This means the build tools will no longer be built against the host
platform's libbe, which avoids compatibility problems -- e.g. an
older Haiku host libbe may not have certain features the build tools
require -- and also makes the build behave more similiar on Haiku and
other platforms. The host libroot dependency still remains and is not
easy to get rid of.
Also remove some bits of BeOS/Dano/Zeta build support.
* Update MimeSet rule to use the MIME DB the build system creates.
* Add CreateAppMimeDBEntries rule and call it from Link for targets that
might be applications that need to be registered with the MIME DB. For
the target the rule is invoked with it creates a directory into which
the entries for the types to be registered are written. The directory
is associated with the target via the HAIKU_MIME_DB_ENTRIES variable.
* AddFilesToContainer: If a target is added that has MIME DB entries,
also add those to the container.
* build_haiku_package: Call mimeset for the package contents.
Since the same driver can be added in more than one category, in a few
cases AddDriversToContainer was invoked twice for the same target. Avoid
adding the driver twice to add-ons/kernel/drivers/bin in such a case.
Didn't really cause any problem, but no need to copy the file twice.
* build_haiku_image: Remove MIME DB creation code.
* Rename beos_mime source directory to mime_db.
* Add rules to build the MIME DB in the source directory's jamfile.
* Add MIME DB directory to haiku.hpkg in data/mime_db.
Instead of the boolean alwaysUpdate, isCDPackage, and stripDebugSymbols
parameters use a uniform flags parameter which can contain any of the
respectively supported flags (alwaysUpdate, cdPackage,
stripDebugSymbols, !stripDebugSymbols).
* Add optional packages Zlib and Zlib-devel.
* Simplify the build feature section for zlib and also extract the
source package.
* Replace all remaining references to the zlib instance in the tree and
remove it.
* Introduce the notion of build feature attributes and add rules
SetBuildFeatureAttribute and BuildFeatureAttribute to set respectively
get a build feature attribute.
* Add rule ExtractBuildFeatureArchives to download and extract archives
and set build feature attributes to extracted entries.
* Add rule UseBuildFeatureHeaders as a shorthand for getting a build
feature attribute and adding it as a system header search directory.
We extract both packages to the same directory now, since the icu_devel
package depends on the base package and contains relative symlinks to
the libraries. ATM that isn't really relevant, since we link directly
against the libraries from the base package, but we might want to
change that eventually.
When invoked for a hpkg only the installation location (i.e. "common"
or "system") has to be specified now and "common" is the default. The
rule uses AddPackageFilesToHaikuImage now.
It points to the settings directory appropriate for global settings.
When a package is installed in ~/config, we cannot use the settings/
subdirectory for global settings, since then the files could clash with
equally named user specific settings files (e.g. in case of
ssh/known_hosts). So we use ~/config/settings/global for global
settings instead.
Apparently it isn't ready yet. I haven't found a single syslog on Trac
that shows a successful initialization of the driver, and on my
machine, where it does that at least, the system freezes during boot.
Also include the freebsd_network and freebsd_wlan headers. Their final
location and which of them to include in the first place might need some
adjustments.
Equivalent to "jam <list of all hpkgs> && jam @... <list of all hpkgs>",
i.e. it makes sure all hpkgs that are supposed to be in the image are
rebuilt respectively downloaded and copied to the image. It doesn't
remove old packages nor the activation files -- that still has to be
done manually.
* ... to avoid confusion with the preRelease property. It's also called
"revision" in the HaikuPorts recipes.
* Update libsolv package. Was necessary due to the BPackageVersion
change, but also includes a few more changes.
* libsupc++ wasn't required, the build failed on x86_64.
* PPL: --disable-maintainer-mode configure option seems not enough to avoid an autoconf launch.
Solved by redefined AUTOCONF AUTOHEADER ACLOCAL AUTOMAKE variables to the noop command "true".
* PPL: make could run autoconf in certain conditions, thus generating artefacts
in the source tree. Added --disable-maintainer-mode when launching
configure to avoid this situation.
