* add a INTEL_TYPE_915M type to be used by 0x2592 (mobile version)
* 0x2e32 is actually non mobile, added its brothers 0x2e02, 0x2e12, 0x2e22, 0x2e42, 0x2e92
* 0x27a2 is actually mobile.
* added 0x2972, 0x2982, 0x2992 for INTEL_TYPE_965 type, and 0x2a12 for INTEL_TYPE_965M.
* added corresponding entries in intel_gart.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40838 a95241bf-73f2-0310-859d-f6bbb57e9c96
I remember there was a ticket about the localization problem in one of
this components. I'll look for it tomorrow and close them all. If I'll find them.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40734 a95241bf-73f2-0310-859d-f6bbb57e9c96
the B_TRANSLATE_WITH_COMMENT macro are misinterpreted by our
localization routines. I fix this one, because it provocate
permanent fingerprint check failure during catkeys link procedure.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40723 a95241bf-73f2-0310-859d-f6bbb57e9c96
virtual but only static methods, it is not so likely that binary compatibility issues may arrise
from using it in new apps. Adjusted all the Jamfiles that included the private libicon headers. Note
that it was never necessary to link against libicon.a, since it's part of libbe anyway. There was one
instance where that was done. Hopefully it does not break the build, but I did this change a while ago,
tested it and then the harddrive began failing.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40679 a95241bf-73f2-0310-859d-f6bbb57e9c96
- Set watching variable when leaving the watching method.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40635 a95241bf-73f2-0310-859d-f6bbb57e9c96
iconsintently.
Respect the 80 columns limit, update copyright, used calloc instead of
malloc.
No functional changes (hopefully)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40597 a95241bf-73f2-0310-859d-f6bbb57e9c96
handling:
* package attributes are now compatible with the low level attribute
handling of other HPKG attributes (such that 'package dump' now shows
package attributes, too)
* dropped type names from hpkg format, the attributes were identified
by IDs already and this simplifies the code considerably. Type names
are now handled in BLowLevelPackageHandler only.
* instead of rolling their own mechanism, high-level package attributes
handling is now implemented via a corresonding set of
AttributeHandler-subclasses
* adjusted package writer to only write package attributes that are
needed (empty ones are left out)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40466 a95241bf-73f2-0310-859d-f6bbb57e9c96
variables to make the function a bit clearer, hopefully.
* Fixed the wrong order of releasing the reference, and removing the object
from the hash table -- thanks Rene!
* Added a bit of documentation to InterfaceAddress::Prepare().
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40455 a95241bf-73f2-0310-859d-f6bbb57e9c96
This fixes random memory access on interface removal.
* Optimized IndexOfAddress() for NULL addresses.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40447 a95241bf-73f2-0310-859d-f6bbb57e9c96
have duplicates there, it should certainly not panic.
* Do not add unspecified addresses to the hash table.
* The result of adding the initial address of an interface was ignored; now, the
interface is correctly destructed, if necessary.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40444 a95241bf-73f2-0310-859d-f6bbb57e9c96
* clean up
* directories don't seem to have a valid contiguous flag, fixes directories with many files.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40431 a95241bf-73f2-0310-859d-f6bbb57e9c96
* fleshed out RepositoryWriterImpl
* renamed BRepositoryHeader to BRepositoryInfo (in accordance with
BPackageInfo)
* adjusted BRepositoryInfo to be able to parse itself from a
driver_settings file
* added package_repo binary (only 'create' works as of yet)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40405 a95241bf-73f2-0310-859d-f6bbb57e9c96
Also the read flags are synced with the server. This makes it easy to have the same mailbox state on different machines.
Messages could be deleted by delete them form the folder (not when moving them to trash) This maybe needs some more thoughts but its a save solution. One problem with moving it to trash is that you also want to have the option to restore it again. If it is a header only messages and you delete it from the server you lose the body part. Complete messages could theoretically be append to the mailbox again when restoring the mail form trash. Append is commented out though...
An solution for the delete problem would be to move the message to a trash folder on the server. Moving mails on the server is not implemented yet, though.
You can subscribe or unsubscribe to a mailbox using the imap pref panel. The settings are written to the server and are not stored locally.
Add some helper classes which could also be used for POP and SMTP:
ServerConnection: abstract ssl or socket connection
ConnectionReader (still a bit IMAP specific but could be easily separated IMHO): read complete lines or a bunch of data more efficient. Old implementation did it byte by byte, this class read data in bunches and buffer the left over for the next request...
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40399 a95241bf-73f2-0310-859d-f6bbb57e9c96
Remove button in the pref app removes the complete account because we don't have separate chains any more. The pref app stays a mess, needs some layout love! (I did it even look worse...)
The new account/mail settings classes know if they have been changed but the current pref panel does not use this feature very well. It always mark the settings as modified when the settings view is displayed or more precise when the settings view is detached from the pref window, this could be optimized. The according mail protocol is completely restarted when their settings changed.
Some system filters are now directly integrated in the mail protocols. Hopefully make things easier to understand.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40398 a95241bf-73f2-0310-859d-f6bbb57e9c96
#7135#7140#7141#7145#7186#7188#7191#7136#7187#7184#7185#7192#7138#7139
with some changes and exclusions:
- all attempts to localize "fprintf(stderr,..." and "printf(..."
replaced by _untranslated_ "syslog(LOG_ERR ...";
- following *Translator.rdef files, that were not added in mentioned patches
were additionally created:
SGI, TIFF, RAW, RTF, PPM, WebP, EXR, STXT, WonderBrush, GIF, TGA;
- some small fixes for consistent catalogs building.
Thank you, Jorma! Please check. ;-)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40357 a95241bf-73f2-0310-859d-f6bbb57e9c96
* added kernel-compatible datatypes for reading package info attribute
values (PackageInfoAttributeValue.h) - these will be used at a later
stage by the package-fs to transport those attributes to userland
when asked to do so (by ioctl)
* implemented parsing of package info attributes in PackageReaderImpl
* added support for compressed package attribute section to
PackageReaderImpl
* completed the writing of package info attributes in PackageWriterImpl
and fixed a couple of bugs exposed by parsing
* adjusted 'package list' to show the package info attributes as they
are found
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40354 a95241bf-73f2-0310-859d-f6bbb57e9c96
2) Functionality of the handling the rate for AC97 Front PCM DAC added.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40327 a95241bf-73f2-0310-859d-f6bbb57e9c96
public and private API (still far from ideal, but a start):
* moved several HPKG-classes into the public namespace BPackageKit::HPKG
* added fImpl-wrappers around PackageReader and PackageWriter to hide
most of the gory details
* adjusted 'package'-binary and packagefs accordingly
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40320 a95241bf-73f2-0310-859d-f6bbb57e9c96
- Based on GPL code in linux kernel staging
- Low level communications mostly done
- Probes GPIO pins and detects LEDs
- Sets device up and pushes firmware
- Detects MAC address
- blinks LED through a spawned thread based on driver state
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40302 a95241bf-73f2-0310-859d-f6bbb57e9c96
* added class BPackageInfo, which contains packaging attributes of
a package (the values relevant for package management)
* implemented parser (mostly) for reading a BPackageInfo from a config
file (.PackageInfo) in order to pass them on to the PackageWriter
when creating a package
* pulled hpkg-related stuff from bin/package into the package kit
* adjusted packagefs-Volume to skip .PackageInfo files when populating
the mountpoint, as those files shouldn't appear as part of an
activated package
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40301 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Inline extent data isn't read with the file_cache yet as the data is not block aligned.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40282 a95241bf-73f2-0310-859d-f6bbb57e9c96
was rewritten to Haiku MultiAudio API.
This changeset replaces both old version of the same driver written for
BeOS R3 Sound API and ali5451 driver that handles the same audio hardware.
The driver was tested with SiS 7018 and ALi M5451 cards. Trident DX/NX
support still should be tested.
Some parts, related to ALi M5451 support were inspired by original ali5451
code so the copyright (c) 2009 by Krzysztof Äwiertnia was added in the source.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40273 a95241bf-73f2-0310-859d-f6bbb57e9c96
Both JPEGTranslator and JPEG200Translator were "exporting" gSettings symbol,
which when loaded within a app (like Paladin) exporting the same global symbol
was leading to a symbol resolution error. See #7114 for details.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40245 a95241bf-73f2-0310-859d-f6bbb57e9c96
a folder to some other place in the filesystem hierarchy
* add helper function to VFS that encapsulates the "conversion" of a
vnode-pointer to a fs_vnode-pointer (used by bindfs)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40238 a95241bf-73f2-0310-859d-f6bbb57e9c96
drivers in the future, such that NetworkStatus and similar software can show
nice names for the devices. The device manager should implement this and
return the B_DEVICE_PRETTY_NAME of the device (and in turn, new style drivers
should actually set this).
* Implemented handling of this ioctl in the scsi_periph to return the vendor/
product strings.
* Implemented this in the ATA bus manager to return the model from the info
block.
* KDiskDevice now fills in the partition_data::name if the B_GET_DEVICE_NAME
succeeds.
