Move a use of TARGET_LONG_BITS out of tcg/tcg.h.
Include the new file only where required.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This had been pulled in from exec/cpu_ldst.h, via exec/exec-all.h,
but the include of tcg.h will be removed.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Disconnect the layout of ArchCPU from TCG compilation.
Pass the relative offset of 'env' and 'neg.tlb.f' as a parameter.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This makes CPUTLBEntry agnostic to the address size of the guest.
When 32-bit addresses are in effect, we can simply read the low
32 bits of the 64-bit field. Similarly when we need to update
the field for setting TLB_NOTDIRTY.
For TCG backends that could in theory be big-endian, but in
practice are not (arm, loongarch, riscv), use QEMU_BUILD_BUG_ON
to document and ensure this is not accidentally missed.
For s390x, which is always big-endian, use HOST_BIG_ENDIAN anyway,
to document the reason for the adjustment.
For sparc64 and ppc64, always perform a 64-bit load, and rely on
the following 32-bit comparison to ignore the high bits.
Rearrange mips and ppc if ladders for clarity.
Reviewed-by: Anton Johansson <anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Removes the only use of TARGET_LONG_BITS from tcg.h, which is to be
target independent. Move the symbol to a define in tcg-op.h, which
will continue to be target dependent. Rather than complicate matters
for the use in tb_gen_code(), expand the definition there.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Now we no longer have dynamic state affecting things we can remove the
additional fields in cpu.h and simplify the TB hash calculation.
For the benchmark:
hyperfine -w 2 -m 20 \
"./arm-softmmu/qemu-system-arm -cpu cortex-a15 \
-machine type=virt,highmem=off \
-display none -m 2048 \
-serial mon:stdio \
-netdev user,id=unet,hostfwd=tcp::2222-:22 \
-device virtio-net-pci,netdev=unet \
-device virtio-scsi-pci \
-blockdev driver=raw,node-name=hd,discard=unmap,file.driver=host_device,file.filename=/dev/zen-disk/debian-bullseye-armhf \
-device scsi-hd,drive=hd -smp 4 \
-kernel /home/alex/lsrc/linux.git/builds/arm/arch/arm/boot/zImage \
-append 'console=ttyAMA0 root=/dev/sda2 systemd.unit=benchmark.service' \
-snapshot"
It has a marginal effect on runtime, before:
Time (mean ± σ): 26.279 s ± 2.438 s [User: 41.113 s, System: 1.843 s]
Range (min … max): 24.420 s … 32.565 s 20 runs
after:
Time (mean ± σ): 24.440 s ± 2.885 s [User: 34.474 s, System: 2.028 s]
Range (min … max): 21.663 s … 29.937 s 20 runs
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1358
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20230526165401.574474-10-alex.bennee@linaro.org
Message-Id: <20230524133952.3971948-9-alex.bennee@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
PAGE_WRITE is current writability, as modified by TB protection;
PAGE_WRITE_ORG is the original page writability.
Fixes: cdfac37be0 ("accel/tcg: Honor atomicity of loads")
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This had been set since the beginning, is never undefined,
and it would seem to be harmful to debugging to do so.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Remove the locally defined load_atomic16 and store_atomic16,
along with HAVE_al16 and HAVE_al16_fast in favor of the
routines defined in atomic128.h.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
These symbols will shortly become dynamic runtime tests and
therefore not appropriate for the preprocessor. Use the
matching CONFIG_* symbols for that purpose.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Now that load/store are gone, we're always passing
PAGE_READ | PAGE_WRITE for RMW atomic operations.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Atomic load/store of 128-byte quantities is now handled
by cpu_{ld,st}16_mmu.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
With the current structure of cputlb.c, there is no difference
between the little-endian and big-endian entry points, aside
from the assert. Unify the pairs of functions.
The only use of the functions with explicit endianness was in
target/sparc64, and that was only to satisfy the assert: the
correct endianness is already built into memop.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Not only the routines in ldst_atomicity.c.inc need markup,
but also the ones in the headers.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In fcdab382c8 we removed a tcg_gen_extu_tl_i64 from gen_empty_mem_cb,
and failed to adjust the associated copy, leading to a failed assert.
Fixes: fcdab382c8 ("accel/tcg: Widen plugin_gen_empty_mem_callback to i64")
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230518145813.2940745-1-richard.henderson@linaro.org>
arm64 has different capability from x86 to enable the dirty ring, which
is KVM_CAP_DIRTY_LOG_RING_ACQ_REL. Besides, arm64 also needs the backup
bitmap extension (KVM_CAP_DIRTY_LOG_RING_WITH_BITMAP) when 'kvm-arm-gicv3'
or 'arm-its-kvm' device is enabled. Here the extension is always enabled
and the unnecessary overhead to do the last stage of dirty log synchronization
when those two devices aren't used is introduced, but the overhead should
be very small and acceptable. The benefit is cover future cases where those
two devices are used without modifying the code.
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Tested-by: Zhenyu Zhang <zhenyzha@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-Id: <20230509022122.20888-5-gshan@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Due to multiple capabilities associated with the dirty ring for different
architectures: KVM_CAP_DIRTY_{LOG_RING, LOG_RING_ACQ_REL} for x86 and
arm64 separately. There will be more to be done in order to support the
dirty ring for arm64.
Lets add helper kvm_dirty_ring_init() to enable the dirty ring. With this,
the code looks a bit clean.
No functional change intended.
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Tested-by: Zhenyu Zhang <zhenyzha@redhat.com>
Message-Id: <20230509022122.20888-4-gshan@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In the last stage of live migration or memory slot removal, the
backup bitmap needs to be synchronized when it has been enabled.
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Tested-by: Zhenyu Zhang <zhenyzha@redhat.com>
Message-Id: <20230509022122.20888-3-gshan@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The global dirty log synchronization is used when KVM and dirty ring
are enabled. There is a particularity for ARM64 where the backup
bitmap is used to track dirty pages in non-running-vcpu situations.
It means the dirty ring works with the combination of ring buffer
and backup bitmap. The dirty bits in the backup bitmap needs to
collected in the last stage of live migration.
In order to identify the last stage of live migration and pass it
down, an extra parameter is added to the relevant functions and
callbacks. This last stage indicator isn't used until the dirty
ring is enabled in the subsequent patches.
No functional change intended.
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Tested-by: Zhenyu Zhang <zhenyzha@redhat.com>
Message-Id: <20230509022122.20888-2-gshan@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Disconnect guest tlb parameters from TCG compilation.
Reviewed-by: Anton Johansson <anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Disconnect guest page size from TCG compilation.
While this could be done via exec/target_page.h, we want to cache
the value across multiple memory access operations, so we might
as well initialize this early.
The changes within tcg/ are entirely mechanical:
sed -i s/TARGET_PAGE_BITS/s->page_bits/g
sed -i s/TARGET_PAGE_MASK/s->page_mask/g
Reviewed-by: Anton Johansson <anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This will enable replacement of TARGET_LONG_BITS within tcg/.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Since we do this inside gen_empty_mem_cb anyway, let's
do this earlier inside tcg expansion.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
As do_gen_mem_cb is called once, merge it into gen_empty_mem_cb.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
As gen_mem_wrapped is only used in plugin_gen_empty_mem_callback,
we can avoid the curiosity of union mem_gen_fn by inlining it.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Always pass the target address as uint64_t.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Always pass the target address as uint64_t.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Always pass the target address as uint64_t.
Adjust tcg_out_{ld,st}_helper_args to match.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We already pass uint64_t to restore_state_to_opc; this changes all
of the other uses from insn_start through the encoding to decoding.
Reviewed-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
There is an edge condition prior to gcc13 for which optimization
is required to generate 16-byte atomic sequences. Detect this.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
TCG backends may need to defer to a helper to implement
the atomicity required by a given operation. Mirror the
interface used in system mode.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
With the current structure of cputlb.c, there is no difference
between the little-endian and big-endian entry points, aside
from the assert. Unify the pairs of functions.
Hoist the qemu_{ld,st}_helpers arrays to tcg.c.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Create ldst_atomicity.c.inc.
Not required for user-only code loads, because we've ensured that
the page is read-only before beginning to translate code.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Instead of trying to unify all operations on uint64_t, use
mmu_lookup() to perform the basic tlb hit and resolution.
Create individual functions to handle access by size.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Instead of trying to unify all operations on uint64_t, pull out
mmu_lookup() to perform the basic tlb hit and resolution.
Create individual functions to handle access by size.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Instead of playing with offsetof in various places, use
MMUAccessType to index an array. This is easily defined
instead of the previous dummy padding array in the union.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Like cpu_in_exclusive_context, but also true if
there is no other cpu against which we could race.
Use it in tb_flush as a direct replacement.
Use it in cpu_loop_exit_atomic to ensure that there
is no loop against cpu_exec_step_atomic.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The round-robin scheduler will iterate over the CPU list with an
assigned budget until the next timer expiry and may exit early because
of a TB exit. This is fine under normal operation but with icount
enabled and SMP it is possible for a CPU to be starved of run time and
the system live-locks.
For example, booting a riscv64 platform with '-icount
shift=0,align=off,sleep=on -smp 2' we observe a livelock once the kernel
has timers enabled and starts performing TLB shootdowns. In this case
we have CPU 0 in M-mode with interrupts disabled sending an IPI to CPU
1. As we enter the TCG loop, we assign the icount budget to next timer
interrupt to CPU 0 and begin executing where the guest is sat in a busy
loop exhausting all of the budget before we try to execute CPU 1 which
is the target of the IPI but CPU 1 is left with no budget with which to
execute and the process repeats.
