qemu/hw/pci-host/pnv_phb4_pec.c

Ignoring revisions in .git-blame-ignore-revs. Click here to bypass and see the normal blame view.

409 lines
12 KiB
C
Raw Normal View History

ppc/pnv: Add models for POWER9 PHB4 PCIe Host bridge These changes introduces models for the PCIe Host Bridge (PHB4) of the POWER9 processor. It includes the PowerBus logic interface (PBCQ), IOMMU support, a single PCIe Gen.4 Root Complex, and support for MSI and LSI interrupt sources as found on a POWER9 system using the XIVE interrupt controller. POWER9 processor comes with 3 PHB4 PEC (PCI Express Controller) and each PEC can have several PHBs. By default, * PEC0 provides 1 PHB (PHB0) * PEC1 provides 2 PHBs (PHB1 and PHB2) * PEC2 provides 3 PHBs (PHB3, PHB4 and PHB5) Each PEC has a set "global" registers and some "per-stack" (per-PHB) registers. Those are organized in two XSCOM ranges, the "Nest" range and the "PCI" range, each range contains both some "PEC" registers and some "per-stack" registers. No default device layout is provided and PCI devices can be added on any of the available PCIe Root Port (pcie.0 .. 2 of a Power9 chip) with address 0x0 as the firwware (skiboot) only accepts a single device per root port. To run a simple system with a network and a storage adapters, use a command line options such as : -device e1000e,netdev=net0,mac=C0:FF:EE:00:00:02,bus=pcie.0,addr=0x0 -netdev bridge,id=net0,helper=/usr/libexec/qemu-bridge-helper,br=virbr0,id=hostnet0 -device megasas,id=scsi0,bus=pcie.1,addr=0x0 -drive file=$disk,if=none,id=drive-scsi0-0-0-0,format=qcow2,cache=none -device scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=0,drive=drive-scsi0-0-0-0,id=scsi0-0-0-0,bootindex=2 If more are needed, include a bridge. Multi chip is supported, each chip adding its set of PHB4 controllers and its PCI busses. The model doesn't emulate the EEH error handling. This model is not ready for hotplug yet. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [ clg: - numerous cleanups - commit log - fix for broken LSI support - PHB pic printinfo - large QOM rework ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20200127144506.11132-2-clg@kaod.org> [dwg: Use device_class_set_props()] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-01-27 17:45:05 +03:00
/*
* QEMU PowerPC PowerNV (POWER9) PHB4 model
*
* Copyright (c) 2018-2020, IBM Corporation.
*
* This code is licensed under the GPL version 2 or later. See the
* COPYING file in the top-level directory.
*/
#include "qemu/osdep.h"
#include "qapi/error.h"
#include "qemu/log.h"
#include "target/ppc/cpu.h"
#include "hw/ppc/fdt.h"
#include "hw/pci-host/pnv_phb4_regs.h"
#include "hw/pci-host/pnv_phb4.h"
#include "hw/ppc/pnv_xscom.h"
#include "hw/pci/pci_bridge.h"
#include "hw/pci/pci_bus.h"
#include "hw/ppc/pnv.h"
#include "hw/ppc/pnv_chip.h"
ppc/pnv: Add models for POWER9 PHB4 PCIe Host bridge These changes introduces models for the PCIe Host Bridge (PHB4) of the POWER9 processor. It includes the PowerBus logic interface (PBCQ), IOMMU support, a single PCIe Gen.4 Root Complex, and support for MSI and LSI interrupt sources as found on a POWER9 system using the XIVE interrupt controller. POWER9 processor comes with 3 PHB4 PEC (PCI Express Controller) and each PEC can have several PHBs. By default, * PEC0 provides 1 PHB (PHB0) * PEC1 provides 2 PHBs (PHB1 and PHB2) * PEC2 provides 3 PHBs (PHB3, PHB4 and PHB5) Each PEC has a set "global" registers and some "per-stack" (per-PHB) registers. Those are organized in two XSCOM ranges, the "Nest" range and the "PCI" range, each range contains both some "PEC" registers and some "per-stack" registers. No default device layout is provided and PCI devices can be added on any of the available PCIe Root Port (pcie.0 .. 2 of a Power9 chip) with address 0x0 as the firwware (skiboot) only accepts a single device per root port. To run a simple system with a network and a storage adapters, use a command line options such as : -device e1000e,netdev=net0,mac=C0:FF:EE:00:00:02,bus=pcie.0,addr=0x0 -netdev bridge,id=net0,helper=/usr/libexec/qemu-bridge-helper,br=virbr0,id=hostnet0 -device megasas,id=scsi0,bus=pcie.1,addr=0x0 -drive file=$disk,if=none,id=drive-scsi0-0-0-0,format=qcow2,cache=none -device scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=0,drive=drive-scsi0-0-0-0,id=scsi0-0-0-0,bootindex=2 If more are needed, include a bridge. Multi chip is supported, each chip adding its set of PHB4 controllers and its PCI busses. The model doesn't emulate the EEH error handling. This model is not ready for hotplug yet. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [ clg: - numerous cleanups - commit log - fix for broken LSI support - PHB pic printinfo - large QOM rework ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20200127144506.11132-2-clg@kaod.org> [dwg: Use device_class_set_props()] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-01-27 17:45:05 +03:00
#include "hw/qdev-properties.h"
#include "sysemu/sysemu.h"
ppc/pnv: Add models for POWER9 PHB4 PCIe Host bridge These changes introduces models for the PCIe Host Bridge (PHB4) of the POWER9 processor. It includes the PowerBus logic interface (PBCQ), IOMMU support, a single PCIe Gen.4 Root Complex, and support for MSI and LSI interrupt sources as found on a POWER9 system using the XIVE interrupt controller. POWER9 processor comes with 3 PHB4 PEC (PCI Express Controller) and each PEC can have several PHBs. By default, * PEC0 provides 1 PHB (PHB0) * PEC1 provides 2 PHBs (PHB1 and PHB2) * PEC2 provides 3 PHBs (PHB3, PHB4 and PHB5) Each PEC has a set "global" registers and some "per-stack" (per-PHB) registers. Those are organized in two XSCOM ranges, the "Nest" range and the "PCI" range, each range contains both some "PEC" registers and some "per-stack" registers. No default device layout is provided and PCI devices can be added on any of the available PCIe Root Port (pcie.0 .. 2 of a Power9 chip) with address 0x0 as the firwware (skiboot) only accepts a single device per root port. To run a simple system with a network and a storage adapters, use a command line options such as : -device e1000e,netdev=net0,mac=C0:FF:EE:00:00:02,bus=pcie.0,addr=0x0 -netdev bridge,id=net0,helper=/usr/libexec/qemu-bridge-helper,br=virbr0,id=hostnet0 -device megasas,id=scsi0,bus=pcie.1,addr=0x0 -drive file=$disk,if=none,id=drive-scsi0-0-0-0,format=qcow2,cache=none -device scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=0,drive=drive-scsi0-0-0-0,id=scsi0-0-0-0,bootindex=2 If more are needed, include a bridge. Multi chip is supported, each chip adding its set of PHB4 controllers and its PCI busses. The model doesn't emulate the EEH error handling. This model is not ready for hotplug yet. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [ clg: - numerous cleanups - commit log - fix for broken LSI support - PHB pic printinfo - large QOM rework ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20200127144506.11132-2-clg@kaod.org> [dwg: Use device_class_set_props()] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-01-27 17:45:05 +03:00
#include <libfdt.h>
#define phb_pec_error(pec, fmt, ...) \
qemu_log_mask(LOG_GUEST_ERROR, "phb4_pec[%d:%d]: " fmt "\n", \
(pec)->chip_id, (pec)->index, ## __VA_ARGS__)
static uint64_t pnv_pec_nest_xscom_read(void *opaque, hwaddr addr,
unsigned size)
{
PnvPhb4PecState *pec = PNV_PHB4_PEC(opaque);
uint32_t reg = addr >> 3;
/* All registers are readable */
ppc/pnv: Add models for POWER9 PHB4 PCIe Host bridge These changes introduces models for the PCIe Host Bridge (PHB4) of the POWER9 processor. It includes the PowerBus logic interface (PBCQ), IOMMU support, a single PCIe Gen.4 Root Complex, and support for MSI and LSI interrupt sources as found on a POWER9 system using the XIVE interrupt controller. POWER9 processor comes with 3 PHB4 PEC (PCI Express Controller) and each PEC can have several PHBs. By default, * PEC0 provides 1 PHB (PHB0) * PEC1 provides 2 PHBs (PHB1 and PHB2) * PEC2 provides 3 PHBs (PHB3, PHB4 and PHB5) Each PEC has a set "global" registers and some "per-stack" (per-PHB) registers. Those are organized in two XSCOM ranges, the "Nest" range and the "PCI" range, each range contains both some "PEC" registers and some "per-stack" registers. No default device layout is provided and PCI devices can be added on any of the available PCIe Root Port (pcie.0 .. 2 of a Power9 chip) with address 0x0 as the firwware (skiboot) only accepts a single device per root port. To run a simple system with a network and a storage adapters, use a command line options such as : -device e1000e,netdev=net0,mac=C0:FF:EE:00:00:02,bus=pcie.0,addr=0x0 -netdev bridge,id=net0,helper=/usr/libexec/qemu-bridge-helper,br=virbr0,id=hostnet0 -device megasas,id=scsi0,bus=pcie.1,addr=0x0 -drive file=$disk,if=none,id=drive-scsi0-0-0-0,format=qcow2,cache=none -device scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=0,drive=drive-scsi0-0-0-0,id=scsi0-0-0-0,bootindex=2 If more are needed, include a bridge. Multi chip is supported, each chip adding its set of PHB4 controllers and its PCI busses. The model doesn't emulate the EEH error handling. This model is not ready for hotplug yet. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [ clg: - numerous cleanups - commit log - fix for broken LSI support - PHB pic printinfo - large QOM rework ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20200127144506.11132-2-clg@kaod.org> [dwg: Use device_class_set_props()] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-01-27 17:45:05 +03:00
return pec->nest_regs[reg];
}
static void pnv_pec_nest_xscom_write(void *opaque, hwaddr addr,
uint64_t val, unsigned size)
{
PnvPhb4PecState *pec = PNV_PHB4_PEC(opaque);
uint32_t reg = addr >> 3;
switch (reg) {
case PEC_NEST_DROP_PRIO_CTRL:
pec->nest_regs[reg] = val & PPC_BITMASK(0, 25);
break;
ppc/pnv: Add models for POWER9 PHB4 PCIe Host bridge These changes introduces models for the PCIe Host Bridge (PHB4) of the POWER9 processor. It includes the PowerBus logic interface (PBCQ), IOMMU support, a single PCIe Gen.4 Root Complex, and support for MSI and LSI interrupt sources as found on a POWER9 system using the XIVE interrupt controller. POWER9 processor comes with 3 PHB4 PEC (PCI Express Controller) and each PEC can have several PHBs. By default, * PEC0 provides 1 PHB (PHB0) * PEC1 provides 2 PHBs (PHB1 and PHB2) * PEC2 provides 3 PHBs (PHB3, PHB4 and PHB5) Each PEC has a set "global" registers and some "per-stack" (per-PHB) registers. Those are organized in two XSCOM ranges, the "Nest" range and the "PCI" range, each range contains both some "PEC" registers and some "per-stack" registers. No default device layout is provided and PCI devices can be added on any of the available PCIe Root Port (pcie.0 .. 2 of a Power9 chip) with address 0x0 as the firwware (skiboot) only accepts a single device per root port. To run a simple system with a network and a storage adapters, use a command line options such as : -device e1000e,netdev=net0,mac=C0:FF:EE:00:00:02,bus=pcie.0,addr=0x0 -netdev bridge,id=net0,helper=/usr/libexec/qemu-bridge-helper,br=virbr0,id=hostnet0 -device megasas,id=scsi0,bus=pcie.1,addr=0x0 -drive file=$disk,if=none,id=drive-scsi0-0-0-0,format=qcow2,cache=none -device scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=0,drive=drive-scsi0-0-0-0,id=scsi0-0-0-0,bootindex=2 If more are needed, include a bridge. Multi chip is supported, each chip adding its set of PHB4 controllers and its PCI busses. The model doesn't emulate the EEH error handling. This model is not ready for hotplug yet. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [ clg: - numerous cleanups - commit log - fix for broken LSI support - PHB pic printinfo - large QOM rework ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20200127144506.11132-2-clg@kaod.org> [dwg: Use device_class_set_props()] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-01-27 17:45:05 +03:00
