* Rename init_sse to init_fpu and handle FPU setup.
* Stop trying to set up FPU before VM init.
We tried to set up the FPU before VM init, then
set it up again after VM init with SSE extensions,
this caused SSE and MMX applications to crash.
* Be more logical in FPU setup by detecting CPU flag prior
to enabling FPU. (it's unlikely Haiku will run on
a processor without a fpu... but lets be consistant)
* SSE2 gcc code now runs (faster even) without GPF
* tqh confirms his previously crashing mmx code now works
* The non-SSE FPU enable after VM init needs tested!
This allows to use the debug features of the guarded heap also on
allocations made through the object cache API. This is obivously
horrible for performance and uses up huge amounts of memory, so the
initial and grow sizes are adjusted accordingly.
Note that this is a rather simple hack, using the object_cache pointer
to transport the allocation size. The alignment is neglected completely.
This adds a pair of functions vm_prepare_kernel_area_debug_protection()
and vm_set_kernel_area_debug_protection() to set a kernel area up for
page wise protection and to actually protect individual pages
respectively.
It was already possible to read and write protect full areas via area
protection flags and not mapping any actual pages. For areas that
actually have mapped pages this doesn't work however as no fault, at
which the permissions could be checked, is generated on access.
These new functions use the debug helpers of the translation map to mark
individual pages as non-present without unmapping them. This allows them
to be "protected", i.e. causing a fault on read and write access. As they
aren't actually unmapped they can later be marked present again.
Note that these are debug helpers and have quite a few restrictions as
described in the comment above the function and is only useful for some
very specific and constrained use cases.
They can be used to mark pages as present/non-present without actually
unmapping them. Marking pages as non-present causes every access to
fault. We can use that for debugging as it allows us to "read protect"
individual kernel pages.
* The vm86 code or the code running in virtual 8086 mode may clobber the
%fs register that we use for the CPU dependent thread local storage
(TLS). Previously the vm86 code would simply restore %fs on exit, but
this doesn't always work. If the thread got unscheduled while running
in virtual 8086 mode and was then rescheduled on a different CPU, the
vm86 exit code would restore the %fs register with the TLS value of
the old CPU, causing anything using TLS in userland to crash later on.
Instead we skip the %fs register restore on exit (as do the other
interrupt return functions) and explicitly update the potentially
clobbered %fs by calling x86_set_tls_context(). This will repopulate
the %fs register with the TLS value for the right CPU. Fixes#8068.
* Made the static set_tls_context() into x86_set_tls_context() and made
it available to others to faciliate the above.
* Sync the vm86 specific interrupt code with the changes from hrev23370,
using the iframe pop macro to properly return. Previously what was
pushed in int_bottom wasn't poped on return.
* Account for the time update macro resetting the in_kernel flag and
reset it to 1, as we aren't actually returning to userland. This
didn't cause any harm though as only the time tracking is using that
flag so far.
* Some minor cleanup.
* AVLTreeMap::_GetKey(): Change return type from const Key& to Key, so
the strategy can do that as well and doesn't have have a Key object in
the node.
* Fix the Auto strategy: It was using the undefined _GetKey() instead
of GetKey().
both:
* Add Previous()/Next().
* Add Insert() version that returns a Node* instead of an Iterator.
* Add Remove() version that takes a Node* instead of a key.
TwoKeyAVLTree:
* Add GetIterator() version that takes an additional Node*, i.e.
initializing an iterator to point to the node.
* Add Iterator::CurrentNode().
This is a tree implementation with elements with primary and secondary
key. The code is a cleaned up version of ramfs's implementation. ramfs
doesn't use this version yet.
* Add support function vfs_get_mount_point(), so a file system can get
its own mount point (i.e. the node it covers). Re-added
fs_mount::covers_vnode for that purpose -- the root node isn't know to
the VFS before the mount() hook returns.
