Currently it only contains KDEBUG and the block cache debugging macros.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27816 a95241bf-73f2-0310-859d-f6bbb57e9c96
buffer format, the buffer can now also contain other events than just
stack traces. ATM these are only references to the image events
(created/deleted). Therefore we no longer have to flush the profiling
buffer after such an event, since the debugger can exactly match the
samples. Since we couldn't flush when the profiling timer hit while the
thread was in the kernel, that wasn't working that well anyway.
"profile -f" fails to translate stack trace addresses only very rarely,
now.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27775 a95241bf-73f2-0310-859d-f6bbb57e9c96
letting the boot loader provide full paths for the pre-loaded images.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27753 a95241bf-73f2-0310-859d-f6bbb57e9c96
been mounted, before anyone could try to load any modules from it.
Also pass it a flag whether the boot volume is where the boot loader
pre-loaded the modules from.
* module_init_post_boot_device() changes the pre-loaded module image
paths to normalized boot volume paths, now. Got rid of the code in
register_preloaded_module_image() which tried something like this.
* Changed module image ref counting. A referenced module has single
reference to its image, which is released when the module becomes
unreferenced.
* get_module() for a reference module will not try to re-get and re-set
the module's image anymore. That could lead to a similar module (from
different paths) being loaded at the same time. A module from a new
file can only be loaded when the old one has been put completely.
* Simplified B_KEEP_ALIVE module handling a bit. When the module is
initialized, we add another reference, which we'll never free. Thus
the module remains loaded without special handling. Removed
module_image::keep_loaded. A B_KEEP_ALIVE module remains referenced
and thus its image remains referenced, too.
* Removed module::file, a cached path to the module's image. An
optimization that wouldn't work with multiple root directories for
modules (/boot/beos/..., /boot/common/...) or when module files were
moved. get_module() does now always search the image file, when the
module is still unreferenced. This should be a bit slower than before,
but I didn't notice any difference in VMware at least. If it turns out
to be a problem we could introduce a more intelligent cache that stays
up to date by using node monitoring.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27752 a95241bf-73f2-0310-859d-f6bbb57e9c96
function (normalize_path()), now. There was some code duplication
before.
* Added "bool traverseLink" parameter to vfs_normalize_path(). When
true and the leaf component is a symlink, it will be resolved.
* KPath:
- Added similar leaf link traversal parameter to SetTo() and
SetPath().
- Added Normalize().
- Added DetachBuffer(), which returns the object's current buffer and
unsets itself.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27751 a95241bf-73f2-0310-859d-f6bbb57e9c96
elf_add_memory_image_symbol(). The former creates and registers a new
image that has not been loaded from a file. The latter adds a symbol to
its symbol table. This is mainly a debug feature, allowing to name code
or data in memory regions that aren't associated with loaded ELF
objects.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27721 a95241bf-73f2-0310-859d-f6bbb57e9c96
been called for a team, and fail installing the default debugger if it
is set. This makes disable_debugger() actually work. Fixes bug #2763.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27713 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Extended the profiling API by an option to record a variable number of
samples per tick. The stack depth is used as a maximum.
* Added new option "-f" to the "profile" tool. When specified it
increments the hit counts of all symbols in the full available caller
stack. I.e. the resulting hit counts will approximate the total time
spent in each function or any function directly or indirectly called
by it. Thus "_start" and "main" will usually get 100% and leaf
functions only what time has actually been spent in them.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27699 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Relaxed the stack depth and profiling interval limits a bit.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27697 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Reduced the kernel_args array size from 32 to 16 (7 are used on a normal
build).
* Cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27690 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Fixed hash_remove_current(): It didn't update "lastElement" and thus
always also removed all elements in the same bucket preceding the one
to be removed. Also got rid of the useless "for" loop.
Fixes#2757.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27689 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Adjusted used files systems accordingly.
* BFS::Stream::GetName() was broken. It accessed the small data region
which wasn't loaded, since BFS::Stream derived from bfs_inode, which
is a variably-sized structure with the small data region at the end.
Changed that to a ref-counted, shared member instead.
* Implemented RootFileSystem::GetName().
* Added Directory::GetPath() to get a full path of the directory or an
entry.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27664 a95241bf-73f2-0310-859d-f6bbb57e9c96
buffer during a timer event that interrupted a kernel function: We do
now flush the buffer as soon as it is 70% full, *if* we didn't interrupt
a kernel function. When the buffer runs full and we still haven't hit a
user function, we drop the tick. The number of dropped ticks is recorded
and sent to the debugger with the next update message.
Reverted the previous partial solution (the temporary disabling of
profiling while in debugger support code).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27658 a95241bf-73f2-0310-859d-f6bbb57e9c96
is created or deleted (or exec*() has been invoked). The counter is
sent with several debugger messages.
* Track the image event counter that is used when samples are added to
the profiling buffer. If the current team counter differs, we flush
the buffer first (sending an update message to the debugger), so that
the debugger has a chance to match the addresses to the correct images.
* Disable profiling for a thread while it runs in the debugger support
code. This fixes potential deadlocks which could occur when a
profiling timer event occurred that would require the buffer to be
flushed while the thread was just sending something to the debugger or
waiting for a command. As it turns out, this is not sufficient either,
since we should never try to flush the buffer when the timer event
occurred in the kernel, since the thread might hold a lock that the
debugger thread could try to acquire. Will implement a more general
solution later.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27656 a95241bf-73f2-0310-859d-f6bbb57e9c96
* We can't enable interrupts in an interrupt handler. Instead we use the
newly introduced callback feature, which notifies the debugger right
before returning from the interrupt.
* We didn't indicate that the profiling buffer was full and that the
thread shouldn't be profiled ATM. Therefore it could happen that it
was profiled while trying to notify the debugger that the profiling
buffer was full, resulting in a deadlock. Introduce a respective flag
in the thread debug structure.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27649 a95241bf-73f2-0310-859d-f6bbb57e9c96
interrupt handler and will be executed right before returning from the
interrupt.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27648 a95241bf-73f2-0310-859d-f6bbb57e9c96
be tracked to the kernel, which then counts the hits, an area is
passed to kernel in which the hits are recorded. When the area is
full, the debugger is notified. For some reason that part doesn't work
yet -- the whole system freezes when waiting for a reply.
* Reorganized the profile tool code a bit. For one with respect to the
changed API, but also to prepare tracking of image creation/deletion.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27640 a95241bf-73f2-0310-859d-f6bbb57e9c96
various system information.
* Implemented retrieving some VM stats via this call.
* The VM now maintains a page fault counter, and sets system_info::page_faults
accordingly.
* Added a (pretty simple) "vmstat" command line app.
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27597 a95241bf-73f2-0310-859d-f6bbb57e9c96
VMware this doesn't produce very good results though. In my tests I only
got twice as many hits as with 1 ms, although it should be roughly ten
times as many. Might work better on real hardware.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27572 a95241bf-73f2-0310-859d-f6bbb57e9c96
still pretty much work in progress.
* Introduced init_thread_debug_info() which is used instead of
clear_thread_debug_info() when the thread is created. The latter
requires former initialization.
* user_debug_thread_deleted() is now already invoked in thread_exit(),
not in the undertaker.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27531 a95241bf-73f2-0310-859d-f6bbb57e9c96
many iframes are supposed to be skipped before recording the stack
trace. Currently implemented for x86 only.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27529 a95241bf-73f2-0310-859d-f6bbb57e9c96
When specified, the message is read but not removed from the port.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27527 a95241bf-73f2-0310-859d-f6bbb57e9c96
be used now. Tested only with VMware so far.
