guarantees that the virtual hook is called in all cases, and fixes bugs 1252 and 1838.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25559 a95241bf-73f2-0310-859d-f6bbb57e9c96
the failed transfer if the transfer in question is found to be the offending
one. Probably not quite enough and still untested.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25558 a95241bf-73f2-0310-859d-f6bbb57e9c96
supports up to 15 ports and QEMUs OHCI emulation uses a port count of 10
for example.
* Update the hub code to remove the hardcoded 8 port limits.
* Some other code to enumerate the USB structure I had laying around
(available internally only, might be added as a public API some time).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25555 a95241bf-73f2-0310-859d-f6bbb57e9c96
on resources but still satisfy the scheduling policy. This works well, but
effectifly limits the bandwidth available as the interrupts aren't spread
across different frames.
* Implement finding the interrupt endpoint head for a certain interval.
* Deactivate endpoints that are going away until removing them is implemented.
* Allow short packets for all data phases.
* Disable tracing by default.
There you go, interrupt transfers should work as well. Should enable mice,
keyboards, hubs and other devices that use interrupt pipes. Note that it's
still easily possible that a single failed request will hang an endpoint and
prevent a device from working.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25554 a95241bf-73f2-0310-859d-f6bbb57e9c96
single td bulk transfers.
* Implement SubmitTransfer() for bulk transfers (interrupts will use the exact
same code path, but as their endpoints aren't yet setup, interrupt transfers
won't work).
* Handle the cancel case when finishing transfers. The descriptors of the
canceled transfers cannot be accessed by the controller so they can be freed.
Bulk transfers should work now, so devices only using control and bulk transfers
should too (anything using usb_disk for example). Note though that a transfer
error will cause the whole thing to fail miserably as the error case is not
yet handled correctly (failed descriptors aren't removed from the endpoint).
Therefore I suggest not testing with the memory stick with that important
presentation you haven't stored anywhere else...
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25549 a95241bf-73f2-0310-859d-f6bbb57e9c96
pretty much the same strategy as UHCI. This does not leverage the done queue
the hardware provides us, but as it saves a lot of other overhead and allows
the structures to be smaller I think it is overall worth it.
* Removed now unnecessary stuff from the transfer descriptor struct.
* Directly acknowledge the done head interrupt as we do not use it either.
* Activate control endpoints by removing the skip bit when a transfer is scheduled.
* Correct the way the first descriptor is determined (the current tail becomes
the first descriptor while the current first descriptor becomes the tail).
* Remove the head_logical_descriptor field from the endpoint structure, as this
would simply get out of sync with the first td with no real way of updating.
* Stub out RemoveTransferFromEndpoint() as this needs reworking.
* Correct CreateDescriptorChain() signature and implement the method.
* Add ReadDescriptorChain() and ReadActualLength() to process finished transfers.
* Prepare for actual data transfers by renaming/regrouping transfer types.
* Fully clear out the new tail when switching (for the sake of it)
* Add some helpers and definitions to the hardware header.
* Add debugging facilities.
With all this transfers can now actually be scheduled and they are processed
when done. This brings control transfers to a usable state so setting the
device address and reading out/setting the configuration works. That means you
can now view your device using usb_dev_info, but since any other transfer type
besides control transfers isn't implemented yet the device will most probably
not yet do anything useful.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25546 a95241bf-73f2-0310-859d-f6bbb57e9c96
deadlock with the BusManager on setup of the default pipes (for addressing).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25542 a95241bf-73f2-0310-859d-f6bbb57e9c96
appended to an endpoint descriptor without locking/disabling the endpoint.
* Correct the direction of the data phase of a control transfer.
* Some minor cleanup.
Control requests without data phase (set address for example) might actually
work now, but this is still untested.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25541 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Reorder to match the usual order of the states/commands
* Fix some debug output and make it more informative
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25540 a95241bf-73f2-0310-859d-f6bbb57e9c96
driver has at least a chance of working (it previously always used wrong
offsets for register access).
* Remove the hash approach for now (I'm going to explore a few other ways of
doing that first).