* Add function vfs_bind_mount_directory() which bind-mounts a directory
to another. The Vnode::covers/covered_by mechanism is used, so this
isn't true bind-mounting, but sufficient for what we need ATM and
cheaper as well. The vnodes connected thus aren't tracked yet, which
is needed for undoing the connection when unmounting.
* get_vnode_name(): Don't use dir_read() to read the directory. Since we
have already resolved vnode to the covered vnode, we don't want the
dirents to be "fixed" to refer to the covering nodes. Such a vnode
simply wouldn't be found.
* Introduce Vnode flags for covered and covering. Can be used as a quick
check when one doesn't already hold sVnodeLock.
* Rename resolve_mount_point_to_volume_root() to
resolve_vnode_to_covering_vnode().
* Adjust all code that deals with transitions between mount points and
volume root vnodes to generally support covered/covering vnodes.
CFE is used in the upcoming Amiga X-1000 dualcore PPC board.
* Largely inspired by the OF and U-Boot code.
* Still largely stubbed out.
* The loader builds but I don't have a machine to test it. Anyone interested?
of the slab code. It is generic as it only contains the link to a tracing entry
and not any application specific info.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@43188 a95241bf-73f2-0310-859d-f6bbb57e9c96
While structs looked cleaner at first sight, it didn't really was any simpler.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@43140 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Turn VMCache::consumers C list into a DoublyLinkedList.
* Use object caches for the different VMCache types and the VMCacheRefs.
The purpose is to reduce slab area fragmentation.
* Requires the introduction of a pure virtual VMCache::DeleteObject()
method, implemented in the derived classes.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@43133 a95241bf-73f2-0310-859d-f6bbb57e9c96
template function object_cache_delete() to be used to delete objects
constructed with it.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@43132 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Introduce TracingMetaData::IsInBuffer() to validate that a certain memory
range is within the valid tracing buffer limits.
* Use that when validating in tracing_is_entry_valid() before trying to access
the entry, resolving a TODO.
* Validate the candidate time against the handed in time (if specified) as an
additional check.
* Tiny unrelated text cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@43116 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Add TraceOutput::PrintArgs(), a va_list version of Print().
* Move code of TraceOutput::Print() to new private template function
print_stack_trace().
* Add public tracing_print_stack_trace().
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@43085 a95241bf-73f2-0310-859d-f6bbb57e9c96
Add helper macros for placing markers in the source, so we can get the
address ranges of code we're interested in.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@43071 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Move struct tracing_stack_trace to tracing.h header.
* Add tracing_find_caller_in_stack_trace(). Helper function to get the
first return address of a stack trace that is not in one of the given
address ranges.
* Add AbstractTracingEntryWithStackTrace::StackTrace() getter.
* Add tracing_is_entry_valid(). Checks, based on the additionally given
time, whether a tracing entry is (probably) still in the tracing
buffer.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@43070 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Introduce "paranoid" malloc/free into the slab allocator (initializing
allocated memory to 0xcc and setting freed memory to 0xdeadbeef).
* Allow for optional stack traces for slab object cache tracing.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@43046 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Add an AbstractTraceEntryWithStackTrace that includes stack trace handling.
* Add a selector macro/template combo to conveniently select the right base
class depending on whether stack traces are enabled or not.
* Minor style cleanups.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@43045 a95241bf-73f2-0310-859d-f6bbb57e9c96
Add a DoublyLinkedList::Contains() method to check if a list contains a certain
element.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@43043 a95241bf-73f2-0310-859d-f6bbb57e9c96
be used to mark certain io interrupt vectors as reserved and to allocate from
the still free ones. It is a kernel private API for now though.
* Make the MSI code use that functionality instead of implementing its own which
slims it down considerably and also removes quite a bit of hardcoded knowledge
about the interrupt layout that didn't really belong there.
* Mark the various in-use interrupts as reserved from the components that
actually know about them (PIC, IO-APIC, SMP, APIC timer and interrupt setup).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42832 a95241bf-73f2-0310-859d-f6bbb57e9c96
to a panic at boot.
* Make the panic message more explicit when there is no more room left.