* As a side effect, at least BootManager now shows the drive name; maybe
DriveSetup does as well for the raw device.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40231 a95241bf-73f2-0310-859d-f6bbb57e9c96
* inject modification time of package folder into root folder of
package-fs
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40230 a95241bf-73f2-0310-859d-f6bbb57e9c96
the mount parameters
* packagefs_read_stat(): put some sane value into st_blocks
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40227 a95241bf-73f2-0310-859d-f6bbb57e9c96
mount parameters - there doesn't seem to be a way for a filesystem
to access the path to which it was mounted, is there?
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40225 a95241bf-73f2-0310-859d-f6bbb57e9c96
order to be able to mount packages from somewhere else than
'/boot/common/packages' (squashes a TODO)
* squashed another TODO about needing to remove nodes of already
installed packages if anything goes wrong during the activation
of a package domain
* fix what to me looks like a bug in Volume::AddPackageDomainJob::Do(),
fDomain is accessed unconditionally in the destructor, so NULLing
it here is bad (it doesn't make sense from a reference-passing POV
either). The problem never showed as this code is never being executed
currently (no way to add additional package domains as of yet)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40214 a95241bf-73f2-0310-859d-f6bbb57e9c96
* The team and thread kernel structures have been renamed to Team and Thread
respectively and moved into the new BKernel namespace.
* Several (kernel add-on) sources have been converted from C to C++ since
private kernel headers are included that are no longer C compatible.
Changes after merging:
* Fixed gcc 2 build (warnings mainly in the scary firewire bus manager).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40196 a95241bf-73f2-0310-859d-f6bbb57e9c96
This bug only happens for bitmaps with unusual lengths (often the last blockgroup block bitmap) and which happen to be full.
Should fix#7074.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40175 a95241bf-73f2-0310-859d-f6bbb57e9c96
* BitmapBlock::FindMarked/FindUnmarked() tried to find a free bit
at the end of a full bitmap. This fixes#7069.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40143 a95241bf-73f2-0310-859d-f6bbb57e9c96
* I reused crc_table.cpp from the UDF filesystem and switched it to have the reversed algorithm,
then generated the table in CRCTable.cpp
* added a binary search for extent tree leaves.
* fixed a check in InodeAllocator::New().
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40129 a95241bf-73f2-0310-859d-f6bbb57e9c96
specifier to float constants. Hopefully I'm done with this now.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40110 a95241bf-73f2-0310-859d-f6bbb57e9c96
Butterfly by Geoffry Song.
Leaves by Deyan Genovski and Geoffry Song.
Thanks guys!
I fixed a few coding violations and wrote the Jamfiles.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40098 a95241bf-73f2-0310-859d-f6bbb57e9c96
Expanded search in every configuration, not only first. ELSA USB modem for instance
publish two configurations, the first one being a vendor-specific one for
Windows NT.
ACMDevice now don't assume anymore union functional descriptor is always there.
The data interface index can be found also in Call Management (CM) functional
descriptor.
(Style cleanup pending...)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40092 a95241bf-73f2-0310-859d-f6bbb57e9c96
When in nondirect mode, SwapBuffers() wasn't respecting the vsync parameter.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40051 a95241bf-73f2-0310-859d-f6bbb57e9c96
code is not used; maybe it was not implemented completly
or BePDF could not render it correctly.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39996 a95241bf-73f2-0310-859d-f6bbb57e9c96
Postfix/prefix increment evaluation order is not changed by parantheses. Use '+ 1' for readability instead. CID 2982.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39966 a95241bf-73f2-0310-859d-f6bbb57e9c96
Afaict it looks like it results in unbalanced Acquire calls on the parent. CID 10393.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39964 a95241bf-73f2-0310-859d-f6bbb57e9c96
A bit confused about the signedness handling in ring_buffer internals though, int32 to size_t.
Unnested the acpi_namespace_read function a bit and removed dead check for negative lengths from read. CID 4093.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39963 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Use strlcpy() instead of memcpy() to ensure that the dirent is properly
terminated.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39954 a95241bf-73f2-0310-859d-f6bbb57e9c96
bytes were initialized to 0 due to wrong use of sizeof().
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39953 a95241bf-73f2-0310-859d-f6bbb57e9c96
actually hit this limit.
* Use snprintf() instead of sprintf() as suggested by CID 6447 (even though the
USB module isn't supposed to return such a malformed string).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39908 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Check the length of the incoming buffer before accessing it through the union.
It's necessary to do this dependent on the operation at hand, since the caller
doesn't need to provide the full union size and the size may differ between
(still compatible) protocol versions.
* Replace memcpy() by user_memcpy() where data is exchanged with userland.
* Small style cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39907 a95241bf-73f2-0310-859d-f6bbb57e9c96
variable. Didn't matter, as the parameter is only accessed through the
usb_raw_command variable that it is casted to early in the function. CID 5219.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39906 a95241bf-73f2-0310-859d-f6bbb57e9c96
crash trying to delete the not created allocator. CID 9562.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39905 a95241bf-73f2-0310-859d-f6bbb57e9c96
Coverity was intentional (as explained by the comment). That the fInterval
member was somehow totally forgotten though, wasn't. This should only affect
EHCI and OHCI as they take the interval into account. Might fix some strange
behaviour, but most likely won't, as the interval range is rather narrow and
shouldn't be too noticeable if set incorrectly. CID 9558.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39904 a95241bf-73f2-0310-859d-f6bbb57e9c96
* validate fBlockShift in superblock.
* Volume::AllocateBlocks() now uses an absolute fsblock instead of a blockgroup related fsblock.
* AllocationBlockGroup now provides absolute fsblock values.
* added support for extents feature: ExtentStream class is the equivalent for DataStream class for extent operations.
The extent tree implementation is very basic, should work for normal growing/shrinking
operations, but not for sparse files. When enlarging a file and extent tree is full,
the root is moved in a new block and a new level is added on top. Extents can usually
be extended when adjacent blocks are allocated. Shrinking happens by removing leafs
one after another.
* removed empty IndexedDirectoryIterator.*
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39886 a95241bf-73f2-0310-859d-f6bbb57e9c96
Something appeards to be very wrong with codec registration.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39885 a95241bf-73f2-0310-859d-f6bbb57e9c96
* A lot of HID definitions got extracted from USB_hid.h into their
own files. Many more definitions have been added from the specs.
* The names have been moved into the proper B_* namspace.
* The USB hid driver has been adapted for the changes.
Thanks a lot and sorry for the delay!
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39874 a95241bf-73f2-0310-859d-f6bbb57e9c96
read the attribute "transport_address" created and set to an empty
string by the print_server when the printer was created.
fEndpoint used an empty host name to connect to and then failed.
Not sure why this caused a crash after closing the error dialog.
Maybe something went wrong in the destructor using an invalid fEndpoint?
Cures the symptoms of ticket #6973.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39818 a95241bf-73f2-0310-859d-f6bbb57e9c96
needed a corresponding adjustment to convert it back to host order before
working with it. Fixes#6972.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39812 a95241bf-73f2-0310-859d-f6bbb57e9c96
* consoled: CID 1696, the found deadkey string is unused.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39811 a95241bf-73f2-0310-859d-f6bbb57e9c96
* DirectoryIterator::FindEntry() now takes name length in account for name comparison.
* cleanup
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39809 a95241bf-73f2-0310-859d-f6bbb57e9c96
Builds but won't work because the tty module lacks essential calls to read and write data :^)
Lots of ifdef since I need the R5 code around for now.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39791 a95241bf-73f2-0310-859d-f6bbb57e9c96
- use new(std::nothrow) from <new> since we dropped kernel_cpp.h,
- fix "declared 'extern' and later 'static'" warning,
- fix "deprecated conversion from string constant to 'char*'" warning in tracing code.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39784 a95241bf-73f2-0310-859d-f6bbb57e9c96
rules and support files that don't really apply anymore.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39763 a95241bf-73f2-0310-859d-f6bbb57e9c96
well this was working, but since it was non-functional on Haiku anyway this
shouldn't hurt.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39762 a95241bf-73f2-0310-859d-f6bbb57e9c96
and doesn't come with BeOS backwards compatibility. It also has the BeOS
compatibility ioctl ops removed and such. I've actually made this back in april,
so I don't really remember any more details.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39760 a95241bf-73f2-0310-859d-f6bbb57e9c96
- Make the S&T groups navigateable by pressing the S&T key + arrow down/up. Arrow down means to send the active S&T group to the bottom. Arrow up means to rise the bottom S&T group to the front. If no S&T group is selected, in both cases the front-most S&T group is activated.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39751 a95241bf-73f2-0310-859d-f6bbb57e9c96
to whole numbers. The whole imageable area should now be
available for printing.
Hope this does not have a negative effect on image quality.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39734 a95241bf-73f2-0310-859d-f6bbb57e9c96
imageable area; made them absolute to the left, top
of the page. The page contents should now be positioned
correctly.
* Make sure the image to be printed on the page is
inside the imageable area. This fixes the configuration
error that the page is outside the imageable area.
TODO fix the implementation limitation that up to 1 Inch of the
total imageable page width and height cannot be used. There
is a comment in the source code that explains why that is.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39733 a95241bf-73f2-0310-859d-f6bbb57e9c96
the correct sender MAC address in outgoing link level packets.
