simplify the following check a little.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20190327013130.26259-1-richardw.yang@linux.intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Coverity points out (CID 1400442) that in this code:
if (packet->pages_alloc > p->pages->allocated) {
multifd_pages_clear(p->pages);
multifd_pages_init(packet->pages_alloc);
}
we free p->pages in multifd_pages_clear() but continue to
use it in the following code. We also leak memory, because
multifd_pages_init() returns the pointer to a new MultiFDPages_t
struct but we are ignoring its return value.
Fix both of these bugs by adding the missing assignment of
the newly created struct to p->pages.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-id: 20190409151830.6024-1-peter.maydell@linaro.org
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
I found upstream codes conflict with COLO and lead to crash,
and I located to this patch:
commit 386a907b37
Author: Wei Wang <wei.w.wang@intel.com>
Date: Tue Dec 11 16:24:49 2018 +0800
migration: use bitmap_mutex in migration_bitmap_clear_dirty
My colleague Wei's patch add bitmap_mutex in migration_bitmap_clear_dirty,
but COLO didn't initialize the bitmap_mutex. So we always get an error
when COLO start up. like that:
qemu-system-x86_64: util/qemu-thread-posix.c:64: qemu_mutex_lock_impl: Assertion `mutex->initialized' failed.
This patch add the bitmap_mutex initialize and destroy in COLO
lifecycle.
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Message-Id: <20190329222951.28945-1-chen.zhang@intel.com>
Reviewed-by: Wei Wang <wei.w.wang@intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
migrate_add_blocker() asserts we have a current_migration object, in
migrate_get_current(). We do only after migration_object_init().
This contributes to the following dependency cycle:
* configure_blockdev() must run before machine_set_property()
so machine properties can refer to block backends
* machine_set_property() before configure_accelerator()
so machine properties like kvm-irqchip get applied
* configure_accelerator() before migration_object_init()
so that Xen's accelerator compat properties get applied.
* migration_object_init() before configure_blockdev()
so configure_blockdev() can add migration blockers
The cycle was closed when recent commit cda4aa9a5a "Create block
backends before setting machine properties" added the first
dependency, and satisfied it by violating the last one. Broke block
backends that add migration blockers, as demonstrated by qemu-iotests
055.
To fix it, break the last dependency: make migrate_add_blocker()
usable before migration_object_init().
The previous commit already removed the use of migrate_get_current()
from migrate_add_blocker() itself. Didn't quite do the trick, as
there's another one hiding in migration_is_idle().
The use there isn't actually necessary: when no migration object has
been created yet, migration is surely idle. Make migration_is_idle()
return true then.
Fixes: cda4aa9a5a
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190401090827.20793-4-armbru@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
This reverts commit 3df663e575.
This reverts commit b605c47b57.
Command line option --only-migratable is for disallowing any
configuration that can block migration.
Initially, --only-migratable set global variable @only_migratable.
Commit 3df663e575 "migration: move only_migratable to MigrationState"
replaced it by MigrationState member @only_migratable. That was a
mistake.
First, it doesn't make sense on the design level. MigrationState
captures the state of an individual migration, but --only-migratable
isn't a property of an individual migration, it's a restriction on
QEMU configuration. With fault tolerance, we could have several
migrations at once. --only-migratable would certainly protect all of
them. Storing it in MigrationState feels inappropriate.
Second, it contributes to a dependency cycle that manifests itself as
a bug now.
Putting @only_migratable into MigrationState means its available only
after migration_object_init().
We can't set it before migration_object_init(), so we delay setting it
with a global property (this is fixup commit b605c47b57 "migration:
fix handling for --only-migratable").
We can't get it before migration_object_init(), so anything that uses
it can only run afterwards.
Since migrate_add_blocker() needs to obey --only-migratable, any code
adding migration blockers can run only afterwards. This contributes
to the following dependency cycle:
* configure_blockdev() must run before machine_set_property()
so machine properties can refer to block backends
* machine_set_property() before configure_accelerator()
so machine properties like kvm-irqchip get applied
* configure_accelerator() before migration_object_init()
so that Xen's accelerator compat properties get applied.
* migration_object_init() before configure_blockdev()
so configure_blockdev() can add migration blockers
The cycle was closed when recent commit cda4aa9a5a "Create block
backends before setting machine properties" added the first
dependency, and satisfied it by violating the last one. Broke block
backends that add migration blockers.
Moving @only_migratable into MigrationState was a mistake. Revert it.
This doesn't quite break the "migration_object_init() before
configure_blockdev() dependency, since migrate_add_blocker() still has
another dependency on migration_object_init(). To be addressed the
next commit.
Note that the reverted commit made -only-migratable sugar for -global
migration.only-migratable=on below the hood. Documentation has only
ever mentioned -only-migratable. This commit removes the arcane &
undocumented alternative to -only-migratable again. Nobody should be
using it.
Conflicts:
include/migration/misc.h
migration/migration.c
migration/migration.h
vl.c
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190401090827.20793-3-armbru@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
- Rebase last pull request
- Drop multifd
- several other minor fixesLaLaLa
-----BEGIN PGP SIGNATURE-----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=kjyq
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/juanquintela/tags/migration-pull-request' into staging
Pull request
- Rebase last pull request
- Drop multifd
- several other minor fixesLaLaLa
# gpg: Signature made Mon 25 Mar 2019 17:46:29 GMT
# gpg: using RSA key F487EF185872D723
# gpg: Good signature from "Juan Quintela <quintela@redhat.com>" [full]
# gpg: aka "Juan Quintela <quintela@trasno.org>" [full]
# Primary key fingerprint: 1899 FF8E DEBF 58CC EE03 4B82 F487 EF18 5872 D723
* remotes/juanquintela/tags/migration-pull-request:
migration/postcopy: Update the bandwidth during postcopy
Migration/colo.c: Make user obtain the last COLO mode info after failover
Migration/colo.c: Add the necessary checks for colo_do_failover
Migration/colo.c: Add new COLOExitReason to handle all failover state
Migration/colo.c: Fix COLO failover status error
migration/rdma: Check qemu_rdma_init_one_block
migration: add support for a "tls-authz" migration parameter
multifd: Drop x-
multifd: Add some padding
multifd: Change default packet size
multifd: Be flexible about packet size
multifd: Drop x-multifd-page-count parameter
multifd: Create new next_packet_size field
multifd: Rename "size" member to pages_alloc
multifd: Only send pages when packet are not empty
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The recently added max-postcopy-bandwidth parameter is only read
at the transition from precopy->postcopy where as the older
max-bandwidth parameter updates the migration bandwidth when changed
even if the migration is already running.
Fix this discrepency so that:
a) You can change the bandwidth during postcopy by setting
max-postcopy-bandwidth
b) Changing max-bandwidth during postcopy has no effect
(it currently changes the postcopy bandwidth which isn't
expected).
Fixes: 7e555c6c
bz: https://bugzilla.redhat.com/show_bug.cgi?id=1686321
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Add the last_colo_mode to save the status after failover.
This patch can solve the issue that user want to get last colo mode
use query_colo_status after failover.
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
In this patch we add the processing state for COLOExitReason,
because we have to identify COLO in the failover processing state or
failover error state. In the way, we can handle all the failover state.
We have improved the description of the COLOExitReason by the way.
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
When finished COLO failover, the status is FAILOVER_STATUS_COMPLETED.
The origin codes misunderstand the FAILOVER_STATUS_REQUIRE.
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Actually it can't fail at the moment, but Coverity moans that
it's the only place it's not checked, and it's an easy check.
Reported-by: Coverity (CID 1399413)
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The QEMU instance that runs as the server for the migration data
transport (ie the target QEMU) needs to be able to configure access
control so it can prevent unauthorized clients initiating an incoming
migration. This adds a new 'tls-authz' migration parameter that is used
to provide the QOM ID of a QAuthZ subclass instance that provides the
access control check. This is checked against the x509 certificate
obtained during the TLS handshake.
For example, when starting a QEMU for incoming migration, it is
possible to give an example identity of the source QEMU that is
intended to be connecting later:
$QEMU \
-monitor stdio \
-incoming defer \
...other args...
(qemu) object_add tls-creds-x509,id=tls0,dir=/home/berrange/qemutls,\
endpoint=server,verify-peer=yes \
(qemu) object_add authz-simple,id=auth0,identity=CN=laptop.example.com,,\
O=Example Org,,L=London,,ST=London,,C=GB \
(qemu) migrate_incoming tcp:localhost:9000
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
We make it supported from now on.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Add some padding.
MultifdInit_t is padded to 64 bytes.
MultiFDPacket_t is padded to 320bytes (64 * 5).
Signed-off-by: Juan Quintela <quintela@redhat.com>
We moved from 64KB to 512KB, as it makes less locking contention
without any downside in testing.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
This way we can change the packet size in the future and everything
will work. We choose an arbitrary big number (100 times configured
size) as a limit about how big we will reallocate.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Libvirt don't want to expose (and explain it). From now on we measure
the number of packages in bytes instead of pages, so it is the same
independently of architecture. We choose the page size of x86.
Notice that in the following patch we make this variable.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
We need to send this field when we add compression support. As we are
still on x- stage, we can do this kind of changes.
Signed-off-by: Juan Quintela <quintela@redhat.com>
It really indicates what is the number of allocated pages for one
packet. Once there rename "used" to "pages_used".
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
We send packages without pages sometimes for sysnchronizanion. The
iov functions do the right thing, but we will be changing this code in
future patches.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Some trace points are attributed to the wrong source file. Happens
when we neglect to update trace-events for code motion, or add events
in the wrong place, or misspell the file name.
Clean up with help of cleanup-trace-events.pl. Same funnies as in the
previous commit, of course. Manually shorten its change to
linux-user/trace-events to */signal.c.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-id: 20190314180929.27722-6-armbru@redhat.com
Message-Id: <20190314180929.27722-6-armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
We spell out sub/dir/ in sub/dir/trace-events' comments pointing to
source files. That's because when trace-events got split up, the
comments were moved verbatim.
Delete the sub/dir/ part from these comments. Gets rid of several
misspellings.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190314180929.27722-3-armbru@redhat.com
Message-Id: <20190314180929.27722-3-armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Commit a88b179f introduced the ability to set and query bitmap
persistence, but with an atypical spelling.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-id: 20190308205845.25734-1-eblake@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Instead of checking against busy, inconsistent, or read only directly,
use a check function with permissions bits that let us streamline the
checks without reproducing them in many places.
Included in this patch are permissions changes that simply add the
inconsistent check to existing permissions call spots, without
addressing existing bugs.
In general, this means that busy+readonly checks become BDRV_BITMAP_DEFAULT,
which checks against all three conditions. busy-only checks become
BDRV_BITMAP_ALLOW_RO.
Notably, remove allows inconsistent bitmaps, so it doesn't follow the pattern.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20190301191545.8728-4-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
These mean the same thing now. Unify them and rename the merged call
bdrv_dirty_bitmap_busy to indicate semantically what we are describing,
as well as help disambiguate from the various _locked and _unlocked
versions of bitmap helpers that refer to mutex locks.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20190223000614.13894-8-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
"Frozen" was a good description a long time ago, but it isn't adequate now.
Rename the frozen predicate to has_successor to make the semantics of the
predicate more clear to outside callers.
In the process, remove some calls to frozen() that no longer semantically
make sense. For bdrv_enable_dirty_bitmap_locked and
bdrv_disable_dirty_bitmap_locked, it doesn't make sense to prohibit QEMU
internals from performing this action when we only wished to prohibit QMP
users from issuing these commands. All of the QMP API commands for bitmap
manipulation already check against user_locked() to prohibit these actions.
Several other assertions really want to check that the bitmap isn't in-use
by another operation -- use the bitmap_user_locked function for this instead,
which presently also checks for has_successor. This leaves some redundant
checks of has_successor through different helpers that are addressed in
forthcoming patches.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20190223000614.13894-3-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
slirp migration code uses QEMU vmstate so far, when building WITH_QEMU.
Introduce slirp_state_{load,save,version}() functions to move the
state saving handling to libslirp side.
So far, the bitstream compatibility should remain equal with current
QEMU, as this is effectively using the same code, with the same format
etc. When libslirp is made standalone, we will need some mechanism to
ensure bitstream compatibility regardless of the libslirp version
installed. See the FIXME note in the code.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20190212162524.31504-3-marcandre.lureau@redhat.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Delay to close COLO for auto start VM after failover.
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190303145021.2962-4-chen.zhang@intel.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
In migration_incoming_state_destroy(void) will check the mis->to_src_file
to double close the mis->to_src_file when occur COLO failover.
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190303145021.2962-2-chen.zhang@intel.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This patch adds the free page optimization enable flag, and a function
to set this flag. When the free page optimization is enabled, not all
the pages are needed to be sent in the bulk stage.
Why using a new flag, instead of directly disabling ram_bulk_stage when
the optimization is running?
Thanks for Peter Xu's reminder that disabling ram_bulk_stage will affect
the use of compression. Please see save_page_use_compression. When
xbzrle and compression are used, if free page optimizaion causes the
ram_bulk_stage to be disabled, save_page_use_compression will return
false, which disables the use of compression. That is, if free page
optimization avoids the sending of half of the guest pages, the other
half of pages loses the benefits of compression in the meantime. Using a
new flag to let migration_bitmap_find_dirty skip the free pages in the
bulk stage will avoid the above issue.
Signed-off-by: Wei Wang <wei.w.wang@intel.com>
CC: Dr. David Alan Gilbert <dgilbert@redhat.com>
CC: Juan Quintela <quintela@redhat.com>
CC: Michael S. Tsirkin <mst@redhat.com>
CC: Peter Xu <peterx@redhat.com>
Message-Id: <1544516693-5395-7-git-send-email-wei.w.wang@intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This patch adds a notifier chain for the memory precopy. This enables various
precopy optimizations to be invoked at specific places.
Signed-off-by: Wei Wang <wei.w.wang@intel.com>
CC: Dr. David Alan Gilbert <dgilbert@redhat.com>
CC: Juan Quintela <quintela@redhat.com>
CC: Michael S. Tsirkin <mst@redhat.com>
CC: Peter Xu <peterx@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-Id: <1544516693-5395-6-git-send-email-wei.w.wang@intel.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This patch adds an API to clear bits corresponding to guest free pages
from the dirty bitmap. Spilt the free page block if it crosses the QEMU
RAMBlock boundary.
Signed-off-by: Wei Wang <wei.w.wang@intel.com>
CC: Dr. David Alan Gilbert <dgilbert@redhat.com>
CC: Juan Quintela <quintela@redhat.com>
CC: Michael S. Tsirkin <mst@redhat.com>
CC: Peter Xu <peterx@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-Id: <1544516693-5395-5-git-send-email-wei.w.wang@intel.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The bitmap mutex is used to synchronize threads to update the dirty
bitmap and the migration_dirty_pages counter. For example, the free
page optimization clears bits of free pages from the bitmap in an
iothread context. This patch makes migration_bitmap_clear_dirty update
the bitmap and counter under the mutex.
Signed-off-by: Wei Wang <wei.w.wang@intel.com>
CC: Dr. David Alan Gilbert <dgilbert@redhat.com>
CC: Juan Quintela <quintela@redhat.com>
CC: Michael S. Tsirkin <mst@redhat.com>
CC: Peter Xu <peterx@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-Id: <1544516693-5395-4-git-send-email-wei.w.wang@intel.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
It will be used to store the uri parameters. We want this only for
tcp, so we don't set it for other uris. We need it to know what port
is migration running.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
dgilbert: Removed DummyStruct as suggested by Eric & Markus
--
Currently we don't check which capabilities set in the source QEMU.
We just expect that the target QEMU has the same enabled capabilities.
Add explicit validation for capabilities to make sure that the target VM
has them too. This is enabled for only new capabilities to keep compatibily.
Signed-off-by: Yury Kotov <yury-kotov@yandex-team.ru>
Message-Id: <20190215174548.2630-6-yury-kotov@yandex-team.ru>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
dgilbert: Manual merge
If ignore-shared capability is set then skip shared RAMBlocks during the
RAM migration.
Also, move qemu_ram_foreach_migratable_block (and rename) to the
migration code, because it requires access to the migration capabilities.
Signed-off-by: Yury Kotov <yury-kotov@yandex-team.ru>
Message-Id: <20190215174548.2630-4-yury-kotov@yandex-team.ru>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
We want to use local migration to update QEMU for running guests.
In this case we don't need to migrate shared (file backed) RAM.
So, add a capability to ignore such blocks during live migration.
Signed-off-by: Yury Kotov <yury-kotov@yandex-team.ru>
Message-Id: <20190215174548.2630-3-yury-kotov@yandex-team.ru>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Currently, qemu_ram_foreach_* calls RAMBlockIterFunc with many
block-specific arguments. But often iter func needs RAMBlock*.
