ppc/pnv: Add models for POWER9 PHB4 PCIe Host bridge
These changes introduces models for the PCIe Host Bridge (PHB4) of the
POWER9 processor. It includes the PowerBus logic interface (PBCQ),
IOMMU support, a single PCIe Gen.4 Root Complex, and support for MSI
and LSI interrupt sources as found on a POWER9 system using the XIVE
interrupt controller.
POWER9 processor comes with 3 PHB4 PEC (PCI Express Controller) and
each PEC can have several PHBs. By default,
* PEC0 provides 1 PHB (PHB0)
* PEC1 provides 2 PHBs (PHB1 and PHB2)
* PEC2 provides 3 PHBs (PHB3, PHB4 and PHB5)
Each PEC has a set "global" registers and some "per-stack" (per-PHB)
registers. Those are organized in two XSCOM ranges, the "Nest" range
and the "PCI" range, each range contains both some "PEC" registers and
some "per-stack" registers.
No default device layout is provided and PCI devices can be added on
any of the available PCIe Root Port (pcie.0 .. 2 of a Power9 chip)
with address 0x0 as the firwware (skiboot) only accepts a single
device per root port. To run a simple system with a network and a
storage adapters, use a command line options such as :
-device e1000e,netdev=net0,mac=C0:FF:EE:00:00:02,bus=pcie.0,addr=0x0
-netdev bridge,id=net0,helper=/usr/libexec/qemu-bridge-helper,br=virbr0,id=hostnet0
-device megasas,id=scsi0,bus=pcie.1,addr=0x0
-drive file=$disk,if=none,id=drive-scsi0-0-0-0,format=qcow2,cache=none
-device scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=0,drive=drive-scsi0-0-0-0,id=scsi0-0-0-0,bootindex=2
If more are needed, include a bridge.
Multi chip is supported, each chip adding its set of PHB4 controllers
and its PCI busses. The model doesn't emulate the EEH error handling.
This model is not ready for hotplug yet.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[ clg: - numerous cleanups
- commit log
- fix for broken LSI support
- PHB pic printinfo
- large QOM rework ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20200127144506.11132-2-clg@kaod.org>
[dwg: Use device_class_set_props()]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-01-27 17:45:05 +03:00
|
|
|
/*
|
|
|
|
* QEMU PowerPC PowerNV (POWER9) PHB4 model
|
|
|
|
*
|
|
|
|
* Copyright (c) 2018-2020, IBM Corporation.
|
|
|
|
*
|
|
|
|
* This code is licensed under the GPL version 2 or later. See the
|
|
|
|
* COPYING file in the top-level directory.
|
|
|
|
*/
|
|
|
|
#include "qemu/osdep.h"
|
|
|
|
#include "qapi/error.h"
|
|
|
|
#include "qemu/log.h"
|
|
|
|
#include "target/ppc/cpu.h"
|
|
|
|
#include "hw/ppc/fdt.h"
|
|
|
|
#include "hw/pci-host/pnv_phb4_regs.h"
|
|
|
|
#include "hw/pci-host/pnv_phb4.h"
|
|
|
|
#include "hw/ppc/pnv_xscom.h"
|
|
|
|
#include "hw/pci/pci_bridge.h"
|
|
|
|
#include "hw/pci/pci_bus.h"
|
|
|
|
#include "hw/ppc/pnv.h"
|
|
|
|
#include "hw/qdev-properties.h"
|
2022-01-12 13:28:27 +03:00
|
|
|
#include "sysemu/sysemu.h"
|
ppc/pnv: Add models for POWER9 PHB4 PCIe Host bridge
These changes introduces models for the PCIe Host Bridge (PHB4) of the
POWER9 processor. It includes the PowerBus logic interface (PBCQ),
IOMMU support, a single PCIe Gen.4 Root Complex, and support for MSI
and LSI interrupt sources as found on a POWER9 system using the XIVE
interrupt controller.
POWER9 processor comes with 3 PHB4 PEC (PCI Express Controller) and
each PEC can have several PHBs. By default,
* PEC0 provides 1 PHB (PHB0)
* PEC1 provides 2 PHBs (PHB1 and PHB2)
* PEC2 provides 3 PHBs (PHB3, PHB4 and PHB5)
Each PEC has a set "global" registers and some "per-stack" (per-PHB)
registers. Those are organized in two XSCOM ranges, the "Nest" range
and the "PCI" range, each range contains both some "PEC" registers and
some "per-stack" registers.
No default device layout is provided and PCI devices can be added on
any of the available PCIe Root Port (pcie.0 .. 2 of a Power9 chip)
with address 0x0 as the firwware (skiboot) only accepts a single
device per root port. To run a simple system with a network and a
storage adapters, use a command line options such as :
-device e1000e,netdev=net0,mac=C0:FF:EE:00:00:02,bus=pcie.0,addr=0x0
-netdev bridge,id=net0,helper=/usr/libexec/qemu-bridge-helper,br=virbr0,id=hostnet0
-device megasas,id=scsi0,bus=pcie.1,addr=0x0
-drive file=$disk,if=none,id=drive-scsi0-0-0-0,format=qcow2,cache=none
-device scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=0,drive=drive-scsi0-0-0-0,id=scsi0-0-0-0,bootindex=2
If more are needed, include a bridge.
Multi chip is supported, each chip adding its set of PHB4 controllers
and its PCI busses. The model doesn't emulate the EEH error handling.
