ppc/pnv: Add models for POWER9 PHB4 PCIe Host bridge
These changes introduces models for the PCIe Host Bridge (PHB4) of the
POWER9 processor. It includes the PowerBus logic interface (PBCQ),
IOMMU support, a single PCIe Gen.4 Root Complex, and support for MSI
and LSI interrupt sources as found on a POWER9 system using the XIVE
interrupt controller.
POWER9 processor comes with 3 PHB4 PEC (PCI Express Controller) and
each PEC can have several PHBs. By default,
* PEC0 provides 1 PHB (PHB0)
* PEC1 provides 2 PHBs (PHB1 and PHB2)
* PEC2 provides 3 PHBs (PHB3, PHB4 and PHB5)
Each PEC has a set "global" registers and some "per-stack" (per-PHB)
registers. Those are organized in two XSCOM ranges, the "Nest" range
and the "PCI" range, each range contains both some "PEC" registers and
some "per-stack" registers.
No default device layout is provided and PCI devices can be added on
any of the available PCIe Root Port (pcie.0 .. 2 of a Power9 chip)
with address 0x0 as the firwware (skiboot) only accepts a single
device per root port. To run a simple system with a network and a
storage adapters, use a command line options such as :
-device e1000e,netdev=net0,mac=C0:FF:EE:00:00:02,bus=pcie.0,addr=0x0
-netdev bridge,id=net0,helper=/usr/libexec/qemu-bridge-helper,br=virbr0,id=hostnet0
-device megasas,id=scsi0,bus=pcie.1,addr=0x0
-drive file=$disk,if=none,id=drive-scsi0-0-0-0,format=qcow2,cache=none
-device scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=0,drive=drive-scsi0-0-0-0,id=scsi0-0-0-0,bootindex=2
If more are needed, include a bridge.
Multi chip is supported, each chip adding its set of PHB4 controllers
and its PCI busses. The model doesn't emulate the EEH error handling.
This model is not ready for hotplug yet.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[ clg: - numerous cleanups
- commit log
- fix for broken LSI support
- PHB pic printinfo
- large QOM rework ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20200127144506.11132-2-clg@kaod.org>
[dwg: Use device_class_set_props()]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-01-27 17:45:05 +03:00
|
|
|
/*
|
|
|
|
* QEMU PowerPC PowerNV (POWER9) PHB4 model
|
|
|
|
*
|
|
|
|
* Copyright (c) 2018-2020, IBM Corporation.
|
|
|
|
*
|
|
|
|
* This code is licensed under the GPL version 2 or later. See the
|
|
|
|
* COPYING file in the top-level directory.
|
|
|
|
*/
|
|
|
|
#include "qemu/osdep.h"
|
|
|
|
#include "qapi/error.h"
|
|
|
|
#include "qemu-common.h"
|
|
|
|
#include "qemu/log.h"
|
|
|
|
#include "target/ppc/cpu.h"
|
|
|
|
#include "hw/ppc/fdt.h"
|
|
|
|
#include "hw/pci-host/pnv_phb4_regs.h"
|
|
|
|
#include "hw/pci-host/pnv_phb4.h"
|
|
|
|
#include "hw/ppc/pnv_xscom.h"
|
|
|
|
#include "hw/pci/pci_bridge.h"
|
|
|
|
#include "hw/pci/pci_bus.h"
|
|
|
|
#include "hw/ppc/pnv.h"
|
|
|
|
#include "hw/qdev-properties.h"
|
|
|
|
|
|
|
|
#include <libfdt.h>
|
|
|
|
|
|
|
|
#define phb_pec_error(pec, fmt, ...) \
|
|
|
|
qemu_log_mask(LOG_GUEST_ERROR, "phb4_pec[%d:%d]: " fmt "\n", \
|
|
|
|
(pec)->chip_id, (pec)->index, ## __VA_ARGS__)
|
|
|
|
|
|
|
|
|
|
|
|
static uint64_t pnv_pec_nest_xscom_read(void *opaque, hwaddr addr,
|
|
|
|
unsigned size)
|
|
|
|
{
|
|
|
|
PnvPhb4PecState *pec = PNV_PHB4_PEC(opaque);
|
|
|
|
uint32_t reg = addr >> 3;
|
|
|
|
|
|
|
|
/* TODO: add list of allowed registers and error out if not */
|
|
|
|
return pec->nest_regs[reg];
|
|
|
|
}
|
|
|
|
|
|
|
|
static void pnv_pec_nest_xscom_write(void *opaque, hwaddr addr,
|
|
|
|
uint64_t val, unsigned size)
|
|
|
|
{
|
|
|
|
PnvPhb4PecState *pec = PNV_PHB4_PEC(opaque);
|
|
|
|
uint32_t reg = addr >> 3;
|
|
|
|
|
|
|
|
switch (reg) {
|
|
|
|
case PEC_NEST_PBCQ_HW_CONFIG:
|
|
|
|
case PEC_NEST_DROP_PRIO_CTRL:
|
|
|
|
case PEC_NEST_PBCQ_ERR_INJECT:
|
|
|
|
case PEC_NEST_PCI_NEST_CLK_TRACE_CTL:
|
|
|
|
case PEC_NEST_PBCQ_PMON_CTRL:
|
|
|
|
case PEC_NEST_PBCQ_PBUS_ADDR_EXT:
|
|
|
|
case PEC_NEST_PBCQ_PRED_VEC_TIMEOUT:
|
|
|
|
case PEC_NEST_CAPP_CTRL:
|
|
|
|
case PEC_NEST_PBCQ_READ_STK_OVR:
|
|
|
|
case PEC_NEST_PBCQ_WRITE_STK_OVR:
|
|
|
|
case PEC_NEST_PBCQ_STORE_STK_OVR:
|
|
|
|
case PEC_NEST_PBCQ_RETRY_BKOFF_CTRL:
|
|
|
|
pec->nest_regs[reg] = val;
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
phb_pec_error(pec, "%s @0x%"HWADDR_PRIx"=%"PRIx64"\n", __func__,
|
|
|
|
addr, val);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static const MemoryRegionOps pnv_pec_nest_xscom_ops = {
|
|
|
|
.read = pnv_pec_nest_xscom_read,
|
|
|
|
.write = pnv_pec_nest_xscom_write,
|
|
|
|
.valid.min_access_size = 8,
|
|
|
|
.valid.max_access_size = 8,
|
|
|
|
.impl.min_access_size = 8,
|
|
|
|
.impl.max_access_size = 8,
|
|
|
|
.endianness = DEVICE_BIG_ENDIAN,
|
|
|
|
};
|
|
|
|
|
|
|
|
static uint64_t pnv_pec_pci_xscom_read(void *opaque, hwaddr addr,
|
|
|
|
unsigned size)
|
|
|
|
{
|
|
|
|
PnvPhb4PecState *pec = PNV_PHB4_PEC(opaque);
|
|
|
|
uint32_t reg = addr >> 3;
|
|
|
|
|
|
|
|
/* TODO: add list of allowed registers and error out if not */
|
|
|
|
return pec->pci_regs[reg];
|
|
|
|
}
|
|
|
|
|
|
|
|
static void pnv_pec_pci_xscom_write(void *opaque, hwaddr addr,
|
|
|
|
uint64_t val, unsigned size)
|
|
|
|
{
|
|
|
|
PnvPhb4PecState *pec = PNV_PHB4_PEC(opaque);
|
|
|
|
uint32_t reg = addr >> 3;
|
|
|
|
|
|
|
|
switch (reg) {
|
|
|
|
case PEC_PCI_PBAIB_HW_CONFIG:
|
|
|
|
case PEC_PCI_PBAIB_READ_STK_OVR:
|
|
|
|
pec->pci_regs[reg] = val;
