Add a q35 property to check whether or not SMM ranges, e.g. SMRAM, TSEG,
etc... exist for the target platform. TDX doesn't support SMM and doesn't
play nice with QEMU modifying related guest memory ranges.
Signed-off-by: Isaku Yamahata <isaku.yamahata@linux.intel.com>
Co-developed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Message-ID: <20240320083945.991426-19-michael.roth@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The Astro/Elroy chip can work in either Hard-Fail or Soft-Fail mode.
Hard fail means the system bus will send an HPMC (=crash) to the
processor, soft fail means the system bus will ignore timeouts of
MMIO-reads or MMIO-writes and return -1ULL.
The HF mode is controlled by a bit in the status register and is usually
programmed by the OS. Return the corresponing values based on the current
value of that bit.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
ACPI DSDT generator needs information like ECAM range, PIO range, 32-bit
and 64-bit PCI MMIO range etc related to the PCI host bridge. Instead of
making these values machine specific, create properties for the GPEX
host bridge with default value 0. During initialization, the firmware
can initialize these properties with correct values for the platform.
This basically allows DSDT generator code independent of the machine
specific memory map accesses.
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20231218150247.466427-11-sunilvl@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add new XSCOM registers introduced in PHB5.
Apply bit-masks within xscom-write methods.
Bit-masks specified using PPC_BITMASK macro.
Signed-off-by: Saif Abrar <saif.abrar@linux.vnet.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Message-ID: <20231016175948.10869-1-saif.abrar@linux.vnet.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The Articia S is a generic chipset supporting several different CPUs
that were among others used on some PPC boards. This is a minimal
emulation of the parts needed for emulating the AmigaOne board.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Tested-by: Rene Engel <ReneEngel80@emailn.de>
Acked-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-ID: <83822787431701cf4d460298d3e3845f362e5da1.1698406922.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The 64-bit PA-RISC machines use a Astro system bus adapter (SBA)
with Elroy PCI host chips.
Later generation Astro chips were named Pluto, Ike and REO.
Signed-off-by: Helge Deller <deller@gmx.de>
NVLink2 support was removed from the PPC PowerNV platform and VFIO in
Linux 5.13 with commits :
562d1e207d32 ("powerpc/powernv: remove the nvlink support")
b392a1989170 ("vfio/pci: remove vfio_pci_nvlink2")
This was 2.5 years ago. Do the same in QEMU with a revert of commit
ec132efaa8 ("spapr: Support NVIDIA V100 GPU with NVLink2"). Some
adjustements are required on the NUMA part.
Cc: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Message-ID: <20230918091717.149950-1-clg@kaod.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
i440fx_init() is a legacy init function. The previous patches worked towards
TYPE_I440FX_PCI_HOST_BRIDGE to be instantiated the QOM way. Do this now by
transforming the parameters passed to i440fx_init() into property assignments.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20230630073720.21297-17-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
I440FX needs a different PCI device model if the "igd-passthru" property is
enabled. The type name is currently passed as a parameter to i440fx_init(). This
parameter will be replaced by a property assignment once i440fx_init() gets
resolved.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20230630073720.21297-16-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Introduce the properties in anticipation of QOM'ification; Q35 has the same
properties.
Note that we want to avoid a "ram size" property in the QOM interface since it
seems redundant to both properties introduced in this change. Thus the removal
of the ram_size parameter. We assume the invariant of both properties to sum up
to "ram size" which is already asserted in pc_memory_init(). Under Xen the
invariant seems to hold as well, so we now also check it there.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20230630073720.21297-15-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The goal is to eliminate i440fx_init() which is a legacy init function. This
neccessitates the memory regions to be properties, like in Q35, which will be
assigned in board code.
Since i440fx needs different PCI devices in Xen mode, and since i440fx shall
be self-contained, the PCI device will be created during realization of the
host. Thus the pointers need to be moved to the host structure to be usable as
properties.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230630073720.21297-13-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20230630073720.21297-7-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Unlike pam_update() which takes the subject -- PAMMemoryRegion -- as
first argument, init_pam() takes it as fifth (!) argument. This makes it
quite hard to figure out what an init_pam() invocation actually
initializes. By moving the subject to the front this should become
clearer.