case PEC_NEST_PBCQ_ERR_INJECT:
pec->nest_regs[reg] = val & PPC_BITMASK(0, 11);
break;
ppc/pnv: Add models for POWER9 PHB4 PCIe Host bridge These changes introduces models for the PCIe Host Bridge (PHB4) of the POWER9 processor. It includes the PowerBus logic interface (PBCQ), IOMMU support, a single PCIe Gen.4 Root Complex, and support for MSI and LSI interrupt sources as found on a POWER9 system using the XIVE interrupt controller. POWER9 processor comes with 3 PHB4 PEC (PCI Express Controller) and each PEC can have several PHBs. By default, * PEC0 provides 1 PHB (PHB0) * PEC1 provides 2 PHBs (PHB1 and PHB2) * PEC2 provides 3 PHBs (PHB3, PHB4 and PHB5) Each PEC has a set "global" registers and some "per-stack" (per-PHB) registers. Those are organized in two XSCOM ranges, the "Nest" range and the "PCI" range, each range contains both some "PEC" registers and some "per-stack" registers. No default device layout is provided and PCI devices can be added on any of the available PCIe Root Port (pcie.0 .. 2 of a Power9 chip) with address 0x0 as the firwware (skiboot) only accepts a single device per root port. To run a simple system with a network and a storage adapters, use a command line options such as : -device e1000e,netdev=net0,mac=C0:FF:EE:00:00:02,bus=pcie.0,addr=0x0 -netdev bridge,id=net0,helper=/usr/libexec/qemu-bridge-helper,br=virbr0,id=hostnet0 -device megasas,id=scsi0,bus=pcie.1,addr=0x0 -drive file=$disk,if=none,id=drive-scsi0-0-0-0,format=qcow2,cache=none -device scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=0,drive=drive-scsi0-0-0-0,id=scsi0-0-0-0,bootindex=2 If more are needed, include a bridge. Multi chip is supported, each chip adding its set of PHB4 controllers and its PCI busses. The model doesn't emulate the EEH error handling. This model is not ready for hotplug yet. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [ clg: - numerous cleanups - commit log - fix for broken LSI support - PHB pic printinfo - large QOM rework ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20200127144506.11132-2-clg@kaod.org> [dwg: Use device_class_set_props()] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-01-27 17:45:05 +03:00
case PEC_NEST_PCI_NEST_CLK_TRACE_CTL:
pec->nest_regs[reg] = val & PPC_BITMASK(0, 16);
break;
ppc/pnv: Add models for POWER9 PHB4 PCIe Host bridge These changes introduces models for the PCIe Host Bridge (PHB4) of the POWER9 processor. It includes the PowerBus logic interface (PBCQ), IOMMU support, a single PCIe Gen.4 Root Complex, and support for MSI and LSI interrupt sources as found on a POWER9 system using the XIVE interrupt controller. POWER9 processor comes with 3 PHB4 PEC (PCI Express Controller) and each PEC can have several PHBs. By default, * PEC0 provides 1 PHB (PHB0) * PEC1 provides 2 PHBs (PHB1 and PHB2) * PEC2 provides 3 PHBs (PHB3, PHB4 and PHB5) Each PEC has a set "global" registers and some "per-stack" (per-PHB) registers. Those are organized in two XSCOM ranges, the "Nest" range and the "PCI" range, each range contains both some "PEC" registers and some "per-stack" registers. No default device layout is provided and PCI devices can be added on any of the available PCIe Root Port (pcie.0 .. 2 of a Power9 chip) with address 0x0 as the firwware (skiboot) only accepts a single device per root port. To run a simple system with a network and a storage adapters, use a command line options such as : -device e1000e,netdev=net0,mac=C0:FF:EE:00:00:02,bus=pcie.0,addr=0x0 -netdev bridge,id=net0,helper=/usr/libexec/qemu-bridge-helper,br=virbr0,id=hostnet0 -device megasas,id=scsi0,bus=pcie.1,addr=0x0 -drive file=$disk,if=none,id=drive-scsi0-0-0-0,format=qcow2,cache=none -device scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=0,drive=drive-scsi0-0-0-0,id=scsi0-0-0-0,bootindex=2 If more are needed, include a bridge. Multi chip is supported, each chip adding its set of PHB4 controllers and its PCI busses. The model doesn't emulate the EEH error handling. This model is not ready for hotplug yet. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [ clg: - numerous cleanups - commit log - fix for broken LSI support - PHB pic printinfo - large QOM rework ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20200127144506.11132-2-clg@kaod.org> [dwg: Use device_class_set_props()] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-01-27 17:45:05 +03:00
case PEC_NEST_PBCQ_PMON_CTRL:
pec->nest_regs[reg] = val & PPC_BITMASK(0, 37);
break;
ppc/pnv: Add models for POWER9 PHB4 PCIe Host bridge These changes introduces models for the PCIe Host Bridge (PHB4) of the POWER9 processor. It includes the PowerBus logic interface (PBCQ), IOMMU support, a single PCIe Gen.4 Root Complex, and support for MSI and LSI interrupt sources as found on a POWER9 system using the XIVE interrupt controller. POWER9 processor comes with 3 PHB4 PEC (PCI Express Controller) and each PEC can have several PHBs. By default, * PEC0 provides 1 PHB (PHB0) * PEC1 provides 2 PHBs (PHB1 and PHB2) * PEC2 provides 3 PHBs (PHB3, PHB4 and PHB5) Each PEC has a set "global" registers and some "per-stack" (per-PHB) registers. Those are organized in two XSCOM ranges, the "Nest" range and the "PCI" range, each range contains both some "PEC" registers and some "per-stack" registers. No default device layout is provided and PCI devices can be added on any of the available PCIe Root Port (pcie.0 .. 2 of a Power9 chip) with address 0x0 as the firwware (skiboot) only accepts a single device per root port. To run a simple system with a network and a storage adapters, use a command line options such as : -device e1000e,netdev=net0,mac=C0:FF:EE:00:00:02,bus=pcie.0,addr=0x0 -netdev bridge,id=net0,helper=/usr/libexec/qemu-bridge-helper,br=virbr0,id=hostnet0 -device megasas,id=scsi0,bus=pcie.1,addr=0x0 -drive file=$disk,if=none,id=drive-scsi0-0-0-0,format=qcow2,cache=none -device scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=0,drive=drive-scsi0-0-0-0,id=scsi0-0-0-0,bootindex=2 If more are needed, include a bridge. Multi chip is supported, each chip adding its set of PHB4 controllers and its PCI busses. The model doesn't emulate the EEH error handling. This model is not ready for hotplug yet. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [ clg: - numerous cleanups - commit log - fix for broken LSI support - PHB pic printinfo - large QOM rework ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20200127144506.11132-2-clg@kaod.org> [dwg: Use device_class_set_props()] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-01-27 17:45:05 +03:00
case PEC_NEST_PBCQ_PBUS_ADDR_EXT:
pec->nest_regs[reg] = val & PPC_BITMASK(0, 6);
break;
ppc/pnv: Add models for POWER9 PHB4 PCIe Host bridge These changes introduces models for the PCIe Host Bridge (PHB4) of the POWER9 processor. It includes the PowerBus logic interface (PBCQ), IOMMU support, a single PCIe Gen.4 Root Complex, and support for MSI and LSI interrupt sources as found on a POWER9 system using the XIVE interrupt controller. POWER9 processor comes with 3 PHB4 PEC (PCI Express Controller) and each PEC can have several PHBs. By default, * PEC0 provides 1 PHB (PHB0) * PEC1 provides 2 PHBs (PHB1 and PHB2) * PEC2 provides 3 PHBs (PHB3, PHB4 and PHB5) Each PEC has a set "global" registers and some "per-stack" (per-PHB) registers. Those are organized in two XSCOM ranges, the "Nest" range and the "PCI" range, each range contains both some "PEC" registers and some "per-stack" registers. No default device layout is provided and PCI devices can be added on any of the available PCIe Root Port (pcie.0 .. 2 of a Power9 chip) with address 0x0 as the firwware (skiboot) only accepts a single device per root port. To run a simple system with a network and a storage adapters, use a command line options such as : -device e1000e,netdev=net0,mac=C0:FF:EE:00:00:02,bus=pcie.0,addr=0x0 -netdev bridge,id=net0,helper=/usr/libexec/qemu-bridge-helper,br=virbr0,id=hostnet0 -device megasas,id=scsi0,bus=pcie.1,addr=0x0 -drive file=$disk,if=none,id=drive-scsi0-0-0-0,format=qcow2,cache=none -device scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=0,drive=drive-scsi0-0-0-0,id=scsi0-0-0-0,bootindex=2 If more are needed, include a bridge. Multi chip is supported, each chip adding its set of PHB4 controllers and its PCI busses. The model doesn't emulate the EEH error handling. This model is not ready for hotplug yet. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [ clg: - numerous cleanups - commit log - fix for broken LSI support - PHB pic printinfo - large QOM rework ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20200127144506.11132-2-clg@kaod.org> [dwg: Use device_class_set_props()] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-01-27 17:45:05 +03:00
case PEC_NEST_PBCQ_PRED_VEC_TIMEOUT:
pec->nest_regs[reg] = val & PPC_BITMASK(0, 15);
break;
ppc/pnv: Add models for POWER9 PHB4 PCIe Host bridge These changes introduces models for the PCIe Host Bridge (PHB4) of the POWER9 processor. It includes the PowerBus logic interface (PBCQ), IOMMU support, a single PCIe Gen.4 Root Complex, and support for MSI and LSI interrupt sources as found on a POWER9 system using the XIVE interrupt controller. POWER9 processor comes with 3 PHB4 PEC (PCI Express Controller) and each PEC can have several PHBs. By default, * PEC0 provides 1 PHB (PHB0) * PEC1 provides 2 PHBs (PHB1 and PHB2) * PEC2 provides 3 PHBs (PHB3, PHB4 and PHB5) Each PEC has a set "global" registers and some "per-stack" (per-PHB) registers. Those are organized in two XSCOM ranges, the "Nest" range and the "PCI" range, each range contains both some "PEC" registers and some "per-stack" registers. No default device layout is provided and PCI devices can be added on any of the available PCIe Root Port (pcie.0 .. 2 of a Power9 chip) with address 0x0 as the firwware (skiboot) only accepts a single device per root port. To run a simple system with a network and a storage adapters, use a command line options such as : -device e1000e,netdev=net0,mac=C0:FF:EE:00:00:02,bus=pcie.0,addr=0x0 -netdev bridge,id=net0,helper=/usr/libexec/qemu-bridge-helper,br=virbr0,id=hostnet0 -device megasas,id=scsi0,bus=pcie.1,addr=0x0 -drive file=$disk,if=none,id=drive-scsi0-0-0-0,format=qcow2,cache=none -device scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=0,drive=drive-scsi0-0-0-0,id=scsi0-0-0-0,bootindex=2 If more are needed, include a bridge. Multi chip is supported, each chip adding its set of PHB4 controllers and its PCI busses. The model doesn't emulate the EEH error handling. This model is not ready for hotplug yet. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [ clg: - numerous cleanups - commit log - fix for broken LSI support - PHB pic printinfo - large QOM rework ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20200127144506.11132-2-clg@kaod.org> [dwg: Use device_class_set_props()] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-01-27 17:45:05 +03:00