This should hopefully fix#7869.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42715 a95241bf-73f2-0310-859d-f6bbb57e9c96
directory of a file without traversing leaf links (just like lstat()).
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42620 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Rename of_support.h/cpp back to support.cpp as per Axel
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42498 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Rename a few variables to make more sense
* OF_FAILED is a signed int.. fix return of of_address_cells
* OF_FAILED is a signed int.. fix return of of_size_cells
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42497 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Add header file to support of_support.cpp
* Add support functions to obtain address and size cell lengths
* Small style cleanups
* Add support for G5 PowerPC cpus...
* Refactor memory region code to be aware of 64-bit OF addresses.
As-is the boot loader wouldn't start on G5 systems because
OpenFirmware memory base addresses are stored as two 32-bit
unsigned int 'cells' vs one 32-bit unsigned int 'cell' on G3/G4.
I removed the static struct and replaced it with a template
and pass uint32 or uint64 depending on the address cell size.
Thanks for the idea DeadYak!
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42486 a95241bf-73f2-0310-859d-f6bbb57e9c96
exit info with some generic status.
* team_create_thread_start(), common_thread_entry(): Initializes the team's
exit info (if that's the main thread) before calling thread_exit(). Fixes
#7686.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42183 a95241bf-73f2-0310-859d-f6bbb57e9c96
partition_module_info::uninitialize().
* Implemented the hook for BFS.
* Implemented KFileSystem::Uninitialize().
Fixes failure to initialize a BFS initialized device with an intel partition
map.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42142 a95241bf-73f2-0310-859d-f6bbb57e9c96
destroy the partitioning system's on-disk structure.
* Adjusted the existing partitioning system implementations accordingly.
Actually implemented the hook for the intel partitioning system.
* Added Uninitialize() method to KDiskSystem and KPartitioningSystem. The latter
implements the method calling the new module hook.
* _user_uninitialize_partition(): Also let the disk system uninitialize the
on-disk structure.
This fixes the failure to initialize a disk device with BFS, when it contains a
valid partition map with at least one partition.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42140 a95241bf-73f2-0310-859d-f6bbb57e9c96
its size.
* Added "Display current boot loader log" item to the "Debug Options" boot
loader menu. It displays what the boot loader has logged so far. Might be
interesting for early boot issues when serial debugging is not possible.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42134 a95241bf-73f2-0310-859d-f6bbb57e9c96
* If we detect ACPI 2.0 or higher, the spec says we should use the XSDT rather
than the RSDT. Attempt to do so, falling back to the RSDT if the former fails
to be mapped/validated.
* Refactored acpi_find_table into a templated version to account for the fact
that the XSDT exports different pointer widths for its links to other tables
than the RSDT.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42133 a95241bf-73f2-0310-859d-f6bbb57e9c96
which don't wait for a character, but return -1 when no character is
available ATM. Implemented correctly for x86 only.
* Changed the semantics of the debugger_module_info::debugger_getchar() hook.
It is supposed to return immediately now.
* Adjusted usb_keyboard accordingly. Hacked UHCI's debug_process_transfer() to
achieve that. It does now start, check, or cancel a transfer. Split
UHCI::ProcessDebugTransfer() into StartDebugTransfer(), and
CheckDebugTransfer() accordingly, and also added a CancelDebugTransfer().
The latter seems to have issues. Michael, please have a look. I have no clue
what I'm doing. :-)
* Adjusted kgetc() to poll all possible inputs using the new
functions/semantics. This allows to use any input (USB, PS/2, serial) in KDL.
* Removed the no longer needed "serial_input" command.
* read_line(): Also support 0x7f as backspace code. That's what xterm sends.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42126 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Reorganized the kernel locking related to threads and teams.
* We now discriminate correctly between process and thread signals. Signal
handlers have been moved to teams. Fixes#5679.
* Implemented real-time signal support, including signal queuing, SA_SIGINFO
support, sigqueue(), sigwaitinfo(), sigtimedwait(), waitid(), and the addition
of the real-time signal range. Closes#1935 and #2695.