We try here to add some fairness by splitting the budget across all of
the CPUs on the thread fairly before entering each one. The CPU count
is cached on CPU list generation ID to avoid iterating the list on each
loop iteration. With this change it is possible to boot an SMP rv64
guest with icount enabled and no hangs.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Jamie Iles <quic_jiles@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230427020925.51003-3-quic_jiles@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
A copy-paste bug had us looking at the victim cache for writes.
Cc: qemu-stable@nongnu.org
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Fixes: 08dff435e2 ("tcg: Probe the proper permissions for atomic ops")
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20230505204049.352469-1-richard.henderson@linaro.org>
The load side can use a relaxed load, which will surely happen before
the work item is run by async_safe_run_on_cpu() or before double-checking
under mmap_lock. The store side can use an atomic RMW operation.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
While the old type was correct in the ideal sense, some ABIs require
the argument to be zero-extended. Using uint32_t for all such values
is a decent compromise.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
At least RISC-V has the need to be able to perform a read
using execute permissions, outside of translation.
Add helpers to facilitate this.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Tested-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230325105429.1142530-9-richard.henderson@linaro.org>
Message-Id: <20230412114333.118895-9-richard.henderson@linaro.org>
Add tcg expander and helper functions for and-compliment
vector with scalar operand.
Signed-off-by: Nazar Kazakov <nazar.kazakov@codethink.co.uk>
Message-Id: <20230428144757.57530-10-lawrence.hunter@codethink.co.uk>
[rth: Split out of larger patch.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
When PMP entry overlap part of the page, we'll set the tlb_size to 1, which
will make the address in tlb entry set with TLB_INVALID_MASK, and the next
access will again go through tlb_fill.However, this way will not work in
tb_gen_code() => get_page_addr_code_hostp(): the TLB host address will be
cached, and the following instructions can use this host address directly
which may lead to the bypass of PMP related check.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1542.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230422130329.23555-6-liweiwei@iscas.ac.cn>
Currently we report whether the TCG accelerator is in
'one-insn-per-tb' mode in the 'info status' output. This is a pretty
minor piece of TCG specific information, and we want to deprecate the
'singlestep' field of the associated QMP command. Move the
'one-insn-per-tb' reporting to 'info jit'.
We don't need a deprecate-and-drop period for this because the
HMP interface has no stability guarantees.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20230417164041.684562-8-peter.maydell@linaro.org
The only place left that looks at the old 'singlestep' global
variable is the TCG curr_cflags() function. Replace the old global
with a new 'one_insn_per_tb' which is defined in tcg-all.c and
declared in accel/tcg/internal.h. This keeps it restricted to the
TCG code, unlike 'singlestep' which was available to every file in
the system and defined in multiple different places for softmmu vs
linux-user vs bsd-user.
While we're making this change, use qatomic_read() and qatomic_set()
on the accesses to the new global, because TCG will read it without
holding a lock.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20230417164041.684562-4-peter.maydell@linaro.org
This commit adds 'one-insn-per-tb' as a property on the TCG
accelerator object, so you can enable it with
-accel tcg,one-insn-per-tb=on
It has the same behaviour as the existing '-singlestep' command line
option. We use a different name because 'singlestep' has always been
a confusing choice, because it doesn't have anything to do with
single-stepping the CPU. What it does do is force TCG emulation to
put one guest instruction in each TB, which can be useful in some
situations (such as analysing debug logs).
The existing '-singlestep' commandline options are decoupled from the
global 'singlestep' variable and instead now are syntactic sugar for
setting the accel property. (These can then go away after a
deprecation period.)
The global variable remains for the moment as:
* what the TCG code looks at to change its behaviour
* what HMP and QMP use to query and set the behaviour
In the following commits we'll clean those up to not directly
look at the global variable.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230417164041.684562-2-peter.maydell@linaro.org
It's possible that we want to reap a dirty ring on a vcpu that is during
creation, because the vcpu is put onto list (CPU_FOREACH visible) before
initialization of the structures. In this case:
qemu_init_vcpu
x86_cpu_realizefn
cpu_exec_realizefn
cpu_list_add <---- can be probed by CPU_FOREACH
qemu_init_vcpu
cpus_accel->create_vcpu_thread(cpu);
kvm_init_vcpu
map kvm_dirty_gfns <--- kvm_dirty_gfns valid
Don't try to reap dirty ring on vcpus during creation or it'll crash.
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=2124756
Reported-by: Xiaohui Li <xiaohli@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1d14deb6684bcb7de1c9633c5bd21113988cc698.1676563222.git.huangy81@chinatelecom.cn>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Assign pc and use store_release to assign tb.
Fixes: 2dd5b7a1b9 ("accel/tcg: Move jmp-cache `CF_PCREL` checks to caller")
Reported-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
CPUs often set CF_PCREL in tcg_cflags before qemu_init_vcpu(), in which
tcg_cflags will be overwrited by tcg_cpu_init_cflags().
Fixes: 4be790263f ("accel/tcg: Replace `TARGET_TB_PCREL` with `CF_PCREL`")
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Message-Id: <20230331150609.114401-6-liweiwei@iscas.ac.cn>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Pass the address of the last byte to be changed, rather than
the first address past the last byte. This avoids overflow
when the last page of the address space is involved.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Pass the address of the last byte to be changed, rather than
the first address past the last byte. This avoids overflow
when the last page of the address space is involved.
Properly truncate tb_last to the end of the page; the comment about
tb_end being past the end of the page being ok is not correct,
considering overflow.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Pass the address of the last byte to be changed, rather than
the first address past the last byte. This avoids overflow
when the last page of the address space is involved.
Fixes a bug in the loop comparision where "<= end" would lock
one more page than required.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Pass the address of the last byte to be changed, rather than
the first address past the last byte. This avoids overflow
when the last page of the address space is involved.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Pass the address of the last byte to be changed, rather than
the first address past the last byte. This avoids overflow
when the last page of the address space is involved.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Pass the address of the last byte to be changed, rather than
the first address past the last byte. This avoids overflow
when the last page of the address space is involved.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1528
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
qemu-user can hang in a multi-threaded fork. One common
reason is that when creating a TB, between fork and exec
we manipulate a GTree whose memory allocator (GSlice) is
not fork-safe.
Although POSIX does not mandate it, the system's allocator
(e.g. tcmalloc, libc malloc) is probably fork-safe.
Fix some of these hangs by using QTree, which uses the system's
allocator regardless of the Glib version that we used at
configuration time.
Tested with the test program in the original bug report, i.e.:
```
void garble() {
int pid = fork();
if (pid == 0) {
exit(0);
} else {
int wstatus;
waitpid(pid, &wstatus, 0);
}
}
void supragarble(unsigned depth) {
if (depth == 0)
return ;
std::thread a(supragarble, depth-1);
std::thread b(supragarble, depth-1);
garble();
a.join();
b.join();
}
int main() {
supragarble(10);
}
```
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/285
Reported-by: Valentin David <me@valentindavid.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Emilio Cota <cota@braap.org>
Message-Id: <20230205163758.416992-3-cota@braap.org>
[rth: Add QEMU_DISABLE_CFI for all callback using functions.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
When dm_restrict is set, QEMU isn't permitted to update the XenStore node
to indicate its running status. Previously, the xs_write() call would fail
but the failure was ignored.
However, in refactoring to allow for emulated XenStore operations, a new
call to xs_open() was added. That one didn't fail gracefully, causing a
fatal error when running in dm_restrict mode.
Partially revert the offending patch, removing the additional call to
xs_open() because the global 'xenstore' variable is still available; it
just needs to be used with qemu_xen_xs_write() now instead of directly
with the xs_write() libxenstore function.
Also make the whole thing conditional on !xen_domid_restrict. There's no
point even registering the state change handler to attempt to update the
XenStore node when we know it's destined to fail.