This refactoring is needed for fast access to RAMBlock flags from
qemu_ram_foreach_block's callback. The only way to achieve this now
is to call qemu_ram_block_from_host (which also enumerates blocks).
So, this patch reduces complexity of
qemu_ram_foreach_block() -> cb() -> qemu_ram_block_from_host()
from O(n^2) to O(n).
Fix RAMBlockIterFunc definition and add some functions to read
RAMBlock* fields witch were passed.
Signed-off-by: Yury Kotov <yury-kotov@yandex-team.ru>
Message-Id: <20190215174548.2630-2-yury-kotov@yandex-team.ru>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Configuring QEMU with:
../configure --cc=clang --enable-rdma
Leads to compilation error:
CC migration/rdma.o
CC migration/block.o
qemu/migration/rdma.c:3615:58: error: taking address of packed member 'rkey' of class or structure
'RDMARegisterResult' may result in an unaligned pointer value [-Werror,-Waddress-of-packed-member]
(uintptr_t)host_addr, NULL, ®_result->rkey,
^~~~~~~~~~~~~~~~
Fix it by using a temp local variable.
Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Message-Id: <20190304184923.24215-1-marcel.apfelbaum@gmail.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Currently we cleanup the migration object as we exit main after the
main_loop finishes; however if there's a migration running things
get messy and we can end up with the migration thread still trying
to access freed structures.
We now take a ref to the object around the migration thread itself,
so the act of dropping the ref during exit doesn't cause us to lose
the state until the thread quits.
Cancelling the migration during migration also tries to get the thread
to quit.
We do this a bit earlier; so hopefully migration gets out of the way
before all the devices etc are freed.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20190227164900.16378-1-dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
If the migration fails before the channel is open (e.g. a bad
address) we end up in the cleanup with rdma->channel==NULL.
Spotted by Coverity: CID 1398634
Fixes: fbbaacab27
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190214185351.5927-1-dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
During a cancelled migration there's a race where the fd can
go into an error state before we get back around the migration loop
and migration_detect_error transitions from cancelling->failed.
Check for cancelled/cancelling and don't change the state.
Red Hat bug: https://bugzilla.redhat.com/show_bug.cgi?id=1608649
Fixes: b23c2ade25
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190219195928.12289-1-dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Switch the announcements to using the new announce timer.
Move the code that does it to announce.c rather than savevm
because it really has nothing to do with the actual migration.
Migration starts the announce from bh's and so they're all
in the main thread/bql, and so there's never any racing with
the timers themselves.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Add migration parameters that control RARP/GARP announcement timeouts.
Based on earlier patches by myself and
Vladislav Yasevich <vyasevic@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The 'announce timer' will be used by migration, and explicit
requests for qemu to perform network announces.
Based on the work by Germano Veit Michel <germano@redhat.com>
and Vlad Yasevich <vyasevic@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Use new qemu_iovec_init_buf() instead of
qemu_iovec_init_external( ... , 1), which simplifies the code.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20190218140926.333779-14-vsementsov@virtuozzo.com
Message-Id: <20190218140926.333779-14-vsementsov@virtuozzo.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
It introduces a new statistic, pages-per-second, as bandwidth or mbps is
not enough to measure the performance of posting pages out as we have
compression, xbzrle, which can significantly reduce the amount of the
data size, instead, pages-per-second is the one we want
Signed-off-by: Xiao Guangrong <xiaoguangrong@tencent.com>
Message-Id: <20190111063732.10484-2-xiaoguangrong@tencent.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
With typo's Eric spotted fixed
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20181114133139.27346-1-marcandre.lureau@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Unregister the fd handler before we destroy the channel,
otherwise we've got a race where we might land in the
fd handler just as we're closing the device.
(The race is quite data dependent, you just have to have
the right set of devices for it to trigger).
Corresponds to RH bz: https://bugzilla.redhat.com/show_bug.cgi?id=1666601
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190122173111.29821-1-dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
In the current code, if process_incoming_migration_co() fails we do
the same error handing: set the error state, close the source file,
do the cleanup for multifd, and then exit(EXIT_FAILURE). To make the
code clearer, add a "goto fail" to unify the error handling.
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Fei Li <fli@suse.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190113140849.38339-6-lifei1214@126.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Call postcopy_ram_incoming_cleanup() to do the cleanup when
postcopy_ram_enable_notify fails. Besides, report the error
message when qemu_ram_foreach_migratable_block() fails.
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Fei Li <fli@suse.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190113140849.38339-5-lifei1214@126.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
multifd_save_cleanup() takes an Error ** argument and returns an
error code even though it can't actually fail. Its callers
dutifully check for failure. Remove the useless argument and return
value, and simplify the callers.
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Fei Li <fli@suse.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20190113140849.38339-4-lifei1214@126.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
In our current code, when multifd is used during migration, if there
is an error before the destination receives all new channels, the
source keeps running, however the destination does not exit but keeps
waiting until the source is killed deliberately.
Fix this by dumping the specific error and let users decide whether
to quit from the destination side when failing to receive packet via
some channel. And update the comment for multifd_recv_new_channel().
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Fei Li <fli@suse.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-Id: <20190113140849.38339-3-lifei1214@126.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
In some cases it may be helpful to modify state before saving it for
migration, and then modify the state back after it has been saved. The
existing pre_save function provides half of this functionality. This
patch adds a post_save function to provide the second half.
Signed-off-by: Aaron Lindsay <aclindsa@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-id: 20181211151945.29137-2-aaron@os.amperecomputing.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
GCC 8 introduced the -Wstringop-overflow, which detect buffer overflow
by string-modifying functions declared in <string.h>, such strncpy(),
used in global_state_store_running().
GCC indeed found an incorrect use of strlen(), because this array
is loaded by VMSTATE_BUFFER(runstate, GlobalState) then parsed
using qapi_enum_parse which does not get the buffer length.
Use strnlen() which returns sizeof(s->runstate) if the array is not
NUL-terminated, assert the size is within range, and enforce the array
to be NUL-terminated to avoid an overflow in qapi_enum_parse().
This fixes:
CC migration/global_state.o
qemu/migration/global_state.c: In function 'global_state_pre_save':
qemu/migration/global_state.c:109:15: error: 'strlen' argument 1 declared attribute 'nonstring' [-Werror=stringop-overflow=]
s->size = strlen((char *)s->runstate) + 1;
^~~~~~~~~~~~~~~~~~~~~~~~~~~
qemu/migration/global_state.c:24:13: note: argument 'runstate' declared here
uint8_t runstate[100] QEMU_NONSTRING;
^~~~~~~~
cc1: all warnings being treated as errors
make: *** [qemu/rules.mak:69: migration/global_state.o] Error 1
Suggested-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
GCC 8 added a -Wstringop-truncation warning:
The -Wstringop-truncation warning added in GCC 8.0 via r254630 for
bug 81117 is specifically intended to highlight likely unintended
uses of the strncpy function that truncate the terminating NUL
character from the source string.
This new warning leads to compilation failures:
CC migration/global_state.o
qemu/migration/global_state.c: In function 'global_state_store_running':
qemu/migration/global_state.c:45:5: error: 'strncpy' specified bound 100 equals destination size [-Werror=stringop-truncation]
strncpy((char *)global_state.runstate, state, sizeof(global_state.runstate));
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
make: *** [qemu/rules.mak:69: migration/global_state.o] Error 1
Adding an assert is enough to silence GCC.
(alternatively, we could hard-code "running")
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
[PMD: More verbose commit message]
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Most list head structs need not be given a name. In most cases the
name is given just in case one is going to use QTAILQ_LAST, QTAILQ_PREV
or reverse iteration, but this does not apply to lists of other kinds,
and even for QTAILQ in practice this is only rarely needed. In addition,
we will soon reimplement those macros completely so that they do not
need a name for the head struct. So clean up everything, not giving a
name except in the rare case where it is necessary.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The qmp/hmp command 'system_wakeup' is simply a direct call to
'qemu_system_wakeup_request' from vl.c. This function verifies if
runstate is SUSPENDED and if the wake up reason is valid before
proceeding. However, no error or warning is thrown if any of those
pre-requirements isn't met. There is no way for the caller to
differentiate between a successful wakeup or an error state caused
when trying to wake up a guest that wasn't suspended.
This means that system_wakeup is silently failing, which can be
considered a bug. Adding error handling isn't an API break in this
case - applications that didn't check the result will remain broken,
the ones that check it will have a chance to deal with it.
Adding to that, the commit before previous created a new QMP API called
query-current-machine, with a new flag called wakeup-suspend-support,
that indicates if the guest has the capability of waking up from suspended
state. Although such guest will never reach SUSPENDED state and erroring
it out in this scenario would suffice, it is more informative for the user
to differentiate between a failure because the guest isn't suspended versus
a failure because the guest does not have support for wake up at all.
All this considered, this patch changes qmp_system_wakeup to check if
the guest is capable of waking up from suspend, and if it is suspended.
After this patch, this is the output of system_wakeup in a guest that
does not have wake-up from suspend support (ppc64):
(qemu) system_wakeup
wake-up from suspend is not supported by this guest
(qemu)
And this is the output of system_wakeup in a x86 guest that has the
support but isn't suspended:
(qemu) system_wakeup
Unable to wake up: guest is not in suspended state
(qemu)
Reported-by: Balamuruhan S <bala24@linux.vnet.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20181205194701.17836-4-danielhb413@gmail.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Add #if defined(CONFIG_REPLICATION) in generated code, and adjust the
code accordingly.
Made conditional:
* xen-set-replication, query-xen-replication-status,
xen-colo-do-checkpoint
Before the patch, we first register the commands unconditionally in
generated code (requires a stub), then conditionally unregister in
qmp_unregister_commands_hack().
Afterwards, we register only when CONFIG_REPLICATION. The command
fails exactly the same, with CommandNotFound.
Improvement, because now query-qmp-schema is accurate, and we're one
step closer to killing qmp_unregister_commands_hack().
* enum BlockdevDriver value "replication" in command blockdev-add
* BlockdevOptions variant @replication
and related structures.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20181213123724.4866-23-marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Because they are supposed to remain const.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20181114132931.22624-1-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There is really no difference between live migration and savevm, except
that savevm does not require bdrv_invalidate_cache to be implemented
by all disks. However, it is unlikely that savevm is used with anything
except qcow2 disks, so the penalty is small and worth the improvement
in catching bad usage of savevm.
Only one place was taking care of savevm when adding a migration blocker,
and it can be removed.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Current COLO mode(independent disk mode) need replication module work
together. Suggested by Dr. David Alan Gilbert <dgilbert@redhat.com>.
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Message-Id: <20181114190912.7242-1-chen.zhang@intel.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This compilation issue will occur when user use --disable-replication
to config Qemu.
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Zhang Chen <zhangckid@gmail.com>
Message-Id: <20181101021226.6353-1-zhangckid@gmail.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
During an active background migration, snapshot will trigger a
segmentfault. As snapshot clears the "current_migration" struct
and updates "to_dst_file" before it finds out that there is a
migration task, Migration accesses the null pointer in
"current_migration" struct and qemu crashes eventually.
Signed-off-by: Jia Lina <jialina01@baidu.com>
Signed-off-by: Chai Wen <chaiwen@baidu.com>
Signed-off-by: Zhang Yu <zhangyu31@baidu.com>
Message-Id: <20181026083620.10172-1-jialina01@baidu.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This patch aims to bring the following behavior:
1. We don't load bitmaps, when started in inactive mode. It's the case
of incoming migration. In this case we wait for bitmaps migration
through migration channel (if 'dirty-bitmaps' capability is enabled) or
for invalidation (to load bitmaps from the image).
2. We don't remove persistent bitmaps on inactivation. Instead, we only
remove bitmaps after storing. This is the only way to restore bitmaps,
if we decided to resume source after [failed] migration with
'dirty-bitmaps' capability enabled (which means, that bitmaps were not
stored).
3. We load bitmaps on open and any invalidation, it's ok for all cases:
- normal open
- migration target invalidation with dirty-bitmaps capability
(bitmaps are migrating through migration channel, the are not
stored, so they should have IN_USE flag set and will be skipped
when loading. However, it would fail if bitmaps are read-only[1])
- migration target invalidation without dirty-bitmaps capability
(normal load of the bitmaps, if migrated with shared storage)
- source invalidation with dirty-bitmaps capability
(skip because IN_USE)
- source invalidation without dirty-bitmaps capability
(bitmaps were dropped, reload them)
[1]: to accurately handle this, migration of read-only bitmaps is
explicitly forbidden in this patch.
New mechanism for not storing bitmaps when migrate with dirty-bitmaps
capability is introduced: migration filed in BdrvDirtyBitmap.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Instead of both frozen and qmp_locked checks, wrap it into one check.
frozen implies the bitmap is split in two (for backup), and shouldn't
be modified. qmp_locked implies it's being used by another operation,
like being exported over NBD. In both cases it means we shouldn't allow
the user to modify it in any meaningful way.
Replace any usages where we check both frozen and qmp_locked with the
new check.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20181002230218.13949-2-jsnow@redhat.com
[w/edits Suggested-By: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>]
Signed-off-by: John Snow <jsnow@redhat.com>
-----BEGIN PGP SIGNATURE-----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=kPZX
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/armbru/tags/pull-error-2018-10-22' into staging
Error reporting patches for 2018-10-22
# gpg: Signature made Mon 22 Oct 2018 13:20:23 BST
# gpg: using RSA key 3870B400EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>"
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* remotes/armbru/tags/pull-error-2018-10-22: (40 commits)
error: Drop bogus "use error_setg() instead" admonitions
vpc: Fail open on bad header checksum
block: Clean up bdrv_img_create()'s error reporting
vl: Simplify call of parse_name()
vl: Fix exit status for -drive format=help
blockdev: Convert drive_new() to Error
vl: Assert drive_new() does not fail in default_drive()
fsdev: Clean up error reporting in qemu_fsdev_add()
spice: Clean up error reporting in add_channel()
tpm: Clean up error reporting in tpm_init_tpmdev()
numa: Clean up error reporting in parse_numa()
vnc: Clean up error reporting in vnc_init_func()
ui: Convert vnc_display_init(), init_keyboard_layout() to Error
ui/keymaps: Fix handling of erroneous include files
vl: Clean up error reporting in device_init_func()
vl: Clean up error reporting in parse_fw_cfg()
vl: Clean up error reporting in mon_init_func()
vl: Clean up error reporting in machine_set_property()
vl: Clean up error reporting in chardev_init_func()
qom: Clean up error reporting in user_creatable_add_opts_foreach()
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Calling error_report() in a function that takes an Error ** argument
is suspicious. save_snapshot() and load_snapshot() do that, and then
fail without setting an error. Wrong. The HMP commands survive this
unscathed, since hmp_handle_error() does nothing when no error has
been set. Callers main() (on behalf of -loadvm) and
replay_vmstate_init() crash, but I'm not sure the error is possible
there.
Screwed up when commit 377b21ccea (v2.12.0) added incorrect error
handling right next to correct examples. Fix by calling error_setg()
instead of error_report().
Fixes: 377b21ccea
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20181017082702.5581-13-armbru@redhat.com>
From include/qapi/error.h:
* Pass an existing error to the caller with the message modified:
* error_propagate(errp, err);
* error_prepend(errp, "Could not frobnicate '%s': ", name);
Fei Li pointed out that doing error_propagate() first doesn't work
well when @errp is &error_fatal or &error_abort: the error_prepend()
is never reached.
Since I doubt fixing the documentation will stop people from getting
it wrong, introduce error_propagate_prepend(), in the hope that it
lures people away from using its constituents in the wrong order.
Update the instructions in error.h accordingly.
Convert existing error_prepend() next to error_propagate to
error_propagate_prepend(). If any of these get reached with
&error_fatal or &error_abort, the error messages improve. I didn't
check whether that's the case anywhere.
Cc: Fei Li <fli@suse.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20181017082702.5581-2-armbru@redhat.com>
COLO thread may sleep at qemu_sem_wait(&s->colo_checkpoint_sem),
while failover works begin, It's better to wakeup it to quick
the process.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Notify all net filters about the checkpoint and failover event.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Don't need to flush all VM's ram from cache, only
flush the dirty pages since last checkpoint
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Zhang Chen <zhangckid@gmail.com>
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
There are several stages during loadvm/savevm process. In different stage,
migration incoming processes different types of sections.
We want to control these stages more accuracy, it will benefit COLO
performance, we don't have to save type of QEMU_VM_SECTION_START
sections everytime while do checkpoint, besides, we want to separate
the process of saving/loading memory and devices state.
So we add three new helper functions: qemu_load_device_state() and
qemu_savevm_live_state() to achieve different process during migration.
Besides, we make qemu_loadvm_state_main() and qemu_save_device_state()
public, and simplify the codes of qemu_save_device_state() by calling the
wrapper qemu_savevm_state_header().
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Zhang Chen <zhangckid@gmail.com>
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Libvirt or other high level software can use this command query colo status.
