If mtmsr L=1 sets MSR[EE] while there is a maskable exception pending,
it does not cause an interrupt. This causes the test case to hang:
https://lists.gnu.org/archive/html/qemu-ppc/2019-10/msg00826.html
More recently, Linux reduced the occurance of operations (e.g., rfi)
which stop translation and allow pending interrupts to be processed.
This started causing hangs in Linux boot in long-running kernel tests,
running with '-d int' shows the decrementer stops firing despite DEC
wrapping and MSR[EE]=1.
https://lists.ozlabs.org/pipermail/linuxppc-dev/2020-April/208301.html
The cause is the broken mtmsr L=1 behaviour, which is contrary to the
architecture. From Power ISA v3.0B, p.977, Move To Machine State Register,
Programming Note states:
If MSR[EE]=0 and an External, Decrementer, or Performance Monitor
exception is pending, executing an mtmsrd instruction that sets
MSR[EE] to 1 will cause the interrupt to occur before the next
instruction is executed, if no higher priority exception exists
Fix this by handling L=1 exactly the same way as L=0, modulo the MSR
bits altered.
The confusion arises from L=0 being "context synchronizing" whereas L=1
is "execution synchronizing", which is a weaker semantic. However this
is not a relaxation of the requirement that these exceptions cause
interrupts when MSR[EE]=1 (e.g., when mtmsr executes to completion as
TCG is doing here), rather it specifies how a pipelined processor can
have multiple instructions in flight where one may influence how another
behaves.
Cc: qemu-stable@nongnu.org
Reported-by: Anton Blanchard <anton@ozlabs.org>
Reported-by: Nathan Chancellor <natechancellor@gmail.com>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20200414111131.465560-1-npiggin@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Since we now use a GByteArray, we can not use stfl_p() directly.
Introduce the gdb_get_float32() helper to load a float32 register.
Fixes: a010bdbe71 ("extend GByteArray to read register helpers")
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200414163853.12164-2-philmd@redhat.com>
Message-Id: <20200414200631.12799-14-alex.bennee@linaro.org>
Introduce gdb_get_zeroes() to fill a GByteArray with zeroes.
Fixes: a010bdbe71 ("extend GByteArray to read register helpers")
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200414102427.7459-1-philmd@redhat.com>
[AJB: used slightly more gliby set_size approach]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200414200631.12799-13-alex.bennee@linaro.org>
We should only pass in gdb_get_reg16() with the GByteArray* object
itself, no need to shift. Without this patch, gdb remote attach will
crash QEMU:
(gdb) target remote :1234
Remote debugging using :1234
Remote communication error. Target disconnected.: Connection reset by peer.
$ qemu-system-x86_64 -m 1G -smp 4 ... -s
ERROR:qemu/gdbstub.c:1843:handle_read_all_regs: assertion failed: (len == gdbserver_state.mem_buf->len)
Bail out! ERROR:qemu/gdbstub.c:1843:handle_read_all_regs: assertion failed: (len == gdbserver_state.mem_buf->len)
Fixes: a010bdbe71 ("extend GByteArray to read register helpers")
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200409164954.36902-3-peterx@redhat.com>
Message-Id: <20200414200631.12799-12-alex.bennee@linaro.org>
Since a010bdbe71 the gdbstub API takes a GByteArray*. Unfortunately
we forgot to update the gdb_get_reg*() calls. Do it now.
Fixes: a010bdbe71 ("extend GByteArray to read register helpers")
Reported-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200409172509.4078-1-philmd@redhat.com>
Message-Id: <20200414200631.12799-11-alex.bennee@linaro.org>
Patch acb9f95a7c "i386: Fix GCC warning with snprintf when HAX
is enabled" replaced Windows device names with posix device
names. Revert this.
Fixes: acb9f95a7c "i386: Fix GCC warning with snprintf when HAX is enabled"
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20200322210211.29603-1-vr_qemu@t-online.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Coverity reported a missing fall through comment, add it.
Fixes: e5918d7d7f ("target/rx: TCG translation")
Reported-by: Coverity (CID 1422222 MISSING_BREAK)
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200403184419.28556-1-philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Rather than dynamically allocate, and risk failing to free
when we longjmp out of the translator, allocate the maximum
buffer size based on the maximum supported instruction length.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Richard Henderson <richard.henderson@linaro.org>
Dynamically allocating a new structure within the DisasContext can
potentially leak as we can longjmp out of the translation loop (see
test_phys_mem). The proper fix would be to use static allocation
within the DisasContext but as the Xtensa translator imports it's code
from elsewhere I leave that as an exercise for the maintainer.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Message-Id: <20200403191150.863-6-alex.bennee@linaro.org>
The KVM FWNMI capability should be enabled with the "ibm,nmi-register"
rtas call. Although MCEs from KVM will be delivered as architected
interrupts to the guest before "ibm,nmi-register" is called, KVM has
different behaviour depending on whether the guest has enabled FWNMI
(it attempts to do more recovery on behalf of a non-FWNMI guest).
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20200325142906.221248-2-npiggin@gmail.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
An old comment in get_phys_addr_lpae() claims that the code does not
support the different format TCR for VTCR_EL2. This used to be true
but it is not true now (in particular the aa64_va_parameters() and
aa32_va_parameters() functions correctly handle the different
register format by checking whether the mmu_idx is Stage2).
Remove the out of date parts of the comment.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200331143407.3186-1-peter.maydell@linaro.org
Our implementation of the PSTATE.PAN bit incorrectly cleared all
access permission bits for privileged access to memory which is
user-accessible. It should only affect the privileged read and write
permissions; execute permission is dealt with via XN/PXN instead.
Fixes: 81636b70c2
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200330170651.20901-1-peter.maydell@linaro.org
While support for parsing ieee_half in the XML description was added
to gdb in 2019 (a6d0f249) there is no easy way for the gdbstub to know
if the gdb end will understand it. Disable it for now and allow older
gdbs to successfully connect to the default -cpu max SVE enabled
QEMUs.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200402143913.24005-1-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Commit 048c95163b ("target/i386: work around KVM_GET_MSRS bug for
secondary execution controls") added a workaround for KVM pre-dating
commit 6defc591846d ("KVM: nVMX: include conditional controls in /dev/kvm
KVM_GET_MSRS") which wasn't setting certain available controls. The
workaround uses generic CPUID feature bits to set missing VMX controls.
It was found that in some cases it is possible to observe hosts which
have certain CPUID features but lack the corresponding VMX control.
In particular, it was reported that Azure VMs have RDSEED but lack
VMX_SECONDARY_EXEC_RDSEED_EXITING; attempts to enable this feature
bit result in QEMU abort.
Resolve the issue but not applying the workaround when we don't have
to. As there is no good way to find out if KVM has the fix itself, use
95c5c7c77c ("KVM: nVMX: list VMX MSRs in KVM_GET_MSR_INDEX_LIST") instead
as these [are supposed to] come together.
Fixes: 048c95163b ("target/i386: work around KVM_GET_MSRS bug for secondary execution controls")
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20200331162752.1209928-1-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The sequence of instructions exposes an issue:
sti
hlt
Interrupts cannot be delivered to hvf after hlt instruction cpu because
HF_INHIBIT_IRQ_MASK is set just before hlt is handled and never reset
after moving instruction pointer beyond hlt.
So, after hvf_vcpu_exec() returns, CPU thread gets locked up forever in
qemu_wait_io_event() (cpu_thread_is_idle() evaluates inhibition
flag and considers the CPU idle if the flag is set).
Cc: Cameron Esfahani <dirty@apple.com>
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Message-Id: <20200328174411.51491-1-r.bolshakov@yadro.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The cpu number reporting is handled by KVM and QEMU only fills in the
VM name, uuid and other values.
Unfortunately KVM doesn't report reserved cpus and doesn't even know
they exist until the are created via the ioctl.
