It is unnecessary to check nbd_client_connected() because every time
s->state is moved out of NBD_CLIENT_CONNECTED the socket is shut down
and all coroutines are resumed.
The only case where it was actually needed is when the NBD
server disconnects and there is no reconnect-delay. In that
case, nbd_receive_replies() does not set s->reply.handle and
nbd_co_do_receive_one_chunk() cannot continue. For that one case,
check the return value of nbd_receive_replies().
As to the others:
* nbd_receive_replies() can put the current coroutine to sleep if another
reply is ongoing; then it will be woken by nbd_channel_error(), called
by the ongoing reply. Or it can try itself to read a reply header and
fail, thus calling nbd_channel_error() itself.
* nbd_co_send_request() will write the body of the request and fail
* nbd_reply_chunk_iter_receive() will call nbd_co_receive_one_chunk()
and then nbd_co_do_receive_one_chunk(), which will handle the failure as
above; or it will just detect a previous call to nbd_iter_channel_error()
via iter->ret < 0.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220414175756.671165-4-pbonzini@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@openvz.org>
Reviewed-by: Lukas Straub <lukasstraub2@web.de>
Signed-off-by: Eric Blake <eblake@redhat.com>
Several coroutine functions in block/nbd.c are not marked as such. This
patch adds a few more markers; it is not exhaustive, but it focuses
especially on:
- places that wake other coroutines, because aio_co_wake() has very
different semantics inside a coroutine (queuing after yield vs. entering
immediately);
- functions with _co_ in their names, to avoid confusion
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220414175756.671165-3-pbonzini@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@openvz.org>
Reviewed-by: Lukas Straub <lukasstraub2@web.de>
Signed-off-by: Eric Blake <eblake@redhat.com>
The .reply_possible field of s->requests is never set to false. This is
not a problem as it is only a safeguard to detect protocol errors,
but it's sloppy. In fact, the field is actually not necessary at all,
because .coroutine is set to NULL in NBD_FOREACH_REPLY_CHUNK after
receiving the last chunk. Thus, replace .reply_possible with .coroutine
and move the check before deciding the fate of this request.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220414175756.671165-2-pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@openvz.org>
Reviewed-by: Lukas Straub <lukasstraub2@web.de>
Signed-off-by: Eric Blake <eblake@redhat.com>
Add simple test that new interface introduced in previous commit works.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@openvz.org>
Message-Id: <20220314213226.362217-4-v.sementsov-og@mail.ru>
[eblake: Adjust S-o-b to Vladimir's new email, with permission]
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Hi all! Current logic of relying on search through backing chain is not
safe neither convenient.
Sometimes it leads to necessity of extra bitmap copying. Also, we are
going to add "snapshot-access" driver, to access some snapshot state
through NBD. And this driver is not formally a filter, and of course
it's not a COW format driver. So, searching through backing chain will
not work. Instead of widening the workaround of bitmap searching, let's
extend the interface so that user can select bitmap precisely.
Note, that checking for bitmap active status is not copied to the new
API, I don't see a reason for it, user should understand the risks. And
anyway, bitmap from other node is unrelated to this export being
read-only or read-write.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@openvz.org>
Message-Id: <20220314213226.362217-3-v.sementsov-og@mail.ru>
[eblake: Adjust S-o-b to Vladimir's new email, with permission]
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Rename the type to be reused. Old name is "what is it for". To be
natively reused for other needs, let's name it exactly "what is it".