This model is not ready for hotplug yet.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[ clg: - numerous cleanups
- commit log
- fix for broken LSI support
- PHB pic printinfo
- large QOM rework ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20200127144506.11132-2-clg@kaod.org>
[dwg: Use device_class_set_props()]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-01-27 17:45:05 +03:00
|
|
|
|
|
|
|
#include <libfdt.h>
|
|
|
|
|
|
|
|
#define phb_pec_error(pec, fmt, ...) \
|
|
|
|
qemu_log_mask(LOG_GUEST_ERROR, "phb4_pec[%d:%d]: " fmt "\n", \
|
|
|
|
(pec)->chip_id, (pec)->index, ## __VA_ARGS__)
|
|
|
|
|
|
|
|
|
|
|
|
static uint64_t pnv_pec_nest_xscom_read(void *opaque, hwaddr addr,
|
|
|
|
unsigned size)
|
|
|
|
{
|
|
|
|
PnvPhb4PecState *pec = PNV_PHB4_PEC(opaque);
|
|
|
|
uint32_t reg = addr >> 3;
|
|
|
|
|
|
|
|
/* TODO: add list of allowed registers and error out if not */
|
|
|
|
return pec->nest_regs[reg];
|
|
|
|
}
|
|
|
|
|
|
|
|
static void pnv_pec_nest_xscom_write(void *opaque, hwaddr addr,
|
|
|
|
uint64_t val, unsigned size)
|
|
|
|
{
|
|
|
|
PnvPhb4PecState *pec = PNV_PHB4_PEC(opaque);
|
|
|
|
uint32_t reg = addr >> 3;
|
|
|
|
|
|
|
|
switch (reg) {
|
|
|
|
case PEC_NEST_PBCQ_HW_CONFIG:
|
|
|
|
case PEC_NEST_DROP_PRIO_CTRL:
|
|
|
|
case PEC_NEST_PBCQ_ERR_INJECT:
|
|
|
|
case PEC_NEST_PCI_NEST_CLK_TRACE_CTL:
|
|
|
|
case PEC_NEST_PBCQ_PMON_CTRL:
|
|
|
|
case PEC_NEST_PBCQ_PBUS_ADDR_EXT:
|
|
|
|
case PEC_NEST_PBCQ_PRED_VEC_TIMEOUT:
|
|
|
|
case PEC_NEST_CAPP_CTRL:
|
|
|
|
case PEC_NEST_PBCQ_READ_STK_OVR:
|
|
|
|
case PEC_NEST_PBCQ_WRITE_STK_OVR:
|
|
|
|
case PEC_NEST_PBCQ_STORE_STK_OVR:
|
|
|
|
case PEC_NEST_PBCQ_RETRY_BKOFF_CTRL:
|
|
|
|
pec->nest_regs[reg] = val;
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
phb_pec_error(pec, "%s @0x%"HWADDR_PRIx"=%"PRIx64"\n", __func__,
|
|
|
|
addr, val);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static const MemoryRegionOps pnv_pec_nest_xscom_ops = {
|
|
|
|
.read = pnv_pec_nest_xscom_read,
|
|
|
|
.write = pnv_pec_nest_xscom_write,
|
|
|
|
.valid.min_access_size = 8,
|
|
|
|
.valid.max_access_size = 8,
|
|
|
|
.impl.min_access_size = 8,
|
|
|
|
.impl.max_access_size = 8,
|
|
|
|
.endianness = DEVICE_BIG_ENDIAN,
|
|
|
|
};
|
|
|
|
|
|
|
|
static uint64_t pnv_pec_pci_xscom_read(void *opaque, hwaddr addr,
|
|
|
|
unsigned size)
|
|
|
|
{
|
|
|
|
PnvPhb4PecState *pec = PNV_PHB4_PEC(opaque);
|
|
|
|
uint32_t reg = addr >> 3;
|
|
|
|
|
|
|
|
/* TODO: add list of allowed registers and error out if not */
|
|
|
|
return pec->pci_regs[reg];
|
|
|
|
}
|
|
|
|
|
|
|
|
static void pnv_pec_pci_xscom_write(void *opaque, hwaddr addr,
|
|
|
|
uint64_t val, unsigned size)
|
|
|
|
{
|
|
|
|
PnvPhb4PecState *pec = PNV_PHB4_PEC(opaque);
|
|
|
|
uint32_t reg = addr >> 3;
|
|
|
|
|
|
|
|
switch (reg) {
|
|
|
|
case PEC_PCI_PBAIB_HW_CONFIG:
|
|
|
|
case PEC_PCI_PBAIB_READ_STK_OVR:
|
|
|
|
pec->pci_regs[reg] = val;
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
phb_pec_error(pec, "%s @0x%"HWADDR_PRIx"=%"PRIx64"\n", __func__,
|
|
|
|
addr, val);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static const MemoryRegionOps pnv_pec_pci_xscom_ops = {
|
|
|
|
.read = pnv_pec_pci_xscom_read,
|
|
|
|
.write = pnv_pec_pci_xscom_write,
|
|
|
|
.valid.min_access_size = 8,
|
|
|
|
.valid.max_access_size = 8,
|
|
|
|
.impl.min_access_size = 8,
|
|
|
|
.impl.max_access_size = 8,
|
|
|
|
.endianness = DEVICE_BIG_ENDIAN,
|
|
|
|
};
|
|
|
|
|
2022-01-18 14:56:31 +03:00
|
|
|
static void pnv_pec_default_phb_realize(PnvPhb4PecState *pec,
|
2022-01-18 14:56:31 +03:00
|
|
|
int stack_no,
|
|
|
|
Error **errp)
|
|
|
|
{
|
2022-03-14 17:57:17 +03:00
|
|
|
PnvPhb4PecClass *pecc = PNV_PHB4_PEC_GET_CLASS(pec);
|
|
|
|
PnvPHB4 *phb = PNV_PHB4(qdev_new(pecc->phb_type));
|
2022-01-18 14:56:31 +03:00
|
|
|
int phb_id = pnv_phb4_pec_get_phb_id(pec, stack_no);
|
|
|
|
|
ppc/pnv: Remove user-created PHB{3,4,5} devices
On a real system with POWER{8,9,10} processors, PHBs are sub-units of
the processor, they can be deactivated by firmware but not plugged in
or out like a PCI adapter on a slot. Nevertheless, having user-created
PHBs in QEMU seemed to be a good idea for testing purposes :
1. having a limited set of PHBs speedups boot time.
2. it is useful to be able to mimic a partially broken topology you
some time have to deal with during bring-up.
PowerNV is also used for distro install tests and having libvirt
support eases these tasks. libvirt prefers to run the machine with
-nodefaults to be sure not to drag unexpected devices which would need
to be defined in the domain file without being specified on the QEMU
command line. For this reason :
3. -nodefaults should not include default PHBs
User-created PHB{3,4,5} devices satisfied all these needs but reality
proves to be a bit more complex, internally when modeling such
devices, and externally when dealing with the user interface.
Req 1. and 2. can be simply addressed differently with a machine option:
"phb-mask=<uint>", which QEMU would use to enable/disable PHB device
nodes when creating the device tree.
For Req 3., we need to make sure we are taking the right approach. It
seems that we should expose a new type of user-created PHB device, a
generic virtualized one, that libvirt would use and not one depending
on the processor revision. This needs more thinking.
For now, remove user-created PHB{3,4,5} devices. All the cleanups we
did are not lost and they will be useful for the next steps.