So let's fix up the cpu values after KVM has written its values to the
3.2.2 sysib. To be consistent, we use the same code to retrieve the cpu
numbers as the STSI TCG code in target/s390x/misc_helper.c:HELPER(stsi).
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20200331110123.3774-1-frankja@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Current Icelake-Server CPU model lacks all the features enumerated by
MSR_IA32_ARCH_CAPABILITIES.
Add them, so that guest of "Icelake-Server" can see all of them.
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Message-Id: <20200316095605.12318-1-xiaoyao.li@intel.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The CPUID level need to be set to 0x14 manually on old
machine-type if Intel PT is enabled in guest. E.g. the
CPUID[0].EAX(level)=7 and CPUID[7].EBX[25](intel-pt)=1 when the
Qemu with "-machine pc-i440fx-3.1 -cpu qemu64,+intel-pt" parameter.
Some Intel PT capabilities are exposed by leaf 0x14 and the
missing capabilities will cause some MSRs access failed.
This patch add a warning message to inform the user to extend
the CPUID level.
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Luwei Kang <luwei.kang@intel.com>
Message-Id: <1584031686-16444-1-git-send-email-luwei.kang@intel.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
If the system is numa configured the pkg_offset needs
to be adjusted for EPYC cpu models. Fix it calling the
model specific handler.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <158396725589.58170.16424607815207074485.stgit@naples-babu.amd.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The APIC ID is decoded based on the sequence sockets->dies->cores->threads.
This works fine for most standard AMD and other vendors' configurations,
but this decoding sequence does not follow that of AMD's APIC ID enumeration
strictly. In some cases this can cause CPU topology inconsistency.
When booting a guest VM, the kernel tries to validate the topology, and finds
it inconsistent with the enumeration of EPYC cpu models. The more details are
in the bug https://bugzilla.redhat.com/show_bug.cgi?id=1728166.
To fix the problem we need to build the topology as per the Processor
Programming Reference (PPR) for AMD Family 17h Model 01h, Revision B1
Processors. The documentation is available from the bugzilla Link below.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=206537
It is also available at
https://www.amd.com/system/files/TechDocs/55570-B1_PUB.zip
Here is the text from the PPR.
Operating systems are expected to use Core::X86::Cpuid::SizeId[ApicIdSize], the
number of least significant bits in the Initial APIC ID that indicate core ID
within a processor, in constructing per-core CPUID masks.
Core::X86::Cpuid::SizeId[ApicIdSize] determines the maximum number of cores
(MNC) that the processor could theoretically support, not the actual number of
cores that are actually implemented or enabled on the processor, as indicated
by Core::X86::Cpuid::SizeId[NC].
Each Core::X86::Apic::ApicId[ApicId] register is preset as follows:
• ApicId[6] = Socket ID.
• ApicId[5:4] = Node ID.
• ApicId[3] = Logical CCX L3 complex ID
• ApicId[2:0]= (SMT) ? {LogicalCoreID[1:0],ThreadId} : {1'b0,LogicalCoreID[1:0]}
The new apic id encoding is enabled for EPYC and EPYC-Rome models.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <158396724913.58170.3539083528095710811.stgit@naples-babu.amd.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Add a boolean variable use_epyc_apic_id_encoding in X86CPUDefinition.
This will be set if this cpu model needs to use new EPYC based
apic id encoding.
Override the handlers with EPYC based handlers if use_epyc_apic_id_encoding
is set. This will be done in x86_cpus_init.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Message-Id: <158396723514.58170.14825482171652019765.stgit@naples-babu.amd.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Use the new functions from topology.h and delete the unused code. Given the
sockets, nodes, cores and threads, the new functions generate apic id for EPYC
mode. Removes all the hardcoded values.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <158396722151.58170.8031705769621392927.stgit@naples-babu.amd.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The arm_current_el() should be invoked after mode switching. Otherwise, we
get a wrong current EL value, since current EL is also determined by
current mode.
Fixes: 4a2696c0d4 ("target/arm: Set PAN bit as required on exception entry")
Signed-off-by: Changbin Du <changbin.du@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200328140232.17278-1-changbin.du@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Loongson multimedia condition instructions were previously implemented as
write 0 to rd due to lack of documentation. So I just confirmed with Loongson
about their encoding and implemented them correctly.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Acked-by: Huacai Chen <chenhc@lemote.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
Message-Id: <20200324122212.11156-1-jiaxun.yang@flygoat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Notice the magic page during translate, much like we already
do for the arm32 commpage. At runtime, raise an exception to
return cpu_loop for emulation.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200213032223.14643-4-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
We are not short of numbers for EXCP_*. There is no need to confuse things
by having EXCP_VMEXIT and EXCP_SYSCALL overlap, even though the former is
only used for system mode and the latter is only used for user mode.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200213032223.14643-2-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The ppc_dcr_read() and ppc_dcr_write() functions call into callbacks
in device code, so we need to hold the QEMU iothread lock while
calling them. This is the case already for the callsites in
kvmppc_handle_dcr_read/write(), but we must also take the lock when
calling the helpers from TCG.
This fixes a bug where attempting to initialise the PPC405EP
SDRAM will cause an assertion when sdram_map_bcr() attempts
to remap memory regions.
Reported-by: Amit Lazar <abasarlaz@hotmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200322192258.14039-1-peter.maydell@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The new ISA v3.0 slbia variants have not been implemented for TCG,
which can lead to crashing when a POWER9 machine boots Linux using
the hash MMU, for example ("disable_radix" kernel command line).
Add them.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20200319064439.1020571-1-npiggin@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
[dwg: Fixed compile error for USER_ONLY builds]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
slbia must invalidate TLBs even if it does not remove a valid SLB
entry, because slbmte can overwrite valid entries without removing
their TLBs.
As the architecture says, slbia invalidates all lookaside information,
not conditionally based on if it removed valid entries.
It does not seem possible for POWER8 or earlier Linux kernels to hit
this bug because it never changes its kernel SLB translations, and it
should always have valid entries if any accesses are made to userspace
regions. However other operating systems which may modify SLB entry 0
or do more fancy things with segments might be affected.
When POWER9 slbia support is added in the next patch, this becomes a
real problem because some new slbia variants don't invalidate all
non-zero entries.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20200318044135.851716-1-npiggin@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Coverity reports a BAD_SHIFT with ctz32(imm5), with imm5 == 0.
This is an invalid encoding, but we diagnose that just below
by rejecting size > 3. Avoid the warning by sinking the
computation of index below the check.
Reported-by: Coverity (CID 1421965)
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200320160622.8040-4-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Coverity raised a shed-load of errors cascading from inferring
that clz32(immh) might yield 32, from immh might be 0.
While immh cannot be 0 from encoding, it is not obvious even to
a human how we've checked that: via the filtering provided by
data_proc_simd[].
Reported-by: Coverity (CID 1421923, and more)
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200320160622.8040-3-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Coverity rightly notes that ctz32(bas) on 0 will return 32,
which makes the len calculation a BAD_SHIFT.
A value of 0 in DBGWCR<n>_EL1.BAS is reserved. Simply move
the existing check we have for this case.
Reported-by: Coverity (CID 1421964)
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200320160622.8040-2-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
There are so many different forms of each RX instruction
that it will be very useful to be able to look at the bytes
to see on which path a bug may lie.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20190531134315.4109-24-richard.henderson@linaro.org>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Collected, to be used in the next patch.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20190531134315.4109-23-richard.henderson@linaro.org>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Many of the multi-part prints have been eliminated by previous
patches. Eliminate the rest of them.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20190531134315.4109-22-richard.henderson@linaro.org>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Note that the ld == 3 case handled by prt_ldmi is decoded as
XCHG_rr and cannot appear here.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20190531134315.4109-21-richard.henderson@linaro.org>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
This has consistency with prt_ri(). It loads all data before
beginning output. It uses exactly one call to prt() to emit
the full instruction.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20190531134315.4109-20-richard.henderson@linaro.org>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
We were eliding all zero indexes. It is only ld==0 that does
not have an index in the instruction. This also allows us to
avoid breaking the final print into multiple pieces.