* cleanup: there are no info files in CLooG and PPL.
* Reorganize things a bit:
- BSolver is now an abstract base class.
- A libsolv based implementation, LibsolvSolver, lives in a new
add-on, which is loaded lazily.
- Get rid of libpackage_solver. Save for LibsolvSolver everything
is moved to libpackage.
- This is a nicer solution for the cyclic dependency caused by
libsolv (libsolvext to be precise) using the package kit for
reading repositories and package files.
* Add a solver result data structure and and an accessor the solver.
* Add problem reporting support to the solver. There aren't data
structures for the problem solutions yet and support for selecting
solutions and re-solving is missing as well.
* The call to the dummy actions isn't needed
* The calls to Extract{Zip,Tar,HPKG}Archive1 couldn't work like that.
The directory has to be the main target, since ExtractArchive is
potentially invoked multiple times with different extracted file
targets and the Extract*Archive1 is only invoked the first time.
Tested only with the HPKG actions, but they others should work as
well.
* Updated to version 2.0 of vendor code.
* Reliability improvements in controlling the underlying devices.
* Implement leaving networks.
* Better timeout handling.
* Usability enhancements like cancel on escape, ok button being the
default and the password field having focus on start.
* Storing of the password using BKeyStore.
It is now declared with architecture x86_gcc2, though it probably
has been built with gcc4. That issue has to be solved for real
eventually, since the package resolver won't allow mixing of gcc2
and gcc4 packages.
It's sufficient to simply check if the gcc version is 4 or higher since
we enforce the use of the latest ported compiler for the build anyways,
and these multi-level checks would fail in their current state if gcc
moved to e.g. version 5.0.
Added the optional package for system sounds that
were collected for GCI 2012. Also added the demo
packges to the "contents" at the top of OptionalPackages.
* Tried to use EFI::Header class, but there doesn't seem to be an easy
way to actually hit the disk -- which we'll have to do to find out
how large the GPT table is.
* Initialization of GPT disks is now working which is why I added the disk
system add-on to the image. However, there is a caveat, as the backup
header and table aren't written yet.
* Partitions can be deleted.
* Creating partitions does not work yet, but I don't know yet why; in
theory it could already work.
..and Haiku64Image. While I'm at it split the commands so each letter
in the alphabet gets it's own line(s). This will make these kinds of
changes more atomic in the future.
* Version of Vim package for x86_64 added;
* Version of KeymapSwitcher package for x86_64 added;
* KeymapSwitcher package fixed to preserve Cmd <-> Ctrl swap settings on
keymaps switch. Fixes#9142;
* UnRAR updated from 3.7.8 to 4.2.4, fixed for multibyte characters
support and build for x86_64. Partially fixes#4879;
If no hrev tags are found the revision is blank and shows up as
0 in About System. This commit updates the revision function so that
it falls back to the current short hash instead. Only affects devel
builds and only if you've deleted your tags.
* Try to keep each renderer designed
the same.
* swrast will build... swpipe won't
build until we have an llvm build
package. (should in a few days once
llvm 3.2 is released)
* libmesa and libgallium no longer live in libGL
* opengl kit gets libglapi for dispatch
* swrast will get libmesa
* swpipe will get libmesagallium + gallium drivers + llvm
Work I did at Begeistert, trying to use the new driver manager and
detecting display controls. It should probably be a good example of
how a new driver is built. It currently loads and detects
display controls correctly but doesn't do any actual work yet.
Not sure when I have the time to finish the driver, it shouldn't be
that hard but I currently have have other priorities. Feel free to
work on it in the meantime.
Got rid of X86_ONLY and friends in HaikuImage, FloppyBootImage, etc.
Instead we use build feature specification annotated lists with
FFilterByBuildFeatures (either explicitly or implicitly where passing
the list directly to the image rules).
I just translated the variables to the respective annotatation in most
cases, though in some cases different annotation would be more correct
(e.g. for the OpenGL stuff).