You can test this command like that:
{'execute':'query-colo-status'}
Signed-off-by: Zhang Chen <zhangckid@gmail.com>
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Suggested by Markus Armbruster rename COLO unknown mode to none mode.
Signed-off-by: Zhang Chen <zhangckid@gmail.com>
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
If some errors happen during VM's COLO FT stage, it's important to
notify the users of this event. Together with 'x-colo-lost-heartbeat',
Users can intervene in COLO's failover work immediately.
If users don't want to get involved in COLO's failover verdict,
it is still necessary to notify users that we exited COLO mode.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Zhang Chen <zhangckid@gmail.com>
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
During the time of VM's running, PVM may dirty some pages, we will transfer
PVM's dirty pages to SVM and store them into SVM's RAM cache at next checkpoint
time. So, the content of SVM's RAM cache will always be same with PVM's memory
after checkpoint.
Instead of flushing all content of PVM's RAM cache into SVM's MEMORY,
we do this in a more efficient way:
Only flush any page that dirtied by PVM since last checkpoint.
In this way, we can ensure SVM's memory same with PVM's.
Besides, we must ensure flush RAM cache before load device state.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
We record the address of the dirty pages that received,
it will help flushing pages that cached into SVM.
Here, it is a trick, we record dirty pages by re-using migration
dirty bitmap. In the later patch, we will start the dirty log
for SVM, just like migration, in this way, we can record both
the dirty pages caused by PVM and SVM, we only flush those dirty
pages from RAM cache while do checkpoint.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Zhang Chen <zhangckid@gmail.com>
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
We should not load PVM's state directly into SVM, because there maybe some
errors happen when SVM is receving data, which will break SVM.
We need to ensure receving all data before load the state into SVM. We use
an extra memory to cache these data (PVM's ram). The ram cache in secondary side
is initially the same as SVM/PVM's memory. And in the process of checkpoint,
we cache the dirty pages of PVM into this ram cache firstly, so this ram cache
always the same as PVM's memory at every checkpoint, then we flush this cached ram
to SVM after we receive all PVM's state.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Zhang Chen <zhangckid@gmail.com>
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
We need to know if migration is going into COLO state for
incoming side before start normal migration.
Instead by using the VMStateDescription to send colo_state
from source side to destination side, we use MIG_CMD_ENABLE_COLO
to indicate whether COLO is enabled or not.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Zhang Chen <zhangckid@gmail.com>
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Make sure master start block replication after slave's block
replication started.
Besides, we need to activate VM's blocks before goes into
COLO state.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Zhang Chen <zhangckid@gmail.com>
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
For COLO FT, both the PVM and SVM run at the same time,
only sync the state while it needs.
So here, let SVM runs while not doing checkpoint, change
DEFAULT_MIGRATE_X_CHECKPOINT_DELAY to 200*100.
Besides, we forgot to release colo_checkpoint_semd and
colo_delay_timer, fix them here.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Zhang Chen <zhangckid@gmail.com>
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
POSTCOPY_NOTIFY_INBOUND_END handlers will remove userfault fds
from the postcopy_remote_fds array which could be still in
use by the fault thread. Let's stop the thread before
notification to avoid possible accessing wrong memory.
Fixes: 46343570c0 ("vhost+postcopy: Wire up POSTCOPY_END notify")
Cc: qemu-stable@nongnu.org
Signed-off-by: Ilya Maximets <i.maximets@samsung.com>
Message-Id: <20181008160536.6332-2-i.maximets@samsung.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Taking the address of a field in a packed struct is a bad idea, because
it might not be actually aligned enough for that pointer type (and
thus cause a crash on dereference on some host architectures). Newer
versions of clang warn about this:
migration/ram.c:651:19: warning: taking address of packed member 'magic' of class or structure 'MultiFDInit_t' may result in an unaligned pointer value [-Waddress-of-packed-member]
migration/ram.c:652:19: warning: taking address of packed member 'version' of class or structure 'MultiFDInit_t' may result in an unaligned pointer value [-Waddress-of-packed-member]
migration/ram.c:737:19: warning: taking address of packed member 'magic' of class or structure 'MultiFDPacket_t' may result in an unaligned pointer value [-Waddress-of-packed-member]
migration/ram.c:745:19: warning: taking address of packed member 'version' of class or structure 'MultiFDPacket_t' may result in an unaligned pointer value [-Waddress-of-packed-member]
migration/ram.c:755:19: warning: taking address of packed member 'size' of class or structure 'MultiFDPacket_t' may result in an unaligned pointer value [-Waddress-of-packed-member]
Avoid the bug by not using the "modify in place" byteswapping
functions.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20180925161924.7832-1-peter.maydell@linaro.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Add judgement in compress_threads_save_cleanup() to check whether the
static CompressParam *comp_param has been allocated. If not, just
return; or else segmentation fault will occur when using the NULL
comp_param's parameters. One test case can reproduce this is: set
the compression on and migrate to a wrong nonexistent host IP address.
Our current code does not judge before handling comp_param[idx]'s quit
and cond that whether they have been initialized. If not initialized,
"qemu_mutex_lock_impl: Assertion `mutex->initialized' failed." will
occur. Fix this by squashing the terminate_compression_threads() into
compress_threads_save_cleanup() and employing the existing judgement
condition. One test case can reproduce this error is: set the
compression on and fail to fully setup the default eight compression
thread in compress_threads_save_setup().
Signed-off-by: Fei Li <fli@suse.com>
Message-Id: <20180925091440.18910-1-fli@suse.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Spotted by ASAN while running:
$ tests/migration-test -p /x86_64/migration/postcopy/recovery
=================================================================
==18034==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 33864 byte(s) in 1 object(s) allocated from:
#0 0x7f3da7f31e50 in calloc (/lib64/libasan.so.5+0xeee50)
#1 0x7f3da644441d in g_malloc0 (/lib64/libglib-2.0.so.0+0x5241d)
#2 0x55af9db15440 in qemu_fopen_channel_input /home/elmarco/src/qemu/migration/qemu-file-channel.c:183
#3 0x55af9db15413 in channel_get_output_return_path /home/elmarco/src/qemu/migration/qemu-file-channel.c:159
#4 0x55af9db0d4ac in qemu_file_get_return_path /home/elmarco/src/qemu/migration/qemu-file.c:78
#5 0x55af9dad5e4f in open_return_path_on_source /home/elmarco/src/qemu/migration/migration.c:2295
#6 0x55af9dadb3bf in migrate_fd_connect /home/elmarco/src/qemu/migration/migration.c:3111
#7 0x55af9dae1bf3 in migration_channel_connect /home/elmarco/src/qemu/migration/channel.c:91
#8 0x55af9daddeca in socket_outgoing_migration /home/elmarco/src/qemu/migration/socket.c:108
#9 0x55af9e13d3db in qio_task_complete /home/elmarco/src/qemu/io/task.c:158
#10 0x55af9e13ca03 in qio_task_thread_result /home/elmarco/src/qemu/io/task.c:89
#11 0x7f3da643b1ca in g_idle_dispatch gmain.c:5535
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20180925092245.29565-1-marcandre.lureau@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
There's a couple of error paths in qemu_loadvm_state
which happen early on but after we've initialised the
load state; that needs to be cleaned up otherwise
we can hit asserts if the state gets reinitialised later.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20180914170430.54271-3-dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Clear have_listen_thread when we exit the thread.
The fallout from this was that various things thought there was
an ongoing postcopy after the postcopy had finished.
The case that failed was postcopy->savevm->loadvm.
This corresponds to RH bug https://bugzilla.redhat.com/show_bug.cgi?id=1608765
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20180914170430.54271-2-dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
It avoids to touch compression locks if xbzrle and compression
are both enabled
Signed-off-by: Xiao Guangrong <xiaoguangrong@tencent.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20180906070101.27280-4-xiaoguangrong@tencent.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Currently, it includes:
pages: amount of pages compressed and transferred to the target VM
busy: amount of count that no free thread to compress data
busy-rate: rate of thread busy
compressed-size: amount of bytes after compression
compression-rate: rate of compressed size
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Xiao Guangrong <xiaoguangrong@tencent.com>
Message-Id: <20180906070101.27280-3-xiaoguangrong@tencent.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
flush_compressed_data() needs to wait all compression threads to
finish their work, after that all threads are free until the
migration feeds new request to them, reducing its call can improve
the throughput and use CPU resource more effectively
We do not need to flush all threads at the end of iteration, the
data can be kept locally until the memory block is changed or
memory migration starts over in that case we will meet a dirtied
page which may still exists in compression threads's ring
Signed-off-by: Xiao Guangrong <xiaoguangrong@tencent.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20180906070101.27280-2-xiaoguangrong@tencent.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This patch adds a small hint for the failure case of the load snapshot
process. It may be useful for users to remember that the VM
configuration has changed between the save and load processes.
(qemu) loadvm vm-20180903083641
Unknown savevm section or instance 'cpu_common' 4.
Make sure that your current VM setup matches your saved VM setup, including any hotplugged devices
Error -22 while loading VM state
(qemu) device_add host-spapr-cpu-core,core-id=4
(qemu) loadvm vm-20180903083641
(qemu) c
(qemu) info status
VM status: running
It also exits Qemu if the snapshot cannot be loaded before reaching the
main loop (-loadvm in the command line).
$ qemu-system-ppc64 ... -loadvm vm-20180903083641
qemu-system-ppc64: Unknown savevm section or instance 'cpu_common' 4.
Make sure that your current VM setup matches your saved VM setup, including any hotplugged devices
qemu-system-ppc64: Error -22 while loading VM state
$
Signed-off-by: Jose Ricardo Ziviani <joserz@linux.ibm.com>
Message-Id: <20180903162613.15877-1-joserz@linux.ibm.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
ram_find_and_save_block() can return negative if any error hanppens,
however, it is completely ignored in current code
Signed-off-by: Xiao Guangrong <xiaoguangrong@tencent.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20180903092644.25812-5-xiaoguangrong@tencent.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
As Peter pointed out:
| - xbzrle_counters.cache_miss is done in save_xbzrle_page(), so it's
| per-guest-page granularity
|
| - RAMState.iterations is done for each ram_find_and_save_block(), so
| it's per-host-page granularity
|
| An example is that when we migrate a 2M huge page in the guest, we
| will only increase the RAMState.iterations by 1 (since
| ram_find_and_save_block() will be called once), but we might increase
| xbzrle_counters.cache_miss for 2M/4K=512 times (we'll call
| save_xbzrle_page() that many times) if all the pages got cache miss.
| Then IMHO the cache miss rate will be 512/1=51200% (while it should
| actually be just 100% cache miss).
And he also suggested as xbzrle_counters.cache_miss_rate is the only
user of rs->iterations we can adapt it to count target guest page
numbers
After that, rename 'iterations' to 'target_page_count' to better reflect
its meaning
Suggested-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Xiao Guangrong <xiaoguangrong@tencent.com>
Message-Id: <20180903092644.25812-3-xiaoguangrong@tencent.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Clang correctly errors out moaning that rdma_return_path
is used uninitialised in the earlier error paths.
Make it NULL so that the error path ignores it.
Fixes: 55cc1b5937
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reported-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20180830173657.22939-1-dgilbert@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The generated qapi_event_send_FOO() take an Error ** argument. They
can't actually fail, because all they do with the argument is passing it
to functions that can't fail: the QObject output visitor, and the
@qmp_emit callback, which is either monitor_qapi_event_queue() or
event_test_emit().
Drop the argument, and pass &error_abort to the QObject output visitor
and @qmp_emit instead.
Suggested-by: Eric Blake <eblake@redhat.com>
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180815133747.25032-4-peterx@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Commit message rewritten, update to qapi-code-gen.txt corrected]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
While the qemu_balloon_inhibit() interface appears rather general purpose,
postcopy uses it in a last-caller-wins approach with no guarantee of balanced
inhibits and de-inhibits. Wrap postcopy's usage of the inhibitor to give it
one vote overall, using the same last-caller-wins approach as previously
implemented at the balloon level.
Fixes: 01ccbec7bd ("balloon: Allow multiple inhibit users")
Reported-by: Christian Borntraeger <borntraeger@de.ibm.com>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Try to hold src_page_req_mutex only if the queue is not
empty
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Xiao Guangrong <xiaoguangrong@tencent.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Detecting zero page is not a light work, moving it to the thread to
speed the main thread up, btw, handling ram_release_pages() for the
zero page is moved to the thread as well
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Xiao Guangrong <xiaoguangrong@tencent.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
It is not used and cleans the code up a little
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Xiao Guangrong <xiaoguangrong@tencent.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
It will be used by the compression threads
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Xiao Guangrong <xiaoguangrong@tencent.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The compressed page is not normal page
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Xiao Guangrong <xiaoguangrong@tencent.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Instead of putting the main thread to sleep state to wait for
free compression thread, we can directly post it out as normal
page that reduces the latency and uses CPUs more efficiently
A parameter, compress-wait-thread, is introduced, it can be
enabled if the user really wants the old behavior
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Xiao Guangrong <xiaoguangrong@tencent.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The destination qemu only poll the comp_channel->fd in
qemu_rdma_wait_comp_channel. But when source qemu disconnnect
the rdma connection, the destination qemu should be notified.
Signed-off-by: Lidong Chen <lidongchen@tencent.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Because RDMA QIOChannel not implement shutdown function,
If the to_dst_file was set error, the return path thread
will wait forever. and the migration thread will wait
return path thread exit.
the backtrace of return path thread is:
(gdb) bt
#0 0x00007f372a76bb0f in ppoll () from /lib64/libc.so.6
#1 0x000000000071dc24 in qemu_poll_ns (fds=0x7ef7091d0580, nfds=2, timeout=100000000)
at qemu-timer.c:325
#2 0x00000000006b2fba in qemu_rdma_wait_comp_channel (rdma=0xd424000)
at migration/rdma.c:1501
#3 0x00000000006b3191 in qemu_rdma_block_for_wrid (rdma=0xd424000, wrid_requested=4000,
byte_len=0x7ef7091d0640) at migration/rdma.c:1580
#4 0x00000000006b3638 in qemu_rdma_exchange_get_response (rdma=0xd424000,
head=0x7ef7091d0720, expecting=3, idx=0) at migration/rdma.c:1726
#5 0x00000000006b3ad6 in qemu_rdma_exchange_recv (rdma=0xd424000, head=0x7ef7091d0720,
expecting=3) at migration/rdma.c:1903
#6 0x00000000006b5d03 in qemu_rdma_get_buffer (opaque=0x6a57dc0, buf=0x5c80030 "", pos=8,
size=32768) at migration/rdma.c:2714
#7 0x00000000006a9635 in qemu_fill_buffer (f=0x5c80000) at migration/qemu-file.c:232
#8 0x00000000006a9ecd in qemu_peek_byte (f=0x5c80000, offset=0)
at migration/qemu-file.c:502
#9 0x00000000006a9f1f in qemu_get_byte (f=0x5c80000) at migration/qemu-file.c:515
#10 0x00000000006aa162 in qemu_get_be16 (f=0x5c80000) at migration/qemu-file.c:591
#11 0x00000000006a46d3 in source_return_path_thread (
opaque=0xd826a0 <current_migration.37100>) at migration/migration.c:1331
#12 0x00007f372aa49e25 in start_thread () from /lib64/libpthread.so.0
#13 0x00007f372a77635d in clone () from /lib64/libc.so.6
the backtrace of migration thread is:
(gdb) bt
#0 0x00007f372aa4af57 in pthread_join () from /lib64/libpthread.so.0
#1 0x00000000007d5711 in qemu_thread_join (thread=0xd826f8 <current_migration.37100+88>)
at util/qemu-thread-posix.c:504
#2 0x00000000006a4bc5 in await_return_path_close_on_source (
ms=0xd826a0 <current_migration.37100>) at migration/migration.c:1460
#3 0x00000000006a53e4 in migration_completion (s=0xd826a0 <current_migration.37100>,
current_active_state=4, old_vm_running=0x7ef7089cf976, start_time=0x7ef7089cf980)
at migration/migration.c:1695
#4 0x00000000006a5c54 in migration_thread (opaque=0xd826a0 <current_migration.37100>)
at migration/migration.c:1837
#5 0x00007f372aa49e25 in start_thread () from /lib64/libpthread.so.0
#6 0x00007f372a77635d in clone () from /lib64/libc.so.6
Signed-off-by: Lidong Chen <lidongchen@tencent.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
If the peer qemu is crashed, the qemu_rdma_wait_comp_channel function
maybe loop forever. so we should also poll the cm event fd, and when
receive RDMA_CM_EVENT_DISCONNECTED and RDMA_CM_EVENT_DEVICE_REMOVAL,
we consider some error happened.
Signed-off-by: Lidong Chen <lidongchen@tencent.com>
Signed-off-by: Gal Shachaf <galsha@mellanox.com>
Signed-off-by: Aviad Yehezkel <aviadye@mellanox.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
when qio_channel_read return QIO_CHANNEL_ERR_BLOCK, the source qemu crash.