Reviewed-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20190531134315.4109-19-richard.henderson@linaro.org>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200224141923.82118-8-ysato@users.sourceforge.jp>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
[PMD: Use newer QOM style, split cpu-qom.h, restrict access to
extable array, use rx_cpu_tlb_fill() extracted from patch of
Yoshinori Sato 'Convert to CPUClass::tlb_fill', call cpu_reset
after qemu_init_vcpu, make rx_crname a function]
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200224141923.82118-7-ysato@users.sourceforge.jp>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
[PMD: Use GByteArray in gdbstub (rebase commit a010bdbe),
use device_class_set_parent_reset (rebase commit 781c67ca)]
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
[PMD: Removed tlb_fill, extracted from patch of Yoshinori Sato
'Convert to CPUClass::tlb_fill']
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200224141923.82118-6-ysato@users.sourceforge.jp>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
This part only supported RXv1 instructions.
Instruction manual:
https://www.renesas.com/us/en/doc/products/mpumcu/doc/rx_family/r01us0032ej0120_rxsm.pdf
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200224141923.82118-5-ysato@users.sourceforge.jp>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Bug fixes:
* memory encryption: Disable mem merge
(Dr. David Alan Gilbert)
Features:
* New EPYC CPU definitions (Babu Moger)
* Denventon-v2 CPU model (Tao Xu)
* New 'note' field on versioned CPU models (Tao Xu)
Cleanups:
* x86 CPU topology cleanups (Babu Moger)
* cpu: Use DeviceClass reset instead of a special CPUClass reset
(Peter Maydell)
-----BEGIN PGP SIGNATURE-----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=9fEL
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/ehabkost/tags/x86-and-machine-pull-request' into staging
x86 and machine queue for 5.0 soft freeze
Bug fixes:
* memory encryption: Disable mem merge
(Dr. David Alan Gilbert)
Features:
* New EPYC CPU definitions (Babu Moger)
* Denventon-v2 CPU model (Tao Xu)
* New 'note' field on versioned CPU models (Tao Xu)
Cleanups:
* x86 CPU topology cleanups (Babu Moger)
* cpu: Use DeviceClass reset instead of a special CPUClass reset
(Peter Maydell)
# gpg: Signature made Wed 18 Mar 2020 01:16:43 GMT
# gpg: using RSA key 5A322FD5ABC4D3DBACCFD1AA2807936F984DC5A6
# gpg: issuer "ehabkost@redhat.com"
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" [full]
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6
* remotes/ehabkost/tags/x86-and-machine-pull-request:
hw/i386: Rename apicid_from_topo_ids to x86_apicid_from_topo_ids
hw/i386: Update structures to save the number of nodes per package
hw/i386: Remove unnecessary initialization in x86_cpu_new
machine: Add SMP Sockets in CpuTopology
hw/i386: Consolidate topology functions
hw/i386: Introduce X86CPUTopoInfo to contain topology info
cpu: Use DeviceClass reset instead of a special CPUClass reset
machine/memory encryption: Disable mem merge
hw/i386: Rename X86CPUTopoInfo structure to X86CPUTopoIDs
i386: Add 2nd Generation AMD EPYC processors
i386: Add missing cpu feature bits in EPYC model
target/i386: Add new property note to versioned CPU models
target/i386: Add Denverton-v2 (no MPX) CPU model
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- docker updates for VirGL
- re-factor gdbstub for static GDBState
- re-factor gdbstub for dynamic arrays
- add SVE support to arm gdbstub
- add some guest debug tests to check-tcg
- add aarch64 userspace register tests
- remove packet size limit to gdbstub
- simplify gdbstub monitor code
- report vContSupported in gdbstub to use proper single-step
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAl5xDUIACgkQ+9DbCVqe
KkQwCwf/YtmUsNxxO+CgNctq2u3jV4FoOdQP3bejvmT2+cigKJhQuBlWPg1/YsqF
RDNkmBQx2JaVVMuVmpnwVK1UD+kmYZqrtlOkPNcVrjPmLCq3BVI1LHe6Rjoerx8F
QoZyH0IMNHbBgDo1I46lSFOWcxmOvo+Ow7NX5bPKwlRzf0dyEqSJahRaZLAgUscR
taTtGfk9uQsnxoRsvH/efiQ4bZtUvrEQuhEX3WW/yVE1jTpcb2llwX4xONJb2It3
/0WREGEEIT8PpnWw2S3FH4THY/BjWgz/FPDwNNZYCKBMWDjuG/8KHryd738T9rzo
lkGP9YcXmiyxMMyFFwS8RD3SHr8LvQ==
=Wm+a
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stsquad/tags/pull-testing-and-gdbstub-170320-1' into staging
Testing and gdbstub updates:
- docker updates for VirGL
- re-factor gdbstub for static GDBState
- re-factor gdbstub for dynamic arrays
- add SVE support to arm gdbstub
- add some guest debug tests to check-tcg
- add aarch64 userspace register tests
- remove packet size limit to gdbstub
- simplify gdbstub monitor code
- report vContSupported in gdbstub to use proper single-step
# gpg: Signature made Tue 17 Mar 2020 17:47:46 GMT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-testing-and-gdbstub-170320-1: (28 commits)
gdbstub: Fix single-step issue by confirming 'vContSupported+' feature to gdb
gdbstub: do not split gdb_monitor_write payload
gdbstub: change GDBState.last_packet to GByteArray
tests/tcg/aarch64: add test-sve-ioctl guest-debug test
tests/tcg/aarch64: add SVE iotcl test
tests/tcg/aarch64: add a gdbstub testcase for SVE registers
tests/guest-debug: add a simple test runner
configure: allow user to specify what gdb to use
tests/tcg/aarch64: userspace system register test
target/arm: don't bother with id_aa64pfr0_read for USER_ONLY
target/arm: generate xml description of our SVE registers
target/arm: default SVE length to 64 bytes for linux-user
target/arm: explicitly encode regnum in our XML
target/arm: prepare for multiple dynamic XMLs
gdbstub: extend GByteArray to read register helpers
target/i386: use gdb_get_reg helpers
target/m68k: use gdb_get_reg helpers
target/arm: use gdb_get_reg helpers
gdbstub: add helper for 128 bit registers
gdbstub: move mem_buf to GDBState and use GByteArray
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Here's my final pull request for the qemu-5.0 soft freeze. Sorry this
is just under the wire - I hit some last minute problems that took a
while to fix up and retest.
Highlights are:
* Numerous fixes for the FWNMI feature
* A handful of cleanups to the device tree construction code
* Numerous fixes for the spapr-vscsi device
* A number of fixes and cleanups for real mode (MMU off) softmmu
handling
* Fixes for handling of the PAPR RMA
* Better handling of hotplug/unplug events during boot
* Assorted other fixes
-----BEGIN PGP SIGNATURE-----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=BPnR
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-5.0-20200317' into staging
ppc patch queue 2020-03-17
Here's my final pull request for the qemu-5.0 soft freeze. Sorry this
is just under the wire - I hit some last minute problems that took a
while to fix up and retest.