Provides a simple framework for addressing #3798. The interested reader
may add the build features and add/adjust the annotations accordingly.
An archive (ramfs) to be loaded can be specified in the raspberry pi
config.txt with a certain base address. We can use this to put our
floppy boot archive into memory on startup.
During the start procedure we now map that archive so we can later
load the kernel from it.
* As of Mesa3D 9.0+, GLU is a seperate project
* Our in-tree GLUT builds with GLU-9.0 without
modification.
* We ignore the GLU libraries that Mesa-7.8.2 and
Mesa-8.1-devel provide and use the glu-9.0 ones
* This is kind of a limbo state, but works for now.
* Eventually we will be on Mesa 9.0 (which requires
the external GLU) and Mesa 7.8.2 (which works with
the newer external GLU) and will rip GLU out of the
7.8.2 OptionalBuildPackage.
* I don't *think* we are using the Mesa GLU headers...
we will know for sure when I pull'em out of the
OptionalBuildPackages :D
Currently hardcoded to Verdex target. Code prepared to pick up configuration
details from FDT when implemented. Only enabled in FloppyImage for ARM.
This actually enables the kernel to read the content of the image file
passed using the "-pflash" parameter to QEMU....
* Fixed issue with unwanted keymap switching in case UnZip started in
* background (expanding optional packages during Haiku build, for
* example). UnZip executable has no background application flag
* for unknown reason.
+alpha4
Introduce HAIKU_DOWNLOAD_CACHE variable that can point to a directory.
containing optional packages to check first before downloading.
Missing packages are also added to the cache.
This allows sharing and reusing them to make builds without a connection.
* Puri wouldn't work after the update to libpng 1.5
* It was still looking for libpng.so.1.4
* Not intended for r1alpha4 branch, as it's still on libpng 1.4
* These were updated again due to recent changes to the buildtools
* Packages are based on btrev43045, whereas the previous set was based on btrev43040
+alpha 4 (GCC2 package needed to match recent date versioning change to configure script)
* This package is current as of btrev43040
* Primarily did this rebuild to assure the GCC4 package was made with the latest buildtool sources
* This invalidates the need to cherry pick hrev44704 for R1A4
+alpha4
* This package is smaller in size than the previous due to the fix in btrev43038
* This package addresses issue building code with SSP due to fix in btrev43039
* This commit along with btrev43039 fixes#8931
+alpha4 (and hopefully last update to GCC before R1A4 release)
Setting 'HAIKU_STRIP_DEBUG_FROM_OPTIONAL_PACKAGES = 1' will enable the
mechanism. By default all packages will be stripped. Passing anything
other than '1' or 'true' in the InstallOptionalHaikuImagePackage call
will disable it for a particular package.
* added optional feature package for libpng 1.5.12 gcc4/gcc2 x86 and ppc
* drop libpng sources and headers from the tree.
* added optional feature package for jpeg 8d gcc4/gcc2 x86 and ppc
* drop jpeg sources and headers from the tree.
The original package was cross-compiled to Haiku, turns out flex's
build system uses paths to stuff from the host system, so the package
was broken. Rebuilt from Haiku.
Added autoconf, automake, libtool, texinfo, perl, gettext and nano.
Building an image with the nightly targets should give you an image
with these included.
This adds some of the development packages for x86_64. All of the
DevelopmentBase packages (gcc, make, jam, bison, flex, m4, mkdepend)
have been built and uploaded.
* made private Catalog.h header public by moving it to
os/locale/tools/CollectingCatalog.h
* reintroduce B_COLLECTING_CATKEYS define (which is expected to be set
during a collectcatkeys session) in order to decide whether or not
to automatically include the CollecingCatalog.h header from Catalog.h
* adjust jam rule for collecting catalog keys accordingly
Turns out that libgcc is needed, for some reason building the kernel
with -O0 does not end up referencing libgcc but -O2 does. A separate
build of it is done with -mno-red-zone, same reason as for libsupc++.