The backtrace is:
(gdb) bt
#0 0x00007fb20aba91d7 in raise () from /lib64/libc.so.6
#1 0x00007fb20abaa8c8 in abort () from /lib64/libc.so.6
#2 0x00007fb20aba2146 in __assert_fail_base () from /lib64/libc.so.6
#3 0x00007fb20aba21f2 in __assert_fail () from /lib64/libc.so.6
#4 0x00000000008dba2d in qio_channel_yield (ioc=0x22f9e20, condition=G_IO_IN) at io/channel.c:460
#5 0x00000000007a870b in channel_get_buffer (opaque=0x22f9e20, buf=0x3d54038 "", pos=0, size=32768)
at migration/qemu-file-channel.c:83
#6 0x00000000007a70f6 in qemu_fill_buffer (f=0x3d54000) at migration/qemu-file.c:299
#7 0x00000000007a79d0 in qemu_peek_byte (f=0x3d54000, offset=0) at migration/qemu-file.c:562
#8 0x00000000007a7a22 in qemu_get_byte (f=0x3d54000) at migration/qemu-file.c:575
#9 0x00000000007a7c46 in qemu_get_be16 (f=0x3d54000) at migration/qemu-file.c:647
#10 0x0000000000796db7 in source_return_path_thread (opaque=0x2242280) at migration/migration.c:1794
#11 0x00000000009428fa in qemu_thread_start (args=0x3e58420) at util/qemu-thread-posix.c:504
#12 0x00007fb20af3ddc5 in start_thread () from /lib64/libpthread.so.0
#13 0x00007fb20ac6b74d in clone () from /lib64/libc.so.6
This patch fixed by invoke qio_channel_yield only when qemu_in_coroutine().
Signed-off-by: Lidong Chen <lidongchen@tencent.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
if qio_channel_rdma_readv return QIO_CHANNEL_ERR_BLOCK, the destination qemu
crash.
The backtrace is:
(gdb) bt
#0 0x0000000000000000 in ?? ()
#1 0x00000000008db50e in qio_channel_set_aio_fd_handler (ioc=0x38111e0, ctx=0x3726080,
io_read=0x8db841 <qio_channel_restart_read>, io_write=0x0, opaque=0x38111e0) at io/channel.c:
#2 0x00000000008db952 in qio_channel_set_aio_fd_handlers (ioc=0x38111e0) at io/channel.c:438
#3 0x00000000008dbab4 in qio_channel_yield (ioc=0x38111e0, condition=G_IO_IN) at io/channel.c:47
#4 0x00000000007a870b in channel_get_buffer (opaque=0x38111e0, buf=0x440c038 "", pos=0, size=327
at migration/qemu-file-channel.c:83
#5 0x00000000007a70f6 in qemu_fill_buffer (f=0x440c000) at migration/qemu-file.c:299
#6 0x00000000007a79d0 in qemu_peek_byte (f=0x440c000, offset=0) at migration/qemu-file.c:562
#7 0x00000000007a7a22 in qemu_get_byte (f=0x440c000) at migration/qemu-file.c:575
#8 0x00000000007a7c78 in qemu_get_be32 (f=0x440c000) at migration/qemu-file.c:655
#9 0x00000000007a0508 in qemu_loadvm_state (f=0x440c000) at migration/savevm.c:2126
#10 0x0000000000794141 in process_incoming_migration_co (opaque=0x0) at migration/migration.c:366
#11 0x000000000095c598 in coroutine_trampoline (i0=84033984, i1=0) at util/coroutine-ucontext.c:1
#12 0x00007f9c0db56d40 in ?? () from /lib64/libc.so.6
#13 0x00007f96fe858760 in ?? ()
#14 0x0000000000000000 in ?? ()
RDMA QIOChannel not implement io_set_aio_fd_handler. so
qio_channel_set_aio_fd_handler will access NULL pointer.
Signed-off-by: Lidong Chen <lidongchen@tencent.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
During incoming postcopy, the destination qemu will invoke
qemu_rdma_wait_comp_channel in a seprate thread. So does not use rdma
yield, and poll the completion channel fd instead.
Signed-off-by: Lidong Chen <lidongchen@tencent.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
This patch implements bi-directional RDMA QIOChannel. Because different
threads may access RDMAQIOChannel currently, this patch use RCU to protect it.
Signed-off-by: Lidong Chen <lidongchen@tencent.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
If start a RDMA migration with postcopy enabled, the source qemu
establish a dedicated connection for return path.
Signed-off-by: Lidong Chen <lidongchen@tencent.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
RDMA WRITE operations are performed with no notification to the destination
qemu, then the destination qemu can not wakeup. This patch disable RDMA WRITE
after postcopy started.
Signed-off-by: Lidong Chen <lidongchen@tencent.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Currently, the default maximum CPU throttle for migration is
99(CPU_THROTTLE_PCT_MAX). This is too big and can make a remarkable
performance effect for the guest. We see a lot of packets latency
exceed 500ms when the CPU_THROTTLE_PCT_MAX reached. This patch set
adds a new max-cpu-throttle parameter to limit the CPU throttle.
Signed-off-by: Li Qiang <liq3ea@gmail.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Currently the vmstate subsection handling code treats a subsection
with no 'needed' function pointer as if it were the subsection
list terminator, so the subsection is never transferred and nor
is any subsection following it in the list.
Handle NULL 'needed' function pointers in subsections in the same
way that we do for top level VMStateDescription structures:
treat the subsection as always being needed.
This doesn't change behaviour for the current set of devices
in the tree, because all subsections declare a 'needed' function.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Because we need to make sure the pmem kind memory data is synced
after migration, we choose to call pmem_persist() when the migration
finish. This will make sure the data of pmem is safe and will not
lose if power is off.
Signed-off-by: Junyan He <junyan.he@intel.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The nvdimm kind memory does not support post copy now.
We disable post copy if we have nvdimm memory and print some
log hint to user.
Signed-off-by: Junyan He <junyan.he@intel.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
migrate_fd_connect duplicate initialize expected_downtime and cleanup_bh.
Signed-off-by: Lidong Chen <lidongchen@tencent.com>
Message-Id: <1532434585-14732-2-git-send-email-lidongchen@tencent.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Postcopy recovery won't work well with release-ram capability since
release-ram will drop the page buffer as long as the page is put into
the send buffer. So if there is a network failure happened, any page
buffers that have not yet reached the destination VM but have already
been sent from the source VM will be lost forever. Let's refuse the
client from resuming such a postcopy migration. Luckily release-ram was
designed to only be used when src and destination VMs are on the same
host, so it should be fine.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180723123305.24792-3-peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
We shouldn't update the received bitmap if we're the source VM. This
fixes a breakage when release-ram is enabled on postcopy.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180723123305.24792-2-peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
We've been getting the warning:
migration_iteration_finish: Unknown ending state 2
on a cancel.
I think that's originally due to 39b9e17905c; although
I've only seen the warning, I think that in some cases
that we could find the VM stays paused after a cancel where
it should restart.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20180719092257.12703-1-dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
I would guess it won't happen normally, but this should ease Coverity.
>>> CID 1394385: Integer handling issues (OVERFLOW_BEFORE_WIDEN)
>>> Potentially overflowing expression "pages->used * 8192U" with type "unsigned int" (32 bits, unsigned) is evaluated using 32-bit arithmetic, and then used in a context that expects an expression of type "uint64_t" (64 bits, unsigned).
854 transferred = pages->used * TARGET_PAGE_SIZE + p->packet_len;
Fixes: CID 1394385
CC: Juan Quintela <quintela@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180720034713.11711-1-peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
It was accidently added before MIG_CMD_PACKAGED so it might break
command compatibility when we run postcopy migration between old/new
QEMUs. Fix that up quickly before the QEMU 3.0 release.
Reported-by: Lukáš Doktor <ldoktor@redhat.com>
Suggested-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180710094424.30754-1-peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
These two states will be missing when doing "query-migrate" on
destination VM. Add these states so that we can get the query results
as expected.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180710091902.28780-5-peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The calculation on size of received bitmap is incorrect for postcopy
recovery. Here we wanted to let the size to cover all the valid bits in
the bitmap, we should use DIV_ROUND_UP() instead of a division.
For example, a RAMBlock with size=4K (which contains only one single 4K
page) will have nbits=1, then nbits/8=0, then the real bitmap won't be
sent to source at all.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180710091902.28780-4-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
We were checking against -EIO, assuming that it will cover all IO
failures. But actually it is not. One example is that in
qemu_loadvm_section_start_full() we can have tons of places that will
return -EINVAL even if the error is caused by IO failures on the
network.
Let's loosen the recovery check logic here to cover all the error cases
happened by removing the explicit check against -EIO. After all we
won't lose anything here if any other failure happened.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180710091902.28780-3-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Firstly, renaming the old matching_page_sizes variable to
matches_target_page_size, which suites more to what it did (it only
checks against target page size rather than multiple page sizes).
Meanwhile, simplify the check logic a bit, and enhance the comments.
Should have no functional change.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180710091902.28780-2-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This is the 2nd patch to unbreak postcopy recovery.
Let's unify the migration_incoming_process() call at a single place
rather than calling it in connection setup codes. This fixes a problem
that we will go into incoming migration procedure even if we are trying
to recovery from a paused postcopy migration.
Fixes: 36c2f8be2c ("migration: Delay start of migration main routines")
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180627132246.5576-5-peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The whole postcopy recovery logic was accidentally broken. We need to
fix it in two steps.
This is the first step that we should do the recovery when needed. It
was bypassed before after commit 36c2f8be2c.
Introduce postcopy_try_recovery() helper for the postcopy recovery
logic. Call it both in migration_fd_process_incoming() and
migration_ioc_process_incoming().
Fixes: 36c2f8be2c ("migration: Delay start of migration main routines")
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180627132246.5576-4-peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Move the call to migration_incoming_process() out of multifd code. It's
a bit strange that we can migration generic calls in multifd code.
Instead, let multifd_recv_new_channel() return a boolean showing whether
it's ready to continue the incoming migration.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180627132246.5576-3-peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Before this patch we firstly setup the postcopy-paused state then we
clean up the QEMUFile handles. That can be racy if there is a very fast
"migrate-recover" command running in parallel. Fix that up.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180627132246.5576-2-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Bitmap lock/unlock were added to bdrv_enable_dirty_bitmap in
8b1402ce80, but some places were not updated correspondingly, which
leads to trying to take this lock twice, which is dead-lock. Fix this.
Actually, iotest 199 (about dirty bitmap postcopy migration) is broken
now, and this fixes it.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20180625165745.25259-3-vsementsov@virtuozzo.com
Signed-off-by: John Snow <jsnow@redhat.com>
The way we determine if we can start the incoming migration was
changed to use migration_has_all_channels() in:
commit 428d89084c
Author: Juan Quintela <quintela@redhat.com>
Date: Mon Jul 24 13:06:25 2017 +0200
migration: Create migration_has_all_channels
This method in turn calls multifd_recv_all_channels_created()
which is hardcoded to always return 'true' when multifd is
not in use. This is a latent bug...
...activated in a following commit where that return result
ends up acting as the flag to indicate whether it is possible
to start processing the migration:
commit 36c2f8be2c
Author: Juan Quintela <quintela@redhat.com>
Date: Wed Mar 7 08:40:52 2018 +0100
migration: Delay start of migration main routines
This means that if channel initialization fails with normal
migration, it'll never notice and attempt to start the
incoming migration regardless and crash on a NULL pointer.
This can be seen, for example, if a client connects to a server
requiring TLS, but has an invalid x509 certificate:
qemu-system-x86_64: The certificate hasn't got a known issuer
qemu-system-x86_64: migration/migration.c:386: process_incoming_migration_co: Assertion `mis->from_src_file' failed.
#0 0x00007fffebd24f2b in raise () at /lib64/libc.so.6
#1 0x00007fffebd0f561 in abort () at /lib64/libc.so.6
#2 0x00007fffebd0f431 in _nl_load_domain.cold.0 () at /lib64/libc.so.6
#3 0x00007fffebd1d692 in () at /lib64/libc.so.6
#4 0x0000555555ad027e in process_incoming_migration_co (opaque=<optimized out>) at migration/migration.c:386
#5 0x0000555555c45e8b in coroutine_trampoline (i0=<optimized out>, i1=<optimized out>) at util/coroutine-ucontext.c:116
#6 0x00007fffebd3a6a0 in __start_context () at /lib64/libc.so.6
#7 0x0000000000000000 in ()
To handle the non-multifd case, we check whether mis->from_src_file
is non-NULL. With this in place, the migration server drops the
rejected client and stays around waiting for another, hopefully
valid, client to arrive.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20180619163552.18206-1-berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Not needed. Don't expose last_ram_page().
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180620202736.21399-1-david@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
We have to flush() the QEMUFile because now we sent really few data
through that channel.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
We know quit with shutdwon in the QIO.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
--
Add comment
Use shutdown() instead of unref()
We have three conditions here:
- channel fails -> error
- we have to quit: we close the channel and reads fails
- normal read that success, we are in bussiness
So forget the complications of waiting in a semaphore.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The function still don't use multifd, but we have simplified
ram_save_page, xbzrle and RDMA stuff is gone. We have added a new
counter.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
--
Add last_page parameter
Add commets for done and address
Remove multifd field, it is the same than normal pages
Merge next patch, now we send multiple pages at a time
Remove counter for multifd pages, it is identical to normal pages
Use iovec's instead of creating the equivalent.
Clear memory used by pages (dave)
Use g_new0(danp)
define MULTIFD_CONTINUE
now pages member is a pointer
Fix off-by-one in number of pages in one packet
Remove RAM_SAVE_FLAG_MULTIFD_PAGE
s/multifd_pages_t/MultiFDPages_t/
add comment explaining what it means
This will include how many bytes they are sent through multifd.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
We synchronize all threads each RAM_SAVE_FLAG_EOS. Bitmap
synchronizations don't happen inside a ram section, so we are safe
about two channels trying to overwrite the same memory.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
--
seq needs to be atomic now, will also be accessed from main thread.
Fix the if (true || ...) leftover
We are back to non-atomics
Either for quit, sync or packet, we first wake them.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
We want to know how many pages/packets each channel has sent. Add
counters for those.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
--
sort trace-events (dave)
Right now we use the "position" inside the QEMUFile, but things like
RDMA already do weird things to be able to maintain that counter
right, and multifd will have some similar problems.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
We used to include in this calculation the setup time, but that can be
quite big in rdma or multifd.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
We still don't put anything there.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
--
fix magic (dave)
check offset/ramblock (dave)
s/seq/packet_num/ and make it 64bit
We only create/destry the page list here. We will use it later.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Only one existing trace event uses a floating point type. Unfortunately
float and double cannot be supported since SystemTap does not have
floating point types.
Remove float and double from the whitelist and document this limitation.
Update the migrate_transferred trace event to use uint64_t instead of
double.
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Daniel P. Berrangé <berrange@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-id: 20180621150254.4922-1-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
expected_downtime value is not accurate with dirty_pages_rate * page_size,
using ram_bytes_remaining() would yeild it resonable.
consider to read the remaining ram just after having updated the dirty
pages count later migration_bitmap_sync_range() in migration_bitmap_sync()
and reuse the `remaining` field in ram_counters to hold ram_bytes_remaining()
for calculating expected_downtime.
Reported-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Balamuruhan S <bala24@linux.vnet.ibm.com>
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20180612085009.17594-2-bala24@linux.vnet.ibm.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Use the 'urgent request' mechanism added in the previous patch
for entries added to the postcopy request queue for RAM. Ignore
the rate limiting while we have requests.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20180613102642.23995-4-dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Rate limiting sleeps the migration thread for a while when it runs
out of bandwidth; but sometimes we want to wake up to get on with
something more urgent (like a postcopy request). Here we use
a semaphore with a timedwait instead of a simple sleep; Incrementing
the sempahore will wake it up sooner. Anything that consumes
these urgent events must decrement the sempahore.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20180613102642.23995-3-dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Limit the background transfer bandwidth during the postcopy
phase to the value set on this new parameter. The default, 0,
corresponds to the existing behaviour which is unlimited bandwidth.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20180613102642.23995-2-dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
It is used to slightly clean the code up, no logic is changed
Signed-off-by: Xiao Guangrong <xiaoguangrong@tencent.com>
Message-Id: <20180604095520.8563-5-xiaoguangrong@tencent.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Sync up xbzrle_cache_miss_prev only after migration iteration goes
forward
Signed-off-by: Xiao Guangrong <xiaoguangrong@tencent.com>
Message-Id: <20180604095520.8563-4-xiaoguangrong@tencent.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
dirty_bitmap_load_header return code is obtained but not handled. Fix
this.
