at the override entry to trigger the overriden vector so that we don't need
to configure any additional redirections.
* Also configures the polarity and trigger modes found in the override entry.
* When disabling the legacy PIC, retrieve the enabled interrupts and re-enable
then in the IO-APIC. This will for example make the ACPI SCI work that is
installed prior to switching interrupt models. Through the transparent support
for interrupt source overrides it'll also automatically relay from the old to
the new vector.
This should make ACPI interrupts work and should support relocating the ISA PIT
from irq 0 to a different global system interrupt (usually 2) so that it can
still work when IO-APICs are in use.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41528 a95241bf-73f2-0310-859d-f6bbb57e9c96
all reports so far have been positive. We fall back to legacy mode in the cases
where we can't figure out the correct routing.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41527 a95241bf-73f2-0310-859d-f6bbb57e9c96
* remove device_type and replace with device_chipset
* change MEMSIZE to >> 10 as r600-r700 store this in bytes (r800 uses MB and will be fixed soon)
* add if statement to select what register locations to use based on chipset
** Maybe use a struct or something to store these in a standardized way?
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41525 a95241bf-73f2-0310-859d-f6bbb57e9c96
* move system_revision.h to headers/private/libroot
* unify libroot's get_system_revision() (the one I introduced recently) with kernel's
get_haiku_revision(), the function is now called get_haiku_revision() in the kernel
and __get_haiku_revision() in libroot
* system_revision.c is now being built as part of libroot and as part of the kernel
* adjusted all callers of get_system_revision() accordingly
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41516 a95241bf-73f2-0310-859d-f6bbb57e9c96
* add private function get_system_revision() for accessing the
revision string
* adjust uname to use get_system_revision
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41479 a95241bf-73f2-0310-859d-f6bbb57e9c96
at all and, since there can be multiple IO-APICs, we need to do the
enumeration again in the kernel anyway. Also only set ioapic_phys the first
time we encounter an IO-APIC object as it looks cleaner when we arrive at the
first IO-APIC default address.
* Therefore we don't have to worry about already mapped IO-APICs when
enumerating them in the kernel.
* Also remove the mapping function that is now not used anymore.
* We still use the ioapic_phys field of the kernel args to determine whether
there is an IO-APIC at all to avoid needlessly doing the enumeration again.
This fixes multi IO-APIC configurations, because before we would indeed map
the last IO-APIC listed in the MADT, but then in the kernel assumed we mapped
the first one. We'd end up with mapping the last listed IO-APIC twice and the
first IO-APIC never, always programming the last one when we actually targetted
the first one.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41476 a95241bf-73f2-0310-859d-f6bbb57e9c96
mark the ISA interrupts as unusable and then use ioapic_is_interrupt_available
to determine if that vector is possibly taken by an IO-APIC. If IO-APICs are
not used, this will simply always return false, leaving all vectors free for
MSI use.
* The msi_init() now has to be done after a potential IO-APIC init, so it is now
done after ioapic_init() instead of inside apic_init().
* Add apic_disable_local_ints() to clear the local ints on the local APIC once
we are in APIC mode (i.e. the IO-APIC is set up and we don't need the external
routing anymore).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41445 a95241bf-73f2-0310-859d-f6bbb57e9c96
functional change intended.
* Use an appropriately sized sLevelTriggeredInterrupts for each controller type.
This also fixes an out of bound access for IO-APICs with more than 32 entries
and also returns the right mode in such cases.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41426 a95241bf-73f2-0310-859d-f6bbb57e9c96
* the length of the sHaikuRevision character array symbol needs to be set explicitly,
as using either _SYS_NAMELEN or sizeof(utsname::version) will only return the values
for the host, which may not match ours, thus potentially causing problems when using
sHaikuRevision
* add headers/private/system_revision.h which defines SYSTEM_REVISION_LENGTH to 128
* adjust definitions of sHaikuRevision in libroot and kernel accordingly
utsname::version is shorter than SYSTEM_REVISION_LENGTH, but that doesn't cause any harm
until we have indeed switched to a DVCS (in which case longer revision strings will be
cut off by 'uname').
