Use the User Read-only Thread ID Register aka TPIDRURO to store
TLS pointer.
The User Read-only Thread ID Register is read-only in User mode,
and read/write in privileged modes.
see: ARMv7 Architecture Reference Manual,
section B3.12.46 CP15 c13 Software Thread ID registers
Change-Id: I7bff2fd66f41d7bf1a8a247151bcd02b32733c1b
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4994
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
Reviewed-by: Fredrik Holmqvist <fredrik.holmqvist@gmail.com>
init_hardware now takes 2 devices arrays: one for PCI and one for USB
drivers, respectively.
The few drivers that have their own __haiku_handle_fbsd_drivers_list
are also adjusted at the same time.
It is not yet wired in to the rest of the compatibilit layer;
that will happen in the next commits.
The bulk of the implementation is in usb.cpp; most of the
rest of the new files are copied from FreeBSD to varying degrees.
Otherwise we have a race (or worse): in the case where the transfer
has completed or is in the process of completion between CancelQueued
and here, the callback can still be invoked after we returned and
cause corruption.
Discovered while working on USB support in the FreeBSD compatibility
layer: a lock inversion problem meant these timeouts always occurred
but then the callback would be invoked later and corrupt stack.
With this change, such problems will instead cause deadlocks.
That's not an ideal situation to be in, but we should detect
such problems elsewhere and make them into asserts; deadlocks
are assuredly better than random memory corruption.
Previously they would just get "lost" and never signal completion.
(Considering how rare fragmented transfers are, this may not fix
any real problems.)
* Fixes functionality of TRACE statements on 64-bit platforms.
Change-Id: Iaba8f8b2d49ec1acda3fc2d51e24a207c5bcc97a
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4992
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
Reviewed-by: Fredrik Holmqvist <fredrik.holmqvist@gmail.com>
* Resolves an issue compiling icu70
* FreeBSD is 262,144
* Linux is 2,097,152
* Haiku was 131,072
This roughly doubles the maximum args length, and makes us
function inline with FreeBSD today. If we're the shortest
straw, we're going to find a lot of things broken (such
as ICU 70.1) Matching FreeBSD means any limitations we see
will also be seen on FreeBSD, making fewer "Haiku issues".
Change-Id: I677c0523a2f27c9e9901fda4180445bcb6da31b2
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4991
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
Update as per Unicode 14 (and draft 15)
Include the noncharacters. We don't really want the .notdef glyph for
them, except for U+FDD1 which we have reserved internally to force it
from webkit.
Fixes#17593
Change-Id: I5a62bf0e7753adacc81ea19b3351deb58d5c0653
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4984
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
to find the RSDP, also try to find it in the EBDA area.
Fix trace build.
Change-Id: I94c3fbec9ea97b9187bf6b2c634298f6ae5b413c
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4981
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
These can be used on platforms that only support memory spaces
and have no other general restrictions. riscv is one such for now,
so this finally commits support for RISC-V in the FreeBSD compat layer.
Now copied directly from FreeBSD.
Also change copyright info of the main file, as the remaining parts have
almost entirely been written by me at this point.
It seems FreeBSD does the same (and drivers used to do this individually
but have not for some time.)
May help with quite a number of initialization-failed WiFi/ethernet tickets.
* Use the standard TRACE{|_ALWAYS|_ERROR} setup.
* Put DBG(OUT... code as TRACE.
Makes syslog output from this module significantly less verbose
in default builds.
In the case the team has already been removed from its process group,
this means we are far enough into teardown that we cannot change it.
Simply check for NULL and then return an error if so.
Fixes#17448.
* Mostly just to be consistent with everything else
Change-Id: I468ce0a20fb918ec6e696bbc9e961dbc4386d7ff
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4963
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
* The private keys are in possession of Haiku, Inc.
Change-Id: I3b5b004e1dce0102f8a65f6d682f7e428845efe8
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4936
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
hrev17117 implemented B_OP_COPY with a special treatment for text.
hrev21929 introduced the color cache to speed up that text drawing.
hrev52753 removed the special treatment of text in B_OP_COPY, but left the
color cache and the text flag behind.
Change-Id: Ib506c80a660e829132bce3ec1cb354fcfbab266c
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4931
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
SetDrawState sets the pattern directly and then calls the member
functions to update colors. As SetHighColor does not update the renderers
if color does not change, that means we lose sync in some corner cases.
Change-Id: I5f8771baa58643c559df243dcc1603983941faee
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4930
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
The body text on the About tabs for the JPEG & JPEG2000 translators are
BTextViews and so the default fg color is B_DOCUMENT_TEXT_COLOR. This
patch forces them to use B_PANEL_TEXT_COLOR to match the rest of the panel.
As a side note, trying to set the fg color in every translator via
SetHighUIColor seems to have no effect and they seem to all default to
using B_PANEL_TEXT_COLOR already (aside from the BTextViews in this
commit).
Fixes#15941
Change-Id: Ia97dcce082d7f1666c61a8d5ecefa3bcd5845b96
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4960
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