Bug was introduced in b35ebdf076
"migration: add postcopy migration of dirty bitmaps" with the whole
function.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20180530112424.204835-1-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The migration code should be using the
RAMBLOCK_FOREACH_MIGRATABLE and qemu_ram_foreach_block_migratable
not the all-block versions; poison them so that we can't accidentally
use them.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20180605162545.80778-3-dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
There are still a few cases where migration code is using the macros
and functions that do all RAMBlocks rather than just the migratable
blocks; fix those up.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20180605162545.80778-2-dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Since commit 83ee768d62, we now have two places that define the
QJSON type:
$ git grep 'typedef struct QJSON QJSON'
include/migration/vmstate.h:typedef struct QJSON QJSON;
migration/qjson.h:typedef struct QJSON QJSON;
This breaks docker-test-build@centos6:
In file included from /tmp/qemu-test/src/migration/savevm.c:59:
/tmp/qemu-test/src/migration/qjson.h:16: error: redefinition of typedef
'QJSON'
/tmp/qemu-test/src/include/migration/vmstate.h:30: note: previous
declaration of 'QJSON' was here
make: *** [migration/savevm.o] Error 1
This happens because CentOS 6 has an old GCC 4.4.7. Even if redefining
a typedef with the same type is permitted since GCC 4.6, unless -pedantic
is passed, we don't really need to do that on purpose. Let's have a
single definition in <qemu/typedefs.h> instead.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <152844714981.11789.3657734445739553287.stgit@bahia.lan>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
vDPA support, fix to vhost blk RO bit handling, some include path
cleanups, NFIT ACPI table.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJbEXNvAAoJECgfDbjSjVRpc8gH/R8xrcFrV+k9wwbgYcOcGb6Y
LWjseE31pqJcxRV80vLOdzYEuLStZQKQQY7xBDMlA5vdyvZxIA6FLO2IsiJSbFAk
EK8pclwhpwQAahr8BfzenabohBv2UO7zu5+dqSvuJCiMWF3jGtPAIMxInfjXaOZY
odc1zY2D2EgsC7wZZ1hfraRbISBOiRaez9BoGDKPOyBY9G1ASEgxJgleFgoBLfsK
a1XU+fDM6hAVdxftfkTm0nibyf7PWPDyzqghLqjR9WXLvZP3Cqud4p8N29mY51pR
KSTjA4FYk6Z9EVMltyBHfdJs6RQzglKjxcNGdlrvacDfyFi79fGdiosVllrjfJM=
=3+V0
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
acpi, vhost, misc: fixes, features
vDPA support, fix to vhost blk RO bit handling, some include path
cleanups, NFIT ACPI table.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Fri 01 Jun 2018 17:25:19 BST
# gpg: using RSA key 281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream: (31 commits)
vhost-blk: turn on pre-defined RO feature bit
ACPI testing: test NFIT platform capabilities
nvdimm, acpi: support NFIT platform capabilities
tests/.gitignore: add entry for generated file
arch_init: sort architectures
ui: use local path for local headers
qga: use local path for local headers
colo: use local path for local headers
migration: use local path for local headers
usb: use local path for local headers
sd: fix up include
vhost-scsi: drop an unused include
ppc: use local path for local headers
rocker: drop an unused include
e1000e: use local path for local headers
ioapic: fix up includes
ide: use local path for local headers
display: use local path for local headers
trace: use local path for local headers
migration: drop an unused include
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When cancel migration during RDMA precopy, the source qemu main thread hangs sometime.
The backtrace is:
(gdb) bt
#0 0x00007f249eabd43d in write () from /lib64/libpthread.so.0
#1 0x00007f24a1ce98e4 in rdma_get_cm_event (channel=0x4675d10, event=0x7ffe2f643dd0) at src/cma.c:2189
#2 0x00000000007b6166 in qemu_rdma_cleanup (rdma=0x6784000) at migration/rdma.c:2296
#3 0x00000000007b7cae in qio_channel_rdma_close (ioc=0x3bfcc30, errp=0x0) at migration/rdma.c:2999
#4 0x00000000008db60e in qio_channel_close (ioc=0x3bfcc30, errp=0x0) at io/channel.c:273
#5 0x00000000007a8765 in channel_close (opaque=0x3bfcc30) at migration/qemu-file-channel.c:98
#6 0x00000000007a71f9 in qemu_fclose (f=0x527c000) at migration/qemu-file.c:334
#7 0x0000000000795b96 in migrate_fd_cleanup (opaque=0x3b46280) at migration/migration.c:1162
#8 0x000000000093a71b in aio_bh_call (bh=0x3db7a20) at util/async.c:90
#9 0x000000000093a7b2 in aio_bh_poll (ctx=0x3b121c0) at util/async.c:118
#10 0x000000000093f2ad in aio_dispatch (ctx=0x3b121c0) at util/aio-posix.c:436
#11 0x000000000093ab41 in aio_ctx_dispatch (source=0x3b121c0, callback=0x0, user_data=0x0)
at util/async.c:261
#12 0x00007f249f73c7aa in g_main_context_dispatch () from /lib64/libglib-2.0.so.0
#13 0x000000000093dc5e in glib_pollfds_poll () at util/main-loop.c:215
#14 0x000000000093dd4e in os_host_main_loop_wait (timeout=28000000) at util/main-loop.c:263
#15 0x000000000093de05 in main_loop_wait (nonblocking=0) at util/main-loop.c:522
#16 0x00000000005bc6a5 in main_loop () at vl.c:1944
#17 0x00000000005c39b5 in main (argc=56, argv=0x7ffe2f6443f8, envp=0x3ad0030) at vl.c:4752
It does not get the RDMA_CM_EVENT_DISCONNECTED event after rdma_disconnect sometime.
According to IB Spec once active side send DREQ message, it should wait for DREP message
and only once it arrived it should trigger a DISCONNECT event. DREP message can be dropped
due to network issues.
For that case the spec defines a DREP_timeout state in the CM state machine, if the DREP is
dropped we should get a timeout and a TIMEWAIT_EXIT event will be trigger.
Unfortunately the current kernel CM implementation doesn't include the DREP_timeout state
and in above scenario we will not get DISCONNECT or TIMEWAIT_EXIT events.
So it should not invoke rdma_get_cm_event which may hang forever, and the event channel
is also destroyed in qemu_rdma_cleanup.
Signed-off-by: Lidong Chen <lidongchen@tencent.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Because qio_channel_rdma_writev and qio_channel_rdma_readv maybe invoked
by different threads concurrently, this patch removes unnecessary variables
len in QIOChannelRDMA and use local variable instead.
Signed-off-by: Lidong Chen <lidongchen@tencent.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Lidong Chen <jemmy858585@gmail.com>
Activating the block devices causes the locks to be taken on
the backing file. If we're running with -S and the destination libvirt
hasn't started the destination with 'cont', it's expecting the locks are
still untaken.
Don't activate the block devices if we're not going to autostart the VM;
'cont' already will do that anyway. This change is tied to the new
migration capability 'late-block-activate' that defaults to off, keeping
the old behaviour by default.
bz: https://bugzilla.redhat.com/show_bug.cgi?id=1560854
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
On the POWER9 processor, the XIVE interrupt controller can control
interrupt sources using MMIO to trigger events, to EOI or to turn off
the sources. Priority management and interrupt acknowledgment is also
controlled by MMIO in the presenter sub-engine.
These MMIO regions are exposed to guests in QEMU with a set of 'ram
device' memory mappings, similarly to VFIO, and the VMAs are populated
dynamically with the appropriate pages using a fault handler.
But, these regions are an issue for migration. We need to discard the
associated RAMBlocks from the RAM state on the source VM and let the
destination VM rebuild the memory mappings on the new host in the
post_load() operation just before resuming the system.
To achieve this goal, the following introduces a new RAMBlock flag
RAM_MIGRATABLE which is updated in the vmstate_register_ram() and
vmstate_unregister_ram() routines. This flag is then used by the
migration to identify RAMBlocks to discard on the source. Some checks
are also performed on the destination to make sure nothing invalid was
sent.
This change impacts the boston, malta and jazz mips boards for which
migration compatibility is broken.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
QEMU 3.0 enables strict check for compression & decompression to
make the migration more robust, that depends on the source to fix
the internal design which triggers the unexpected error conditions
To make it work for migrating old version QEMU to 2.13 QEMU, we
introduce this parameter to disable the error check on the
destination which is the default behavior of the machine type
which is older than 2.13, alternately, the strict check can be
enabled explicitly as followings:
-M pc-q35-2.11 -global migration.decompress-error-check=true
Signed-off-by: Xiao Guangrong <xiaoguangrong@tencent.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
When pulling in headers that are in the same directory as the C file (as
opposed to one in include/), we should use its relative path, without a
directory.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
In the vmstate.h file, we just need a struct name. Use a forward
declaration instead of an include, then adjust the one affected .c file
to include the file that is no longer implicit from the header.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The VMS_STRUCT has no way to specify which version of a structure
to use. Add a type and a new field to allow the specific version
of a structure to be used.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Message-Id: <1524670052-28373-2-git-send-email-minyard@acm.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Buffers allocated with bitmap_new() should be freed with g_free().
Both reported by Coverity:
*** CID 1391300: API usage errors (ALLOC_FREE_MISMATCH)
/migration/ram.c: 3517 in ram_dirty_bitmap_reload()
3511 * the last one to sync, we need to notify the main send thread.
3512 */
3513 ram_dirty_bitmap_reload_notify(s);
3514
3515 ret = 0;
3516 out:
>>> CID 1391300: API usage errors (ALLOC_FREE_MISMATCH)
>>> Calling "free" frees "le_bitmap" using "free" but it should have been freed using "g_free".
3517 free(le_bitmap);
3518 return ret;
3519 }
3520
3521 static int ram_resume_prepare(MigrationState *s, void *opaque)
3522 {
*** CID 1391292: API usage errors (ALLOC_FREE_MISMATCH)
/migration/ram.c: 249 in ramblock_recv_bitmap_send()
243 * Mark as an end, in case the middle part is screwed up due to
244 * some "misterious" reason.
245 */
246 qemu_put_be64(file, RAMBLOCK_RECV_BITMAP_ENDING);
247 qemu_fflush(file);
248
>>> CID 1391292: API usage errors (ALLOC_FREE_MISMATCH)
>>> Calling "free" frees "le_bitmap" using "free" but it should have been freed using "g_free".
249 free(le_bitmap);
250
251 if (qemu_file_get_error(file)) {
252 return qemu_file_get_error(file);
253 }
254
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20180525015042.31778-1-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Commit:
commit 36c2f8be2c
Author: Juan Quintela <quintela@redhat.com>
Date: Wed Mar 7 08:40:52 2018 +0100
migration: Delay start of migration main routines
Missed tcp and fd transports. This fix its.
Reported-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Tested-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20180523091411.1073-1-quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
During a TLS connect we see:
migration_channel_connect calls
migration_tls_channel_connect
(calls after TLS setup)
migration_channel_connect
My previous error handling fix made migration_channel_connect
call migrate_fd_connect in all cases; unfortunately the above
means it gets called twice and crashes doing double cleanup.
Fixes: 688a3dcba9
Reported-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20180430185943.35714-1-dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
rdma_delete_block function deletes RDMALocalBlock base on index field,
but not update the index field. So when next time invoke rdma_delete_block,
it will not work correctly.
If start and cancel migration repeatedly, some RDMALocalBlock not invoke
ibv_dereg_mr to decrease kernel mm_struct vmpin. When vmpin is large than
max locked memory limitation, ibv_reg_mr will failed, and migration can not
start successfully again.
Signed-off-by: Lidong Chen <lidongchen@tencent.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <1525618499-1560-1-git-send-email-lidongchen@tencent.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Lidong Chen <jemmy858585@gmail.com>
It pauses an ongoing migration. Currently it only supports postcopy.
Note that this command will work on either side of the migration.
Basically when we trigger this on one side, it'll interrupt the other
side as well since the other side will get notified on the disconnect
event.
However, it's still possible that the other side is not notified, for
example, when the network is totally broken, or due to some firewall
configuration changes. In that case, we will also need to run the same
command on the other side so both sides will go into the paused state.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180502104740.12123-24-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
---
s/2.12/2.13/
Let's introduce a lock for that QEMUFile since we are going to operate
on it in multiple threads.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180502104740.12123-23-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The first allow-oob=true command. It's used on destination side when
the postcopy migration is paused and ready for a recovery. After
execution, a new migration channel will be established for postcopy to
continue.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180502104740.12123-21-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
---
s/2.12/2.13/
Though we may not need it, now we init both the src/dst migration
objects in migration_object_init() so that even incoming migration
object would be thread safe (it was not).
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180502104740.12123-20-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Finish the last step to do the final handshake for the recovery.
First source sends one MIG_CMD_RESUME to dst, telling that source is
ready to resume.
Then, dest replies with MIG_RP_MSG_RESUME_ACK to source, telling that
dest is ready to resume (after switch to postcopy-active state).
When source received the RESUME_ACK, it switches its state to
postcopy-active, and finally the recovery is completed.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180502104740.12123-19-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
After we updated the dirty bitmaps of ramblocks, we also need to update
the critical fields in RAMState to make sure it is ready for a resume.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180502104740.12123-18-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
This patch implements the first part of core RAM resume logic for
postcopy. ram_resume_prepare() is provided for the work.
When the migration is interrupted by network failure, the dirty bitmap
on the source side will be meaningless, because even the dirty bit is
cleared, it is still possible that the sent page was lost along the way
to destination. Here instead of continue the migration with the old
dirty bitmap on source, we ask the destination side to send back its
received bitmap, then invert it to be our initial dirty bitmap.
The source side send thread will issue the MIG_CMD_RECV_BITMAP requests,
once per ramblock, to ask for the received bitmap. On destination side,
MIG_RP_MSG_RECV_BITMAP will be issued, along with the requested bitmap.
Data will be received on the return-path thread of source, and the main
migration thread will be notified when all the ramblock bitmaps are
synchronized.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180502104740.12123-17-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
This is hook function to be called when a postcopy migration wants to
resume from a failure. For each module, it should provide its own
recovery logic before we switch to the postcopy-active state.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180502104740.12123-16-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Creating new message to reply for MIG_CMD_POSTCOPY_RESUME. One uint32_t
is used as payload to let the source know whether destination is ready
to continue the migration.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180502104740.12123-15-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Introducing this new command to be sent when the source VM is ready to
resume the paused migration. What the destination does here is
basically release the fault thread to continue service page faults.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180502104740.12123-14-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Introducing new return path message MIG_RP_MSG_RECV_BITMAP to send
received bitmap of ramblock back to source.
This is the reply message of MIG_CMD_RECV_BITMAP, it contains not only
the header (including the ramblock name), and it was appended with the
whole ramblock received bitmap on the destination side.
When the source receives such a reply message (MIG_RP_MSG_RECV_BITMAP),
it parses it, convert it to the dirty bitmap by inverting the bits.
One thing to mention is that, when we send the recv bitmap, we are doing
these things in extra:
- converting the bitmap to little endian, to support when hosts are
using different endianess on src/dst.
- do proper alignment for 8 bytes, to support when hosts are using
different word size (32/64 bits) on src/dst.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180502104740.12123-13-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Add a new vm command MIG_CMD_RECV_BITMAP to request received bitmap for
one ramblock.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180502104740.12123-12-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
On the destination side, we cannot wake up all the threads when we got
reconnected. The first thing to do is to wake up the main load thread,
so that we can continue to receive valid messages from source again and
reply when needed.
At this point, we switch the destination VM state from postcopy-paused
back to postcopy-recover.
Now we are finally ready to do the resume logic.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180502104740.12123-11-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Introducing new migration state "postcopy-recover". If a migration
procedure is paused and the connection is rebuilt afterward
successfully, we'll switch the source VM state from "postcopy-paused" to
the new state "postcopy-recover", then we'll do the resume logic in the
migration thread (along with the return path thread).
This patch only do the state switch on source side. Another following up
patch will handle the state switching on destination side using the same
status bit.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180502104740.12123-10-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
---
s/2.11/2.13/
This patch detects the "resume" flag of migration command, rebuild the
channels only if the flag is set.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180502104740.12123-9-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
It will be used when we want to resume one paused migration.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180502104740.12123-8-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
---
s/2.12/2.13/
Allows the fault thread to stop handling page faults temporarily. When
network failure happened (and if we expect a recovery afterwards), we
should not allow the fault thread to continue sending things to source,
instead, it should halt for a while until the connection is rebuilt.
When the dest main thread noticed the failure, it kicks the fault thread
to switch to pause state.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180502104740.12123-7-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Let the thread pause for network issues.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180502104740.12123-6-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
When there is IO error on the incoming channel (e.g., network down),
instead of bailing out immediately, we allow the dst vm to switch to the
new POSTCOPY_PAUSE state. Currently it is still simple - it waits the
new semaphore, until someone poke it for another attempt.