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@openvz.org>
Message-Id: <20220314213226.362217-2-v.sementsov-og@mail.ru>
[eblake: Adjust S-o-b to Vladimir's new email, with permission]
Reviewed-by: Eric Blake <eblake@redhat.com>
Acked-by: John Snow <jsnow@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
The official spelling does not use camel case.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-Id: <20220422083403.1082924-1-sw@weilnetz.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The last change to this file has been done in 2012, so it
seems like this is not really used anymore, and the content
is likely very out of date now.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220412113824.297108-1-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
- New @force parameter for blockdev-change-medium
- Improvements to the iotests to help with debugging
- Fix iotest 108 on systems without user_allow_other in fuse.conf
-----BEGIN PGP SIGNATURE-----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=url0
-----END PGP SIGNATURE-----
Merge tag 'pull-block-2022-04-25' of https://gitlab.com/hreitz/qemu into staging
Block patches:
- New @force parameter for blockdev-change-medium
- Improvements to the iotests to help with debugging
- Fix iotest 108 on systems without user_allow_other in fuse.conf
# -----BEGIN PGP SIGNATURE-----
#
# iQJGBAABCAAwFiEEy2LXoO44KeRfAE00ofpA0JgBnN8FAmJmqyISHGhyZWl0ekBy
# ZWRoYXQuY29tAAoJEKH6QNCYAZzf7uEP/RKNblyIuFjHkPgaMzWqdGUjHpbRzKBi
# NFgO+ISRCSx/KXYBaanJP94qKLfpACJ1JHDUD3hipeO3kmVGmtF93cKypTQS4qhL
# bGmX+h38AK1omSR2iWRhu4ue4VAPeu9gLoHNYJ5vZlylWD3eHdppN7K2KFf7Aeo5
# /BnhwHiU2IQ7WkLlo5Pdb96+LqZfmCGYJGWO6eWx123+j+bpjLfpmV9+Kjzb1pDc
# FN60OFlp8RozXHKpqh4ZoThtJ+t3sYdlo6yvg1K18Y5JcXTx5d4D24HGo1ZIRxqz
# XgJbi+bSr8hnxCjvdUZlr3IpbjAE5DVbCjtDxyjGnim6vjIwhxCSWM7Bvzw2tm60
# TYNl2zxyIe5831v6Xv/YfYJFqtos/orZf87TSqx/uWrfinbxZ1nN/8zi5z9lC8tg
# S6IlNpKPK0wv33BmLVHcsnMABLY2YiJPx/Ngl0CvAEGvkQdaHzgcYGbmeEMrZTv7
# hVpBb1t+AKmnXYYZdCh4ulfJLUg3R9mXf0oI3otbcpNMwExB6hqcVI23VYC00Ct5
# m3Tb6bddIkBih25l9B7i6FPWfXG+0zu6Q4kIQiXmfNkqKseQ96aDY1aAU/GWoTZH
# MOOPqIhmLRgyYpJ3+am9AseczaMybC4DIfx1VXzjwS/X3YwHvHEbZ7iPR6C0630Z
# yslJbuH4ERl7
# =url0
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 25 Apr 2022 07:07:30 AM PDT
# gpg: using RSA key CB62D7A0EE3829E45F004D34A1FA40D098019CDF
# gpg: issuer "hreitz@redhat.com"
# gpg: Good signature from "Hanna Reitz <hreitz@redhat.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: CB62 D7A0 EE38 29E4 5F00 4D34 A1FA 40D0 9801 9CDF
* tag 'pull-block-2022-04-25' of https://gitlab.com/hreitz/qemu:
iotests/108: Fix when missing user_allow_other
iotests: make qemu_io_log() check return codes by default
iotests: remove qemu_io_silent() and qemu_io_silent_check().
iotests: remove qemu_io_pipe_and_status()
iotests/image-fleecing: switch to qemu_io()
iotests/migration-permissions: use assertRaises() for qemu_io() negative test
iotests: rebase qemu_io() on top of qemu_tool()
iotests: create generic qemu_tool() function
iotests/040: Fix TestCommitWithFilters test
iotests/040: Don't check image pattern on zero-length image
iotests: Don't check qemu_io() output for specific error strings
iotests/163: Fix broken qemu-io invocation
iotests: replace calls to log(qemu_io(...)) with qemu_io_log()
block: add 'force' parameter to 'blockdev-change-medium' command
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
FUSE exports' allow-other option defaults to "auto", which means that it
will try passing allow_other as a mount option, and fall back to not
using it when an error occurs. We make no effort to hide fusermount's
error message (because it would be difficult, and because users might
want to know about the fallback occurring), and so when allow_other does
not work (primarily when /etc/fuse.conf does not contain
user_allow_other), this error message will appear and break the
reference output.
We do not need allow_other here, though, so we can just pass
allow-other=off to fix that.
Reported-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220421142435.569600-1-hreitz@redhat.com>
Tested-by: Markus Armbruster <armbru@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
Just like qemu_img_log(), upgrade qemu_io_log() to enforce a return code
of zero by default.