Highlights are:
* Numerous fixes for the FWNMI feature
* A handful of cleanups to the device tree construction code
* Numerous fixes for the spapr-vscsi device
* A number of fixes and cleanups for real mode (MMU off) softmmu
handling
* Fixes for handling of the PAPR RMA
* Better handling of hotplug/unplug events during boot
* Assorted other fixes
# gpg: Signature made Tue 17 Mar 2020 09:55:07 GMT
# gpg: using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full]
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full]
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full]
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown]
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-5.0-20200317: (45 commits)
pseries: Update SLOF firmware image
ppc/spapr: Ignore common "ibm,nmi-interlock" Linux bug
ppc/spapr: Implement FWNMI System Reset delivery
target/ppc: allow ppc_cpu_do_system_reset to take an alternate vector
ppc/spapr: Allow FWNMI on TCG
ppc/spapr: Fix FWNMI machine check interrupt delivery
ppc/spapr: Add FWNMI System Reset state
ppc/spapr: Change FWNMI names
ppc/spapr: Fix FWNMI machine check failure handling
spapr: Rename DT functions to newer naming convention
spapr: Move creation of ibm,architecture-vec-5 property
spapr: Move creation of ibm,dynamic-reconfiguration-memory dt node
spapr/rtas: Reserve space for RTAS blob and log
pseries: Update SLOF firmware image
ppc/spapr: Move GPRs setup to one place
target/ppc: Fix rlwinm on ppc64
spapr/xive: use SPAPR_IRQ_IPI to define IPI ranges exposed to the guest
hw/scsi/spapr_vscsi: Convert debug fprintf() to trace event
hw/scsi/spapr_vscsi: Prevent buffer overflow
hw/scsi/spapr_vscsi: Do not mix SRP IU size with DMA buffer size
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Update structures X86CPUTopoIDs and CPUX86State to hold the number of
nodes per package. This is required to build EPYC mode topology.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <158396720035.58170.1973738805301006456.stgit@naples-babu.amd.com>
Now that we have all the parameters in X86CPUTopoInfo, we can just
pass the structure to calculate the offsets and width.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <158396717953.58170.5628042059144117669.stgit@naples-babu.amd.com>
The CPUClass has a 'reset' method. This is a legacy from when
TYPE_CPU used not to inherit from TYPE_DEVICE. We don't need it any
more, as we can simply use the TYPE_DEVICE reset. The 'cpu_reset()'
function is kept as the API which most places use to reset a CPU; it
is now a wrapper which calls device_cold_reset() and then the
tracepoint function.
This change should not cause CPU objects to be reset more often
than they are at the moment, because:
* nobody is directly calling device_cold_reset() or
qdev_reset_all() on CPU objects
* no CPU object is on a qbus, so they will not be reset either
by somebody calling qbus_reset_all()/bus_cold_reset(), or
by the main "reset sysbus and everything in the qbus tree"
reset that most devices are reset by
Note that this does not change the need for each machine or whatever
to use qemu_register_reset() to arrange to call cpu_reset() -- that
is necessary because CPU objects are not on any qbus, so they don't
get reset when the qbus tree rooted at the sysbus bus is reset, and
this isn't being changed here.
All the changes to the files under target/ were made using the
included Coccinelle script, except:
(1) the deletion of the now-inaccurate and not terribly useful
"CPUClass::reset" comments was done with a perl one-liner afterwards:
perl -n -i -e '/ CPUClass::reset/ or print' target/*/*.c
(2) this bit of the s390 change was done by hand, because the
Coccinelle script is not sophisticated enough to handle the
parent_reset call being inside another function:
| @@ -96,8 +96,9 @@ static void s390_cpu_reset(CPUState *s, cpu_reset_type type)
| S390CPU *cpu = S390_CPU(s);
| S390CPUClass *scc = S390_CPU_GET_CLASS(cpu);
| CPUS390XState *env = &cpu->env;
|+ DeviceState *dev = DEVICE(s);
|
|- scc->parent_reset(s);
|+ scc->parent_reset(dev);
| cpu->env.sigp_order = 0;
| s390_cpu_set_state(S390_CPU_STATE_STOPPED, cpu);
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200303100511.5498-1-peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Adds the support for 2nd Gen AMD EPYC Processors. The model display
name will be EPYC-Rome.
Adds the following new feature bits on top of the feature bits from the
first generation EPYC models.
perfctr-core : core performance counter extensions support. Enables the VM to
use extended performance counter support. It enables six
programmable counters instead of four counters.
clzero : instruction zeroes out the 64 byte cache line specified in RAX.
xsaveerptr : XSAVE, XSAVE, FXSAVEOPT, XSAVEC, XSAVES always save error
pointers and FXRSTOR, XRSTOR, XRSTORS always restore error
pointers.
wbnoinvd : Write back and do not invalidate cache
ibpb : Indirect Branch Prediction Barrier
amd-stibp : Single Thread Indirect Branch Predictor
clwb : Cache Line Write Back and Retain
xsaves : XSAVES, XRSTORS and IA32_XSS support
rdpid : Read Processor ID instruction support
umip : User-Mode Instruction Prevention support
The Reference documents are available at
https://developer.amd.com/wp-content/resources/55803_0.54-PUB.pdfhttps://www.amd.com/system/files/TechDocs/24594.pdf
Depends on following kernel commits:
40bc47b08b6e ("kvm: x86: Enumerate support for CLZERO instruction")
504ce1954fba ("KVM: x86: Expose XSAVEERPTR to the guest")
6d61e3c32248 ("kvm: x86: Expose RDPID in KVM_GET_SUPPORTED_CPUID")
52297436199d ("kvm: svm: Update svm_xsaves_supported")
Signed-off-by: Babu Moger <babu.moger@amd.com>
Message-Id: <157314966312.23828.17684821666338093910.stgit@naples-babu.amd.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Adds the following missing CPUID bits:
perfctr-core : core performance counter extensions support. Enables the VM
to use extended performance counter support. It enables six
programmable counters instead of 4 counters.
clzero : instruction zeroes out the 64 byte cache line specified in RAX.
xsaveerptr : XSAVE, XSAVE, FXSAVEOPT, XSAVEC, XSAVES always save error
pointers and FXRSTOR, XRSTOR, XRSTORS always restore error
pointers.
ibpb : Indirect Branch Prediction Barrie.
xsaves : XSAVES, XRSTORS and IA32_XSS supported.
Depends on following kernel commits:
40bc47b08b6e ("kvm: x86: Enumerate support for CLZERO instruction")
504ce1954fba ("KVM: x86: Expose XSAVEERPTR to the guest")
52297436199d ("kvm: svm: Update svm_xsaves_supported")
These new features will be added in EPYC-v3. The -cpu help output after the change.
x86 EPYC-v1 AMD EPYC Processor
x86 EPYC-v2 AMD EPYC Processor (with IBPB)
x86 EPYC-v3 AMD EPYC Processor
Signed-off-by: Babu Moger <babu.moger@amd.com>
Message-Id: <157314965662.23828.3063243729449408327.stgit@naples-babu.amd.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Add additional information for -cpu help to indicate the changes in this
version of CPU model.
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Tao Xu <tao3.xu@intel.com>
Message-Id: <20200212081328.7385-4-tao3.xu@intel.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Because MPX is being removed from the linux kernel, remove MPX feature
from Denverton.