* apm_shutdown() is now called with interrupts turned on.
* Renamed arch_cpu.c to arch_cpu.cpp.
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27404 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Imported radix bitmap tree implementation from FreeBSD and adjusted it
for Haiku.
* Make use of the radix tree in the swap support implementation instead
of using simple bitmaps. This will allow for faster swap slot
allocations. ATM Haiku doesn't benefit that much, since we always
allocate single pages, but that will change eventually.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27355 a95241bf-73f2-0310-859d-f6bbb57e9c96
unscheduled was incorrect.
* Introduced _kern_analyze_scheduling() syscall. It requires scheduler
kernel tracing to be enabled. It uses the tracing entries for a given
period of time to do a similar analysis the "scheduler" debugger
command does (i.e. number of runs, run time, latencies, preemption
times) for each thread. Additionally the analysis includes for each
thread how long the thread waited on each locking primitive in total.
* Added kernel tracing for the creation of semaphores and initialization
of condition variables, mutexes, and rw locks. The enabling macro is
SCHEDULING_ANALYSIS_TRACING. The only purpose is to provide
_kern_analyze_scheduling() with more info on the locking primitives
(the name in particular).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27304 a95241bf-73f2-0310-859d-f6bbb57e9c96
tracing buffer entries even when not in the kernel debugger.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27302 a95241bf-73f2-0310-859d-f6bbb57e9c96
for message queue
* Removed unnecessary header Vector.h
* Removed HasSemaphoreSet method: since there will be an IPC table for each
subsystem, if a key exist, it already has a semaphore set associated
with it
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27256 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Implemented _kern_msgget()
Work in progress, some stuff may be removed.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27254 a95241bf-73f2-0310-859d-f6bbb57e9c96
256 MB RAM, 1.5 GB swap, and "jam -j2", so it basically seems to do its
job alright.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27233 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Implement color palette generation for the boot splash images in the
generate_boot_screen build tool. Only 4-bit screen support is missing now.
* Adopted images.h with the new results from generate_boot_screen.
This should fix black boot screens for graphics cards that don't support
true color modes for the native resolution. I've tried to find the ticket,
#2177 almost looks like the one, but it looks more like the mode is out
of range if I understand the ticket right.
Thanks a lot, David, and sorry it took so very long to apply your patch!
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27223 a95241bf-73f2-0310-859d-f6bbb57e9c96
referencing iframe registers. Their prefix is "$". E.g. "$eax" refers to
the eax register of the current iframe. The features cooperates with the
"in_context" command, i.e. "in_context 92 $eip = 0" will set the eip
register of thread 92 to 0 (thus sealing its fate ;-)).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27192 a95241bf-73f2-0310-859d-f6bbb57e9c96
due to alignment padding before.
* Reorganized merging of caches a bit. Renamed MergeStore() to Merge()
and moved some more functionality into it. The method also moves the
pages from source to consumer, now. This is necessary, since
VMAnonymousCache needs to consider both physical pages and swap pages
at the same time. Before we first moved the physical pages and the
swap pages later, which was broken for two reasons: (1) A swap page in
the consumer cache shadows a physical page of the source cache, which
we ignored. (2) A source cache's physical page that also had a swap
page would lose the latter in the process when moved to the consumer
cache, i.e. if the page was not marked modified, it could be stolen
and its data would be lost.
These changes improve the situation when building Haiku with 256 MB RAM
in that jam doesn't crash anymore, but in my test the system became
totally unusable after about an hour or 7000 targets (GUI froze). For
some reason it didn't manage to free pages anymore although swapping
heavily.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27179 a95241bf-73f2-0310-859d-f6bbb57e9c96
PC of the innermost iframe.
* The "in_context" command does now set the currently debugged thread
respectively.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27166 a95241bf-73f2-0310-859d-f6bbb57e9c96
debugger and added respective getter/setter methods
debug_{get,set}_debugged_thread(). By default the currently debugged
thread is the thread that dropped into the kernel debugger, but commands
like "in_context" can change it.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27164 a95241bf-73f2-0310-859d-f6bbb57e9c96
state_to_text().
* state_to_text() can now deal with a NULL thread argument.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27163 a95241bf-73f2-0310-859d-f6bbb57e9c96
first command line argument of a given command line string.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27155 a95241bf-73f2-0310-859d-f6bbb57e9c96
as they aren't unloaded when there is no boot device yet.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27136 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added a second kernel daemon service, resource resizer, which is
mainly supposed to be used for resizing allocations asynchrounously.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27122 a95241bf-73f2-0310-859d-f6bbb57e9c96
create_area_etc().
* When the new flag CREATE_AREA_DONT_WAIT is specified, the functions
don't wait for memory or pages to become available. They fail
immediately instead.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27117 a95241bf-73f2-0310-859d-f6bbb57e9c96
of free objects an object cache should try to have ready. If the number
of free objects drops below the threshold, a new urgent priority thread
is asked to asynchronously resize the object cache (pretty similar to
the heap grower thread). Such a mechanism is necessary for code paths
that are supposed to free pages, but may need memory themselves (like
the swap support).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27100 a95241bf-73f2-0310-859d-f6bbb57e9c96
is enabled to set a per-heap get_caller() function.
* Added "-h <heap>" option to the "allocations_per_caller" command. If
given only the allocation for the specified heap are considered.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27097 a95241bf-73f2-0310-859d-f6bbb57e9c96
be passed on to the IORequest. Most relevantly physical pages can now
be written directly by passing B_PHYSICAL_IO_REQUEST.
* Added VMCache::WriteAsync() which is supposed to write pages
asynchronously. The base class version version falls back to the
synchronous Write(). Only VMVnodeCache implements WriteAsync() ATM,
VMAnonymousCache (swap support) still has to be adjusted accordingly.
* write_page() doesn't need to map the page anymore as it can write the
physical page directly.
* Modified the page writer to write pages asynchronously. This shouldn't
have any noticeable effect yet. It will though as soon as the I/O
scheduler reorders I/O operations.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27056 a95241bf-73f2-0310-859d-f6bbb57e9c96
writes the given page iovecs asynchronously. The new class
AsyncIOCallback is used to inform the caller when the request has been
finished.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27055 a95241bf-73f2-0310-859d-f6bbb57e9c96
Ingo suggestions: instead of having one global sem_undo list,
we now have two local list, one per semaphore set and one per team
which is held in its xsi_sem_context structure, along with a mutex.
A mutex has also been added to the semaphore set class in order to
protect the local list, but also in order to (hopefully) improve
concurrency.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26993 a95241bf-73f2-0310-859d-f6bbb57e9c96
heap_class object now. Removed unused heap_allocator::heap_class.
* Made heap_class, heap_create_allocator(), heap_memalign(), heap_free()
public, so that a specialized allocator can be used elsewhere in the
kernel.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26965 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Fixed TraceEntryIterator::Current(): If fEntry was NULL, it would
return 0x4.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26955 a95241bf-73f2-0310-859d-f6bbb57e9c96
(fault address, pc, read/write) when a page fault occurs, and print them
in case this caused the termination of a debugger command.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26949 a95241bf-73f2-0310-859d-f6bbb57e9c96
specifying the protection of each page (4 bits per page).
* Added no-op implementation of posix_madvise().
* Replaced a few "addr_t size" parameters by "size_t size".
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26871 a95241bf-73f2-0310-859d-f6bbb57e9c96
dedicated functions.
