The function gets the real time in useconds and puts it in
a Bit64u. This function is defined when:
BX_HAVE_REALTIME_USEC is 1.
Right now, BX_HAVE_REALTIME_USEC is defined to be BX_HAVE_GETTIMEOFDAY
and bx_get_realtime64_usec is defined in terms of gettimeofday().
However, it could be defined in terms of any other method of obtaining
the current time accurate to the usecond. That is why I moved the
function to osdep and added the new define.
the icache pageStamp check too early, before it was known
that the TLB entry would produce a physical address in
range of the normal part of physical memory. PCI accesses
were causing seg faults because of this. I haven't tested
this for PCI.
- Features :
. number of active channels defined at boot-time config
. new options in bochsrc
. up to 8 devices support (disks or cdroms)
. up to 4 cdrom devices can be changed at runtime config
. wxwindows config interface
which says to paste getB_ with flag and then paste with (. It should
be "getB_##flag(void)". Some preprocessors are complaining about pasting
the symbol with the paren.
of (1 & (val32>>N)), and added a getB_?F() accessor for special
cases which need a strict binary value (exactly 0 or 1). Most
code only needed a value for logical comparison. I modified the
special cases which do need a binary number for shifting and
comparison between flags, to use the special getB_?F() accessor.
Cleaned up memory.cc functions a little, now that all accesses
are within a single page.
Fixed a (not very likely encountered) bug in fetchdecode.cc (and
fetchdecode64.cc) where a 2-byte opcode starting with a prefix
starts at the last offset on a page. There were no checks
on the segment overrides for a boundary condition. I added them.
The eflags enhancements added just a tiny bit of performance.
- don't allow MMX on cpu level < 5.
- require FPU support on cpu level >= 55
- don't allow MMX support without FPU support (moved this check from
cpu/i387.h to config.h)
- PacketSetReadTimeout: instead of calling with a very short timeout,
now we call it with -1 which means no timeout.
- Psyon found that Peter Tattam's changes, while necessary for win95, broke
WinNT/2000. So now on Windows NT/2000, we still call
WaitForSingleObject(lpAdapter->ReadEvent,0) but we ignore the return value.
parameter values associated with the dialog and updated the wxWindows
controls. At the time I didn't realize that I was overriding
wxWindow::Refresh() which repaints the window. Later, I renamed the method
to CopyParamToGui() to make it more clear, but many of the callers in
wxmain.cc continued to call Refresh(), which now reverted to the parent class
wxWindow::Refresh(). Since there was no compile error I didn't notice for a
while, but it caused the ParamDialogs to repaint themselves constantly but
never actually change their values. This is now fixed by changing those
method calls to CopyParamToGui().
started using a wxTimer to trigger the redraws. Now instead of calling
MyPanel::OnPaint directly, I call Refresh() instead. This makes the Windows
display work correctly.
I'm not sure why this wasn't needed before, but after switching to
wxWindows 2.3.3 it seems to be important.
- in a wxLogDebug() call I was trying to pass a struct instead of a string.
Fixed that.
- hardcode BX_HAVE_GETTIMEOFDAY=0 if cross compiling for VC++
(this part hasn't been tested)
- modified files: configure configure.in config.h.in iodev/pit_wrap.cc
so frequently.
Coded asm() statements for INC/DEC_ERX() instructions.
Cleaned up the iCache a litle including a bug fix. The
generation ID was decrementing the whole field including
some high meta bits. That could roll over after 1 Billion
cycles. I know only decrement if the field is valid, to
save the write.
I implemented inline functions which can serve the value of
the arithmetic flags if they are cached, and redirect to
the lazy_flags.cc routines if not.
Most of this was just prep work for adding more asm() statements
for native eflags processing when on x86.
'char_changed'. These variables are currently only used by the win32 gui for
the update of the font bitmaps. SDL and wxWindows do not use the variables
since they are using the charmap data directly
- free text snapshot memory when the user has cancelled the dialog
- write text snapshot file in binary mode (disables the LF -> CRLF conversion
in cygwin)
- pci2isa prefix changed to "P2I"
- device name changed to "PIIX3 PCI-to-ISA bridge"
- added more default values to the reset() function
- added stubs for i/o mapped registers
- array pci_conf[] is now a part of the structure s
a precursor to making it a runtime option. I'm not
sure how to do this, but it should be trivial. All it
would take is adding the option and changing the
macro for BX_USE_REALTIME_PIT to point to that option.
also extended by the REX.B field on Hammer) is passed to instructions.
I rearranged the bxInstruction_c to free up a field to be used
to pass this info when mod-rm bytes are not used. This got rid
of the ugly ((i->b1 & 7) + i->rex_b) code.
Probably shaved just a very little run time off Hammer emulation,
and even less on x86-32. The resultant is a little cleaner anyways.
and I could never explain it. The problem was that in keyboard.cc it
included "math.h" with quotes instead of <math.h> with less than/greater
than, so gcc -MM didn't realize it was a system header.
- MyPanel::blankCursor
- MyFrame::panel
- AdvancedLogOptions::action (2d array of wxChoice *'s)
- ParamDialog::idHash, ParamDialog::paramHash, and ParamStructs
- file dialog in BrowseTextCtrl
- fix illegal use of a wxObject. I had been clearing the ParamStruct
with memset(), but I forgot that ParamStruct was a subclass of wxObject
so I was trashing the wxObject fields too! Instead I created a
ParamStruct constructor that clears the pointers to NULL.
- comment out debug output from AdvancedLogOptionsDialog::SetAction
- modified files: gui/wx.cc gui/wxdialog.cc gui/wxdialog.h
gui/wxmain.cc gui/wxmain.h