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
phb_pec_error(pec, "%s @0x%"HWADDR_PRIx"=%"PRIx64"\n", __func__,
|
|
|
|
addr, val);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static const MemoryRegionOps pnv_pec_pci_xscom_ops = {
|
|
|
|
.read = pnv_pec_pci_xscom_read,
|
|
|
|
.write = pnv_pec_pci_xscom_write,
|
|
|
|
.valid.min_access_size = 8,
|
|
|
|
.valid.max_access_size = 8,
|
|
|
|
.impl.min_access_size = 8,
|
|
|
|
.impl.max_access_size = 8,
|
|
|
|
.endianness = DEVICE_BIG_ENDIAN,
|
|
|
|
};
|
|
|
|
|
|
|
|
static uint64_t pnv_pec_stk_nest_xscom_read(void *opaque, hwaddr addr,
|
|
|
|
unsigned size)
|
|
|
|
{
|
|
|
|
PnvPhb4PecStack *stack = PNV_PHB4_PEC_STACK(opaque);
|
|
|
|
uint32_t reg = addr >> 3;
|
|
|
|
|
|
|
|
/* TODO: add list of allowed registers and error out if not */
|
|
|
|
return stack->nest_regs[reg];
|
|
|
|
}
|
|
|
|
|
|
|
|
static void pnv_pec_stk_update_map(PnvPhb4PecStack *stack)
|
|
|
|
{
|
|
|
|
PnvPhb4PecState *pec = stack->pec;
|
|
|
|
MemoryRegion *sysmem = pec->system_memory;
|
|
|
|
uint64_t bar_en = stack->nest_regs[PEC_NEST_STK_BAR_EN];
|
|
|
|
uint64_t bar, mask, size;
|
|
|
|
char name[64];
|
|
|
|
|
|
|
|
/*
|
|
|
|
* NOTE: This will really not work well if those are remapped
|
|
|
|
* after the PHB has created its sub regions. We could do better
|
|
|
|
* if we had a way to resize regions but we don't really care
|
|
|
|
* that much in practice as the stuff below really only happens
|
|
|
|
* once early during boot
|
|
|
|
*/
|
|
|
|
|
|
|
|
/* Handle unmaps */
|
|
|
|
if (memory_region_is_mapped(&stack->mmbar0) &&
|
|
|
|
!(bar_en & PEC_NEST_STK_BAR_EN_MMIO0)) {
|
|
|
|
memory_region_del_subregion(sysmem, &stack->mmbar0);
|
|
|
|
}
|
|
|
|
if (memory_region_is_mapped(&stack->mmbar1) &&
|
|
|
|
!(bar_en & PEC_NEST_STK_BAR_EN_MMIO1)) {
|
|
|
|
memory_region_del_subregion(sysmem, &stack->mmbar1);
|
|
|
|
}
|
|
|
|
if (memory_region_is_mapped(&stack->phbbar) &&
|
|
|
|
!(bar_en & PEC_NEST_STK_BAR_EN_PHB)) {
|
|
|
|
memory_region_del_subregion(sysmem, &stack->phbbar);
|
|
|
|
}
|
|
|
|
if (memory_region_is_mapped(&stack->intbar) &&
|
|
|
|
!(bar_en & PEC_NEST_STK_BAR_EN_INT)) {
|
|
|
|
memory_region_del_subregion(sysmem, &stack->intbar);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Update PHB */
|
|
|
|
pnv_phb4_update_regions(stack);
|
|
|
|
|
|
|
|
/* Handle maps */
|
|
|
|
if (!memory_region_is_mapped(&stack->mmbar0) &&
|
|
|
|
(bar_en & PEC_NEST_STK_BAR_EN_MMIO0)) {
|
|
|
|
bar = stack->nest_regs[PEC_NEST_STK_MMIO_BAR0] >> 8;
|
|
|
|
mask = stack->nest_regs[PEC_NEST_STK_MMIO_BAR0_MASK];
|
|
|
|
size = ((~mask) >> 8) + 1;
|
|
|
|
snprintf(name, sizeof(name), "pec-%d.%d-stack-%d-mmio0",
|
|
|
|
pec->chip_id, pec->index, stack->stack_no);
|
|
|
|
memory_region_init(&stack->mmbar0, OBJECT(stack), name, size);
|
|
|
|
memory_region_add_subregion(sysmem, bar, &stack->mmbar0);
|
|
|
|
stack->mmio0_base = bar;
|
|
|
|
stack->mmio0_size = size;
|
|
|
|
}
|
|
|
|
if (!memory_region_is_mapped(&stack->mmbar1) &&
|
|
|
|
(bar_en & PEC_NEST_STK_BAR_EN_MMIO1)) {
|
|
|
|
bar = stack->nest_regs[PEC_NEST_STK_MMIO_BAR1] >> 8;
|
|
|
|
mask = stack->nest_regs[PEC_NEST_STK_MMIO_BAR1_MASK];
|
|
|
|
size = ((~mask) >> 8) + 1;
|
|
|
|
snprintf(name, sizeof(name), "pec-%d.%d-stack-%d-mmio1",
|
|
|
|
pec->chip_id, pec->index, stack->stack_no);
|
|
|
|
memory_region_init(&stack->mmbar1, OBJECT(stack), name, size);
|
|
|
|
memory_region_add_subregion(sysmem, bar, &stack->mmbar1);
|
|
|
|
stack->mmio1_base = bar;
|
|
|
|
stack->mmio1_size = size;
|
|
|
|
}
|
|
|
|
if (!memory_region_is_mapped(&stack->phbbar) &&
|
|
|
|
(bar_en & PEC_NEST_STK_BAR_EN_PHB)) {
|
|
|
|
bar = stack->nest_regs[PEC_NEST_STK_PHB_REGS_BAR] >> 8;
|
|
|
|
size = PNV_PHB4_NUM_REGS << 3;
|
|
|
|
snprintf(name, sizeof(name), "pec-%d.%d-stack-%d-phb",
|
|
|
|
pec->chip_id, pec->index, stack->stack_no);
|
|
|
|
memory_region_init(&stack->phbbar, OBJECT(stack), name, size);
|
|
|
|
memory_region_add_subregion(sysmem, bar, &stack->phbbar);
|
|
|
|
}
|
|
|
|
if (!memory_region_is_mapped(&stack->intbar) &&
|
|
|
|
(bar_en & PEC_NEST_STK_BAR_EN_INT)) {
|
|
|
|
bar = stack->nest_regs[PEC_NEST_STK_INT_BAR] >> 8;
|
|
|
|
size = PNV_PHB4_MAX_INTs << 16;
|
|
|
|
snprintf(name, sizeof(name), "pec-%d.%d-stack-%d-int",
|
|
|
|
stack->pec->chip_id, stack->pec->index, stack->stack_no);
|
|
|
|
memory_region_init(&stack->intbar, OBJECT(stack), name, size);
|
|
|
|
memory_region_add_subregion(sysmem, bar, &stack->intbar);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Update PHB */
|
|
|
|
pnv_phb4_update_regions(stack);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void pnv_pec_stk_nest_xscom_write(void *opaque, hwaddr addr,
|
|
|
|
uint64_t val, unsigned size)
|
|
|
|
{
|
|
|
|
PnvPhb4PecStack *stack = PNV_PHB4_PEC_STACK(opaque);
|
|
|
|
PnvPhb4PecState *pec = stack->pec;
|
|
|
|
uint32_t reg = addr >> 3;
|
|
|
|
|
|
|
|
switch (reg) {
|
|
|
|
case PEC_NEST_STK_PCI_NEST_FIR:
|
|
|
|
stack->nest_regs[PEC_NEST_STK_PCI_NEST_FIR] = val;
|
|
|
|
break;
|
|
|
|
case PEC_NEST_STK_PCI_NEST_FIR_CLR:
|
|
|
|
stack->nest_regs[PEC_NEST_STK_PCI_NEST_FIR] &= val;
|
|
|
|
break;
|
|
|
|
case PEC_NEST_STK_PCI_NEST_FIR_SET:
|
|
|
|
stack->nest_regs[PEC_NEST_STK_PCI_NEST_FIR] |= val;
|
|
|
|
break;
|
|
|
|
case PEC_NEST_STK_PCI_NEST_FIR_MSK:
|
|
|
|
stack->nest_regs[PEC_NEST_STK_PCI_NEST_FIR_MSK] = val;