case PEC_NEST_PBCQ_READ_STK_OVR:
pec->nest_regs[reg] = val & PPC_BITMASK(0, 48);
break;
ppc/pnv: Add models for POWER9 PHB4 PCIe Host bridge These changes introduces models for the PCIe Host Bridge (PHB4) of the POWER9 processor. It includes the PowerBus logic interface (PBCQ), IOMMU support, a single PCIe Gen.4 Root Complex, and support for MSI and LSI interrupt sources as found on a POWER9 system using the XIVE interrupt controller. POWER9 processor comes with 3 PHB4 PEC (PCI Express Controller) and each PEC can have several PHBs. By default, * PEC0 provides 1 PHB (PHB0) * PEC1 provides 2 PHBs (PHB1 and PHB2) * PEC2 provides 3 PHBs (PHB3, PHB4 and PHB5) Each PEC has a set "global" registers and some "per-stack" (per-PHB) registers. Those are organized in two XSCOM ranges, the "Nest" range and the "PCI" range, each range contains both some "PEC" registers and some "per-stack" registers. No default device layout is provided and PCI devices can be added on any of the available PCIe Root Port (pcie.0 .. 2 of a Power9 chip) with address 0x0 as the firwware (skiboot) only accepts a single device per root port. To run a simple system with a network and a storage adapters, use a command line options such as : -device e1000e,netdev=net0,mac=C0:FF:EE:00:00:02,bus=pcie.0,addr=0x0 -netdev bridge,id=net0,helper=/usr/libexec/qemu-bridge-helper,br=virbr0,id=hostnet0 -device megasas,id=scsi0,bus=pcie.1,addr=0x0 -drive file=$disk,if=none,id=drive-scsi0-0-0-0,format=qcow2,cache=none -device scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=0,drive=drive-scsi0-0-0-0,id=scsi0-0-0-0,bootindex=2 If more are needed, include a bridge. Multi chip is supported, each chip adding its set of PHB4 controllers and its PCI busses. The model doesn't emulate the EEH error handling. This model is not ready for hotplug yet. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [ clg: - numerous cleanups - commit log - fix for broken LSI support - PHB pic printinfo - large QOM rework ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20200127144506.11132-2-clg@kaod.org> [dwg: Use device_class_set_props()] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-01-27 17:45:05 +03:00
case PEC_NEST_PBCQ_WRITE_STK_OVR:
case PEC_NEST_PBCQ_STORE_STK_OVR:
pec->nest_regs[reg] = val & PPC_BITMASK(0, 24);
break;
ppc/pnv: Add models for POWER9 PHB4 PCIe Host bridge These changes introduces models for the PCIe Host Bridge (PHB4) of the POWER9 processor. It includes the PowerBus logic interface (PBCQ), IOMMU support, a single PCIe Gen.4 Root Complex, and support for MSI and LSI interrupt sources as found on a POWER9 system using the XIVE interrupt controller. POWER9 processor comes with 3 PHB4 PEC (PCI Express Controller) and each PEC can have several PHBs. By default, * PEC0 provides 1 PHB (PHB0) * PEC1 provides 2 PHBs (PHB1 and PHB2) * PEC2 provides 3 PHBs (PHB3, PHB4 and PHB5) Each PEC has a set "global" registers and some "per-stack" (per-PHB) registers. Those are organized in two XSCOM ranges, the "Nest" range and the "PCI" range, each range contains both some "PEC" registers and some "per-stack" registers. No default device layout is provided and PCI devices can be added on any of the available PCIe Root Port (pcie.0 .. 2 of a Power9 chip) with address 0x0 as the firwware (skiboot) only accepts a single device per root port. To run a simple system with a network and a storage adapters, use a command line options such as : -device e1000e,netdev=net0,mac=C0:FF:EE:00:00:02,bus=pcie.0,addr=0x0 -netdev bridge,id=net0,helper=/usr/libexec/qemu-bridge-helper,br=virbr0,id=hostnet0 -device megasas,id=scsi0,bus=pcie.1,addr=0x0 -drive file=$disk,if=none,id=drive-scsi0-0-0-0,format=qcow2,cache=none -device scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=0,drive=drive-scsi0-0-0-0,id=scsi0-0-0-0,bootindex=2 If more are needed, include a bridge. Multi chip is supported, each chip adding its set of PHB4 controllers and its PCI busses. The model doesn't emulate the EEH error handling. This model is not ready for hotplug yet. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [ clg: - numerous cleanups - commit log - fix for broken LSI support - PHB pic printinfo - large QOM rework ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20200127144506.11132-2-clg@kaod.org> [dwg: Use device_class_set_props()] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-01-27 17:45:05 +03:00
case PEC_NEST_PBCQ_RETRY_BKOFF_CTRL:
pec->nest_regs[reg] = val & PPC_BITMASK(0, 41);
break;
case PEC_NEST_PBCQ_HW_CONFIG:
case PEC_NEST_CAPP_CTRL:
ppc/pnv: Add models for POWER9 PHB4 PCIe Host bridge These changes introduces models for the PCIe Host Bridge (PHB4) of the POWER9 processor. It includes the PowerBus logic interface (PBCQ), IOMMU support, a single PCIe Gen.4 Root Complex, and support for MSI and LSI interrupt sources as found on a POWER9 system using the XIVE interrupt controller. POWER9 processor comes with 3 PHB4 PEC (PCI Express Controller) and each PEC can have several PHBs. By default, * PEC0 provides 1 PHB (PHB0) * PEC1 provides 2 PHBs (PHB1 and PHB2) * PEC2 provides 3 PHBs (PHB3, PHB4 and PHB5) Each PEC has a set "global" registers and some "per-stack" (per-PHB) registers. Those are organized in two XSCOM ranges, the "Nest" range and the "PCI" range, each range contains both some "PEC" registers and some "per-stack" registers. No default device layout is provided and PCI devices can be added on any of the available PCIe Root Port (pcie.0 .. 2 of a Power9 chip) with address 0x0 as the firwware (skiboot) only accepts a single device per root port. To run a simple system with a network and a storage adapters, use a command line options such as : -device e1000e,netdev=net0,mac=C0:FF:EE:00:00:02,bus=pcie.0,addr=0x0 -netdev bridge,id=net0,helper=/usr/libexec/qemu-bridge-helper,br=virbr0,id=hostnet0 -device megasas,id=scsi0,bus=pcie.1,addr=0x0 -drive file=$disk,if=none,id=drive-scsi0-0-0-0,format=qcow2,cache=none -device scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=0,drive=drive-scsi0-0-0-0,id=scsi0-0-0-0,bootindex=2 If more are needed, include a bridge. Multi chip is supported, each chip adding its set of PHB4 controllers and its PCI busses. The model doesn't emulate the EEH error handling. This model is not ready for hotplug yet. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [ clg: - numerous cleanups - commit log - fix for broken LSI support - PHB pic printinfo - large QOM rework ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20200127144506.11132-2-clg@kaod.org> [dwg: Use device_class_set_props()] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-01-27 17:45:05 +03:00
pec->nest_regs[reg] = val;
break;
default:
phb_pec_error(pec, "%s @0x%"HWADDR_PRIx"=%"PRIx64"\n", __func__,
addr, val);
}
}
static const MemoryRegionOps pnv_pec_nest_xscom_ops = {
.read = pnv_pec_nest_xscom_read,
.write = pnv_pec_nest_xscom_write,
.valid.min_access_size = 8,
.valid.max_access_size = 8,
.impl.min_access_size = 8,
.impl.max_access_size = 8,
.endianness = DEVICE_BIG_ENDIAN,
};
static uint64_t pnv_pec_pci_xscom_read(void *opaque, hwaddr addr,
unsigned size)
{
PnvPhb4PecState *pec = PNV_PHB4_PEC(opaque);
uint32_t reg = addr >> 3;
/* All registers are readable */
ppc/pnv: Add models for POWER9 PHB4 PCIe Host bridge These changes introduces models for the PCIe Host Bridge (PHB4) of the POWER9 processor. It includes the PowerBus logic interface (PBCQ), IOMMU support, a single PCIe Gen.4 Root Complex, and support for MSI and LSI interrupt sources as found on a POWER9 system using the XIVE interrupt controller. POWER9 processor comes with 3 PHB4 PEC (PCI Express Controller) and each PEC can have several PHBs. By default, * PEC0 provides 1 PHB (PHB0) * PEC1 provides 2 PHBs (PHB1 and PHB2) * PEC2 provides 3 PHBs (PHB3, PHB4 and PHB5) Each PEC has a set "global" registers and some "per-stack" (per-PHB) registers. Those are organized in two XSCOM ranges, the "Nest" range and the "PCI" range, each range contains both some "PEC" registers and some "per-stack" registers. No default device layout is provided and PCI devices can be added on any of the available PCIe Root Port (pcie.0 .. 2 of a Power9 chip) with address 0x0 as the firwware (skiboot) only accepts a single device per root port. To run a simple system with a network and a storage adapters, use a command line options such as : -device e1000e,netdev=net0,mac=C0:FF:EE:00:00:02,bus=pcie.0,addr=0x0 -netdev bridge,id=net0,helper=/usr/libexec/qemu-bridge-helper,br=virbr0,id=hostnet0 -device megasas,id=scsi0,bus=pcie.1,addr=0x0 -drive file=$disk,if=none,id=drive-scsi0-0-0-0,format=qcow2,cache=none -device scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=0,drive=drive-scsi0-0-0-0,id=scsi0-0-0-0,bootindex=2 If more are needed, include a bridge. Multi chip is supported, each chip adding its set of PHB4 controllers and its PCI busses. The model doesn't emulate the EEH error handling. This model is not ready for hotplug yet. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [ clg: - numerous cleanups - commit log - fix for broken LSI support - PHB pic printinfo - large QOM rework ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20200127144506.11132-2-clg@kaod.org> [dwg: Use device_class_set_props()] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-01-27 17:45:05 +03:00
return pec->pci_regs[reg];
}
static void pnv_pec_pci_xscom_write(void *opaque, hwaddr addr,
uint64_t val, unsigned size)
{
PnvPhb4PecState *pec = PNV_PHB4_PEC(opaque);
uint32_t reg = addr >> 3;
switch (reg) {
case PEC_PCI_PBAIB_HW_CONFIG:
pec->pci_regs[reg] = val & PPC_BITMASK(0, 42);
break;
case PEC_PCI_PBAIB_HW_OVR:
pec->pci_regs[reg] = val & PPC_BITMASK(0, 15);
break;
ppc/pnv: Add models for POWER9 PHB4 PCIe Host bridge These changes introduces models for the PCIe Host Bridge (PHB4) of the POWER9 processor. It includes the PowerBus logic interface (PBCQ), IOMMU support, a single PCIe Gen.4 Root Complex, and support for MSI and LSI interrupt sources as found on a POWER9 system using the XIVE interrupt controller. POWER9 processor comes with 3 PHB4 PEC (PCI Express Controller) and each PEC can have several PHBs. By default, * PEC0 provides 1 PHB (PHB0) * PEC1 provides 2 PHBs (PHB1 and PHB2) * PEC2 provides 3 PHBs (PHB3, PHB4 and PHB5) Each PEC has a set "global" registers and some "per-stack" (per-PHB) registers. Those are organized in two XSCOM ranges, the "Nest" range and the "PCI" range, each range contains both some "PEC" registers and some "per-stack" registers. No default device layout is provided and PCI devices can be added on any of the available PCIe Root Port (pcie.0 .. 2 of a Power9 chip) with address 0x0 as the firwware (skiboot) only accepts a single device per root port. To run a simple system with a network and a storage adapters, use a command line options such as : -device e1000e,netdev=net0,mac=C0:FF:EE:00:00:02,bus=pcie.0,addr=0x0 -netdev bridge,id=net0,helper=/usr/libexec/qemu-bridge-helper,br=virbr0,id=hostnet0 -device megasas,id=scsi0,bus=pcie.1,addr=0x0 -drive file=$disk,if=none,id=drive-scsi0-0-0-0,format=qcow2,cache=none -device scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=0,drive=drive-scsi0-0-0-0,id=scsi0-0-0-0,bootindex=2 If more are needed, include a bridge. Multi chip is supported, each chip adding its set of PHB4 controllers and its PCI busses. The model doesn't emulate the EEH error handling. This model is not ready for hotplug yet. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [ clg: - numerous cleanups - commit log - fix for broken LSI support - PHB pic printinfo - large QOM rework ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20200127144506.11132-2-clg@kaod.org> [dwg: Use device_class_set_props()] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-01-27 17:45:05 +03:00