* SocketStatus() now also works correctly for bound protocols, ie. receiving
data from a bound link level socket is now working as well.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39722 a95241bf-73f2-0310-859d-f6bbb57e9c96
address from transport_address attribute but a custom one. Fixed.
Now explicitly shutdown the connection at job end, some printers requires this.
Style cleanup that was lying since months, but this code will be reworked
again soon, as the SetupWindow needs to be rebuild for layout API and locale
translation...
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39718 a95241bf-73f2-0310-859d-f6bbb57e9c96
By the way, is there a pattern how to select the colours?
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39708 a95241bf-73f2-0310-859d-f6bbb57e9c96
Simplify Decorator highlighting code. Thanks Ingo for the hard part done in the previous highlight changes!
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39702 a95241bf-73f2-0310-859d-f6bbb57e9c96
- Added ExtendDirtyRegion(), given a decorator region it extends the given
dirty region. Implemented only in DefaultDecorator yet.
- Added [Set]RegionHighlight() which allows to set/get a highlight for a
decorator region. The visual representation of the set highlight value
is up to the derived classes. The only globally defined value is
HIGHLIGHT_RESIZE_BORDER, though it's not implemented anywhere yet.
* DefaultDecorator: Added the highlight for the component as a parameter to
GetComponentColors(). Added a wrapper _GetComponentColors() with the old
interface, fetching the highlight from the base class.
* SATDecorator: Defines and interprets its own highlight value
HIGHLIGHT_STACK_AND_TILE.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39640 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Use a separate color array for the buttons, instead of using that for the
tab.
* _DrawBlendedRect(): No longer gets the focus flag, but gets a color array
instead.
* _GetBitmapForButton(): Made non-static and removed the "focus" and "object"
parameters.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39637 a95241bf-73f2-0310-859d-f6bbb57e9c96
default decorator and used it instead of Decorator::Region where appropriate
(GetComponentColors(), _GetBitmapForButton()).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39636 a95241bf-73f2-0310-859d-f6bbb57e9c96
- Introduced a virtual GetComponentColors(), that returns an array with the
current colors for the specified component.
- Removed all rgb_color members. Replaced the ones that were actually
constant by const (or static const) ones and made use of
GetComponentColors() where the non-constant ones were used.
* SATDecorator:
- Turned rgb_color members into constants and added an overriding version
of GetComponentColors().
- HighlightBorders(): Invalidate the tab, too, as we use the border
colors for drawing the outer lines of the tab (was this intented?).
Fixes artifacts when breaking apart titled windows.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39630 a95241bf-73f2-0310-859d-f6bbb57e9c96
closing flag sequence. See RFC1662 §4.4.2, last paragraph.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39628 a95241bf-73f2-0310-859d-f6bbb57e9c96
virtual DrawButtons().
* SATDecorator: Override DrawButtons() instead of _DrawTab(), thus saving a
good deal of code duplication.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39627 a95241bf-73f2-0310-859d-f6bbb57e9c96
* whitespace cleanup and renamed log2() to radeon_log2 (conflicts with log2 in math.h)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39620 a95241bf-73f2-0310-859d-f6bbb57e9c96
RegionAt() just gets a point and returns which region was hit. This is in
order to move behavioral code to [Default]WindowBehaviour. I'm not happy
with this solution either, but to do it properly one would have to break the
Decorator interface into separate look and feel interfaces and reorganize the
interaction with WindowBehaviour. A task for the so-inclined reader. :-)
* Adjusted the Decorators implementations, but really tested only the default
one.
* DefaultWindowBehaviour:
- Replaced _ActionFor() method by a _RegionFor() which interprets the region
returned by Decorator::RegionAt() and converts it to a "functional" region,
i.e. combines cases we handle the same way.
- MouseDown():
- Handle the click region cases more in detail, disentangling the mouse
button cases. With the following effects:
- The middle mouse button has no effect anymore.
- Left and right mouse buttons no longer share common behavior. A right
click on a decorator button will send the window to the back.
- The window key window management modifier combo does now have precedence,
i.e. Cmd-Ctrl-click on the decorator buttons will have the same effect as
clicking anywhere in the window.
- When modifiers change between the clicks, reset the click count. Prevents
a standard click in the window followed by a Cmd-Ctrl-click from being
recognized as a double-click.
- Mouse*(): Introduced a fMinimizeCheckOnMouseUp which works similar to
fActivateOnMouseUp, just for double-clicks. The decision whether a
double-click minimizes the window is postponed until releasing the mouse
button. After moving the mouse sufficiently far or waiting half a second
without moving the mouse the window will no longer be minimized. Fixes
#6868.
- MouseUp(): Moved the primary mouse button check without the
"decorator != NULL" block. I suppose this fixes issues with the Cmd-Ctrl
actions and decoratorless windows (if those actually exist).
I can't wait to hear what things I've broken. :-)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39602 a95241bf-73f2-0310-859d-f6bbb57e9c96
since long ago already.
Keep the userland_server one, because, maybe, one day...
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39575 a95241bf-73f2-0310-859d-f6bbb57e9c96
Embedded Controller still needs some looking into, and I had to remove the WIP code for dumping MADT.
Both are on my TODO.
Also removed a lot of unneeded parts of ACPICA from trunk and did some cleanup in Jamfile.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39565 a95241bf-73f2-0310-859d-f6bbb57e9c96
* replaced .. with $(DOTDOT) in Jamfiles
* added __STDC_CONSTANT_MACROS define for C++ files (required for UINT64_C)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39537 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Tested with HUAWEI 3G Modem (12d1:1446 => 12d1:1001).
* Devices reference is usb-modeswitch-data-20100826 (added eight vendors).
* The driver doesn't expose any device entries, hence it should be linked at dev root.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39536 a95241bf-73f2-0310-859d-f6bbb57e9c96
- Add communication part to restore and save S&T groups.
- Fix call of GetDecoratorSettings listener hook.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39534 a95241bf-73f2-0310-859d-f6bbb57e9c96
No functional changes, except for the two traces removed.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39511 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Renamed everything after WebP, as it turns out the official name is
case-sensitive.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39505 a95241bf-73f2-0310-859d-f6bbb57e9c96
- Add untested code to save a SATGroup and to restore a SATGroup.
- Splitting of a SATGroup is now triggered from the WindowArea destructor. This make it easier to restore S&T groups when windows in a group are missing. A group decays automatically in multiple groups when the missing window connected multiple windows.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39461 a95241bf-73f2-0310-859d-f6bbb57e9c96
- Only use min size constraints now. If there is a clash between a window with a max size and another window with a min size the max size is ignored and the size is enlarged if needed. When removing this window from a S&T group the old size limit is restored.
Same is done for none resizeable windows.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39432 a95241bf-73f2-0310-859d-f6bbb57e9c96
SIOCSIFMEDIA.
* Made sure that the two media ioctls are actually forwarded to the driver.
* Added NetworkDevice.cpp to the build.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39389 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Fixed warning in Inode::WriteAt(), but left warnings in kernel_interface.cpp
in there; I guess that's work in progress (although having the io hook would
be nice).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39379 a95241bf-73f2-0310-859d-f6bbb57e9c96
* This changes Inode::CheckPermissions(), and bfs_write_stat() based on Ingo's
solution in his file corruption test file system.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39378 a95241bf-73f2-0310-859d-f6bbb57e9c96
Initialize the stream's IO buffer, otherwise it could crash in ~StreamBase().
It's only initialized when the media format was actually successfully probed.
Fix#6595. Thanks.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39374 a95241bf-73f2-0310-859d-f6bbb57e9c96
* RemoveEntry(): set inode id to zero when reaching the end of block
* FindEntry(): keep on searching if Get() returns B_BAD_DATA
* added _Offset() based on fLogicalBlock and fDisplacement
* Next(): keep on searching when inode id is zero; also when entry length is zero, keep on with next block
* added GetNext() to get the next valid entry.
* Get(): now returns B_BAD_DATA on a zero length or inode id.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39343 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Also unreserve the device on driver uninit.
* Improved some TRACE messages
Compiles but otherwise untested. Relates to #6798.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39338 a95241bf-73f2-0310-859d-f6bbb57e9c96
Libprint requires the horizontal and vertical resolution
to be the same. For now use the maximum resolution when
rendering the page bands.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39327 a95241bf-73f2-0310-859d-f6bbb57e9c96
function in the common accelerant code wasn't public in the first
place and the patch was a correction for r37670, sorry for
missing that. Thanks!
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39321 a95241bf-73f2-0310-859d-f6bbb57e9c96
few warnings. Thanks! I did not apply the hunks about moving
a logging function in the common accelerant code to be static.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39320 a95241bf-73f2-0310-859d-f6bbb57e9c96
passing an additional -Wall to the compiler, which may actually
have unwanted effects. -Wall is standard by the build system.
Also, -Wno-multichar was passed unnecessarily for Haiku targets.
I didn't remove it for the bfs_shell, hope this is what Ingo meant
in the ticket.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39314 a95241bf-73f2-0310-859d-f6bbb57e9c96
only more readable, but also working correctly.