Tests that use qemu_io_log(): 242 245 255 274 303 307 nbd-reconnect-on-open
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220418211504.943969-13-jsnow@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Like qemu-img, qemu-io returning 0 should be the norm and not the
exception. Remove all calls to qemu_io_silent that just assert the
return code is zero (That's every last call, as it turns out), and
replace them with a normal qemu_io() call.
qemu_io_silent_check() appeared to have been unused already.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220418211504.943969-12-jsnow@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
I know we just added it, sorry. This is done in favor of qemu_io() which
*also* returns the console output and status, but with more robust error
handling on failure.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220418211504.943969-11-jsnow@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
This test expects failure ... but only sometimes. When? Why?
It's for reads of a region not defined by a bitmap. Adjust the test to
be more explicit about what it expects to fail and why.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220418211504.943969-10-jsnow@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Modify this test to use assertRaises for its negative testing of
qemu_io. If the exception raised does not match the one we tell it to
expect, we get *that* exception unhandled. If we get no exception, we
get a unittest assertion failure and the provided emsg printed to
screen.
If we get the CalledProcessError exception but the output is not what we
expect, we re-raise the original CalledProcessError.
Tidy.
(Note: Yes, you can reference "with" objects after that block ends; it
just means that ctx.__exit__(...) will have been called on it. It does
not *actually* go out of scope. unittests expects you to want to inspect
the Exception object, so they leave it defined post-exit.)
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220418211504.943969-9-jsnow@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
reimplement qemu_img() in terms of qemu_tool() in preparation for doing
the same with qemu_io().
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220418211504.943969-7-jsnow@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Without this change, asserting that qemu_io always returns 0 causes this
test to fail in a way we happened not to be catching previously:
qemu.utils.VerboseProcessError: Command
'('/home/jsnow/src/qemu/bin/git/tests/qemu-iotests/../../qemu-io',
'--cache', 'writeback', '--aio', 'threads', '-f', 'qcow2', '-c',
'read -P 4 3M 1M',
'/home/jsnow/src/qemu/bin/git/tests/qemu-iotests/scratch/3.img')'
returned non-zero exit status 1.
┏━ output ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
┃ qemu-io: can't open device
┃ /home/jsnow/src/qemu/bin/git/tests/qemu-iotests/scratch/3.img:
┃ Could not open backing file: Could not open backing file: Throttle
┃ group 'tg' does not exist
┗━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
The commit jobs changes the backing file string stored in the image file
header belonging to the node above the commit’s top node to point to the
commit target (the base node). QEMU tries to be as accurate as
possible, and so in these test cases will include the filter that is
part of the block graph in that backing file string (by virtue of making
it a json:{} description of the post-commit subgraph). This makes
little sense outside of QEMU, though: Specifically, the throttle node in
that subgraph will dearly miss its supposedly associated throttle group
object.
When starting the commit job, we can specify a custom backing file
string to write into said image file, so let’s use that feature to write
the plain filename of the backing chain’s next actual image file there.
Explicitly provide the backing file so that opening the file outside of
QEMU (Where we will not have throttle groups) will succeed.
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20220418211504.943969-6-jsnow@redhat.com>
qemu-io fails on read/write beyond end-of-file on raw images, so skip
these invocations when running the zero-length image tests.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220418211504.943969-5-jsnow@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
A forthcoming commit updates qemu_io() to raise an exception on non-zero
return by default, and changes its return type.
In preparation, simplify some calls to qemu_io() that assert that
specific error message strings do not appear in qemu-io's
output. Asserting that all of these calls return a status code of zero
will be a more robust way to guard against failure.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220418211504.943969-4-jsnow@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
The 'read' commands to qemu-io were malformed, and this invocation only
worked by coincidence because the error messages were identical. Oops.
There's no point in checking the patterning of the reference image, so
just check the empty image by itself instead.
(Note: as of this commit, nothing actually enforces that this command
completes successfully, but a forthcoming commit in this series will
enforce that qemu_io() must have a zero status code.)