* Introduced gMappedPagesCount variable which counts the total number of
physical pages that are mapped.
* Added vm_page_get_stats() which fills in the memory related part of
the system_info structure. Used and cached pages are computed
differently, now. The "available" (== not committed) memory is no
longer used for the computation as it doesn't say anything about the
actually used/free pages (with swap support enabled it is even
less meaningful, since we first commit swap space when possible).
We do also consider the memory used by the block cache as cached
pages, now. All in all these changes should fix the memory statistics
reported by get_system_info(), IOW bug #2574.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26837 a95241bf-73f2-0310-859d-f6bbb57e9c96
include the guard pages. Adjusted the kernel and boot loader code
accordingly -- the guard pages size is added/not removed respectively.
The stack size passed to _kern_spawn_thread() is now the actually usable
size, and it is no longer possible to specify a size smaller than or
equal to the guard pages size.
* vm_create_anonymous_area(): Precommit two pages maximum -- a stack with
only one page usable size obviously doesn't need two pages.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26819 a95241bf-73f2-0310-859d-f6bbb57e9c96
now a lot earlier.
* That makes it now possible to use modules pretty early in the kernel (like
before timer_init(), or int_init_post_vm()).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26790 a95241bf-73f2-0310-859d-f6bbb57e9c96
and size of the double fault stack.
* is_kernel_stack_address() does now also check whether the given
address is on the double fault stack. This fixes stack traces on
double faults, which were broken (i.e. went only to the double fault
iframe) since we started checking whether the addresses are on the
kernel stack at all.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26775 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Dumping the features as string is now a one time thing, that only happens
when DUMP_FEATURE_STRING is defined to 1.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26733 a95241bf-73f2-0310-859d-f6bbb57e9c96
gTeamSpinlock.
* Renamed the static global variables in smp.c to match our style guide.
* Minor other cleanup.
* Removed superfluous white space.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26730 a95241bf-73f2-0310-859d-f6bbb57e9c96
- Fixed deadlock in xsi_sem_undo - RecordUndo
- Fixed issue in xsi_sem_undo: if the semaphore set does not exist
anymore, ignore the request but do remove the process from the sUndoList,
which wasn't previously done.
- free() in ClearUndos was called with interrupts disabled
- when a semaphore set ends to exist, remove all it's sem_undo request as it's ID
will be reused in the future.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26727 a95241bf-73f2-0310-859d-f6bbb57e9c96
partially (e.g. due to hitting the end of file). The respective
classes have grown new methods and attributes to deal with that. The
"finished" callbacks have got additional parameters to indicate
whether the transfer was only partial and how much has been
transferred. Other callbacks and functions have a size_t* in/out
parameter instead of a simple size_t, now.
* vfs_{read,write}_pages() do now use the I/O request framework instead
of the underlying FS's {read,write}_pages() hooks (those should be
unused now). Furthermore they've got an additional "flags" parameter,
which is passed to IORequest::Init(), i.e. it allows to specify that
the given vecs refer to physical addresses.
* The file cache's read_into_cache() reads directly into physical
pages, now.
* Fixed bug in DoIO::IO(): The offset was not adjusted, so that all
pages were incorrectly transferred from/to the same location.
* Fixed broken subrequest scheduling loop head in
do_iterative_fd_io_iterate().
* Adjusted the test driver and implemented its io() hook. Using this
driver I/O requests are passed all the way from the VFS/VM to the
driver and through the I/O scheduler. It even seems to work. :-)
* Added missing const to the iovec* parameter of the IORequest::Init()
methods.
* Disabled some debug output by default. Added new optional debug
output.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26692 a95241bf-73f2-0310-859d-f6bbb57e9c96
is defined to 1; this allows asserting the read lock case, too.
* Added ASSERT_{READ|WRITE}_LOCKED_RW_LOCK() macros. The read assertion is only
working when KDEBUG_RW_LOCK_DEBUG is defined to 1, the write assertion works
always.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26686 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added "syslog" command that dumps the contents of the syslog ring buffer into
KDL. Use the '-n' option to only show what hasn't been sent to the syslog
daemon yet.
* When entering the kernel debugger, the current thread ID and name are also
printed (not only the current CPU).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26684 a95241bf-73f2-0310-859d-f6bbb57e9c96
by myself:
* renamed xsi_do_undo() to xsi_sem_undo() (there is more to XSI than sems).
* Fixed coding style issues in sys/sem.h and xsi_sem.cpp.
* Added _kern_*() syscall prototypes to syscalls.h.
* Added a TODO in xsi_sem.cpp and xsi_semaphore.h about moving union semun to
a shared header.
* Made the team::xsi_sem_undo_requests int32 - due to padding, it would have
needed 4 bytes anyway; please always use specific types over int/short/long.
* xsi_sem_undo() now checks if it needs to do anything - the calls in team.cpp
no longer needs to do this.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26676 a95241bf-73f2-0310-859d-f6bbb57e9c96
vnode (falling back to synchronous I/O if the io() is not supported).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26672 a95241bf-73f2-0310-859d-f6bbb57e9c96
to provide asynchrounous (or only synchronous, if asynchronous is not
supported) I/O request support. It will eventually replace
{read,write}_pages(). None of the FS implementations implement them
yet.
* Implemented some support functions for request-based I/O. File system
implementations can use do_fd_io() which passes an I/O request to the
layer responsible for a given FD, and do_iterative_fd_io(), which
translates a request for a file to subrequests for the underlying
device and passes them on. Both fall back to synchrounous processing
when the io() hook is not supported.
Furthermore added vfs_synchronous_io() which should be handy for the
devfs to perform io_requests synchronously for devices that don't
support the io() hook.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26655 a95241bf-73f2-0310-859d-f6bbb57e9c96
- add 040 cpu and mmu stuff
- use leftover from the page root table to put interrupt vector table to set VBR to
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26627 a95241bf-73f2-0310-859d-f6bbb57e9c96
- rewrote early_query() to use the TT0 mapping to remove the page_hole stuff.
- fixed natfeat, using a page set up from the bootloader for now as it wants physical address. At least it's enough to see from the debugger:
load kernel...
kernel entry at 8003711a
Welcome to kernel debugger output!
Haiku revision: 26582
PANIC: unknown cpu_type 68040
Welcome to Kernel Debugging Land...
Running on CPU 0
kdebug>
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26599 a95241bf-73f2-0310-859d-f6bbb57e9c96
* As this was the last user of the READ_COUNT/WRITE_COUNT definitions in
vm_priv.h, I removed those as well.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26582 a95241bf-73f2-0310-859d-f6bbb57e9c96
It does its job by using part of libsupc++, with fake malloc and friends to make sure it won't double fault.
Works here, but cp-demangle must be extracted by hand from the lib, can't get the rule to work as I want, Ingo ?
Maybe using it directly without malloc hack would be ok with 16KB buffer, but I'm not sure of that.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26581 a95241bf-73f2-0310-859d-f6bbb57e9c96
fs_vnode_ops::write_pages() to be called with fsReenter = true. Since
this is no longer the case, the argument has become superfluous. For
read_pages() it always was. Removed the argument from the functions
and all functions that propagated it.
* Some whitespace at the end of lines was removed.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26579 a95241bf-73f2-0310-859d-f6bbb57e9c96
introduces the following relevant changes:
* VMCache:
- Renamed vm_cache to VMCache, merged it with vm_store and made it a
C++ class with virtual methods (replacing the store operations).