* Gave SIGBUS a separate signal number. Fixes#6704.
* Implemented <time.h> clock and timer support, and fixed/completed alarm() and
[set]itimer(). Closes#5682.
* Implemented support for thread cancellation. Closes#5686.
* Moved send_signal() from <signal.h> to <OS.h>. Fixes#7554.
* Lots over smaller more or less related changes.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42116 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added an arch_debug_gdb_get_registers() interface that is supposed to provide
the register values in the format expected by gdb and implemented it for x86.
* Reimplemented gdb_regreply() to use that. Also made it buffer overflow safe.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41880 a95241bf-73f2-0310-859d-f6bbb57e9c96
menu item it's associated with rather than an input string. This allows it
to calculate the position to start the input at, as well as the correct
line to place it on. The previous solution always put the input at the
center line, which happened to be the right place by happy coincidence
unless one also had the menu items for viewing/saving the debug syslog
present.
* Implement input buffer scrolling, and consequently lift the previous size
limit on user input (it is now only limited by the size of the passed in
buffer).
* Implement parsing of the input buffer to allow it to handle comma-separated
options. Thus, one can now input things like "disable_smp true, serial_debug_output false"
and it will be handled properly.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41706 a95241bf-73f2-0310-859d-f6bbb57e9c96
aren't otherwise exposed via the safe mode menus. The option can be
found under the debug options menu, where additional settings can be
added one at a time with the same syntax used in kernel settings files
(i.e. disable_acpi on).
Scrolling of the input buffer is not yet supported (will implement that
soon), so currently the input is clamped to the size of one line. This
shouldn't be a problem for our current set of options though.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41577 a95241bf-73f2-0310-859d-f6bbb57e9c96
at the override entry to trigger the overriden vector so that we don't need
to configure any additional redirections.
* Also configures the polarity and trigger modes found in the override entry.
* When disabling the legacy PIC, retrieve the enabled interrupts and re-enable
then in the IO-APIC. This will for example make the ACPI SCI work that is
installed prior to switching interrupt models. Through the transparent support
for interrupt source overrides it'll also automatically relay from the old to
the new vector.
This should make ACPI interrupts work and should support relocating the ISA PIT
from irq 0 to a different global system interrupt (usually 2) so that it can
still work when IO-APICs are in use.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41528 a95241bf-73f2-0310-859d-f6bbb57e9c96
at all and, since there can be multiple IO-APICs, we need to do the
enumeration again in the kernel anyway. Also only set ioapic_phys the first
time we encounter an IO-APIC object as it looks cleaner when we arrive at the
first IO-APIC default address.
* Therefore we don't have to worry about already mapped IO-APICs when
enumerating them in the kernel.
* Also remove the mapping function that is now not used anymore.
* We still use the ioapic_phys field of the kernel args to determine whether
there is an IO-APIC at all to avoid needlessly doing the enumeration again.
This fixes multi IO-APIC configurations, because before we would indeed map
the last IO-APIC listed in the MADT, but then in the kernel assumed we mapped
the first one. We'd end up with mapping the last listed IO-APIC twice and the
first IO-APIC never, always programming the last one when we actually targetted
the first one.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41476 a95241bf-73f2-0310-859d-f6bbb57e9c96
mark the ISA interrupts as unusable and then use ioapic_is_interrupt_available
to determine if that vector is possibly taken by an IO-APIC. If IO-APICs are
not used, this will simply always return false, leaving all vectors free for
MSI use.
* The msi_init() now has to be done after a potential IO-APIC init, so it is now
done after ioapic_init() instead of inside apic_init().
* Add apic_disable_local_ints() to clear the local ints on the local APIC once
we are in APIC mode (i.e. the IO-APIC is set up and we don't need the external
routing anymore).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41445 a95241bf-73f2-0310-859d-f6bbb57e9c96
functional change intended.
* Use an appropriately sized sLevelTriggeredInterrupts for each controller type.