Fixes: ba2a92db1f ("hw/xen: Add xenstore operations to allow redirection to internal emulation")
Reported-by: Jason Andryuk <jandryuk@gmail.com>
Co-developed-by: Jason Andryuk <jandryuk@gmail.com>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Tested-by: Jason Andryuk <jandryuk@gmail.com>
Message-Id: <1f141995bb61af32c2867ef5559e253f39b0949c.camel@infradead.org>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
This had been pulled in from hw/core/cpu.h,
but that will be removed.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230310195252.210956-6-richard.henderson@linaro.org>
[AJB: also syscall-trace.h]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230315174331.2959-16-alex.bennee@linaro.org>
Reviewed-by: Emilio Cota <cota@braap.org>
This had been pulled in via qemu/plugin.h from hw/core/cpu.h,
but that will be removed.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230310195252.210956-5-richard.henderson@linaro.org>
[AJB: add various additional cases shown by CI]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230315174331.2959-15-alex.bennee@linaro.org>
Reviewed-by: Emilio Cota <cota@braap.org>
Do this in cpu_tb_exec (normal exit) and cpu_loop_exit (exception),
adjacent to where we reset can_do_io.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1381
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230310195252.210956-2-richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230315174331.2959-12-alex.bennee@linaro.org>
Reviewed-by: Emilio Cota <cota@braap.org>
Move the tcg_temp_free_* and tcg_temp_ebb_new_* declarations
and inlines to the new header. These are private to the
implementation, and will prevent tcg_temp_free_* from creeping
back into the guest front ends.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
- split user and softmmu code
- use cleaner headers for tb_flush, target_ulong
- probe for gdb multiarch support at configure
- make syscall handling target independent
- add update guest debug of accel ops
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmQHomMACgkQ+9DbCVqe
KkTtFAf/aEyKY0iUNxtB4/oV1L2VnLaZi+iKoZT4RQgrhOhzr5WV6/3/V05cw1RJ
SIwcl8wB4gowYILs44eM/Qzcixiugl++2rvM4YVXiQyWKzkH6sY4X2iFuPGTwHLp
y+E7RM77QNS7M9xYaVkdsQawnbsgjG67wZKbb88aaekFEn61UuDg1V2Nqa2ICy7Y
/8yGIB2ixDfXOF0z4g8NOG44BXTDBtJbcEzf5GMz6D4HGnPZUbENy1nT0OcBk3zK
PqKPNkPFZ360pqA9MtougjZ3xTBb7Afe9nRRMquV2RoFmkkY2otSjdPBFQu5GBlm
NyTXEzjIQ6tCZlbS0eqdPVrUHHUx9g==
=Al36
-----END PGP SIGNATURE-----
Merge tag 'pull-gdbstub-070323-3' of https://gitlab.com/stsquad/qemu into staging
gdbstub refactor:
- split user and softmmu code
- use cleaner headers for tb_flush, target_ulong
- probe for gdb multiarch support at configure
- make syscall handling target independent
- add update guest debug of accel ops
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmQHomMACgkQ+9DbCVqe
# KkTtFAf/aEyKY0iUNxtB4/oV1L2VnLaZi+iKoZT4RQgrhOhzr5WV6/3/V05cw1RJ
# SIwcl8wB4gowYILs44eM/Qzcixiugl++2rvM4YVXiQyWKzkH6sY4X2iFuPGTwHLp
# y+E7RM77QNS7M9xYaVkdsQawnbsgjG67wZKbb88aaekFEn61UuDg1V2Nqa2ICy7Y
# /8yGIB2ixDfXOF0z4g8NOG44BXTDBtJbcEzf5GMz6D4HGnPZUbENy1nT0OcBk3zK
# PqKPNkPFZ360pqA9MtougjZ3xTBb7Afe9nRRMquV2RoFmkkY2otSjdPBFQu5GBlm
# NyTXEzjIQ6tCZlbS0eqdPVrUHHUx9g==
# =Al36
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 07 Mar 2023 20:45:23 GMT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* tag 'pull-gdbstub-070323-3' of https://gitlab.com/stsquad/qemu: (30 commits)
gdbstub: move update guest debug to accel ops
gdbstub: Build syscall.c once
stubs: split semihosting_get_target from system only stubs
gdbstub: Adjust gdb_do_syscall to only use uint32_t and uint64_t
gdbstub: Remove gdb_do_syscallv
gdbstub: split out softmmu/user specifics for syscall handling
include: split target_long definition from cpu-defs
testing: probe gdb for supported architectures ahead of time
gdbstub: only compile gdbstub twice for whole build
gdbstub: move syscall handling to new file
gdbstub: move register helpers into standalone include
gdbstub: don't use target_ulong while handling registers
gdbstub: fix address type of gdb_set_cpu_pc
gdbstub: specialise stub_can_reverse
gdbstub: introduce gdb_get_max_cpus
gdbstub: specialise target_memory_rw_debug
gdbstub: specialise handle_query_attached
gdbstub: abstract target specific details from gdb_put_packet_binary
gdbstub: rationalise signal mapping in softmmu
gdbstub: move chunks of user code into own files
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Continuing the refactor of a48e7d9e52 (gdbstub: move guest debug support
check to ops) by removing hardcoded kvm_enabled() from generic cpu.c
code, and replace it with a property of AccelOpsClass.
Signed-off-by: Mads Ynddal <m.ynddal@samsung.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230207131721.49233-1-mads@ynddal.dk>
[AJB: add ifdef around update_guest_debug_ops, fix brace]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230302190846.2593720-27-alex.bennee@linaro.org>
Message-Id: <20230303025805.625589-30-richard.henderson@linaro.org>
This aids subsystems (like gdbstub) that want to trigger a flush
without pulling target specific headers.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230302190846.2593720-8-alex.bennee@linaro.org>
Message-Id: <20230303025805.625589-8-richard.henderson@linaro.org>
This header is now only for native Xen code, not PV backends that may be
used in Xen emulation. Since the toolstack libraries may depend on the
specific version of Xen headers that they pull in (and will set the
__XEN_TOOLS__ macro to enable internal definitions that they depend on),
the rule is that xen_native.h (and thus the toolstack library headers)
must be included *before* any of the headers in include/hw/xen/interface.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
There's no need for this to be in the Xen accel code, and as we want to
use the Xen console support with KVM-emulated Xen we'll want to have a
platform-agnostic version of it. Make it use GString to build up the
path while we're at it.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Since all temps allocated by guest front-ends are now TEMP_TB,
and we don't recycle TEMP_TB, there's no point in requiring
that the front-ends free the temps at all. Begin by dropping
the inner-most checks that all temps have been freed.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Fixes a bug in that we weren't reporting these changes.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Using an atomic write or read-write insn on ROM is basically
a happens-never case. Handle it via stop-the-world, which
will generate non-atomic serial code, where we can correctly
ignore the write while producing the correct read result.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
While changes are made to prot within tlb_set_page_full, they are
an implementation detail of softmmu. Retain the original for any
target use of probe_access_full.
Fixes: 4047368938 ("accel/tcg: Introduce tlb_set_page_full")
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
When CONFIG_PROFILER is set there are various undefined references to
profile_getclock. Include the header which defines this function.
For example:
../tcg/tcg.c: In function ‘tcg_gen_code’:
../tcg/tcg.c:4905:51: warning: implicit declaration of function ‘profile_getclock’ [-Wimplicit-function-declaration]
4905 | qatomic_set(&prof->opt_time, prof->opt_time - profile_getclock());
| ^~~~~~~~~~~~~~~~
Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230303084948.3351546-1-rjones@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Here we are creating a temp whose value needs to be replaced,
but always storing NULL into CPUState.plugin_mem_cbs.
Use tcg_constant_ptr(0) explicitly.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
All of these uses have quite local scope.
Avoid tcg_const_*, because we haven't added a corresponding
interface for TEMP_EBB. Use explicit tcg_gen_movi_* instead.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Write back the number of insns that we attempt to translate,
so that if we longjmp out we have a more accurate limit for
the next attempt. This results in fewer restarts when some
limit is consumed by few instructions.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In preparation for returning the number of insns generated
via the same pointer. Adjust only the prototypes so far.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230227135202.9710-13-anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
tb-jmp-cache.h contains a few small functions that only exist to hide a
CF_PCREL check, however the caller often already performs such a check.
This patch moves CF_PCREL checks from the callee to the caller, and also
removes these functions which now only hide an access of the jmp-cache.
Signed-off-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230227135202.9710-12-anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230227135202.9710-5-anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The default number of PIRQs is set to 256 to avoid issues with 32-bit MSI
devices. Allow it to be increased if the user desires.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
This just initializes the basic Xen support in KVM for now. Only permitted
on TYPE_PC_MACHINE because that's where the sysbus devices for Xen heap
overlay, event channel, grant tables and other stuff will exist. There's
no point having the basic hypercall support if nothing else works.
Provide sysemu/kvm_xen.h and a kvm_xen_get_caps() which will be used
later by support devices.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Also set XEN_ATTACH mode in xen_init() to reflect the truth; not that
anyone ever cared before. It was *only* ever checked in xen_init_pv()
before.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Change to match the recent change to probe_access_flags.
All existing callers updated to supply 0, so no change in behaviour.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
probe_access_flags() as it is today uses probe_access_full(), which in
turn uses probe_access_internal() with size = 0. probe_access_internal()
then uses the size to call the tlb_fill() callback for the given CPU.
This size param ('fault_size' as probe_access_internal() calls it) is
ignored by most existing .tlb_fill callback implementations, e.g.
arm_cpu_tlb_fill(), ppc_cpu_tlb_fill(), x86_cpu_tlb_fill() and
mips_cpu_tlb_fill() to name a few.
But RISC-V riscv_cpu_tlb_fill() actually uses it. The 'size' parameter
is used to check for PMP (Physical Memory Protection) access. This is
necessary because PMP does not make any guarantees about all the bytes
of the same page having the same permissions, i.e. the same page can
have different PMP properties, so we're forced to make sub-page range
checks. To allow RISC-V emulation to do a probe_acess_flags() that
covers PMP, we need to either add a 'size' param to the existing
probe_acess_flags() or create a new interface (e.g.
probe_access_range_flags).
There are quite a few probe_* APIs already, so let's add a 'size' param
to probe_access_flags() and re-use this API. This is done by open coding
what probe_access_full() does inside probe_acess_flags() and passing the
'size' param to probe_acess_internal(). Existing probe_access_flags()
callers use size = 0 to not change their current API usage. 'size' is
asserted to enforce single page access like probe_access() already does.
No behavioral changes intended.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230223234427.521114-2-dbarboza@ventanamicro.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Copy part of the description of commit f7b78602fd ("accel/tcg:
Add cluster number to TCG TB hash") in tcg_cpu_init_cflags(),
improving a bit CPUState::cluster_index documentation.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20230216142338.82982-2-philmd@linaro.org>
replay API is used deeply within TCG common code (common to user
and system emulation). Unfortunately "sysemu/replay.h" requires
some QAPI headers for few system-specific declarations, example:
void replay_input_event(QemuConsole *src, InputEvent *evt);
Since commit c2651c0eaa ("qapi/meson: Restrict UI module to system
emulation and tools") the QAPI header defining the InputEvent is
not generated anymore.