Signed-off-by: Tao Xu <tao3.xu@intel.com>
Message-Id: <20200212081328.7385-2-tao3.xu@intel.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
* get/set_uint cleanups (Felipe)
* Lock guard support (Stefan)
* MemoryRegion ownership cleanup (Philippe)
* AVX512 optimization for buffer_is_zero (Robert)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJecOZiAAoJEL/70l94x66DgGkH/jpY4IgqlSAAWCgaxfe1n1vg
ahSzSLrC8wiJq2Jxbmxn+5BbH6BxQ9ibflsY5bvCY/sTb7UlOFCPkFhQ2iUgplkw
ciB5UfgCA6OHpKEhpHhXtzlybtNOlxXNWYJ1SrcVXbRES8f7XdhMKs15mnJJuOOE
k/tuZo/44yZRJl0Cv+nkvIFcCVgyu1q0Lln/1MMPngY2r9gt893cY9feTBSSWgnp
+7HZr5TXI7mcIytczFKzbdujlG4391DGejKX66IIxGcWg9vXS7TwAStzH1vSKVfJ
73SKZBoCU5gpHHHC+dqVyouMerV+UE+WQPNtF+LCsNgJBw/2NXc1ZgDrtz1OI2c=
=+LRX
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
* Bugfixes all over the place
* get/set_uint cleanups (Felipe)
* Lock guard support (Stefan)
* MemoryRegion ownership cleanup (Philippe)
* AVX512 optimization for buffer_is_zero (Robert)
# gpg: Signature made Tue 17 Mar 2020 15:01:54 GMT
# gpg: using RSA key BFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream: (62 commits)
hw/arm: Let devices own the MemoryRegion they create
hw/arm: Remove unnecessary memory_region_set_readonly() on ROM alias
hw/ppc/ppc405: Use memory_region_init_rom() with read-only regions
hw/arm/stm32: Use memory_region_init_rom() with read-only regions
hw/char: Let devices own the MemoryRegion they create
hw/riscv: Let devices own the MemoryRegion they create
hw/dma: Let devices own the MemoryRegion they create
hw/display: Let devices own the MemoryRegion they create
hw/core: Let devices own the MemoryRegion they create
scripts/cocci: Patch to let devices own their MemoryRegions
scripts/cocci: Patch to remove unnecessary memory_region_set_readonly()
scripts/cocci: Patch to detect potential use of memory_region_init_rom
hw/sparc: Use memory_region_init_rom() with read-only regions
hw/sh4: Use memory_region_init_rom() with read-only regions
hw/riscv: Use memory_region_init_rom() with read-only regions
hw/ppc: Use memory_region_init_rom() with read-only regions
hw/pci-host: Use memory_region_init_rom() with read-only regions
hw/net: Use memory_region_init_rom() with read-only regions
hw/m68k: Use memory_region_init_rom() with read-only regions
hw/display: Use memory_region_init_rom() with read-only regions
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For system emulation we need to check the state of the GIC before we
report the value. However this isn't relevant to exporting of the
value to linux-user and indeed breaks the exported value as set by
modify_arm_cp_regs.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200316172155.971-20-alex.bennee@linaro.org>
We also expose a the helpers to read/write the the registers.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200316172155.971-19-alex.bennee@linaro.org>
The Linux kernel chooses the default of 64 bytes for SVE registers on
the basis that it is the largest size on known hardware that won't
grow the signal frame. We still honour the sve-max-vq property and
userspace can expand the number of lanes by calling PR_SVE_SET_VL.
This should not make any difference to SVE enabled software as the SVE
is of course vector length agnostic.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200316172155.971-18-alex.bennee@linaro.org>
This is described as optional but I'm not convinced of the numbering
when multiple target fragments are sent.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200316172155.971-17-alex.bennee@linaro.org>
We will want to generate similar dynamic XML for gdbstub support of
SVE registers (the upstream doesn't use XML). To that end lightly
rename a few things to make the distinction.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200316172155.971-16-alex.bennee@linaro.org>
Instead of passing a pointer to memory now just extend the GByteArray
to all the read register helpers. They can then safely append their
data through the normal way. We don't bother with this abstraction for
write registers as we have already ensured the buffer being copied
from is the correct size.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Damien Hedde <damien.hedde@greensocs.com>
Message-Id: <20200316172155.971-15-alex.bennee@linaro.org>
This is cleaner than poking memory directly and will make later
clean-ups easier.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200316172155.971-14-alex.bennee@linaro.org>
This is cleaner than poking memory directly and will make later
clean-ups easier.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200316172155.971-13-alex.bennee@linaro.org>
This is cleaner than poking memory directly and will make later
clean-ups easier.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200316172155.971-12-alex.bennee@linaro.org>
Provide for an alternate delivery location, -1 defaults to the
architected address.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20200316142613.121089-7-npiggin@gmail.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
FWNMI machine check delivery misses a few things that will make it fail
with TCG at least (which we would like to allow in future to improve
testing).
It's not nice to scatter interrupt delivery logic around the tree, so
move it to excp_helper.c and share code where possible.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20200316142613.121089-5-npiggin@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
rlwinm cannot just AND with Mask if shift value is zero on ppc64 when
Mask Begin is greater than Mask End and high bits are set to 1.
Note that PowerISA 3.0B says that for `rlwinm' ROTL32 is used, and
ROTL32 is defined (in 3.3.14) so that rotated value should have two
copies of lower word of the source value.
This seems to be another incarnation of the fix from 820724d170
("target-ppc: Fix rlwimi, rlwinm, rlwnm again"), except I leave
optimization when Mask value is less than 32 bits.
Fixes: 7b4d326f47 ("target-ppc: Use the new deposit and extract ops")
Cc: qemu-stable@nongnu.org
Signed-off-by: Vitaly Chikunov <vt@altlinux.org>
Message-Id: <20200309204557.14836-1-vt@altlinux.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Currently riscv_cpu_local_irq_pending is used to find out pending
interrupt and VS mode interrupts are being shifted to represent
S mode interrupts in this function. So when the cause returned by
this function is passed to riscv_cpu_do_interrupt to actually
forward the interrupt, the VS mode forwarding check does not work
as intended and interrupt is actually forwarded to hypervisor. This
patch fixes this issue.
Signed-off-by: Rajnesh Kanwal <rajnesh.kanwal49@gmail.com>
Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
As reported in: https://bugs.launchpad.net/qemu/+bug/1851939 we weren't
correctly handling illegal instructions based on the value of MSTATUS_TSR
and the current privledge level.
This patch fixes the issue raised in the bug by raising an illegal
instruction if TSR is set and we are in S-Mode.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Jonathan Behrens <jonathan@fintelia.io
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
This function calculates the maximum size of the RMA as implied by the
host's page size of structure of the VRMA (there are a number of other
constraints on the RMA size which will supersede this one in many
circumstances).
The current interface takes the current RMA size estimate, and clamps it
to the VRMA derived size. The only current caller passes in an arguably
wrong value (it will match the current RMA estimate in some but not all
cases).
We want to fix that, but for now just keep concerns separated by having the
KVM helper function just return the VRMA derived limit, and let the caller
combine it with other constraints. We call the new function
kvmppc_vrma_limit() to more clearly indicate its limited responsibility.
The helper should only ever be called in the KVM enabled case, so replace
its !CONFIG_KVM stub with an assert() rather than a dummy value.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cedric Le Goater <clg@fr.ibm.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Currently, we construct the SLBE used for VRMA translations when the LPCR
is written (which controls some bits in the SLBE), then use it later for
translations.
This is a bit complex and confusing - simplify it by simply constructing
the SLBE directly from the LPCR when we need it.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
When the LPCR is written, we update the env->rmls field with the RMA limit
it implies. Simplify things by just calculating the value directly from
the LPCR value when we need it.
It's possible this is a little slower, but it's unlikely to be significant,
since this is only for real mode accesses in a translation configuration
that's not used very often, and the whole thing is behind the qemu TLB
anyway. Therefore, keeping the number of state variables down and not
having to worry about making sure it's always in sync seems the better
option.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
The table of RMA limits based on the LPCR[RMLS] field is slightly wrong.
We're missing the RMLS == 0 => 256 GiB RMA option, which is available on
POWER8, so add that.
The comment that goes with the table is much more wrong. We *don't* filter
invalid RMLS values when writing the LPCR, and there's not really a
sensible way to do so. Furthermore, while in theory the set of RMLS values
is implementation dependent, it seems in practice the same set has been
available since around POWER4+ up until POWER8, the last model which
supports RMLS at all. So, correct that as well.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Currently we use a big switch statement in ppc_hash64_update_rmls() to work
out what the right RMA limit is based on the LPCR[RMLS] field. There's no
formula for this - it's just an arbitrary mapping defined by the existing
CPU implementations - but we can make it a bit more readable by using a
lookup table rather than a switch. In addition we can use the MiB/GiB
symbols to make it a bit clearer.