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41421 a95241bf-73f2-0310-859d-f6bbb57e9c96
* add boot item support to radeon hd driver
* add edid storage to shared info
* add pull of active monitor VESA EDID to radeon hd driver (until AtomBios complete)
* EDID pulled in driver now passed to create_display_modes
* move registers to external stock xorg radeon hd register headers (lic. allows it)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41411 a95241bf-73f2-0310-859d-f6bbb57e9c96
* length of utsname members must stay at length of 32
This will work just the same for now. When using a DVCS yields longer revisions, we need to adjust AboutSystem to fetch the full revision directly from the ELF section '_haiku_revision' (as found in libroot.so or libbe.so).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41392 a95241bf-73f2-0310-859d-f6bbb57e9c96
* increase _SYS_NAMELEN defined in sys/utsname.h to 128 to allow long(ish) revisions
* sHaikuRevision is now a static character array (in both libroot and kernel)
* adjust build tool set_haiku_revision to write the revision as string
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41389 a95241bf-73f2-0310-859d-f6bbb57e9c96
from settings retrieved through get_{current|possible}_resources().
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41382 a95241bf-73f2-0310-859d-f6bbb57e9c96
turns out to be flaky, is a little bit of a hack anyway and performs unnecessary
operations. The functionality is now handled kernel side which optimizes those
problems away.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41372 a95241bf-73f2-0310-859d-f6bbb57e9c96
IO-APIC can be easily enabled to test it on various configurations. Note that
the previous default opt-out didn't work because the safemode options would not
be touched at all when not actually entering the boot menu.
Once IO-APIC is more broadly tested this can be removed again and the opt-out
option reenabled.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41370 a95241bf-73f2-0310-859d-f6bbb57e9c96
the base bus number and segment which is what we're using them for. It should
work generically, however I only tested it to look up PCI bridge devices.
The logic is a subset of what is done in AcpiEvPciConfigRegionSetup when setting
up the operation region for a PCI device.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41365 a95241bf-73f2-0310-859d-f6bbb57e9c96
the cached pci_info and writes the new value into PCI config space. Drivers
using either mechanism to enumerate devices will therefore get the updated
value.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41364 a95241bf-73f2-0310-859d-f6bbb57e9c96
layout API, we probably can just phase it out after a while.
* Introduced new constructors, and added missing flags to one of them to make
it more convenient to use.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41350 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Some automatic whitespace cleanup.
This makes the interrupt model change via kernel actually work.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41340 a95241bf-73f2-0310-859d-f6bbb57e9c96
* ACPI module now has a get_possible_resources function.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41320 a95241bf-73f2-0310-859d-f6bbb57e9c96
* add SetRawString() to both implementations of DefaultCatalog which sets
the translated string as given
* use SetRawString() in both (standard- and build-)versions of linkcatkeys
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41167 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Disallow renaming of entries with localized names for now - this is meant to be temporary - and so far only in Tracker's Info window. Renames do not result in a change, visually, as the localized name hides the real name, and results in a bad user experience. One could possibly allow renames of the localized name, writing it back to the catalog. I've experimented with using BCatalogAddOn::SetString() but haven't been able to make it stick yet.
* Disallow renaming Trash in Tracker's Info window via Command-E.
* Adjust the argument order of BLocaleRoster::GetLocalizedFileName().
* Add a BLocaleRoster::GetLocalizedFileName() variant to look up another app's name given its signature and unlocalized, canonical name.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41126 a95241bf-73f2-0310-859d-f6bbb57e9c96
- context menu of the replicant dragger. Fixes#7363;
- default <empty> menu placeholder. Fixes#7072;
- other messages used in PrintJob, Dragger and ZombieReplicantView classes.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40991 a95241bf-73f2-0310-859d-f6bbb57e9c96
alternating account names (once AccountName_1 the other time just
AccountName).
Sort accounts by creation time. This fix the order in mail
preferences.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40983 a95241bf-73f2-0310-859d-f6bbb57e9c96
Updated m4 to 1.4.16.
Also updated the builds of sed and yasm.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40957 a95241bf-73f2-0310-859d-f6bbb57e9c96
quadratic solver if multiple Areas are in the same column/row.
- Replace GetString by ToString.
- some clean up
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40941 a95241bf-73f2-0310-859d-f6bbb57e9c96
* add a INTEL_TYPE_915M type to be used by 0x2592 (mobile version)
* 0x2e32 is actually non mobile, added its brothers 0x2e02, 0x2e12, 0x2e22, 0x2e42, 0x2e92
* 0x27a2 is actually mobile.
