Bochs/bochs/cpu/stack64.cc

146 lines
3.8 KiB
C++
Raw Normal View History

/////////////////////////////////////////////////////////////////////////
// $Id$
/////////////////////////////////////////////////////////////////////////
//
// Copyright (C) 2001-2013 The Bochs Project
//
// This library is free software; you can redistribute it and/or
// modify it under the terms of the GNU Lesser General Public
// License as published by the Free Software Foundation; either
// version 2 of the License, or (at your option) any later version.
//
// This library is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
// Lesser General Public License for more details.
//
// You should have received a copy of the GNU Lesser General Public
// License along with this library; if not, write to the Free Software
2009-01-16 21:18:59 +03:00
// Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA B 02110-1301 USA
/////////////////////////////////////////////////////////////////////////
#define NEED_CPU_REG_SHORTCUTS 1
#include "bochs.h"
#include "cpu.h"
#define LOG_THIS BX_CPU_THIS_PTR
- apply patch.ifdef-disabled-options. Comments from that patch are below: For a whole lot of configure options, I put #if...#endif around code that is specific to the option, even in files which are normally only compiled when the option is on. This allows me to create a MS Visual C++ 6.0 workspace that supports many of these options. The workspace will basically compile every file all the time, but the code for disabled options will be commented out by the #if...#endif. This may one day lead to simplification of the Makefiles and configure scripts, but for the moment I'm leaving Makefiles and configure scripts alone. Affected options: BX_SUPPORT_APIC (cpu/apic.cc) BX_SUPPORT_X86_64 (cpu/*64.cc) BX_DEBUGGER (debug/*) BX_DISASM (disasm/*) BX_WITH_nameofgui (gui/*) BX_SUPPORT_CDROM (iodev/cdrom.cc) BX_NE2K_SUPPORT (iodev/eth*.cc, iodev/ne2k.cc) BX_SUPPORT_APIC (iodev/ioapic.cc) BX_IODEBUG_SUPPORT (iodev/iodebug.cc) BX_PCI_SUPPORT (iodev/pci*.cc) BX_SUPPORT_SB16 (iodev/sb*.cc) Modified Files: cpu/apic.cc cpu/arith64.cc cpu/ctrl_xfer64.cc cpu/data_xfer64.cc cpu/fetchdecode64.cc cpu/logical64.cc cpu/mult64.cc cpu/resolve64.cc cpu/shift64.cc cpu/stack64.cc debug/Makefile.in debug/crc.cc debug/dbg_main.cc debug/lexer.l debug/linux.cc debug/parser.c debug/parser.y disasm/dis_decode.cc disasm/dis_groups.cc gui/amigaos.cc gui/beos.cc gui/carbon.cc gui/macintosh.cc gui/rfb.cc gui/sdl.cc gui/term.cc gui/win32.cc gui/wx.cc gui/wxdialog.cc gui/wxmain.cc gui/x.cc iodev/cdrom.cc iodev/eth.cc iodev/eth_arpback.cc iodev/eth_fbsd.cc iodev/eth_linux.cc iodev/eth_null.cc iodev/eth_packetmaker.cc iodev/eth_tap.cc iodev/eth_tuntap.cc iodev/eth_win32.cc iodev/ioapic.cc iodev/iodebug.cc iodev/ne2k.cc iodev/pci.cc iodev/pci2isa.cc iodev/sb16.cc iodev/soundlnx.cc iodev/soundwin.cc
2002-11-19 08:47:45 +03:00
#if BX_SUPPORT_X86_64
BX_INSF_TYPE BX_CPP_AttrRegparmN(1) BX_CPU_C::POP_EqM(bxInstruction_c *i)
{
RSP_SPECULATIVE;
Bit64u val64 = pop_64();
2008-02-03 00:46:54 +03:00
// Note: there is one little weirdism here. It is possible to use
// RSP in the modrm addressing. If used, the value of RSP after the
// pop is used to calculate the address.
