Directly calling exit() prevents any kind of management or handling.
Instead use the corresponding runstate API.
The default behavior of the runstate API is the same as exit().
Signed-off-by: Thomas Weißschuh <thomas@t-8ch.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240523-debugexit-v1-1-d52fcaf7bf8b@t-8ch.de>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Log a guest error instead of a hardware error when
the guest tries to DMA to / from an invalid address.
Signed-off-by: Chris Friedt <cfriedt@meta.com>
Message-ID: <20221018122551.94567-3-cfriedt@meta.com>
[thuth: Add missing #include statement, fix error reported by checkpatch.pl]
Signed-off-by: Thomas Huth <thuth@redhat.com>
This serves to make the local variables a bit less ambiguous.
The latter two arguments are named to match DMA_START, and
DMA_SIZE.
Signed-off-by: Chris Friedt <cfriedt@meta.com>
Message-ID: <20221018122551.94567-2-cfriedt@meta.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
In the case that size1 was zero, because of the explicit
'end1 > addr' check, the range check would fail and the error
message would read as shown below. The correct comparison
is 'end1 >= addr'.
EDU: DMA range 0x40000-0x3ffff out of bounds (0x40000-0x40fff)!
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1254
Signed-off-by: Chris Friedt <cfriedt@meta.com>
[thuth: Adjust patch with regards to the "end1 <= end2" check]
Message-ID: <20221018122551.94567-1-cfriedt@meta.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
sprintf() is deprecated on Darwin since macOS 13.0 / XCode 14.1,
resulting in painful developer experience. Use snprintf() instead.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20240411104340.6617-6-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Have applesmc_find_key() return a const pointer.
Since the returned buffers are not modified in
applesmc_io_data_write(), it is pointless to
delete and re-add the keys in the DeviceReset
handler. Add them once in DeviceRealize, and
discard them in the DeviceUnrealize handler.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20240410180819.92332-1-philmd@linaro.org>
We pass a ResetType argument to the Resettable class enter
phase method, but we don't pass it to hold and exit, even though
the callsites have it readily available. This means that if
a device cared about the ResetType it would need to record it
in the enter phase method to use later on. Pass the type to
all three of the phase methods to avoid having to do that.
Commit created with
for dir in hw target include; do \
spatch --macro-file scripts/cocci-macro-file.h \
--sp-file scripts/coccinelle/reset-type.cocci \
--keep-comments --smpl-spacing --in-place \
--include-headers --dir $dir; done
and no manual edits.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Luc Michel <luc.michel@amd.com>
Message-id: 20240412160809.1260625-5-peter.maydell@linaro.org
The npcm7xx_clk and npcm7xx_gcr device reset methods look at
the ResetType argument and only handle RESET_TYPE_COLD,
producing a warning if another reset type is passed. This
is different from how every other three-phase-reset method
we have works, and makes it difficult to add new reset types.
A better pattern is "assume that any reset type you don't know
about should be handled like RESET_TYPE_COLD"; switch these
devices to do that. Then adding a new reset type will only
need to touch those devices where its behaviour really needs
to be different from the standard cold reset.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Luc Michel <luc.michel@amd.com>
Message-id: 20240412160809.1260625-2-peter.maydell@linaro.org
AppleSMCData is allocated with g_new0() in applesmc_add_key():
release it with g_free().
Leaked since commit 1ddda5cd36 ("AppleSMC device emulation").
Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2272
Reported-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20240408095217.57239-3-philmd@linaro.org>
QDev core layer always call DeviceReset() after DeviceRealize(),
no need to do it manually. Remove the extra call.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20240408095217.57239-2-philmd@linaro.org>
The "clock_set_mul_div" function doesn't propagate the clock period
to the children if it is changed (e.g. by enabling/disabling a clock
multiplexer).
This was overlooked during the implementation due to late changes.
This commit propagates the change if the multiplier or divider changes.
Fixes: ec7d83acbd ("hw/misc/stm32l4x5_rcc: Add an internal clock multiplexer object")
Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr>
Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Message-ID: <20240317103918.44375-2-arnaud.minier@telecom-paris.fr>
[PMD: Check clock_set_mul_div() return value]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20240325152827.73817-4-philmd@linaro.org>
Trivial inlining in preliminary patch to make the next
one easier to review.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20240325152827.73817-3-philmd@linaro.org>
The PCA9552 and PCA9554 devices are both I2C GPIO controllers and the
PCA9552 also can drive LEDs. Do all the necessary adjustments to move
the models under hw/gpio.