Turned the different store implementations into subclasses.
- Introduced MergeStore() callback, changed semantics of Commit().
- Changed locking and referencing semantics. A reference can only be
acquired/released with the cache locked. An unreferenced cache is
deleted and a mergeable cache merged when it is unlocked. This
removes the "busy" state of a cache and simplifies the page fault
code.
* Added VMAnonymousCache, which will implement swap support (work by
Zhao Shuai). It is not integrated and used yet, though.
* Enabled the mutex/recursive lock holder asserts.
* Fixed DoublyLinkedList::Swap().
* Generalized the low memory handler to a low resource handler. And made
semaphores and reserved memory handled resources. Made
vm_try_resource_memory() optionally wait (with timeout), and used that
feature to reserve memory for areas.
...
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26572 a95241bf-73f2-0310-859d-f6bbb57e9c96
bootloader's smp init and into its own unit.
ACPI tables can now generally be found with acpi_find_table(signature).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26538 a95241bf-73f2-0310-859d-f6bbb57e9c96
- bitfield definitions of page dirs were reversed... 040 is still wrong though.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26528 a95241bf-73f2-0310-859d-f6bbb57e9c96
- move part of mmu handling to mmu-dependant files and extend ops
- implemented 040 mmu init. doing so I spotted a bug in ARAnyM which ignored [ID]TT0. Linux likely doesn't use them but I was too lazy touse temporary page tables. I also noticed bitfields were in wrong order, to be fixed.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26527 a95241bf-73f2-0310-859d-f6bbb57e9c96
though until we use ACPI for proper PCI IRQ routing through the IO APIC.
Therefore the IO APIC code path is not yet enabled and the IO APIC isn't used.
ISA interrupts would work though, as would PCI interrupts if you'd hardcode
them for your specific configuration.
Note that this change also modifies some parts in the bootloader and in the PIC
setup to make local APICs available even on non-SMP systems. This causes APIC
timers to be used instead the normal PIT if it is available (also on non-SMP
configurations).
Also fixes some general errors in SMP and PIC code as well as some code cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26492 a95241bf-73f2-0310-859d-f6bbb57e9c96
This allows drivers to lock the memory outside of the original team context.
* create_area_etc() got a struct team as first argument, but that should have
been a team_id.
* Removed delete_area_etc() - there is already vm_delete_area() doing the same
thing.
* Renamed vm_get_address_space_by_id() to vm_get_address_space(), as there is
no other method of getting an address space.
* Removed erroneous white space.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26455 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Removed the superfluous "flags" parameter from ConditionVariable::Add()
that we forgot there when we moved the flags field from
ConditionVariableEntry::Add() to Wait().
* Using this method was therefore not a good idea - only UnixFifo did, though.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26454 a95241bf-73f2-0310-859d-f6bbb57e9c96
disk system lists.
* Added module watching; on module changes, it will now automatically rescan
the disk systems.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26368 a95241bf-73f2-0310-859d-f6bbb57e9c96
it clear when boot_splash_set_stage() must no longer be used.
* Free the memory associated with the kernel args before starting the
init process. Unlike the original TODO stated there are quite a few
more users of the kernel args (including the boot splash screen),
hence we can't really do that earlier, unless we decide to copy the
data over to the kernel heap.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26344 a95241bf-73f2-0310-859d-f6bbb57e9c96
It follows the semantics of the BFS R/W lock, though, that is, if you unlock
your write lock before the read locks, the read locks effectively become
write locks, too.
* Added a mutex_transfer_lock() function that will allow you to unlock a mutex
in a different thread than the one which locked it (only matters if KDEBUG
is enabled, though).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26316 a95241bf-73f2-0310-859d-f6bbb57e9c96
automatically selected at boot time. Pit and Apic timers are implemented
for now. Thanks Dustin!
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26265 a95241bf-73f2-0310-859d-f6bbb57e9c96
serve, bin sizes and page size. This minimizes the amount of "large"
allocations made in heaps that don't have a bin for the allocation size
(combining multiple pages). This is desirable as such large allocations
are generally pretty inefficient, and also because it separates larger from
smaller allocations better, making the chance of a heap becoming empty higher.
For now there are three heap classes "small", "large" and "huge", with a
predefined set of bin sizes for each. This might need some finetuning later on.
Reduce the grow size to 4MB though as the allocations should now be spread
across heap classes which each grow on their own.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26210 a95241bf-73f2-0310-859d-f6bbb57e9c96
the newly found disk systems.
* _ScanPartition() now allows to restrict the disk systems to a predefined set.
* _ScanPartition() now even scans partitions that already have a disk system
assigned; if a better one is found, the existing one is replaced. It will
ignore mounted or partitions with children, though.
* KPartition now also stores the priority of the disk system assigned to it.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26177 a95241bf-73f2-0310-859d-f6bbb57e9c96
- Use the platform object to determine the platform type in system_info.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26166 a95241bf-73f2-0310-859d-f6bbb57e9c96
per cache.
* Changed the strategy vm_cache_acquire_page_cache_ref() uses to ensure
that the cache isn't deleted while trying to get a reference. Instead
of the global cache pages hash table lock, it holds the global cache
list lock now. We acquire + release this lock in delete_cache() after
removing all pages and just before deleting the object.
* Some small optimizations using the property that the cache's pages are
ordered, now (vm_cache_resize(), vm_page_write_modified_page_range(),
vm_page_schedule_write_page_range()).
* Replaced some code counting a cache's pages by simply using
vm_cache::page_count.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26160 a95241bf-73f2-0310-859d-f6bbb57e9c96
D. Sleater. Also added a IteratableSplayTree class that extends
SplayTree, additionally maintaining a singly-linked list, thus allowing
for efficient forward iteration.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26159 a95241bf-73f2-0310-859d-f6bbb57e9c96
always returned B_OK) by a Init() method, which sets the initial size
and returns an error, if that fails.
* Adjusted code using the classes accordingly. Replaced a few
InitCheck() methods in the network code by Init().
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26127 a95241bf-73f2-0310-859d-f6bbb57e9c96
a flattened argument/environment buffer now. This simplifies the work
for the kernel a bit, since it can just copy the buffer and check
whether it looks OK instead of messing around with individual strings.
The runtime loader also gets a flattened array.
* Set the maximum size of the arguments/environment buffer to 128 KB.
When more arguments are passed, we fail with a proper error code
(instead of just truncating the arguments as before).
* On exec*() the first argument was silently replaced by the given path
name, which is not correct.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26119 a95241bf-73f2-0310-859d-f6bbb57e9c96
- remove unneeded include to make those usable by bootloader.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26117 a95241bf-73f2-0310-859d-f6bbb57e9c96
- kernel_m68K almost links now, jsut bails out on the linker script...
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26096 a95241bf-73f2-0310-859d-f6bbb57e9c96
- we'll just use decimal chip number (68030, ...) to identify cpu, fpu, and mmu for simplicity.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26041 a95241bf-73f2-0310-859d-f6bbb57e9c96
waiting for a heap grow.
* Use that nogrow version in the VM code to avoid a deadlock with the address
space lock when a grow operation would try to create an area while a malloc
happened from such a function in the VM.
* When waiting for a grow to happen, notify the waiting thread from the grower
also if it failed to allocate a new heap. Otherwise a thread would just sit
there and wait until another thread requested growing too and that one
succeeded (or just forever in the worst case).