To keep it simple, extract the 'core' replay prototypes to a new
"exec/replay-core.h" header which we include in the TCG code that
doesn't need the rest of the replay API.
Reviewed-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Message-Id: <20221219170806.60580-5-philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Silent when compiling with -Wextra:
../accel/kvm/kvm-all.c:2291:17: warning: missing field 'num' initializer [-Wmissing-field-initializers]
{ NULL, }
^
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20221220143532.24958-3-philmd@linaro.org>
Unused since introduction in commit 04b0de0ee8
("xen: factor out common functions").
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Paul Durrant <paul@xen.org>
Message-Id: <20230215153451.30626-1-philmd@linaro.org>
Since commit a0e61807a3 ("qapi: Remove QMP events and commands from
user-mode builds") we don't generate the "qapi-commands-machine.h"
header in a user-emulation-only build.
Rename 'hmp.c' as 'monitor.c' and move the QMP functions from
cpu-exec.c (which is always compiled) to monitor.c (which is only
compiled when system-emulation is selected).
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221219170806.60580-4-philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221219170806.60580-2-philmd@linaro.org>
Both insert/remove_breakpoint() handlers are used in system and
user emulation. We can not use the 'hwaddr' type on user emulation,
we have to use 'vaddr' which is defined as "wide enough to contain
any #target_ulong virtual address".
gdbstub.c doesn't require to include "exec/hwaddr.h" anymore.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221216215519.5522-4-philmd@linaro.org>
If an instruction straddles a page boundary, and the first page
was ram, but the second page was MMIO, we would abort. Handle
this as if both pages are MMIO, by setting the ram_addr_t for
the first page to -1.
Reported-by: Sid Manning <sidneym@quicinc.com>
Reported-by: Jørgen Hansen <Jorgen.Hansen@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This commit was created with scripts/clean-includes.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20230202133830.2152150-19-armbru@redhat.com>
This will allow targets to avoid rolling their own.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
These are not yet considering atomicity of the 16-byte value;
this is a direct replacement for the current target code which
uses a pair of 8-byte operations.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
After commit 4e4fa6c12d ("accel/tcg: Complete cpu initialization
before registration"), it looks the CPUJumpCache pointer can be NULL.
This causes a SIGSEV when running debug-wp-migration kvm unit test.
At the first place it should be clarified why this TCG code is called
with KVM acceleration. This may hide another bug.
Fixes: 4e4fa6c12d ("accel/tcg: Complete cpu initialization before registration")
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20230203171510.2867451-1-eric.auger@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This moves these commands from MAINTAINERS section "QMP" to new
section "Stats". Status is Orphan. Volunteers welcome!
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20230124121946.1139465-23-armbru@redhat.com>
There are actually a whole bunch of helpers that don't affect memory
that we shouldn't instrument. They are helpfully identified by the
TCG_CALL_NO_SIDE_EFFECTS flag which marks out lookup_tb_ptr as well as
a lot of the maths helpers. To avoid the string compare we introduce a
new flag for plugin internals so we skip that too.
Related: #1381
Signed-off-by: Emilio Cota <cota@braap.org>
Message-Id: <20230108164731.61469-4-cota@braap.org>
[AJB: updated to skip all no SE plugins, add flag for plugin helper]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230124180127.1881110-34-alex.bennee@linaro.org>
We were mistakenly checking tcg_ctx->plugin_insn as a canary to know
whether the TB had emitted helpers that might have accessed memory.
The problem is that tcg_ctx->plugin_insn gets updated on every
instruction in the TB, which results in us wrongly performing the
optimization (i.e. not clearing cpu->plugin_mem_cbs) way too often,
since it's not rare that the last instruction in the TB doesn't
use helpers.
Fix it by tracking a per-TB canary.
While at it, expand documentation.
Related: #1381
Signed-off-by: Emilio Cota <cota@braap.org>
Message-Id: <20230108164731.61469-2-cota@braap.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230124180127.1881110-32-alex.bennee@linaro.org>
Fixes the appended use-after-free. The root cause is that
during tb invalidation we use CPU_FOREACH, and therefore
to safely free a vCPU we must wait for an RCU grace period
to elapse.
$ x86_64-linux-user/qemu-x86_64 tests/tcg/x86_64-linux-user/munmap-pthread
=================================================================
==1800604==ERROR: AddressSanitizer: heap-use-after-free on address 0x62d0005f7418 at pc 0x5593da6704eb bp 0x7f4961a7ac70 sp 0x7f4961a7ac60
READ of size 8 at 0x62d0005f7418 thread T2
#0 0x5593da6704ea in tb_jmp_cache_inval_tb ../accel/tcg/tb-maint.c:244
#1 0x5593da6704ea in do_tb_phys_invalidate ../accel/tcg/tb-maint.c:290
#2 0x5593da670631 in tb_phys_invalidate__locked ../accel/tcg/tb-maint.c:306
#3 0x5593da670631 in tb_invalidate_phys_page_range__locked ../accel/tcg/tb-maint.c:542
#4 0x5593da67106d in tb_invalidate_phys_range ../accel/tcg/tb-maint.c:614
#5 0x5593da6a64d4 in target_munmap ../linux-user/mmap.c:766
#6 0x5593da6dba05 in do_syscall1 ../linux-user/syscall.c:10105
#7 0x5593da6f564c in do_syscall ../linux-user/syscall.c:13329
#8 0x5593da49e80c in cpu_loop ../linux-user/x86_64/../i386/cpu_loop.c:233
#9 0x5593da6be28c in clone_func ../linux-user/syscall.c:6633
#10 0x7f496231cb42 in start_thread nptl/pthread_create.c:442
#11 0x7f49623ae9ff (/lib/x86_64-linux-gnu/libc.so.6+0x1269ff)
0x62d0005f7418 is located 28696 bytes inside of 32768-byte region [0x62d0005f0400,0x62d0005f8400)
freed by thread T148 here:
#0 0x7f49627b6460 in __interceptor_free ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:52
#1 0x5593da5ac057 in cpu_exec_unrealizefn ../cpu.c:180
#2 0x5593da81f851 (/home/cota/src/qemu/build/qemu-x86_64+0x484851)
Signed-off-by: Emilio Cota <cota@braap.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230111151628.320011-2-cota@braap.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230124180127.1881110-27-alex.bennee@linaro.org>
qemu/coroutine.h and qemu/lockable.h include each other.
They need each other only in macro expansions, so we could simply drop
both inclusions to break the loop, and add suitable includes to files
that expand the macros.
Instead, move a part of qemu/coroutine.h to new qemu/coroutine-core.h
so that qemu/coroutine-core.h doesn't need qemu/lockable.h, and
qemu/lockable.h only needs qemu/coroutine-core.h. Result:
qemu/coroutine.h includes qemu/lockable.h includes
qemu/coroutine-core.h.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20221221131435.3851212-5-armbru@redhat.com>
[Semantic rebase conflict with 7c10cb38cc "accel/tcg: Add debuginfo
support" resolved]
The 'hwaddr' type is defined in "exec/hwaddr.h" as:
hwaddr is the type of a physical address
(its size can be different from 'target_ulong').
All definitions use the 'HWADDR_' prefix, except TARGET_FMT_plx:
$ fgrep define include/exec/hwaddr.h
#define HWADDR_H
#define HWADDR_BITS 64
#define HWADDR_MAX UINT64_MAX
#define TARGET_FMT_plx "%016" PRIx64
^^^^^^
#define HWADDR_PRId PRId64
#define HWADDR_PRIi PRIi64
#define HWADDR_PRIo PRIo64
#define HWADDR_PRIu PRIu64
#define HWADDR_PRIx PRIx64
#define HWADDR_PRIX PRIX64
Since hwaddr's size can be *different* from target_ulong, it is
very confusing to read one of its format using the 'TARGET_FMT_'
prefix, normally used for the target_long / target_ulong types:
$ fgrep TARGET_FMT_ include/exec/cpu-defs.h
#define TARGET_FMT_lx "%08x"
#define TARGET_FMT_ld "%d"
#define TARGET_FMT_lu "%u"
#define TARGET_FMT_lx "%016" PRIx64
#define TARGET_FMT_ld "%" PRId64
#define TARGET_FMT_lu "%" PRIu64
Apparently this format was missed during commit a8170e5e97
("Rename target_phys_addr_t to hwaddr"), so complete it by
doing a bulk-rename with:
$ sed -i -e s/TARGET_FMT_plx/HWADDR_FMT_plx/g $(git grep -l TARGET_FMT_plx)
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230110212947.34557-1-philmd@linaro.org>
[thuth: Fix some warnings from checkpatch.pl along the way]
Signed-off-by: Thomas Huth <thuth@redhat.com>
We now have the option to generate direct or indirect
goto_tb depending on the dynamic displacement, thus
the define is no longer necessary or completely accurate.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Replace 'tc_ptr' and 'addr' with 'tb' and 'n'.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Stop overloading jmp_target_arg for both offset and address,
depending on TCG_TARGET_HAS_direct_jump. Instead, add a new
field to hold the jump insn offset and always set the target
address in jmp_target_addr[]. This will allow a tcg backend
to use either direct or indirect depending on displacement.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This can replace four other variables that are references
into the TranslationBlock structure.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This will shortly be used for more than reset.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Recently the g_assert(cpu == current_cpu) test has been
intermittently failing with gcc. Reorg the code around
the setjmp to minimize the lifetime of the cpu variable
affected by the setjmp.