* Solved the problem stippi outlined differently, by checking whether length is
greater size for unsupported options.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39311 a95241bf-73f2-0310-859d-f6bbb57e9c96
* don't try to non configured memory map IO space
* use a kernel thread when irq number is zero or 0xff
Should help with #4491
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39310 a95241bf-73f2-0310-859d-f6bbb57e9c96
hints at a possible problem: Within the process_options() function, the
code does not make sure that size is a multiple of the option length
(unless I missed something) and thus the loop could wrap the unsigned
size variable, and not exit as intended. Make size an ssize_t and cast
where appropriate, after making sure it's initially a positive value.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39309 a95241bf-73f2-0310-859d-f6bbb57e9c96
BitmapBlock: also use file system blocks, current type is off_t. Also added more trace.
BlockAllocator: added an assert and more trace
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39302 a95241bf-73f2-0310-859d-f6bbb57e9c96
purpose anymore, and was just confusing.
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39281 a95241bf-73f2-0310-859d-f6bbb57e9c96
* added support READ_12/16 and WRITE_12/16 in ata and scsi_periph, this enables read/write on block offsets greater than 2TB
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39278 a95241bf-73f2-0310-859d-f6bbb57e9c96
* ata: don't fail if lba_sector_count is null and lba48_sector_count is not
* scsi_periph: if ReadCapacity() returns 0xffffffff, use ReadCapacity16() instead
* scsi_disk: use a different computation in the struct geometry computation for bigger disks
Tested successfully with a virtual 10TB hard drive.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39252 a95241bf-73f2-0310-859d-f6bbb57e9c96
* more fixes in BitmapBlock::FindNextMarked() and BitmapBlock::FindPreviousMarked()
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39242 a95241bf-73f2-0310-859d-f6bbb57e9c96
* added error messages in InodeAllocator, Inode
* if BlockAllocator can't initialize, don't fail completely but switch to readonly
* fixed a bug in FindNextMarked() for bitmaps with a length non multiple of 32
* Inode::FindBlock() now returns an optional block_run length, useful for get_file_map()
* added flag for Inode for extents
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39234 a95241bf-73f2-0310-859d-f6bbb57e9c96
* This is still work in progress:
Printing should work with the following restrictions:
- Color printing is untested.
- Some configuration options provided by Gutenprint are missing.
- Error reporting is missing.
- The page margins should at least to increased to 1 cm
or 0.4 Inch.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39216 a95241bf-73f2-0310-859d-f6bbb57e9c96
That explain why a empty menu after JPEG Image was visible in any menu
populated by BtranslationUtils::AddTranslationItems(, B_TRANSLATOR_BITMAP, ...),
as seen for instance in Screenshot "Save As".
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39159 a95241bf-73f2-0310-859d-f6bbb57e9c96
driver add-on).
* Added ability to search for a PrinterCap by ID to class PrinterCap
(for Gutenprint driver add-on).
* Moved code for searching a PrinterCap by name into class PrinterCap.
* Refactored code in JobSetupDlg to use the new method.
* Refactored duplicated code in JobSetupDlg.
* There is still a lot of refactoring potential in libprint.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39141 a95241bf-73f2-0310-859d-f6bbb57e9c96
we already support the extra isize feature, so it's now added
removed unused Inode::AttributeBlockReadAt()
group_descriptor_size was previously a reserved field in the super block
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39125 a95241bf-73f2-0310-859d-f6bbb57e9c96
It needs a bit polish in code but wanted to commit before leaving BG.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39124 a95241bf-73f2-0310-859d-f6bbb57e9c96
- File system is now only displayed when the partition actually has a filesystem.
- Now checks if the DiskSystem supports initializing.
- Updated the *ParamsPanels, as well as, the Disk System add-ons to use the new storage api changes (see below).
Storage Kit:
- Simplified the parameters editor system. Now all parameter editor requests go through a single function, GetParameterEditor, and pass a B_PARAMETER_EDITOR_TYPE to request a particular parameter editor.
- Moved DiskDeviceAddOnManager.h to the headers directory, as it is now required by InitParamsPanel.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39115 a95241bf-73f2-0310-859d-f6bbb57e9c96
pointer in the media_format user data section.
* In the AVCodecEncoder, optionally use the AVCodecContext pointer
from the AVFormatWriter instead of its own instance. The problems
I am investigating are not improved by this, but it may be needed
anyway.
* Map the bitrate for audio to a fixed table. Certain encoders will
refuse to use a non-standard bitrate, like the currently enabled
AC-3 encoder.
* Fixed tracing output in _EncodeAudio().
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39039 a95241bf-73f2-0310-859d-f6bbb57e9c96
find a way to do this properly, though. The pixel format
selected by AVCodecEncoder should match here.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39037 a95241bf-73f2-0310-859d-f6bbb57e9c96
We now use the Attribute class from bfs (instead of AttributeIterator) to manage small data and block attributes, though it's still readonly.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39036 a95241bf-73f2-0310-859d-f6bbb57e9c96
that they can modify the media_format passed in. For example they
can store information in the user_data section. I don't actually
use this anymore, but it may come in handy again.
AVFormatWriter:
* Adjust the AVCodecContext flags not only for video, but also
for audio streams (as the API example does). This mechanism
may not yet work, since the AVCodecEncoder actually uses a
different AVCodecContext instance.
* Use the encodeInfo->flags and specify the key frame flag
for the AVPacket. This finally makes videos encoded on Haiku
seekable.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39035 a95241bf-73f2-0310-859d-f6bbb57e9c96
hard to see the big picture and tell what actually works
in the higher levels of the code.
* Coding style cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39033 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Don't hardcode PIX_FMT_YUV420P, but use the color space
from the list of codec supported ones which has the best
quality.
* Maintain media_encode_info->flags by specifying whether
a chunk contains a keyframe. According to the libavformat
API example, all audio chunks are keyframes. For video
chunks, use the fContext->coded_frame->key_frame flag.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39032 a95241bf-73f2-0310-859d-f6bbb57e9c96
The candidate window is the dragged window and the parent window is the window that accept the SAT operation.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39003 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Prettify layout of final stats output of checkfs
based on patch by engleek from ticket #4277.
* Fixed minor coding style violation.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38996 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Use layout API in preview printer add-on.
* Use layout API in some dialogs in PDF Writer.
* Removed unused class PrinterSetupWindow from PDF Writer.
* Improved layout in print_server configuration dialog.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38986 a95241bf-73f2-0310-859d-f6bbb57e9c96
startup before being able to reply initial configuration request.
This fix#6173.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38982 a95241bf-73f2-0310-859d-f6bbb57e9c96
certain video sizes (720x576 for example) and with 48 kHz raw
audio. Clockwerk actually uses a mechanism which worked on BeOS
to check if an encoder would accept a certain media_format, but
this does not yet work on Haiku and thus the format is available
even when trying to render later will fail.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38978 a95241bf-73f2-0310-859d-f6bbb57e9c96
be enabled in config.h. That's the case now, but I did this change
later and didn't realize it would fix MPEG4 encoding.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38976 a95241bf-73f2-0310-859d-f6bbb57e9c96
and quality in audio and video AVCodecContext setup code
paths.
* Disabled some debug output
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38975 a95241bf-73f2-0310-859d-f6bbb57e9c96
this brings nanoseconds for access, change and modification times, and also brings creation time.
* switched off some debug output
* HTreeEntryIterator: fCount can equal fLimit.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38964 a95241bf-73f2-0310-859d-f6bbb57e9c96
* actually checks for readonly features if mounting read-write
* don't use a journal when mounting readonly
* DataStream::_BlocksNeeded(): in case of double or triple indirects,
compute the additional blocks needed using the difference between the
old and new indirects blocks. This was resulting in a bad NumBlocks on an inode
* BitmapBlock: mark methods missed an iteration when the startingBit was zero.
Some blocks were then allocated two times (at most 32 for each allocation run).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38950 a95241bf-73f2-0310-859d-f6bbb57e9c96
add-ons too. The USBPrinterRoster thread has to be stopped before
the transport add-on gets unloaded.
This fixes the bug described in ticket #6008 that a page gets printed
again and again.
* Added comment that the add-on might access a deleted object if the printer
get disconnected during printing.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38915 a95241bf-73f2-0310-859d-f6bbb57e9c96
without acquiring a reference to it, and thus led to bug #6565.
* Added a commented out function that dumps all current reference counts.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38867 a95241bf-73f2-0310-859d-f6bbb57e9c96
to the beginning of the stream by bytes, if all else
fails.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38853 a95241bf-73f2-0310-859d-f6bbb57e9c96
ByteIOContext. libavformat may reallocate it
on demand, we need to use the matching allocation
methods.
* Init the ByteIOContext with the proper "write flag".
This solves a busy loop when writing the trailer of
MKV files, since the first buffer was initially skipped
and the MKV muxer can not seek back in the stream
where it wants.
* Get rid of the fCalculatePTS member, and calculate
PTS of audio packets as well. I don't remember why
I prevented that, however VLC complains about audio
packets having wrong PTS (with or without this change)
Our own MediaPlayer plays videos generated by (a modified)
Clockwerk at least once, but seeking subsequently fails.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38851 a95241bf-73f2-0310-859d-f6bbb57e9c96
and there is also ituh263enc.c, of which I am unsure how it
fits into the picture. However the mpeg4 encoder is using a "RL"
table of the h263 encoder, and it appears it was forgotten to
make sure it's initialized when splitting these files. Should
be upstreamed. Fixes a crash when trying to use the MPEG4 encoder.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38847 a95241bf-73f2-0310-859d-f6bbb57e9c96
to be revealed, as both variables were not supposed to change between calls
to parse_pack_data(). This could cause an invalidation of the CD-text data,
as well as an endless loop.