Fixes: 5bc67b052b51 ("ppc/pnv: Introduce user creatable pnv-phb4 devices")
Fixes: 1f6a88fffc75 ("ppc/pnv: Introduce support for user created PHB3 devices")
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220314130514.529931-1-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-03-14 17:57:17 +03:00
|
|
|
object_property_add_child(OBJECT(pec), "phb[*]", OBJECT(phb));
|
2022-01-18 14:56:31 +03:00
|
|
|
object_property_set_link(OBJECT(phb), "pec", OBJECT(pec),
|
2022-01-18 14:56:31 +03:00
|
|
|
&error_abort);
|
2022-01-18 14:56:31 +03:00
|
|
|
object_property_set_int(OBJECT(phb), "chip-id", pec->chip_id,
|
2022-01-18 14:56:31 +03:00
|
|
|
&error_fatal);
|
2022-01-18 14:56:31 +03:00
|
|
|
object_property_set_int(OBJECT(phb), "index", phb_id,
|
2022-01-18 14:56:31 +03:00
|
|
|
&error_fatal);
|
|
|
|
|
2022-01-18 14:56:31 +03:00
|
|
|
if (!sysbus_realize(SYS_BUS_DEVICE(phb), errp)) {
|
2022-01-18 14:56:31 +03:00
|
|
|
return;
|
|
|
|
}
|
2022-01-18 14:56:31 +03:00
|
|
|
|
|
|
|
/* Add a single Root port if running with defaults */
|
2022-03-14 17:57:17 +03:00
|
|
|
pnv_phb_attach_root_port(PCI_HOST_BRIDGE(phb), pecc->rp_model);
|
2022-01-18 14:56:31 +03:00
|
|
|
}
|
|
|
|
|
ppc/pnv: Add models for POWER9 PHB4 PCIe Host bridge
These changes introduces models for the PCIe Host Bridge (PHB4) of the
POWER9 processor. It includes the PowerBus logic interface (PBCQ),
IOMMU support, a single PCIe Gen.4 Root Complex, and support for MSI
and LSI interrupt sources as found on a POWER9 system using the XIVE
interrupt controller.
POWER9 processor comes with 3 PHB4 PEC (PCI Express Controller) and
each PEC can have several PHBs. By default,
* PEC0 provides 1 PHB (PHB0)
* PEC1 provides 2 PHBs (PHB1 and PHB2)
* PEC2 provides 3 PHBs (PHB3, PHB4 and PHB5)
Each PEC has a set "global" registers and some "per-stack" (per-PHB)
registers. Those are organized in two XSCOM ranges, the "Nest" range
and the "PCI" range, each range contains both some "PEC" registers and
some "per-stack" registers.
No default device layout is provided and PCI devices can be added on
any of the available PCIe Root Port (pcie.0 .. 2 of a Power9 chip)
with address 0x0 as the firwware (skiboot) only accepts a single
device per root port. To run a simple system with a network and a
storage adapters, use a command line options such as :
-device e1000e,netdev=net0,mac=C0:FF:EE:00:00:02,bus=pcie.0,addr=0x0
-netdev bridge,id=net0,helper=/usr/libexec/qemu-bridge-helper,br=virbr0,id=hostnet0
-device megasas,id=scsi0,bus=pcie.1,addr=0x0
-drive file=$disk,if=none,id=drive-scsi0-0-0-0,format=qcow2,cache=none
-device scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=0,drive=drive-scsi0-0-0-0,id=scsi0-0-0-0,bootindex=2
If more are needed, include a bridge.
Multi chip is supported, each chip adding its set of PHB4 controllers
and its PCI busses. The model doesn't emulate the EEH error handling.
This model is not ready for hotplug yet.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[ clg: - numerous cleanups
- commit log
- fix for broken LSI support
- PHB pic printinfo
- large QOM rework ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20200127144506.11132-2-clg@kaod.org>
[dwg: Use device_class_set_props()]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-01-27 17:45:05 +03:00
|
|
|
static void pnv_pec_realize(DeviceState *dev, Error **errp)
|
|
|
|
{
|
|
|
|
PnvPhb4PecState *pec = PNV_PHB4_PEC(dev);
|
2021-12-17 19:57:19 +03:00
|
|
|
PnvPhb4PecClass *pecc = PNV_PHB4_PEC_GET_CLASS(pec);
|
ppc/pnv: Add models for POWER9 PHB4 PCIe Host bridge
These changes introduces models for the PCIe Host Bridge (PHB4) of the
POWER9 processor. It includes the PowerBus logic interface (PBCQ),
IOMMU support, a single PCIe Gen.4 Root Complex, and support for MSI
and LSI interrupt sources as found on a POWER9 system using the XIVE
interrupt controller.
POWER9 processor comes with 3 PHB4 PEC (PCI Express Controller) and
each PEC can have several PHBs. By default,
* PEC0 provides 1 PHB (PHB0)
* PEC1 provides 2 PHBs (PHB1 and PHB2)
* PEC2 provides 3 PHBs (PHB3, PHB4 and PHB5)
Each PEC has a set "global" registers and some "per-stack" (per-PHB)
registers. Those are organized in two XSCOM ranges, the "Nest" range
and the "PCI" range, each range contains both some "PEC" registers and
some "per-stack" registers.
No default device layout is provided and PCI devices can be added on
any of the available PCIe Root Port (pcie.0 .. 2 of a Power9 chip)
with address 0x0 as the firwware (skiboot) only accepts a single
device per root port. To run a simple system with a network and a
storage adapters, use a command line options such as :
-device e1000e,netdev=net0,mac=C0:FF:EE:00:00:02,bus=pcie.0,addr=0x0
-netdev bridge,id=net0,helper=/usr/libexec/qemu-bridge-helper,br=virbr0,id=hostnet0
-device megasas,id=scsi0,bus=pcie.1,addr=0x0
-drive file=$disk,if=none,id=drive-scsi0-0-0-0,format=qcow2,cache=none
-device scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=0,drive=drive-scsi0-0-0-0,id=scsi0-0-0-0,bootindex=2
If more are needed, include a bridge.
Multi chip is supported, each chip adding its set of PHB4 controllers
and its PCI busses. The model doesn't emulate the EEH error handling.
This model is not ready for hotplug yet.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[ clg: - numerous cleanups
- commit log
- fix for broken LSI support
- PHB pic printinfo
- large QOM rework ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20200127144506.11132-2-clg@kaod.org>
[dwg: Use device_class_set_props()]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-01-27 17:45:05 +03:00
|
|
|
char name[64];
|
|
|
|
int i;
|
|
|
|
|
2021-12-17 19:57:19 +03:00
|
|
|
if (pec->index >= PNV_CHIP_GET_CLASS(pec->chip)->num_pecs) {
|
|
|
|
error_setg(errp, "invalid PEC index: %d", pec->index);
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
2022-01-18 14:56:31 +03:00
|
|
|
pec->num_phbs = pecc->num_phbs[pec->index];
|
2022-01-18 14:56:31 +03:00
|
|
|
|
2022-01-18 14:56:31 +03:00
|
|
|
/* Create PHBs if running with defaults */
|
ppc/pnv: Remove user-created PHB{3,4,5} devices
On a real system with POWER{8,9,10} processors, PHBs are sub-units of
the processor, they can be deactivated by firmware but not plugged in
or out like a PCI adapter on a slot. Nevertheless, having user-created
PHBs in QEMU seemed to be a good idea for testing purposes :
1. having a limited set of PHBs speedups boot time.