While there we add a bit of clarity and rationale to the comment about
what happens if the LPCR[RMLS] doesn't contain a valid value.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
When we store the Logical Partitioning Control Register (LPCR) we have a
big switch statement to work out which are valid bits for the cpu model
we're emulating.
As well as being ugly, this isn't really conceptually correct, since it is
based on the mmu_model variable, whereas the LPCR isn't (only) about the
MMU, so mmu_model is basically just acting as a proxy for the cpu model.
Handle this in a simpler way, by adding a suitable lpcr_mask to the QOM
class.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Currently we create the Real Mode Offset Register (RMOR) on all Book3S cpus
from POWER7 onwards. However the translation mode which the RMOR controls
is no longer supported in POWER9, and so the register has been removed from
the architecture.
Remove it from our model on POWER9 and POWER10.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
For the "pseries" machine, we use "virtual hypervisor" mode where we
only model the CPU in non-hypervisor privileged mode. This means that
we need guest physical addresses within the modelled cpu to be treated
as absolute physical addresses.
We used to do that by clearing LPCR[VPM0] and setting LPCR[RMLS] to a high
limit so that the old offset based translation for guest mode applied,
which does what we need. However, POWER9 has removed support for that
translation mode, which meant we had some ugly hacks to keep it working.
We now explicitly handle this sort of translation for virtual hypervisor
mode, so the hacks aren't necessary. We don't need to set VPM0 and RMLS
from the machine type code - they're now ignored in vhyp mode. On the cpu
side we don't need to allow LPCR[RMLS] to be set on POWER9 in vhyp mode -
that was only there to allow the hack on the machine side.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
When running guests under a hypervisor, the hypervisor obviously needs to
be protected from guest accesses even if those are in what the guest
considers real mode (translation off). The POWER hardware provides two
ways of doing that: The old way has guest real mode accesses simply offset
and bounds checked into host addresses. It works, but requires that a
significant chunk of the guest's memory - the RMA - be physically
contiguous in the host, which is pretty inconvenient. The new way, known
as VRMA, has guest real mode accesses translated in roughly the normal way
but with some special parameters.
In POWER7 and POWER8 the LPCR[VPM0] bit selected between the two modes, but
in POWER9 only VRMA mode is supported and LPCR[VPM0] no longer exists. We
handle that difference in behaviour in ppc_hash64_set_isi().. but not in
other places that we blindly check LPCR[VPM0].
Correct those instances with a new helper to tell if we should be in VRMA
mode.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
On ppc we have the concept of virtual hypervisor ("vhyp") mode, where we
only model the non-hypervisor-privileged parts of the cpu. Essentially we
model the hypervisor's behaviour from the point of view of a guest OS, but
we don't model the hypervisor's execution.
In particular, in this mode, qemu's notion of target physical address is
a guest physical address from the vcpu's point of view. So accesses in
guest real mode don't require translation. If we were modelling the
hypervisor mode, we'd need to translate the guest physical address into
a host physical address.
Currently, we handle this sloppily: we rely on setting up the virtual LPCR
and RMOR registers so that GPAs are simply HPAs plus an offset, which we
set to zero. This is already conceptually dubious, since the LPCR and RMOR
registers don't exist in the non-hypervisor portion of the CPU. It gets
worse with POWER9, where RMOR and LPCR[VPM0] no longer exist at all.
Clean this up by explicitly handling the vhyp case. While we're there,
remove some unnecessary nesting of if statements that made the logic to
select the correct real mode behaviour a bit less clear than it could be.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
The PowerPC 970 CPU was a cut-down POWER4, which had hypervisor capability.
However, it can be (and often was) strapped into "Apple mode", where the
hypervisor capabilities were disabled (essentially putting it always in
hypervisor mode).
That's actually the only mode of the 970 we support in qemu, and we're
unlikely to change that any time soon. However, we do have a partial
implementation of the 970's HID4 register which affects things only
relevant for hypervisor mode.
That stub is also really ugly, since it attempts to duplicate the effects
of HID4 by re-encoding it into the LPCR register used in newer CPUs, but
in a really confusing way.
Just get rid of it.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
a4f30719a8, way back in 2007 noted that "PowerPC hypervisor mode is not
fundamentally available only for PowerPC 64" and added a 32-bit version
of the MSR[HV] bit.
But nothing was ever really done with that; there is no meaningful support
for 32-bit hypervisor mode 13 years later. Let's stop pretending and just
remove the stubs.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Server class POWER CPUs have a "compat" property, which was obsoleted
by commit 7843c0d60d and replaced by a "max-cpu-compat" property on the
pseries machine type. A hack was introduced so that passing "compat" to
-cpu would still produce the desired effect, for the sake of backward
compatibility : it strips the "compat" option from the CPU properties
and applies internally it to the pseries machine. The accessors of the
"compat" property were updated to do nothing but warn the user about the
deprecated status when doing something like:
$ qemu-system-ppc64 -global POWER9-family-powerpc64-cpu.compat=power9
qemu-system-ppc64: warning: CPU 'compat' property is deprecated and has no
effect; use max-cpu-compat machine property instead
This was merged during the QEMU 2.10 timeframe, a few weeks before we
formalized our deprecation process. As a consequence, the "compat"
property fell through the cracks and was never listed in the officialy
deprecated features.
We are now eight QEMU versions later, it is largely time to mention it
in qemu-deprecated.texi. Also, since -global XXX-powerpc64-cpu.compat=
has been emitting warnings since QEMU 2.10 and the usual way of setting
CPU properties is with -cpu, completely remove the "compat" property.
Keep the hack so that -cpu XXX,compat= stays functional some more time,
as required by our deprecation process.
The now empty powerpc_servercpu_properties[] list which was introduced
for "compat" and never had any other use is removed on the way. We can
re-add it in the future if the need for a server class POWER CPU specific
property arises again.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <158274357799.140275.12263135811731647490.stgit@bahia.lan>
[dwg: Convert from .texi to .rst to match upstream change]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
WHPX wasn't using the proper synchronization primitives while
processing async events, which can cause issues with SMP.
Signed-off-by: Sunil Muthuswamy <sunilmut@microsoft.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When HAX is enabled (--enable-hax), GCC 9.2.1 reports issues with
snprintf(). Replacing old snprintf() by g_strdup_printf() fixes the
problem with boundary checks of vm_id and vcpu_id and finally the
warnings produced by GCC.
For more details, one example of warning:
CC i386-softmmu/target/i386/hax-posix.o
qemu/target/i386/hax-posix.c: In function ‘hax_host_open_vm’:
qemu/target/i386/hax-posix.c:124:56: error: ‘%02d’ directive output may be
truncated writing between 2 and 11 bytes into a region of size 3
[-Werror=format-truncation=]
124 | snprintf(name, sizeof HAX_VM_DEVFS, "/dev/hax_vm/vm%02d", vm_id);
| ^~~~
qemu/target/i386/hax-posix.c:124:41: note: directive argument in the range
[-2147483648, 64]
124 | snprintf(name, sizeof HAX_VM_DEVFS, "/dev/hax_vm/vm%02d", vm_id);
| ^~~~~~~~~~~~~~~~~~~~
In file included from /usr/include/stdio.h:867,
from qemu/include/qemu/osdep.h:99,
from qemu/target/i386/hax-posix.c:14:
/usr/include/bits/stdio2.h:67:10: note: ‘__builtin___snprintf_chk’ output
between 17 and 26 bytes into a destination of size 17
67 | return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
68 | __bos (__s), __fmt, __va_arg_pack ());
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Several objects implemented their own uint property getters and setters,
despite them being straightforward (without any checks/validations on
the values themselves) and identical across objects. This makes use of
an enhanced API for object_property_add_uintXX_ptr() which offers
default setters.
Some of these setters used to update the value even if the type visit
failed (eg. because the value being set overflowed over the given type).