* Disabled (and improved) some more debug output.
* Added a short description to parse_pack_data().
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38844 a95241bf-73f2-0310-859d-f6bbb57e9c96
opening parenthesis on a new line & 80 chars/line limit).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38837 a95241bf-73f2-0310-859d-f6bbb57e9c96
one cannot open the device anymore if no media is present - this did also let
the disk device manager ignore CD-ROMs in case there was no media present
during boot. This fixes bug #6130.
* Disabled debug output again.
* Fixed missing newline in debug output.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38828 a95241bf-73f2-0310-859d-f6bbb57e9c96
Some test clips with sub-title tracks would hang MediaPlayer
without this fix here.
* Optimize FindKeyFrame() and Seek(), check the range between
last requested/reported frame and bail out early with the
same result. Seems to fix MediaPlayer starting to drop frames
when it got caught up in a keyframe finding party...
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38808 a95241bf-73f2-0310-859d-f6bbb57e9c96
in many situations, FindKeyframe() was unable to reliably
predict what frame Seek() would be able to seek to.
* Refactored a new base class StreamBase from the old
StreamCookie, renamed StreamCookie to just Stream.
* In FindKeyframe(), Stream will create a "ghost" StreamBase
instance. That one will be used to actually seek in the
stream without modifying the AVFormatContext of the real
Stream. From that we can tell what position we can /really/
seek to. For AVIs mostly, it is important to still use
av_index_search_timestamp(), since for many AVIs I tested,
reading the next packet after seeking did not produce a
timestamp, however the index entry contained just the correct
one. If the next packet does contain a PTS, it will still
override the index timestamp, though.
* Contrary to my previous belief, there was still a locking
problem with how MediaPlayer used the BMediaTracks. The video
decoding thread and the playback manager both used
FindKeyframe() without holding the same lock. We support this
now by using one BLocker per Stream. (The source BDataIO is
still protected by another single lock.) With the new ghost
stream stuff, the locking problem became much more of a problem,
previously the FindKeyframe() had a much rarer race condition
which would only trip when the decoding thread would cause new
index entries to be inserted into the index.
* Use the same ByteIOContext buffer size that avformat would be
using if it initialized the ByteIOContext through other API.
* Don't leak the probe buffer in case of error.
* Don't leak the ByteIOContext buffer in the end.
* Do not discard other stream packets anymore, this makes the
ASF demuxer happy and ASF files can now be seeked as well as
with ffplay itself.
With these changes, all my MPEG test streams work. Some could be seeked
before, but would show bad artifacts. Some streams would completely loose
video after seeking once. My MPEG2 test stream works much better now,
although audio is slightly out of sync, unfortunately. All my test AVIs
work as good as before, MP4 and MKV still work perfectly. The single
test ASF I got is now perfectly seekable.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38807 a95241bf-73f2-0310-859d-f6bbb57e9c96
the new video decoding function. This just avoids a warning
generated from the libavcodec sources. The function used before
did the exact same thing...
* Maintain fStartTime correctly in _DecodeVideo(). Don't overwrite
it with a calculated starttime in Decode(). This will allow drift
to bubble up to the higher layers.
* Do not use the previously required hack to close and reopen the
AVCodec after seeking. avcodec_flush_buffers() seems to work
fine now, and for certain stream types (MPEG1, MPEG2 video for
example) the keyframe is correctly used after seeking.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38806 a95241bf-73f2-0310-859d-f6bbb57e9c96
FFmpeg. It's a bit sad, but this obsoletes pretty much all other decoder
and reader plugins. Some of them were built on external libraries as well
(AC3 (not part of default image anyway, since it's GPL), APE, MusePack),
so it's not really a big difference to using FFmpeg as external library.
The format matching is greatly simplified by using B_MISC_FORMAT_FAMILY
for everything but raw audio, and the actual FFmpeg CodecID as codec tag.
The downside of this is that the AVFormatReader can no longer be used with
other decoder plugins, but it would be easy to add special cases for native
decoders we wish to support. Obviously the out of the box support for file
formats and decoders has greatly increased with this change, so there has
to be a pretty good reason now for writing a "native" decoder or reader.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38786 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Enabled SWF demuxer in FFmpeg (though the one test file
I have is compressed, which is not supported by the FFmpeg
SWF demuxer...).
* Removed testing TODOs for demuxers that I tested.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38761 a95241bf-73f2-0310-859d-f6bbb57e9c96
itself generates.
* For GCC2, FFmpeg uses -fPIC instead of -DPIC. Also disable SSE for
GCC2, since that fixes a crash in the SSE version of clear_block().
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38747 a95241bf-73f2-0310-859d-f6bbb57e9c96
speed up VLC table (whatever it is) initialization. Somehow the code
does not work on GCC2. Use the old code we had previously in SVN
minus a flag (INIT_VLC_USE_STATIC) which is no longer used in FFmpeg.
This fixes the GCC2 build of FFmpeg and closes Ã#6643, #6582 and #656.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38746 a95241bf-73f2-0310-859d-f6bbb57e9c96
different config.h, of which I am adapting the differences in this
commit. Does not change a thing for the broken GCC2 build of FFmpeg.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38745 a95241bf-73f2-0310-859d-f6bbb57e9c96
* added more firmware to be used by the driver and updated the old one.
* avoid the switch to using ICT interrupt mode (dunno what it implies on Haiku)
* commented ieee80211_ratectl_*() calls. They can be uncommented when we support them.
* added ieee80211_ratectl.h with functions commented out
Switch to using ICT interrupt mode
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38734 a95241bf-73f2-0310-859d-f6bbb57e9c96
mpgs, the video does not recover, though.
* Remember the last reported keyframe information, so we
avoid rounding artifacts. Not as effective, since we
cannot use stream time-base for seeking, but have to use
it for finding the keyframes.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38706 a95241bf-73f2-0310-859d-f6bbb57e9c96
SeekedTo(), since it's only informative to decoders. They
can't modify the seeked frame/time. This also mirrors what
all existing decoders were doing in Seek(). BMediaTrack
is simplified accordingly (resolved two TODOs).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38705 a95241bf-73f2-0310-859d-f6bbb57e9c96
(This is just until we do proper irq-handling)
On my machines it works either way so I'd like to get feedback on this.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38695 a95241bf-73f2-0310-859d-f6bbb57e9c96
if the input format requires it. Practically,
it does not work.
* Implement the new meta-data API.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38686 a95241bf-73f2-0310-859d-f6bbb57e9c96
the stream is building the index on the fly once.
This allows to seek back to earlier positions, since
then the index will contain entries for later in the
stream and the logic to detect auto-generated indices
was broken.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38678 a95241bf-73f2-0310-859d-f6bbb57e9c96
muxer by the "default" stream. When I previously tried this,
I mistakenly remembered AV_TIME_BASE to be 1000, but it's
1000000, the same as the native bigtime_t time representation.
Luckily, we can still set all other streams (including the
"default" stream) to be discarded when obtaining chunks
packets.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38677 a95241bf-73f2-0310-859d-f6bbb57e9c96
it can be any of these values, hope the priority is right.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38659 a95241bf-73f2-0310-859d-f6bbb57e9c96
frame rate (perhaps it changed in 0.6?). This fixes
playback of several MP4 clips I have for testing.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38658 a95241bf-73f2-0310-859d-f6bbb57e9c96
the counters, so it's not the average for the entire
decoding time, but for the last five frames. This gives
a more accurate picture of what's going on.
* Added NOTE about possibly removing the SWS version of the
colorspace conversion code unless it's used for otherwise
unsupported conversions. David's code is about 40% faster
in my tests (nice job!).
* Free the sws context in NegotiateVideoFormat, if necessary.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38651 a95241bf-73f2-0310-859d-f6bbb57e9c96
of support for these codecs and demuxer in the FFmpeg plugin. The
ogg test streams I downloaded play fine now. For example, Big Buck Bunny
would play without video before and ogg files natively encoded with the
FFmpeg plugin wouldn't play at all. Since the removed plugins were not
maintained and were based on external libs themselves, I didn't see the
point in keeping them.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38646 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Enabled ogg muxer in MuxerTable.
ogg/vorbis creation successfully tested with MediaConverter.
ogg/theora needs more testing, it seems to work, but I need
to switch from the other vorbis/theora/ogg plugins to the
FFmpeg built-in support, otherwise the current theora stream
is not supported by the old plugin.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38641 a95241bf-73f2-0310-859d-f6bbb57e9c96
in order not to clash with the old libtheora in the theora plugin.
x86 CPU optimizations are only compiled for GCC4.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38640 a95241bf-73f2-0310-859d-f6bbb57e9c96
in order not to clash with the old libvorbis in the vorbis plugin. I plan to remove
that one after I've done more testing.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38639 a95241bf-73f2-0310-859d-f6bbb57e9c96
float_to_int16_interleave_sse, since it crashes for reasons
I would have no clue about. Fixes a few duplicated tickets,
which I'll have to sort out later.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38636 a95241bf-73f2-0310-859d-f6bbb57e9c96
The changes looks reasonable, although I don't have VMWare to test with.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38602 a95241bf-73f2-0310-859d-f6bbb57e9c96
This might help with ACPI shutdown issues, if not this change can be reverted. Not verified as it works on all my machines even without this.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38585 a95241bf-73f2-0310-859d-f6bbb57e9c96
source are instead conditionally included by other source code.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38582 a95241bf-73f2-0310-859d-f6bbb57e9c96
Add the new vp3dsp_altivec.c, though.