This also fixes an out of bound access for IO-APICs with more than 32 entries
and also returns the right mode in such cases.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41426 a95241bf-73f2-0310-859d-f6bbb57e9c96
* increase _SYS_NAMELEN defined in sys/utsname.h to 128 to allow long(ish) revisions
* sHaikuRevision is now a static character array (in both libroot and kernel)
* adjust build tool set_haiku_revision to write the revision as string
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41389 a95241bf-73f2-0310-859d-f6bbb57e9c96
a folder to some other place in the filesystem hierarchy
* add helper function to VFS that encapsulates the "conversion" of a
vnode-pointer to a fs_vnode-pointer (used by bindfs)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40238 a95241bf-73f2-0310-859d-f6bbb57e9c96
used by tarfs anyway) instead of RLE.
While this should allows larger logo/icons, it doesn't remove the
current 300000 bytes size limits for haiku_loader, so #6710 is not yet fixed.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40215 a95241bf-73f2-0310-859d-f6bbb57e9c96
* The team and thread kernel structures have been renamed to Team and Thread
respectively and moved into the new BKernel namespace.
* Several (kernel add-on) sources have been converted from C to C++ since
private kernel headers are included that are no longer C compatible.
Changes after merging:
* Fixed gcc 2 build (warnings mainly in the scary firewire bus manager).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40196 a95241bf-73f2-0310-859d-f6bbb57e9c96
that's the limit of the addr_t domain anyway.
* Defined IS_USER_ADDRESS() to !IS_KERNEL_ADDRESS(), which semantically it was
already, just more verbosely.
Should, in the future, avoid hundreds of useless Coverity tickets where the
macros are used.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40093 a95241bf-73f2-0310-859d-f6bbb57e9c96
the parameter (CID 5329).
* _MergeWithOnlyConsumer(): Removed the somewhat weird consumerLocked
parameter. The caller can unlock itself, if desired. Improves Unlock()
readability.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40084 a95241bf-73f2-0310-859d-f6bbb57e9c96
* inherit umask of calling process to images loaded via exec...()
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40071 a95241bf-73f2-0310-859d-f6bbb57e9c96
only a few events can be watched (team creation/deletion/exec, thread creation/
deletion/name changes). The functions start_system_watching()/
stop_system_watching start/stop watching events.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39862 a95241bf-73f2-0310-859d-f6bbb57e9c96
automatically cleaned up when the team is deleted: Class AssociatedData is
the base class for a data item, AssociatedDataOwner a container for them
(struct team derives from it). Functions team_associate_data() and
team_dissociate_data() add/remove data.
* Turned sTeamHash into a BOpenHashTable (necessary since struct team is no
longer a POD).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39860 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Implemented missing handling of symbolically linked images and of weak
symbols.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39646 a95241bf-73f2-0310-859d-f6bbb57e9c96
well. This is rather ugly, but it was the quickest way to provide O(1) element
removal. This class could really use some love.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39296 a95241bf-73f2-0310-859d-f6bbb57e9c96
- This is mostly a copy of the x86 32bit paging method and infrastructure, this was copied for two reasons:
1) It is the most complete VM arch
2) The first ARM PAE patches have landed on alkml, so we will have to deal with it in the future as well,
and this infrastructure has proven to be ready ;)
- No protection features, or dirty/accessed tracking yet
- Lots of #if 0
but....
It boots all the way up to init_modules() now, and then dies because of a lack of (ARM) ELF relocation implementation!
Since at this point the VM can be fully initialised, I'm going to focus on CPU exceptions next, so we can get KDL to trigger
when it happens, and I can actually debug from there ;)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39206 a95241bf-73f2-0310-859d-f6bbb57e9c96
userland single-stepping is enabled for the thread.
* x86_exit_user_debug_at_kernel_entry(): Always store DR6 and DR7 in the CPU
structure, not only when breakpoints are installed.