* added 0x2972, 0x2982, 0x2992 for INTEL_TYPE_965 type, and 0x2a12 for INTEL_TYPE_965M.
* added corresponding entries in intel_gart.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40838 a95241bf-73f2-0310-859d-f6bbb57e9c96
(now at least <std> and <offset> are supported properly)
* instead of creating a TimeZone object whenever needed, we now
create it in tzset() and keep it around
* add tests for TZ to locale_test
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40788 a95241bf-73f2-0310-859d-f6bbb57e9c96
virtual but only static methods, it is not so likely that binary compatibility issues may arrise
from using it in new apps. Adjusted all the Jamfiles that included the private libicon headers. Note
that it was never necessary to link against libicon.a, since it's part of libbe anyway. There was one
instance where that was done. Hopefully it does not break the build, but I did this change a while ago,
tested it and then the harddrive began failing.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40679 a95241bf-73f2-0310-859d-f6bbb57e9c96
into libshared.a as BPrivate::BIconButton. Removed some outdated functionality
as well (now only uses BControlLook for drawing, cleaned up custom drawing).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40587 a95241bf-73f2-0310-859d-f6bbb57e9c96
in_addr_t is now in network endian again. Thanks, Philippe!
* Made SetToLoopback(), and SetToLocal() a bit more useful (although the latter
isn't implemented yet).
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40552 a95241bf-73f2-0310-859d-f6bbb57e9c96
initialization order
This was meant to fix#7227, but just seems to have bypassed it - the crash is now somewhere else ... needs more investigation
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40529 a95241bf-73f2-0310-859d-f6bbb57e9c96
* the libbe_build version of BString was broken, at least with respect
to LockBuffer() on an empty string - replaced the implementation and
header with our current version (keeping the type-related changes
required by the build-version)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40526 a95241bf-73f2-0310-859d-f6bbb57e9c96
using libroot_debug.so, instead of having to hardcode them in the application
via calling private heap functions.
* The following options are implemented: 'p' turns on paranoid validation,
'w' triggers periodic wall checking every 500ms ('W' does the same, but every
100ms), 'g' to use guard pages (beware, this will dramatically increase
memory usage), and 'r' which forbids reusing of memory, freed memory is never
actually freed.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40514 a95241bf-73f2-0310-859d-f6bbb57e9c96
Work in progress: fetch next partial downloaded message.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40504 a95241bf-73f2-0310-859d-f6bbb57e9c96
handling:
* package attributes are now compatible with the low level attribute
handling of other HPKG attributes (such that 'package dump' now shows
package attributes, too)
* dropped type names from hpkg format, the attributes were identified
by IDs already and this simplifies the code considerably. Type names
are now handled in BLowLevelPackageHandler only.
* instead of rolling their own mechanism, high-level package attributes
handling is now implemented via a corresonding set of
AttributeHandler-subclasses
* adjusted package writer to only write package attributes that are
needed (empty ones are left out)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40466 a95241bf-73f2-0310-859d-f6bbb57e9c96
* actually write the checksum
* compress the repository info archive, too (handle it as separate
section)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40426 a95241bf-73f2-0310-859d-f6bbb57e9c96
* typedef base classes as 'inherited' and use that instead of the
explicit base class name
* remove superfluous scopes in case blocks
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40420 a95241bf-73f2-0310-859d-f6bbb57e9c96
* fleshed out RepositoryWriterImpl
* renamed BRepositoryHeader to BRepositoryInfo (in accordance with
BPackageInfo)
* adjusted BRepositoryInfo to be able to parse itself from a
driver_settings file
* added package_repo binary (only 'create' works as of yet)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40405 a95241bf-73f2-0310-859d-f6bbb57e9c96
Accounts are now stored in a separate file. Previously they where somehow magically assembled from the chain ids. Now its possible to remove a account temporary by removing the account file form the account folder.
Each account could have an inbound protocol, an outbound protocol and some filters.
Mails are now associated with an account and not with a chain. This required to replace the chain id attribute by an account attribute.
Replace BMailFilter and BMailChain by a less general approach. Basically the chain had a list of filters and call the ProcessMailMessage for each filter. This made it sometime difficult to understand what is going on, e.g. sometimes a filter used information gathered by another filters. The new MailProtocol and MailFilter classes are calling more dedicated hook functions, e.g. HeaderFetched or MessageReadyToSend.