The new setter introduces a check for these errors, not updating the
value if an error occurred. The error is propagated.
Signed-off-by: Felipe Franciosi <felipe@nutanix.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently, WHPX is using some default values for the trapped CPUID
functions. These were not in sync with the QEMU values because the
CPUID values were never set with WHPX during VCPU initialization.
Additionally, at the moment, WHPX doesn't support setting CPUID
values in the hypervisor at runtime (i.e. after the partition has
been setup). That is needed to be able to set the CPUID values in
the hypervisor during VCPU init.
Until that support comes, use the QEMU values for the trapped CPUIDs.
Signed-off-by: Sunil Muthuswamy <sunilmut@microsoft.com>
Message-Id: <SN4PR2101MB0880A8323EAD0CD0E8E2F423C0EB0@SN4PR2101MB0880.namprd21.prod.outlook.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently, TSC is set as part of the VM runtime state. Setting TSC at
runtime is heavy and additionally can have side effects on the guest,
which are not very resilient to variances in the TSC. This patch uses
the VM state to determine whether to set TSC or not. Some minor
enhancements for getting TSC values as well that considers the VM state.
Additionally, while setting the TSC, the partition is suspended to
reduce the variance in the TSC value across vCPUs.
Signed-off-by: Sunil Muthuswamy <sunilmut@microsoft.com>
Message-Id: <SN4PR2101MB08804D23439166E81FF151F7C0EA0@SN4PR2101MB0880.namprd21.prod.outlook.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Description copied from Linux kernel commit from Gustavo A. R. Silva
(see [3]):
--v-- description start --v--
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to
declare variable-length types such as these ones is a flexible
array member [1], introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler
warning in case the flexible array does not occur last in the
structure, which will help us prevent some kind of undefined
behavior bugs from being unadvertenly introduced [2] to the
Linux codebase from now on.
--^-- description end --^--
Do the similar housekeeping in the QEMU codebase (which uses
C99 since commit 7be41675f7).
All these instances of code were found with the help of the
following command (then manual analysis, without modifying
structures only having a single flexible array member, such
QEDTable in block/qed.h):
git grep -F '[0];'
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=76497732932f
[3] https://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux.git/commit/?id=17642a2fbd2c1
Inspired-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM_SET_VCPU_EVENTS might actually lead to vcpu registers being modified.
As such this should be the last step of sync to avoid potential overwriting
of whatever changes KVM might have done.
Signed-off-by: Beata Michalska <beata.michalska@linaro.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Message-id: 20200312003401.29017-2-beata.michalska@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Convert kvm_arm_vgic_probe() so that it returns a
bitmap of supported in-kernel emulation VGIC versions instead
of the max version: at the moment values can be v2 and v3.
This allows to expose the case where the host GICv3 also
supports GICv2 emulation. This will be useful to choose the
default version in KVM accelerated mode.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200311131618.7187-5-eric.auger@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We must include the tag in the FAR_ELx register when raising
an addressing exception. Which means that we should not clear
out the tag during translation.
We cannot at present comply with this for user mode, so we
retain the clean_data_tbi function for the moment, though it
no longer does what it says on the tin for system mode. This
function is to be replaced with MTE, so don't worry about the
slight misnaming.
Buglink: https://bugs.launchpad.net/qemu/+bug/1867072
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200308012946.16303-3-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We fail to validate the upper bits of a virtual address on a
translation disabled regime, as per AArch64.TranslateAddressS1Off.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200308012946.16303-2-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fix a couple of comment typos.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200303174950.3298-5-peter.maydell@linaro.org
A write to the CONTROL register can change our current EL (by
writing to the nPRIV bit). That means that we can't assume
that s->current_el is still valid in trans_MSR_v7m() when
we try to rebuild the hflags.
Add a new helper rebuild_hflags_m32_newel() which, like the
existing rebuild_hflags_a32_newel(), recalculates the current
EL from scratch, and use it in trans_MSR_v7m().
This fixes an assertion about an hflags mismatch when the
guest changes privilege by writing to CONTROL.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200303174950.3298-4-peter.maydell@linaro.org
For M-profile CPUs, the FAULTMASK value affects the CPU's MMU index
(it changes the NegPri bit). We update the hflags after calls
to the v7m_msr helper in trans_MSR_v7m() but forgot to do so
in trans_CPS_v7m().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200303174950.3298-3-peter.maydell@linaro.org
It's nicer to just call one function than calling a function for each
possible iplb type.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20200310090950.61172-1-frankja@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
This would almost certainly cause the exception names to be reported
incorrectly. Coverity found the issue (CID 1420223). As per Peter's
suggestion, I've also added a comma at the end of the list to avoid the issue
reappearing in the future.
Fixes: ab67a1d07a ("target/riscv: Add support for the new execption numbers")
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
This data access was forgotten when we added support for cleaning
addresses of TBI information.
Fixes: 3a471103ac
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200302175829.2183-8-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The function does not write registers, and only reads them by
implication via the exception path.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200302175829.2183-7-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is an aarch64-only function. Move it out of the shared file.
This patch is code movement only.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200302175829.2183-6-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We missed this case within AArch64.ExceptionReturn.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200302175829.2183-5-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
If by context we know that we're in AArch64 mode, we need not
test for M-profile when reconstructing the full ARMMMUIdx.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200302175829.2183-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We now cache the core mmu_idx in env->hflags. Rather than recompute
from scratch, extract the field. All of the uses of cpu_mmu_index
within target/arm are within helpers, and env->hflags is always stable
within a translation block from whence helpers are called.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200302175829.2183-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Replicate the single TBI bit from TCR_EL2 and TCR_EL3 so that
we can unconditionally use pointer bit 55 to index into our
composite TBI1:TBI0 field.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200302175829.2183-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This bit traps EL1 access to tlb maintenance insns.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200229012811.24129-12-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This bit traps EL1 access to cache maintenance insns that operate
to the point of unification. There are no longer any references to
plain aa64_cacheop_access, so remove it.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200229012811.24129-11-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This bit traps EL1 access to cache maintenance insns that operate
to the point of coherency or persistence.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200229012811.24129-10-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This bit traps EL1 access to the auxiliary control registers.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200229012811.24129-9-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Update the {TGE,E2H} == '11' masking to ARMv8.6.
If EL2 is configured for aarch32, disable all of
the bits that are RES0 in aarch32 mode.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200229012811.24129-6-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We have disabled EL2 and EL3 for user-only, which means that these
registers "don't exist" and should not be set.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200229012811.24129-5-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In arm_cpu_reset, we configure many system registers so that user-only
behaves as it should with a minimum of ifdefs. However, we do not set
all of the system registers as required for a cpu with EL2 and EL3.
Disabling EL2 and EL3 mean that we will not look at those registers,
which means that we don't have to worry about configuring them.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200229012811.24129-4-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200229012811.24129-3-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Don't merely start with v8.0, handle v7VE as well. Ensure that writes
from aarch32 mode do not change bits in the other half of the register.
Protect reads of aa64 id registers with ARM_FEATURE_AARCH64.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200229012811.24129-2-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The ARMv8.2-TTCNP extension allows an implementation to optimize by
sharing TLB entries between multiple cores, provided that software
declares that it's ready to deal with this by setting a CnP bit in
the TTBRn_ELx. It is mandatory from ARMv8.2 onward.
For QEMU's TLB implementation, sharing TLB entries between different
cores would not really benefit us and would be a lot of work to
implement. So we implement this extension in the "trivial" manner:
we allow the guest to set and read back the CnP bit, but don't change
our behaviour (this is an architecturally valid implementation
choice).
The only code path which looks at the TTBRn_ELx values for the
long-descriptor format where the CnP bit is defined is already doing
enough masking to not get confused when the CnP bit at the bottom of
the register is set, so we can simply add a comment noting why we're
relying on that mask.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200225193822.18874-1-peter.maydell@linaro.org
This pull request is almost entirely an implementation of the draft hypervisor
extension. This extension is still in draft and is expected to have
incompatible changes before being frozen, but we've had good luck managing
other RISC-V draft extensions in QEMU so far.