* Make the dedicated grow heap growable too. If the current grow heaps run low
on memory it will instruct the grower to allocate a new grow heap. This
reduces the likelyhood of running out of memory with no way to grow to a
minimum. As the growing is done asynchronously it is still possible to
happen, but it is highly unlikely as the grow heap is solely used to
allocate memory in the process of creating new heap areas and it will even
try using normal public memory if the dedicated memory has run out.
* Reduced the dedicated grow heap from 2 to 1MB. As it can now grow itself, it
doesn't need to last so long.
* Extract heap creation into it's own function that does area creation and heap
attach and use this function for growing normal and grow heaps.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26009 a95241bf-73f2-0310-859d-f6bbb57e9c96
and remove the then unneeded mutex_init() for them.
* Remove the workaround for allowing uninitialized mutexes on kernel startup.
As they are all initialized statically through the MUTEX_INITIALIZER() now
this is not needed anymore.
* An uninitialized mutex will now cause a panic when used to find possibly
remaining cases.
* Remove now unnecessary driver_settings_init_post_sem() function.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25812 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Cleanup the license header and add authors
* Sort the available keymaps list in the config file and add 'dv'
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25806 a95241bf-73f2-0310-859d-f6bbb57e9c96
keymap there too.
* Add a config header where one can select what KDL keymap should be used
(currently only 'us' and 'sg' are available though).
* Provide a third keymap that is used when the alt modifier is used (the swiss
german keymap is pretty useless without alt as all the useful keys like
backslash and curly braces use alt).
Our KDL is so powerful and nice to use, the only thing that bothered me was
that I always had to think about where some of the special keys are located in
the US keymap. So this simple compile-time keymap switching provided to be
helpful for me and might be for others too. Keymaps for other layouts obviously
have to be written before this becomes really useful.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25803 a95241bf-73f2-0310-859d-f6bbb57e9c96
be put into a boot_item in frame_buffer_console_init().
* The VESA driver now supports gettings the EDID information as well; this
is necessary now, since the app_server no longer takes over the mode the
boot loader had chosen.
* Note, we might want to do this via vm86 instead in the future, and remove
the kernel part again.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25786 a95241bf-73f2-0310-859d-f6bbb57e9c96
file for hpet implementation. Not yet added to the build.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25773 a95241bf-73f2-0310-859d-f6bbb57e9c96
B_DEBUG_SPINLOCK_CONTENTION is defined to 1. It typedefs spinlock to a
structure (thus breaking BeOS binary compatibility), containing a
counter which is incremented whenever a thread has to wait for the
spinlock.
* Added macros for spinlock initialization and access and changed
code using spinlocks accordingly. This breaks compilation for BeOS --
the macros should be defined in the respective compatibility wrappers.
* Added generic syscall to get the spinlock counters for the thread and
the team spinlocks.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25752 a95241bf-73f2-0310-859d-f6bbb57e9c96
pipes in the shell, though the semantics is a little different: The
second command is invoked whenever the first command has written a
complete line. The line is passed as last argument to the second
command. The new command flag B_KDEBUG_PIPE_FINAL_RERUN causes the
second command to be invoked again (with NULL argument) after the
first command is done.
* Added kprintf_unfiltered() and kputs_unfiltered() which bypass the
pipe mechanism and directly print to the bluescreen/serial output.
* Moved most commands from debug.cpp to the new
debug_builtin_commands.cpp.
* B_KDEBUG_DONT_PARSE_ARGUMENTS commands don't get an argument anymore,
if it would consist of white space only.
* Added new debugger command return value B_KDEBUG_ERROR, which
indicates that executing the command failed. This return code will
abort a complete pipe.
* Since debugger commands can nest (i.e. one command can invoke another
one) the setjmp()/longjmp() mechanism to restore the stack after a
page fault in a command needs more than one jump buffer.
* Added abort_debugger_command(), which longjmp()s out of the currently
executed command. This will also abort the current pipe.
* When pagination is enabled pressing "a" will abort the running command
(as opposed to "q" which only disables the blue screen output, but
lets the command continue).
* Added debugger commands:
- "grep" which can be used to filter output by pattern. Removed the
"filter" command and the underlying mechanism that did that before.
- "head" which prints only the first lines of output of another
command.
- "wc" counts lines, words, and characters of another command's
output.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25744 a95241bf-73f2-0310-859d-f6bbb57e9c96
remains. This replaces the previous mechanism of switching the thread to
a dedicated death stack. We might consider moving more cleanup work to
the undertaker, but that seems a little more involved.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25704 a95241bf-73f2-0310-859d-f6bbb57e9c96
than a semaphore, and can already be used in the early boot process.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25689 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Adjusted code using recursive locks respectively. The initialization
cannot fail anymore, and it is possible to use recursive locks in the
early boot process (even uninitialized, if in BSS), which simplifies
things a little.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25687 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Use vm86 mode to call the VESA BIOS to do the actual mode switching by
providing an ioctl in the vesa driver.
* Fix vm86.h.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25680 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Moved devfs from fs/ to device_manager/, and separated the legacy driver
support from it.
* Removed fast_log module.
* There are a couple of (temporary) regressions, though:
- legacy SATA and ISA IDE support is disabled, the drivers haven't been
ported yet.
- The not yet used ATA bus manager hasn't been ported yet, either.
- AHCI changes have not been tested.
- the listdev command has been removed from the build (as it currently
doesn't work anymore).
- device manager generated IDs currently are not freed anymore when a device
node is removed.
- generic drivers can't yet use the new driver architecture.
- simple busses that do not support device types won't work yet.
- legacy driver publishing/unpublishing (ie. what USB needs) has not been
tested, and may be broken.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25662 a95241bf-73f2-0310-859d-f6bbb57e9c96
vm_page_write_modified_pages(), save that it only writes pages in the
given range.
* Added vm_page_schedule_write_page_range() which schedules all modified
pages in the given cache's range for writing by the page writer.
* Added _kern_sync_memory() syscall and the msync() POSIX function.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25620 a95241bf-73f2-0310-859d-f6bbb57e9c96
* The new function vm86_do_int(struct vm86_state *state, uint8 vec) provides a
facility to call BIOS interupt handlers. The function must only be called from
a user thread context because the lower 1MB of the address space is used.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25610 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Add a "fault_callback" to the thread structure which is called when a
unhandled page fault happens in user space. A SIGSEGV will only be sent
if the callback returns "true".
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25609 a95241bf-73f2-0310-859d-f6bbb57e9c96
* In vm86 mode CS will have arbitrary values so we check for both USER_CODE_SEG
and the VM flag in EFLAGS. This is also done when entering interrupt gates.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25607 a95241bf-73f2-0310-859d-f6bbb57e9c96
compatible with what our code assumed (pointers to objects of
TraceEntry and its POD base class trace_entry aren't identical
anymore).
* Added optional stack traces for ktrace_printf() output in the kernel.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25531 a95241bf-73f2-0310-859d-f6bbb57e9c96
Changed condition variables so that it is allowed to block (e.g. lock
mutexes etc.) between Add() and Wait(). This fixes#2059, since the
block writer used them this way and could thusly fail to wait for a
condition variable, causing a temporary stack object to be used past its
lifetime.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25525 a95241bf-73f2-0310-859d-f6bbb57e9c96
to contain headers shared by kernel and userland (mainly libroot).
* Moved quite a few private kernel headers to the new location. Split
several kernel headers into a shared part and one that is still kernel
private. Adjusted all affected Jamfiles and source in the standard x86
build accordingly. The build for other architectures and for test code
may be broken.