|
|
|
|
break;
|
|
|
|
case PEC_NEST_STK_PCI_NEST_FIR_MSKC:
|
|
|
|
stack->nest_regs[PEC_NEST_STK_PCI_NEST_FIR_MSK] &= val;
|
|
|
|
break;
|
|
|
|
case PEC_NEST_STK_PCI_NEST_FIR_MSKS:
|
|
|
|
stack->nest_regs[PEC_NEST_STK_PCI_NEST_FIR_MSK] |= val;
|
|
|
|
break;
|
|
|
|
case PEC_NEST_STK_PCI_NEST_FIR_ACT0:
|
|
|
|
case PEC_NEST_STK_PCI_NEST_FIR_ACT1:
|
|
|
|
stack->nest_regs[reg] = val;
|
|
|
|
break;
|
|
|
|
case PEC_NEST_STK_PCI_NEST_FIR_WOF:
|
|
|
|
stack->nest_regs[reg] = 0;
|
|
|
|
break;
|
|
|
|
case PEC_NEST_STK_ERR_REPORT_0:
|
|
|
|
case PEC_NEST_STK_ERR_REPORT_1:
|
|
|
|
case PEC_NEST_STK_PBCQ_GNRL_STATUS:
|
|
|
|
/* Flag error ? */
|
|
|
|
break;
|
|
|
|
case PEC_NEST_STK_PBCQ_MODE:
|
|
|
|
stack->nest_regs[reg] = val & 0xff00000000000000ull;
|
|
|
|
break;
|
|
|
|
case PEC_NEST_STK_MMIO_BAR0:
|
|
|
|
case PEC_NEST_STK_MMIO_BAR0_MASK:
|
|
|
|
case PEC_NEST_STK_MMIO_BAR1:
|
|
|
|
case PEC_NEST_STK_MMIO_BAR1_MASK:
|
|
|
|
if (stack->nest_regs[PEC_NEST_STK_BAR_EN] &
|
|
|
|
(PEC_NEST_STK_BAR_EN_MMIO0 |
|
|
|
|
PEC_NEST_STK_BAR_EN_MMIO1)) {
|
|
|
|
phb_pec_error(pec, "Changing enabled BAR unsupported\n");
|
|
|
|
}
|
|
|
|
stack->nest_regs[reg] = val & 0xffffffffff000000ull;
|
|
|
|
break;
|
|
|
|
case PEC_NEST_STK_PHB_REGS_BAR:
|
|
|
|
if (stack->nest_regs[PEC_NEST_STK_BAR_EN] & PEC_NEST_STK_BAR_EN_PHB) {
|
|
|
|
phb_pec_error(pec, "Changing enabled BAR unsupported\n");
|
|
|
|
}
|
|
|
|
stack->nest_regs[reg] = val & 0xffffffffffc00000ull;
|
|
|
|
break;
|
|
|
|
case PEC_NEST_STK_INT_BAR:
|
|
|
|
if (stack->nest_regs[PEC_NEST_STK_BAR_EN] & PEC_NEST_STK_BAR_EN_INT) {
|
|
|
|
phb_pec_error(pec, "Changing enabled BAR unsupported\n");
|
|
|
|
}
|
|
|
|
stack->nest_regs[reg] = val & 0xfffffff000000000ull;
|
|
|
|
break;
|
|
|
|
case PEC_NEST_STK_BAR_EN:
|
|
|
|
stack->nest_regs[reg] = val & 0xf000000000000000ull;
|
|
|
|
pnv_pec_stk_update_map(stack);
|
|
|
|
break;
|
|
|
|
case PEC_NEST_STK_DATA_FRZ_TYPE:
|
|
|
|
case PEC_NEST_STK_PBCQ_TUN_BAR:
|
|
|
|
/* Not used for now */
|
|
|
|
stack->nest_regs[reg] = val;
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
qemu_log_mask(LOG_UNIMP, "phb4_pec: nest_xscom_write 0x%"HWADDR_PRIx
|
|
|
|
"=%"PRIx64"\n", addr, val);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static const MemoryRegionOps pnv_pec_stk_nest_xscom_ops = {
|
|
|
|
.read = pnv_pec_stk_nest_xscom_read,
|
|
|
|
.write = pnv_pec_stk_nest_xscom_write,
|
|
|
|
.valid.min_access_size = 8,
|
|
|
|
.valid.max_access_size = 8,
|
|
|
|
.impl.min_access_size = 8,
|
|
|
|
.impl.max_access_size = 8,
|
|
|
|
.endianness = DEVICE_BIG_ENDIAN,
|
|
|
|
};
|
|
|
|
|
|
|
|
static uint64_t pnv_pec_stk_pci_xscom_read(void *opaque, hwaddr addr,
|
|
|
|
unsigned size)
|
|
|
|
{
|
|
|
|
PnvPhb4PecStack *stack = PNV_PHB4_PEC_STACK(opaque);
|
|
|
|
uint32_t reg = addr >> 3;
|
|
|
|
|
|
|
|
/* TODO: add list of allowed registers and error out if not */
|
|
|
|
return stack->pci_regs[reg];
|
|
|
|
}
|
|
|
|
|
|
|
|
static void pnv_pec_stk_pci_xscom_write(void *opaque, hwaddr addr,
|
|
|
|
uint64_t val, unsigned size)
|
|
|
|
{
|
|
|
|
PnvPhb4PecStack *stack = PNV_PHB4_PEC_STACK(opaque);
|
|
|
|
uint32_t reg = addr >> 3;
|
|
|
|
|
|
|
|
switch (reg) {
|
|
|
|
case PEC_PCI_STK_PCI_FIR:
|
|
|
|
stack->nest_regs[reg] = val;
|
|
|
|
break;
|
|
|
|
case PEC_PCI_STK_PCI_FIR_CLR:
|
|
|
|
stack->nest_regs[PEC_PCI_STK_PCI_FIR] &= val;
|
|
|
|
break;
|
|
|
|
case PEC_PCI_STK_PCI_FIR_SET:
|
|
|
|
stack->nest_regs[PEC_PCI_STK_PCI_FIR] |= val;
|
|
|
|
break;
|
|
|
|
case PEC_PCI_STK_PCI_FIR_MSK:
|
|
|
|
stack->nest_regs[reg] = val;
|
|
|
|
break;
|
|
|
|
case PEC_PCI_STK_PCI_FIR_MSKC:
|
|
|
|
stack->nest_regs[PEC_PCI_STK_PCI_FIR_MSK] &= val;
|
|
|
|
break;
|
|
|
|
case PEC_PCI_STK_PCI_FIR_MSKS:
|
|
|
|
stack->nest_regs[PEC_PCI_STK_PCI_FIR_MSK] |= val;
|
|
|
|
break;
|
|
|
|
case PEC_PCI_STK_PCI_FIR_ACT0:
|
|
|
|
case PEC_PCI_STK_PCI_FIR_ACT1:
|
|
|
|
stack->nest_regs[reg] = val;
|
|
|
|
break;
|
|
|
|
case PEC_PCI_STK_PCI_FIR_WOF:
|
|
|
|
stack->nest_regs[reg] = 0;
|
|
|
|
break;
|
|
|
|
case PEC_PCI_STK_ETU_RESET:
|
|
|
|
stack->nest_regs[reg] = val & 0x8000000000000000ull;
|
|
|
|
/* TODO: Implement reset */
|
|
|
|
break;
|
|
|
|
case PEC_PCI_STK_PBAIB_ERR_REPORT:
|
|
|
|
break;
|
|
|
|
case PEC_PCI_STK_PBAIB_TX_CMD_CRED:
|
|
|
|
case PEC_PCI_STK_PBAIB_TX_DAT_CRED:
|
|
|
|
stack->nest_regs[reg] = val;
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
qemu_log_mask(LOG_UNIMP, "phb4_pec_stk: pci_xscom_write 0x%"HWADDR_PRIx
|
|
|
|
"=%"PRIx64"\n", addr, val);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static const MemoryRegionOps pnv_pec_stk_pci_xscom_ops = {
|
|
|
|
.read = pnv_pec_stk_pci_xscom_read,
|
|
|
|
.write = pnv_pec_stk_pci_xscom_write,
|
|
|
|
.valid.min_access_size = 8,
|
|
|
|
.valid.max_access_size = 8,
|
|
|
|
.impl.min_access_size = 8,
|
|
|
|
.impl.max_access_size = 8,
|
|
|
|
.endianness = DEVICE_BIG_ENDIAN,
|
|
|
|
};
|
|
|
|
|
|
|
|
static void pnv_pec_instance_init(Object *obj)
|
|
|
|
{
|
|
|
|
PnvPhb4PecState *pec = PNV_PHB4_PEC(obj);
|
|
|
|
int i;
|
|
|
|
|
|
|
|
for (i = 0; i < PHB4_PEC_MAX_STACKS; i++) {
|
|
|
|
object_initialize_child(obj, "stack[*]", &pec->stacks[i],
|
qom: Less verbose object_initialize_child()
All users of object_initialize_child() pass the obvious child size
argument. Almost all pass &error_abort and no properties. Tiresome.