Ended up being easy to rebuild with different CFLAGS: previously I'd
tried doing `CFLAGS="-mno-red-zone" make` in the libgcc dir which
didn't override, the correct way is `make CFLAGS="-mno-red-zone"`
Kernel mode code on x86_64 needs to be built with -mno-red-zone as
interrupts would corrupt the red zone if it were in use. However, the
kernel is linked with libsupc++, which was not compiled with
-mno-red-zone. If an interrupt occurred in libsupc++ code the red zone
would get corrupted. This was causing random panics, particularly under
heavy system load. Therefore, on x86_64 a separate build of libsupc++
with -mno-red-zone is now done for the kernel to use. Note: this commit
will require a rerun of configure and rebuild of cross tools.
This reverts commit 14b654326d.
Unfortunately that changeset causes a regression on GCC 2, which
makes playback of (some?) video impossible. This is due to Libavcodec
being miscompiled, which requires gcc >= 4.2
Resolves the regression of #8856, but does not fix the root issue.
* Various compilation fixes.
* Fixes to the FreeBSD compatibility layer (from comparing the x86-
specific bits with the equivalent amd64 sources in FreeBSD).
* Compile all the Ethernet drivers except for sis900 and wb840, these
require a bit more work to fix (will file a ticket soon). Tested
ipro1000 and rtl81xx, no issues.
Some preference apps, mount_server and AboutSystem. Removed the check
for x86_64 in the boot script, the normal path through the script will
work now. Also removed a temporary hack to workaround AboutSystem not
being there in build_haiku_image.
As mentioned in one of the previous commits, breakpoints don't work
properly yet, and I haven't done much extensive testing yet, but the
basic functionality works.
With this commit, app_server now compiles and runs at boot! Nothing
particularly interesting happens, just the blue background and a mouse
pointer. Remote backends are broken and not compiled in, see #8834.
Note that it won't be possible to build this quite yet, need to get
the FreeType package uploaded.
This module provides an interface for drivers to use to perform calls
to the BIOS (only really for use by graphics drivers which need to use
the VESA BIOS). It uses the x86emu library from X.org which emulates
a real mode x86 CPU. This is necessary for x86_64 as virtual 8086 mode
no longer exists there.
* This puts the registers in a better state and ensures
all model dependant defines are prefixed with card series
* Consolidate evergreen defines into single header
The boot script now launches consoled instead if app_server does not
exist, so there is now an interactive Bash prompt! libbe requires ICU,
which is an optional package, so I've built the packages and they've
been uploaded to haiku-files.org (thanks umccullough).
GCC 2 built for OS X 10.7/10.8 was broken, the Haiku build would fail
with some strange errors. Forcing compilation of GCC 2 in 32-bit mode
results in a working GCC.
* Added x86_64 linker script and relocation code.
* Some 64-bit safety fixes to the heap code.
* Added runtime_loader, libroot and bash to the x86_64 image. The boot
script will be launched, but will panic shortly after because fork
is broken.
Added a temporary Haiku64Image file that gets included instead of
HaikuImage when building for x86_64, which I will add to as I port
stuff. Images currently only include the boot loader, kernel and
a bunch of add-ons.
This adds disk drivers, intel/session partitioning systems, and ISO9660
(+ write/attribute_overlay) modules to the CD/floppy boot image targets
for x86_64. The kernel now detects and mounts the boot CD, and runs up
to attempting to start the boot script.
Uses the x86 architecture code, made fixes to printf formats and a
couple of 64-bit fixes. Only potentially intrusive change is that I've
changed PCI.h to use uint32 rather than ulong. I don't see any way
this would cause any issues, though.
- The cdrecord port was using the wrong path for searching for SCSI
devices. This led to it failing to find SATA CD drives. Updated
package by Chris Roberts.
Added the necessary build flags for modules, and added a module (dpc)
to the floppy image for x86_64 builds for testing purposes. The module
gets loaded correctly and its code runs without issue. Only non-trivial
addition is the different method for generating kernel.so, this is
explained in the kernel Jamfile.