* Quite a bit of userland code still includes private kernel headers.
Mostly those are <util/*> headers. The ones that aren't strictly
kernel-only should be moved to some other place (maybe
headers/private/shared/util).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25486 a95241bf-73f2-0310-859d-f6bbb57e9c96
address space that is fully locked and marked B_KERNEL_AREA. It can
thus be accessed by the kernel without additional checks.
* For each userland thread we do create a user_thread structure in that
area. The structure is accessible from userland via TLS, using the
private get_user_thread() function.
* Introduced private userland functions [un]defer_signals(). They can be
used to cheaply disable/re-enable signal delivery. They use the
user_thread::defer_signals/pending_signals fields which are
checked/updated by the kernel.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25451 a95241bf-73f2-0310-859d-f6bbb57e9c96
changes to the area (delete, resize, clone) from userland.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25450 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added BDiskDeviceRoster::GetDiskSystem() method, that can get a disk system
by short/pretty/module name - since they should all be unique, I put them
in a single namespace, please complain if you don't like that :-)
* Cleaned up DiskSystem.h and DiskDeviceRoster.h according to the updated
header guidelines.
* Renamed ntfs pretty name from "ntfs File System" to "Windows NT File System".
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25414 a95241bf-73f2-0310-859d-f6bbb57e9c96
arguments they get a single thread_creation_attributes structure now.
* Added stack_address and stack_size to thread_creation_attributes,
which allow to specify the stack size or the stack to be used for the
new user thread.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25389 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Fixed operator=(): the second argument of SetTo() is a boolean (normalize),
not the length of the buffer.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25382 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Changed the semantics of unnamed semaphores. Before parent and child
of a fork() would always share an earlier created semaphore. Now we do
that only, if the "shared" parameter of sem_init() was true. That's
still not quite the behavior Linux and Solaris have, but should be
perfectly fine with how reasonable code would use the API.
* There's a global table for shared unnamed semaphores now. ATM a
semaphore is leaked when no one explicitly destroys it (just as with
named sems).
* Enforce per-team and global semaphore number limits.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25362 a95241bf-73f2-0310-859d-f6bbb57e9c96
not supposed to be passed to pathconf() or sysconf().
* Added POSIX semaphore related macros.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25361 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Allow userland teams to create areas below 1 MB when requested specifically.
* Note, this is a temporary solution - see the comments in the code.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25358 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Renamed the old kernel_posix[_arch...].o to kernel_lib_posix...
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25336 a95241bf-73f2-0310-859d-f6bbb57e9c96
Realtime option group). The implementation should be complete, but is
totally untested yet.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25326 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Trivial adjustments of code using mutexes. Mostly removing the
mutex_init() return value check.
* Added mutex_lock_threads_locked(), which is called with the threads
spinlock being held. The spinlock is released while waiting, of
course. This function is useful in cases where the existence of the
mutex object is ensured by holding the threads spinlock.
* Changed the two instances in the VFS code where an IO context of
another team needs to be locked to use mutex_lock_threads_locked().
Before it required a semaphore-based mutex implementation.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25283 a95241bf-73f2-0310-859d-f6bbb57e9c96
that can unlock the mutex, so one bit is sufficient.
* Added cutex_init_etc() which has an additional "flags" parameter.
The only specifyable flag is CUTEX_FLAG_CLONE_NAME, which causes the
function to strdup() the given name and free() its copy in
cutex_destroy().
* cutex_destroy() does now unblock waiting threads.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25280 a95241bf-73f2-0310-859d-f6bbb57e9c96
name, couldn't resist :-P). It's semantically equivalent to a mutex,
but doesn't need a semaphore (it uses thread blocking and a simple
queue instead). Initialization can't fail. In fact it is ready to use
without initialization when living in the bss segment, also in the
early boot process. It's as fast as a benaphore in cases of low lock
contention, and faster otherwise. Only disadvantage is the higher
immediate memory footprint of 16 bytes.
* Changed how the "thread" and "threads" debugger commands list the
objects they are waiting for. Cutexes are also included.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25276 a95241bf-73f2-0310-859d-f6bbb57e9c96
the selecting thread, which has obviously no effect.
* Changed select_info::events to vint32. It is now updated atomically.
This removes a race condition when concurrent threads would notify at
the same time.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25273 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Made the pointers const.
* Changed how the ARP module maintains its arp_entry::request_buffer: it
now uses the atomic_pointer*() functions to make sure there is no race
condition, and it's deleted only once.
* Getting an ARP entry would return uninitialized data, if the entry hadn't
been resolved yet.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25263 a95241bf-73f2-0310-859d-f6bbb57e9c96
64-bit safe version of atomic_test_and_set() for pointers:
atomic_pointer_test_and_set().
* The VFS is now using this function (it's not used anywhere else in the
kernel this way).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25260 a95241bf-73f2-0310-859d-f6bbb57e9c96
* cache paranoia was always enabled.
* Changed from paranoia on/off to levels. Adjusted the macros to take a
level argument.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25215 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added "mode" parameter to set_paranoia_check(), which specifies
whether the check is supposed to already exist/not exist yet. This
allows for, as it turns out, very useful additional tests. Added
{ADD,UPDATE}_PARANOIA_CHECK macros that imply the used "mode"
parameter.
* PARANOIA_SLOT_COUNT was accidentally redefined in the source file.
* Fixed remove_paranoia_check(). It didn't remove anything.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25207 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added capture_tracing_stack_trace() which allocates space in the
tracing buffer and captures the stack trace according to the given
parameters.
* Added TraceOutput::PrintStackTrace() to print a stack trace thus
created.
* Added TraceEntry::DumpStackTrace() callback which is supposed to print
a stack trace for the entry, if it can do that.
* Added "--stacktrace" switch to the "traced" command, which causes the
stack traces for all entries that have one to be printed as well.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25205 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added support for non-published condition variables. One has to call
Init() on those, and add entries directly with the
ConditionVariable::Add() method.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25110 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Made the object pointer passed to thread_prepare_to_block() const, so
that strings can be passed without casting. Passing a string could
maybe be made a convention for THREAD_BLOCK_TYPE_OTHER.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25109 a95241bf-73f2-0310-859d-f6bbb57e9c96
respective Private* base class.
* Changed sigwait() and sigsuspend() to use thread_block() instead of a
condition variable.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25100 a95241bf-73f2-0310-859d-f6bbb57e9c96
thread_block(), thread_unblock(),...) that allow a thread to wait for
something without needing a semaphore or condition variable. It can
simply block and another thread can unblock it. Supports timeouts and
interrupting. Both semaphores and condition variables use this
common mechanism, now.
* Semaphores:
- Some simplifications due to the thread blocking mechanism.
- Changed locking order to sem -> thread. It was the other way around
before and when introducing the wait_for_objects() support I had
also introduced a situation where the locking was reverse, which
could potentially cause a dead lock on SMP systems.
- Instead of queueing thread structures, a semaphore queues
queued_thread entries now, which are created on the stack. The
thread::sem structure could thus be removed.
- Added sem_entry::net_count, which is sem_entry::count plus the
acquisition count of all waiting threads. This number is needed in
remove_thread_from_sem() and instead of computing it there we
maintain it.
- Fixed remove_thread_from_sem(). It would not unblock threads, if
the sem count was <= 0.
- Made sem::last_acquirer unconditional. It is actually needed for
sem_info::latest_holder. Fixed fill_sem_info() accordingly.
- Added some optional tracing output, though only via ktrace_printf().