Rename object_initialize_child() to
object_initialize_child_with_props() to free the name. New
convenience wrapper object_initialize_child() automates the size
argument, and passes &error_abort and no properties.
Rename object_initialize_childv() to
object_initialize_child_with_propsv() for consistency.
Convert callers with this Coccinelle script:
@@
expression parent, propname, type;
expression child, size;
symbol error_abort;
@@
- object_initialize_child(parent, propname, OBJECT(child), size, type, &error_abort, NULL)
+ object_initialize_child(parent, propname, child, size, type, &error_abort, NULL)
@@
expression parent, propname, type;
expression child;
symbol error_abort;
@@
- object_initialize_child(parent, propname, child, sizeof(*child), type, &error_abort, NULL)
+ object_initialize_child(parent, propname, child, type)
@@
expression parent, propname, type;
expression child;
symbol error_abort;
@@
- object_initialize_child(parent, propname, &child, sizeof(child), type, &error_abort, NULL)
+ object_initialize_child(parent, propname, &child, type)
@@
expression parent, propname, type;
expression child, size, err;
expression list props;
@@
- object_initialize_child(parent, propname, child, size, type, err, props)
+ object_initialize_child_with_props(parent, propname, child, size, type, err, props)
Note that Coccinelle chokes on ARMSSE typedef vs. macro in
hw/arm/armsse.c. Worked around by temporarily renaming the macro for
the spatch run.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
[Rebased: machine opentitan is new (commit fe0fe4735e7)]
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200610053247.1583243-37-armbru@redhat.com>
2020-06-10 08:32:25 +03:00
|
|
|
TYPE_PNV_PHB4_PEC_STACK);
|
ppc/pnv: Add models for POWER9 PHB4 PCIe Host bridge
These changes introduces models for the PCIe Host Bridge (PHB4) of the
POWER9 processor. It includes the PowerBus logic interface (PBCQ),
IOMMU support, a single PCIe Gen.4 Root Complex, and support for MSI
and LSI interrupt sources as found on a POWER9 system using the XIVE
interrupt controller.
POWER9 processor comes with 3 PHB4 PEC (PCI Express Controller) and
each PEC can have several PHBs. By default,
* PEC0 provides 1 PHB (PHB0)
* PEC1 provides 2 PHBs (PHB1 and PHB2)
* PEC2 provides 3 PHBs (PHB3, PHB4 and PHB5)
Each PEC has a set "global" registers and some "per-stack" (per-PHB)
registers. Those are organized in two XSCOM ranges, the "Nest" range
and the "PCI" range, each range contains both some "PEC" registers and
some "per-stack" registers.
No default device layout is provided and PCI devices can be added on
any of the available PCIe Root Port (pcie.0 .. 2 of a Power9 chip)
with address 0x0 as the firwware (skiboot) only accepts a single
device per root port. To run a simple system with a network and a
storage adapters, use a command line options such as :
-device e1000e,netdev=net0,mac=C0:FF:EE:00:00:02,bus=pcie.0,addr=0x0
-netdev bridge,id=net0,helper=/usr/libexec/qemu-bridge-helper,br=virbr0,id=hostnet0
-device megasas,id=scsi0,bus=pcie.1,addr=0x0
-drive file=$disk,if=none,id=drive-scsi0-0-0-0,format=qcow2,cache=none
-device scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=0,drive=drive-scsi0-0-0-0,id=scsi0-0-0-0,bootindex=2
If more are needed, include a bridge.
Multi chip is supported, each chip adding its set of PHB4 controllers
and its PCI busses. The model doesn't emulate the EEH error handling.
This model is not ready for hotplug yet.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[ clg: - numerous cleanups
- commit log
- fix for broken LSI support
- PHB pic printinfo
- large QOM rework ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20200127144506.11132-2-clg@kaod.org>
[dwg: Use device_class_set_props()]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-01-27 17:45:05 +03:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static void pnv_pec_realize(DeviceState *dev, Error **errp)
|
|
|
|
{
|
|
|
|
PnvPhb4PecState *pec = PNV_PHB4_PEC(dev);
|
|
|
|
char name[64];
|
|
|
|
int i;
|
|
|
|
|
|
|
|
assert(pec->system_memory);
|
|
|
|
|
2021-12-17 19:57:19 +03:00
|
|
|
if (pec->index >= PNV_CHIP_GET_CLASS(pec->chip)->num_pecs) {
|
|
|
|
error_setg(errp, "invalid PEC index: %d", pec->index);
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
ppc/pnv: Add models for POWER9 PHB4 PCIe Host bridge
These changes introduces models for the PCIe Host Bridge (PHB4) of the
POWER9 processor. It includes the PowerBus logic interface (PBCQ),
IOMMU support, a single PCIe Gen.4 Root Complex, and support for MSI
and LSI interrupt sources as found on a POWER9 system using the XIVE
interrupt controller.
POWER9 processor comes with 3 PHB4 PEC (PCI Express Controller) and
each PEC can have several PHBs. By default,
* PEC0 provides 1 PHB (PHB0)
* PEC1 provides 2 PHBs (PHB1 and PHB2)
* PEC2 provides 3 PHBs (PHB3, PHB4 and PHB5)
Each PEC has a set "global" registers and some "per-stack" (per-PHB)
registers. Those are organized in two XSCOM ranges, the "Nest" range
and the "PCI" range, each range contains both some "PEC" registers and
some "per-stack" registers.
No default device layout is provided and PCI devices can be added on
any of the available PCIe Root Port (pcie.0 .. 2 of a Power9 chip)
with address 0x0 as the firwware (skiboot) only accepts a single
device per root port. To run a simple system with a network and a
storage adapters, use a command line options such as :
-device e1000e,netdev=net0,mac=C0:FF:EE:00:00:02,bus=pcie.0,addr=0x0
-netdev bridge,id=net0,helper=/usr/libexec/qemu-bridge-helper,br=virbr0,id=hostnet0
-device megasas,id=scsi0,bus=pcie.1,addr=0x0
-drive file=$disk,if=none,id=drive-scsi0-0-0-0,format=qcow2,cache=none
-device scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=0,drive=drive-scsi0-0-0-0,id=scsi0-0-0-0,bootindex=2
If more are needed, include a bridge.
Multi chip is supported, each chip adding its set of PHB4 controllers
and its PCI busses. The model doesn't emulate the EEH error handling.
This model is not ready for hotplug yet.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[ clg: - numerous cleanups
- commit log
- fix for broken LSI support
- PHB pic printinfo
- large QOM rework ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20200127144506.11132-2-clg@kaod.org>
[dwg: Use device_class_set_props()]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-01-27 17:45:05 +03:00
|
|
|
/* Create stacks */
|
|
|
|
for (i = 0; i < pec->num_stacks; i++) {
|
|
|
|
PnvPhb4PecStack *stack = &pec->stacks[i];
|
|
|
|
Object *stk_obj = OBJECT(stack);
|
|
|
|
|
qom: Put name parameter before value / visitor parameter
The object_property_set_FOO() setters take property name and value in
an unusual order:
void object_property_set_FOO(Object *obj, FOO_TYPE value,
const char *name, Error **errp)
Having to pass value before name feels grating. Swap them.
Same for object_property_set(), object_property_get(), and
object_property_parse().
Convert callers with this Coccinelle script:
@@
identifier fun = {
object_property_get, object_property_parse, object_property_set_str,
object_property_set_link, object_property_set_bool,
object_property_set_int, object_property_set_uint, object_property_set,
object_property_set_qobject
};
expression obj, v, name, errp;
@@
- fun(obj, v, name, errp)
+ fun(obj, name, v, errp)
Chokes on hw/arm/musicpal.c's lcd_refresh() with the unhelpful error
message "no position information". Convert that one manually.
Fails to convert hw/arm/armsse.c, because Coccinelle gets confused by
ARMSSE being used both as typedef and function-like macro there.