bx_address eaddr = BX_CPU_CALL_METHODR(i->ResolveModrm, (i));
write_virtual_qword_64(i->seg(), eaddr, val64);
RSP_COMMIT;
BX_NEXT_INSTR(i);
2007-11-18 21:49:19 +03:00
}
BX_INSF_TYPE BX_CPP_AttrRegparmN(1) BX_CPU_C::PUSH_EqR(bxInstruction_c *i)
{
push_64(BX_READ_64BIT_REG(i->dst()));
BX_NEXT_INSTR(i);
}
BX_INSF_TYPE BX_CPP_AttrRegparmN(1) BX_CPU_C::POP_EqR(bxInstruction_c *i)
{
BX_WRITE_64BIT_REG(i->dst(), pop_64());
BX_NEXT_INSTR(i);
}
BX_INSF_TYPE BX_CPP_AttrRegparmN(1) BX_CPU_C::PUSH64_Sw(bxInstruction_c *i)
{
push_64(BX_CPU_THIS_PTR sregs[i->src()].selector.value);
BX_NEXT_INSTR(i);
}
BX_INSF_TYPE BX_CPP_AttrRegparmN(1) BX_CPU_C::POP64_Sw(bxInstruction_c *i)
{
Bit16u selector = stack_read_word(RSP);
load_seg_reg(&BX_CPU_THIS_PTR sregs[i->dst()], selector);
RSP += 8;
BX_NEXT_INSTR(i);
}
BX_INSF_TYPE BX_CPP_AttrRegparmN(1) BX_CPU_C::PUSH64_Id(bxInstruction_c *i)
{
Bit64u imm64 = (Bit32s) i->Id();
push_64(imm64);
BX_NEXT_INSTR(i);
}
BX_INSF_TYPE BX_CPP_AttrRegparmN(1) BX_CPU_C::PUSH_EqM(bxInstruction_c *i)
{
bx_address eaddr = BX_CPU_CALL_METHODR(i->ResolveModrm, (i));
Bit64u op1_64 = read_virtual_qword_64(i->seg(), eaddr);
push_64(op1_64);
BX_NEXT_INSTR(i);
}
BX_INSF_TYPE BX_CPP_AttrRegparmN(1) BX_CPU_C::ENTER64_IwIb(bxInstruction_c *i)
{
Bit8u level = i->Ib2();
level &= 0x1F;
2010-03-12 23:59:05 +03:00
Bit64u temp_RSP = RSP, temp_RBP = RBP;
2010-03-12 23:59:05 +03:00
temp_RSP -= 8;
stack_write_qword(temp_RSP, temp_RBP);
2010-03-12 23:59:05 +03:00
Bit64u frame_ptr64 = temp_RSP;
if (level > 0) {
/* do level-1 times */
while (--level) {
2010-03-12 23:59:05 +03:00
temp_RBP -= 8;
Bit64u temp64 = stack_read_qword(temp_RBP);
2010-03-12 23:59:05 +03:00
temp_RSP -= 8;
stack_write_qword(temp_RSP, temp64);
} /* while (--level) */
/* push(frame pointer) */
2010-03-12 23:59:05 +03:00
temp_RSP -= 8;
stack_write_qword(temp_RSP, frame_ptr64);
} /* if (level > 0) ... */
2010-03-12 23:59:05 +03:00
temp_RSP -= i->Iw();
2008-05-08 22:02:21 +04:00
// ENTER finishes with memory write check on the final stack pointer
// the memory is touched but no write actually occurs
// emulate it by doing RMW read access from SS:RSP
2010-03-12 23:59:05 +03:00
read_RMW_virtual_qword_64(BX_SEG_REG_SS, temp_RSP);
RBP = frame_ptr64;
2010-03-12 23:59:05 +03:00
RSP = temp_RSP;
BX_NEXT_INSTR(i);
}
BX_INSF_TYPE BX_CPP_AttrRegparmN(1) BX_CPU_C::LEAVE64(bxInstruction_c *i)
{
// restore frame pointer
Bit64u temp64 = stack_read_qword(RBP);
RSP = RBP + 8;
RBP = temp64;
BX_NEXT_INSTR(i);
}
- apply patch.ifdef-disabled-options. Comments from that patch are below: For a whole lot of configure options, I put #if...#endif around code that is specific to the option, even in files which are normally only compiled when the option is on. This allows me to create a MS Visual C++ 6.0 workspace that supports many of these options. The workspace will basically compile every file all the time, but the code for disabled options will be commented out by the #if...#endif. This may one day lead to simplification of the Makefiles and configure scripts, but for the moment I'm leaving Makefiles and configure scripts alone. Affected options: BX_SUPPORT_APIC (cpu/apic.cc) BX_SUPPORT_X86_64 (cpu/*64.cc) BX_DEBUGGER (debug/*) BX_DISASM (disasm/*) BX_WITH_nameofgui (gui/*) BX_SUPPORT_CDROM (iodev/cdrom.cc) BX_NE2K_SUPPORT (iodev/eth*.cc, iodev/ne2k.cc) BX_SUPPORT_APIC (iodev/ioapic.cc) BX_IODEBUG_SUPPORT (iodev/iodebug.cc) BX_PCI_SUPPORT (iodev/pci*.cc) BX_SUPPORT_SB16 (iodev/sb*.cc) Modified Files: cpu/apic.cc cpu/arith64.cc cpu/ctrl_xfer64.cc cpu/data_xfer64.cc cpu/fetchdecode64.cc cpu/logical64.cc cpu/mult64.cc cpu/resolve64.cc cpu/shift64.cc cpu/stack64.cc debug/Makefile.in debug/crc.cc debug/dbg_main.cc debug/lexer.l debug/linux.cc debug/parser.c debug/parser.y disasm/dis_decode.cc disasm/dis_groups.cc gui/amigaos.cc gui/beos.cc gui/carbon.cc gui/macintosh.cc gui/rfb.cc gui/sdl.cc gui/term.cc gui/win32.cc gui/wx.cc gui/wxdialog.cc gui/wxmain.cc gui/x.cc iodev/cdrom.cc iodev/eth.cc iodev/eth_arpback.cc iodev/eth_fbsd.cc iodev/eth_linux.cc iodev/eth_null.cc iodev/eth_packetmaker.cc iodev/eth_tap.cc iodev/eth_tuntap.cc iodev/eth_win32.cc iodev/ioapic.cc iodev/iodebug.cc iodev/ne2k.cc iodev/pci.cc iodev/pci2isa.cc iodev/sb16.cc iodev/soundlnx.cc iodev/soundwin.cc
2002-11-19 08:47:45 +03:00
#endif /* if BX_SUPPORT_X86_64 */