case PEC_PCI_PBAIB_READ_STK_OVR:
pec->pci_regs[reg] = val & PPC_BITMASK(0, 48);
ppc/pnv: Add models for POWER9 PHB4 PCIe Host bridge These changes introduces models for the PCIe Host Bridge (PHB4) of the POWER9 processor. It includes the PowerBus logic interface (PBCQ), IOMMU support, a single PCIe Gen.4 Root Complex, and support for MSI and LSI interrupt sources as found on a POWER9 system using the XIVE interrupt controller. POWER9 processor comes with 3 PHB4 PEC (PCI Express Controller) and each PEC can have several PHBs. By default, * PEC0 provides 1 PHB (PHB0) * PEC1 provides 2 PHBs (PHB1 and PHB2) * PEC2 provides 3 PHBs (PHB3, PHB4 and PHB5) Each PEC has a set "global" registers and some "per-stack" (per-PHB) registers. Those are organized in two XSCOM ranges, the "Nest" range and the "PCI" range, each range contains both some "PEC" registers and some "per-stack" registers. No default device layout is provided and PCI devices can be added on any of the available PCIe Root Port (pcie.0 .. 2 of a Power9 chip) with address 0x0 as the firwware (skiboot) only accepts a single device per root port. To run a simple system with a network and a storage adapters, use a command line options such as : -device e1000e,netdev=net0,mac=C0:FF:EE:00:00:02,bus=pcie.0,addr=0x0 -netdev bridge,id=net0,helper=/usr/libexec/qemu-bridge-helper,br=virbr0,id=hostnet0 -device megasas,id=scsi0,bus=pcie.1,addr=0x0 -drive file=$disk,if=none,id=drive-scsi0-0-0-0,format=qcow2,cache=none -device scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=0,drive=drive-scsi0-0-0-0,id=scsi0-0-0-0,bootindex=2 If more are needed, include a bridge. Multi chip is supported, each chip adding its set of PHB4 controllers and its PCI busses. The model doesn't emulate the EEH error handling. This model is not ready for hotplug yet. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [ clg: - numerous cleanups - commit log - fix for broken LSI support - PHB pic printinfo - large QOM rework ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20200127144506.11132-2-clg@kaod.org> [dwg: Use device_class_set_props()] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-01-27 17:45:05 +03:00
break;
default:
phb_pec_error(pec, "%s @0x%"HWADDR_PRIx"=%"PRIx64"\n", __func__,
addr, val);
}
}
static const MemoryRegionOps pnv_pec_pci_xscom_ops = {
.read = pnv_pec_pci_xscom_read,
.write = pnv_pec_pci_xscom_write,
.valid.min_access_size = 8,
.valid.max_access_size = 8,
.impl.min_access_size = 8,
.impl.max_access_size = 8,
.endianness = DEVICE_BIG_ENDIAN,
};
PnvPhb4PecState *pnv_pec_add_phb(PnvChip *chip, PnvPHB *phb, Error **errp)
{
PnvPhb4PecState *pecs = NULL;
int chip_id = phb->chip_id;
int index = phb->phb_id;
int i, j;
if (phb->version == 4) {
Pnv9Chip *chip9 = PNV9_CHIP(chip);
pecs = chip9->pecs;
} else if (phb->version == 5) {
Pnv10Chip *chip10 = PNV10_CHIP(chip);
pecs = chip10->pecs;
} else {
g_assert_not_reached();
}
for (i = 0; i < chip->num_pecs; i++) {
/*
* For each PEC, check the amount of phbs it supports
* and see if the given phb4 index matches an index.
*/
PnvPhb4PecState *pec = &pecs[i];
for (j = 0; j < pec->num_phbs; j++) {
if (index == pnv_phb4_pec_get_phb_id(pec, j)) {
pec->phbs[j] = phb;
phb->pec = pec;
return pec;
}
}
}
error_setg(errp,
"pnv-phb4 chip-id %d index %d didn't match any existing PEC",
chip_id, index);
return NULL;
}
static PnvPHB *pnv_pec_default_phb_realize(PnvPhb4PecState *pec,
int stack_no,
Error **errp)
{
PnvPHB *phb = PNV_PHB(qdev_new(TYPE_PNV_PHB));
int phb_id = pnv_phb4_pec_get_phb_id(pec, stack_no);
ppc/pnv: Remove user-created PHB{3,4,5} devices On a real system with POWER{8,9,10} processors, PHBs are sub-units of the processor, they can be deactivated by firmware but not plugged in or out like a PCI adapter on a slot. Nevertheless, having user-created PHBs in QEMU seemed to be a good idea for testing purposes : 1. having a limited set of PHBs speedups boot time. 2. it is useful to be able to mimic a partially broken topology you some time have to deal with during bring-up. PowerNV is also used for distro install tests and having libvirt support eases these tasks. libvirt prefers to run the machine with -nodefaults to be sure not to drag unexpected devices which would need to be defined in the domain file without being specified on the QEMU command line. For this reason : 3. -nodefaults should not include default PHBs User-created PHB{3,4,5} devices satisfied all these needs but reality proves to be a bit more complex, internally when modeling such devices, and externally when dealing with the user interface. Req 1. and 2. can be simply addressed differently with a machine option: "phb-mask=<uint>", which QEMU would use to enable/disable PHB device nodes when creating the device tree. For Req 3., we need to make sure we are taking the right approach. It seems that we should expose a new type of user-created PHB device, a generic virtualized one, that libvirt would use and not one depending on the processor revision. This needs more thinking. For now, remove user-created PHB{3,4,5} devices. All the cleanups we did are not lost and they will be useful for the next steps. Fixes: 5bc67b052b51 ("ppc/pnv: Introduce user creatable pnv-phb4 devices") Fixes: 1f6a88fffc75 ("ppc/pnv: Introduce support for user created PHB3 devices") Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com> Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20220314130514.529931-1-clg@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-03-14 17:57:17 +03:00
object_property_add_child(OBJECT(pec), "phb[*]", OBJECT(phb));
ppc/pnv: make PECs create and realize PHB4s This patch changes the design of the PEC device to create and realize PHB4s instead of PecStacks. After all the recent changes, PHB4s now contain all the information needed for their proper functioning, not relying on PecStack in any capacity. All changes are being made in a single patch to avoid renaming parts of the PecState and leaving the code in a strange way. E.g. rename PecClass->num_stacks to num_phbs, which would then read a pnv_pec_num_stacks[] array. To avoid mixing the old and new design more than necessary it's clearer to do these changes in a single step. The name changes made are: - in PnvPhb4PecState: * rename 'num_stacks' to 'num_phbs' * remove the pec->stacks[] array. Current code relies on the pec->stacks[] obj acting as a simple container, without ever accessing pec->stacks[] for any other purpose. Instead of converting this into a pec->phbs[] array, remove it - in PnvPhb4PecClass, rename *num_stacks to *num_phbs; - pnv_pec_num_stacks[] is renamed to pnv_pec_num_phbs[]. The logical changes: - pnv_pec_default_phb_realize(): * init and set the properties of the PnvPHB4 qdev * do not use stack->phb anymore; - pnv_pec_realize(): * use the new default_phb_realize() to init/realize each PHB if running with defaults; - pnv_pec_instance_init(): removed since we're creating the PHBs during pec_realize(); - pnv_phb4_get_stack(): * renamed to pnv_phb4_get_pec() and returns a PnvPhb4PecState*; - pnv_phb4_realize(): use 'phb->pec' instead of 'stack'. This design change shouldn't caused any behavioral change in the runtime of the machine. Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20220114180719.52117-7-danielhb413@gmail.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-01-18 14:56:31 +03:00
object_property_set_link(OBJECT(phb), "pec", OBJECT(pec),
&error_abort);
ppc/pnv: make PECs create and realize PHB4s This patch changes the design of the PEC device to create and realize PHB4s instead of PecStacks. After all the recent changes, PHB4s now contain all the information needed for their proper functioning, not relying on PecStack in any capacity. All changes are being made in a single patch to avoid renaming parts of the PecState and leaving the code in a strange way. E.g. rename PecClass->num_stacks to num_phbs, which would then read a pnv_pec_num_stacks[] array. To avoid mixing the old and new design more than necessary it's clearer to do these changes in a single step. The name changes made are: - in PnvPhb4PecState: * rename 'num_stacks' to 'num_phbs' * remove the pec->stacks[] array. Current code relies on the pec->stacks[] obj acting as a simple container, without ever accessing pec->stacks[] for any other purpose. Instead of converting this into a pec->phbs[] array, remove it - in PnvPhb4PecClass, rename *num_stacks to *num_phbs; - pnv_pec_num_stacks[] is renamed to pnv_pec_num_phbs[]. The logical changes: - pnv_pec_default_phb_realize(): * init and set the properties of the PnvPHB4 qdev * do not use stack->phb anymore; - pnv_pec_realize(): * use the new default_phb_realize() to init/realize each PHB if running with defaults; - pnv_pec_instance_init(): removed since we're creating the PHBs during pec_realize(); - pnv_phb4_get_stack(): * renamed to pnv_phb4_get_pec() and returns a PnvPhb4PecState*; - pnv_phb4_realize(): use 'phb->pec' instead of 'stack'. This design change shouldn't caused any behavioral change in the runtime of the machine. Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20220114180719.52117-7-danielhb413@gmail.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-01-18 14:56:31 +03:00
object_property_set_int(OBJECT(phb), "chip-id", pec->chip_id,
&error_fatal);
ppc/pnv: make PECs create and realize PHB4s This patch changes the design of the PEC device to create and realize PHB4s instead of PecStacks. After all the recent changes, PHB4s now contain all the information needed for their proper functioning, not relying on PecStack in any capacity. All changes are being made in a single patch to avoid renaming parts of the PecState and leaving the code in a strange way. E.g. rename PecClass->num_stacks to num_phbs, which would then read a pnv_pec_num_stacks[] array. To avoid mixing the old and new design more than necessary it's clearer to do these changes in a single step. The name changes made are: - in PnvPhb4PecState: * rename 'num_stacks' to 'num_phbs' * remove the pec->stacks[] array. Current code relies on the pec->stacks[] obj acting as a simple container, without ever accessing pec->stacks[] for any other purpose. Instead of converting this into a pec->phbs[] array, remove it - in PnvPhb4PecClass, rename *num_stacks to *num_phbs; - pnv_pec_num_stacks[] is renamed to pnv_pec_num_phbs[]. The logical changes: - pnv_pec_default_phb_realize(): * init and set the properties of the PnvPHB4 qdev * do not use stack->phb anymore; - pnv_pec_realize(): * use the new default_phb_realize() to init/realize each PHB if running with defaults; - pnv_pec_instance_init(): removed since we're creating the PHBs during pec_realize(); - pnv_phb4_get_stack(): * renamed to pnv_phb4_get_pec() and returns a PnvPhb4PecState*; - pnv_phb4_realize(): use 'phb->pec' instead of 'stack'. This design change shouldn't caused any behavioral change in the runtime of the machine. Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20220114180719.52117-7-danielhb413@gmail.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-01-18 14:56:31 +03:00