This appears to fix the existing issue with clang as well.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1147
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add ability to dump /tmp/perf-<pid>.map and jit-<pid>.dump.
The first one allows the perf tool to map samples to each individual
translation block. The second one adds the ability to resolve symbol
names, line numbers and inspect JITed code.
Example of use:
perf record qemu-x86_64 -perfmap ./a.out
perf report
or
perf record -k 1 qemu-x86_64 -jitdump ./a.out
DEBUGINFOD_URLS= perf inject -j -i perf.data -o perf.data.jitted
perf report -i perf.data.jitted
Co-developed-by: Vanderson M. do Rosario <vandersonmr2@gmail.com>
Co-developed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20230112152013.125680-4-iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add libdw-based functions for loading and querying debuginfo. Load
debuginfo from the system and the linux-user loaders.
This is useful for the upcoming perf support, which can then put
human-readable guest symbols instead of raw guest PCs into perfmap and
jitdump files.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20230112152013.125680-3-iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
If we update an existing memslot (e.g., resize, split), we temporarily
remove the memslot to re-add it immediately afterwards. These updates
are not atomic, especially not for KVM VCPU threads, such that we can
get spurious faults.
Let's inhibit most KVM ioctls while performing relevant updates, such
that we can perform the update just as if it would happen atomically
without additional kernel support.
We capture the add/del changes and apply them in the notifier commit
stage instead. There, we can check for overlaps and perform the ioctl
inhibiting only if really required (-> overlap).
To keep things simple we don't perform additional checks that wouldn't
actually result in an overlap -- such as !RAM memory regions in some
cases (see kvm_set_phys_mem()).
To minimize cache-line bouncing, use a separate indicator
(in_ioctl_lock) per CPU. Also, make sure to hold the kvm_slots_lock
while performing both actions (removing+re-adding).
We have to wait until all IOCTLs were exited and block new ones from
getting executed.
This approach cannot result in a deadlock as long as the inhibitor does
not hold any locks that might hinder an IOCTL from getting finished and
exited - something fairly unusual. The inhibitor will always hold the BQL.
AFAIKs, one possible candidate would be userfaultfd. If a page cannot be
placed (e.g., during postcopy), because we're waiting for a lock, or if the
userfaultfd thread cannot process a fault, because it is waiting for a
lock, there could be a deadlock. However, the BQL is not applicable here,
because any other guest memory access while holding the BQL would already
result in a deadlock.
Nothing else in the kernel should block forever and wait for userspace
intervention.
Note: pause_all_vcpus()/resume_all_vcpus() or
start_exclusive()/end_exclusive() cannot be used, as they either drop
the BQL or require to be called without the BQL - something inhibitors
cannot handle. We need a low-level locking mechanism that is
deadlock-free even when not releasing the BQL.
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Tested-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20221111154758.1372674-4-eesposit@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Using the new accel-blocker API, mark where ioctls are being called
in KVM. Next, we will implement the critical section that will take
care of performing memslots modifications atomically, therefore
preventing any new ioctl from running and allowing the running ones
to finish.
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20221111154758.1372674-3-eesposit@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This API allows the accelerators to prevent vcpus from issuing
new ioctls while execting a critical section marked with the
accel_ioctl_inhibit_begin/end functions.
Note that all functions submitting ioctls must mark where the
ioctl is being called with accel_{cpu_}ioctl_begin/end().
This API requires the caller to always hold the BQL.
API documentation is in sysemu/accel-blocker.h
Internally, it uses a QemuLockCnt together with a per-CPU QemuLockCnt
(to minimize cache line bouncing) to keep avoid that new ioctls
run when the critical section starts, and a QemuEvent to wait
that all running ioctls finish.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221111154758.1372674-2-eesposit@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* Always send errors to logfile when daemonized (Greg)
* Add support for IDE CompactFlash card (Lubomir)
* First round of build system cleanups (myself)
* First round of feature removals (myself)
* Reduce "qemu/accel.h" inclusion (Philippe)
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmO3Ym0UHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNYmwf+LHEw+4T0fk1+2NfgIzH3+8s1EqDm
Ai56EjxO/p5NUptflXAnhn4P3LawswmmNE0ZIFFFBgwG5E9L+Jj/u5efuLu4uYPg
bboEBDn8nxSNN2l08u9TyS6kSWSxbwwrs7i2+V+4uQIlVIcCHu+A0vpXns4vWwY0
zZGF8CgJKDQdPIxdXrH8+6/xtadQ8uDkYsAWDiY/nhozCsCUTAZGTXWEQbHJLARI
Z4X+Cmz/NFB9G4ka6K/y0HbQw99KA8G/EMPUSglN0ya10yjpyzrmeI7IlIves+5U
8lhCZXyBhaV9GXlIK1vIgEXlHf83C19a+v0DpW0bpxK631n2VR5y3CArBg==
=2Koq
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
* Atomic memslot updates for KVM (Emanuele, David)
* Always send errors to logfile when daemonized (Greg)
* Add support for IDE CompactFlash card (Lubomir)
* First round of build system cleanups (myself)
* First round of feature removals (myself)
* Reduce "qemu/accel.h" inclusion (Philippe)
# gpg: Signature made Thu 05 Jan 2023 23:51:09 GMT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu: (24 commits)
i386: SGX: remove deprecated member of SGXInfo
target/i386: Add SGX aex-notify and EDECCSSA support
util: remove support -chardev tty and -chardev parport
util: remove support for hex numbers with a scaling suffix
KVM: remove support for kernel-irqchip=off
docs: do not talk about past removal as happening in the future
meson: accept relative symlinks in "meson introspect --installed" data
meson: cleanup compiler detection
meson: support meson 0.64 -Doptimization=plain
configure: test all warnings
tests/qapi-schema: remove Meson workaround
meson: cleanup dummy-cpus.c rules
meson: tweak hardening options for Windows
configure: remove backwards-compatibility and obsolete options
configure: preserve qemu-ga variables
configure: cleanup $cpu tests
configure: remove dead function
configure: remove useless write_c_skeleton
ide: Add "ide-cf" driver, a CompactFlash card
ide: Add 8-bit data mode
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Now that qtest is available on all targets including Windows, dummy-cpus.c
is included unconditionally in the build. It also does not need to be
compiled per-target.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
As in page_get_flags, we need to try again with the mmap
lock held if we fail a page lookup.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Because we allow lockless lookups, we have to be careful
when it is freed. Use rcu to delay the free until safe.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
When called from syscall(), we are not within a TB and pc == 0.
We can skip the check for invalidating the current TB.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We have been allocating a worst case number of arguments
to support calls. Instead, allow the size to vary.
By default leave space for 4 args, to maximize reuse,
but allow calls to increase the number of args to 32.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
[PMD: Split patch in two]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221218211832.73312-3-philmd@linaro.org>
In order to have variable size allocated TCGOp, pass the number
of arguments we use (and would allocate) up to tcg_op_alloc().
This alters tcg_emit_op(), tcg_op_insert_before() and
tcg_op_insert_after() prototypes.
In tcg_op_alloc() ensure the number of arguments is in range.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
[PMD: Extracted from bigger patch]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221218211832.73312-2-philmd@linaro.org>
Better to re-use the existing function for copying ops.
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We copied all of the arguments in copy_op_nocheck.
We only need to replace the one argument that we change.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The function pointer is immediately after the output and input
operands; no need to search.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Narrow the scope of the lock to the actual read/write,
moving the cpu_transation_failed call outside the lock.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Only the system emulation part of TB maintainance uses the
page_collection structure. Restrict its declaration (and the
functions requiring it) to tb-maint.c.
Convert the 'len' argument of tb_invalidate_phys_page_fast__locked()
from signed to unsigned.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20221209093649.43738-6-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20221209093649.43738-5-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Emphasize this function is called with pages locked.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20221209093649.43738-4-philmd@linaro.org>
[rth: Use "__locked" suffix, to match other instances.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Commit d9bb58e510 ("tcg: move tcg related files into accel/tcg/
subdirectory") introduced accel/tcg/trace-events, so we don't
need to use the root trace-events anymore.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20221209093649.43738-3-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Missed in commit 6526919224 ("accel/tcg: Restrict cpu_io_recompile()
from other accelerators").
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20221209093649.43738-2-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The only thing that still touches PageDesc in translate-all.c
are some locking routines related to tb-maint.c which have not
yet been moved. Do so now.
Move some code up in tb-maint.c as well, to untangle the maze
of ifdefs, and allow a sensible final ordering.
Move some declarations from exec/translate-all.h to internal.h,
as they are only used within accel/tcg/.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Now that PageDesc is not used for user-only, and for system
it is only used for tb maintenance, move the implementation
into tb-main.c appropriately ifdefed.
We have not yet eliminated all references to PageDesc for
user-only, so retain a typedef to the structure without definition.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This page tracking implementation is specific to user-only,
since the system softmmu version is in cputlb.c. Move it
out of translate-all.c to user-exec.c.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Make bsd-user match linux-user in not marking host pages
as reserved. This isn't especially effective anyway, as
it doesn't take into account any heap memory that qemu
may allocate after startup.
Reviewed-by: Warner Losh <imp@bsdimp.com>
Tested-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Continue weaning user-only away from PageDesc.
Use an interval tree to record target data.