Cc: Glenn Miles <milesg@linux.vnet.ibm.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Message-ID: <20240325134833.1484265-1-clg@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
* Prefer fast cpu_env() over slower CPU QOM cast macro
-----BEGIN PGP SIGNATURE-----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=NiP4
-----END PGP SIGNATURE-----
Merge tag 'pull-request-2024-03-12' of https://gitlab.com/thuth/qemu into staging
* Add missing ERRP_GUARD() statements in functions that need it
* Prefer fast cpu_env() over slower CPU QOM cast macro
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmXwPhYRHHRodXRoQHJl
# ZGhhdC5jb20ACgkQLtnXdP5wLbWHvBAAgKx5LHFjz3xREVA+LkDTQ49mz0lK3s32
# SGvNlIHjiaDGVttVYhVC4sinBWUruG4Lyv/2QN72OJBzn6WUsEUQE3KPH1d7Y3/s
# wS9X7mj70n4kugWJqeIJP5AXSRasHmWoQ4QJLVQRJd6+Eb9jqwep0x7bYkI1de6D
# bL1Q7bIfkFeNQBXaiPWAm2i+hqmT4C1r8HEAGZIjAsMFrjy/hzBEjNV+pnh6ZSq9
# Vp8BsPWRfLU2XHm4WX0o8d89WUMAfUGbVkddEl/XjIHDrUD+Zbd1HAhLyfhsmrnE
# jXIwSzm+ML1KX4MoF5ilGtg8Oo0gQDEBy9/xck6G0HCm9lIoLKlgTxK9glr2vdT8
# yxZmrM9Hder7F9hKKxmb127xgU6AmL7rYmVqsoQMNAq22D6Xr4UDpgFRXNk2/wO6
# zZZBkfZ4H4MpZXbd/KJpXvYH5mQA4IpkOy8LJdE+dbcHX7Szy9ksZdPA+Z10hqqf
# zqS13qTs3abxymy2Q/tO3hPKSJCk1+vCGUkN60Wm+9VoLWGoU43qMc7gnY/pCS7m
# 0rFKtvfwFHhokX1orK0lP/ppVzPv/5oFIeK8YDY9if+N+dU2LCwVZHIuf2/VJPRq
# wmgH2vAn3JDoRKPxTGX9ly6AMxuZaeP92qBTOPap0gDhihYzIpaCq9ecEBoTakI7
# tdFhV0iRr08=
# =NiP4
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 12 Mar 2024 11:35:50 GMT
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* tag 'pull-request-2024-03-12' of https://gitlab.com/thuth/qemu: (55 commits)
user: Prefer fast cpu_env() over slower CPU QOM cast macro
target/xtensa: Prefer fast cpu_env() over slower CPU QOM cast macro
target/tricore: Prefer fast cpu_env() over slower CPU QOM cast macro
target/sparc: Prefer fast cpu_env() over slower CPU QOM cast macro
target/sh4: Prefer fast cpu_env() over slower CPU QOM cast macro
target/rx: Prefer fast cpu_env() over slower CPU QOM cast macro
target/ppc: Prefer fast cpu_env() over slower CPU QOM cast macro
target/openrisc: Prefer fast cpu_env() over slower CPU QOM cast macro
target/nios2: Prefer fast cpu_env() over slower CPU QOM cast macro
target/mips: Prefer fast cpu_env() over slower CPU QOM cast macro
target/microblaze: Prefer fast cpu_env() over slower CPU QOM cast macro
target/m68k: Prefer fast cpu_env() over slower CPU QOM cast macro
target/loongarch: Prefer fast cpu_env() over slower CPU QOM cast macro
target/i386/hvf: Use CPUState typedef
target/hexagon: Prefer fast cpu_env() over slower CPU QOM cast macro
target/cris: Prefer fast cpu_env() over slower CPU QOM cast macro
target/avr: Prefer fast cpu_env() over slower CPU QOM cast macro
target/alpha: Prefer fast cpu_env() over slower CPU QOM cast macro
target: Replace CPU_GET_CLASS(cpu -> obj) in cpu_reset_hold() handler
bulk: Call in place single use cpu_env()
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When a variable is initialized to &struct->field, use it
in place. Rationale: while this makes the code more concise,
this also helps static analyzers.
Mechanical change using the following Coccinelle spatch script:
@@
type S, F;
identifier s, m, v;
@@
S *s;
...
F *v = &s->m;
<+...