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220418211504.943969-3-jsnow@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
This makes these callsites a little simpler, but the real motivation is
a forthcoming commit will change the return type of qemu_io(), so removing
users of the return value now is helpful.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220418211504.943969-2-jsnow@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
'blockdev-change-medium' is a convinient wrapper for the following
sequence of commands:
* blockdev-open-tray
* blockdev-remove-medium
* blockdev-insert-medium
* blockdev-close-tray
and should be used f.e. to change ISO image inside the CD-ROM tray.
Though the guest could lock the tray and some linux guests like
CentOS 8.5 actually does that. In this case the execution if this
command results in the error like the following:
Device 'scsi0-0-1-0' is locked and force was not specified,
wait for tray to open and try again.
This situation is could be resolved 'blockdev-open-tray' by passing
flag 'force' inside. Thus is seems reasonable to add the same
capability for 'blockdev-change-medium' too.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@openvz.org>
Acked-by: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
CC: Hanna Reitz <hreitz@redhat.com>
CC: Eric Blake <eblake@redhat.com>
CC: Markus Armbruster <armbru@redhat.com>
Message-Id: <20220412221846.280723-1-den@openvz.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
It always calls the IOMMU MR translate() callback with flag=IOMMU_NONE in
memory_region_iommu_replay(). Currently, smmuv3_translate() return an
IOMMUTLBEntry with perm set to IOMMU_NONE even if the translation success,
whereas it is expected to return the actual permission set in the table
entry.
So pass the actual perm to returned IOMMUTLBEntry in the table entry.
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-id: 1650094695-121918-1-git-send-email-chenxiang66@hisilicon.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use tcg_constant_{i32,i64} as appropriate throughout.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The operation we're performing with the movcond
is either min/max depending on cond -- simplify.
Use tcg_constant_i64 while we're at it.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use tcg_constant_{i32,i64} as appropriate throughout.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use tcg_constant_{i32,i64} as appropriate throughout.
This fixes a bug in trans_VSCCLRM() where we were leaking a TCGv.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The length of the previous insn may be computed from
the difference of start and end addresses.
Use tcg_constant_i32 while we're at it.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use tcg_gen_umin_i32 instead of tcg_gen_movcond_i32.
Use tcg_constant_i32 while we're at it.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Instead of computing
tmp1 = shift & 0xff;
dest = (tmp1 > 0x1f ? 0 : value) << (tmp1 & 0x1f)
use
tmpd = value << (shift & 0x1f);
dest = shift & 0xe0 ? 0 : tmpd;
which has a flatter dependency tree.
Use tcg_constant_i32 while we're at it.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For aa32, the function has a parameter to use the new el.
For aa64, that never happens.
Use tcg_constant_i32 while we're at it.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Common code for reset_btype and set_btype.
Use tcg_constant_i32.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This function is incorrect in that it does not properly consider
CPTR_EL2.FPEN. We've already got another mechanism for raising
an FPU access trap: ARM_CP_FPU, so use that instead.
Remove CP_ACCESS_TRAP_FP_EL{2,3}, which becomes unused.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Bool is a more appropriate type for this value.
Adjust the assignments to use true/false.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Bool is a more appropriate type for this value.
Move the member down in the struct to keep the
bool type members together and remove a hole.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Currently we assume all fields are 32-bit.
Prepare for fields of a single byte, using sizeof_field().
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: use sizeof_field() instead of raw sizeof()]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Bool is a more appropriate type for this value.
Adjust the assignments to use true/false.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Bool is a more appropriate type for this value.
Move the member down in the struct to keep the
bool type members together and remove a hole.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Update SCTLR_ELx fields per ARM DDI0487 H.a.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Update SCR_EL3 fields per ARM DDI0487 H.a.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Update isar fields per ARM DDI0487 H.a.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add support for the TCG GICv4 to the virt board. For the board,
the GICv4 is very similar to the GICv3, with the only difference
being the size of the redistributor frame. The changes here are thus:
* calculating virt_redist_capacity correctly for GICv4
* changing various places which were "if GICv3" to be "if not GICv2"
* the commandline option handling
Note that using GICv4 reduces the maximum possible number of CPUs on
the virt board from 512 to 317, because we can now only fit half as
many redistributors into the redistributor regions we have defined.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220408141550.1271295-42-peter.maydell@linaro.org