2. it is useful to be able to mimic a partially broken topology you
some time have to deal with during bring-up.
PowerNV is also used for distro install tests and having libvirt
support eases these tasks. libvirt prefers to run the machine with
-nodefaults to be sure not to drag unexpected devices which would need
to be defined in the domain file without being specified on the QEMU
command line. For this reason :
3. -nodefaults should not include default PHBs
User-created PHB{3,4,5} devices satisfied all these needs but reality
proves to be a bit more complex, internally when modeling such
devices, and externally when dealing with the user interface.
Req 1. and 2. can be simply addressed differently with a machine option:
"phb-mask=<uint>", which QEMU would use to enable/disable PHB device
nodes when creating the device tree.
For Req 3., we need to make sure we are taking the right approach. It
seems that we should expose a new type of user-created PHB device, a
generic virtualized one, that libvirt would use and not one depending
on the processor revision. This needs more thinking.
For now, remove user-created PHB{3,4,5} devices. All the cleanups we
did are not lost and they will be useful for the next steps.
Fixes: 5bc67b052b51 ("ppc/pnv: Introduce user creatable pnv-phb4 devices")
Fixes: 1f6a88fffc75 ("ppc/pnv: Introduce support for user created PHB3 devices")
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220314130514.529931-1-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-03-14 17:57:17 +03:00
|
|
|
for (i = 0; i < pec->num_phbs; i++) {
|
|
|
|
pnv_pec_default_phb_realize(pec, i, errp);
|
2020-06-09 15:23:26 +03:00
|
|
|
}
|
ppc/pnv: Add models for POWER9 PHB4 PCIe Host bridge
These changes introduces models for the PCIe Host Bridge (PHB4) of the
POWER9 processor. It includes the PowerBus logic interface (PBCQ),
IOMMU support, a single PCIe Gen.4 Root Complex, and support for MSI
and LSI interrupt sources as found on a POWER9 system using the XIVE
interrupt controller.
POWER9 processor comes with 3 PHB4 PEC (PCI Express Controller) and
each PEC can have several PHBs. By default,
* PEC0 provides 1 PHB (PHB0)
* PEC1 provides 2 PHBs (PHB1 and PHB2)
* PEC2 provides 3 PHBs (PHB3, PHB4 and PHB5)
Each PEC has a set "global" registers and some "per-stack" (per-PHB)
registers. Those are organized in two XSCOM ranges, the "Nest" range
and the "PCI" range, each range contains both some "PEC" registers and
some "per-stack" registers.
No default device layout is provided and PCI devices can be added on
any of the available PCIe Root Port (pcie.0 .. 2 of a Power9 chip)
with address 0x0 as the firwware (skiboot) only accepts a single
device per root port. To run a simple system with a network and a
storage adapters, use a command line options such as :
-device e1000e,netdev=net0,mac=C0:FF:EE:00:00:02,bus=pcie.0,addr=0x0
-netdev bridge,id=net0,helper=/usr/libexec/qemu-bridge-helper,br=virbr0,id=hostnet0
-device megasas,id=scsi0,bus=pcie.1,addr=0x0
-drive file=$disk,if=none,id=drive-scsi0-0-0-0,format=qcow2,cache=none
-device scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=0,drive=drive-scsi0-0-0-0,id=scsi0-0-0-0,bootindex=2
If more are needed, include a bridge.
Multi chip is supported, each chip adding its set of PHB4 controllers
and its PCI busses. The model doesn't emulate the EEH error handling.
This model is not ready for hotplug yet.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[ clg: - numerous cleanups
- commit log
- fix for broken LSI support
- PHB pic printinfo
- large QOM rework ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20200127144506.11132-2-clg@kaod.org>
[dwg: Use device_class_set_props()]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-01-27 17:45:05 +03:00
|
|
|
|
|
|
|
/* Initialize the XSCOM regions for the PEC registers */
|
|
|
|
snprintf(name, sizeof(name), "xscom-pec-%d.%d-nest", pec->chip_id,
|
|
|
|
pec->index);
|
|
|
|
pnv_xscom_region_init(&pec->nest_regs_mr, OBJECT(dev),
|
|
|
|
&pnv_pec_nest_xscom_ops, pec, name,
|
|
|
|
PHB4_PEC_NEST_REGS_COUNT);
|
|
|
|
|
|
|
|
snprintf(name, sizeof(name), "xscom-pec-%d.%d-pci", pec->chip_id,
|
|
|
|
pec->index);
|
|
|
|
pnv_xscom_region_init(&pec->pci_regs_mr, OBJECT(dev),
|
|
|
|
&pnv_pec_pci_xscom_ops, pec, name,
|
|
|
|
PHB4_PEC_PCI_REGS_COUNT);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int pnv_pec_dt_xscom(PnvXScomInterface *dev, void *fdt,
|
|
|
|
int xscom_offset)
|
|
|
|
{
|
|
|
|
PnvPhb4PecState *pec = PNV_PHB4_PEC(dev);
|
|
|
|
PnvPhb4PecClass *pecc = PNV_PHB4_PEC_GET_CLASS(dev);
|
|
|
|
uint32_t nbase = pecc->xscom_nest_base(pec);
|
|
|
|
uint32_t pbase = pecc->xscom_pci_base(pec);
|
|
|
|
int offset, i;
|
|
|
|
char *name;
|
|
|
|
uint32_t reg[] = {
|
|
|
|
cpu_to_be32(nbase),
|
|
|
|
cpu_to_be32(pecc->xscom_nest_size),
|
|
|
|
cpu_to_be32(pbase),
|
|
|
|
cpu_to_be32(pecc->xscom_pci_size),
|
|
|
|
};
|
|
|
|
|
|
|
|
name = g_strdup_printf("pbcq@%x", nbase);
|
|
|
|
offset = fdt_add_subnode(fdt, xscom_offset, name);
|
|
|
|
_FDT(offset);
|
|
|
|
g_free(name);
|
|
|
|
|
|
|
|
_FDT((fdt_setprop(fdt, offset, "reg", reg, sizeof(reg))));
|
|
|
|
|
|
|
|
_FDT((fdt_setprop_cell(fdt, offset, "ibm,pec-index", pec->index)));
|
|
|
|
_FDT((fdt_setprop_cell(fdt, offset, "#address-cells", 1)));
|
|
|
|
_FDT((fdt_setprop_cell(fdt, offset, "#size-cells", 0)));
|
|
|
|
_FDT((fdt_setprop(fdt, offset, "compatible", pecc->compat,
|
|
|
|
pecc->compat_size)));
|
|
|
|
|
2022-01-18 14:56:31 +03:00
|
|
|
for (i = 0; i < pec->num_phbs; i++) {
|
2022-01-12 13:28:27 +03:00
|
|
|
int phb_id = pnv_phb4_pec_get_phb_id(pec, i);
|
ppc/pnv: Add models for POWER9 PHB4 PCIe Host bridge
These changes introduces models for the PCIe Host Bridge (PHB4) of the
POWER9 processor. It includes the PowerBus logic interface (PBCQ),
IOMMU support, a single PCIe Gen.4 Root Complex, and support for MSI
and LSI interrupt sources as found on a POWER9 system using the XIVE
interrupt controller.
