_kern_ktrace_output() syscall, since it will be stored in a separate
entry anyway.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23807 a95241bf-73f2-0310-859d-f6bbb57e9c96
for reading my commit and noticing! :-)
Using the test application I could have found that bug; that codepath is
currently not used in Haiku.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23801 a95241bf-73f2-0310-859d-f6bbb57e9c96
confirmation after sending off the startup IPIs. We simply moved on and setup
the temporary stack address for the next CPU to be started. With this it was
possible that the trampoline code did not manage to load the address before
we overwrote it. So for configurations with more than two CPUs it was possible
that two CPUs were setup to the same kernel stack which could have caused all
sorts of things - most likely a tripple fault and a reboot. On real hardware
this seems very unlikely but it was easily reproducible with QEMU and -smp >2.
We now use the shared trampoline stack to implement a notification mechanism.
The trampoline code will clear the stack location variable once it has loaded
everything it needs from the trampoline stack. On the other side
smp_boot_other_cpus() will wait for this variable to be cleared after it sent
the startup IPIs so that it knows when it can safely move on and overwrite the
area to boot the next CPU.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23800 a95241bf-73f2-0310-859d-f6bbb57e9c96
the GTT is not part of the stolen memory. However, the BIOS popup seems
to be - removing that page solves the flickering overlay when its buffer
contained it.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23799 a95241bf-73f2-0310-859d-f6bbb57e9c96
we now always only use the primary ring buffer.
* Removed secondary ring buffer allocation and member fields.
* Increased size of the primary ring buffer to 65536 bytes.
* The bytes per row register is computed differently for 9xx chips.
* On G33, the overlay does not need a physical address anymore, so we
don't pass B_APERTURE_NEED_PHYSICAL to the allocation anymore for that
device.
* intel_free_memory() accidently added the aperture base to the allocation
and would therefore never free any memory.
* INTEL_RING_BUFFER_SIZE_MASK was shifted one bit to the right, didn't
cause any harm with our buffer sizes, yet, though.
* With these changes, the driver runs stable on a G33 chipset (I have not
yet tested the hardware cursor, though, it might need some work, too).
The only known issue left is that overlay flickers a bit if its buffer
is partially backed up by reserved and allocated memory.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23798 a95241bf-73f2-0310-859d-f6bbb57e9c96
memory (so no memory was ever bound in that case).
* Disabled debug output in the Intel GART module.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23797 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Removed "physical" parameter of GART's bind_aperture() - I don't think this
be of use to anyone.
* Fixed binding/unbinding pages in the Intel GART driver; I accidently shifted
the page offset twice.
* Actually forgot handling of allocated memory in Aperture::BindMemory().
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23796 a95241bf-73f2-0310-859d-f6bbb57e9c96
* The kernel now opens up to 8 debugger modules (and puts them into an array;
maybe we'll want to switch to a doubly linked list when there is the need).
* Implemented an example debugger module that prints a stack trace of the
current thread when the kernel debugger is entered (not included in the
image).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23794 a95241bf-73f2-0310-859d-f6bbb57e9c96
compiling a regex. Note this is probably a bug in how MDR uses regex and not in
the regex implementation itself. This is just the simple fix while I
investigate bug #1200.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23792 a95241bf-73f2-0310-859d-f6bbb57e9c96
these key combinations (ALT + +/-) can't be used on many keymaps, we
might want to change. Moved view resizing to a private window method.
Seems to work, more or less (ticket #1334)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23791 a95241bf-73f2-0310-859d-f6bbb57e9c96
selection (for example, moving around text with the mouse).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23789 a95241bf-73f2-0310-859d-f6bbb57e9c96
that. This fixes bug #1475.
* Now accepts file arguments (will pick a random one out of them) as fortune
sources.
* Minor cleanup and simplifications.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23788 a95241bf-73f2-0310-859d-f6bbb57e9c96
taken as-is from a previous launch time, as number of CPUs could have changed since last boot.