Chunk the data, to minimize allocation overhead.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Begin weaning user-only away from PageDesc.
Since, for user-only, all TB (and page) manipulation is done with
a single mutex, and there is no virtual/physical discontinuity to
split a TB across discontinuous pages, place all of the TBs into
a single IntervalTree. This makes it trivial to find all of the
TBs intersecting a range.
Retain the existing PageDesc + linked list implementation for
system mode. Move the portion of the implementation that overlaps
the new user-only code behind the common ifdef.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Rename to tb_remove_all, to remove the PageDesc "page" from the name,
and to avoid suggesting a "flush" in the icache sense.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Commit 012d4c96e2 changed the visitor functions taking Error ** to
return bool instead of void, and the commits following it used the new
return value to simplify error checking. Since then a few more uses
in need of the same treatment crept in. Do that. All pretty
mechanical except for
* balloon_stats_get_all()
This is basically the same transformation commit 012d4c96e2 applied
to the virtual walk example in include/qapi/visitor.h.
* set_max_queue_size()
Additionally replace "goto end of function" by return.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20221121085054.683122-10-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Isolate the code protected by setjmp. Fixes:
translate-all.c: In function ‘tb_gen_code’:
translate-all.c:748:51: error: argument ‘cflags’ might be clobbered by ‘longjmp’ or ‘vfork’ [-Werror=clobbered]
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
if QEMU is configured with modules enabled, it is possible that the
load of an accelerator module will fail.
Exit in this case, relying on module_object_class_by_name to report
the specific load error if any.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[claudio: changed abort() to exit(1)]
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20220929093035.4231-6-cfontana@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Delay cpu_list_add until realize is complete, so that cross-cpu
interaction does not happen with incomplete cpu state. For this,
we must delay plugin initialization out of tcg_exec_realizefn,
because no cpu_index has been assigned.
Fixes a problem with cross-cpu jump cache flushing, when the
jump cache has not yet been allocated.
Fixes: a976a99a29 ("include/hw/core: Create struct CPUJumpCache")
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reported-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The value passed is always true, and if the target's
synchronize_from_tb hook is non-trivial, not exiting
may be erroneous.
Reviewed-by: Claudio Fontana <cfontana@suse.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add a way to examine the unwind data without actually
restoring the data back into env.
Reviewed-by: Claudio Fontana <cfontana@suse.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Currently signal SIGIPI [=SIGUSR1] is used to kick the dummy CPU
when qtest accelerator is used. However SIGUSR1 is unsupported on
Windows. To support Windows, we add a QemuSemaphore CPUState::sem
to kick the dummy CPU instead for Windows.
Signed-off-by: Xuzhou Cheng <xuzhou.cheng@windriver.com>
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20221028045736.679903-2-bin.meng@windriver.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
All targets have been updated. Use the tcg_ops target hook
exclusively, which allows the compat code to be removed.
Reviewed-by: Claudio Fontana <cfontana@suse.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add a tcg_ops hook to replace the restore_state_to_opc
function call. Because these generic hooks cannot depend
on target-specific types, temporarily, copy the current
target_ulong data[] into uint64_t d64[].
Reviewed-by: Claudio Fontana <cfontana@suse.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Since the only user, Arm MTE, always requires allocation,
merge the get and alloc functions to always produce a
non-null result. Also assume that the user has already
checked page validity.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Since "target data" is always user-only, move it out of
translate-all.c to user-exec.c.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Flush translation blocks in bulk, rather than page-by-page.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use the existing function for clearing target data.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
When PAGE_RESET is set, we are replacing pages with new
content, which means that we need to invalidate existing
cached data, such as TranslationBlocks. Perform the
reset invalidate while we're doing other invalidates,
which allows us to remove the separate invalidates from
the user-only mmap/munmap/mprotect routines.
In addition, restrict invalidation to PAGE_EXEC pages.
Since cdf7130851, we have validated PAGE_EXEC is present
before translation, which means we can assume that if the
bit is not present, there are no translations to invalidate.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We do not require detection of overlapping TBs here,
so use the more appropriate function.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We missed this function when we introduced tb_page_addr_t.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This function is is never called with a real range,
only for a single page. Drop the second parameter
and rename to tb_invalidate_phys_page.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Rename to tb_invalidate_phys_page_unwind to emphasize that
we also detect invalidating the current TB, and also to free
up that name for other usage.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This data structure will be replaced for user-only: add accessors.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
When we added the fast path, we initialized page_addr[] early.
These stores in and around tb_page_add() are redundant; remove them.
Fixes: 50627f1b7b ("accel/tcg: Add fast path for translator_ld*")
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The results of the calls to cpu_get_tb_cpu_state,
current_{pc,cs_base,flags}, are not used.
In tb_invalidate_phys_page, use bool for current_tb_modified.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
There are no users outside of accel/tcg; this function
does not need to be defined in exec-all.h.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Move all of the TranslationBlock flushing and page linking
code from translate-all.c to tb-maint.c.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
These items printf, and could be replaced with proper
tracepoints if we really cared.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use a constant target data allocation size for all pages.
This will be necessary to reduce overhead of page tracking.
Since TARGET_PAGE_DATA_SIZE is now required, we can use this
to omit data tracking for targets that don't require it.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Profiling QEMU during Fedora 35 for PPC64 boot revealed that a
considerable amount of time was being spent in
check_for_breakpoints() (0.61% of total time on PPC64 and 2.19% on
amd64), even though it was just checking that its queue was empty
and returning, when no breakpoints were set. It turns out this
function is not inlined by the compiler and it's always called by
helper_lookup_tb_ptr(), one of the most called functions.
By leaving only the check for empty queue in
check_for_breakpoints() and moving the remaining code to
check_for_breakpoints_slow(), called only when the queue is not
empty, it's possible to avoid the call overhead. An improvement of
about 3% in total time was measured on POWER9.
Signed-off-by: Leandro Lupori <leandro.lupori@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221025202424.195984-2-leandro.lupori@eldorado.org.br>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Commit a82fd5a4ec was intended to be a code cleanup, but
unfortunately it has a bug. It moves the initialization of the
TCG cflags from the "start a new vcpu" function to the
thread handler; this is fine when each vcpu has its own thread,
but when we are doing round-robin of vcpus on a single thread
we end up only initializing the cflags for CPU 0, not for any
of the others.
The most obvious effect of this bug is that running in icount
mode with more than one CPU is broken; typically the guest
hangs shortly after it brings up the secondary CPUs.
This reverts commit a82fd5a4ec.
Cc: qemu-stable@nongnu.org
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20221021163409.3674911-1-peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
There are cases that malicious virtual machine can cause CPU stuck (due
to event windows don't open up), e.g., infinite loop in microcode when
nested #AC (CVE-2015-5307). No event window means no event (NMI, SMI and
IRQ) can be delivered. It leads the CPU to be unavailable to host or
other VMs. Notify VM exit is introduced to mitigate such kind of
attacks, which will generate a VM exit if no event window occurs in VM
non-root mode for a specified amount of time (notify window).
A new KVM capability KVM_CAP_X86_NOTIFY_VMEXIT is exposed to user space
so that the user can query the capability and set the expected notify
window when creating VMs. The format of the argument when enabling this
capability is as follows:
Bit 63:32 - notify window specified in qemu command
Bit 31:0 - some flags (e.g. KVM_X86_NOTIFY_VMEXIT_ENABLED is set to
enable the feature.)
Users can configure the feature by a new (x86 only) accel property:
qemu -accel kvm,notify-vmexit=run|internal-error|disable,notify-window=n
The default option of notify-vmexit is run, which will enable the
capability and do nothing if the exit happens. The internal-error option
raises a KVM internal error if it happens. The disable option does not
enable the capability. The default value of notify-window is 0. It is valid
only when notify-vmexit is not disabled. The valid range of notify-window
is non-negative. It is even safe to set it to zero since there's an
internal hardware threshold to be added to ensure no false positive.
Because a notify VM exit may happen with VM_CONTEXT_INVALID set in exit
qualification (no cases are anticipated that would set this bit), which
means VM context is corrupted. It would be reflected in the flags of
KVM_EXIT_NOTIFY exit. If KVM_NOTIFY_CONTEXT_INVALID bit is set, raise a KVM
internal error unconditionally.
Acked-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Chenyi Qiang <chenyi.qiang@intel.com>
Message-Id: <20220929072014.20705-5-chenyi.qiang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Expose struct KVMState out of kvm-all.c so that the field of struct
KVMState can be accessed when defining target-specific accelerator
properties.
Signed-off-by: Chenyi Qiang <chenyi.qiang@intel.com>
Message-Id: <20220929072014.20705-4-chenyi.qiang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Several hypervisor capabilities in KVM are target-specific. When exposed
to QEMU users as accelerator properties (i.e. -accel kvm,prop=value), they
should not be available for all targets.
Add a hook for targets to add their own properties to -accel kvm, for
now no such property is defined.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220929072014.20705-3-chenyi.qiang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This removes the final hard coding of kvm_enabled() in gdbstub and
moves the check to an AccelOps.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Mads Ynddal <mads@ynddal.dk>
Message-Id: <20220929114231.583801-46-alex.bennee@linaro.org>
As HW virtualization requires specific support to handle breakpoints
lets push out special casing out of the core gdbstub code and into
AccelOpsClass. This will make it easier to add other accelerator
support and reduces some of the stub shenanigans.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Mads Ynddal <mads@ynddal.dk>
Message-Id: <20220929114231.583801-45-alex.bennee@linaro.org>
The support of single-stepping is very much dependent on support from
the accelerator we are using. To avoid special casing in gdbstub move
the probing out to an AccelClass function so future accelerators can
put their code there.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Mads Ynddal <mads@ynddal.dk>
Message-Id: <20220929114231.583801-44-alex.bennee@linaro.org>
Prepare for targets to be able to produce TBs that can
run in more than one virtual context.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The availability of tb->pc will shortly be conditional.