Convert manually.
Fails to convert hw/rx/rx-gdbsim.c, because Coccinelle gets confused
by RXCPU being used both as typedef and function-like macro there.
Convert manually. The other files using RXCPU that way don't need
conversion.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200707160613.848843-27-armbru@redhat.com>
[Straightforwad conflict with commit 2336172d9b "audio: set default
value for pcspk.iobase property" resolved]
2020-07-07 19:05:54 +03:00
|
|
|
object_property_set_int(stk_obj, "stack-no", i, &error_abort);
|
|
|
|
object_property_set_link(stk_obj, "pec", OBJECT(pec), &error_abort);
|
error: Eliminate error_propagate() with Coccinelle, part 1
When all we do with an Error we receive into a local variable is
propagating to somewhere else, we can just as well receive it there
right away. Convert
if (!foo(..., &err)) {
...
error_propagate(errp, err);
...
return ...
}
to
if (!foo(..., errp)) {
...
...
return ...
}
where nothing else needs @err. Coccinelle script:
@rule1 forall@
identifier fun, err, errp, lbl;
expression list args, args2;
binary operator op;
constant c1, c2;
symbol false;
@@
if (
(
- fun(args, &err, args2)
+ fun(args, errp, args2)
|
- !fun(args, &err, args2)
+ !fun(args, errp, args2)
|
- fun(args, &err, args2) op c1
+ fun(args, errp, args2) op c1
)
)
{
... when != err
when != lbl:
when strict
- error_propagate(errp, err);
... when != err
(
return;
|
return c2;
|
return false;
)
}
@rule2 forall@
identifier fun, err, errp, lbl;
expression list args, args2;
expression var;
binary operator op;
constant c1, c2;
symbol false;
@@
- var = fun(args, &err, args2);
+ var = fun(args, errp, args2);
... when != err
if (
(
var
|
!var
|
var op c1
)
)
{
... when != err
when != lbl:
when strict
- error_propagate(errp, err);
... when != err
(
return;
|
return c2;
|
return false;
|
return var;
)
}
@depends on rule1 || rule2@
identifier err;
@@
- Error *err = NULL;
... when != err
Not exactly elegant, I'm afraid.
The "when != lbl:" is necessary to avoid transforming
if (fun(args, &err)) {
goto out
}
...
out:
error_propagate(errp, err);
even though other paths to label out still need the error_propagate().
For an actual example, see sclp_realize().
Without the "when strict", Coccinelle transforms vfio_msix_setup(),
incorrectly. I don't know what exactly "when strict" does, only that
it helps here.
The match of return is narrower than what I want, but I can't figure
out how to express "return where the operand doesn't use @err". For
an example where it's too narrow, see vfio_intx_enable().
Silently fails to convert hw/arm/armsse.c, because Coccinelle gets
confused by ARMSSE being used both as typedef and function-like macro
there. Converted manually.
Line breaks tidied up manually. One nested declaration of @local_err
deleted manually. Preexisting unwanted blank line dropped in
hw/riscv/sifive_e.c.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200707160613.848843-35-armbru@redhat.com>
2020-07-07 19:06:02 +03:00
|
|
|
if (!qdev_realize(DEVICE(stk_obj), NULL, errp)) {
|
ppc/pnv: Add models for POWER9 PHB4 PCIe Host bridge
These changes introduces models for the PCIe Host Bridge (PHB4) of the
POWER9 processor. It includes the PowerBus logic interface (PBCQ),
IOMMU support, a single PCIe Gen.4 Root Complex, and support for MSI
and LSI interrupt sources as found on a POWER9 system using the XIVE
interrupt controller.
POWER9 processor comes with 3 PHB4 PEC (PCI Express Controller) and
each PEC can have several PHBs. By default,
* PEC0 provides 1 PHB (PHB0)
* PEC1 provides 2 PHBs (PHB1 and PHB2)
* PEC2 provides 3 PHBs (PHB3, PHB4 and PHB5)
Each PEC has a set "global" registers and some "per-stack" (per-PHB)
registers. Those are organized in two XSCOM ranges, the "Nest" range
and the "PCI" range, each range contains both some "PEC" registers and
some "per-stack" registers.
No default device layout is provided and PCI devices can be added on
any of the available PCIe Root Port (pcie.0 .. 2 of a Power9 chip)
with address 0x0 as the firwware (skiboot) only accepts a single
device per root port. To run a simple system with a network and a
storage adapters, use a command line options such as :
-device e1000e,netdev=net0,mac=C0:FF:EE:00:00:02,bus=pcie.0,addr=0x0
-netdev bridge,id=net0,helper=/usr/libexec/qemu-bridge-helper,br=virbr0,id=hostnet0
-device megasas,id=scsi0,bus=pcie.1,addr=0x0
-drive file=$disk,if=none,id=drive-scsi0-0-0-0,format=qcow2,cache=none
-device scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=0,drive=drive-scsi0-0-0-0,id=scsi0-0-0-0,bootindex=2
If more are needed, include a bridge.
Multi chip is supported, each chip adding its set of PHB4 controllers
and its PCI busses. The model doesn't emulate the EEH error handling.
This model is not ready for hotplug yet.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[ clg: - numerous cleanups
- commit log
- fix for broken LSI support
- PHB pic printinfo
- large QOM rework ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20200127144506.11132-2-clg@kaod.org>
[dwg: Use device_class_set_props()]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-01-27 17:45:05 +03:00
|
|
|
return;
|
|
|
|
}
|
|
|
|
}
|
2020-06-09 15:23:26 +03:00
|
|
|
for (; i < PHB4_PEC_MAX_STACKS; i++) {
|
|
|
|
object_unparent(OBJECT(&pec->stacks[i]));
|
|
|
|
}
|
ppc/pnv: Add models for POWER9 PHB4 PCIe Host bridge
These changes introduces models for the PCIe Host Bridge (PHB4) of the
POWER9 processor. It includes the PowerBus logic interface (PBCQ),
IOMMU support, a single PCIe Gen.4 Root Complex, and support for MSI
and LSI interrupt sources as found on a POWER9 system using the XIVE
interrupt controller.
POWER9 processor comes with 3 PHB4 PEC (PCI Express Controller) and
each PEC can have several PHBs. By default,
* PEC0 provides 1 PHB (PHB0)
* PEC1 provides 2 PHBs (PHB1 and PHB2)
* PEC2 provides 3 PHBs (PHB3, PHB4 and PHB5)
Each PEC has a set "global" registers and some "per-stack" (per-PHB)
registers. Those are organized in two XSCOM ranges, the "Nest" range
and the "PCI" range, each range contains both some "PEC" registers and
some "per-stack" registers.
No default device layout is provided and PCI devices can be added on
any of the available PCIe Root Port (pcie.0 .. 2 of a Power9 chip)
with address 0x0 as the firwware (skiboot) only accepts a single
device per root port. To run a simple system with a network and a
storage adapters, use a command line options such as :
-device e1000e,netdev=net0,mac=C0:FF:EE:00:00:02,bus=pcie.0,addr=0x0
-netdev bridge,id=net0,helper=/usr/libexec/qemu-bridge-helper,br=virbr0,id=hostnet0
-device megasas,id=scsi0,bus=pcie.1,addr=0x0
-drive file=$disk,if=none,id=drive-scsi0-0-0-0,format=qcow2,cache=none
-device scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=0,drive=drive-scsi0-0-0-0,id=scsi0-0-0-0,bootindex=2
If more are needed, include a bridge.
Multi chip is supported, each chip adding its set of PHB4 controllers
and its PCI busses. The model doesn't emulate the EEH error handling.
