riscv_excp_names[] and riscv_intr_names[] are only referenced by
target/riscv/cpu.c locally.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210514052435.2203156-1-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Physical Memory Protection is a system feature.
Avoid polluting the user-mode emulation by its definitions.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-id: 20210516205333.696094-1-f4bug@amsat.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
QEMU 5.1 changed the behaviour of the default boot for the RISC-V virt
and sifive_u machines. This patch moves that change from the
deprecated.rst file to the removed-features.rst file and the
target-riscv.rst.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-id: 4f1c261e7f69045ab8bb8926d85fe1d35e48ea5b.1620081256.git.alistair.francis@wdc.com
The wfi exception trigger behavior should take into account user mode,
hstatus.vtw, and the fact the an wfi might raise different types of
exceptions depending on various factors:
If supervisor mode is not present:
- an illegal instruction exception should be generated if user mode
executes and wfi instruction and mstatus.tw = 1.
If supervisor mode is present:
- when a wfi instruction is executed, an illegal exception should be triggered
if either the current mode is user or the mode is supervisor and mstatus.tw is
set.
Plus, if the hypervisor extensions are enabled:
- a virtual instruction exception should be raised when a wfi is executed from
virtual-user or virtual-supervisor and hstatus.vtw is set.
Signed-off-by: Jose Martins <josemartins90@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210420213656.85148-1-josemartins90@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
At present the Microchip Icicle Kit machine only supports using
'-bios' to load the HSS, and does not support '-kernel' for direct
kernel booting just like other RISC-V machines do. One has to use
U-Boot which is chain-loaded by HSS, to load a kernel for testing.
This is not so convenient.
Adding '-kernel' support together with the existing '-bios', we
follow the following table to select which payload we execute:
-bios | -kernel | payload
------+------------+--------
N | N | HSS
Y | don't care | HSS
N | Y | kernel
This ensures backwards compatibility with how we used to expose
'-bios' to users. When '-kernel' is used for direct boot, '-dtb'
must be present to provide a valid device tree for the board,
as we don't generate device tree.
When direct kernel boot is used, the OpenSBI fw_dynamic BIOS image
is used to boot a payload like U-Boot or OS kernel directly.
Documentation is updated to describe the direct kernel boot. Note
as of today there is still no PolarFire SoC support in the upstream
Linux kernel hence the document does not include instructions for
that. It will be updated in the future.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210430071302.1489082-8-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The OpenSBI BIOS image names are used by many RISC-V machines.
Let's define macros for them.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210430071302.1489082-7-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Update the 'sifive_u' machine documentation to mention the '-dtb'
option that can be used to pass a custom DTB to QEMU.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210430071302.1489082-6-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The supported device bullet list has an additional space before each
entry, which makes a wrong indentation level. Correct it.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210430071302.1489082-5-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The official DT bindings of PLIC uses "sifive,plic-1.0.0" as the
compatible string in the upstream Linux kernel. "riscv,plic0" is
now legacy and has to be kept for backward compatibility of legacy
systems.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210430071302.1489082-4-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Linux kernel commit a2770b57d083 ("dt-bindings: timer: Add CLINT bindings")
adds the official DT bindings for CLINT, which uses "sifive,clint0"
as the compatible string. "riscv,clint0" is now legacy and has to
be kept for backward compatibility of legacy systems.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210430071302.1489082-3-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Since commit 78da6a1bca ("device_tree: add qemu_fdt_setprop_string_array helper"),
we can use the new helper to set the compatible strings for the
SiFive test device node.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210430071302.1489082-2-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Since commit 78da6a1bca ("device_tree: add qemu_fdt_setprop_string_array helper"),
we can use the new helper to set the clock name for the ethernet
controller node.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210430071302.1489082-1-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
- add the multiarch signals stress test
- fix display of multi-word compiler stanzas in meson
- fix quoting of multi-word compiler stazas in configure.sh
- tag some acceptance tests as TCG only
- make checkpatch test work harder to find clean diffs
- split gprof/gconv job to avoid timeouts
- fix centos8 VM build by adding --source-path
- make checkpatch aware of .h.inc and .c.inc paths
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmC+JFAACgkQ+9DbCVqe
KkS7QQf/ShUUnh2VIBUMOiYV7aeYTpeVJC0SLOGuvD2mVk9taTGFUsAdOlg+q1am
2fhl8q01cUwOIdXCrHoz3YuqLT2ECaYkjFs6gKySEoCOtaRIvbGBMLTJVXWAYMai
NaxQmu0Y1eaD9dd2ScPt8HS0D2GlhpPa3CDi3QIDZ2ZGmAMSLFHJ0v0yQVKrtMjL
MYVNX01o868bgSAnJmnW3HxjjqJDFfoInTQM65B+kvKRG2CZAkfu2LS9G3ErCi1S
hK2yL4gCutrEWHMrWPoB9jVXPu91VdvT/89RcJsEfaHQPBiM/gZqjjGz/PmVwrsb
YgVY96g4G5PFUs+bhowA5o1GVMOtFA==
=9UW2
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stsquad/tags/pull-testing-updates-070621-2' into staging
A few testing and configure updates:
- add the multiarch signals stress test
- fix display of multi-word compiler stanzas in meson
- fix quoting of multi-word compiler stazas in configure.sh
- tag some acceptance tests as TCG only
- make checkpatch test work harder to find clean diffs
- split gprof/gconv job to avoid timeouts
- fix centos8 VM build by adding --source-path
- make checkpatch aware of .h.inc and .c.inc paths
# gpg: Signature made Mon 07 Jun 2021 14:51:12 BST
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-testing-updates-070621-2:
scripts/checkpatch.pl: process .c.inc and .h.inc files as C source
tests/vm: expose --source-path to scripts to find extra files
gitlab-ci: Split gprof-gcov job
gitlab: work harder to avoid false positives in checkpatch
tests/acceptance: tag various arm tests as TCG only
tests/tcg/configure.sh: tweak quoting of target_compiler
meson.build: fix cosmetics of compiler display
tests/tcg: add a multiarch signals test to stress test signal delivery
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Change the regex used to determine whether a file should be processed as
C source to include .c.inc and .h.inc extensions.