object_property_set_int(OBJECT(phb), "index", phb_id,
&error_fatal);
ppc/pnv: make PECs create and realize PHB4s This patch changes the design of the PEC device to create and realize PHB4s instead of PecStacks. After all the recent changes, PHB4s now contain all the information needed for their proper functioning, not relying on PecStack in any capacity. All changes are being made in a single patch to avoid renaming parts of the PecState and leaving the code in a strange way. E.g. rename PecClass->num_stacks to num_phbs, which would then read a pnv_pec_num_stacks[] array. To avoid mixing the old and new design more than necessary it's clearer to do these changes in a single step. The name changes made are: - in PnvPhb4PecState: * rename 'num_stacks' to 'num_phbs' * remove the pec->stacks[] array. Current code relies on the pec->stacks[] obj acting as a simple container, without ever accessing pec->stacks[] for any other purpose. Instead of converting this into a pec->phbs[] array, remove it - in PnvPhb4PecClass, rename *num_stacks to *num_phbs; - pnv_pec_num_stacks[] is renamed to pnv_pec_num_phbs[]. The logical changes: - pnv_pec_default_phb_realize(): * init and set the properties of the PnvPHB4 qdev * do not use stack->phb anymore; - pnv_pec_realize(): * use the new default_phb_realize() to init/realize each PHB if running with defaults; - pnv_pec_instance_init(): removed since we're creating the PHBs during pec_realize(); - pnv_phb4_get_stack(): * renamed to pnv_phb4_get_pec() and returns a PnvPhb4PecState*; - pnv_phb4_realize(): use 'phb->pec' instead of 'stack'. This design change shouldn't caused any behavioral change in the runtime of the machine. Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20220114180719.52117-7-danielhb413@gmail.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-01-18 14:56:31 +03:00
if (!sysbus_realize(SYS_BUS_DEVICE(phb), errp)) {
return NULL;
}
return phb;
}
ppc/pnv: Add models for POWER9 PHB4 PCIe Host bridge These changes introduces models for the PCIe Host Bridge (PHB4) of the POWER9 processor. It includes the PowerBus logic interface (PBCQ), IOMMU support, a single PCIe Gen.4 Root Complex, and support for MSI and LSI interrupt sources as found on a POWER9 system using the XIVE interrupt controller. POWER9 processor comes with 3 PHB4 PEC (PCI Express Controller) and each PEC can have several PHBs. By default, * PEC0 provides 1 PHB (PHB0) * PEC1 provides 2 PHBs (PHB1 and PHB2) * PEC2 provides 3 PHBs (PHB3, PHB4 and PHB5) Each PEC has a set "global" registers and some "per-stack" (per-PHB) registers. Those are organized in two XSCOM ranges, the "Nest" range and the "PCI" range, each range contains both some "PEC" registers and some "per-stack" registers. No default device layout is provided and PCI devices can be added on any of the available PCIe Root Port (pcie.0 .. 2 of a Power9 chip) with address 0x0 as the firwware (skiboot) only accepts a single device per root port. To run a simple system with a network and a storage adapters, use a command line options such as : -device e1000e,netdev=net0,mac=C0:FF:EE:00:00:02,bus=pcie.0,addr=0x0 -netdev bridge,id=net0,helper=/usr/libexec/qemu-bridge-helper,br=virbr0,id=hostnet0 -device megasas,id=scsi0,bus=pcie.1,addr=0x0 -drive file=$disk,if=none,id=drive-scsi0-0-0-0,format=qcow2,cache=none -device scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=0,drive=drive-scsi0-0-0-0,id=scsi0-0-0-0,bootindex=2 If more are needed, include a bridge. Multi chip is supported, each chip adding its set of PHB4 controllers and its PCI busses. The model doesn't emulate the EEH error handling. This model is not ready for hotplug yet. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [ clg: - numerous cleanups - commit log - fix for broken LSI support - PHB pic printinfo - large QOM rework ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20200127144506.11132-2-clg@kaod.org> [dwg: Use device_class_set_props()] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-01-27 17:45:05 +03:00
static void pnv_pec_realize(DeviceState *dev, Error **errp)
{
PnvPhb4PecState *pec = PNV_PHB4_PEC(dev);
PnvPhb4PecClass *pecc = PNV_PHB4_PEC_GET_CLASS(pec);
ppc/pnv: Add models for POWER9 PHB4 PCIe Host bridge These changes introduces models for the PCIe Host Bridge (PHB4) of the POWER9 processor. It includes the PowerBus logic interface (PBCQ), IOMMU support, a single PCIe Gen.4 Root Complex, and support for MSI and LSI interrupt sources as found on a POWER9 system using the XIVE interrupt controller. POWER9 processor comes with 3 PHB4 PEC (PCI Express Controller) and each PEC can have several PHBs. By default, * PEC0 provides 1 PHB (PHB0) * PEC1 provides 2 PHBs (PHB1 and PHB2) * PEC2 provides 3 PHBs (PHB3, PHB4 and PHB5) Each PEC has a set "global" registers and some "per-stack" (per-PHB) registers. Those are organized in two XSCOM ranges, the "Nest" range and the "PCI" range, each range contains both some "PEC" registers and some "per-stack" registers. No default device layout is provided and PCI devices can be added on any of the available PCIe Root Port (pcie.0 .. 2 of a Power9 chip) with address 0x0 as the firwware (skiboot) only accepts a single device per root port. To run a simple system with a network and a storage adapters, use a command line options such as : -device e1000e,netdev=net0,mac=C0:FF:EE:00:00:02,bus=pcie.0,addr=0x0 -netdev bridge,id=net0,helper=/usr/libexec/qemu-bridge-helper,br=virbr0,id=hostnet0 -device megasas,id=scsi0,bus=pcie.1,addr=0x0 -drive file=$disk,if=none,id=drive-scsi0-0-0-0,format=qcow2,cache=none -device scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=0,drive=drive-scsi0-0-0-0,id=scsi0-0-0-0,bootindex=2 If more are needed, include a bridge. Multi chip is supported, each chip adding its set of PHB4 controllers and its PCI busses. The model doesn't emulate the EEH error handling. This model is not ready for hotplug yet. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [ clg: - numerous cleanups - commit log - fix for broken LSI support - PHB pic printinfo - large QOM rework ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20200127144506.11132-2-clg@kaod.org> [dwg: Use device_class_set_props()] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-01-27 17:45:05 +03:00
char name[64];
int i;
if (pec->index >= PNV_CHIP_GET_CLASS(pec->chip)->num_pecs) {
error_setg(errp, "invalid PEC index: %d", pec->index);
return;
}
ppc/pnv: make PECs create and realize PHB4s This patch changes the design of the PEC device to create and realize PHB4s instead of PecStacks. After all the recent changes, PHB4s now contain all the information needed for their proper functioning, not relying on PecStack in any capacity. All changes are being made in a single patch to avoid renaming parts of the PecState and leaving the code in a strange way. E.g. rename PecClass->num_stacks to num_phbs, which would then read a pnv_pec_num_stacks[] array. To avoid mixing the old and new design more than necessary it's clearer to do these changes in a single step. The name changes made are: - in PnvPhb4PecState: * rename 'num_stacks' to 'num_phbs' * remove the pec->stacks[] array. Current code relies on the pec->stacks[] obj acting as a simple container, without ever accessing pec->stacks[] for any other purpose. Instead of converting this into a pec->phbs[] array, remove it - in PnvPhb4PecClass, rename *num_stacks to *num_phbs; - pnv_pec_num_stacks[] is renamed to pnv_pec_num_phbs[]. The logical changes: - pnv_pec_default_phb_realize(): * init and set the properties of the PnvPHB4 qdev * do not use stack->phb anymore; - pnv_pec_realize(): * use the new default_phb_realize() to init/realize each PHB if running with defaults; - pnv_pec_instance_init(): removed since we're creating the PHBs during pec_realize(); - pnv_phb4_get_stack(): * renamed to pnv_phb4_get_pec() and returns a PnvPhb4PecState*; - pnv_phb4_realize(): use 'phb->pec' instead of 'stack'. This design change shouldn't caused any behavioral change in the runtime of the machine. Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20220114180719.52117-7-danielhb413@gmail.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-01-18 14:56:31 +03:00
pec->num_phbs = pecc->num_phbs[pec->index];
ppc/pnv: make PECs create and realize PHB4s This patch changes the design of the PEC device to create and realize PHB4s instead of PecStacks. After all the recent changes, PHB4s now contain all the information needed for their proper functioning, not relying on PecStack in any capacity. All changes are being made in a single patch to avoid renaming parts of the PecState and leaving the code in a strange way. E.g. rename PecClass->num_stacks to num_phbs, which would then read a pnv_pec_num_stacks[] array. To avoid mixing the old and new design more than necessary it's clearer to do these changes in a single step. The name changes made are: - in PnvPhb4PecState: * rename 'num_stacks' to 'num_phbs' * remove the pec->stacks[] array. Current code relies on the pec->stacks[] obj acting as a simple container, without ever accessing pec->stacks[] for any other purpose. Instead of converting this into a pec->phbs[] array, remove it - in PnvPhb4PecClass, rename *num_stacks to *num_phbs; - pnv_pec_num_stacks[] is renamed to pnv_pec_num_phbs[]. The logical changes: - pnv_pec_default_phb_realize(): * init and set the properties of the PnvPHB4 qdev * do not use stack->phb anymore; - pnv_pec_realize(): * use the new default_phb_realize() to init/realize each PHB if running with defaults; - pnv_pec_instance_init(): removed since we're creating the PHBs during pec_realize(); - pnv_phb4_get_stack(): * renamed to pnv_phb4_get_pec() and returns a PnvPhb4PecState*; - pnv_phb4_realize(): use 'phb->pec' instead of 'stack'. This design change shouldn't caused any behavioral change in the runtime of the machine. Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20220114180719.52117-7-danielhb413@gmail.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-01-18 14:56:31 +03:00
/* Create PHBs if running with defaults */
if (defaults_enabled()) {
g_assert(pec->num_phbs <= MAX_PHBS_PER_PEC);
for (i = 0; i < pec->num_phbs; i++) {
pec->phbs[i] = pnv_pec_default_phb_realize(pec, i, errp);
}