One note is that here on ram loading thread we cannot detect the
POSTCOPY_ACTIVE state, but we need to detect the more specific
POSTCOPY_INCOMING_RUNNING state, to make sure we have already loaded all
the device states.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180502104740.12123-5-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Now when network down for postcopy, the source side will not fail the
migration. Instead we convert the status into this new paused state, and
we will try to wait for a rescue in the future.
If a recovery is detected, migration_thread() will reset its local
variables to prepare for that.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180502104740.12123-4-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Introducing a new state "postcopy-paused", which can be used when the
postcopy migration is paused. It is targeted for postcopy network
failure recovery.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180502104740.12123-3-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The old incoming migration is running in main thread and default
gcontext. With the new qio_channel_add_watch_full() we can now let it
run in the thread's own gcontext (if there is one).
Currently this patch does nothing alone. But when any of the incoming
migration is run in another iothread (e.g., the upcoming migrate-recover
command), this patch will bind the incoming logic to the iothread
instead of the main thread (which may already get page faulted and
hanged).
RDMA is not considered for now since it's not even using the QIO watch
framework at all.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180502104740.12123-2-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Once there, we don't need the struct names anywhere, just the
typedefs. And now also document all fields.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
--
Be network agnostic.
Add error checking for all values.
We need to make sure that we have started all the multifd threads.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
In both sides. We still don't transmit anything through them.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Once there, make count field to always be accessed with atomic
operations. To make blocking operations, we need to know that the
thread is running, so create a bool to indicate that.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
--
Once here, s/terminate_multifd_*-threads/multifd_*_terminate_threads/
This is consistente with every other function
Fix the bug introduced by da3f56cb2e (migration: remove
ram_save_compressed_page()), It should be 'return' rather than
'res'
Sorry for this stupid mistake :(
Signed-off-by: Xiao Guangrong <xiaoguangrong@tencent.com>
Message-Id: <20180428081045.8878-1-xiaoguangrong@tencent.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Release buf on error path too.
Bug was introduced in b35ebdf076 "migration: add postcopy
migration of dirty bitmaps" with the whole function.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20180427142002.21930-3-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
CC: qemu-stable@nongnu.org
Signed-off-by: Eric Blake <eblake@redhat.com>
Now that we can safely call QOBJECT() on QObject * as well as its
subtypes, we can have macros qobject_ref() / qobject_unref() that work
everywhere instead of having to use QINCREF() / QDECREF() for QObject
and qobject_incref() / qobject_decref() for its subtypes.
The replacement is mechanical, except I broke a long line, and added a
cast in monitor_qmp_cleanup_req_queue_locked(). Unlike
qobject_decref(), qobject_unref() doesn't accept void *.
Note that the new macros evaluate their argument exactly once, thus no
need to shout them.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180419150145.24795-4-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Rebased, semantic conflict resolved, commit message improved]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Now, we can reuse the path in ram_save_page() to post the page out
as normal, then the only thing remained in ram_save_compressed_page()
is compression that we can move it out to the caller
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Xiao Guangrong <xiaoguangrong@tencent.com>
Message-Id: <20180330075128.26919-11-xiaoguangrong@tencent.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
It directly sends the page to the stream neither checking zero nor
using xbzrle or compression
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Xiao Guangrong <xiaoguangrong@tencent.com>
Message-Id: <20180330075128.26919-10-xiaoguangrong@tencent.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
save_zero_page() is always our first approach to try, move it to
the common place before calling ram_save_compressed_page
and ram_save_page
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Xiao Guangrong <xiaoguangrong@tencent.com>
Message-Id: <20180330075128.26919-9-xiaoguangrong@tencent.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The function is called by both ram_save_page and ram_save_target_page,
so move it to the common caller to cleanup the code
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Xiao Guangrong <xiaoguangrong@tencent.com>
Message-Id: <20180330075128.26919-8-xiaoguangrong@tencent.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Move some code from ram_save_target_page() to ram_save_host_page()
to make it be more readable for latter patches that dramatically
clean ram_save_target_page() up
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Xiao Guangrong <xiaoguangrong@tencent.com>
Message-Id: <20180330075128.26919-7-xiaoguangrong@tencent.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Abstract the common function control_save_page() to cleanup the code,
no logic is changed
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Xiao Guangrong <xiaoguangrong@tencent.com>
Message-Id: <20180330075128.26919-6-xiaoguangrong@tencent.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Currently the page being compressed is allowed to be updated by
the VM on the source QEMU, correspondingly the destination QEMU
just ignores the decompression error. However, we completely miss
the chance to catch real errors, then the VM is corrupted silently
To make the migration more robuster, we copy the page to a buffer
first to avoid it being written by VM, then detect and handle the
errors of both compression and decompression errors properly
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Xiao Guangrong <xiaoguangrong@tencent.com>
Message-Id: <20180330075128.26919-5-xiaoguangrong@tencent.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Current code uses uncompress() to decompress memory which manages
memory internally, that causes huge memory is allocated and freed
very frequently, more worse, frequently returning memory to kernel
will flush TLBs
So, we maintain the memory by ourselves and reuse it for each
decompression
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Jiang Biao <jiang.biao2@zte.com.cn>
Signed-off-by: Xiao Guangrong <xiaoguangrong@tencent.com>
Message-Id: <20180330075128.26919-4-xiaoguangrong@tencent.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Current code uses compress2() to compress memory which manages memory
internally, that causes huge memory is allocated and freed very
frequently
More worse, frequently returning memory to kernel will flush TLBs
and trigger invalidation callbacks on mmu-notification which
interacts with KVM MMU, that dramatically reduce the performance
of VM
So, we maintain the memory by ourselves and reuse it for each
compression
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Jiang Biao <jiang.biao2@zte.com.cn>
Signed-off-by: Xiao Guangrong <xiaoguangrong@tencent.com>
Message-Id: <20180330075128.26919-3-xiaoguangrong@tencent.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
As compression is a heavy work, do not do it in migration thread,
instead, we post it out as a normal page
Reviewed-by: Wei Wang <wei.w.wang@intel.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Xiao Guangrong <xiaoguangrong@tencent.com>
Message-Id: <20180330075128.26919-2-xiaoguangrong@tencent.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Postcopy total blocktime is available on destination side only.
But query-migrate was possible only for source. This patch
adds ability to call query-migrate on destination.
To be able to see postcopy blocktime, need to request postcopy-blocktime
capability.
The query-migrate command will show following sample result:
{"return":
"postcopy-vcpu-blocktime": [115, 100],
"status": "completed",
"postcopy-blocktime": 100
}}
postcopy_vcpu_blocktime contains list, where the first item is the first
vCPU in QEMU.
This patch has a drawback, it combines states of incoming and
outgoing migration. Ongoing migration state will overwrite incoming
state. Looks like better to separate query-migrate for incoming and
outgoing migration or add parameter to indicate type of migration.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Alexey Perevalov <a.perevalov@samsung.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <1521742647-25550-7-git-send-email-a.perevalov@samsung.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This patch provides blocktime calculation per vCPU,
as a summary and as a overlapped value for all vCPUs.
This approach was suggested by Peter Xu, as an improvements of
previous approch where QEMU kept tree with faulted page address and cpus bitmask
in it. Now QEMU is keeping array with faulted page address as value and vCPU
as index. It helps to find proper vCPU at UFFD_COPY time. Also it keeps
list for blocktime per vCPU (could be traced with page_fault_addr)
Blocktime will not calculated if postcopy_blocktime field of
MigrationIncomingState wasn't initialized.
Signed-off-by: Alexey Perevalov <a.perevalov@samsung.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <1521742647-25550-4-git-send-email-a.perevalov@samsung.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This patch adds request to kernel space for UFFD_FEATURE_THREAD_ID, in
case this feature is provided by kernel.
PostcopyBlocktimeContext is encapsulated inside postcopy-ram.c,
due to it being a postcopy-only feature.
Also it defines PostcopyBlocktimeContext's instance live time.
Information from PostcopyBlocktimeContext instance will be provided
much after postcopy migration end, instance of PostcopyBlocktimeContext
will live till QEMU exit, but part of it (vcpu_addr,
page_fault_vcpu_time) used only during calculation, will be released
when postcopy ended or failed.
To enable postcopy blocktime calculation on destination, need to
request proper compatibility (Patch for documentation will be at the
tail of the patch set).
As an example following command enable that capability, assume QEMU was
started with
-chardev socket,id=charmonitor,path=/var/lib/migrate-vm-monitor.sock
option to control it
[root@host]#printf "{\"execute\" : \"qmp_capabilities\"}\r\n \
{\"execute\": \"migrate-set-capabilities\" , \"arguments\": {
\"capabilities\": [ { \"capability\": \"postcopy-blocktime\", \"state\":
true } ] } }" | nc -U /var/lib/migrate-vm-monitor.sock
Or just with HMP
(qemu) migrate_set_capability postcopy-blocktime on
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Alexey Perevalov <a.perevalov@samsung.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <1521742647-25550-3-git-send-email-a.perevalov@samsung.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Right now it could be used on destination side to
enable vCPU blocktime calculation for postcopy live migration.
vCPU blocktime - it's time since vCPU thread was put into
interruptible sleep, till memory page was copied and thread awake.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Alexey Perevalov <a.perevalov@samsung.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <1521742647-25550-2-git-send-email-a.perevalov@samsung.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This reverts commit 0746a92612.
Discussion with kwolf suggests this is actually an API change that
we need to gate on a capability. Push to 2.13.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Activating the block devices causes the locks to be taken on
the backing file. If we're running with -S and the destination libvirt
hasn't started the destination with 'cont', it's expecting the locks are
still untaken.
Don't activate the block devices if we're not going to autostart the VM;
'cont' already will do that anyway.
bz: https://bugzilla.redhat.com/show_bug.cgi?id=1560854
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20180328170207.49512-1-dgilbert@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Fix leak spotted by ASAN:
Direct leak of 16 byte(s) in 1 object(s) allocated from:
#0 0x7fe1abb80a38 in __interceptor_calloc (/lib64/libasan.so.4+0xdea38)
#1 0x7fe1aaf1bf75 in g_malloc0 ../glib/gmem.c:124
#2 0x7fe1aaf1c249 in g_malloc0_n ../glib/gmem.c:355
#3 0x55f4841cfaa9 in postcopy_ram_fault_thread /home/elmarco/src/qemu/migration/postcopy-ram.c:596
#4 0x55f48479447b in qemu_thread_start /home/elmarco/src/qemu/util/qemu-thread-posix.c:504
#5 0x7fe1a043550a in start_thread (/lib64/libpthread.so.0+0x750a)
Regression introduced with commit 00fa4fc85b.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20180321113644.21899-1-marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Fix the case where when a migration with a bad protocol is tried,
we leave the block migration capability set.
(This is a cut down version of my 'migration: Fix block failure cases'
where it's other case was fixed by Peter's dd0ee30cae )
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20180316202114.32345-1-dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
only read_done blocks are in the queued to be flushed to the migration
stream. submitted blocks are still in flight.
Signed-off-by: Peter Lieven <pl@kamp.de>
Message-Id: <1520507908-16743-6-git-send-email-pl@kamp.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
the current implementation submits up to 512 I/O requests in parallel
which is much to high especially for a background task.
This patch adds a maximum limit of 16 I/O requests that can
be submitted in parallel to avoid monopolizing the I/O device.
Signed-off-by: Peter Lieven <pl@kamp.de>
Message-Id: <1520507908-16743-5-git-send-email-pl@kamp.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
RDMA migration implement save_page function for QEMUFile, but
ram_control_save_page do not increase bytes_xfer. So when doing
RDMA migration, it will use whole bandwidth.
Signed-off-by: Lidong Chen <lidongchen@tencent.com>
Message-Id: <1520692378-1835-1-git-send-email-lidongchen@tencent.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Instead of creating a QIOChannelSocket directly for the migration
server socket, use a QIONetListener. This provides the ability
to listen on multiple sockets at the same time, so enables
full support for IPv4/IPv6 dual stack.
For example, '$QEMU -incoming tcp::9000' now correctly listens
on both 0.0.0.0 and :: at the same time, instead of only on 0.0.0.0.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <20180312141714.7223-1-berrange@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Now that we have the mechanisms in here, allow shared memory in a
postcopy.
Note that QEMU can't tell who all the users of shared regions are
and thus can't tell whether all the users of the shared regions
have appropriate support for postcopy. Those devices that explicitly
support shared memory (e.g. vhost-user) must check, but it doesn't
stop weirder configurations causing problems.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Wire up a call to VHOST_USER_POSTCOPY_END message to the vhost clients
right before we ask the listener thread to shutdown.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Cause the vhost-user client to be woken up whenever:
a) We place a page in postcopy mode
b) We get a fault and the page has already been received
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add a hook to allow a client userfaultfd to be 'woken'
when a page arrives, and a walker that calls that
hook for relevant clients given a RAMBlock and offset.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Provide a helper to send a 'wake' request on a userfaultfd for
a shared process.
The address in the clients address space is specified together
with the RAMBlock it was resolved to.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Provide a helper to be used by shared waker functions to request
shared pages from the source.
The last_rb pointer is moved into the incoming state since this
helper can update it as well as the main fault thread function.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Utility for testing the map when you already know the offset
in the RAMBlock.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Notify the vhost-user slave on reception of the 'postcopy-listen'
event from the source.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Allow other userfaultfd's to be registered into the fault thread
so that handlers for shared memory can get responses.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Wire up a notifier to send a VHOST_USER_POSTCOPY_ADVISE
message on an incoming advise.
Later patches will fill in the behaviour/contents of the
message.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add a notifier chain for postcopy with a 'reason' flag
and an opportunity for a notifier member to return an error.
Call it when enabling postcopy.
This will initially used to enable devices to declare they're unable
to postcopy and later to notify of devices of stages within postcopy.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Use a flag on the RAMBlock to state whether it has the
UFFDIO_ZEROPAGE capability, use it when it's available.
This allows the use of postcopy on tmpfs as well as hugepage
backed files.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Postcopy migration of dirty bitmaps. Only named dirty bitmaps are migrated.
If destination qemu is already containing a dirty bitmap with the same name
as a migrated bitmap (for the same node), then, if their granularities are
the same the migration will be done, otherwise the error will be generated.
If destination qemu doesn't contain such bitmap it will be created.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-id: 20180313180320.339796-12-vsementsov@virtuozzo.com
[Changed '+' to '*' as per list discussion. --js]
Signed-off-by: John Snow <jsnow@redhat.com>
Allow migrate-start-postcopy for any postcopy type
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-id: 20180313180320.339796-11-vsementsov@virtuozzo.com
Only-postcopy savevm states (dirty-bitmap) don't need live iteration, so
to disable them and stop transporting empty sections there is a new
savevm handler.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 20180313180320.339796-10-vsementsov@virtuozzo.com
Add function opposite to qemu_get_counted_string.
qemu_put_counted_string puts one-byte length of the string (string
should not be longer than 255 characters), and then it puts the string,
without last zero byte.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 20180313180320.339796-9-vsementsov@virtuozzo.com
There would be savevm states (dirty-bitmap) which can migrate only in
postcopy stage. The corresponding pending is introduced here.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-id: 20180313180320.339796-6-vsementsov@virtuozzo.com
This patch does not allows saving/loading vmstate when
replay events queue is not empty. There is no reliable
way to save events queue, because it describes internal
coroutine state. Therefore saving and loading operations
should be deferred to another record/replay step.
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20180227095214.1060.32939.stgit@pasha-VirtualBox>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
When setting migration capabilities via QMP/HMP, we'll apply them even
if the capability check failed. Fix it.
Fixes: 4a84214ebe ("migration: provide migrate_caps_check()", 2017-07-18)
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180305094938.31374-1-peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
this actually limits (as the original commit mesage suggests) the
number of I/O buffers that can be allocated and not the number
of parallel (inflight) I/O requests.
Signed-off-by: Peter Lieven <pl@kamp.de>
Message-Id: <1520507908-16743-4-git-send-email-pl@kamp.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reset the dirty bitmap before reading to make sure we don't miss
any new data.
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Lieven <pl@kamp.de>
Message-Id: <1520507908-16743-3-git-send-email-pl@kamp.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
this patch makes the bulk phase of a block migration to take
place before we start transferring ram. As the bulk block migration
can take a long time its pointless to transfer ram during that phase.