Should fix the ppc build.
*Untested*
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38581 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Tested and checked most features and fs operations, while passing successfully the Linux fsck. Though the implementation still needs more testing and is to be used with
caution, it's better in my mind to have the code committed now given the size of the patch.
* Code style isn't extensively checked but is mostly OK. Code review is welcome.
Some notes from Janito:
* Sparse files aren't supported and hard links aren't supported. Write attributes methods aren't activated nor tested.
* Journaling needs more testing to make sure it behaves in a compatible way to Ext3, and support for the different modes hasn't been implemented (due to the block
and file cache incompatibility). Correct revoke management is also lacking, as is proper management of the superblock state and copies and block group copies.
* The code is partly based and inspired by the BFS implementation. Author information might need to be fixed.
I'd like to congratulate and thank Janito for his hard work to bring the implementation to the current state. I hope he'll keep on maintaining it and become a regular
contributor/committer.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38573 a95241bf-73f2-0310-859d-f6bbb57e9c96
in a CONFIG_GPL #ifdef (should be upstreamed, actually). This fixes
the GCC2 build (and probably GCC4) if the Haiku build is not configured
to include GPL add-ons.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38563 a95241bf-73f2-0310-859d-f6bbb57e9c96
GPL code is enabled or not. We need to build it in either case.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38561 a95241bf-73f2-0310-859d-f6bbb57e9c96
FFmpeg plugin, which now works for much more files
in my testings.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38556 a95241bf-73f2-0310-859d-f6bbb57e9c96
using vendor branches properly... I remember having to make this change
before... GCC2 build goes much further now, investigating next problem.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38554 a95241bf-73f2-0310-859d-f6bbb57e9c96
with regards to using the wrong #include scope in one file and disabling two
apparently unmaintained asserts when compiling in DEBUG mode). I didn't yet test
the GCC 2 build, but I need to get this into SVN since I am having some annoying
file corruption troubles. In fact I am hoping I am not commiting broken files,
but a few seconds ago everything was still building cleanly. One thing that definitely
improved is the (disabled at the moment) AVI support. Every clip I tested so far
plays, which can't be said about our native AVI reader. With the previous FFmpeg
version (a random SVN revision is my guess), many old AVIs played completely broken.
So far, I have not spotted any regressions
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38548 a95241bf-73f2-0310-859d-f6bbb57e9c96
object. Demuxers may actually resize the I/O context buffer,
which would corrupt memory. This is certainly the case in FFmpeg
0.6, don't know if it was a problem before.
* Do not set the time to the packet PTS in Seek(), if it's the magic
value for "no PTS".
* Don't regard the AVInputFormat flags (generic index), we can detect
this more reliably by the observed behavior: Don't trust the found
keyframe if we are obvioulsy building the keyframe index on the fly.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38545 a95241bf-73f2-0310-859d-f6bbb57e9c96
Matroska support in the FFmpeg plugin. I have a few streams
to test with, most didn't play right with the Matroska reader,
many simply crash. With the FFmpeg matroska support, most files
do play fine. Seeking the audio stream is a problem, in that
the FFmpeg code does not build the index for the audio stream,
and so seeking always falls back to regions of the file that
have already played. The audio will catch up eventually and
playback will be fine again. A minority of files I could test
with don't work right, those seem all to be older files.
Overall, the support for Matroska files has much improved
with this commit. I am still investigating why FFplay has
no trouble seeking in mkv files, while the FFmpeg plugin only
seeks perfectly in video streams. It may be a problem that
the FFmpeg plugin uses completely separate AVFormatContexts
for each stream, which on the other hand allows to seek BMediaTracks
independently from each other and resolves concurrency issues.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38541 a95241bf-73f2-0310-859d-f6bbb57e9c96
of the thread related methods.
* Explicitely reset the fThread member in
_StopOutputThread().
* Added TODO about the somewhat seemingly fragile method
to ensure the previous buffer for a channel has
been processed.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38527 a95241bf-73f2-0310-859d-f6bbb57e9c96
crashes. In some MKVs I have, the FFmpeg implementation
behaves badly when the stream switches from stereo to 6-channel
(weird, but can apparently happen). So simply don't claim
support for AC3, since we have a "native" AC3 decoder which
works much better.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38524 a95241bf-73f2-0310-859d-f6bbb57e9c96
- Use old ActivateWindow implementation till the Desktop SendBehind question is solved.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38508 a95241bf-73f2-0310-859d-f6bbb57e9c96
returns a frame, and using that very same frame again
for FindKeyFrame() returns a different frame, because
the rounding effects have converted the time to be smaller
than the timestamp that was found for the first call to
FindKeyFrame(). It still happens sometimes, but a lot less
frequently. Ideas appreciated. :-)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38504 a95241bf-73f2-0310-859d-f6bbb57e9c96
could be used.
* Finding keyframes is unreliable. Sometimes the index
is built on the fly, without us knowing. The file will
become seekable after we have decoded those parts.
This however means that seeking may not have been successful.
To know the seeked to frame, we extract the next packet
and returned the true current frame in the in/out arguments
to seek.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38497 a95241bf-73f2-0310-859d-f6bbb57e9c96
* When the client didn't suggest it, take the sample
size into account.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38494 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Enabled the DTS decoder. The codec tag is fake,
but as long as Readers use this, it will work.
Currently only works with the FFmpeg reader, though,
and I tested only with matroska containers.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38493 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Reordered some methods in the source to align with declaration order.
* Applied naming conventions for private methods.
* Switched asterix style in MixerInput.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38488 a95241bf-73f2-0310-859d-f6bbb57e9c96
settings. (There is a common "mixing frame rate" to which all inputs
resample, before the MixerCore resamples to the frame rate of the
output.)
* Some more coding style fixes in MixerCore.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38479 a95241bf-73f2-0310-859d-f6bbb57e9c96
- Use more title space in stacked tabs.
- Fix tab movement in stacked mode.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38475 a95241bf-73f2-0310-859d-f6bbb57e9c96
accepted. This should have been the reason for Duggan's problem with DHCP
as part of bug #6454.
* Stippi's router seems to answer DHCP requests with broadcasts to the future
broadcast IP address. Luckily, it's also a link layer broadcast, so we let
the upper protocols decide what to do with it, depending on that; this could
also be done depending on the existence of any unconfigured networks.
* This should fix Stippi's DHCP problems, and therefore bug #6454 - in any
case, this will be the last try before my vacation :-)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38450 a95241bf-73f2-0310-859d-f6bbb57e9c96
with the name "abc" existed, it would be returned when opening any attribute
starting with "abc".
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38432 a95241bf-73f2-0310-859d-f6bbb57e9c96
This fixes (a harmless) out of bounds array access, and CID 1359.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38423 a95241bf-73f2-0310-859d-f6bbb57e9c96
Note this leads to KDL if there is a write error, so it may not be the best way for a floppy...
This allows the driver to uninitialize properly when all devices are unplugged, which in turns permits updating the driver without rebooting to unload it.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38410 a95241bf-73f2-0310-859d-f6bbb57e9c96
discovered by Coverity for some reason): commands without arguments would
overwrite memory (in this case the sConsole::arg_count only, though).
* Travis's copyright was missing in blue_screen.cpp.
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38409 a95241bf-73f2-0310-859d-f6bbb57e9c96
The floppy icon is based on zumi's one. changes done :
* I made the floppy a bit thinner, it looked more like a zip100 cartridge
* I added an USB logo (or something that more or less looks like one) on the floppy label
* The logo only shows at big icon sizes since I couldn't get it looking good at small ones.
Feel free to improve.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38407 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Write operation will always return an error, one needs to send request sense until the write is actually done.
This gets floppy writing working.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38406 a95241bf-73f2-0310-859d-f6bbb57e9c96
This gets read capaity working, the device shows up in drivesetup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38404 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Removed the mp3_reader and mp3_decoder from the image and from
the source tree even. The mpeg123lib based decoder was crashy,
since the lib didn't cope with bad input data too well, whatever
the reason, but bad input can also be a specially crafted file.
I didn't see the value in keeping two decoders around that use
a third party library as backend. While reading in the mp3_decoder
code, I even saw that it used global variables in the mpeg123 lib
to figure out framerate and channel count, after decoding a bit of
input. Obviously this has concurrency issues.