* Condition variables:
- Could be simplified significantly through the use of the thread
blocking mechanism. Removed a good deal of unnecessary code.
- Moved the ConditionVariableEntry "flags" parameter from Wait() to
Add(), and adjusted all places where condition variables are used
accordingly.
* snooze() uses thread_block_with_timeout() instead of a semaphore.
* Simplified thread interrupting in the signal and user debugger code.
Instead of separate functions for threads waiting on a semaphore or
condititon variable, we only have a single thread_interrupt(), now.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25099 a95241bf-73f2-0310-859d-f6bbb57e9c96
- If the hook of the timer we're cancelling is currently being
executed, we do now wait till it is finished. This is how the BeBook
specifies the function to behave.
- Periodic timers would not be cancelled, if their hook was being
invoked at the same time, since they weren't in the queue during
that time.
- Since we know the CPU on which the timer is scheduled (timer::cpu),
we don't have to look through any other CPU queue to find it.
- Fixed the return value. It should report whether the timer had
already fired, and was not always doing that.
* Added private add_timer() flag B_TIMER_ACQUIRE_THREAD_LOCK. It causes
the thread spinlock to be acquired before the event hook is called.
cancel_timer() doesn't wait for timers with the flag set. Instead we
check in the timer interrupt function after acquiring the thread
spinlock whether the timer was cancelled in the meantime. Calling
cancel_timer() with the thread spinlock being held does thus avoid any
race conditions and won't deadlock, if the event hook needs to acquire
the thread spinlock, too. This feature proves handy for some kernel
internal needs.
* The scheduler uses a B_TIMER_ACQUIRE_THREAD_LOCK timer now and
cancel_timer() instead of the no longer needed
_local_timer_cancel_event().
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25098 a95241bf-73f2-0310-859d-f6bbb57e9c96
kernel and added a WrapperTraceFilter* parameter, which allows for
additional filtering. This way other commands can print tracing output
with special filtering.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25094 a95241bf-73f2-0310-859d-f6bbb57e9c96
variable at once. It wasn't used anymore, and the code gets simpler.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25080 a95241bf-73f2-0310-859d-f6bbb57e9c96
ones) for wait_for_child(), which is notified when any job control
condition (child dead, stopped, continued) occurs. These events are
relatively rare anyway, and it simplifies the code.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25079 a95241bf-73f2-0310-859d-f6bbb57e9c96
to port_buffer_size_etc(), but returns the info through a structure,
which also identifies the sender (uid, gid, team ID) of the message.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25003 a95241bf-73f2-0310-859d-f6bbb57e9c96
and defines the macros needed by them.
* Renamed syscall sys_vm_map_file() to _kern_map_file() and changed the
path to an FD parameter. Changed vm_map_file() accordingly and
adjusted the kernel ELF loader and the runtime loader.
* Added syscall _kern_unmap_memory().
* Added bool unmapAddressRange parameter to vm_create_anonymous_area()
and map_backing_store(). If true and the address specification is
B_EXACT_ADDRESS, all areas in the specified address range will be
deleted (unless an area is covered only partially).
* Introduced B_SHARED_AREA flag, which is set on areas that have been
created by {vm,_user}_map_file() with REGION_NO_PRIVATE_MAP. When
fork()ing those areas won't be copied CoW, but rather be cloned. This
is needed for mmap() MAP_SHARED.
* {vm,_user}_map_file() also accept an FD argument < 0, in which case an
anonymous area is created.
* Implemented mmap() and munmap(). Currently there's the restriction
that we can't partially unmap areas. Otherwise the functions should be
rather compliant. We also support the non-POSIX extension
MAP_ANONYMOUS.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24964 a95241bf-73f2-0310-859d-f6bbb57e9c96
That would explain why syscall restarts were broken. In fact there's no
reason to check the flag at all, since we know we set it.
ftp appears to work again.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24918 a95241bf-73f2-0310-859d-f6bbb57e9c96
ATM.
* Changed common_fcntl() to also work for non-vnode-based FDs. Only the
operations that require a vnode do fail now. F_SETFL uses the new
fd_ops::set_flags() if available, falling back to the vnode respective
operation.
* Changed some direct accesses to file_descriptor::u::vnode. It was safe
in those cases, but might not be anymore if we ever change fd_vnode().
ftp can at least connect to servers again, now, but apparently we still
have a problem with syscall restarts -- downloads fail after one second,
when the timer goes off.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24917 a95241bf-73f2-0310-859d-f6bbb57e9c96
syscall_restart_ioctl_is_restarted() to syscall_restart_is_restarted,
IoctlSyscallFlagUnsetter to SyscallFlagUnsetter, and
IoctlSyscallRestartWrapper to SyscallRestartWrapper, as they are no
longer only used for ioctl().
* Removed unused syscall_restart_ioctl_handle_post().
* Made SyscallRestartWrapper a lot fancier. Instead of storing a
reference to the result value, it stores the value itself, and it
features all the interesting operators that make it appear like that
value. This simplifies the use of the class quite a bit.
* THREAD_FLAGS_SYSCALL is now set for all socket function and the
read[v](), write[v]() syscalls.
* Added is_syscall() function and net_stack hook to the net stack.
* Removed "kernel" parameter from all net_stack_interface and net_socket
module hooks. They aren't need any longer, since is_syscall() can be
used instead.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24914 a95241bf-73f2-0310-859d-f6bbb57e9c96
- The net_stack driver is no longer used. Instead we have a kernel
module which is directly used by syscall implementations in the
kernel. I.e. we no longer tunnel those functions through ioctls, but
have normal syscalls.
- Removed the superfluous net starter module.
- Implemented the FDTYPE_SOCKET type file_descriptors, that is sockets
are no longer vnode based.
- Adjusted libnetwork (the socket function implementations)
accordingly.
- Adjusted netstat accordingly.
* Socket module:
- Implemented socketpair().
- Added "kernel" parameter to the control hook. Quite a few more hooks
would actually need the parameter, but I didn't change those yet,
since that would probably also require changes to the protocol
module interface.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24908 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Revised the RLE algorithm used for compressing the boot splash artwork to
handle uncompressed runs.
* Compress the RGB channels separately for improved efficiency.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24844 a95241bf-73f2-0310-859d-f6bbb57e9c96
FIFO. Reimplemented pipe() to use it.
* pipefs is no longer mounted. Will remove the superfluous code soon.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24823 a95241bf-73f2-0310-859d-f6bbb57e9c96
- Moved most file_system_module_info hooks into separate structures.
Those that operate on mounted volumes to fs_volume_ops, those
operating on a vnode to fs_vnode_ops.
- Got rid of the fs_volume, fs_cookie, fs_vnode typedefs. We use void*
again.
- Instead of a void* volume and node cookie hooks are passed a
fs_volume and fs_vnode structure pointer, which contain the cookie
and an ops pointer (fs_volume a few more things).
- The VFS {new,publish,get,...}_vnode() functions take a fs_volume*
instead of the volume ID. So does vfs_get_fs_node_from_path().
- Added type and flags arguments to publish_vnode() and the
get_vnode() hook and removed the type argument from lookup() hook.
Added vnode::type using formerly unused bits to store the node type.
Simplified a few things in the VFS due to the now always available
node type.
- Added fs_volume_ops::{create,delete}_sub_vnode() and
fs_vnode_ops::get_super_vnode() hooks. They are used to support file
system layers, e.g. allowing to extend an FS not supporting BeOS
attribute with attribute support. Needs some more work in the VFS.