- &s->m
+ v
...+>
Inspired-by: Zhao Liu <zhao1.liu@intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240129164514.73104-2-philmd@linaro.org>
Acked-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
[thuth: Dropped hunks that need a rebase, and fixed sizeof() in pmu_realize()]
Signed-off-by: Thomas Huth <thuth@redhat.com>
As the comment in qapi/error, dereferencing @errp requires
ERRP_GUARD():
* = Why, when and how to use ERRP_GUARD() =
*
* Without ERRP_GUARD(), use of the @errp parameter is restricted:
* - It must not be dereferenced, because it may be null.
...
* ERRP_GUARD() lifts these restrictions.
*
* To use ERRP_GUARD(), add it right at the beginning of the function.
* @errp can then be used without worrying about the argument being
* NULL or &error_fatal.
*
* Using it when it's not needed is safe, but please avoid cluttering
* the source with useless code.
But in trng_prop_fault_event_set, @errp is dereferenced without
ERRP_GUARD():
visit_type_uint32(v, name, events, errp);
if (*errp) {
return;
}
Currently, since trng_prop_fault_event_set() doesn't get the NULL @errp
parameter as a "set" method of object property, it hasn't triggered the
bug that dereferencing the NULL @errp.
And since visit_type_uint32() returns bool, check the returned bool
directly instead of dereferencing @errp, then we needn't the add missing
ERRP_GUARD().
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240223085653.1255438-5-zhao1.liu@linux.intel.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
As the comment in qapi/error, passing @errp to error_prepend() requires
ERRP_GUARD():
* = Why, when and how to use ERRP_GUARD() =
*
* Without ERRP_GUARD(), use of the @errp parameter is restricted:
...
* - It should not be passed to error_prepend(), error_vprepend() or
* error_append_hint(), because that doesn't work with &error_fatal.
* ERRP_GUARD() lifts these restrictions.
*
* To use ERRP_GUARD(), add it right at the beginning of the function.
* @errp can then be used without worrying about the argument being
* NULL or &error_fatal.
ERRP_GUARD() could avoid the case when @errp is &error_fatal, the user
can't see this additional information, because exit() happens in
error_setg earlier than information is added [1].
The ivshmem_common_realize() passes @errp to error_prepend(), and as a
DeviceClass.realize method, there are too many possible callers to check
the impact of this defect; it may or may not be harmless. Thus it is
necessary to protect @errp with ERRP_GUARD().
To avoid the issue like [1] said, add missing ERRP_GUARD() at the
beginning of this function.
[1]: Issue description in the commit message of commit ae7c80a7bd
("error: New macro ERRP_GUARD()").
Cc: Juan Quintela <quintela@trasno.org>
Cc: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Cc: Michael Galaxy <mgalaxy@akamai.com>
Cc: Steve Sistare <steven.sistare@oracle.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Message-ID: <20240311033822.3142585-17-zhao1.liu@linux.intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Add write protections for the fields in the CR register.
PLL configuration write protections (among others) have not
been handled yet. This is planned in a future patch set.
Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr>
Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Message-id: 20240303140643.81957-7-arnaud.minier@telecom-paris.fr
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Update the RCC state and propagate frequency changes when writing to the
RCC registers. Currently, ICSCR, CIER, the reset registers and the stop
mode registers are not implemented.
Some fields have not been implemented due to uncertainty about
how to handle them (Like the clock security system or bypassing
mecanisms).
Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr>
Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Message-id: 20240303140643.81957-6-arnaud.minier@telecom-paris.fr
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Instantiate the whole clock tree and using the Clock multiplexers and
the PLLs defined in the previous commits. This allows to statically
define the clock tree and easily follow the clock signal from one end to
another.
Also handle three-phase reset now that we have defined a known base
state for every object.
(Reset handling based on hw/misc/zynq_sclr.c)
Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr>
Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Message-id: 20240303140643.81957-5-arnaud.minier@telecom-paris.fr
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
This object represents the PLLs and their channels. The PLLs allow for a
more fine-grained control of the clocks frequency.
The migration handling is based on hw/misc/zynq_sclr.c.
Three phase reset will be handled in a later commit.
Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr>
Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Message-id: 20240303140643.81957-4-arnaud.minier@telecom-paris.fr
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
This object is used to represent every multiplexer in the clock tree as
well as every clock output, every presecaler, frequency multiplier, etc.
This allows to use a generic approach for every component of the clock tree
(except the PLLs).
The migration handling is based on hw/misc/zynq_sclr.c.
Three phase reset will be handled in a later commit.
Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr>
Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20240303140643.81957-3-arnaud.minier@telecom-paris.fr
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Add the necessary files to add a simple RCC implementation with just
reads from and writes to registers. Also instantiate the RCC in the
STM32L4x5_SoC. It is needed for accurate emulation of all the SoC
clocks and timers.
Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr>
Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240303140643.81957-2-arnaud.minier@telecom-paris.fr
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Our model of the bcm2835 mailbox is missing a few properties
that we need for the raspi4 kernel:
* RPI_FWREQ_GET_CLOCKS
* RPI_FWREQ_GET_THROTTLED
* RPI_FWREQ_VCHIQ_INIT
Add minimal implementations of them.
Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com>
Message-id: 20240226000259.2752893-40-sergey.kambalin@auriga.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: improved commit message]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
For powernv10-rainier, the Power Hypervisor code expects to see a
pca9554 device connected to the 3rd PNV I2C engine on port 1 at I2C
address 0x25 (or left-justified address of 0x4A). This is used by
the hypervisor code to detect if a "Cable Card" is present.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Glenn Miles <milesg@linux.vnet.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Specs are available here:
https://www.nxp.com/docs/en/data-sheet/PCA9554_9554A.pdf
This is a simple model supporting the basic registers for GPIO
mode. The device also supports an interrupt output line but the
model does not yet support this.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Glenn Miles <milesg@linux.vnet.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Allow external devices to drive pca9552 input pins by adding
input GPIO's to the model. This allows a device to connect
its output GPIO's to the pca9552 input GPIO's.
In order for an external device to set the state of a pca9552
pin, the pin must first be configured for high impedance (LED
is off). If the pca9552 pin is configured to drive the pin low
(LED is on), then external input will be ignored.
Here is a table describing the logical state of a pca9552 pin
given the state being driven by the pca9552 and an external device:
PCA9552
Configured
State
| Hi-Z | Low |
------+------+-----+
External Hi-Z | Hi | Low |
Device ------+------+-----+
State Low | Low | Low |
------+------+-----+
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Glenn Miles <milesg@linux.vnet.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The pca9552 INPUT0 and INPUT1 registers are supposed to
hold the logical values of the LED pins. A logical 0
should be seen in the INPUT0/1 registers for a pin when
its corresponding LSn bits are set to 0, which is also
the state needed for turning on an LED in a typical
usage scenario. Existing code was doing the opposite
and setting INPUT0/1 bit to a 1 when the LSn bit was
set to 0, so this commit fixes that.
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Glenn Miles <milesg@linux.vnet.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
We should not wire IRQs on unrealized device.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240213130341.1793-7-philmd@linaro.org>
This field is not set. Remove it along with the dead
code it was guarding.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240209090513.9401-7-philmd@linaro.org>
Since previous commit the MIPSITUState::cpu0 field is not
used anymore. Remove it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240209090513.9401-6-philmd@linaro.org>
This field is never set, so remove the unreachable code.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240209090513.9401-5-philmd@linaro.org>
Previous commit removed the MT*C0(SAAR) helpers which
were the only calls to itc_reconfigure() out of hw/,
we can reduce its scope and declare it statically.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240209090513.9401-3-philmd@linaro.org>
The MPS2 SCC device is broadly the same for all FPGA images, but has
minor differences in the behaviour of the CFG registers depending on
the image. In many cases we don't really care about the functionality
controlled by these registers and a reads-as-written or similar
behaviour is sufficient for the moment.
For the AN536 the required behaviour is:
* A_CFG0 has CPU reset and halt bits
- implement as reads-as-written for the moment
* A_CFG1 has flash or ATCM address 0 remap handling
- QEMU doesn't model this; implement as reads-as-written
* A_CFG2 has QSPI select (like AN524)
- implemented (no behaviour, as with AN524)
* A_CFG3 is MCC_MSB_ADDR "additional MCC addressing bits"
- QEMU doesn't care about these, so use the existing
RAZ behaviour for convenience
* A_CFG4 is board rev (like all other images)
- no change needed
* A_CFG5 is ACLK frq in hz (like AN524)
- implemented as reads-as-written, as for other boards
* A_CFG6 is core 0 vector table base address
- implemented as reads-as-written for the moment
* A_CFG7 is core 1 vector table base address
- implemented as reads-as-written for the moment
Make the changes necessary for this; leave TODO comments where
appropriate to indicate where we might want to come back and
implement things like CPU reset.