POWER9 processor comes with 3 PHB4 PEC (PCI Express Controller) and
each PEC can have several PHBs. By default,
* PEC0 provides 1 PHB (PHB0)
* PEC1 provides 2 PHBs (PHB1 and PHB2)
* PEC2 provides 3 PHBs (PHB3, PHB4 and PHB5)
Each PEC has a set "global" registers and some "per-stack" (per-PHB)
registers. Those are organized in two XSCOM ranges, the "Nest" range
and the "PCI" range, each range contains both some "PEC" registers and
some "per-stack" registers.
No default device layout is provided and PCI devices can be added on
any of the available PCIe Root Port (pcie.0 .. 2 of a Power9 chip)
with address 0x0 as the firwware (skiboot) only accepts a single
device per root port. To run a simple system with a network and a
storage adapters, use a command line options such as :
-device e1000e,netdev=net0,mac=C0:FF:EE:00:00:02,bus=pcie.0,addr=0x0
-netdev bridge,id=net0,helper=/usr/libexec/qemu-bridge-helper,br=virbr0,id=hostnet0
-device megasas,id=scsi0,bus=pcie.1,addr=0x0
-drive file=$disk,if=none,id=drive-scsi0-0-0-0,format=qcow2,cache=none
-device scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=0,drive=drive-scsi0-0-0-0,id=scsi0-0-0-0,bootindex=2
If more are needed, include a bridge.
Multi chip is supported, each chip adding its set of PHB4 controllers
and its PCI busses. The model doesn't emulate the EEH error handling.
This model is not ready for hotplug yet.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[ clg: - numerous cleanups
- commit log
- fix for broken LSI support
- PHB pic printinfo
- large QOM rework ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20200127144506.11132-2-clg@kaod.org>
[dwg: Use device_class_set_props()]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-01-27 17:45:05 +03:00
|
|
|
int stk_offset;
|
|
|
|
|
|
|
|
name = g_strdup_printf("stack@%x", i);
|
|
|
|
stk_offset = fdt_add_subnode(fdt, offset, name);
|
|
|
|
_FDT(stk_offset);
|
|
|
|
g_free(name);
|
|
|
|
_FDT((fdt_setprop(fdt, stk_offset, "compatible", pecc->stk_compat,
|
|
|
|
pecc->stk_compat_size)));
|
|
|
|
_FDT((fdt_setprop_cell(fdt, stk_offset, "reg", i)));
|
2022-01-12 13:28:27 +03:00
|
|
|
_FDT((fdt_setprop_cell(fdt, stk_offset, "ibm,phb-index", phb_id)));
|
ppc/pnv: Add models for POWER9 PHB4 PCIe Host bridge
These changes introduces models for the PCIe Host Bridge (PHB4) of the
POWER9 processor. It includes the PowerBus logic interface (PBCQ),
IOMMU support, a single PCIe Gen.4 Root Complex, and support for MSI
and LSI interrupt sources as found on a POWER9 system using the XIVE
interrupt controller.
POWER9 processor comes with 3 PHB4 PEC (PCI Express Controller) and
each PEC can have several PHBs. By default,
* PEC0 provides 1 PHB (PHB0)
* PEC1 provides 2 PHBs (PHB1 and PHB2)
* PEC2 provides 3 PHBs (PHB3, PHB4 and PHB5)
Each PEC has a set "global" registers and some "per-stack" (per-PHB)
registers. Those are organized in two XSCOM ranges, the "Nest" range
and the "PCI" range, each range contains both some "PEC" registers and
some "per-stack" registers.
No default device layout is provided and PCI devices can be added on
any of the available PCIe Root Port (pcie.0 .. 2 of a Power9 chip)
with address 0x0 as the firwware (skiboot) only accepts a single
device per root port. To run a simple system with a network and a
storage adapters, use a command line options such as :
-device e1000e,netdev=net0,mac=C0:FF:EE:00:00:02,bus=pcie.0,addr=0x0
-netdev bridge,id=net0,helper=/usr/libexec/qemu-bridge-helper,br=virbr0,id=hostnet0
-device megasas,id=scsi0,bus=pcie.1,addr=0x0
-drive file=$disk,if=none,id=drive-scsi0-0-0-0,format=qcow2,cache=none
-device scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=0,drive=drive-scsi0-0-0-0,id=scsi0-0-0-0,bootindex=2
If more are needed, include a bridge.
Multi chip is supported, each chip adding its set of PHB4 controllers
and its PCI busses. The model doesn't emulate the EEH error handling.
This model is not ready for hotplug yet.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[ clg: - numerous cleanups
- commit log
- fix for broken LSI support
- PHB pic printinfo
- large QOM rework ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20200127144506.11132-2-clg@kaod.org>
[dwg: Use device_class_set_props()]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-01-27 17:45:05 +03:00
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static Property pnv_pec_properties[] = {
|
|
|
|
DEFINE_PROP_UINT32("index", PnvPhb4PecState, index, 0),
|
|
|
|
DEFINE_PROP_UINT32("chip-id", PnvPhb4PecState, chip_id, 0),
|
2021-12-17 19:57:19 +03:00
|
|
|
DEFINE_PROP_LINK("chip", PnvPhb4PecState, chip, TYPE_PNV_CHIP,
|
|
|
|
PnvChip *),
|
ppc/pnv: Add models for POWER9 PHB4 PCIe Host bridge
These changes introduces models for the PCIe Host Bridge (PHB4) of the
POWER9 processor. It includes the PowerBus logic interface (PBCQ),
IOMMU support, a single PCIe Gen.4 Root Complex, and support for MSI
and LSI interrupt sources as found on a POWER9 system using the XIVE
interrupt controller.
POWER9 processor comes with 3 PHB4 PEC (PCI Express Controller) and
each PEC can have several PHBs. By default,
* PEC0 provides 1 PHB (PHB0)
* PEC1 provides 2 PHBs (PHB1 and PHB2)
* PEC2 provides 3 PHBs (PHB3, PHB4 and PHB5)
Each PEC has a set "global" registers and some "per-stack" (per-PHB)
registers. Those are organized in two XSCOM ranges, the "Nest" range
and the "PCI" range, each range contains both some "PEC" registers and
some "per-stack" registers.