- Added fs_vnode_ops::create_special_node() hook for creating special
nodes (e.g. FIFOs).
* Adjusted the built-in file systems and BFS according to the interface
changes. Removed all other FSs from the image for the time being.
We'll see whether further API changes are necessary before porting
them.
* Adjusted the bfs_shell accordingly.
* Implemented create_special_node() in rootfs to support special nodes.
* Added support for FIFOs:
- Added syscall _kern_create_fifo() (used by mkfifo()), which creates
a special node (type S_IFIFO) in the respective file system.
- When a special node is published the VFS creates a respective sub
node. Currently only FIFOs are supported.
- Added a little support for FIFO subnodes by using functionality from
the pipefs.
- Added mkfifo to the image. It can create FIFOs in the rootfs, but
the FIFOs aren't really usable ATM, since they still work like
pipes, i.e. readers and writers need to have them open at the same
time.
* Some smaller changes in the VFS:
- Made the *_CALL macros nicer to use (vargs).
- Refactored FS entry lookup into new function lookup_dir_entry().
- create_vnode() no longer just calls the FS create() hook. First it
looks up the entry and uses open_vnode(), if it already exists. This
is necessary for two reasons: 1) The FS might not support create()
while still allowing to open() entries. 2) When the FS has other
layers on to of it (or the respective node) it might not be
responsible for opening the node.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24816 a95241bf-73f2-0310-859d-f6bbb57e9c96
and ino_t instead of a path. Supposed to work with node monitoring messages.
Took the name from vfs_entry_ref_to_path() that takes the same arguments, but
suggestions for a better name are welcome.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24813 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Implemented RLE compression for the boot splash images, resulting in
smaller kernel and boot loader.
* Only the boot loader contains the RLE compressed images, the decompressed
buffer for the icons is passed to the kernel via kernel args.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24812 a95241bf-73f2-0310-859d-f6bbb57e9c96
The dividing line is back although with a little more spacing. Also the icon
spacing is a little increased and I added a subtle outline as well as a little
brighter background for the active icon look. The placement logic is now not
independant of each other anymore, otherwise I couldn't center both images
as a unit. But only the vertical placement is affected.
Comments as always on the commit mailing list... :-)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24796 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added {Create|Delete}Device() analogous to {Create|Delete}FileDevice
* Added a small DeviceWatcher class that reacts to entry creation/removal
* Implemented a way to start/stop node monitoring
* Start watching for devices after the boot volume has been mounted and the
the second initial scan was run
The disk device manager now creates and scans a device when a "raw" node is
published and deletes the device on removal. This makes hot-plugging of disk
devices (for example memory sticks using usb_disk) work. Their partitions will
be scanned and published so they can be mounted. Somehow the removal of the
partitions does not yet work however, any insights are welcome.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24777 a95241bf-73f2-0310-859d-f6bbb57e9c96
the icons are centered.
* The boot loader and kernel now use the placement info that
generate_boot_screen now generates.
* Made the code that draws the images handle the case where any of the images
is larger than the frame buffer.
* All drawing functions need to know the image width (analogous for bytes per
row).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24773 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Not sure if it works as intended, as the specs are a bit vague.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24717 a95241bf-73f2-0310-859d-f6bbb57e9c96
item entry.
* The bios_ia32 video platform code now stores the available VESA modes in
the new vesa_modes kernel_args field.
* When configuring a VESA mode via settings file, it's no longer needed to
specify the exact mode - the closest available mode is now used. This should
help with bug #1962.
* frame_buffer_console_init() now also creates a boot_item for the VESA modes
in the kernel_args.
* The VESA accelerant now filters the mode list to only contain modes that
are actually supported.
* Moved non-shared vesa driver data into its own file vesa_private.h.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24675 a95241bf-73f2-0310-859d-f6bbb57e9c96
- Added a "root" vnode to the io_context. It is used for resolving
paths and converting nodes to paths instead of sRoot. Some more
passing around of io_context structures was necessary.
- Introduced a new lock sIOContextRootLock to protect
io_context::root. The current uses of io_context::io_mutex
(put_vnode(), remove_vnode() while holding it) looked too suspicious
to use that mutex in vnode_path_to_vnode().
- Added _kern_change_root() syscall and chroot() libroot function.
- Added chroot coreutils program to the image. Funnily it seems to be
much easier to set up a little jail than under Linux (just copy
bash and libroot.so into respective subdirs; mount another pipefs
if you want pipe support).
With Haiku allowing direct access to directories via inode IDs
jailing is obviously not very secure at the moment.
- Added /var/empty to the image. It will be the chroot target for ssh.
* Changed vfs.cpp:get_cwd() so that the io_context::io_mutex is no
longer held when calling dir_vnode_to_path().
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24673 a95241bf-73f2-0310-859d-f6bbb57e9c96
- The kernel stores the group IDs in the team structure. They are
correctly inherited on fork() and load_image_etc().
- Implemented getgroups() for real, i.e. it retrieves the groups
associated with the process.
- Implemented setgroups(), initgroups() and (the BSDish)
getgrouplist(). The latter two read the group information from the
"group database" /etc/group (if existing).
- Change the BIND port config, since we do have getgrouplist() now.
* The set-uid feature was broken when the path to the executable was
relative, since we used stat(), which, in the kernel, uses the kernel
IO context.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24669 a95241bf-73f2-0310-859d-f6bbb57e9c96
reference counted memory allocations. Can be used for sharing immutable
structures.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24666 a95241bf-73f2-0310-859d-f6bbb57e9c96
finally created a solution to avoid that: Header files that contain
configuration settings (and nothing else) go to build/config_headers.
To change settings, create a directory build/user_config_headers (which
is ignored by svn), copy the respective header there and modify it at
your leisure. Currently only tracing_config.h has been moved to the new
location, but more files will follow eventually. It is also recommended
to move optional macro definitions in Jamfile (as for BFS) to a config
header instead; the build system will then automatically rebuild on
changes.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24611 a95241bf-73f2-0310-859d-f6bbb57e9c96
a call chain contains a specific symbol (or address).
* Added a new KDL command "calling" that you can use to get a list of
threads that have a specific function in their call chain.
* Removed extraneous white space.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24594 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Add a cached_pages field to the system_info structure, and change the
meaning of the used_pages field to not include cached pages.
* Provide the needed info using the new calls vm_get_available_memory(),
and vm_page_num_available_pages().
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24571 a95241bf-73f2-0310-859d-f6bbb57e9c96
- Take extended family and model into account when generating the cpu
type and revision.
- Added Intel Core 2 Extreme to the cpu list.
Please review.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24509 a95241bf-73f2-0310-859d-f6bbb57e9c96
* The boot splash code now checks wether debug screen output is enabled or not
using the above function.
* The boot splash code no longer maps it's own copy of the frame buffer, instead,
it will use the boot item feature as the VESA driver does. Also removed the
lock, as that's not needed at all.
* Renamed splash.cpp to boot_splash.cpp, and boot/splash.h to boot_splash.h
(it's not part of the boot loader, but the kernel).
* Removed dead code from boot_splash.cpp, added license. Replaced license
header in boot_splash.h to a style guide conforming one.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24489 a95241bf-73f2-0310-859d-f6bbb57e9c96
executable permissions of the file by hand. We use _kern_access()
instead, which also handles the root case correctly.
* The user and group arguments of test_executable() aren't needed any
longer.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24483 a95241bf-73f2-0310-859d-f6bbb57e9c96