Introduce accessor functions to minimize ifdefs.
Pass around a known pc to places like tcg_gen_code,
where the caller must already have the value.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Wrap the bare TranslationBlock pointer into a structure.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This function has two users, who use it incompatibly.
In tlb_flush_page_by_mmuidx_async_0, when flushing a
single page, we need to flush exactly two pages.
In tlb_flush_range_by_mmuidx_async_0, when flushing a
range of pages, we need to flush N+1 pages.
This avoids double-flushing of jmp cache pages in a range.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Let tb->page_addr[0] contain the address of the first byte of the
translated block, rather than the address of the page containing the
start of the translated block. We need to recover this value anyway
at various points, and it is easier to discard a page offset when it
is not needed, which happens naturally via the existing find_page shift.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use the pc coming from db->pc_first rather than the TB.
Use the cached host_addr rather than re-computing for the
first page. We still need a separate lookup for the second
page because it won't be computed for DisasContextBase until
the translator actually performs a read from the page.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Bool is more appropriate type for the alloc parameter.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This bitmap is created and discarded immediately.
We gain nothing by its existence.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220822232338.1727934-2-richard.henderson@linaro.org>
Now that we have collected all of the page data into
CPUTLBEntryFull, provide an interface to record that
all in one go, instead of using 4 arguments. This interface
allows CPUTLBEntryFull to be extended without having to
change the number of arguments.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add an interface to return the CPUTLBEntryFull struct
that goes with the lookup. The result is not intended
to be valid across multiple lookups, so the user must
use the results immediately.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
When PAGE_WRITE_INV is set when calling tlb_set_page,
we immediately set TLB_INVALID_MASK in order to force
tlb_fill to be called on the next lookup. Here in
probe_access_internal, we have just called tlb_fill
and eliminated true misses, thus the lookup must be valid.
This allows us to remove a warning comment from s390x.
There doesn't seem to be a reason to change the code though.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This field is only written, not read; remove it.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This structure will shortly contain more than just
data for accessing MMIO. Rename the 'addr' member
to 'xlat_section' to more clearly indicate its purpose.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Before: 35.912 s ± 0.168 s
After: 35.565 s ± 0.087 s
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220811151413.3350684-5-alex.bennee@linaro.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220923084803.498337-5-clg@kaod.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This is a follow-up for commit 892a4f6a75 ("linux-user: Add partial
support for MADV_DONTNEED"), which added passthrough for anonymous
mappings. File mappings can be handled in a similar manner.
In order to do that, mark pages, for which mmap() was passed through,
with PAGE_PASSTHROUGH, and then allow madvise() passthrough for these
pages. Drop the explicit PAGE_ANON check, since anonymous mappings are
expected to have PAGE_PASSTHROUGH anyway.
Add PAGE_PASSTHROUGH to PAGE_STICKY in order to keep it on mprotect().
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220725125043.43048-1-iii@linux.ibm.com>
Message-Id: <20220906000839.1672934-5-iii@linux.ibm.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reported by Coverity as CID 1490142. Since the size is constant and the
lifetime is the same as the StatsDescriptors struct, embed the struct
directly instead of using a separate allocation.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The following scenario can happen if QEMU sets more RESET flags while
the KVM_RESET_DIRTY_RINGS ioctl is ongoing on another host CPU:
CPU0 CPU1 CPU2
------------------------ ------------------ ------------------------
fill gfn0
store-rel flags for gfn0
fill gfn1
store-rel flags for gfn1
load-acq flags for gfn0
set RESET for gfn0
load-acq flags for gfn1
set RESET for gfn1
do ioctl! ----------->
ioctl(RESET_RINGS)
fill gfn2
store-rel flags for gfn2
load-acq flags for gfn2
set RESET for gfn2
process gfn0
process gfn1
process gfn2
do ioctl!
etc.
The three load-acquire in CPU0 synchronize with the three store-release
in CPU2, but CPU0 and CPU1 are only synchronized up to gfn1 and CPU1
may miss gfn2's fields other than flags.
The kernel must be able to cope with invalid values of the fields, and
userspace *will* invoke the ioctl once more. However, once the RESET flag
is cleared on gfn2, it is lost forever, therefore in the above scenario
CPU1 must read the correct value of gfn2's fields.
Therefore RESET must be set with a store-release, that will synchronize
with KVM's load-acquire in CPU1.
Cc: Gavin Shan <gshan@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Cache the translation from guest to host address, so we may
use direct loads when we hit on the primary translation page.
Look up the second translation page only once, during translation.
This obviates another lookup of the second page within tb_gen_code
after translation.
Fixes a bug in that plugin_insn_append should be passed the bytes
in the original memory order, not bswapped by pieces.
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Pass these along to translator_loop -- pc may be used instead
of tb->pc, and host_pc is currently unused. Adjust all targets
at one time.
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
It was non-obvious to me why we can raise an exception in
the middle of a comparison function, but it works.
While nearby, use TARGET_PAGE_ALIGN instead of open-coding.
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Simplify the implementation of get_page_addr_code_hostp
by reusing the existing probe_access infrastructure.
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The base qemu_ram_addr_from_host function is already in
softmmu/physmem.c; move the nofail version to be adjacent.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The function is not used outside of cpu-exec.c. Move it and
its subroutines up in the file, before the first use.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The mmap_lock is held around tb_gen_code. While the comment
is correct that the lock is dropped when tb_gen_code runs out
of memory, the lock is *not* dropped when an exception is
raised reading code for translation.
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The current implementation is a no-op, simply returning addr.
This is incorrect, because we ought to be checking the page
permissions for execution.
Make get_page_addr_code inline for both implementations.
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The KVM_DIRTY_GFN_F_DIRTY flag ensures that the entry is valid. If
the read of the fields are not ordered after the read of the flag,
QEMU might see stale values.
Cc: Gavin Shan <gshan@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-M none creates a guest without a vCPU, causing the following error:
$ ./qemu-system-x86_64 -qmp stdio -M none -accel kvm
{execute:qmp_capabilities}
{"return": {}}
{execute: query-stats-schemas}
Segmentation fault (core dumped)
Fix it by not querying the vCPU stats if first_cpu is NULL.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
aarch64 stores MTE tags in target_date, and they should be reset by
MADV_DONTNEED.
Signed-off-by: Vitaly Buka <vitalybuka@google.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220711220028.2467290-1-vitalybuka@google.com>
[lv: fix code style issues]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The function icount_prepare_for_run() is called with the iothread
unlocked, but it can call icount_notify_aio_contexts() which will
run qemu timer handlers. Those are supposed to be run only with
the iothread lock held, so take the lock while we do that.
Since icount mode runs everything on a single thread anyway,
not holding the lock is likely mostly not going to introduce
races, but it can cause us to trip over assertions that we
do hold the lock, such as the one reported in issue 1130.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1130
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Message-id: 20220801164527.3134765-1-peter.maydell@linaro.org
perror() is designed to append the decoded errno value to a
string. This, however, only makes sense if we called something that
actually sets errno prior to that.
For the callers that check for split irqchip support that is not the
case, and we end up with confusing error messages that end in
"success". Use error_report() instead.
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20220728142446.438177-1-cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Coverity complains that there is a codepath in the query_stats()
function where it can leak the memory pointed to by stats_list. This
can only happen if the caller passes something other than
STATS_TARGET_VM or STATS_TARGET_VCPU as the 'target', which no
callsite does. Enforce this assumption using g_assert_not_reached(),
so that if we have a future bug we hit the assert rather than
silently leaking memory.
Resolves: Coverity CID 1490140
Fixes: cc01a3f4ca ("kvm: Support for querying fd-based stats")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220719134853.327059-1-peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Setup a negative feedback system when vCPU thread
handling KVM_EXIT_DIRTY_RING_FULL exit by introducing
throttle_us_per_full field in struct CPUState. Sleep
throttle_us_per_full microseconds to throttle vCPU
if dirtylimit is in service.
Signed-off-by: Hyman Huang(黄勇) <huangy81@chinatelecom.cn>
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-Id: <977e808e03a1cef5151cae75984658b6821be618.1656177590.git.huangy81@chinatelecom.cn>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Introduce kvm_dirty_ring_size util function to help calculate
dirty ring ful time.
Signed-off-by: Hyman Huang(黄勇) <huangy81@chinatelecom.cn>
Acked-by: Peter Xu <peterx@redhat.com>
Message-Id: <f9ce1f550bfc0e3a1f711e17b1dbc8f701700e56.1656177590.git.huangy81@chinatelecom.cn>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Add a non-required argument 'CPUState' to kvm_dirty_ring_reap so
that it can cover single vcpu dirty-ring-reaping scenario.
Signed-off-by: Hyman Huang(黄勇) <huangy81@chinatelecom.cn>
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-Id: <c32001242875e83b0d9f78f396fe2dcd380ba9e8.1656177590.git.huangy81@chinatelecom.cn>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The next version of Linux will introduce boolean statistics, which
can only have 0 or 1 values. Convert them to the new QAPI fields
added in the previous commit.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The documentation for PROT_MTE says that it cannot be cleared
by mprotect. Further, the implementation of the VM_ARCH_CLEAR bit,
contains PROT_BTI confiming that bit should be cleared.