No default device layout is provided and PCI devices can be added on
any of the available PCIe Root Port (pcie.0 .. 2 of a Power9 chip)
with address 0x0 as the firwware (skiboot) only accepts a single
device per root port. To run a simple system with a network and a
storage adapters, use a command line options such as :
-device e1000e,netdev=net0,mac=C0:FF:EE:00:00:02,bus=pcie.0,addr=0x0
-netdev bridge,id=net0,helper=/usr/libexec/qemu-bridge-helper,br=virbr0,id=hostnet0
-device megasas,id=scsi0,bus=pcie.1,addr=0x0
-drive file=$disk,if=none,id=drive-scsi0-0-0-0,format=qcow2,cache=none
-device scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=0,drive=drive-scsi0-0-0-0,id=scsi0-0-0-0,bootindex=2
If more are needed, include a bridge.
Multi chip is supported, each chip adding its set of PHB4 controllers
and its PCI busses. The model doesn't emulate the EEH error handling.
This model is not ready for hotplug yet.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[ clg: - numerous cleanups
- commit log
- fix for broken LSI support
- PHB pic printinfo
- large QOM rework ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20200127144506.11132-2-clg@kaod.org>
[dwg: Use device_class_set_props()]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-01-27 17:45:05 +03:00
|
|
|
DEFINE_PROP_END_OF_LIST(),
|
|
|
|
};
|
|
|
|
|
|
|
|
static uint32_t pnv_pec_xscom_pci_base(PnvPhb4PecState *pec)
|
|
|
|
{
|
|
|
|
return PNV9_XSCOM_PEC_PCI_BASE + 0x1000000 * pec->index;
|
|
|
|
}
|
|
|
|
|
|
|
|
static uint32_t pnv_pec_xscom_nest_base(PnvPhb4PecState *pec)
|
|
|
|
{
|
|
|
|
return PNV9_XSCOM_PEC_NEST_BASE + 0x400 * pec->index;
|
|
|
|
}
|
|
|
|
|
2021-12-17 19:57:19 +03:00
|
|
|
/*
|
2022-01-18 14:56:31 +03:00
|
|
|
* PEC0 -> 1 phb
|
|
|
|
* PEC1 -> 2 phb
|
|
|
|
* PEC2 -> 3 phbs
|
2021-12-17 19:57:19 +03:00
|
|
|
*/
|
2022-01-18 14:56:31 +03:00
|
|
|
static const uint32_t pnv_pec_num_phbs[] = { 1, 2, 3 };
|
2021-12-17 19:57:19 +03:00
|
|
|
|
ppc/pnv: Add models for POWER9 PHB4 PCIe Host bridge
These changes introduces models for the PCIe Host Bridge (PHB4) of the
POWER9 processor. It includes the PowerBus logic interface (PBCQ),
IOMMU support, a single PCIe Gen.4 Root Complex, and support for MSI
and LSI interrupt sources as found on a POWER9 system using the XIVE
interrupt controller.
POWER9 processor comes with 3 PHB4 PEC (PCI Express Controller) and
each PEC can have several PHBs. By default,
* PEC0 provides 1 PHB (PHB0)
* PEC1 provides 2 PHBs (PHB1 and PHB2)
* PEC2 provides 3 PHBs (PHB3, PHB4 and PHB5)
Each PEC has a set "global" registers and some "per-stack" (per-PHB)
registers. Those are organized in two XSCOM ranges, the "Nest" range
and the "PCI" range, each range contains both some "PEC" registers and
some "per-stack" registers.
No default device layout is provided and PCI devices can be added on
any of the available PCIe Root Port (pcie.0 .. 2 of a Power9 chip)
with address 0x0 as the firwware (skiboot) only accepts a single
device per root port. To run a simple system with a network and a
storage adapters, use a command line options such as :
-device e1000e,netdev=net0,mac=C0:FF:EE:00:00:02,bus=pcie.0,addr=0x0
-netdev bridge,id=net0,helper=/usr/libexec/qemu-bridge-helper,br=virbr0,id=hostnet0
-device megasas,id=scsi0,bus=pcie.1,addr=0x0
-drive file=$disk,if=none,id=drive-scsi0-0-0-0,format=qcow2,cache=none
-device scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=0,drive=drive-scsi0-0-0-0,id=scsi0-0-0-0,bootindex=2
If more are needed, include a bridge.
Multi chip is supported, each chip adding its set of PHB4 controllers
and its PCI busses. The model doesn't emulate the EEH error handling.
This model is not ready for hotplug yet.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[ clg: - numerous cleanups
- commit log
- fix for broken LSI support
- PHB pic printinfo
- large QOM rework ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20200127144506.11132-2-clg@kaod.org>
[dwg: Use device_class_set_props()]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-01-27 17:45:05 +03:00
|
|
|
static void pnv_pec_class_init(ObjectClass *klass, void *data)
|
|
|
|
{
|
|
|
|
DeviceClass *dc = DEVICE_CLASS(klass);
|
|
|
|
PnvXScomInterfaceClass *xdc = PNV_XSCOM_INTERFACE_CLASS(klass);
|
|
|
|
PnvPhb4PecClass *pecc = PNV_PHB4_PEC_CLASS(klass);
|
|
|
|
static const char compat[] = "ibm,power9-pbcq";
|
|
|
|
static const char stk_compat[] = "ibm,power9-phb-stack";
|
|
|
|
|
|
|
|
xdc->dt_xscom = pnv_pec_dt_xscom;
|
|
|
|
|
|
|
|
dc->realize = pnv_pec_realize;
|
|
|
|
device_class_set_props(dc, pnv_pec_properties);
|
2020-01-29 14:37:20 +03:00
|
|
|
dc->user_creatable = false;
|
ppc/pnv: Add models for POWER9 PHB4 PCIe Host bridge
These changes introduces models for the PCIe Host Bridge (PHB4) of the
POWER9 processor. It includes the PowerBus logic interface (PBCQ),
IOMMU support, a single PCIe Gen.4 Root Complex, and support for MSI
and LSI interrupt sources as found on a POWER9 system using the XIVE
interrupt controller.
POWER9 processor comes with 3 PHB4 PEC (PCI Express Controller) and
each PEC can have several PHBs. By default,
* PEC0 provides 1 PHB (PHB0)
* PEC1 provides 2 PHBs (PHB1 and PHB2)
* PEC2 provides 3 PHBs (PHB3, PHB4 and PHB5)
Each PEC has a set "global" registers and some "per-stack" (per-PHB)
registers. Those are organized in two XSCOM ranges, the "Nest" range
and the "PCI" range, each range contains both some "PEC" registers and
some "per-stack" registers.