Additionally, there's a fix to PCI addressing and some improvements to the
M-mode timer.
This boots linux and passes make check for me.
-----BEGIN PGP SIGNATURE-----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=5W7J
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/palmer/tags/riscv-for-master-5.0-sf3' into staging
RISC-V Patches for the 5.0 Soft Freeze, Part 3
This pull request is almost entirely an implementation of the draft hypervisor
extension. This extension is still in draft and is expected to have
incompatible changes before being frozen, but we've had good luck managing
other RISC-V draft extensions in QEMU so far.
Additionally, there's a fix to PCI addressing and some improvements to the
M-mode timer.
This boots linux and passes make check for me.
# gpg: Signature made Tue 03 Mar 2020 00:23:20 GMT
# gpg: using RSA key 2B3C3747446843B24A943A7A2E1319F35FBB1889
# gpg: issuer "palmer@dabbelt.com"
# gpg: Good signature from "Palmer Dabbelt <palmer@dabbelt.com>" [unknown]
# gpg: aka "Palmer Dabbelt <palmer@sifive.com>" [unknown]
# gpg: aka "Palmer Dabbelt <palmerdabbelt@google.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 00CE 76D1 8349 60DF CE88 6DF8 EF4C A150 2CCB AB41
# Subkey fingerprint: 2B3C 3747 4468 43B2 4A94 3A7A 2E13 19F3 5FBB 1889
* remotes/palmer/tags/riscv-for-master-5.0-sf3: (38 commits)
hw/riscv: Provide rdtime callback for TCG in CLINT emulation
target/riscv: Emulate TIME CSRs for privileged mode
riscv: virt: Allow PCI address 0
target/riscv: Allow enabling the Hypervisor extension
target/riscv: Add the MSTATUS_MPV_ISSET helper macro
target/riscv: Add support for the 32-bit MSTATUSH CSR
target/riscv: Set htval and mtval2 on execptions
target/riscv: Raise the new execptions when 2nd stage translation fails
target/riscv: Implement second stage MMU
target/riscv: Allow specifying MMU stage
target/riscv: Respect MPRV and SPRV for floating point ops
target/riscv: Mark both sstatus and msstatus_hs as dirty
target/riscv: Disable guest FP support based on virtual status
target/riscv: Only set TB flags with FP status if enabled
target/riscv: Remove the hret instruction
target/riscv: Add hfence instructions
target/riscv: Add Hypervisor trap return support
target/riscv: Add hypvervisor trap support
target/riscv: Generate illegal instruction on WFI when V=1
target/ricsv: Flush the TLB on virtulisation mode changes
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The ARMv8.3-CCIDX extension makes the CCSIDR_EL1 system ID registers
have a format that uses the full 64 bit width of the register, and
adds a new CCSIDR2 register so AArch32 can get at the high 32 bits.
QEMU doesn't implement caches, so we just treat these ID registers as
opaque values that are set to the correct constant values for each
CPU. The only thing we need to do is allow 64-bit values in our
cssidr[] array and provide the CCSIDR2 accessors.
We don't set the CCIDX field in our 'max' CPU because the CCSIDR
constant values we use are the same as the ones used by the
Cortex-A57 and they are in the old 32-bit format. This means
that the extra regdef added here is unused currently, but it
means that whenever in the future we add a CPU that does need
the new 64-bit format it will just work when we set the cssidr
values and the ID registers for it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200224182626.29252-1-peter.maydell@linaro.org
The v8.4-RCPC extension implements some new instructions:
* LDAPUR, LDAPURB, LDAPURH, LDAPRSB, LDAPRSH, LDAPRSW
* STLUR, STLURB, STLURH
These are all in a new subgroup of encodings that sits below the
top-level "Loads and Stores" group in the Arm ARM.
The STLUR* instructions have standard store-release semantics; the
LDAPUR* have Load-AcquirePC semantics, but (as with LDAPR*) we choose
to implement them as the slightly stronger Load-Acquire.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200224172846.13053-4-peter.maydell@linaro.org
The v8.3-RCPC extension implements three new load instructions
which provide slightly weaker consistency guarantees than the
existing load-acquire operations. For QEMU we choose to simply
implement them with a full LDAQ barrier.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200224172846.13053-3-peter.maydell@linaro.org
We missed an instance of using FIELD_EX32 on a 64-bit ID
register, in isar_feature_aa64_pmu_8_4(). Fix it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200224172846.13053-2-peter.maydell@linaro.org
Passing the raw op field from the manual is less instructive
than it might be. Do the full decode and use the existing
helpers to perform the expansion.
Since these are v8 insns, VECLEN+VECSTRIDE are already RES0.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200224222232.13807-18-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Passing the raw o1 and o2 fields from the manual is less
instructive than it might be. Do the full decode and let
the trans_* functions pass in booleans to a helper.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200224222232.13807-17-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Those vfp instructions without extra opcode fields can
share a common @format for brevity.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200224222232.13807-16-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We have converted all tests against these features
to ISAR tests.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200224222232.13807-15-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Have the calls adjacent as an intermediate step toward
actually merging the decodes.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200224222232.13807-13-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Now that we no longer have an early check for ARM_FEATURE_VFP,
we can use the proper ISA check in trans_VLLDM_VLSTM.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200224222232.13807-12-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We now have proper ISA checks within each trans_* function.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200224222232.13807-11-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
All remaining tests for VFP4 are for fused multiply-add insns.
Since the MVFR1 field is used for both VFP and NEON, move its adjustment
from the !has_neon block to the (!has_vfp && !has_neon) block.
Test for vfp of the appropraite width alongside the test for simdfmac
within translate-vfp.inc.c. Within disas_neon_data_insn, we have
already tested for ARM_FEATURE_NEON.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200224222232.13807-10-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We will eventually remove the early ARM_FEATURE_VFP test,
so add a proper test for each trans_* that does not already
have another ISA test.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200224222232.13807-9-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Sort this check to the start of a trans_* function.
Merge this with any existing test for fpdp_v2.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200224222232.13807-8-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Shuffle the order of the checks so that we test the ISA
before we test anything else, such as the register arguments.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200224222232.13807-7-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We cannot easily create "any" functions for these, because the
ID_AA64PFR0 fields for FP and SIMD signal "enabled" with zero.
Which means that an aarch32-only cpu will return incorrect results
when testing the aarch64 registers.
To use these, we must either have context or additionally test
vs ARM_FEATURE_AARCH64.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200224222232.13807-5-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We will shortly use these to test for VFPv2 and VFPv3
in different situations.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200224222232.13807-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The old name, isar_feature_aa32_fpdp, does not reflect
that the test includes VFPv2. We will introduce another
feature tests for VFPv3.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200224222232.13807-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use this in the places that were checking ARM_FEATURE_VFP, and
are obviously testing for the existance of the register set
as opposed to testing for some particular instruction extension.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200224222232.13807-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We had set this for aarch32-only in arm_max_initfn, but
failed to set the same bit for aarch64.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200218190958.745-2-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Currently, TIME CSRs are emulated only for user-only mode. This
patch add TIME CSRs emulation for privileged mode.
For privileged mode, the TIME CSRs will return value provided
by rdtime callback which is registered by QEMU machine/platform
emulation (i.e. CLINT emulation). If rdtime callback is not
available then the monitor (i.e. OpenSBI) will trap-n-emulate
TIME CSRs in software.
We see 25+% performance improvement in hackbench numbers when
TIME CSRs are not trap-n-emulated.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Add a helper macro MSTATUS_MPV_ISSET() which will determine if the
MSTATUS_MPV bit is set for both 32-bit and 64-bit RISC-V.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
