3245b6d916
Don't turn the cache off in test 0 when performing dummy runs.
...
This should fix the slow startup on multi-socket machines (issue #16 ).
2022-02-19 20:55:41 +00:00
f8b82eb0bd
Exclude copyright notices from Doxygen file descriptions.
2022-02-19 19:56:55 +00:00
d04ec9f681
Rename to Memtest86+ v6.0.
2022-02-19 19:44:58 +00:00
0075375632
Import code from pcmemtest.
2022-02-19 17:58:09 +00:00
3b183b0bef
Add preliminary (untested) code for supporting UHCI.
2022-02-19 16:24:47 +00:00
76adad2fe6
Add ability to generate internal API documentation using Doxygen.
2022-02-19 16:17:40 +00:00
d09c5ed7b4
Remove the power-saving delay loop from the usleep function.
...
Now we halt inactive CPU cores, this should no longer be needed.
2022-02-19 13:04:26 +00:00
0e61b1605e
Remove volatile qualifier from testword pointers.
...
Now we use the atomic read/write functions, these are redundant.
2022-02-19 13:01:42 +00:00
02bcec2418
Remove unnecessary volatile qualifiers from test state variables.
...
Thread safety is ensured by the barriers.
2022-02-19 12:44:14 +00:00
e032df50d2
Minor code improvement for efficiency.
2022-02-19 11:52:42 +00:00
e99a7aedb3
Revert to starting APs before doing the dummy runs.
...
That optimisation occasionally caused a hang if the CPU sequencing
mode was reconfigured after testing had started. It didn't make a
significant difference to the startup delay, so just drop it.
2022-02-18 20:35:36 +00:00
cadad583d7
Eliminate the spinlock used when halting inactive CPU cores.
...
This is a more efficient implementation.
2022-02-18 20:08:24 +00:00
f4a413cf6d
Translate non-usable EFI memory regions to E820_RESERVED, not E820_NONE.
...
This is more correct. Using E820_NONE may have been confusing the code
in pmem.c that sanitises the memory map.
2022-02-13 20:44:58 +00:00
807c4153c1
Add tracing for AP startup.
...
Also comment out tracing of memory window starts to reduce verbosity.
2022-02-13 20:25:58 +00:00
d1382b7a53
Increase timeout delay for starting APs.
2022-02-13 20:25:11 +00:00
16b066c3e3
Exit config menu immediately when "skip test" is selected.
2022-02-13 12:38:38 +00:00
efc9a9c16a
Don't attempt to start the APs when restarting after a config change.
...
Leave the APs running whilst the BSP repeats the dummy runs. This means
we need to bypass the barriers during a dummy run. The APs will wait at
the first barrier until the BSP starts the first real run.
2022-02-12 19:37:58 +00:00
c23b129e55
Remove delay loop from spinlock wait.
...
Now we halt CPU cores that are going to be idle for a lengthy period,
we don't need to try to save power in other ways. And anyway, this was
not very effective.
2022-02-12 19:33:53 +00:00
2bf1623733
Halt CPU cores that are not active in a test.
...
This saves a lot of power when performing sequential tests.
2022-02-12 19:30:14 +00:00
de32bc5412
Ensure we only use 32-bit reads and writes when accessing APIC registers.
2022-02-12 09:39:18 +00:00
99e258457b
Use je/jne instead of jz/jnz when testing boolean variables in startup code.
...
Just for readability - they are aliases for the same instructions.
2022-02-12 09:39:18 +00:00
39d5715224
Fix interrupt handling when long mode is enabled in a 32-bit binary (part 2).
...
Handle passing the processor state to the application interrupt handler.
Update the 64-bit code to match the new trap state structure definition.
2022-02-12 09:39:09 +00:00
c1bc395b4c
Initial commit
2022-02-12 01:48:34 +01:00
111e619b10
Fix interrupt handling when long mode is enabled in a 32-bit binary (part 1).
...
If long mode is enabled, the interrupt handler always runs in 64-bit
mode, so we need to set up the interrupt dispatch table accordingly.
2022-02-08 23:35:00 +00:00
e96fd7b99f
Fix a few minor issues in the 64-bit startup code...
...