pnv/phb4: Delete unused "pnv-phb4-pec-stack" devices The number of stacks is controlled by property "num-stacks". pnv_pec_instance_init() creates the maximum supported number, because the property has not been set then. pnv_pec_realize() realizes only the wanted number. Works, although it can leave unrealized devices hanging around in the QOM composition tree. Affects machine powernv9. Delete the unused devices by making pnv_pec_realize() unparent them. Visible in "info qom-tree": /machine (powernv9-machine) /chip[0] (power9_v2.0-pnv-chip) [...] /pec[0] (pnv-phb4-pec) /stack[0] (pnv-phb4-pec-stack) [...] - /stack[1] (pnv-phb4-pec-stack) - /phb (pnv-phb4) - /pcie-mmcfg-mmio[0] (qemu:memory-region) - /root (pnv-phb4-root-port) - /source (xive-source) - /stack[2] (pnv-phb4-pec-stack) - /phb (pnv-phb4) - /pcie-mmcfg-mmio[0] (qemu:memory-region) - /root (pnv-phb4-root-port) - /source (xive-source) /xscom-pec-0.0-nest[0] (qemu:memory-region) /xscom-pec-0.0-pci[0] (qemu:memory-region) /pec[1] (pnv-phb4-pec) /stack[0] (pnv-phb4-pec-stack) [...] /stack[1] (pnv-phb4-pec-stack) [...] - /stack[2] (pnv-phb4-pec-stack) - /phb (pnv-phb4) - /pcie-mmcfg-mmio[0] (qemu:memory-region) - /root (pnv-phb4-root-port) - /source (xive-source) /xscom-pec-0.1-nest[0] (qemu:memory-region) /xscom-pec-0.1-pci[0] (qemu:memory-region) /pec[2] (pnv-phb4-pec) /stack[0] (pnv-phb4-pec-stack) [...] /stack[1] (pnv-phb4-pec-stack) [...] /stack[2] (pnv-phb4-pec-stack) [...] Cc: Cédric Le Goater <clg@kaod.org> Cc: David Gibson <david@gibson.dropbear.id.au> Cc: qemu-ppc@nongnu.org Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Greg Kurz <groug@kaod.org> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20200609122339.937862-12-armbru@redhat.com>
2020-06-09 15:23:26 +03:00
}
ppc/pnv: Add models for POWER9 PHB4 PCIe Host bridge These changes introduces models for the PCIe Host Bridge (PHB4) of the POWER9 processor. It includes the PowerBus logic interface (PBCQ), IOMMU support, a single PCIe Gen.4 Root Complex, and support for MSI and LSI interrupt sources as found on a POWER9 system using the XIVE interrupt controller. POWER9 processor comes with 3 PHB4 PEC (PCI Express Controller) and each PEC can have several PHBs. By default, * PEC0 provides 1 PHB (PHB0) * PEC1 provides 2 PHBs (PHB1 and PHB2) * PEC2 provides 3 PHBs (PHB3, PHB4 and PHB5) Each PEC has a set "global" registers and some "per-stack" (per-PHB) registers. Those are organized in two XSCOM ranges, the "Nest" range and the "PCI" range, each range contains both some "PEC" registers and some "per-stack" registers. No default device layout is provided and PCI devices can be added on any of the available PCIe Root Port (pcie.0 .. 2 of a Power9 chip) with address 0x0 as the firwware (skiboot) only accepts a single device per root port. To run a simple system with a network and a storage adapters, use a command line options such as : -device e1000e,netdev=net0,mac=C0:FF:EE:00:00:02,bus=pcie.0,addr=0x0 -netdev bridge,id=net0,helper=/usr/libexec/qemu-bridge-helper,br=virbr0,id=hostnet0 -device megasas,id=scsi0,bus=pcie.1,addr=0x0 -drive file=$disk,if=none,id=drive-scsi0-0-0-0,format=qcow2,cache=none -device scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=0,drive=drive-scsi0-0-0-0,id=scsi0-0-0-0,bootindex=2 If more are needed, include a bridge. Multi chip is supported, each chip adding its set of PHB4 controllers and its PCI busses. The model doesn't emulate the EEH error handling. This model is not ready for hotplug yet. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [ clg: - numerous cleanups - commit log - fix for broken LSI support - PHB pic printinfo - large QOM rework ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20200127144506.11132-2-clg@kaod.org> [dwg: Use device_class_set_props()] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-01-27 17:45:05 +03:00
/* Initialize the XSCOM regions for the PEC registers */
snprintf(name, sizeof(name), "xscom-pec-%d.%d-nest", pec->chip_id,
pec->index);
pnv_xscom_region_init(&pec->nest_regs_mr, OBJECT(dev),
&pnv_pec_nest_xscom_ops, pec, name,
PHB4_PEC_NEST_REGS_COUNT);
snprintf(name, sizeof(name), "xscom-pec-%d.%d-pci", pec->chip_id,
pec->index);
pnv_xscom_region_init(&pec->pci_regs_mr, OBJECT(dev),
&pnv_pec_pci_xscom_ops, pec, name,
PHB4_PEC_PCI_REGS_COUNT);
}
static int pnv_pec_dt_xscom(PnvXScomInterface *dev, void *fdt,
int xscom_offset)
{
PnvPhb4PecState *pec = PNV_PHB4_PEC(dev);
PnvPhb4PecClass *pecc = PNV_PHB4_PEC_GET_CLASS(dev);
uint32_t nbase = pecc->xscom_nest_base(pec);
uint32_t pbase = pecc->xscom_pci_base(pec);
int offset, i;
char *name;
uint32_t reg[] = {
cpu_to_be32(nbase),
cpu_to_be32(pecc->xscom_nest_size),
cpu_to_be32(pbase),
cpu_to_be32(pecc->xscom_pci_size),
};
name = g_strdup_printf("pbcq@%x", nbase);
offset = fdt_add_subnode(fdt, xscom_offset, name);
_FDT(offset);
g_free(name);
_FDT((fdt_setprop(fdt, offset, "reg", reg, sizeof(reg))));
_FDT((fdt_setprop_cell(fdt, offset, "ibm,pec-index", pec->index)));
_FDT((fdt_setprop_cell(fdt, offset, "#address-cells", 1)));
_FDT((fdt_setprop_cell(fdt, offset, "#size-cells", 0)));
_FDT((fdt_setprop(fdt, offset, "compatible", pecc->compat,
pecc->compat_size)));
ppc/pnv: make PECs create and realize PHB4s This patch changes the design of the PEC device to create and realize PHB4s instead of PecStacks. After all the recent changes, PHB4s now contain all the information needed for their proper functioning, not relying on PecStack in any capacity. All changes are being made in a single patch to avoid renaming parts of the PecState and leaving the code in a strange way. E.g. rename PecClass->num_stacks to num_phbs, which would then read a pnv_pec_num_stacks[] array. To avoid mixing the old and new design more than necessary it's clearer to do these changes in a single step. The name changes made are: - in PnvPhb4PecState: * rename 'num_stacks' to 'num_phbs' * remove the pec->stacks[] array. Current code relies on the pec->stacks[] obj acting as a simple container, without ever accessing pec->stacks[] for any other purpose. Instead of converting this into a pec->phbs[] array, remove it - in PnvPhb4PecClass, rename *num_stacks to *num_phbs; - pnv_pec_num_stacks[] is renamed to pnv_pec_num_phbs[]. The logical changes: - pnv_pec_default_phb_realize(): * init and set the properties of the PnvPHB4 qdev * do not use stack->phb anymore; - pnv_pec_realize(): * use the new default_phb_realize() to init/realize each PHB if running with defaults; - pnv_pec_instance_init(): removed since we're creating the PHBs during pec_realize(); - pnv_phb4_get_stack(): * renamed to pnv_phb4_get_pec() and returns a PnvPhb4PecState*; - pnv_phb4_realize(): use 'phb->pec' instead of 'stack'. This design change shouldn't caused any behavioral change in the runtime of the machine. Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20220114180719.52117-7-danielhb413@gmail.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-01-18 14:56:31 +03:00
for (i = 0; i < pec->num_phbs; i++) {
ppc/pnv: Add models for POWER9 PHB4 PCIe Host bridge These changes introduces models for the PCIe Host Bridge (PHB4) of the POWER9 processor. It includes the PowerBus logic interface (PBCQ), IOMMU support, a single PCIe Gen.4 Root Complex, and support for MSI and LSI interrupt sources as found on a POWER9 system using the XIVE interrupt controller. POWER9 processor comes with 3 PHB4 PEC (PCI Express Controller) and each PEC can have several PHBs. By default, * PEC0 provides 1 PHB (PHB0) * PEC1 provides 2 PHBs (PHB1 and PHB2) * PEC2 provides 3 PHBs (PHB3, PHB4 and PHB5) Each PEC has a set "global" registers and some "per-stack" (per-PHB) registers. Those are organized in two XSCOM ranges, the "Nest" range and the "PCI" range, each range contains both some "PEC" registers and some "per-stack" registers. No default device layout is provided and PCI devices can be added on any of the available PCIe Root Port (pcie.0 .. 2 of a Power9 chip) with address 0x0 as the firwware (skiboot) only accepts a single device per root port. To run a simple system with a network and a storage adapters, use a command line options such as : -device e1000e,netdev=net0,mac=C0:FF:EE:00:00:02,bus=pcie.0,addr=0x0 -netdev bridge,id=net0,helper=/usr/libexec/qemu-bridge-helper,br=virbr0,id=hostnet0 -device megasas,id=scsi0,bus=pcie.1,addr=0x0 -drive file=$disk,if=none,id=drive-scsi0-0-0-0,format=qcow2,cache=none -device scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=0,drive=drive-scsi0-0-0-0,id=scsi0-0-0-0,bootindex=2 If more are needed, include a bridge. Multi chip is supported, each chip adding its set of PHB4 controllers and its PCI busses. The model doesn't emulate the EEH error handling. This model is not ready for hotplug yet. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [ clg: - numerous cleanups - commit log - fix for broken LSI support - PHB pic printinfo - large QOM rework ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20200127144506.11132-2-clg@kaod.org> [dwg: Use device_class_set_props()] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-01-27 17:45:05 +03:00
int stk_offset;
if (!pec->phbs[i]) {
continue;
}
ppc/pnv: Add models for POWER9 PHB4 PCIe Host bridge These changes introduces models for the PCIe Host Bridge (PHB4) of the POWER9 processor. It includes the PowerBus logic interface (PBCQ), IOMMU support, a single PCIe Gen.4 Root Complex, and support for MSI and LSI interrupt sources as found on a POWER9 system using the XIVE interrupt controller. POWER9 processor comes with 3 PHB4 PEC (PCI Express Controller) and each PEC can have several PHBs. By default, * PEC0 provides 1 PHB (PHB0) * PEC1 provides 2 PHBs (PHB1 and PHB2) * PEC2 provides 3 PHBs (PHB3, PHB4 and PHB5) Each PEC has a set "global" registers and some "per-stack" (per-PHB) registers. Those are organized in two XSCOM ranges, the "Nest" range and the "PCI" range, each range contains both some "PEC" registers and some "per-stack" registers. No default device layout is provided and PCI devices can be added on any of the available PCIe Root Port (pcie.0 .. 2 of a Power9 chip) with address 0x0 as the firwware (skiboot) only accepts a single device per root port. To run a simple system with a network and a storage adapters, use a command line options such as : -device e1000e,netdev=net0,mac=C0:FF:EE:00:00:02,bus=pcie.0,addr=0x0 -netdev bridge,id=net0,helper=/usr/libexec/qemu-bridge-helper,br=virbr0,id=hostnet0 -device megasas,id=scsi0,bus=pcie.1,addr=0x0 -drive file=$disk,if=none,id=drive-scsi0-0-0-0,format=qcow2,cache=none -device scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=0,drive=drive-scsi0-0-0-0,id=scsi0-0-0-0,bootindex=2 If more are needed, include a bridge. Multi chip is supported, each chip adding its set of PHB4 controllers and its PCI busses. The model doesn't emulate the EEH error handling. This model is not ready for hotplug yet. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [ clg: - numerous cleanups - commit log - fix for broken LSI support - PHB pic printinfo - large QOM rework ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20200127144506.11132-2-clg@kaod.org> [dwg: Use device_class_set_props()] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-01-27 17:45:05 +03:00
name = g_strdup_printf("stack@%x", i);
stk_offset = fdt_add_subnode(fdt, offset, name);
_FDT(stk_offset);
g_free(name);
_FDT((fdt_setprop(fdt, stk_offset, "compatible", pecc->stk_compat,
pecc->stk_compat_size)));
_FDT((fdt_setprop_cell(fdt, stk_offset, "reg", i)));
_FDT((fdt_setprop_cell(fdt, stk_offset, "ibm,phb-index",
pec->phbs[i]->phb_id)));