While at it, lower the DeviceState parameter to Object, also
communicating more clearly that this parameter is just the owner rather
than some (heavy?) dependency.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230213162004.2797-8-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This queue includes a stub implementation for the dcblc instruction to
avoid an illegal instrunction exception when using u-boot with mpc85xx.
It also includes a PHB fix with user-created pnv-phb devices and
Skiboot.
-----BEGIN PGP SIGNATURE-----
iIwEABYKADQWIQQX6/+ZI9AYAK8oOBk82cqW3gMxZAUCZAJllhYcZGFuaWVsaGI0
MTNAZ21haWwuY29tAAoJEDzZypbeAzFk02YA/2YnJl0aRw6hgiayI2rLbcwQcVfp
oGAhh4QmqFL2UJw2AQDra0kh9sxBSEcqhltNnOa08tBnHPts3W/A8nmFtCd4Cw==
=VRNM
-----END PGP SIGNATURE-----
Merge tag 'pull-ppc-20230303' of https://gitlab.com/danielhb/qemu into staging
ppc patch queue for 2023-03-03:
This queue includes a stub implementation for the dcblc instruction to
avoid an illegal instrunction exception when using u-boot with mpc85xx.
It also includes a PHB fix with user-created pnv-phb devices and
Skiboot.
# -----BEGIN PGP SIGNATURE-----
#
# iIwEABYKADQWIQQX6/+ZI9AYAK8oOBk82cqW3gMxZAUCZAJllhYcZGFuaWVsaGI0
# MTNAZ21haWwuY29tAAoJEDzZypbeAzFk02YA/2YnJl0aRw6hgiayI2rLbcwQcVfp
# oGAhh4QmqFL2UJw2AQDra0kh9sxBSEcqhltNnOa08tBnHPts3W/A8nmFtCd4Cw==
# =VRNM
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 03 Mar 2023 21:24:38 GMT
# gpg: using EDDSA key 17EBFF9923D01800AF2838193CD9CA96DE033164
# gpg: issuer "danielhb413@gmail.com"
# gpg: Good signature from "Daniel Henrique Barboza <danielhb413@gmail.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 17EB FF99 23D0 1800 AF28 3819 3CD9 CA96 DE03 3164
* tag 'pull-ppc-20230303' of https://gitlab.com/danielhb/qemu:
pnv_phb4_pec: Simplify/align code to parent user-created PHBs
pnv_phb4_pec: Move pnv_phb4_get_pec() to rightful file
pnv_phb4_pec: Only export existing PHBs to the device tree
pnv_phb4_pec: Keep track of instantiated PHBs
target/ppc/translate: Add dummy implementation for dcblc instruction
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When instantiating a user-created PHB on P9/P10, we don't really have
a reason any more to go through an indirection in pnv_chip_add_phb()
in pnv.c, we can go straight to the right function in
pnv_phb4_pec.c. That way, default PHBs and user-created PHBs are all
handled in the same file. This patch also renames pnv_phb4_get_pec()
to pnv_pec_add_phb() to better reflect that it "hooks" a PHB to a PEC.
For P8, the PHBs are parented to the chip directly, so it makes sense
to keep calling pnv_chip_add_phb() in pnv.c, to also be consistent
with where default PHBs are handled. The only change here is that,
since that function is now only used for P8, we can refine the return
type.
So overall, the PnvPHB front-end now has a pnv_phb_user_get_parent()
function which handles the parenting of the user-created PHBs by
calling the right function in the right file based on the processor
version. It's also easily extensible if we ever need to support a
different parent object.
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Message-Id: <20230302163715.129635-5-fbarrat@linux.ibm.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The function pnv_phb4_get_pec() exposes some internals of the PEC and
PHB logic, yet it was in the higher level hw/ppc/pnv.c file for
historical reasons: P8 implements the PHBs from pnv.c directly, but on
P9/P10, it's done through the CEC model, which has its own file. So
move pnv_phb4_get_pec() to hw/pci-host/pnv_phb4_pec.c, where it fits
naturally.
While at it, replace the PnvPHB4 parameter by the PnvPHB front-end,
since it has all the information needed and simplify it a bit.
No functional changes.