* Reorder some stuff and check for errors in some more places.
* More cleanup (mostly whitespace again).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25538 a95241bf-73f2-0310-859d-f6bbb57e9c96
4). One has to have a (fully configured) "generated" directory for the
alternative gcc and specify it using the new option
"--alternative-gcc-output-dir" when configuring the main build.
Additionally the build variable HAIKU_ADD_ALTERNATIVE_GCC_LIBS has to be
set to "1".
If that has been done, when building the image a sub-jam is invoked that
generates the alternative libs and zips them. The main-jam unzips them
into the correct directory in the image. Note that the JAM build
variable has to be set when using a jam executable not invoked by "jam".
Tested with gcc 2 NetPositive, Pe, and FireFox under gcc 4 Haiku, and
with a few of the standard gcc 4 Haiku apps under gcc 2 Haiku. Seems to
work fine so far.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25536 a95241bf-73f2-0310-859d-f6bbb57e9c96
the targets/symlinks added to a container/Haiku image directory.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25535 a95241bf-73f2-0310-859d-f6bbb57e9c96
* If not built for BeOS or Haiku, we use _kern_open() instead of open(),
so we get attribute emulation support.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25533 a95241bf-73f2-0310-859d-f6bbb57e9c96
respectively other gcc version on a Haiku compiled with gcc 2 or gcc 4.
The libraries for such an executable are first searched in "gcc4"
respectively "gcc2" subdirectories of the standard search path
directories. If not found there, we try again with the standard paths.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25532 a95241bf-73f2-0310-859d-f6bbb57e9c96
compatible with what our code assumed (pointers to objects of
TraceEntry and its POD base class trace_entry aren't identical
anymore).
* Added optional stack traces for ktrace_printf() output in the kernel.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25531 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Small style changes.
* Currently ifdef'ed out potentially correct changes, that break Neon
tests which otherwise succeed. Axel will investigate this further.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25530 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Cleanup (whitespace, nameing, code style)
* Move around methods so they match the header order
* Fix some obvious stuff
* Initialize all members
* Sync roothub code (this will be reworked to a common roothub)
* Only minor functional changes (to the worse for now)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25527 a95241bf-73f2-0310-859d-f6bbb57e9c96
_WaitForEstablished() must also accept states implying that the state
has been established at some point. Fixes bug #2172.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25526 a95241bf-73f2-0310-859d-f6bbb57e9c96
Changed condition variables so that it is allowed to block (e.g. lock
mutexes etc.) between Add() and Wait(). This fixes#2059, since the
block writer used them this way and could thusly fail to wait for a
condition variable, causing a temporary stack object to be used past its
lifetime.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25525 a95241bf-73f2-0310-859d-f6bbb57e9c96
transform only, not combined with the shapes own scale, since that is likely
not what the user intended.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25521 a95241bf-73f2-0310-859d-f6bbb57e9c96
that arrived before the shutdown can still be read.
* Debug some more returns.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25514 a95241bf-73f2-0310-859d-f6bbb57e9c96
into the kernel:
* Added device_removed() function to the device level as well.
* A device_node now also tracks its published devices.
* Made the driver API more consistent with the device API; instead of the node,
they now get the driverCookie (so they now need to store the node themselves,
the driver cookie could be retrieved via the node).
Alternatively, one could either pass both, or have something similar to what
Ingo did for the file systems, ie. pass a structure that contains both
elements. Suggestions welcome.
* Implemented device node replacement when a better driver becomes available:
the new node (and its devices) is already published even though the old device
is still in use. The new device is B_BUSY until the old one is closed.
* Implemented an update cycle counter: this will prevent a device node from
being probed again, if there is no new driver since the last time; eventually
this will be moved into devfs, though.
* Driver removal and replacement now works as expected in all tested scenarios
(device removed, better driver installed, both with and without open device).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25512 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Use find_directory() for the hash for preloaded modules. I am not sure this
patch is needed, since it only concerns the hash. Please review.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25511 a95241bf-73f2-0310-859d-f6bbb57e9c96