* x86_handle_debug_exception(): When encountering a syscall single-step, also
set the THREAD_FLAGS_DEBUG_THREAD thread flag. Otherwise the
B_THREAD_DEBUG_STOP would be ignored.
* x86 interrupt handling, DISABLE_BREAKPOINTS():
- Renamed to STOP_USER_DEBUGGING().
- Now it also call x86_exit_user_debug_at_kernel_entry() when
THREAD_FLAGS_SINGLE_STEP is set, so that the debug registers are saved.
Fixes#6751.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39201 a95241bf-73f2-0310-859d-f6bbb57e9c96
possible mismatch images info between loader and kernel.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38947 a95241bf-73f2-0310-859d-f6bbb57e9c96
quite hidden bug theme.
This also reduce its RLE compression size, which should fix#6710.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38946 a95241bf-73f2-0310-859d-f6bbb57e9c96
The official release one stay the well-known one, just renamed to show it's trademarked images.
Fixed#6183.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38891 a95241bf-73f2-0310-859d-f6bbb57e9c96
This might help with ACPI shutdown issues, if not this change can be reverted. Not verified as it works on all my machines even without this.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38585 a95241bf-73f2-0310-859d-f6bbb57e9c96
Add support for both discovery and regular iSCSI sessions. Command and status
sequence numbers do differentiate between session and connection but only
one connection per session is currently supported.
Code is Big Endian for now, so compile it for ppc only.
Based on RFC 3720 ff. Tested against OpenSolaris 2009.06.
Resolves most of ticket #5319.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38536 a95241bf-73f2-0310-859d-f6bbb57e9c96
Pass the desired window size from the socket to the service.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38530 a95241bf-73f2-0310-859d-f6bbb57e9c96
Modelled after UDP, add limited TCP support to the boot net stack. The socket
works by queuing received packets as well as sent packets that have not yet
been ACK'ed. Some known issues are documented, especially there's only limited
congestion control. I.e., we send immediately and in unlimited quantity, thus
its use should be restricted to local networks, and due to a fixed window size
there is potential for our socket being overrun with data packets before they
are read. Some corner cases like wrapping sequence numbers may cause a timeout.
The TCP implementation is based on Andrew S. Tanenbaum's "Computer Networks",
4th ed., as well as lecture notes from Prof. W. Effelsberg, the relevant RFCs
and Wikipedia. The pseudo-random number Galois LFSR used for the sequence
number was suggested by Endre Varga.
Since the code is unlikely to get much smaller, better merge it now so that
subsequent changes get easier to review. No platform actively uses TCP sockets
yet, and the receiving code has been reviewed for endianness issues and should
terminate okay after verifying the checksum if no sockets are open.
Based on a version tested with custom code (#5240) as well as with iSCSI.
Compile-tested boot_loader_openfirmware, pxehaiku-loader with gcc4 and
haiku_loader with gcc2. Closes ticket #5240.
Changes from #5240 proposed patch:
* Various bug fixes related to queuing, some memory leaks fixed.
* Never bump the sequence number when dequeuing a packet. It's done afterwards.
* Don't bump the sequence number again when resending the queue or ACK'ing.
* Aggressively ACK while waiting for packets.
* Don't queue sent ACK-only packets.
* More trace output, esp. for queue inspection.
* Adapted use of TCP header flags to r38434.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38472 a95241bf-73f2-0310-859d-f6bbb57e9c96
Fix style issue, pointed out by Axel.
No functional changes.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38456 a95241bf-73f2-0310-859d-f6bbb57e9c96
Add protocol number and struct for TCP header.
First minuscule part of ticket #5240.
Checked that pxehaiku_loader still compiles, too.