* Removed the mp4_reader from the image. It is native code, and should
perhaps be preferred over imported code, but I don't have the
resources to look into it, and David doesn't seem to have the time
either. There are basically three types of problems with the
native mp4 reader: 1) It is way too CPU intensive. I have many HD
files that don't play at all, since there is not enough time left
for actual decoding. 2) Seeking leaves a lot of visual artifacts
(with the very same decoder plug-in), since there seems something
wrong either with finding true keyframes, or with flushing buffers
correctly. And 3) very often audio stops working at all after
seeking. Sometimes a keyframe is returned for audio which is very
far away from the wanted frame, which currently triggers bad
behavior in the audio producer node in MediaPlayer and can even
crash the media_addon_server. With the ffmpeg based mp4 reader,
none of these problems exist: Seeking is perfect, no artifacts,
CPU load is low enough for pretty much all HD clips I tested with,
and audio always works and is always in perfect sync with the video
after seeking.
If there are regressions after this commit at all (I tested a lot of
files), then I anticipate only that the ffmpeg plugin does not advertise
support for files it could actually handle (i.e. easily fixable). In
those cases hopefully a test stream can be made available. If the
native mp4 reader is improved to the point that it works as well as
the ffmpeg mp4 demuxer, we can easily switch it back, but for now, users
will prefer reliable playback.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38403 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Ask the drive for its status after each command we send, or else it locks up
THis get us as far as trying to read the drive capacity, but this still fails for some reason.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38402 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Output more information in AVFormatReader::StreamCookie::Open(),
AVInputFormat flags for example.
* Added CODEC_ID_AAC handling when codecTag is 0. Adds support
for AAC in Matroska containers when the ffmpeg plugin is enabled
to handle those.
* Added some rounding to frame<->time conversions.
* AVFormatReader::StreamCookie::Seek() forgot to pass the seek
flags to av_seek_frame().
* The most important fix is this, though: There are formats which
build the keyframe index on the fly, while parsing the stream!!
These means we can only seek to real keyframes for parts of the
stream that has already been decoded. Handle this situation by
assuming we can seek to the requested frame/time. This change
fixes the use of the AVFormatReader as MP3 reader.
* Anothe important fix is to ignore the nb_frames member of the
stream for the total frame count. This makes MP4 movies
also work perfectly now when the AVFormatReader is used for them.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38401 a95241bf-73f2-0310-859d-f6bbb57e9c96
gives the deprecated warning... We need to cache an AVPacket for this.
* Check the allocation of fOutputBuffer.
* When seeking, we need to flush the already decoded stuff
in fOutputBuffer, and throw away the last chunk buffer as well.
* Handle an incomplete input format at least to the point of not
crashing with a divide error (mp3_reader would give us such an
incomplete format for example).
* _DecodeAudio():
- Fixed some edge cases in the audio decoding loop: avcodec_decode_audio3()
can return a 0 length, which means no error, but no decoded frames
either. ffplay throws away the chunk in this case, do the same.
- Convert some invalid situations that were printf()s into debugger()s.
- Add much more comments to explain how everything works.
* Fixed the occasional coding style issue.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38400 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Move the interrupt stuff inside the device structure
* Some cleanup, added some more tracing fordebug purposes.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38399 a95241bf-73f2-0310-859d-f6bbb57e9c96
to endpoints. This should help with the final issues of bug #6454.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38397 a95241bf-73f2-0310-859d-f6bbb57e9c96
layer.
* Converted the hash used to the BOpenHashTable instead of khash.
* Fixed remaining GCC4 warnings.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38391 a95241bf-73f2-0310-859d-f6bbb57e9c96
* When writing encoded audio, we were leaking one
temporary buffer per chunk.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38388 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Check for errors using != instead of < - the functions are not supposed to
return anything above B_OK.
* Use the stack-wide ENABLE_DEBUGGER_COMMANDS instead of our own local solution.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38386 a95241bf-73f2-0310-859d-f6bbb57e9c96
This is loosely based on usb_disk, but uses a different protocol for sending the commands.
Refactoring is unfinished, so don't look at the style too muh, it will e fixed and cleaned up later.
Basic communication with the drive works (sending commands). Command themselves still mostly untested.
Command Blocks sent to the drive are most likely wrong and may erase your floppies or do any other weird things!
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38379 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Made sure the 80 character per line limit is honoured.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38370 a95241bf-73f2-0310-859d-f6bbb57e9c96
correctly.
* This should finally fix ticket #6454, but I keep it open until it's confirmed.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38365 a95241bf-73f2-0310-859d-f6bbb57e9c96
didn't do that for broadcasts - this is still not a full solution as it won't
work for link layer broadcasts, but this should fix most DHCP problems.
* IPv4 multicast doesn't do that yet.
* Only send ICMP errors if it hasn't been a link layer broadcast.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38356 a95241bf-73f2-0310-859d-f6bbb57e9c96
DatagramSocket::AvailableData() locks; introduced a UdpEndpoint::Dump() method
to work around that.
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38355 a95241bf-73f2-0310-859d-f6bbb57e9c96
This allows to use lower resolution screen modes with black border.
Added a set of TODOs :
* The smaller scren is not centered, but aligned top-left
* The base resolution used is the one reported from edid 1.1, because I'm still not sure how to parse EDID 1.2. This resolution is too small on my laptop, but it works.
Also added two ways of setting 8-to-6 dithering for 18-bit LVDS panel. No visible result for me, unfortunately.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38354 a95241bf-73f2-0310-859d-f6bbb57e9c96
The future cookie was leaked in three of four error scenarios.
Backported from grackle.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38345 a95241bf-73f2-0310-859d-f6bbb57e9c96
Based on Motorola MPC106 User Manual and NetBSD's
src/sys/arch/macppc/pci/grackle.c 1.11. The MPC106 apparently deviates by
requiring the E (enable) bit set to 1 for config read/write to work.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38344 a95241bf-73f2-0310-859d-f6bbb57e9c96
First B_MEDIA_SEEK_TO_FRAME was handled to compute a time, then
it was ignored and frame was used as time stamp. Also the
conversion from frame to time had the num and den members of
the time base swapped in the computation, so it computed
bogus time stamps. Refactored the conversion methods, always
seek based on the time. Needs more testing (perhaps there are rounding
issues), but overriding a lot of native reader implementations with
AVFormatReader holds up very well now with a lot of files I tested.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38332 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Read the EDID info on both port A (analog VGA monitor) and C (LVDS panel)
* If an LVDS panel is detected, report the EDID resolutions instead of the BIOs settings
This fixes#6326, likely #5096, and possibly some others intel_extreme problems. Please test.
On the other hand, this make the screen preflet show the full list of more reported by the LVDS panel. As we don't support
scaling, some of these modes are unuseable and lead to a garbled screen.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38329 a95241bf-73f2-0310-859d-f6bbb57e9c96
A grackle-compatible Motorola MPC106 PCI controller can be found in the
PowerMac G3 (ticket #6247). For now just let the user know.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38323 a95241bf-73f2-0310-859d-f6bbb57e9c96
problem (since + binds stronger than >>)
Stephan: please review, esp since I don't know how to test this!
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38279 a95241bf-73f2-0310-859d-f6bbb57e9c96
Stephan: please yell if you dislike the formatting of the large expressions now
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38278 a95241bf-73f2-0310-859d-f6bbb57e9c96
* make BDADDR_* macros refer to value types instead of addresses
* adjust all interfaces using bdaddr_t* to use (mostly const) refs instead,
which IMHO makes the interface & code clearer
* that got rid of a couple of const incorrectness casts
* some cleanup along the way
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38265 a95241bf-73f2-0310-859d-f6bbb57e9c96
Fix some more #pragma export warnings treated as errors on ppc.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38258 a95241bf-73f2-0310-859d-f6bbb57e9c96
constants, which had to be defined in several places in order to be available
in the kernel addons, network protocols and the server/kit.
* enable -Werror for all servers
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38213 a95241bf-73f2-0310-859d-f6bbb57e9c96
It makes it easier and less confusing to test catalogs without linking them.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38183 a95241bf-73f2-0310-859d-f6bbb57e9c96
the crashing bug reported by Atis when trying to add an interface which fails
(the bug causing this has already been fixed with the previous commit).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38180 a95241bf-73f2-0310-859d-f6bbb57e9c96
really be deleted (a reference of them was kept in memory).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38179 a95241bf-73f2-0310-859d-f6bbb57e9c96
it once more. This should be the final nail on bug #6446.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38178 a95241bf-73f2-0310-859d-f6bbb57e9c96
Cast uint32* arguments for atomic_or() to int32*.
Resolves warnings treated as errors for Big Endian targets.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38128 a95241bf-73f2-0310-859d-f6bbb57e9c96
Cast further pointer arguments for B_HOST_TO_LENDIAN_INT32 to uint32.
Resolves warnings treated as errors for Big Endian targets.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38127 a95241bf-73f2-0310-859d-f6bbb57e9c96
#6446, although I could not reproduce the exact problem.
* net_datalink::is_local_[link_]address() now releases a previous reference if
the _interfaceAddress arguments does not point to NULL.
* When a buffer is received from a device, it's interface_address should be NULL
already.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38118 a95241bf-73f2-0310-859d-f6bbb57e9c96
Cast pointer arguments for B_HOST_TO_LENDIAN_INT32 to uint32.
Resolves warnings treated as errors for Big Endian targets.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38114 a95241bf-73f2-0310-859d-f6bbb57e9c96
that caused the change (but that has not actually been changed yet).