The other aspects of the device specific to this FPGA image (like the
values of the board ID and similar registers) will be set via the
device's qdev properties.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240206132931.38376-8-peter.maydell@linaro.org
The MPS SCC device has a lot of different flavours for the various
different MPS FPGA images, which look mostly similar but have
differences in how particular registers are handled. Currently we
deal with this with a lot of open-coded checks on scc_partno(), but
as we add more board types this is getting a bit hard to read.
Factor out the conditions into some functions which we can
give more descriptive names to.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240206132931.38376-7-peter.maydell@linaro.org
We currently guard the CFG3 register read with
(scc_partno(s) == 0x524 && scc_partno(s) == 0x547)
which is clearly wrong as it is never true.
This register is present on all board types except AN524
and AN527; correct the condition.
Fixes: 6ac8081894 ("hw/misc/mps2-scc: Implement changes for AN547")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240206132931.38376-6-peter.maydell@linaro.org
Linux writes zeroes at bootup into the default ports for LASI audio and
LASI floppy controller to reset those devices. Allow writing to those
registers to avoid HPMCs.
Signed-off-by: Helge Deller <deller@gmx.de>
Firmware and qemu reads and writes the MAC address for the LASI LAN via
registers in LASI. Allow those accesses and return zero even if LASI
LAN isn't enabled to avoid HPMCs (=crashes).
Signed-off-by: Helge Deller <deller@gmx.de>
hw/misc/xlnx-versal-crl.c doesn't require "cpu.h"
anymore. By removing it, the unit become target
agnostic: we can build it once. Update meson.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240118200643.29037-15-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
"target/arm/cpu.h" is target specific, any file including it
becomes target specific too, thus this is the same for any file
including "hw/misc/xlnx-versal-crl.h".
"hw/misc/xlnx-versal-crl.h" doesn't require any target specific
definition however, only the target-agnostic QOM definitions
from "target/arm/cpu-qom.h". Include the latter header to avoid
tainting unnecessary objects as target-specific.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240118200643.29037-14-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Declare arm_cpu_mp_affinity() prototype in the new
"target/arm/multiprocessing.h" header so units in
hw/arm/ can use it without having to include the huge
target-specific "cpu.h".
File list to include the new header generated using:
$ git grep -lw arm_cpu_mp_affinity
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240118200643.29037-11-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Wrapper to return the mp affinity bits from the cpu.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240118200643.29037-10-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Although very similar to the STM32F4xx EXTI, STM32L4x5 EXTI generates
more than 32 event/interrupt requests and thus uses more registers
than STM32F4xx EXTI which generates 23 event/interrupt requests.
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr>
Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240109160658.311932-2-ines.varhol@telecom-paris.fr
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The Big QEMU Lock (BQL) has many names and they are confusing. The
actual QemuMutex variable is called qemu_global_mutex but it's commonly
referred to as the BQL in discussions and some code comments. The
locking APIs, however, are called qemu_mutex_lock_iothread() and
qemu_mutex_unlock_iothread().
The "iothread" name is historic and comes from when the main thread was
split into into KVM vcpu threads and the "iothread" (now called the main
loop thread). I have contributed to the confusion myself by introducing
a separate --object iothread, a separate concept unrelated to the BQL.
The "iothread" name is no longer appropriate for the BQL. Rename the
locking APIs to:
- void bql_lock(void)
- void bql_unlock(void)
- bool bql_locked(void)
There are more APIs with "iothread" in their names. Subsequent patches
will rename them. There are also comments and documentation that will be
updated in later patches.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Acked-by: Fabiano Rosas <farosas@suse.de>
Acked-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Peter Xu <peterx@redhat.com>
Acked-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Acked-by: Hyman Huang <yong.huang@smartx.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-id: 20240102153529.486531-2-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The edu_check_range function checks that start <= end1 < end2, where
end1 is the upper bound (exclusive) of the guest-supplied DMA range and
end2 is the upper bound (exclusive) of the device's allowed DMA range.
When the guest tries to transfer exactly DMA_SIZE (4096) bytes, end1
will be equal to end2, so the check fails and QEMU aborts with this
puzzling error message (newlines added for formatting):
qemu: hardware error: EDU: DMA range
0x0000000000040000-0x0000000000040fff out of bounds
(0x0000000000040000-0x0000000000040fff)!
By checking end1 <= end2 instead, guests will be allowed to transfer
exactly 4096 bytes. It is not necessary to explicitly check for
start <= end1 because the previous two checks (within(addr, start, end2)
and end1 > addr) imply start < end1.
Fixes: b30934cb52 ("hw: misc, add educational driver", 2015-01-21)
Signed-off-by: Max Erenberg <merenber@uwaterloo.ca>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