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Message-Id: <20230302163715.129635-4-fbarrat@linux.ibm.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Add an array on the PEC object to keep track of the PHBs which are
instantiated. The array can be sparsely populated when using
user-created PHBs. It will be useful for the next patch to only export
instantiated PHBs in the device tree.
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Message-Id: <20230302163715.129635-2-fbarrat@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
In theory gsi base can start from 0 on loongarch virt machine,
however gsi base is hard-coded in linux kernel loongarch system,
else system fails to boot.
This patch renames macro PCH_PIC_IRQ_OFFSET with VIRT_GSI_BASE,
keeps value unchanged. GSI base is common concept in acpi spec
and easy to understand.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20221228030719.991878-1-maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Update register value per its P10 DD2 definition.
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20230127122848.550083-4-fbarrat@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
PNV_PHB5_DEVICE_ID is defined in two different headers. The definition
in hw/pci-host/pnv_phb4.h was left out in a previous rework.
Remaining definition is in hw/pci-host/pnv_phb.h.
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20230127122848.550083-3-fbarrat@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
PnvChip is typedef'ed in five places, and PnvPhb4PecState in two.
Keep one, drop the others.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20221222104628.659681-5-armbru@redhat.com>
The next commit needs to include hw/ppc/pnv.h from
hw/pci-host/pnv_phb.h. Avoid an inclusion loop.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20221222104628.659681-4-armbru@redhat.com>
Declare the TYPE_BONITO_PCI_HOST_BRIDGE QOM type in a
header to be able to access it from board code.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230105130710.49264-8-philmd@linaro.org>
PCIDeviceClass and PCIDevice are defined in pci.h. Many users of the
header don't actually need them. Similar structs live in their own
headers: PCIBusClass and PCIBus in pci_bus.h, PCIBridge in
pci_bridge.h, PCIHostBridgeClass and PCIHostState in pci_host.h,
PCIExpressHost in pcie_host.h, and PCIERootPortClass, PCIEPort, and
PCIESlot in pcie_port.h.
Move PCIDeviceClass and PCIDeviceClass to new pci_device.h, along with
the code that needs them. Adjust include directives.
This also enables the next commit.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20221222100330.380143-6-armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
hw/pci/pci_bridge.h and hw/cxl/cxl.h include each other.
Fortunately, breaking the loop is merely a matter of deleting
unnecessary includes from headers, and adding them back in places
where they are now missing.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20221222100330.380143-2-armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Change the default irq number of pch pic to 32, so that the irq
number of pch msi is 224(256 - 32), and move the 'PCH_PIC_IRQ_NUM'
macro to pci-host/ls7a.h and add prefix 'VIRT' on it to keep standard
format.
Signed-off-by: Tianrui Zhao <zhaotianrui@loongson.cn>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230104020518.2564263-4-zhaotianrui@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
This patch adds irq number property for loongarch msi interrupt
controller, and remove hard coding irq number macro.
Signed-off-by: Tianrui Zhao <zhaotianrui@loongson.cn>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230104020518.2564263-2-zhaotianrui@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Add new items into LoongArch FDT, including rtc and uart info.
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20221028014007.2718352-3-yangxiaojuan@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Add platform bus support and add the bus information such as address,
size, irq number to FDT table.
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Acked-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20220908094623.73051-5-yangxiaojuan@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
The same rationale provided in the PHB3 bus case applies here.
Note: we could have merged both buses in a single object, like we did
with the root ports, and spare some boilerplate. The reason we opted to
preserve both buses objects is twofold:
- there's not user side advantage in doing so. Unifying the root ports
presents a clear user QOL change when we enable user created devices back.
The buses objects, aside from having a different QOM name, is transparent
to the user;
- we leave a door opened in case we want to increase the root port limit
for phb4/5 later on without having to deal with phb3 code.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
Message-Id: <20220811163950.578927-3-danielhb413@gmail.com>
We rely on the phb-id and chip-id, which are PHB properties, to assign
chassis and slot to the root port. For default devices this is no big
deal: the root port is being created under pnv_phb_realize() and the
values are being passed on via the 'index' and 'chip-id' of the
pnv_phb_attach_root_port() helper.