* Also, it will now reset the INADDR_ANY local address in case there is no
other address configured. This should help with automatic configuring after
deletion of an interface address (though it doesn't seem to work yet for
some other reason, at least in VMware).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38110 a95241bf-73f2-0310-859d-f6bbb57e9c96
Cast return value of __swap_int32 to uint32_t, as suggested by Ingo.
Remedies uint32 %08x warnings treated as errors in the Big Endian code path.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38106 a95241bf-73f2-0310-859d-f6bbb57e9c96
change the current MII management, but I ran out of time.
* This should fix bug #6295.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38078 a95241bf-73f2-0310-859d-f6bbb57e9c96
as well (of course, no address is created automatically here).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38058 a95241bf-73f2-0310-859d-f6bbb57e9c96
now has an almost equivalent logic to the old setters like SIOCSIFADDR.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38054 a95241bf-73f2-0310-859d-f6bbb57e9c96
they will no longer be unset - instead they are set with defaults.
* If B_SOCKET_SET_ALIAS gets an index of -1, it will now try to find the local
address, and if that fails, will just use the first address there is.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38053 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Not plugged anywhere yet.
* I'm not sure the downsampling is done properly, either.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38037 a95241bf-73f2-0310-859d-f6bbb57e9c96
it's not needed for locally received buffers. This fixes a doubled
initialization for a single device when there is more than a single domain
involved. Reported by Atis.
* Fixed missing call to unregister_device_deframer() in case there was not
enough memory to allocate the loopback_frame_protocol object.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38002 a95241bf-73f2-0310-859d-f6bbb57e9c96
"clicks" field of the mouse message as everywhere else.
* Renamed Decorator::Clicked() to MouseAction().
* Minor style cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37996 a95241bf-73f2-0310-859d-f6bbb57e9c96
the buffer, and we also need to release it when freeing it.
* Adapted patch by Atis: append_cloned_data() now preserves the stored header;
this is kind of bad, because it will not notice if the original header is
removed, but this could probably just be documented this way.
* Also print the reference count of the interface addresses.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37993 a95241bf-73f2-0310-859d-f6bbb57e9c96
in order to be able to use SIOCSIFADDR (and friends) on a net yet added
family superfluous; we now add a new address when needed on the fly.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37990 a95241bf-73f2-0310-859d-f6bbb57e9c96
using it - hopefully, that is actually correct (it's adopted from FreeBSD).
* Fixed bug that cut off the sockaddr_dl reported by the system, so that DHCP
wouldn't work anymore (and ifconfig wouldn't show the actual MAC address
anymore).
* Changed the listing code to actually pad to ifreq size, and leave the length
of the sockaddr untouched.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37941 a95241bf-73f2-0310-859d-f6bbb57e9c96
sockaddr_storage here (wasn't that bad before, as ifreq has a 30 bytes buffer
after the sockaddr.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37940 a95241bf-73f2-0310-859d-f6bbb57e9c96
effectively rejecting any try to set an address.
* It now copies the new address as well in order to make sure that its
sa_len field is set correctly.
* Improved debug output.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37937 a95241bf-73f2-0310-859d-f6bbb57e9c96
smaller than sizeof(sockaddr). This fixes a compatibility issue with other
platforms - portable software often assumes that the amount of bytes to
add to an ifreq structure is the larger amount between sizeof(ifreq), and
basically what the _SIZEOF_ADDR_IFREQ() macro returns, instead of always
relying on that macro.
* Renamed UserBuffer::Copy() to Push, ConsumedAmount() to BytesConsumed(),
added Pad() method.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37927 a95241bf-73f2-0310-859d-f6bbb57e9c96
arp_update_entry() for known entries, as it also uses that to update the
timestamp.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37923 a95241bf-73f2-0310-859d-f6bbb57e9c96
old address is NULL for anything but SIOCAIFADDR. Hopefully, this fixes the
problem Rene is seeing.
* Make sure that arp_entry::protocol is not NULL before using it. This is
necessary because of the possibility to manually set ARP entries.
* Further improved debug output.
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37916 a95241bf-73f2-0310-859d-f6bbb57e9c96
* made FAT add-on use get_timezone_offset(), this time correctly adjusted for
the difference in units (minutes/seconds)
This makes the times in our FAT-fs agree with Linux again, at least :-)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37905 a95241bf-73f2-0310-859d-f6bbb57e9c96
This enable to actually detect and handle device removal (USB...).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37897 a95241bf-73f2-0310-859d-f6bbb57e9c96
* dropped DaylightSavingTime from real_time_clock code in kernel, it was
never really being used for what it meant (and just being referred to by
gettimeofday(), which put a different meaning to it
* adjusted the syscalls get_timezone() & set_timezone() as well as their callers
accordingly
* got rid of get_rtc_info() and rtc_info struct in kernel, as it was only
being referred to by the FAT add-on and that one (like gettimeofday()) put a
different meaning to tz_minuteswest. Added a comment to FAT's util.c
showing a possible solution, should the hardcoded GMT timezone pose a problem.
* fixed declaration of gettimeofday() to match POSIX base specs, issue 7
* changed implementation of gettimeofday() to not bother trying to fill struct
timezone - it was using wrong values before, anyway.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37888 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Made the return type of remove_interface() void, as it cannot fail.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37884 a95241bf-73f2-0310-859d-f6bbb57e9c96
global name space, and have ugly identifiers for nothing :-)
* Added a flags field to struct ifaliasreq. Added flags to mark an alias that
is currently being configured, or has been automatically configured.
Those flags aren't used yet, but they will replace IFF_CONFIGURING and
friends.
* Implemented deleting addresses only from interfaces via ifconfig.
* Added more command aliases for delete to ifconfig ("del", and "delete", for
more consistency with route).
* Fixed control_routes() to only release a reference to an address if it
actually got one before.
* If an interface address is deleted, its routes are now removed as well.
* InterfaceAddress now holds a reference to its interface as planned.
* Implemented removing interfaces. Works quite nicely.
* When downing an interface, all of its routes are now removed. When upping
it again, at least the default routes are added.
* datalink.cpp's get_interface_name_or_index() leaked a reference to the
interface found.
* SIOCAIFADDR would also leak a reference when new addresses were added.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37872 a95241bf-73f2-0310-859d-f6bbb57e9c96
send_datagram() to send_data().
* Renamed DatagramSocket::SocketEnqueue() to EnqueueClone(), SocketDequeue()
to Dequeue().
* Ordered the methods in ProtocolUtilities.h according to their declaration.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37870 a95241bf-73f2-0310-859d-f6bbb57e9c96
type one wants to receive. Changed ipv6_datagram to use that (but note that
it currently does not compile).
* Header cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37868 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Since they all work reasonalbly well, add them to the default image. (beOs had them after all)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37864 a95241bf-73f2-0310-859d-f6bbb57e9c96
receive raw packets (only without the ethernet framing).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37853 a95241bf-73f2-0310-859d-f6bbb57e9c96
interface_protocol_send_data() which accessed the monitors unlocked.
* Changed SIOCCPACKETCAP to check if the device name matches the one used with
SIOCSPACKETCAP.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37845 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Got rid of datalink.h.
* Only allow sending/receiving of packets through AF_LINK for root (not that
sending would be implemented yet).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37844 a95241bf-73f2-0310-859d-f6bbb57e9c96
SIOC_IF_ALIAS_ADD, SIOC_IF_ALIAS_REMOVE, SIOC_IF_ALIAS_GET, SIOC_ALIAS_SET,
and SIOC_IF_ALIAS_COUNT.
* Implemented all of those new ioctls, though they are yet untested.
* Added ifreq::ifr_data, and removed the hack in the FreeBSD compat if.h
header.
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37806 a95241bf-73f2-0310-859d-f6bbb57e9c96
* The is_empty_address() function of AF_UNIX did not deal correctly with empty
addresses.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37804 a95241bf-73f2-0310-859d-f6bbb57e9c96
interface - this caused quite a number of changes.
* Network interfaces, and its addresses are now reference counted (not yet
complete, though, InterfaceAddresses need to hold references to their
interface as well).
* There are two known regressions of this commit that I will fix later:
- you cannot remove interfaces anymore
- IPv4 multicast was broken anyway, but now it's disabled, too.
* Moved a device_interfaces.cpp|h out of interfaces.cpp.
* The datalink layer chain is now instantiated per domain per interface,
not just per interface anymore.
* When a buffer reaches the network layer, it has no known interface yet, ie.
the ipv4|6|whatever modules need to set this manually.
* Added more debug output, and some new debugger commands, the control option
is now printed in clear text.
* Added hash_address() function to the address modules. Added "const" to
set_to_defaults() where needed.
* Fixed net_buffer's restore header functions offset use as reported by Atis.
* Improved buffer dump output, use the domain module to print the address if
available.
* Moved net_buffer::type into the union, as it's not needed by the upper layers
anymore.
* Moved IPv6 specific code from {add|remove}_default_route() to where it
belongs, but disabled it for the time being.
* Completely discarded useless ipv4_datagram module.
* Added ping6 to the build.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37794 a95241bf-73f2-0310-859d-f6bbb57e9c96