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Message-Id: <20210520195142.941261-1-matheus.ferst@eldorado.org.br>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Currently the centos8 image expects to run an in-src build to find the
kick starter file. Fix this.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210602103527.32021-1-alex.bennee@linaro.org>
This job is hitting the 70min limit, so split it in 2 tasks.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Message-Id: <20210525082556.4011380-7-f4bug@amsat.org>
This copies the behaviour of patchew's configuration to make the diff
algorithm generate a minimal diff.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20210602153247.27651-1-alex.bennee@linaro.org>
We should never be trying to run most of these models under a KVM
environment.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Willian Rampazzo <willianr@redhat.com>
Message-Id: <20210527160319.19834-7-alex.bennee@linaro.org>
If you configure the host compiler with a multi-command stanza like:
--cc="ccache gcc"
then the configure.sh machinery falls over with confusion. Work around
this by ensuring we correctly quote so where we need a complete
evaluation we get it. Of course the has() check needs single variable
so we need to unquote that. This does mean it essentially checks that
just the ccache command exits but if we got past that step we still
check the compiler actually does something.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Cc: Thomas Huth <thuth@redhat.com>
Message-Id: <20210527160319.19834-4-alex.bennee@linaro.org>
If you specify something like --cc="ccache gcc" on your configure line
the summary output misses the rest of the cmd_array. Do some string
joining to make it complete.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210527160319.19834-3-alex.bennee@linaro.org>
This adds a simple signal test that combines the POSIX timer_create
with signal delivery across multiple threads. The aim is to provide a
bit more of a stress test to flush out signal handling issues for
easily than the occasional random crash we sometimes see in linux-test
or threadcount.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210527160319.19834-2-alex.bennee@linaro.org>
The symbol address_space_memory are already declared in
include/exec/address-spaces.h. So let's add this header file
and remove the redundant declaration in include/hw/virtio/vhost-vdpa.h.
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20210517123246.999-1-xieyongji@bytedance.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
While we only use stdin, the chardev is named 'stdio'.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20210602170759.2500248-4-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The "nubus-macfb" currently shows up as uncategorized device in
the output of "-device help". Put it into the display category
to fix this ugliness.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210531073255.46286-1-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This patch fixes calculation of number of the instructions
that fit the current page. It prevents creation of the translation
blocks that cross the page boundaries. It is required for deterministic
exception generation in icount mode.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <162072241046.823357.10485774346114851009.stgit@pasha-ThinkPad-X280>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Long story short, we need a space here for the reference to work
correctly.
Longer story:
Without the space, kerneldoc generates a line like this:
one of :c:type:`MemoryListener.region_add\(\) <MemoryListener>`,:c:type:`MemoryListener.region_del\(\)
Sphinx does not process the role information correctly, so we get this
(my pseudo-notation) construct:
<text>,:c:type:</text>
<reference target="MemoryListener">MemoryListener.region_del()</reference>
which does not reference the desired entity, and leaves some extra junk
in the rendered output. See
https://qemu-project.gitlab.io/qemu/devel/memory.html#c.MemoryListener
member log_start for an example of the broken output as it looks today.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20210511192950.2061326-1-jsnow@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Headers should be included from the 'include/' directory,
not from the root directory.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-Id: <20210516205034.694788-1-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Physical Memory Protection is a system feature.
Avoid polluting the user-mode emulation by its definitions.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20210516205333.696094-1-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Implement via expansion, so don't actually set TCG_TARGET_HAS_rotv_vec.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Implement via expansion, so don't actually set TCG_TARGET_HAS_roti_vec.
For NEON, this is shift-right followed by shift-left-and-insert.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The three vector shift by vector operations are all implemented via
expansion. Therefore do not actually set TCG_TARGET_HAS_shv_vec,
as none of shlv_vec, shrv_vec, sarv_vec may actually appear in the
instruction stream, and therefore also do not appear in tcg_target_op_def.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
NEON has 3 instructions implementing this 4 argument operation,
with each insn overlapping a different logical input onto the
destination register.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This is minimum and maximum, signed and unsigned.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This is saturating add and subtract, signed and unsigned.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This consists of the three immediate shifts: shli, shri, sari.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
These logical and arithmetic operations are optional, but are
trivial to accomplish with the existing infrastructure.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Implementing dup2, add, sub, and, or, xor as the minimal set.
This allows us to actually enable neon in the header file.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Most of dupi is copied from tcg/aarch64, which has the same
encoding for AdvSimdExpandImm.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add registers and function stubs. The functionality
is disabled via use_neon_instructions defined to 0.
We must still include results for the mandatory opcodes in
tcg_target_op_def, as all opcodes are checked during tcg init.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Change the return value to bool, because that's what is should
have been from the start. Pass the ct mask instead of the whole
TCGArgConstraint, as that's the only part that's relevant.
Change the value argument to int64_t. We will need the extra
width for 32-bit hosts wanting to match vector constants.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