ppc/pnv: Add models for POWER9 PHB4 PCIe Host bridge These changes introduces models for the PCIe Host Bridge (PHB4) of the POWER9 processor. It includes the PowerBus logic interface (PBCQ), IOMMU support, a single PCIe Gen.4 Root Complex, and support for MSI and LSI interrupt sources as found on a POWER9 system using the XIVE interrupt controller. POWER9 processor comes with 3 PHB4 PEC (PCI Express Controller) and each PEC can have several PHBs. By default, * PEC0 provides 1 PHB (PHB0) * PEC1 provides 2 PHBs (PHB1 and PHB2) * PEC2 provides 3 PHBs (PHB3, PHB4 and PHB5) Each PEC has a set "global" registers and some "per-stack" (per-PHB) registers. Those are organized in two XSCOM ranges, the "Nest" range and the "PCI" range, each range contains both some "PEC" registers and some "per-stack" registers. No default device layout is provided and PCI devices can be added on any of the available PCIe Root Port (pcie.0 .. 2 of a Power9 chip) with address 0x0 as the firwware (skiboot) only accepts a single device per root port. To run a simple system with a network and a storage adapters, use a command line options such as : -device e1000e,netdev=net0,mac=C0:FF:EE:00:00:02,bus=pcie.0,addr=0x0 -netdev bridge,id=net0,helper=/usr/libexec/qemu-bridge-helper,br=virbr0,id=hostnet0 -device megasas,id=scsi0,bus=pcie.1,addr=0x0 -drive file=$disk,if=none,id=drive-scsi0-0-0-0,format=qcow2,cache=none -device scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=0,drive=drive-scsi0-0-0-0,id=scsi0-0-0-0,bootindex=2 If more are needed, include a bridge. Multi chip is supported, each chip adding its set of PHB4 controllers and its PCI busses. The model doesn't emulate the EEH error handling. This model is not ready for hotplug yet. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [ clg: - numerous cleanups - commit log - fix for broken LSI support - PHB pic printinfo - large QOM rework ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20200127144506.11132-2-clg@kaod.org> [dwg: Use device_class_set_props()] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-01-27 17:45:05 +03:00
}
return 0;
}
static Property pnv_pec_properties[] = {
DEFINE_PROP_UINT32("index", PnvPhb4PecState, index, 0),
DEFINE_PROP_UINT32("chip-id", PnvPhb4PecState, chip_id, 0),
DEFINE_PROP_LINK("chip", PnvPhb4PecState, chip, TYPE_PNV_CHIP,
PnvChip *),
DEFINE_PROP_END_OF_LIST(),
ppc/pnv: Add models for POWER9 PHB4 PCIe Host bridge These changes introduces models for the PCIe Host Bridge (PHB4) of the POWER9 processor. It includes the PowerBus logic interface (PBCQ), IOMMU support, a single PCIe Gen.4 Root Complex, and support for MSI and LSI interrupt sources as found on a POWER9 system using the XIVE interrupt controller. POWER9 processor comes with 3 PHB4 PEC (PCI Express Controller) and each PEC can have several PHBs. By default, * PEC0 provides 1 PHB (PHB0) * PEC1 provides 2 PHBs (PHB1 and PHB2) * PEC2 provides 3 PHBs (PHB3, PHB4 and PHB5) Each PEC has a set "global" registers and some "per-stack" (per-PHB) registers. Those are organized in two XSCOM ranges, the "Nest" range and the "PCI" range, each range contains both some "PEC" registers and some "per-stack" registers. No default device layout is provided and PCI devices can be added on any of the available PCIe Root Port (pcie.0 .. 2 of a Power9 chip) with address 0x0 as the firwware (skiboot) only accepts a single device per root port. To run a simple system with a network and a storage adapters, use a command line options such as : -device e1000e,netdev=net0,mac=C0:FF:EE:00:00:02,bus=pcie.0,addr=0x0 -netdev bridge,id=net0,helper=/usr/libexec/qemu-bridge-helper,br=virbr0,id=hostnet0 -device megasas,id=scsi0,bus=pcie.1,addr=0x0 -drive file=$disk,if=none,id=drive-scsi0-0-0-0,format=qcow2,cache=none -device scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=0,drive=drive-scsi0-0-0-0,id=scsi0-0-0-0,bootindex=2 If more are needed, include a bridge. Multi chip is supported, each chip adding its set of PHB4 controllers and its PCI busses. The model doesn't emulate the EEH error handling. This model is not ready for hotplug yet. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [ clg: - numerous cleanups - commit log - fix for broken LSI support - PHB pic printinfo - large QOM rework ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20200127144506.11132-2-clg@kaod.org> [dwg: Use device_class_set_props()] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-01-27 17:45:05 +03:00
};
static uint32_t pnv_pec_xscom_pci_base(PnvPhb4PecState *pec)
{
return PNV9_XSCOM_PEC_PCI_BASE + 0x1000000 * pec->index;
}
static uint32_t pnv_pec_xscom_nest_base(PnvPhb4PecState *pec)
{
return PNV9_XSCOM_PEC_NEST_BASE + 0x400 * pec->index;
}
/*
ppc/pnv: make PECs create and realize PHB4s This patch changes the design of the PEC device to create and realize PHB4s instead of PecStacks. After all the recent changes, PHB4s now contain all the information needed for their proper functioning, not relying on PecStack in any capacity. All changes are being made in a single patch to avoid renaming parts of the PecState and leaving the code in a strange way. E.g. rename PecClass->num_stacks to num_phbs, which would then read a pnv_pec_num_stacks[] array. To avoid mixing the old and new design more than necessary it's clearer to do these changes in a single step. The name changes made are: - in PnvPhb4PecState: * rename 'num_stacks' to 'num_phbs' * remove the pec->stacks[] array. Current code relies on the pec->stacks[] obj acting as a simple container, without ever accessing pec->stacks[] for any other purpose. Instead of converting this into a pec->phbs[] array, remove it - in PnvPhb4PecClass, rename *num_stacks to *num_phbs; - pnv_pec_num_stacks[] is renamed to pnv_pec_num_phbs[]. The logical changes: - pnv_pec_default_phb_realize(): * init and set the properties of the PnvPHB4 qdev * do not use stack->phb anymore; - pnv_pec_realize(): * use the new default_phb_realize() to init/realize each PHB if running with defaults; - pnv_pec_instance_init(): removed since we're creating the PHBs during pec_realize(); - pnv_phb4_get_stack(): * renamed to pnv_phb4_get_pec() and returns a PnvPhb4PecState*; - pnv_phb4_realize(): use 'phb->pec' instead of 'stack'. This design change shouldn't caused any behavioral change in the runtime of the machine. Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20220114180719.52117-7-danielhb413@gmail.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-01-18 14:56:31 +03:00
* PEC0 -> 1 phb
* PEC1 -> 2 phb
* PEC2 -> 3 phbs
*/
ppc/pnv: make PECs create and realize PHB4s This patch changes the design of the PEC device to create and realize PHB4s instead of PecStacks. After all the recent changes, PHB4s now contain all the information needed for their proper functioning, not relying on PecStack in any capacity. All changes are being made in a single patch to avoid renaming parts of the PecState and leaving the code in a strange way. E.g. rename PecClass->num_stacks to num_phbs, which would then read a pnv_pec_num_stacks[] array. To avoid mixing the old and new design more than necessary it's clearer to do these changes in a single step. The name changes made are: - in PnvPhb4PecState: * rename 'num_stacks' to 'num_phbs' * remove the pec->stacks[] array. Current code relies on the pec->stacks[] obj acting as a simple container, without ever accessing pec->stacks[] for any other purpose. Instead of converting this into a pec->phbs[] array, remove it - in PnvPhb4PecClass, rename *num_stacks to *num_phbs; - pnv_pec_num_stacks[] is renamed to pnv_pec_num_phbs[]. The logical changes: - pnv_pec_default_phb_realize(): * init and set the properties of the PnvPHB4 qdev * do not use stack->phb anymore; - pnv_pec_realize(): * use the new default_phb_realize() to init/realize each PHB if running with defaults; - pnv_pec_instance_init(): removed since we're creating the PHBs during pec_realize(); - pnv_phb4_get_stack(): * renamed to pnv_phb4_get_pec() and returns a PnvPhb4PecState*; - pnv_phb4_realize(): use 'phb->pec' instead of 'stack'. This design change shouldn't caused any behavioral change in the runtime of the machine. Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20220114180719.52117-7-danielhb413@gmail.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-01-18 14:56:31 +03:00
static const uint32_t pnv_pec_num_phbs[] = { 1, 2, 3 };
ppc/pnv: Add models for POWER9 PHB4 PCIe Host bridge These changes introduces models for the PCIe Host Bridge (PHB4) of the POWER9 processor. It includes the PowerBus logic interface (PBCQ), IOMMU support, a single PCIe Gen.4 Root Complex, and support for MSI and LSI interrupt sources as found on a POWER9 system using the XIVE interrupt controller. POWER9 processor comes with 3 PHB4 PEC (PCI Express Controller) and each PEC can have several PHBs. By default, * PEC0 provides 1 PHB (PHB0) * PEC1 provides 2 PHBs (PHB1 and PHB2) * PEC2 provides 3 PHBs (PHB3, PHB4 and PHB5) Each PEC has a set "global" registers and some "per-stack" (per-PHB) registers. Those are organized in two XSCOM ranges, the "Nest" range and the "PCI" range, each range contains both some "PEC" registers and some "per-stack" registers. No default device layout is provided and PCI devices can be added on any of the available PCIe Root Port (pcie.0 .. 2 of a Power9 chip) with address 0x0 as the firwware (skiboot) only accepts a single device per root port. To run a simple system with a network and a storage adapters, use a command line options such as : -device e1000e,netdev=net0,mac=C0:FF:EE:00:00:02,bus=pcie.0,addr=0x0 -netdev bridge,id=net0,helper=/usr/libexec/qemu-bridge-helper,br=virbr0,id=hostnet0 -device megasas,id=scsi0,bus=pcie.1,addr=0x0 -drive file=$disk,if=none,id=drive-scsi0-0-0-0,format=qcow2,cache=none -device scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=0,drive=drive-scsi0-0-0-0,id=scsi0-0-0-0,bootindex=2 If more are needed, include a bridge. Multi chip is supported, each chip adding its set of PHB4 controllers and its PCI busses. The model doesn't emulate the EEH error handling. This model is not ready for hotplug yet. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [ clg: - numerous cleanups - commit log - fix for broken LSI support - PHB pic printinfo - large QOM rework ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20200127144506.11132-2-clg@kaod.org> [dwg: Use device_class_set_props()] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-01-27 17:45:05 +03:00
static void pnv_pec_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
PnvXScomInterfaceClass *xdc = PNV_XSCOM_INTERFACE_CLASS(klass);
PnvPhb4PecClass *pecc = PNV_PHB4_PEC_CLASS(klass);
static const char compat[] = "ibm,power9-pbcq";
static const char stk_compat[] = "ibm,power9-phb-stack";
xdc->dt_xscom = pnv_pec_dt_xscom;
dc->realize = pnv_pec_realize;
device_class_set_props(dc, pnv_pec_properties);
dc->user_creatable = false;
ppc/pnv: Add models for POWER9 PHB4 PCIe Host bridge These changes introduces models for the PCIe Host Bridge (PHB4) of the POWER9 processor. It includes the PowerBus logic interface (PBCQ), IOMMU support, a single PCIe Gen.4 Root Complex, and support for MSI and LSI interrupt sources as found on a POWER9 system using the XIVE interrupt controller. POWER9 processor comes with 3 PHB4 PEC (PCI Express Controller) and each PEC can have several PHBs. By default, * PEC0 provides 1 PHB (PHB0) * PEC1 provides 2 PHBs (PHB1 and PHB2) * PEC2 provides 3 PHBs (PHB3, PHB4 and PHB5) Each PEC has a set "global" registers and some "per-stack" (per-PHB) registers. Those are organized in two XSCOM ranges, the "Nest" range and the "PCI" range, each range contains both some "PEC" registers and some "per-stack" registers. No default device layout is provided and PCI devices can be added on any of the available PCIe Root Port (pcie.0 .. 2 of a Power9 chip) with address 0x0 as the firwware (skiboot) only accepts a single device per root port. To run a simple system with a network and a storage adapters, use a command line options such as : -device e1000e,netdev=net0,mac=C0:FF:EE:00:00:02,bus=pcie.0,addr=0x0 -netdev bridge,id=net0,helper=/usr/libexec/qemu-bridge-helper,br=virbr0,id=hostnet0 -device megasas,id=scsi0,bus=pcie.1,addr=0x0 -drive file=$disk,if=none,id=drive-scsi0-0-0-0,format=qcow2,cache=none -device scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=0,drive=drive-scsi0-0-0-0,id=scsi0-0-0-0,bootindex=2 If more are needed, include a bridge. Multi chip is supported, each chip adding its set of PHB4 controllers and its PCI busses. The model doesn't emulate the EEH error handling. This model is not ready for hotplug yet. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [ clg: - numerous cleanups - commit log - fix for broken LSI support - PHB pic printinfo - large QOM rework ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20200127144506.11132-2-clg@kaod.org> [dwg: Use device_class_set_props()] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-01-27 17:45:05 +03:00