This model is not ready for hotplug yet.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[ clg: - numerous cleanups
- commit log
- fix for broken LSI support
- PHB pic printinfo
- large QOM rework ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20200127144506.11132-2-clg@kaod.org>
[dwg: Use device_class_set_props()]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-01-27 17:45:05 +03:00
|
|
|
|
|
|
|
/* Initialize the XSCOM regions for the PEC registers */
|
|
|
|
snprintf(name, sizeof(name), "xscom-pec-%d.%d-nest", pec->chip_id,
|
|
|
|
pec->index);
|
|
|
|
pnv_xscom_region_init(&pec->nest_regs_mr, OBJECT(dev),
|
|
|
|
&pnv_pec_nest_xscom_ops, pec, name,
|
|
|
|
PHB4_PEC_NEST_REGS_COUNT);
|
|
|
|
|
|
|
|
snprintf(name, sizeof(name), "xscom-pec-%d.%d-pci", pec->chip_id,
|
|
|
|
pec->index);
|
|
|
|
pnv_xscom_region_init(&pec->pci_regs_mr, OBJECT(dev),
|
|
|
|
&pnv_pec_pci_xscom_ops, pec, name,
|
|
|
|
PHB4_PEC_PCI_REGS_COUNT);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int pnv_pec_dt_xscom(PnvXScomInterface *dev, void *fdt,
|
|
|
|
int xscom_offset)
|
|
|
|
{
|
|
|
|
PnvPhb4PecState *pec = PNV_PHB4_PEC(dev);
|
|
|
|
PnvPhb4PecClass *pecc = PNV_PHB4_PEC_GET_CLASS(dev);
|
|
|
|
uint32_t nbase = pecc->xscom_nest_base(pec);
|
|
|
|
uint32_t pbase = pecc->xscom_pci_base(pec);
|
|
|
|
int offset, i;
|
|
|
|
char *name;
|
|
|
|
uint32_t reg[] = {
|
|
|
|
cpu_to_be32(nbase),
|
|
|
|
cpu_to_be32(pecc->xscom_nest_size),
|
|
|
|
cpu_to_be32(pbase),
|
|
|
|
cpu_to_be32(pecc->xscom_pci_size),
|
|
|
|
};
|
|
|
|
|
|
|
|
name = g_strdup_printf("pbcq@%x", nbase);
|
|
|
|
offset = fdt_add_subnode(fdt, xscom_offset, name);
|
|
|
|
_FDT(offset);
|
|
|
|
g_free(name);
|
|
|
|
|
|
|
|
_FDT((fdt_setprop(fdt, offset, "reg", reg, sizeof(reg))));
|
|
|
|
|
|
|
|
_FDT((fdt_setprop_cell(fdt, offset, "ibm,pec-index", pec->index)));
|
|
|
|
_FDT((fdt_setprop_cell(fdt, offset, "#address-cells", 1)));
|
|
|
|
_FDT((fdt_setprop_cell(fdt, offset, "#size-cells", 0)));
|
|
|
|
_FDT((fdt_setprop(fdt, offset, "compatible", pecc->compat,
|
|
|
|
pecc->compat_size)));
|
|
|
|
|
|
|
|
for (i = 0; i < pec->num_stacks; i++) {
|
|
|
|
PnvPhb4PecStack *stack = &pec->stacks[i];
|
|
|
|
PnvPHB4 *phb = &stack->phb;
|
|
|
|
int stk_offset;
|
|
|
|
|
|
|
|
name = g_strdup_printf("stack@%x", i);
|
|
|
|
stk_offset = fdt_add_subnode(fdt, offset, name);
|
|
|
|
_FDT(stk_offset);
|
|
|
|
g_free(name);
|
|
|
|
_FDT((fdt_setprop(fdt, stk_offset, "compatible", pecc->stk_compat,
|
|
|
|
pecc->stk_compat_size)));
|
|
|
|
_FDT((fdt_setprop_cell(fdt, stk_offset, "reg", i)));
|
|
|
|
_FDT((fdt_setprop_cell(fdt, stk_offset, "ibm,phb-index", phb->phb_id)));
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static Property pnv_pec_properties[] = {
|
|
|
|
DEFINE_PROP_UINT32("index", PnvPhb4PecState, index, 0),
|
|
|
|
DEFINE_PROP_UINT32("num-stacks", PnvPhb4PecState, num_stacks, 0),
|
|
|
|
DEFINE_PROP_UINT32("chip-id", PnvPhb4PecState, chip_id, 0),
|
2021-12-17 19:57:19 +03:00
|
|
|
DEFINE_PROP_LINK("chip", PnvPhb4PecState, chip, TYPE_PNV_CHIP,
|
|
|
|
PnvChip *),
|
ppc/pnv: Add models for POWER9 PHB4 PCIe Host bridge
These changes introduces models for the PCIe Host Bridge (PHB4) of the
POWER9 processor. It includes the PowerBus logic interface (PBCQ),
IOMMU support, a single PCIe Gen.4 Root Complex, and support for MSI
and LSI interrupt sources as found on a POWER9 system using the XIVE
interrupt controller.
POWER9 processor comes with 3 PHB4 PEC (PCI Express Controller) and
each PEC can have several PHBs. By default,
* PEC0 provides 1 PHB (PHB0)
* PEC1 provides 2 PHBs (PHB1 and PHB2)
* PEC2 provides 3 PHBs (PHB3, PHB4 and PHB5)
Each PEC has a set "global" registers and some "per-stack" (per-PHB)
registers. Those are organized in two XSCOM ranges, the "Nest" range
and the "PCI" range, each range contains both some "PEC" registers and
some "per-stack" registers.
No default device layout is provided and PCI devices can be added on
any of the available PCIe Root Port (pcie.0 .. 2 of a Power9 chip)
with address 0x0 as the firwware (skiboot) only accepts a single
device per root port. To run a simple system with a network and a
storage adapters, use a command line options such as :
-device e1000e,netdev=net0,mac=C0:FF:EE:00:00:02,bus=pcie.0,addr=0x0
-netdev bridge,id=net0,helper=/usr/libexec/qemu-bridge-helper,br=virbr0,id=hostnet0
-device megasas,id=scsi0,bus=pcie.1,addr=0x0
-drive file=$disk,if=none,id=drive-scsi0-0-0-0,format=qcow2,cache=none
-device scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=0,drive=drive-scsi0-0-0-0,id=scsi0-0-0-0,bootindex=2
If more are needed, include a bridge.
Multi chip is supported, each chip adding its set of PHB4 controllers
and its PCI busses. The model doesn't emulate the EEH error handling.
This model is not ready for hotplug yet.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[ clg: - numerous cleanups
- commit log
- fix for broken LSI support
- PHB pic printinfo
- large QOM rework ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20200127144506.11132-2-clg@kaod.org>
[dwg: Use device_class_set_props()]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-01-27 17:45:05 +03:00
|
|
|
DEFINE_PROP_LINK("system-memory", PnvPhb4PecState, system_memory,
|
|
|
|
TYPE_MEMORY_REGION, MemoryRegion *),
|
|
|
|
DEFINE_PROP_END_OF_LIST(),
|
|
|
|
};
|
|
|
|
|
|
|
|
static uint32_t pnv_pec_xscom_pci_base(PnvPhb4PecState *pec)
|
|
|
|
{
|
|
|
|
return PNV9_XSCOM_PEC_PCI_BASE + 0x1000000 * pec->index;
|
|
|
|
}
|
|
|
|
|
|
|
|
static uint32_t pnv_pec_xscom_nest_base(PnvPhb4PecState *pec)
|
|
|
|
{
|
|
|
|
return PNV9_XSCOM_PEC_NEST_BASE + 0x400 * pec->index;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void pnv_pec_class_init(ObjectClass *klass, void *data)
|
|
|
|
{
|
|
|
|
DeviceClass *dc = DEVICE_CLASS(klass);
|
|
|
|
PnvXScomInterfaceClass *xdc = PNV_XSCOM_INTERFACE_CLASS(klass);
|
|
|
|
PnvPhb4PecClass *pecc = PNV_PHB4_PEC_CLASS(klass);
|
|
|
|
static const char compat[] = "ibm,power9-pbcq";
|
|
|
|
static const char stk_compat[] = "ibm,power9-phb-stack";
|
|
|
|
|
|
|
|
xdc->dt_xscom = pnv_pec_dt_xscom;
|
|
|
|
|
|
|
|
dc->realize = pnv_pec_realize;
|
|
|
|
device_class_set_props(dc, pnv_pec_properties);
|
2020-01-29 14:37:20 +03:00
|
|
|
dc->user_creatable = false;
|
ppc/pnv: Add models for POWER9 PHB4 PCIe Host bridge
These changes introduces models for the PCIe Host Bridge (PHB4) of the
POWER9 processor. It includes the PowerBus logic interface (PBCQ),
IOMMU support, a single PCIe Gen.4 Root Complex, and support for MSI
and LSI interrupt sources as found on a POWER9 system using the XIVE
interrupt controller.