Signed-off-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <1520507908-16743-2-git-send-email-pl@kamp.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Spotted thanks to ASAN:
QTEST_QEMU_BINARY=x86_64-softmmu/qemu-system-x86_64 tests/migration-test -p /x86_64/migration/bad_dest
==30302==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 48 byte(s) in 1 object(s) allocated from:
#0 0x7f60efba1a38 in __interceptor_calloc (/lib64/libasan.so.4+0xdea38)
#1 0x7f60eef3cf75 in g_malloc0 ../glib/gmem.c:124
#2 0x55ca9094702c in error_copy /home/elmarco/src/qemu/util/error.c:203
#3 0x55ca9037a30f in migrate_set_error /home/elmarco/src/qemu/migration/migration.c:1139
#4 0x55ca9037a462 in migrate_fd_error /home/elmarco/src/qemu/migration/migration.c:1150
#5 0x55ca9038162b in migrate_fd_connect /home/elmarco/src/qemu/migration/migration.c:2411
#6 0x55ca90386e41 in migration_channel_connect /home/elmarco/src/qemu/migration/channel.c:81
#7 0x55ca9038335e in socket_outgoing_migration /home/elmarco/src/qemu/migration/socket.c:85
#8 0x55ca9083dd3a in qio_task_complete /home/elmarco/src/qemu/io/task.c:142
#9 0x55ca9083d6cc in gio_task_thread_result /home/elmarco/src/qemu/io/task.c:88
#10 0x7f60eef37317 in g_idle_dispatch ../glib/gmain.c:5552
#11 0x7f60eef3490b in g_main_dispatch ../glib/gmain.c:3182
#12 0x7f60eef357ac in g_main_context_dispatch ../glib/gmain.c:3847
#13 0x55ca90927231 in glib_pollfds_poll /home/elmarco/src/qemu/util/main-loop.c:214
#14 0x55ca90927420 in os_host_main_loop_wait /home/elmarco/src/qemu/util/main-loop.c:261
#15 0x55ca909275fa in main_loop_wait /home/elmarco/src/qemu/util/main-loop.c:515
#16 0x55ca8fc1c2a4 in main_loop /home/elmarco/src/qemu/vl.c:1942
#17 0x55ca8fc2eb3a in main /home/elmarco/src/qemu/vl.c:4724
#18 0x7f60e4082009 in __libc_start_main (/lib64/libc.so.6+0x21009)
Indirect leak of 45 byte(s) in 1 object(s) allocated from:
#0 0x7f60efba1850 in malloc (/lib64/libasan.so.4+0xde850)
#1 0x7f60eef3cf0c in g_malloc ../glib/gmem.c:94
#2 0x7f60eef3d1cf in g_malloc_n ../glib/gmem.c:331
#3 0x7f60eef596eb in g_strdup ../glib/gstrfuncs.c:363
#4 0x55ca90947085 in error_copy /home/elmarco/src/qemu/util/error.c:204
#5 0x55ca9037a30f in migrate_set_error /home/elmarco/src/qemu/migration/migration.c:1139
#6 0x55ca9037a462 in migrate_fd_error /home/elmarco/src/qemu/migration/migration.c:1150
#7 0x55ca9038162b in migrate_fd_connect /home/elmarco/src/qemu/migration/migration.c:2411
#8 0x55ca90386e41 in migration_channel_connect /home/elmarco/src/qemu/migration/channel.c:81
#9 0x55ca9038335e in socket_outgoing_migration /home/elmarco/src/qemu/migration/socket.c:85
#10 0x55ca9083dd3a in qio_task_complete /home/elmarco/src/qemu/io/task.c:142
#11 0x55ca9083d6cc in gio_task_thread_result /home/elmarco/src/qemu/io/task.c:88
#12 0x7f60eef37317 in g_idle_dispatch ../glib/gmain.c:5552
#13 0x7f60eef3490b in g_main_dispatch ../glib/gmain.c:3182
#14 0x7f60eef357ac in g_main_context_dispatch ../glib/gmain.c:3847
#15 0x55ca90927231 in glib_pollfds_poll /home/elmarco/src/qemu/util/main-loop.c:214
#16 0x55ca90927420 in os_host_main_loop_wait /home/elmarco/src/qemu/util/main-loop.c:261
#17 0x55ca909275fa in main_loop_wait /home/elmarco/src/qemu/util/main-loop.c:515
#18 0x55ca8fc1c2a4 in main_loop /home/elmarco/src/qemu/vl.c:1942
#19 0x55ca8fc2eb3a in main /home/elmarco/src/qemu/vl.c:4724
#20 0x7f60e4082009 in __libc_start_main (/lib64/libc.so.6+0x21009)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20180306170959.3921-1-marcandre.lureau@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
A new parameter "context" is added to qio_channel_tls_handshake() is to
allow the TLS to be run on a non-default context. Still, no functional
change.
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We have worked on qio_task_run_in_thread() already. Further, let
all the qio channel APIs use that context.
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The previous commit improved compile time by including less of the
generated QAPI headers. This is impossible for stuff defined directly
in qapi-schema.json, because that ends up in headers that that pull in
everything.
Move everything but include directives from qapi-schema.json to new
sub-module qapi/misc.json, then include just the "misc" shard where
possible.
It's possible everywhere, except:
* monitor.c needs qmp-command.h to get qmp_init_marshal()
* monitor.c, ui/vnc.c and the generated qapi-event-FOO.c need
qapi-event.h to get enum QAPIEvent
Perhaps we'll get rid of those some other day.
Adding a type to qapi/migration.json now recompiles some 120 instead
of 2300 out of 5100 objects.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180211093607.27351-25-armbru@redhat.com>
[eblake: rebase to master]
Signed-off-by: Eric Blake <eblake@redhat.com>
In my "build everything" tree, a change to the types in
qapi-schema.json triggers a recompile of about 4800 out of 5100
objects.
The previous commit split up qmp-commands.h, qmp-event.h, qmp-visit.h,
qapi-types.h. Each of these headers still includes all its shards.
Reduce compile time by including just the shards we actually need.
To illustrate the benefits: adding a type to qapi/migration.json now
recompiles some 2300 instead of 4800 objects. The next commit will
improve it further.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180211093607.27351-24-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
[eblake: rebase to master]
Signed-off-by: Eric Blake <eblake@redhat.com>
Let the callers take the object, then pass it to migrate_init().
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180208103132.28452-12-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
We will not allow failures to happen when sending data from destination
to source via the return path. However it is possible that there can be
errors along the way. This patch allows the migrate_send_rp_message()
to return error when it happens, and further extended it to
migrate_send_rp_req_pages().
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180208103132.28452-9-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
A general helper to notify the fault thread.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180208103132.28452-4-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
It was only used for quitting the page fault thread before. Let it be
something more useful - now we can use it to notify a "wake" for the
page fault thread (for any reason), and it only means "quit" if the
fault_thread_quit is set.
Since we changed what it does, renaming it to userfault_event_fd.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180208103132.28452-3-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
If the postcopy down due to some reason, we can always see this on dst:
qemu-system-x86_64: RP: Received invalid message 0x0000 length 0x0000
However in most cases that's not the real issue. The problem is that
qemu_get_be16() has no way to show whether the returned data is valid or
not, and we are _always_ assuming it is valid. That's possibly not wise.
The best approach to solve this would be: refactoring QEMUFile interface
to allow the APIs to return error if there is. However it needs quite a
bit of work and testing. For now, let's explicitly check the validity
first before using the data in all places for qemu_get_*().
This patch tries to fix most of the cases I can see. Only if we are with
this, can we make sure we are processing the valid data, and also can we
make sure we can capture the channel down events correctly.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180208103132.28452-2-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Avoid crash in cleanup after a very early migration failure
(possibly due to my 688a3dcba9 'Route errors down ...')
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20180212160340.15333-2-dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
QEMUFile uses buffered IO so when writing small amounts (such as the Xen
device state file), the actual write call and any errors that may occur
only happen as part of qemu_fclose(). Therefore, report IO errors when
saving the device state under Xen by checking the return value of
qemu_fclose().
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Message-Id: <20180206163039.23661-1-ross.lagerwall@citrix.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This cleanup makes the number of objects depending on qapi/qmp/qdict.h
drop from 4550 (out of 4743) to 368 in my "build everything" tree.
For qapi/qmp/qobject.h, the number drops from 4552 to 390.
While there, separate #include from file comment with a blank line.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-13-armbru@redhat.com>
The macro expansions of qdict_put_TYPE() and qlist_append_TYPE() need
qbool.h, qnull.h, qnum.h and qstring.h to compile. We include qnull.h
and qnum.h in the headers, but not qbool.h and qstring.h. Works,
because we include those wherever the macros get used.
Open-coding these helpers is of dubious value. Turn them into
functions and drop the includes from the headers.
This cleanup makes the number of objects depending on qapi/qmp/qnum.h
from 4551 (out of 4743) to 46 in my "build everything" tree. For
qapi/qmp/qnull.h, the number drops from 4552 to 21.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-10-armbru@redhat.com>
This cleanup makes the number of objects depending on qapi/error.h
drop from 1910 (out of 4743) to 1612 in my "build everything" tree.
While there, separate #include from file comment with a blank line,
and drop a useless comment on why qemu/osdep.h is included first.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-5-armbru@redhat.com>
[Semantic conflict with commit 34e304e975 resolved, OSX breakage fixed]
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-4-armbru@redhat.com>
If postcopy-ram was set on the source but not on the destination,
migration doesn't occur, the destination prints an error and boots
the guest:
qemu-system-ppc64: Expected vmdescription section, but got 0
We end up with two running instances.
This behaviour was introduced in 2.11 by commit 58110f0acb "migration:
split common postcopy out of ram postcopy" to prepare ground for the
upcoming dirty bitmap postcopy support. It adds a new case where the
source may send an empty postcopy advise because dirty bitmap doesn't
need to check page sizes like RAM postcopy does.
If the source has enabled postcopy-ram, then it sends an advise with
the page size values. If the destination hasn't enabled postcopy-ram,
then loadvm_postcopy_handle_advise() leaves the page size values on
the stream and returns. This confuses qemu_loadvm_state() later on
and causes the destination to start execution.
As discussed several times, postcopy-ram should be enabled both sides
to be functional. This patch changes the destination to perform some
extra checks on the advise length to ensure this is the case. Otherwise
an error is returned and migration is aborted.
Reported-by: Balamuruhan S <bala24@linux.vnet.ibm.com>
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Daniel Henrique Barboza <danielhb@linux.vnet.ibm.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <151791621042.19120.3103118434734245776.stgit@bahia>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Since qemu_fopen_channel_{in,out}put take references on the underlying
IO channels, make sure to release our references to them.
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Message-Id: <20171101142526.1006-2-ross.lagerwall@citrix.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
In e91d895 I added the new pause-before-switchover mechanism
to allow migration completion to be delayed; this changes the
last state prior to completion to MIGRATE_STATUS_DEVICE rather
than MIGRATE_STATUS_ACTIVE.
Fix the failure path in migration_completion to recover the block
devices if it fails in MIGRATE_STATUS_DEVICE, not just the
MIGRATE_STATUS_ACTIVE that it previously had.
This corresponds to rh bz:
https://bugzilla.redhat.com/show_bug.cgi?id=1538494
whose symptom is an occasional source crash on a failed migration.
Fixes: e91d8951d5
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
It already has RAMBlock and offset, it can calculate it itself.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Fixes: b15df1ae50 ("migration: cleanup stats update into function")
The threshold size is changed to be recorded in s->threshold_size.
Signed-off-by: Wei Wang <wei.w.wang@intel.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
MAX_VM_CMD_PACKAGED_SIZE is a constant used in qemu_savevm_send_packaged
and loadvm_handle_cmd_packaged to determine whether a package is too
big to be sent or received. qemu_savevm_send_packaged is called inside
postcopy_start (migration/migration.c) to send the MigrationState
in a single blob to the destination, using the MIG_CMD_PACKAGED subcommand,
which will read it up using loadvm_handle_cmd_packaged. If the blob is
larger than MAX_VM_CMD_PACKAGED_SIZE, an error is thrown and the postcopy
migration is aborted. Both MAX_VM_CMD_PACKAGED_SIZE and MIG_CMD_PACKAGED
were introduced by commit 11cf1d984b ("MIG_CMD_PACKAGED: Send a packaged
chunk ..."). The constant has its original value of 1ul << 24 (16MB).
The current MAX_VM_CMD_PACKAGED_SIZE value is not enough to support postcopy
migration of bigger pseries guests. The blob size for a postcopy migration of
a pseries guest with the following setup:
qemu-system-ppc64 --nographic -vga none -machine pseries,accel=kvm -m 64G \
-smp 1,maxcpus=32 -device virtio-blk-pci,drive=rootdisk \
-drive file=f27.qcow2,if=none,cache=none,format=qcow2,id=rootdisk \
-netdev user,id=u1 -net nic,netdev=u1
Goes around 12MB. Bumping the RAM to 128G makes the blob sizes goes to 20MB.
With 256G the blob goes to 37MB - more than twice the current maximum size.
At this moment the pseries machine can handle guests with up to 1TB of RAM,
making this postcopy blob goes to 128MB of size approximately.
Following the discussions made in [1], there is a need to understand what
devices are aggressively consuming the blob in that manner and see if that
can be mitigated. Until then, we can set MAX_VM_CMD_PACKAGED_SIZE to the
maximum value allowed. Since the size is a 32 bit int variable, we can set
it as 1ul << 32, giving a maximum blob size of 4G that is enough to support
postcopy migration of 32TB RAM guests given the above constraints.
[1] https://lists.nongnu.org/archive/html/qemu-devel/2018-01/msg06313.html
Signed-off-by: Daniel Henrique Barboza <danielhb@linux.vnet.ibm.com>
Reported-by: Balamuruhan S <bala24@linux.vnet.ibm.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Route async errors (especially from sockets) down through
migration_channel_connect and on to migrate_fd_connect where they
can be cleaned up.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Allow whatever is performing the connection to pass migrate_fd_connect
an error to indicate there was a problem during connection, an allow
us to clean up.
The caller must free the error.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
laying on the mailing list for a while, but apparently no
maintainer feels really responsible for picking up.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQIcBAABAgAGBQJaZcaYAAoJEC7Z13T+cC21ab0P/3fE52pp0BEWRfM3MkTyJCgs
c3ZDR2raLsrwl5MMoeV6TCZ8ILp3RR5ipdnpsxAlUKi0e953hduFXJ/A9meElogu
i1BdCl7SBYUWXg9WKqH5cX9LGiGiRLQ53KehCB6wa4nXBjkL1bGtbprbp5kCb+Sn
tavBoIqkwxC2VvqJHL23uS7n/3bPkr4XA1bA/VWezm7be6f5bEqBzORdxPabRC3f
M7b1ntl2Xj9PXpwKZkHgET8Wg1Ne5kCUvvx9o22iMuHhBHsxAmMc06Q96wihDUI3
/CwzaErGrykGRX95y++yaBMUEYMSk90dv9cXHTMryDw/0id0OMnpcGm6SeQHlcQT
ATrhnH1VzEcgGJPYpqKxNvb0pJZ7t7gYUSi0HMC83PG2S9wD/kBvtB8rqumTolKB
cvI6l7PFfCZIr3FsTyGHX1KVRHX8PWljnKIvAbyUEuK4XDnSX7hT+7jQvuxj4HSZ
/ZlksnSIHcUf5gx6zG2StVKo5TEnY6JUhf8CuQeILW0ZGj6V/aUFbR5aMmgVinyj
p/2OOUsze6rYCcpVE2kI7hSMrSXk4QfvPyIvjGf86EVxTM4SK03bP4QVFwtZtFzA
HXXFIgKNcE7I7BhghC6PLcmHaYBiK8A5EIvXpgi4tD7L3PFLos6wtR6T2ze3mBn2
JyKxGw9rExlAJMi5/WE9
=JCAM
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/huth/tags/pull-request-2018-01-22' into staging
Pull request for various patches that have been reviewed and
laying on the mailing list for a while, but apparently no
maintainer feels really responsible for picking up.
# gpg: Signature made Mon 22 Jan 2018 11:10:16 GMT
# gpg: using RSA key 0x2ED9D774FE702DB5
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>"
# gpg: aka "Thomas Huth <thuth@redhat.com>"
# gpg: aka "Thomas Huth <huth@tuxfamily.org>"
# gpg: aka "Thomas Huth <th.huth@posteo.de>"
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* remotes/huth/tags/pull-request-2018-01-22:
hw/isa: Replace fprintf(stderr, "*\n" with error_report()
hw/ipmi: Replace fprintf(stderr, "*\n" with error_report()
hw/bt: Replace fprintf(stderr, "*\n" with error_report()
Fixes after renaming __FUNCTION__ to __func__
Replace all occurances of __FUNCTION__ with __func__
tests/cpu-plug-test: Test CPU hot-plugging on s390x
tests/cpu-plug-test: Check CPU hot-plugging on ppc64, too
tests/cpu-plug-test: Check the CPU hot-plugging with device_add, too
tests: Rename pc-cpu-test.c to cpu-plug-test.c
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This reverts commits
ca6011c migration: add postcopy total blocktime into query-migrate
5f32dc8 migration: add blocktime calculation into migration-test
2f7dae9 migration: postcopy_blocktime documentation
3be98be migration: calculate vCPU blocktime on dst side
01a87f0 migration: add postcopy blocktime ctx into MigrationIncomingState
31bf06a migration: introduce postcopy-blocktime capability
as they don't build on ppc32 due to trying to do atomic accesses
on types that are larger than the host pointer type.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Replace all occurs of __FUNCTION__ except for the check in checkpatch
with the non GCC specific __func__.