If we want to implement user created root ports we have a problem. The
user created root port will not be aware of which PHB it belongs to,
unless we're willing to violate QOM best practices and access the PHB
via dev->parent_bus->parent. What we can do is to access the root bus
parent bus.
Since we're already assigning the root port as QOM child of the bus, and
the bus is initiated using PHB properties, let's add phb-id and chip-id
as properties of the bus. This will allow us trivial access to them, for
both user-created and default root ports, without doing anything too
shady with QOM.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
Message-Id: <20220811163950.578927-2-danielhb413@gmail.com>
The attribute is unused.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
Message-Id: <20220624084921.399219-11-danielhb413@gmail.com>
The unified pnv-phb-root-port can be used instead. The phb4-root-port
device isn't exposed to the user in any official QEMU release so there's
no ABI breakage in removing it.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
Message-Id: <20220624084921.399219-9-danielhb413@gmail.com>
The unified pnv-phb-root-port can be used in its place. There is no ABI
breakage in doing so because no official QEMU release introduced user
creatable pnv-phb3-root-port devices.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
Message-Id: <20220624084921.399219-8-danielhb413@gmail.com>
Change the parent type of the PnvPHB4 device to TYPE_PARENT since the
PCI bus is going to be initialized by the PnvPHB parent. Functions that
needs to access the bus via a PnvPHB4 object can do so via the
phb4->phb_base pointer.
pnv_phb4_pec now creates a PnvPHB object.
The powernv9 machine class will create PnvPHB devices with version '4'.
powernv10 will create using version '5'. Both are using global machine
properties in their class_init() to do that.
These changes will benefit us when adding PnvPHB user creatable devices
for powernv9 and powernv10.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
Message-Id: <20220624084921.399219-6-danielhb413@gmail.com>
Similar to what we already did for the PnvPHB3 device, let's add a
helper to init the bus when using a PnvPHB4. This helper will be used by
PnvPHb when PnvPHB4 turns into a backend.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
Message-Id: <20220624084921.399219-5-danielhb413@gmail.com>
We need a handful of changes that needs to be done in a single swoop to
turn PnvPHB3 into a PnvPHB backend.
In the PnvPHB3, since the PnvPHB device implements PCIExpressHost and
will hold the PCI bus, change PnvPHB3 parent to TYPE_DEVICE. There are a
couple of instances in pnv_phb3.c that needs to access the PCI bus, so a
phb_base pointer is added to allow access to the parent PnvPHB. The
PnvPHB3 root port will now be connected to a PnvPHB object.
In pnv.c, the powernv8 machine chip8 will now hold an array of PnvPHB
objects. pnv_get_phb3_child() needs to be adapted to return the PnvPHB3
backend from the PnvPHB child. A global property is added in
pnv_machine_power8_class_init() to ensure that all PnvPHBs are created
with phb->version = 3.
After all these changes we're still able to boot a powernv8 machine with
default settings. The real gain will come with user created PnvPHB
devices, coming up next.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
Message-Id: <20220624084921.399219-4-danielhb413@gmail.com>
The PnvPHB3 bus init consists of initializing the pci_io and pci_mmio
regions, registering it via pci_register_root_bus() and then setup the
iommu.
We'll want to init the bus from outside pnv_phb3.c when the bus is
removed from the PnvPHB3 device and put into a new parent PnvPHB device.
The new pnv_phb3_bus_init() helper will be used by the parent to init
the bus when using the PHB3 backend.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
Message-Id: <20220624084921.399219-2-danielhb413@gmail.com>
Change macro name 'LS7A_XXX' to 'VIRT_XXX', as the loongarch
virt machinue use the GPEX bridge instead of LS7A bridge. So
the macro name should keep consistency.
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Message-Id: <20220729073018.27037-3-yangxiaojuan@loongson.cn>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
At the start of pc_memory_init() we usually pass a range of
0..UINT64_MAX as pci_memory, when really its 2G (i440fx) or
32G (q35). To get the real user value, we need to get pci-host
passed property for default pci_hole64_size. Thus to get that,
create the qdev prior to memory init to better make estimations
on max used/phys addr.
This is in preparation to determine that host-phys-bits are
enough and also for pci-hole64-size to be considered to relocate
ram-above-4g to be at 1T (on AMD platforms).
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20220719170014.27028-3-joao.m.martins@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