pecc->xscom_nest_base = pnv_pec_xscom_nest_base;
pecc->xscom_pci_base = pnv_pec_xscom_pci_base;
pecc->xscom_nest_size = PNV9_XSCOM_PEC_NEST_SIZE;
pecc->xscom_pci_size = PNV9_XSCOM_PEC_PCI_SIZE;
pecc->compat = compat;
pecc->compat_size = sizeof(compat);
pecc->stk_compat = stk_compat;
pecc->stk_compat_size = sizeof(stk_compat);
pecc->version = PNV_PHB4_VERSION;
pecc->phb_type = TYPE_PNV_PHB4;
ppc/pnv: make PECs create and realize PHB4s This patch changes the design of the PEC device to create and realize PHB4s instead of PecStacks. After all the recent changes, PHB4s now contain all the information needed for their proper functioning, not relying on PecStack in any capacity. All changes are being made in a single patch to avoid renaming parts of the PecState and leaving the code in a strange way. E.g. rename PecClass->num_stacks to num_phbs, which would then read a pnv_pec_num_stacks[] array. To avoid mixing the old and new design more than necessary it's clearer to do these changes in a single step. The name changes made are: - in PnvPhb4PecState: * rename 'num_stacks' to 'num_phbs' * remove the pec->stacks[] array. Current code relies on the pec->stacks[] obj acting as a simple container, without ever accessing pec->stacks[] for any other purpose. Instead of converting this into a pec->phbs[] array, remove it - in PnvPhb4PecClass, rename *num_stacks to *num_phbs; - pnv_pec_num_stacks[] is renamed to pnv_pec_num_phbs[]. The logical changes: - pnv_pec_default_phb_realize(): * init and set the properties of the PnvPHB4 qdev * do not use stack->phb anymore; - pnv_pec_realize(): * use the new default_phb_realize() to init/realize each PHB if running with defaults; - pnv_pec_instance_init(): removed since we're creating the PHBs during pec_realize(); - pnv_phb4_get_stack(): * renamed to pnv_phb4_get_pec() and returns a PnvPhb4PecState*; - pnv_phb4_realize(): use 'phb->pec' instead of 'stack'. This design change shouldn't caused any behavioral change in the runtime of the machine. Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20220114180719.52117-7-danielhb413@gmail.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-01-18 14:56:31 +03:00
pecc->num_phbs = pnv_pec_num_phbs;
ppc/pnv: Add models for POWER9 PHB4 PCIe Host bridge These changes introduces models for the PCIe Host Bridge (PHB4) of the POWER9 processor. It includes the PowerBus logic interface (PBCQ), IOMMU support, a single PCIe Gen.4 Root Complex, and support for MSI and LSI interrupt sources as found on a POWER9 system using the XIVE interrupt controller. POWER9 processor comes with 3 PHB4 PEC (PCI Express Controller) and each PEC can have several PHBs. By default, * PEC0 provides 1 PHB (PHB0) * PEC1 provides 2 PHBs (PHB1 and PHB2) * PEC2 provides 3 PHBs (PHB3, PHB4 and PHB5) Each PEC has a set "global" registers and some "per-stack" (per-PHB) registers. Those are organized in two XSCOM ranges, the "Nest" range and the "PCI" range, each range contains both some "PEC" registers and some "per-stack" registers. No default device layout is provided and PCI devices can be added on any of the available PCIe Root Port (pcie.0 .. 2 of a Power9 chip) with address 0x0 as the firwware (skiboot) only accepts a single device per root port. To run a simple system with a network and a storage adapters, use a command line options such as : -device e1000e,netdev=net0,mac=C0:FF:EE:00:00:02,bus=pcie.0,addr=0x0 -netdev bridge,id=net0,helper=/usr/libexec/qemu-bridge-helper,br=virbr0,id=hostnet0 -device megasas,id=scsi0,bus=pcie.1,addr=0x0 -drive file=$disk,if=none,id=drive-scsi0-0-0-0,format=qcow2,cache=none -device scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=0,drive=drive-scsi0-0-0-0,id=scsi0-0-0-0,bootindex=2 If more are needed, include a bridge. Multi chip is supported, each chip adding its set of PHB4 controllers and its PCI busses. The model doesn't emulate the EEH error handling. This model is not ready for hotplug yet. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [ clg: - numerous cleanups - commit log - fix for broken LSI support - PHB pic printinfo - large QOM rework ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20200127144506.11132-2-clg@kaod.org> [dwg: Use device_class_set_props()] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-01-27 17:45:05 +03:00
}
static const TypeInfo pnv_pec_type_info = {
.name = TYPE_PNV_PHB4_PEC,
.parent = TYPE_DEVICE,
.instance_size = sizeof(PnvPhb4PecState),
.class_init = pnv_pec_class_init,
.class_size = sizeof(PnvPhb4PecClass),
.interfaces = (InterfaceInfo[]) {
{ TYPE_PNV_XSCOM_INTERFACE },
{ }
}
};
/*
* POWER10 definitions
*/
static uint32_t pnv_phb5_pec_xscom_pci_base(PnvPhb4PecState *pec)
{
return PNV10_XSCOM_PEC_PCI_BASE + 0x1000000 * pec->index;
}
static uint32_t pnv_phb5_pec_xscom_nest_base(PnvPhb4PecState *pec)
{
/* index goes down ... */
return PNV10_XSCOM_PEC_NEST_BASE - 0x1000000 * pec->index;
}
/*
* PEC0 -> 3 stacks
* PEC1 -> 3 stacks
*/
static const uint32_t pnv_phb5_pec_num_stacks[] = { 3, 3 };
static void pnv_phb5_pec_class_init(ObjectClass *klass, void *data)
{
PnvPhb4PecClass *pecc = PNV_PHB4_PEC_CLASS(klass);
static const char compat[] = "ibm,power10-pbcq";
static const char stk_compat[] = "ibm,power10-phb-stack";
pecc->xscom_nest_base = pnv_phb5_pec_xscom_nest_base;
pecc->xscom_pci_base = pnv_phb5_pec_xscom_pci_base;
pecc->xscom_nest_size = PNV10_XSCOM_PEC_NEST_SIZE;
pecc->xscom_pci_size = PNV10_XSCOM_PEC_PCI_SIZE;
pecc->compat = compat;
pecc->compat_size = sizeof(compat);
pecc->stk_compat = stk_compat;
pecc->stk_compat_size = sizeof(stk_compat);
pecc->version = PNV_PHB5_VERSION;
pecc->phb_type = TYPE_PNV_PHB5;
pecc->num_phbs = pnv_phb5_pec_num_stacks;
}
static const TypeInfo pnv_phb5_pec_type_info = {
.name = TYPE_PNV_PHB5_PEC,
.parent = TYPE_PNV_PHB4_PEC,
.instance_size = sizeof(PnvPhb4PecState),
.class_init = pnv_phb5_pec_class_init,
.class_size = sizeof(PnvPhb4PecClass),
.interfaces = (InterfaceInfo[]) {
{ TYPE_PNV_XSCOM_INTERFACE },
{ }
}
};
ppc/pnv: Add models for POWER9 PHB4 PCIe Host bridge These changes introduces models for the PCIe Host Bridge (PHB4) of the POWER9 processor. It includes the PowerBus logic interface (PBCQ), IOMMU support, a single PCIe Gen.4 Root Complex, and support for MSI and LSI interrupt sources as found on a POWER9 system using the XIVE interrupt controller. POWER9 processor comes with 3 PHB4 PEC (PCI Express Controller) and each PEC can have several PHBs. By default, * PEC0 provides 1 PHB (PHB0) * PEC1 provides 2 PHBs (PHB1 and PHB2) * PEC2 provides 3 PHBs (PHB3, PHB4 and PHB5) Each PEC has a set "global" registers and some "per-stack" (per-PHB) registers. Those are organized in two XSCOM ranges, the "Nest" range and the "PCI" range, each range contains both some "PEC" registers and some "per-stack" registers. No default device layout is provided and PCI devices can be added on any of the available PCIe Root Port (pcie.0 .. 2 of a Power9 chip) with address 0x0 as the firwware (skiboot) only accepts a single device per root port. To run a simple system with a network and a storage adapters, use a command line options such as : -device e1000e,netdev=net0,mac=C0:FF:EE:00:00:02,bus=pcie.0,addr=0x0 -netdev bridge,id=net0,helper=/usr/libexec/qemu-bridge-helper,br=virbr0,id=hostnet0 -device megasas,id=scsi0,bus=pcie.1,addr=0x0 -drive file=$disk,if=none,id=drive-scsi0-0-0-0,format=qcow2,cache=none -device scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=0,drive=drive-scsi0-0-0-0,id=scsi0-0-0-0,bootindex=2 If more are needed, include a bridge. Multi chip is supported, each chip adding its set of PHB4 controllers and its PCI busses. The model doesn't emulate the EEH error handling. This model is not ready for hotplug yet. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [ clg: - numerous cleanups - commit log - fix for broken LSI support - PHB pic printinfo - large QOM rework ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20200127144506.11132-2-clg@kaod.org> [dwg: Use device_class_set_props()] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-01-27 17:45:05 +03:00
static void pnv_pec_register_types(void)
{
type_register_static(&pnv_pec_type_info);
type_register_static(&pnv_phb5_pec_type_info);
ppc/pnv: Add models for POWER9 PHB4 PCIe Host bridge These changes introduces models for the PCIe Host Bridge (PHB4) of the POWER9 processor. It includes the PowerBus logic interface (PBCQ), IOMMU support, a single PCIe Gen.4 Root Complex, and support for MSI and LSI interrupt sources as found on a POWER9 system using the XIVE interrupt controller. POWER9 processor comes with 3 PHB4 PEC (PCI Express Controller) and each PEC can have several PHBs. By default, * PEC0 provides 1 PHB (PHB0) * PEC1 provides 2 PHBs (PHB1 and PHB2) * PEC2 provides 3 PHBs (PHB3, PHB4 and PHB5) Each PEC has a set "global" registers and some "per-stack" (per-PHB) registers. Those are organized in two XSCOM ranges, the "Nest" range and the "PCI" range, each range contains both some "PEC" registers and some "per-stack" registers. No default device layout is provided and PCI devices can be added on any of the available PCIe Root Port (pcie.0 .. 2 of a Power9 chip) with address 0x0 as the firwware (skiboot) only accepts a single device per root port. To run a simple system with a network and a storage adapters, use a command line options such as : -device e1000e,netdev=net0,mac=C0:FF:EE:00:00:02,bus=pcie.0,addr=0x0 -netdev bridge,id=net0,helper=/usr/libexec/qemu-bridge-helper,br=virbr0,id=hostnet0 -device megasas,id=scsi0,bus=pcie.1,addr=0x0 -drive file=$disk,if=none,id=drive-scsi0-0-0-0,format=qcow2,cache=none -device scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=0,drive=drive-scsi0-0-0-0,id=scsi0-0-0-0,bootindex=2 If more are needed, include a bridge. Multi chip is supported, each chip adding its set of PHB4 controllers and its PCI busses. The model doesn't emulate the EEH error handling. This model is not ready for hotplug yet. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [ clg: - numerous cleanups - commit log - fix for broken LSI support - PHB pic printinfo - large QOM rework ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20200127144506.11132-2-clg@kaod.org> [dwg: Use device_class_set_props()] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-01-27 17:45:05 +03:00
}
type_init(pnv_pec_register_types);