Introduce PAGE_TARGET_STICKY to allow target/arch/cpu.h to control
which bits may be reset during page_set_flags. This is sort of the
opposite of VM_ARCH_CLEAR, but works better with qemu's PAGE_* bits
that are separate from PROT_* bits.
Reported-by: Vitaly Buka <vitalybuka@google.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220711031420.17820-1-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* fix cross compilation CFLAGS and compiler choice
* do not specify -bios option for tests/vm
* miscellaneous fixes
* preparation for pre-install tree in the build directory (Akihiko)
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmLNbVcUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroO1KggArZDxqEOyTCvsu2H1Bf7j2J4Mfx2k
+8FiDNpdfnmpQIc8KnQHZN7QKodXhaPwShoK6NZPYeAbg62n5/RUlF+fj2DbdCN0
udBqt9V5dmjF2S+vb2++pWSpEUpqH1yAVYX3t0MvQDkfscADYYqYndHkYqVP34Sy
sIIkDGdFODQqHCPDmNNFWFHt8X5Zu8t5j53NjPebdryZBDiA4DgFnorTw0sTPV1H
XeS2M06C1lkGyWrdy7eaF9IL3tmlCsuc6xiA0RAhzJiWgHe1LQZOUPMfR+GKuidI
E9Cz05iGyOlH+CNYgdukqT8BdJtcjWZwDgYWVxVIswv461h/asoENUIx1g==
=Nyzq
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
* fuzzing fixes (Alexander)
* fix cross compilation CFLAGS and compiler choice
* do not specify -bios option for tests/vm
* miscellaneous fixes
* preparation for pre-install tree in the build directory (Akihiko)
# gpg: Signature made Tue 12 Jul 2022 13:47:19 BST
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu:
meson: place default firmware path under .../share
qga: Relocate a path emitted in the help text
build: Do not depend on pc-bios for config-host.mak
accel: kvm: Fix memory leak in find_stats_descriptors
audio/dbus: fix building
fuzz: only use generic-fuzz targets on oss-fuzz
build: improve -fsanitize-coverage-allowlist check
build: try both native and cross compilers
configure: pass whole target name to probe_target_compiler
tests/tcg: compile system emulation tests as freestanding
configure: write EXTRA_CFLAGS for all sub-Makefiles
configure: allow more host/target combos to use the host compiler
configure, pc-bios/vof: pass cross CFLAGS correctly
configure, pc-bios/s390-ccw: pass cross CFLAGS correctly
configure, pc-bios/optionrom: pass cross CFLAGS correctly
pc-bios/optionrom: use -m16 unconditionally
scsi/lsi53c895a: fix use-after-free in lsi_do_msgout (CVE-2022-0216)
tests/vm: do not specify -bios option
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
# Conflicts:
# pc-bios/s390-ccw/netboot.mak
If low-address-protection is active, unaligned stores to non-protected
parts of lowcore lead to protection exceptions. The reason is that in
such cases tlb_fill() call in store_helper_unaligned() covers
[0, addr + size) range, which contains the protected portion of
lowcore. This range is too large.
The most straightforward fix would be to make sure we stay within the
original [addr, addr + size) range. However, if an unaligned access
affects a single page, we don't need to call tlb_fill() in
store_helper_unaligned() at all, since it would be identical to
the previous tlb_fill() call in store_helper(), and therefore a no-op.
If an unaligned access covers multiple pages, this situation does not
occur.
Therefore simply skip TLB handling in store_helper_unaligned() if we
are dealing with a single page.
Fixes: 2bcf018340 ("s390x/tcg: low-address protection support")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20220711185640.3558813-2-iii@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This function doesn't release descriptors in one error path,
result in memory leak. Call g_free() to release it.
Fixes: cc01a3f4ca ("kvm: Support for querying fd-based stats")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Message-Id: <20220624063159.57411-1-linmq006@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We need to fetch the name of the current accelerator in flexible error
messages more going forward. Let's create a helper that gives it to us
without casting in the target code.
Signed-off-by: Alexander Graf <agraf@csgraf.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220620192242.70573-1-agraf@csgraf.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reorg TCG AccelOpsClass initialization to emphasis icount
mode share more code with single-threaded TCG.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220323171751.78612-7-philippe.mathieu.daude@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Allow retrieving only a subset of statistics. This can be useful
for example in order to plot a subset of the statistics many times
a second: KVM publishes ~40 statistics for each vCPU on x86; retrieving
and serializing all of them would be useless.
Another use will be in HMP in the following patch; implementing the
filter in the backend is easy enough that it was deemed okay to make
this a public interface.
Example:
{ "execute": "query-stats",
"arguments": {
"target": "vcpu",
"vcpus": [ "/machine/unattached/device[2]",
"/machine/unattached/device[4]" ],
"providers": [
{ "provider": "kvm",
"names": [ "l1d_flush", "exits" ] } } }
{ "return": {
"vcpus": [
{ "path": "/machine/unattached/device[2]"
"providers": [
{ "provider": "kvm",
"stats": [ { "name": "l1d_flush", "value": 41213 },
{ "name": "exits", "value": 74291 } ] } ] },
{ "path": "/machine/unattached/device[4]"
"providers": [
{ "provider": "kvm",
"stats": [ { "name": "l1d_flush", "value": 16132 },
{ "name": "exits", "value": 57922 } ] } ] } ] } }
Extracted from a patch by Mark Kanda.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Allow retrieving the statistics from a specific provider only.
This can be used in the future by HMP commands such as "info
sync-profile" or "info profile". The next patch also adds
filter-by-provider capabilities to the HMP equivalent of
query-stats, "info stats".
Example:
{ "execute": "query-stats",
"arguments": {
"target": "vm",
"providers": [
{ "provider": "kvm" } ] } }
The QAPI is a bit more verbose than just a list of StatsProvider,
so that it can be subsequently extended with filtering of statistics
by name.
If a provider is specified more than once in the filter, each request
will be included separately in the output.
Extracted from a patch by Mark Kanda.
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Introduce a simple filtering of statistics, that allows to retrieve
statistics for a subset of the guest vCPUs. This will be used for
example by the HMP monitor, in order to retrieve the statistics
for the currently selected CPU.
Example:
{ "execute": "query-stats",
"arguments": {
"target": "vcpu",
"vcpus": [ "/machine/unattached/device[2]",
"/machine/unattached/device[4]" ] } }
Extracted from a patch by Mark Kanda.
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add support for querying fd-based KVM stats - as introduced by Linux kernel
commit:
cb082bfab59a ("KVM: stats: Add fd-based API to read binary stats data")
This allows the user to analyze the behavior of the VM without access
to debugfs.
Signed-off-by: Mark Kanda <mark.kanda@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
dump_opcount_info() is a one-line wrapper around tcg_dump_op_count()
which is also exported. So use the latter directly.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20220520180109.8224-10-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Commit 3a841ab53f 'qapi: introduce
x-query-jit QMP command' basically moved the only function using
dump_drift_info() to cpu-exec.c. Therefore, dump_drift_info() doesn't
need to be exported any longer.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20220520180109.8224-9-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
We have about 30 instances of the typo/variant spelling 'writeable',
and over 500 of the more common 'writable'. Standardize on the
latter.
Change produced with:
sed -i -e 's/\([Ww][Rr][Ii][Tt]\)[Ee]\([Aa][Bb][Ll][Ee]\)/\1\2/g' $(git grep -il writeable)
and then hand-undoing the instance in linux-headers/linux/kvm.h.
Most of these changes are in comments or documentation; the
exceptions are:
* a local variable in accel/hvf/hvf-accel-ops.c
* a local variable in accel/kvm/kvm-all.c
* the PMCR_WRITABLE_MASK macro in target/arm/internals.h
* the EPT_VIOLATION_GPA_WRITABLE macro in target/i386/hvf/vmcs.h
(which is never used anywhere)
* the AR_TYPE_WRITABLE_MASK macro in target/i386/hvf/vmx.h
(which is never used anywhere)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Message-id: 20220505095015.2714666-1-peter.maydell@linaro.org
This patch decouples checkpoints and async events.
It was a tricky part of replay implementation. Now it becomes
much simpler and easier to maintain.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <165364837856.688121.8785039478408995979.stgit@pasha-ThinkPad-X280>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Header guard symbols should match their file name to make guard
collisions less likely.
Cleaned up with scripts/clean-header-guards.pl, followed by some
renaming of new guard symbols picked by the script to better ones.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20220506134911.2856099-2-armbru@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[Change to generated file ebpf/rss.bpf.skeleton.h backed out]
Coverity reports out-of-bound accesses within cputlb.c.
This should be a false positive due to how the index is
decoded from MemOpIdx. To be fair, nothing is checking
the correct bounds during encoding either.
Assert index in range before use, both to catch user errors
and to pacify static analysis.
Fixes: Coverity CID 1487120, 1487127, 1487170, 1487196, 1487215, 1487238
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220401170813.318609-1-richard.henderson@linaro.org>
G_NORETURN was introduced in glib 2.68, fallback to G_GNUC_NORETURN in
glib-compat.
Note that this attribute must be placed before the function declaration
(bringing a bit of consistency in qemu codebase usage).
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Message-Id: <20220420132624.2439741-20-marcandre.lureau@redhat.com>
The last use of this macro was removed in f3e182b100
("accel/tcg: Push trace info building into atomic_common.c.inc")
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