No default device layout is provided and PCI devices can be added on
any of the available PCIe Root Port (pcie.0 .. 2 of a Power9 chip)
with address 0x0 as the firwware (skiboot) only accepts a single
device per root port. To run a simple system with a network and a
storage adapters, use a command line options such as :
-device e1000e,netdev=net0,mac=C0:FF:EE:00:00:02,bus=pcie.0,addr=0x0
-netdev bridge,id=net0,helper=/usr/libexec/qemu-bridge-helper,br=virbr0,id=hostnet0
-device megasas,id=scsi0,bus=pcie.1,addr=0x0
-drive file=$disk,if=none,id=drive-scsi0-0-0-0,format=qcow2,cache=none
-device scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=0,drive=drive-scsi0-0-0-0,id=scsi0-0-0-0,bootindex=2
If more are needed, include a bridge.
Multi chip is supported, each chip adding its set of PHB4 controllers
and its PCI busses. The model doesn't emulate the EEH error handling.
This model is not ready for hotplug yet.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[ clg: - numerous cleanups
- commit log
- fix for broken LSI support
- PHB pic printinfo
- large QOM rework ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20200127144506.11132-2-clg@kaod.org>
[dwg: Use device_class_set_props()]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-01-27 17:45:05 +03:00
|
|
|
|
|
|
|
pecc->xscom_nest_base = pnv_pec_xscom_nest_base;
|
|
|
|
pecc->xscom_pci_base = pnv_pec_xscom_pci_base;
|
|
|
|
pecc->xscom_nest_size = PNV9_XSCOM_PEC_NEST_SIZE;
|
|
|
|
pecc->xscom_pci_size = PNV9_XSCOM_PEC_PCI_SIZE;
|
|
|
|
pecc->compat = compat;
|
|
|
|
pecc->compat_size = sizeof(compat);
|
|
|
|
pecc->stk_compat = stk_compat;
|
|
|
|
pecc->stk_compat_size = sizeof(stk_compat);
|
2021-12-17 19:57:19 +03:00
|
|
|
pecc->version = PNV_PHB4_VERSION;
|
2022-03-14 17:57:17 +03:00
|
|
|
pecc->phb_type = TYPE_PNV_PHB4;
|
2022-01-18 14:56:31 +03:00
|
|
|
pecc->num_phbs = pnv_pec_num_phbs;
|
2022-01-18 14:56:31 +03:00
|
|
|
pecc->rp_model = TYPE_PNV_PHB4_ROOT_PORT;
|
ppc/pnv: Add models for POWER9 PHB4 PCIe Host bridge
These changes introduces models for the PCIe Host Bridge (PHB4) of the
POWER9 processor. It includes the PowerBus logic interface (PBCQ),
IOMMU support, a single PCIe Gen.4 Root Complex, and support for MSI
and LSI interrupt sources as found on a POWER9 system using the XIVE
interrupt controller.
POWER9 processor comes with 3 PHB4 PEC (PCI Express Controller) and
each PEC can have several PHBs. By default,
* PEC0 provides 1 PHB (PHB0)
* PEC1 provides 2 PHBs (PHB1 and PHB2)
* PEC2 provides 3 PHBs (PHB3, PHB4 and PHB5)
Each PEC has a set "global" registers and some "per-stack" (per-PHB)
registers. Those are organized in two XSCOM ranges, the "Nest" range
and the "PCI" range, each range contains both some "PEC" registers and
some "per-stack" registers.
No default device layout is provided and PCI devices can be added on
any of the available PCIe Root Port (pcie.0 .. 2 of a Power9 chip)
with address 0x0 as the firwware (skiboot) only accepts a single
device per root port. To run a simple system with a network and a
storage adapters, use a command line options such as :
-device e1000e,netdev=net0,mac=C0:FF:EE:00:00:02,bus=pcie.0,addr=0x0
-netdev bridge,id=net0,helper=/usr/libexec/qemu-bridge-helper,br=virbr0,id=hostnet0
-device megasas,id=scsi0,bus=pcie.1,addr=0x0
-drive file=$disk,if=none,id=drive-scsi0-0-0-0,format=qcow2,cache=none
-device scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=0,drive=drive-scsi0-0-0-0,id=scsi0-0-0-0,bootindex=2
If more are needed, include a bridge.
Multi chip is supported, each chip adding its set of PHB4 controllers
and its PCI busses. The model doesn't emulate the EEH error handling.
This model is not ready for hotplug yet.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[ clg: - numerous cleanups
- commit log
- fix for broken LSI support
- PHB pic printinfo
- large QOM rework ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20200127144506.11132-2-clg@kaod.org>
[dwg: Use device_class_set_props()]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-01-27 17:45:05 +03:00
|
|
|
}
|
|
|
|
|
|
|
|
static const TypeInfo pnv_pec_type_info = {
|
|
|
|
.name = TYPE_PNV_PHB4_PEC,
|
|
|
|
.parent = TYPE_DEVICE,
|
|
|
|
.instance_size = sizeof(PnvPhb4PecState),
|
|
|
|
.class_init = pnv_pec_class_init,
|
|
|
|
.class_size = sizeof(PnvPhb4PecClass),
|
|
|
|
.interfaces = (InterfaceInfo[]) {
|
|
|
|
{ TYPE_PNV_XSCOM_INTERFACE },
|
|
|
|
{ }
|
|
|
|
}
|
|
|
|
};
|
|
|
|
|
2022-03-02 08:51:39 +03:00
|
|
|
/*
|
|
|
|
* POWER10 definitions
|
|
|
|
*/
|
|
|
|
|
|
|
|
static uint32_t pnv_phb5_pec_xscom_pci_base(PnvPhb4PecState *pec)
|
|
|
|
{
|
|
|
|
return PNV10_XSCOM_PEC_PCI_BASE + 0x1000000 * pec->index;
|
|
|
|
}
|
|
|
|
|
|
|
|
static uint32_t pnv_phb5_pec_xscom_nest_base(PnvPhb4PecState *pec)
|
|
|
|
{
|
|
|
|
/* index goes down ... */
|
|
|
|
return PNV10_XSCOM_PEC_NEST_BASE - 0x1000000 * pec->index;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* PEC0 -> 3 stacks
|
|
|
|
* PEC1 -> 3 stacks
|
|
|
|
*/
|
|
|
|
static const uint32_t pnv_phb5_pec_num_stacks[] = { 3, 3 };
|
|
|
|
|
|
|
|
static void pnv_phb5_pec_class_init(ObjectClass *klass, void *data)
|
|
|
|
{
|
|
|
|
PnvPhb4PecClass *pecc = PNV_PHB4_PEC_CLASS(klass);
|
|
|
|
static const char compat[] = "ibm,power10-pbcq";
|
|
|
|
static const char stk_compat[] = "ibm,power10-phb-stack";
|
|
|
|
|
|
|
|
pecc->xscom_nest_base = pnv_phb5_pec_xscom_nest_base;
|
|
|
|