One line in hcd-musb.c was manually tweaked to pass checkpatch.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
[THH: Removed hunks related to pxa2xx_mmci.c (fixed already)]
Signed-off-by: Thomas Huth <thuth@redhat.com>
The point of writing a macro embedded in a 'do { ... } while (0)'
loop (particularly if the macro has multiple statements or would
otherwise end with an 'if' statement) is so that the macro can be
used as a drop-in statement with the caller supplying the
trailing ';'. Although our coding style frowns on brace-less 'if':
if (cond)
statement;
else
something else;
that is the classic case where failure to use do/while(0) wrapping
would cause the 'else' to pair with any embedded 'if' in the macro
rather than the intended outer 'if'. But conversely, if the macro
includes an embedded ';', then the same brace-less coding style
would now have two statements, making the 'else' a syntax error
rather than pairing with the outer 'if'. Thus, even though our
coding style with required braces is not impacted, ending a macro
with ';' makes our code harder to port to projects that use
brace-less styles.
The change should have no semantic impact. I was not able to
fully compile-test all of the changes (as some of them are
examples of the ugly bit-rotting debug print statements that are
completely elided by default, and I didn't want to recompile
with the necessary -D witnesses - cleaning those up is left as a
bite-sized task for another day); I did, however, audit that for
all files touched, all callers of the changed macros DID supply
a trailing ';' at the callsite, and did not appear to be used
as part of a brace-less conditional.
Found mechanically via: $ git grep -B1 'while (0);' | grep -A1 \\\\
Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20171201232433.25193-7-eblake@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It is already called in migrate_fd_cleanup.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Keep the one in migrate_fd_cleanup() would be enough. Removing the other
two.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
This patch only moved the last part of migration_thread() into a new
function migration_iteration_finish() to make it much shorter. With
previous works to remove some local variables, now it's fairly easy to
do that.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The major work for migration iterations are to move RAM/block/... data
via qemu_savevm_state_iterate(). Generalize those part into a single
function.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
We have quite a few lines in migration_thread() that calculates some
statistics for the migration interations. Isolate it into a single
function to improve readability.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
It converts the old if clauses into switch, explicitly mentions the
possible migration states. The old nested "if"s are not clear on what
we do on different states.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Generalize the calculation part when migration complete into a
function to simplify migration_thread().
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Introduce MigrationState.downtime_start to replace the local variable
"start_time" in migration_thread to avoid passing things around.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Firstly, it was passed around. Let's just move it into MigrationState
just like many other variables as state of migration, renaming it to
vm_was_running.
One thing to mention is that for postcopy, we actually don't need this
knowledge at all since postcopy can't resume a VM even if it fails (we
can see that from the old code too: when we try to resume we also check
against "entered_postcopy" variable). So further we do this:
- in postcopy_start(), we don't update vm_old_running since useless
- in migration_thread(), we don't need to check entered_postcopy when
resume, since it's only used for precopy.
Comment this out too for that variable definition.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
It was used either to:
1. store initial timestamp of migration start, and
2. store total time used by last migration
Let's provide two parameters for each of them. Mix use of the two is
slightly misleading.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Moving existing callers all into migrate_fd_cleanup(). It simplifies
migration_thread() a bit.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
When reaching here if we are still "active" it means we must be in colo
state. After a quick discussion offlist, we decided to use the safer
error_report().
Finally I want to use "switch" here rather than lots of complicated if
clauses.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
current_migration has .instance_finalize callback, but it is not
called, because nobody unrefs current_migration. Fix that.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Calling ram_bytes_remaining during the early part of setup is unsafe
because the ram_state isn't yet initialised.
This can happen in the sequence:
migrate
migrate_cancel
info migrate
if the migrate sticks trying to connect (e.g. to an unresponsive
destination due to the connect timeout). Here 'info migrate' sees
a state of CANCELLING and so assumes the migrate has partially happened.
partial fix for:
RH bz: https://bugzilla.redhat.com/show_bug.cgi?id=1525899
Reported-by: Xianxian Wang <xianwang@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Postcopy total blocktime is available on destination side only.
But query-migrate was possible only for source. This patch
adds ability to call query-migrate on destination.
To be able to see postcopy blocktime, need to request postcopy-blocktime
capability.
The query-migrate command will show following sample result:
{"return":
"postcopy-vcpu-blocktime": [115, 100],
"status": "completed",
"postcopy-blocktime": 100
}}
postcopy_vcpu_blocktime contains list, where the first item is the first
vCPU in QEMU.
This patch has a drawback, it combines states of incoming and
outgoing migration. Ongoing migration state will overwrite incoming
state. Looks like better to separate query-migrate for incoming and
outgoing migration or add parameter to indicate type of migration.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Alexey Perevalov <a.perevalov@samsung.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
This patch provides blocktime calculation per vCPU,
as a summary and as a overlapped value for all vCPUs.
This approach was suggested by Peter Xu, as an improvements of
previous approch where QEMU kept tree with faulted page address and cpus bitmask
in it. Now QEMU is keeping array with faulted page address as value and vCPU
as index. It helps to find proper vCPU at UFFD_COPY time. Also it keeps
list for blocktime per vCPU (could be traced with page_fault_addr)
Blocktime will not calculated if postcopy_blocktime field of
MigrationIncomingState wasn't initialized.
Signed-off-by: Alexey Perevalov <a.perevalov@samsung.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
This patch adds request to kernel space for UFFD_FEATURE_THREAD_ID, in
case this feature is provided by kernel.
PostcopyBlocktimeContext is encapsulated inside postcopy-ram.c,
due to it being a postcopy-only feature.
Also it defines PostcopyBlocktimeContext's instance live time.
Information from PostcopyBlocktimeContext instance will be provided
much after postcopy migration end, instance of PostcopyBlocktimeContext
will live till QEMU exit, but part of it (vcpu_addr,
page_fault_vcpu_time) used only during calculation, will be released
when postcopy ended or failed.
To enable postcopy blocktime calculation on destination, need to
request proper compatibility (Patch for documentation will be at the
tail of the patch set).
As an example following command enable that capability, assume QEMU was
started with
-chardev socket,id=charmonitor,path=/var/lib/migrate-vm-monitor.sock
option to control it
[root@host]#printf "{\"execute\" : \"qmp_capabilities\"}\r\n \
{\"execute\": \"migrate-set-capabilities\" , \"arguments\": {
\"capabilities\": [ { \"capability\": \"postcopy-blocktime\", \"state\":
true } ] } }" | nc -U /var/lib/migrate-vm-monitor.sock
Or just with HMP
(qemu) migrate_set_capability postcopy-blocktime on
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Alexey Perevalov <a.perevalov@samsung.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Right now it could be used on destination side to
enable vCPU blocktime calculation for postcopy live migration.
vCPU blocktime - it's time since vCPU thread was put into
interruptible sleep, till memory page was copied and thread awake.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Alexey Perevalov <a.perevalov@samsung.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Otherwise, we can't use it after calling socket_start_incoming_migration
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Once there, do one thing for line
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
We use int for everything (int64_t), and then we check that value is
between 0 and 255. Change it to the valid types.
This change only happens for HMP. QMP always use bytes and similar.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Thanks to Laszlo Ersek for spotting the double semicolon in target/i386/kvm.c
I have trivially grepped the tree for ';;' in C files.
Suggested-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
When migrating a VM with 'migrate_set_capability postcopy-ram on'
a postcopy_state is set during the process, ending up with the
state POSTCOPY_INCOMING_END when the migration is over. This
postcopy_state is taken into account inside ram_load to check
how it will load the memory pages. This same ram_load is called when
in a loadvm command.
Inside ram_load, the logic to see if we're at postcopy_running state
is:
postcopy_running = postcopy_state_get() >= POSTCOPY_INCOMING_LISTENING
postcopy_state_get() returns this enum type:
typedef enum {
POSTCOPY_INCOMING_NONE = 0,
POSTCOPY_INCOMING_ADVISE,
POSTCOPY_INCOMING_DISCARD,
POSTCOPY_INCOMING_LISTENING,
POSTCOPY_INCOMING_RUNNING,
POSTCOPY_INCOMING_END
} PostcopyState;
In the case where ram_load is executed and postcopy_state is
POSTCOPY_INCOMING_END, postcopy_running will be set to 'true' and
ram_load will behave like a postcopy is in progress. This scenario isn't
achievable in a migration but it is reproducible when executing
savevm/loadvm after migrating with 'postcopy-ram on', causing loadvm
to fail with Error -22:
Source:
(qemu) migrate_set_capability postcopy-ram on
(qemu) migrate tcp:127.0.0.1:4444
Dest:
(qemu) migrate_set_capability postcopy-ram on
(qemu)
ubuntu1704-intel login:
Ubuntu 17.04 ubuntu1704-intel ttyS0
ubuntu1704-intel login: (qemu)
(qemu) savevm test1
(qemu) loadvm test1
Unknown combination of migration flags: 0x4 (postcopy mode)
error while loading state for instance 0x0 of device 'ram'
Error -22 while loading VM state
(qemu)
This patch fixes this problem by changing the existing logic for
postcopy_advised and postcopy_running in ram_load, making them
'false' if we're at POSTCOPY_INCOMING_END state.
Signed-off-by: Daniel Henrique Barboza <danielhb@linux.vnet.ibm.com>
CC: Juan Quintela <quintela@redhat.com>
CC: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reported-by: Balamuruhan S <bala24@linux.vnet.ibm.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
When doing a live migration of a Xen guest with libxl, the images for
block devices are locked by the original QEMU process, and this prevent
the QEMU at the destination to take the lock and the migration fail.
>From QEMU point of view, once the RAM of a domain is migrated, there is
two QMP commands, "stop" then "xen-save-devices-state", at which point a
new QEMU is spawned at the destination.
Release locks in "xen-save-devices-state" so the destination can takes
them, if it's a live migration.
This patch add the "live" parameter to "xen-save-devices-state" which
default to true so older version of libxenlight can work with newer
version of QEMU.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
On one hand, it is a good idea for bdrv_next() to return a strong
reference because ideally nearly every pointer should be refcounted.
This fixes intermittent failure of iotest 194.
On the other, it is absolutely necessary for bdrv_next() itself to keep
a strong reference to both the BB (in its first phase) and the BDS (at
least in the second phase) because when called the next time, it will
dereference those objects to get a link to the next one. Therefore, it
needs these objects to stay around until then. Just storing the pointer
to the next in the iterator is not really viable because that pointer
might become invalid as well.
Both arguments taken together means we should probably just invoke
bdrv_ref() and blk_ref() in bdrv_next(). This means we have to assert
that bdrv_next() is always called from the main loop, but that was
probably necessary already before this patch and judging from the
callers, it also looks to actually be the case.
Keeping these strong references means however that callers need to give
them up if they decide to abort the iteration early. They can do so
through the new bdrv_next_cleanup() function.
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20171110172545.32609-1-mreitz@redhat.com
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Right now it is a variable in MigrationState instead of a
MigrationParameter. The change allows to set it as the rest of the
Migration parameters, from the command line, with
query_migration_paramters, set_migrate_parameters, etc.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
After the previous commits, we make sure that the value passed is
right, or we just drop an error. So now we return if there is one
error or we have setup correctly the value passed.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
--
Improve error messasge
Return 0 always for success
Now that we check that the value passed is a power of 2, we don't need
to play games when comparing what is the size that is going to take
the cache.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Instead of passing silently round down the number of pages, make it an
error that the cache size is not a power of 2.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
We now report errors also when we finish migration, not only on info
migrate. We plan to use this error from several places, and we want
the first error to happen to win, so we add an mutex to order it.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This patch adds ability to track down already received
pages, it's necessary for calculation vCPU block time in
postcopy migration feature, and for recovery after
postcopy migration failure.
Also it's necessary to solve shared memory issue in
postcopy livemigration. Information about received pages
will be transferred to the software virtual bridge
(e.g. OVS-VSWITCHD), to avoid fallocate (unmap) for
already received pages. fallocate syscall is required for
remmaped shared memory, due to remmaping itself blocks
ioctl(UFFDIO_COPY, ioctl in this case will end with EEXIT
error (struct page is exists after remmap).
Bitmap is placed into RAMBlock as another postcopy/precopy
related bitmaps.
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Alexey Perevalov <a.perevalov@samsung.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Just for placing auxilary operations inside helper,
auxilary operations like: track received pages,
notify about copying operation in futher patches.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Alexey Perevalov <a.perevalov@samsung.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Need to mark copied pages as closer as possible to the place where it
tracks down. That will be necessary in futher patch.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Alexey Perevalov <a.perevalov@samsung.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Rearrange the bitmap initialization and the first sync. Since at it,
make sure the locks are taken/released in correct order (I moved RCU
unlock upper - though it may not affect much).
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Let's further simplify ram_init_all() and ram_save_cleanup() by abstract
all the XBZRLE related codes into their own functions.
When allocating xbzrle cache, we are always very careful on -ENOMEM;
which makes sense. Replacing the last g_malloc0() with g_try_malloc0(),
then refactor the logic a bit.
This patch should be fixing some memory leaks when some memory
allocation failed for XBZRLE in the past.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
There are two Mutexes that are created but not yet destroyed for
RAMState. Fix that.
Since we are at it, provide helper function to clean up RAMState.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The old ram_state_init() is not really initializing the RAMState only,
but including lots of other stuff that is RAM-related. Renaming it to
ram_init_all(). Instead, provide a real ram_state_init().
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Add pause-before-switchover support for postcopy.
After starting postcopy it will transition
active->pre-switchover->postcopy_active
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
If a migration_cancel is issued during the new paused state,
kick the pause_sem to get to unpause so it can cancel.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
A new qmp command allows the caller to continue from a given
paused state.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Wait for a semaphore before completing the migration,
if the previously added capability was enabled.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Add two statuses for use when the 'pause-before-switchover'
capability is enabled.
'pre-switchover' is the state that we wait in for management
to allow us to continue.
'device' is the state we enter while serialising the devices
after management gives us the OK.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
When 'pause-before-switchover' is enabled, the outgoing migration
will pause before invalidating the block devices and serializing
the device state.
At this point the management layer gets the chance to clean up any
device jobs or other device users before the migration completes.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Once there, take a total size instead of the size of the pages. We
move the check that the new_size is bigger than one page from
xbzrle_cache_resize().
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
--
Fix typo spotted by Peter Xu
It was not used at all since commit:
27af7d6ea5
which replaced its use by the dirty sync count.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Some of the callers were already scaling bytes to sectors; others
can be easily converted to pass byte offsets, all in our shift
towards a consistent byte interface everywhere. Making the change
will also make it easier to write the hold-out callers to use byte
rather than sectors for their iterations; it also makes it easier
for a future dirty-bitmap patch to offload scaling over to the
internal hbitmap. Although all callers happen to pass
sector-aligned values, make the internal scaling robust to any
sub-sector requests.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Half the callers were already scaling bytes to sectors; the other
half can eventually be simplified to use byte iteration. Both
callers were already using the result as a bool, so make that
explicit. Making the change also makes it easier for a future
dirty-bitmap patch to offload scaling over to the internal hbitmap.
Remember, asking whether a byte is dirty is effectively asking
whether the entire granularity containing the byte is dirty, since
we only track dirtiness by granularity.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Thanks to recent cleanups, all callers were scaling a return value
of sectors into bytes; do the scaling internally instead.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
vmstate_save_state is called in lots of places.
Route error returns from the easier cases back up; there are lots
of more complex cases where their own error paths need fixing.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20170925112917.21340-7-dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Commit message fix up as Peter's review
Route the errors from vsmtate_save_state back up through
vmstate_save and out to the normal device state path.
That's the normal error path done.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20170925112917.21340-6-dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Route the errors from vmstate_save_state up through
vmstate_subsection_save (and back down, all rather recursive).
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20170925112917.21340-5-dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Commit message fixed up as per Peter's review
Check the return values from vmstate_save_state for fields and also the
return values from 'put' for fields that use that.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20170925112917.21340-4-dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Check the return value of pre_save state and fail vmstate_save_state
if the pre_save failed.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20170925112917.21340-3-dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Modify the pre_save method on VMStateDescription to return an int
rather than void so that it potentially can fail.
Changed zillions of devices to make them return 0; the only
case I've made it return non-0 is hw/intc/s390_flic_kvm.c that already
had an error_report/return case.
Note: If you add an error exit in your pre_save you must emit
an error_report to say why.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20170925112917.21340-2-dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
auto-converge and block migration currently do not play well together.
During block migration the auto-converge logic detects that ram
migration makes no progress and thus throttles down the vm until
it nearly stalls completely. Avoid this by disabling the throttling
logic during the bulk phase of the block migration.
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Lieven <pl@kamp.de>
Message-Id: <1506421996-12513-1-git-send-email-pl@kamp.de>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