Changes from proposed patch:
* Simplify struct by merging flags into one 8-bit field.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38434 a95241bf-73f2-0310-859d-f6bbb57e9c96
* _kern_[sg]et_timezone() now accepts/passes out the timezone name, too
* adjust Time preflet and clockconfig to pass the timezone name into the kernel
when calling _kern_set_timezone()
* ajust implementation of tzset() to fetch the timezone name from the kernel
via _kern_get_timezone() instead of reading 'libroot_timezone_info'
* the Time preflet no longer writes 'libroot_timezone_info'
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38164 a95241bf-73f2-0310-859d-f6bbb57e9c96
* made FAT add-on use get_timezone_offset(), this time correctly adjusted for
the difference in units (minutes/seconds)
This makes the times in our FAT-fs agree with Linux again, at least :-)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37905 a95241bf-73f2-0310-859d-f6bbb57e9c96
* dropped DaylightSavingTime from real_time_clock code in kernel, it was
never really being used for what it meant (and just being referred to by
gettimeofday(), which put a different meaning to it
* adjusted the syscalls get_timezone() & set_timezone() as well as their callers
accordingly
* got rid of get_rtc_info() and rtc_info struct in kernel, as it was only
being referred to by the FAT add-on and that one (like gettimeofday()) put a
different meaning to tz_minuteswest. Added a comment to FAT's util.c
showing a possible solution, should the hardcoded GMT timezone pose a problem.
* fixed declaration of gettimeofday() to match POSIX base specs, issue 7
* changed implementation of gettimeofday() to not bother trying to fill struct
timezone - it was using wrong values before, anyway.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37888 a95241bf-73f2-0310-859d-f6bbb57e9c96
* renamed syscalls _kern_[gs]et_tzfilename
to _kern_[gs]et_real_time_clock_is_gmt, as the filename part is no longer
relevant (and the two corresponding parameters were removed)
* C++-ified and reworked clockconfig to use the info from 'Time settings'
to setup the timezone info during boot
* removed invocation of _kern_get_tzfilename() from tzset(), as the syscall
no longer exists and tzset() is currently broken anyway
* adjusted the Time preflet to use the renamed syscall when getting/setting
the RTC info
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37881 a95241bf-73f2-0310-859d-f6bbb57e9c96
video_splash.cpp and boot_splash.cpp will be updated to utilize it.
Relates to #6183. See #6255 for issues on using 'splash_logo-development.png'
with generate_boot_screen.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37739 a95241bf-73f2-0310-859d-f6bbb57e9c96
See http://clang.llvm.org/compatibility.html#c++ why it is needed. Note that HashMap.h Key and Value are typenames as well.
Afaict this is correctly done, builds and runs on gcc4. This fixes#5892.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37550 a95241bf-73f2-0310-859d-f6bbb57e9c96
vm_page::Init().
* Made vm_page::wired_count private and added accessor methods.
* Added VMCache::fWiredPagesCount (the number of wired pages the cache
contains) and accessor methods.
* Made more use of vm_page::IsMapped().
* vm_copy_on_write_area(): Added vm_page_reservation* parameter that can be
used to request a special handling for wired pages. If given the wired pages
are replaced by copies and the original pages are moved to the upper cache.
* vm_copy_area():
- We don't need to do any wired ranges handling, if the source area is a
B_SHARED_AREA, since we don't touch the area's mappings in this case.
- We no longer wait for wired ranges of the concerned areas to disappear.
Instead we use the new vm_copy_on_write_area() feature and just let it
copy the wired pages. This fixes#6288, an issue introduced with the use
of user mutexes in libroot: When executing multiple concurrent fork()s all
but the first one would wait on the fork mutex, which (being a user mutex)
would wire a page that the vm_copy_area() of the first fork() would wait
for.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37460 a95241bf-73f2-0310-859d-f6bbb57e9c96
Suggested by Ingo in ticket #6139. Code is adapted from x86.
Note that on ppc64 GPR1 needs to be 64-bit, thus the choice of addr_t.
Resolves part of ticket #6160.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37281 a95241bf-73f2-0310-859d-f6bbb57e9c96
In r33670 the svn:eol-style property was dropped, which took care of
locally converting the line endings to the user's native style.
While most files use Unix-style LF line endings, some files have
Windows-style CR LF line endings.