As before all MailProtocol's (plus their filters) are running in their own thread.
Cleaned up the error and status window a bit. Abstracted the interface to these windows. Should be easy to write a BNotification api back-end now.
Parsing of mail headers is much faster now. Fetching the headers of a large mailbox takes ~min and not ~hour now! Initial checkout time is in the same order like Opera. The problem was the massive use of fgets in parse_header (mail_util.cpp) now the complete header is read in one go. Furthermore, only interesting fields are extracted.
Remove some unused files, BeOS relicts... Feel free to translate the mail server and remove the own language system (headers/private/mail/MDRLanguage.h).
Sorry for the remaining old (and new) coding style issues, sometime just ignore them, to many :(
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40397 a95241bf-73f2-0310-859d-f6bbb57e9c96
to create a package that refers to a license that is not a system
license or contained in the package
* added package-info flags (currently only approve_license and
system_package)
* adjusted package-reader/writer and pkgman accordingly
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40393 a95241bf-73f2-0310-859d-f6bbb57e9c96
* PackageWriterImpl no longer accesses members of WriterImplBase
directly, but uses getters/setters instead
* package attribute registration has been moved from PackageWriterImpl
to WriterImplBase, as it will be used in the same manner by the
RepositoryWriter
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40388 a95241bf-73f2-0310-859d-f6bbb57e9c96
* pulled commonly useful parts out of PackageWriterImpl into
WriterImplBase
* moved CachedStringTable and related methods into a separate class,
StringCache, in order to support having more than one string cache
per package file
* made package attribute section use a string cache, too, as that's
going to be very useful for repositories
* instead of writing package attributes directly, we now collect
corresponding PackageAttributes and write those later
* adjusted package reader accordingly
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40376 a95241bf-73f2-0310-859d-f6bbb57e9c96
fixed size flag at once. Not sure if this can be merged into one of the
existing GetInfo() variants without breaking binary compatibility.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40374 a95241bf-73f2-0310-859d-f6bbb57e9c96
types and defines of HPKG
* added header, magic and version for haiku repository format
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40370 a95241bf-73f2-0310-859d-f6bbb57e9c96
section access into the SectionInfo structure, of which
PackageReaderImpl now keeps two instances and a pointer to the
current of these two
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40359 a95241bf-73f2-0310-859d-f6bbb57e9c96
* added kernel-compatible datatypes for reading package info attribute
values (PackageInfoAttributeValue.h) - these will be used at a later
stage by the package-fs to transport those attributes to userland
when asked to do so (by ioctl)
* implemented parsing of package info attributes in PackageReaderImpl
* added support for compressed package attribute section to
PackageReaderImpl
* completed the writing of package info attributes in PackageWriterImpl
and fixed a couple of bugs exposed by parsing
* adjusted 'package list' to show the package info attributes as they
are found
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40354 a95241bf-73f2-0310-859d-f6bbb57e9c96
* fixed a couple of copy'n'paste bugs during parsing of resolvable
expression lists (they were all added as 'requires')
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40353 a95241bf-73f2-0310-859d-f6bbb57e9c96
and BPackageResolvableExpression
* switched GetAsString() to a AsString() as that's much more convenient
and nothing can go wrong anyway
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40347 a95241bf-73f2-0310-859d-f6bbb57e9c96
logs (the OpenTracker license doesn't apply since NaturalCompare
was never part of OpenTracker).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40341 a95241bf-73f2-0310-859d-f6bbb57e9c96
but publish that info through a BPackageWriterListener
* adjusted 'package create' to print a package summary by default and
more verbose info upon request.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40332 a95241bf-73f2-0310-859d-f6bbb57e9c96
* FDCloser is private, so it should live in BPackageKit::BHPKG::BPrivate
* adjusted 'package' binary to no longer use FDCloser (trivial)
* minor cleanup in command_extract.cpp
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40329 a95241bf-73f2-0310-859d-f6bbb57e9c96
* added my own copyright to a couple of files that I changed
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40321 a95241bf-73f2-0310-859d-f6bbb57e9c96
public and private API (still far from ideal, but a start):
* moved several HPKG-classes into the public namespace BPackageKit::HPKG
* added fImpl-wrappers around PackageReader and PackageWriter to hide
most of the gory details
* adjusted 'package'-binary and packagefs accordingly
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40320 a95241bf-73f2-0310-859d-f6bbb57e9c96
* split BPackageResolvable, BPackageResolvableExpression
and BPackageVersion into separate files
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40316 a95241bf-73f2-0310-859d-f6bbb57e9c96
This fixes#7022 and is mostly based on the patch attached to that ticket, with
these changes:
- The patch was adding this to the private _TextInput_ class, not BTextView.