pecc->xscom_pci_base = pnv_phb5_pec_xscom_pci_base;
|
|
|
|
pecc->xscom_nest_size = PNV10_XSCOM_PEC_NEST_SIZE;
|
|
|
|
pecc->xscom_pci_size = PNV10_XSCOM_PEC_PCI_SIZE;
|
|
|
|
pecc->compat = compat;
|
|
|
|
pecc->compat_size = sizeof(compat);
|
|
|
|
pecc->stk_compat = stk_compat;
|
|
|
|
pecc->stk_compat_size = sizeof(stk_compat);
|
|
|
|
pecc->version = PNV_PHB5_VERSION;
|
2022-03-14 17:57:17 +03:00
|
|
|
pecc->phb_type = TYPE_PNV_PHB5;
|
2022-03-02 08:51:39 +03:00
|
|
|
pecc->num_phbs = pnv_phb5_pec_num_stacks;
|
|
|
|
pecc->rp_model = TYPE_PNV_PHB5_ROOT_PORT;
|
|
|
|
}
|
|
|
|
|
|
|
|
static const TypeInfo pnv_phb5_pec_type_info = {
|
|
|
|
.name = TYPE_PNV_PHB5_PEC,
|
|
|
|
.parent = TYPE_PNV_PHB4_PEC,
|
|
|
|
.instance_size = sizeof(PnvPhb4PecState),
|
|
|
|
.class_init = pnv_phb5_pec_class_init,
|
|
|
|
.class_size = sizeof(PnvPhb4PecClass),
|
|
|
|
.interfaces = (InterfaceInfo[]) {
|
|
|
|
{ TYPE_PNV_XSCOM_INTERFACE },
|
|
|
|
{ }
|
|
|
|
}
|
|
|
|
};
|
|
|
|
|
ppc/pnv: Add models for POWER9 PHB4 PCIe Host bridge
These changes introduces models for the PCIe Host Bridge (PHB4) of the
POWER9 processor. It includes the PowerBus logic interface (PBCQ),
IOMMU support, a single PCIe Gen.4 Root Complex, and support for MSI
and LSI interrupt sources as found on a POWER9 system using the XIVE
interrupt controller.
POWER9 processor comes with 3 PHB4 PEC (PCI Express Controller) and
each PEC can have several PHBs. By default,
* PEC0 provides 1 PHB (PHB0)
* PEC1 provides 2 PHBs (PHB1 and PHB2)
* PEC2 provides 3 PHBs (PHB3, PHB4 and PHB5)
Each PEC has a set "global" registers and some "per-stack" (per-PHB)
registers. Those are organized in two XSCOM ranges, the "Nest" range
and the "PCI" range, each range contains both some "PEC" registers and
some "per-stack" registers.
No default device layout is provided and PCI devices can be added on
any of the available PCIe Root Port (pcie.0 .. 2 of a Power9 chip)
with address 0x0 as the firwware (skiboot) only accepts a single
device per root port. To run a simple system with a network and a
storage adapters, use a command line options such as :
-device e1000e,netdev=net0,mac=C0:FF:EE:00:00:02,bus=pcie.0,addr=0x0
-netdev bridge,id=net0,helper=/usr/libexec/qemu-bridge-helper,br=virbr0,id=hostnet0
-device megasas,id=scsi0,bus=pcie.1,addr=0x0
-drive file=$disk,if=none,id=drive-scsi0-0-0-0,format=qcow2,cache=none
-device scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=0,drive=drive-scsi0-0-0-0,id=scsi0-0-0-0,bootindex=2
If more are needed, include a bridge.
Multi chip is supported, each chip adding its set of PHB4 controllers
and its PCI busses. The model doesn't emulate the EEH error handling.
This model is not ready for hotplug yet.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[ clg: - numerous cleanups
- commit log
- fix for broken LSI support
- PHB pic printinfo
- large QOM rework ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20200127144506.11132-2-clg@kaod.org>
[dwg: Use device_class_set_props()]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-01-27 17:45:05 +03:00
|
|
|
static void pnv_pec_register_types(void)
|
|
|
|
{
|
|
|
|
type_register_static(&pnv_pec_type_info);
|
2022-03-02 08:51:39 +03:00
|
|
|
type_register_static(&pnv_phb5_pec_type_info);
|
ppc/pnv: Add models for POWER9 PHB4 PCIe Host bridge
These changes introduces models for the PCIe Host Bridge (PHB4) of the
POWER9 processor. It includes the PowerBus logic interface (PBCQ),
IOMMU support, a single PCIe Gen.4 Root Complex, and support for MSI
and LSI interrupt sources as found on a POWER9 system using the XIVE
interrupt controller.
POWER9 processor comes with 3 PHB4 PEC (PCI Express Controller) and
each PEC can have several PHBs. By default,
* PEC0 provides 1 PHB (PHB0)
* PEC1 provides 2 PHBs (PHB1 and PHB2)
* PEC2 provides 3 PHBs (PHB3, PHB4 and PHB5)
Each PEC has a set "global" registers and some "per-stack" (per-PHB)
registers. Those are organized in two XSCOM ranges, the "Nest" range
and the "PCI" range, each range contains both some "PEC" registers and
some "per-stack" registers.
No default device layout is provided and PCI devices can be added on
any of the available PCIe Root Port (pcie.0 .. 2 of a Power9 chip)
with address 0x0 as the firwware (skiboot) only accepts a single
device per root port. To run a simple system with a network and a
storage adapters, use a command line options such as :
-device e1000e,netdev=net0,mac=C0:FF:EE:00:00:02,bus=pcie.0,addr=0x0
-netdev bridge,id=net0,helper=/usr/libexec/qemu-bridge-helper,br=virbr0,id=hostnet0
-device megasas,id=scsi0,bus=pcie.1,addr=0x0
-drive file=$disk,if=none,id=drive-scsi0-0-0-0,format=qcow2,cache=none
-device scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=0,drive=drive-scsi0-0-0-0,id=scsi0-0-0-0,bootindex=2
If more are needed, include a bridge.
Multi chip is supported, each chip adding its set of PHB4 controllers
and its PCI busses. The model doesn't emulate the EEH error handling.
This model is not ready for hotplug yet.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[ clg: - numerous cleanups
- commit log
- fix for broken LSI support
- PHB pic printinfo
- large QOM rework ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20200127144506.11132-2-clg@kaod.org>
[dwg: Use device_class_set_props()]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-01-27 17:45:05 +03:00
|
|
|
}
|
|
|
|
|
|
|
|
type_init(pnv_pec_register_types);
|