POWER9 processor comes with 3 PHB4 PEC (PCI Express Controller) and
each PEC can have several PHBs. By default,
* PEC0 provides 1 PHB (PHB0)
* PEC1 provides 2 PHBs (PHB1 and PHB2)
* PEC2 provides 3 PHBs (PHB3, PHB4 and PHB5)
Each PEC has a set "global" registers and some "per-stack" (per-PHB)
registers. Those are organized in two XSCOM ranges, the "Nest" range
and the "PCI" range, each range contains both some "PEC" registers and
some "per-stack" registers.
No default device layout is provided and PCI devices can be added on
any of the available PCIe Root Port (pcie.0 .. 2 of a Power9 chip)
with address 0x0 as the firwware (skiboot) only accepts a single
device per root port. To run a simple system with a network and a
storage adapters, use a command line options such as :
-device e1000e,netdev=net0,mac=C0:FF:EE:00:00:02,bus=pcie.0,addr=0x0
-netdev bridge,id=net0,helper=/usr/libexec/qemu-bridge-helper,br=virbr0,id=hostnet0
-device megasas,id=scsi0,bus=pcie.1,addr=0x0
-drive file=$disk,if=none,id=drive-scsi0-0-0-0,format=qcow2,cache=none
-device scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=0,drive=drive-scsi0-0-0-0,id=scsi0-0-0-0,bootindex=2
If more are needed, include a bridge.
Multi chip is supported, each chip adding its set of PHB4 controllers
and its PCI busses. The model doesn't emulate the EEH error handling.
This model is not ready for hotplug yet.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[ clg: - numerous cleanups
- commit log
- fix for broken LSI support
- PHB pic printinfo
- large QOM rework ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20200127144506.11132-2-clg@kaod.org>
[dwg: Use device_class_set_props()]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-01-27 17:45:05 +03:00
|
|
|
|
|
|
|
pecc->xscom_nest_base = pnv_pec_xscom_nest_base;
|
|
|
|
pecc->xscom_pci_base = pnv_pec_xscom_pci_base;
|
|
|
|
pecc->xscom_nest_size = PNV9_XSCOM_PEC_NEST_SIZE;
|
|
|
|
pecc->xscom_pci_size = PNV9_XSCOM_PEC_PCI_SIZE;
|
|
|
|
pecc->compat = compat;
|
|
|
|
pecc->compat_size = sizeof(compat);
|
|
|
|
pecc->stk_compat = stk_compat;
|
|
|
|
pecc->stk_compat_size = sizeof(stk_compat);
|
2021-12-17 19:57:19 +03:00
|
|
|
pecc->version = PNV_PHB4_VERSION;
|
|
|
|
pecc->device_id = PNV_PHB4_DEVICE_ID;
|
ppc/pnv: Add models for POWER9 PHB4 PCIe Host bridge
These changes introduces models for the PCIe Host Bridge (PHB4) of the
POWER9 processor. It includes the PowerBus logic interface (PBCQ),
IOMMU support, a single PCIe Gen.4 Root Complex, and support for MSI
and LSI interrupt sources as found on a POWER9 system using the XIVE
interrupt controller.
POWER9 processor comes with 3 PHB4 PEC (PCI Express Controller) and
each PEC can have several PHBs. By default,
* PEC0 provides 1 PHB (PHB0)
* PEC1 provides 2 PHBs (PHB1 and PHB2)
* PEC2 provides 3 PHBs (PHB3, PHB4 and PHB5)
Each PEC has a set "global" registers and some "per-stack" (per-PHB)
registers. Those are organized in two XSCOM ranges, the "Nest" range
and the "PCI" range, each range contains both some "PEC" registers and
some "per-stack" registers.
No default device layout is provided and PCI devices can be added on
any of the available PCIe Root Port (pcie.0 .. 2 of a Power9 chip)
with address 0x0 as the firwware (skiboot) only accepts a single
device per root port. To run a simple system with a network and a
storage adapters, use a command line options such as :
-device e1000e,netdev=net0,mac=C0:FF:EE:00:00:02,bus=pcie.0,addr=0x0
-netdev bridge,id=net0,helper=/usr/libexec/qemu-bridge-helper,br=virbr0,id=hostnet0
-device megasas,id=scsi0,bus=pcie.1,addr=0x0
-drive file=$disk,if=none,id=drive-scsi0-0-0-0,format=qcow2,cache=none
-device scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=0,drive=drive-scsi0-0-0-0,id=scsi0-0-0-0,bootindex=2
If more are needed, include a bridge.
Multi chip is supported, each chip adding its set of PHB4 controllers
and its PCI busses. The model doesn't emulate the EEH error handling.
This model is not ready for hotplug yet.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[ clg: - numerous cleanups
- commit log
- fix for broken LSI support
- PHB pic printinfo
- large QOM rework ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20200127144506.11132-2-clg@kaod.org>
[dwg: Use device_class_set_props()]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-01-27 17:45:05 +03:00
|
|
|
}
|
|
|
|
|
|
|
|
static const TypeInfo pnv_pec_type_info = {
|
|
|
|
.name = TYPE_PNV_PHB4_PEC,
|
|
|
|
.parent = TYPE_DEVICE,
|
|
|
|
.instance_size = sizeof(PnvPhb4PecState),
|
|
|
|
.instance_init = pnv_pec_instance_init,
|
|
|
|
.class_init = pnv_pec_class_init,
|
|
|
|
.class_size = sizeof(PnvPhb4PecClass),
|
|
|
|
.interfaces = (InterfaceInfo[]) {
|
|
|
|
{ TYPE_PNV_XSCOM_INTERFACE },
|
|
|
|
{ }
|
|
|
|
}
|
|
|
|
};
|
|
|
|
|
|
|
|
static void pnv_pec_stk_instance_init(Object *obj)
|
|
|
|
{
|
|
|
|
PnvPhb4PecStack *stack = PNV_PHB4_PEC_STACK(obj);
|
|
|
|
|
qom: Less verbose object_initialize_child()
All users of object_initialize_child() pass the obvious child size
argument. Almost all pass &error_abort and no properties. Tiresome.
Rename object_initialize_child() to
object_initialize_child_with_props() to free the name. New
convenience wrapper object_initialize_child() automates the size
argument, and passes &error_abort and no properties.
Rename object_initialize_childv() to
object_initialize_child_with_propsv() for consistency.
Convert callers with this Coccinelle script:
@@
expression parent, propname, type;
expression child, size;
symbol error_abort;
@@
- object_initialize_child(parent, propname, OBJECT(child), size, type, &error_abort, NULL)
+ object_initialize_child(parent, propname, child, size, type, &error_abort, NULL)
@@
expression parent, propname, type;
expression child;
symbol error_abort;
@@
- object_initialize_child(parent, propname, child, sizeof(*child), type, &error_abort, NULL)
+ object_initialize_child(parent, propname, child, type)
@@
expression parent, propname, type;
expression child;
symbol error_abort;
@@
- object_initialize_child(parent, propname, &child, sizeof(child), type, &error_abort, NULL)
+ object_initialize_child(parent, propname, &child, type)
@@
expression parent, propname, type;
expression child, size, err;
expression list props;
@@
- object_initialize_child(parent, propname, child, size, type, err, props)
+ object_initialize_child_with_props(parent, propname, child, size, type, err, props)
Note that Coccinelle chokes on ARMSSE typedef vs. macro in
hw/arm/armsse.c. Worked around by temporarily renaming the macro for
the spatch run.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
[Rebased: machine opentitan is new (commit fe0fe4735e7)]
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200610053247.1583243-37-armbru@redhat.com>
2020-06-10 08:32:25 +03:00
|
|
|
object_initialize_child(obj, "phb", &stack->phb, TYPE_PNV_PHB4);
|
ppc/pnv: Add models for POWER9 PHB4 PCIe Host bridge
These changes introduces models for the PCIe Host Bridge (PHB4) of the
POWER9 processor. It includes the PowerBus logic interface (PBCQ),
IOMMU support, a single PCIe Gen.4 Root Complex, and support for MSI
and LSI interrupt sources as found on a POWER9 system using the XIVE
interrupt controller.