- The patch had a Clear menu item too. I removed that due to the different
semantics between Clear in a BTextView and in a TextInput. The former just
clears the selection where the latter clears the whole view.
We could later add a virtual callback for adding menu items to this context
menu which could be used to add Clear with the two semantics in each class
(this is mainly needed for the enabling logic...each class could handle a clear
message in its own way.) This callback could also obviously be used for other
things, like a spell-check menu or whatever an application would want to add.
Since BTextView has 10 free virtual slots it seems reasonable to add.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40305 a95241bf-73f2-0310-859d-f6bbb57e9c96
* added class BPackageInfo, which contains packaging attributes of
a package (the values relevant for package management)
* implemented parser (mostly) for reading a BPackageInfo from a config
file (.PackageInfo) in order to pass them on to the PackageWriter
when creating a package
* pulled hpkg-related stuff from bin/package into the package kit
* adjusted packagefs-Volume to skip .PackageInfo files when populating
the mountpoint, as those files shouldn't appear as part of an
activated package
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40301 a95241bf-73f2-0310-859d-f6bbb57e9c96
* rip BRepositoryHeader out of BRepositoryConfig and add support
for it to BRepositoryCache
* implement repository removal
* some minor cleanups
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40290 a95241bf-73f2-0310-859d-f6bbb57e9c96
* drop 'Haiku' namespace
* rename 'Package' namespace to 'BPackageKit'
* renamed all public classes to begin with a 'B'
* renamed BPackageKit::Roster to BPackageKit::BPackageRoster to not
clash with the BRoster from the application kit.
* fix some instances of public headers including private ones
Some functional changes, too:
* JobQueue now removes and deletes dependants of failed jobs
automatically
* JobQueue supports waiting for jobs to become runnable
* added a couple of InitCheck() methods where they make sense
and invoke those in users of these classes
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40287 a95241bf-73f2-0310-859d-f6bbb57e9c96
The solver part has been refactored in this way that both solver can be used with the same layout specifications. The active set solver is default now; the performance is not as good as lp_solve, though.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40285 a95241bf-73f2-0310-859d-f6bbb57e9c96
* cleaned up ObjectList.h
* switched several uses of new() to new(std::nothrow)
* moved ugly AsBList() hack into BObjectList<>::Private class and
adjusted all callers accordingly
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40252 a95241bf-73f2-0310-859d-f6bbb57e9c96
a folder to some other place in the filesystem hierarchy
* add helper function to VFS that encapsulates the "conversion" of a
vnode-pointer to a fs_vnode-pointer (used by bindfs)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40238 a95241bf-73f2-0310-859d-f6bbb57e9c96
drivers in the future, such that NetworkStatus and similar software can show
nice names for the devices. The device manager should implement this and
return the B_DEVICE_PRETTY_NAME of the device (and in turn, new style drivers
should actually set this).
* Implemented handling of this ioctl in the scsi_periph to return the vendor/
product strings.
* Implemented this in the ATA bus manager to return the model from the info
block.
* KDiskDevice now fills in the partition_data::name if the B_GET_DEVICE_NAME
succeeds.
* As a side effect, at least BootManager now shows the drive name; maybe
DriveSetup does as well for the raw device.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40231 a95241bf-73f2-0310-859d-f6bbb57e9c96
used by tarfs anyway) instead of RLE.
While this should allows larger logo/icons, it doesn't remove the
current 300000 bytes size limits for haiku_loader, so #6710 is not yet fixed.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40215 a95241bf-73f2-0310-859d-f6bbb57e9c96
* The team and thread kernel structures have been renamed to Team and Thread
respectively and moved into the new BKernel namespace.
* Several (kernel add-on) sources have been converted from C to C++ since
private kernel headers are included that are no longer C compatible.
Changes after merging:
* Fixed gcc 2 build (warnings mainly in the scary firewire bus manager).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40196 a95241bf-73f2-0310-859d-f6bbb57e9c96