Assure that the following r37262 directories use Unix-style line endings:
src/system/boot/
src/system/boot/arch/
src/system/boot/arch/ppc/
src/system/boot/loader/
src/system/boot/loader/net/
src/system/boot/platform/
src/system/boot/platform/openfirmware/
src/system/boot/platform/openfirmware/arch/
src/system/boot/platform/openfirmware/arch/ppc/
src/system/kernel/
src/system/kernel/arch/
src/system/kernel/arch/ppc/
src/system/kernel/platform/
src/system/kernel/platform/openfirmware/
headers/private/kernel/
headers/private/kernel/arch/
headers/private/kernel/arch/ppc/
headers/private/kernel/platform/
headers/private/kernel/platform/openfirmware/
headers/private/kernel/boot/
headers/private/kernel/boot/net/
headers/private/kernel/boot/platform/
headers/private/kernel/boot/platform/openfirmware/
This avoids patches containing irrelevant lines unintentionally converted.
No functional changes.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37265 a95241bf-73f2-0310-859d-f6bbb57e9c96
headers and respectively added includes in source files.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37259 a95241bf-73f2-0310-859d-f6bbb57e9c96
ClearAccessedAndModified() implementations into helper methods PageUnmapped()
and UnaccessedPageUnmapped() in the base class.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37187 a95241bf-73f2-0310-859d-f6bbb57e9c96
vm_available_not_needed_memory() version that can be called from within the
kernel debugger.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37167 a95241bf-73f2-0310-859d-f6bbb57e9c96
kernel private.
* Moved dumping code from dump_cache() to new VMCache::Dump().
* Override VMCache::Dump() in VMVnodeCache to also print the vnode.
* Removed no longer needed VMCache::GetLock().
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37138 a95241bf-73f2-0310-859d-f6bbb57e9c96
restrictions for virtual/physical addresses.
* vm_page_allocate_page_run():
- Fixed conversion of base/limit to array indexes. sPhysicalPageOffset was not
taken into account.
- Takes a physical_address_restrictions instead of base/limit and also
supports alignment and boundary restrictions, now.
* map_backing_store(), VM[User,Kernel]AddressSpace::InsertArea()/
ReserveAddressRange() take a virtual_address_restrictions parameter, now. They
also support an alignment independent from the range size.
* create_area_etc(), vm_create_anonymous_area(): Take
{virtual,physical}_address_restrictions parameters, now.
* Removed no longer needed B_PHYSICAL_BASE_ADDRESS.
* DMAResources:
- Fixed potential overflows of uint32 when initializing from device node
attributes.
- Fixed bounce buffer creation TODOs: By using create_area_etc() with the
new restrictions parameters we can directly support physical high address,
boundary, and alignment.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37131 a95241bf-73f2-0310-859d-f6bbb57e9c96
Kernel doesn't use it, and it could be regenerated in the kernel if it did need it.
This also unlocks the apic range the bios can use. Previously the apic ids would have
to fit within 0..MAX_CPUS or it'd reject the cpu. Some boxes (mine in particular)
seem to sparsely populate the apic id so that the range is pretty large.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37108 a95241bf-73f2-0310-859d-f6bbb57e9c96
was used.
* Renamed X86VMTranslationMap to X86VMTranslationMap32Bit and pulled the paging
method agnostic part into new base class X86VMTranslationMap.
* Moved X86PagingStructures into its own header/source pair.
* Moved pgdir_virt from X86PagingStructures to X86PagingStructures32Bit where
it is actually used.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37055 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Renamed i386_context_switch() to x86_context_switch().
* x86_context_switch() no longer sets the page directory.
arch_thread_context_switch() does that explicitly, now. This allows to solve
the TODO by reordering releasing the previous paging structures reference and
setting the new page directory.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37024 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Renamed vm_translation_map_arch_info to X86PagingStructures, and all
members and local variables of that type accordingly.
* arch_thread_context_switch(): Added TODO: The still active paging structures
can indeed be deleted before we stop using them.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37022 a95241bf-73f2-0310-859d-f6bbb57e9c96