- the calculation of the RSP value when an interrupt occurred was
out by 8 bytes
- in a few places a 32-bit pointer was used instead of a 64-bit one
- incorrect tabulation (white space)
2022-02-08 23:29:24 +00:00
93343db711
Remove redundant barrier.
2022-02-07 18:50:22 +00:00
3028cd31f9
Increase sleep time when polling for all other APs started.
...
Also fix warning about usleep not being defined.
2022-02-05 18:07:03 +00:00
242bd77927
Remove unwanted debug code.
2022-02-05 18:04:38 +00:00
7dd17c26c0
Check whether the BIOS has enabled x2APIC mode, and disable SMP if so.
2022-02-05 18:03:32 +00:00
29b8bbece8
Rework AP startup based on how it's done in Linux.
2022-02-05 18:03:32 +00:00
503aea321d
Remove redundant start_mutex.
...
The mutex is now implemented in the assembly language boot code.
2022-02-05 18:03:32 +00:00
9769990679
Extend the use of the startup mutex to cover the entire startup code.
...
There is more in the startup code that isn't thread safe than just
the use of the temporary stack. So take the mutex for the whole time.
The code isn't that long, so it's not worth trying to cover just the
critical sections.
2022-02-05 18:03:32 +00:00
13efd906f1
Guard against an AP starting more than once.
2022-02-03 19:48:27 +00:00
e37fbbd429
Set stack alignment to 16 bytes.
...
This needs to be done in the ldscripts.
2022-02-02 18:23:23 +00:00
1888f5c611
Add change to tests/test.c missed in commit dcac5270.
2022-02-02 15:33:25 +00:00
7acb81e302
Fix assembler warning about unsized bts instruction.
2022-02-02 12:52:44 +00:00
dcac527068
Don't make assumptions about usable memory.
...
When using a legacy BIOS, the memory regions used by the BIOS are well
defined. This is not the case when using a UEFI BIOS. So include the
stack area in the BSS so the loader knows how much memory to allocate,
and check we have space to relocate the program to either low or high
memory.
There are still some assumptions in the USB driver code that need to
be fixed.
2022-02-02 12:20:39 +00:00
fb0f1a7fe5
Don't start APs until after dummy runs have finished.
...
This should significantly improve startup time on machines with many
cores, as the barriers become no-ops during the dummy runs.
2022-02-01 23:50:49 +00:00
fd141c59c7
Use "CPU core" in preference to "CPU" in comments.
2022-02-01 15:42:44 +00:00
da0d2a9fc3
The apic_id_to_cpu_num[] map needs to be unsigned to support > 256 cores.
2022-02-01 15:40:52 +00:00
ccab9ab081
Fix operation with a subset of CPU cores enabled.
...
The last commit removed too much - there are a couple of places where
we need to use a virtual CPU number rather than a physical CPU number.
2022-02-01 15:38:06 +00:00
16d55b7dad
Remove distinction between physical and virtual CPUs.
...
This is no longer needed, now we can display as many CPUs as we can
physically handle.
2022-01-31 22:59:14 +00:00
4100a44b12
Properly protect the startup stack with a mutex.
...
Because we start the APs sequentially, it is unlikely they will coincide
for the brief period that they use the temporary startup stack, but we
should guard against it. This allows us to remove the mutex around the
restart of each AP when relocating, which should improve test times.
2022-01-31 21:54:24 +00:00
17093a96f9
Optimise the AP startup code to reduce the startup delay.
2022-01-31 19:47:32 +00:00
7c3e7d536c
Allow cursor keys to be used in CPU mode and error mode config menus.
2022-01-30 15:47:17 +00:00
e13b8bbb83
Increase config pop-up window width.
...
Also add more constant definitions to better parameterise the layout.
2022-01-30 15:37:13 +00:00
f348add314
Remap numeric keypad to cursor keys.
2022-01-30 15:18:25 +00:00
4589c7dad4
Recognise cursor keys and map them to 'l', 'r', 'u', 'd'.
2022-01-30 15:12:42 +00:00
151870cc0b
Display enabled CPUs as a scrollable list in the config menu.
...
This removes a constraint on the number of CPU cores we can support.
2022-01-30 15:12:04 +00:00
ab278566e4
Bypass start barriers during dummy runs.
...
This should speed up the dummy runs on distributed SMP systems.
2022-01-29 17:11:46 +00:00
Martin Whitaker