POWER9 processor comes with 3 PHB4 PEC (PCI Express Controller) and
each PEC can have several PHBs. By default,
* PEC0 provides 1 PHB (PHB0)
* PEC1 provides 2 PHBs (PHB1 and PHB2)
* PEC2 provides 3 PHBs (PHB3, PHB4 and PHB5)
Each PEC has a set "global" registers and some "per-stack" (per-PHB)
registers. Those are organized in two XSCOM ranges, the "Nest" range
and the "PCI" range, each range contains both some "PEC" registers and
some "per-stack" registers.
No default device layout is provided and PCI devices can be added on
any of the available PCIe Root Port (pcie.0 .. 2 of a Power9 chip)
with address 0x0 as the firwware (skiboot) only accepts a single
device per root port. To run a simple system with a network and a
storage adapters, use a command line options such as :
-device e1000e,netdev=net0,mac=C0:FF:EE:00:00:02,bus=pcie.0,addr=0x0
-netdev bridge,id=net0,helper=/usr/libexec/qemu-bridge-helper,br=virbr0,id=hostnet0
-device megasas,id=scsi0,bus=pcie.1,addr=0x0
-drive file=$disk,if=none,id=drive-scsi0-0-0-0,format=qcow2,cache=none
-device scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=0,drive=drive-scsi0-0-0-0,id=scsi0-0-0-0,bootindex=2
If more are needed, include a bridge.
Multi chip is supported, each chip adding its set of PHB4 controllers
and its PCI busses. The model doesn't emulate the EEH error handling.
This model is not ready for hotplug yet.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[ clg: - numerous cleanups
- commit log
- fix for broken LSI support
- PHB pic printinfo
- large QOM rework ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20200127144506.11132-2-clg@kaod.org>
[dwg: Use device_class_set_props()]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-01-27 17:45:05 +03:00
|
|
|
}
|
|
|
|
|
|
|
|
static void pnv_pec_stk_realize(DeviceState *dev, Error **errp)
|
|
|
|
{
|
|
|
|
PnvPhb4PecStack *stack = PNV_PHB4_PEC_STACK(dev);
|
|
|
|
PnvPhb4PecState *pec = stack->pec;
|
|
|
|
char name[64];
|
|
|
|
|
|
|
|
assert(pec);
|
|
|
|
|
|
|
|
/* Initialize the XSCOM regions for the stack registers */
|
|
|
|
snprintf(name, sizeof(name), "xscom-pec-%d.%d-nest-stack-%d",
|
|
|
|
pec->chip_id, pec->index, stack->stack_no);
|
|
|
|
pnv_xscom_region_init(&stack->nest_regs_mr, OBJECT(stack),
|
|
|
|
&pnv_pec_stk_nest_xscom_ops, stack, name,
|
|
|
|
PHB4_PEC_NEST_STK_REGS_COUNT);
|
|
|
|
|
|
|
|
snprintf(name, sizeof(name), "xscom-pec-%d.%d-pci-stack-%d",
|
|
|
|
pec->chip_id, pec->index, stack->stack_no);
|
|
|
|
pnv_xscom_region_init(&stack->pci_regs_mr, OBJECT(stack),
|
|
|
|
&pnv_pec_stk_pci_xscom_ops, stack, name,
|
|
|
|
PHB4_PEC_PCI_STK_REGS_COUNT);
|
|
|
|
|
|
|
|
/* PHB pass-through */
|
|
|
|
snprintf(name, sizeof(name), "xscom-pec-%d.%d-pci-stack-%d-phb",
|
|
|
|
pec->chip_id, pec->index, stack->stack_no);
|
|
|
|
pnv_xscom_region_init(&stack->phb_regs_mr, OBJECT(&stack->phb),
|
|
|
|
&pnv_phb4_xscom_ops, &stack->phb, name, 0x40);
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Let the machine/chip realize the PHB object to customize more
|
|
|
|
* easily some fields
|
|
|
|
*/
|
|
|
|
}
|
|
|
|
|
|
|
|
static Property pnv_pec_stk_properties[] = {
|
|
|
|
DEFINE_PROP_UINT32("stack-no", PnvPhb4PecStack, stack_no, 0),
|
|
|
|
DEFINE_PROP_LINK("pec", PnvPhb4PecStack, pec, TYPE_PNV_PHB4_PEC,
|
|
|
|
PnvPhb4PecState *),
|
|
|
|
DEFINE_PROP_END_OF_LIST(),
|
|
|
|
};
|
|
|
|
|
|
|
|
static void pnv_pec_stk_class_init(ObjectClass *klass, void *data)
|
|
|
|
{
|
|
|
|
DeviceClass *dc = DEVICE_CLASS(klass);
|
|
|
|
|
|
|
|
device_class_set_props(dc, pnv_pec_stk_properties);
|
|
|
|
dc->realize = pnv_pec_stk_realize;
|
2020-01-29 14:37:20 +03:00
|
|
|
dc->user_creatable = false;
|
ppc/pnv: Add models for POWER9 PHB4 PCIe Host bridge
These changes introduces models for the PCIe Host Bridge (PHB4) of the
POWER9 processor. It includes the PowerBus logic interface (PBCQ),
IOMMU support, a single PCIe Gen.4 Root Complex, and support for MSI
and LSI interrupt sources as found on a POWER9 system using the XIVE
interrupt controller.
POWER9 processor comes with 3 PHB4 PEC (PCI Express Controller) and
each PEC can have several PHBs. By default,
* PEC0 provides 1 PHB (PHB0)
* PEC1 provides 2 PHBs (PHB1 and PHB2)
* PEC2 provides 3 PHBs (PHB3, PHB4 and PHB5)
Each PEC has a set "global" registers and some "per-stack" (per-PHB)
registers. Those are organized in two XSCOM ranges, the "Nest" range
and the "PCI" range, each range contains both some "PEC" registers and
some "per-stack" registers.
No default device layout is provided and PCI devices can be added on
any of the available PCIe Root Port (pcie.0 .. 2 of a Power9 chip)
with address 0x0 as the firwware (skiboot) only accepts a single
device per root port. To run a simple system with a network and a
storage adapters, use a command line options such as :
-device e1000e,netdev=net0,mac=C0:FF:EE:00:00:02,bus=pcie.0,addr=0x0
-netdev bridge,id=net0,helper=/usr/libexec/qemu-bridge-helper,br=virbr0,id=hostnet0
-device megasas,id=scsi0,bus=pcie.1,addr=0x0
-drive file=$disk,if=none,id=drive-scsi0-0-0-0,format=qcow2,cache=none
-device scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=0,drive=drive-scsi0-0-0-0,id=scsi0-0-0-0,bootindex=2
If more are needed, include a bridge.
Multi chip is supported, each chip adding its set of PHB4 controllers
and its PCI busses. The model doesn't emulate the EEH error handling.
This model is not ready for hotplug yet.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[ clg: - numerous cleanups
- commit log
- fix for broken LSI support
- PHB pic printinfo
- large QOM rework ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20200127144506.11132-2-clg@kaod.org>
[dwg: Use device_class_set_props()]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-01-27 17:45:05 +03:00
|
|
|
|
|
|
|
/* TODO: reset regs ? */
|
|
|
|
}
|
|
|
|
|
|
|
|
static const TypeInfo pnv_pec_stk_type_info = {
|
|
|
|
.name = TYPE_PNV_PHB4_PEC_STACK,
|
|
|
|
.parent = TYPE_DEVICE,
|
|
|
|
.instance_size = sizeof(PnvPhb4PecStack),
|
|
|
|
.instance_init = pnv_pec_stk_instance_init,
|
|
|
|
.class_init = pnv_pec_stk_class_init,
|
|
|
|
.interfaces = (InterfaceInfo[]) {
|
|
|
|
{ TYPE_PNV_XSCOM_INTERFACE },
|
|
|
|
{ }
|
|
|
|
}
|
|
|
|
};
|
|
|
|
|
|
|
|
static void pnv_pec_register_types(void)
|
|
|
|
{
|
|
|
|
type_register_static(&pnv_pec_type_info);
|
|
|
|
type_register_static(&pnv_pec_stk_type_info);
|
|
|
|
}
|
|
|
|
|
|
|
|
type_init(pnv_pec_register_types);
|