Size is now enforced and height is always dynamically computed.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23785 a95241bf-73f2-0310-859d-f6bbb57e9c96
instead of rl_delete for the delete key. That was one reason for bug #1495.
* The other one was that an inputrc file at /etc was ignored, the bash would
only check for ~/.inputrc. If changed that now such that if ~/.inputrc could
not be read, /etc/inputrc is tried.
* Both of these changes close#1495.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23783 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Since it didn't check if any mouse button was pressed at the time it was
called, it would still initiate a drag, and thus caused bug #1710.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23782 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Now uses the AGP GART module for memory management. This greatly simplifies
the memory handling, and memory is now actually allocated on demand,
instead of a fixed size (stolen memory is not freed, though).
* The Intel GART module should now also work with older chipsets.
* No longer remove the GTT size from the stolen memory; this appears to have
been a mistake in the X driver. Not sure about the BIOS popup yet.
* The AGP module (in combination with the Intel GART module) is now mandatory
to use the Intel driver.
* Removed now superfluous settings (like memory size). Only enabling/disabling
the hardware cursor is still supported.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23781 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Debug output now defaults to on (much more useful for debugging...)
* The receiver now stops when it got 0 bytes (signals peer is closing the
connection).
* The random reorder stuff did not work correctly.
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23775 a95241bf-73f2-0310-859d-f6bbb57e9c96
also used in BindMemory() and UnbindMemory() - before the latter two were
just not working correctly for memory in the reserved region.
* The Aperture destructor now also frees (and unbinds) all still existing
allocations.
* Aperture::fFirstMemory was not initialized.
* Added some more debug output.
* BindMemory()'s vertical to physical address translation didn't work correctly.
* alignment must be at least B_PAGE_SIZE in _Insert().
* bind_aperture() needs to pass the B_APERTURE_NON_RESERVED flag to
CreateMemory().
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23774 a95241bf-73f2-0310-859d-f6bbb57e9c96
* map haiku console colors to atari's palette.
* move the stack up for testing.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23769 a95241bf-73f2-0310-859d-f6bbb57e9c96
with an unsupported sound card or the like, the fSoundOutput initialization
is checked in more places.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23764 a95241bf-73f2-0310-859d-f6bbb57e9c96
* a little cleanup in PartitionList to respect the 80 chars/line limit
* added PartitionList::AddSpace() and alternative PartitionListRow
constructor in preparation for support of empty spaces on devices
* refactored a _InsertIndexForOffset() method, the insertion index is
now based on offset instead of partition_id (untested)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23761 a95241bf-73f2-0310-859d-f6bbb57e9c96
(I guess frenchies are guilty here, as mmu_man's ThemeAddOn have the same disease...)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23757 a95241bf-73f2-0310-859d-f6bbb57e9c96
* It now also serves as a generic GART manager and accepts bus modules as well
as custom modules of graphics drivers if they want to (could be used for the
Radeon PCI GART stuff, for example).
* Implemented GART support module for Intel i965 and G33 chipsets (the other
Intel chips will come later).
* Renamed agp bus manager to agp_gart to reflect its new functionality (even
though the AGP functionality is already outdated (due to PCIe), the GART
stuff remains current).
* Adapted existing users of the AGP bus manager to the API changes.
* Not very well tested yet...
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23754 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added some defines needed when playing with the bridge controller.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23753 a95241bf-73f2-0310-859d-f6bbb57e9c96
was a race condition when more than one CPU would enter the debugger at the
same time (or rather before one CPU could stop all the others). We now use the
inDebugger variable to tell if someone is already in the debugger and then
only process inter CPU messages and retry entering the debugger.
Since sending the synchronous broadcast most of the time hung over here with
SMP enabled I removed the synchronous flag and added a simple spin to give the
other CPUs a chance to process the halt request. Added comments that explain
the reasons and a ToDo to revert to synchronous delivery once we fixed the
problem. The kernel debugger is now usable on my quad core.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23751 a95241bf-73f2-0310-859d-f6bbb57e9c96
systems it can easily happen that the thread gets removed from the queue (when
it times out for example) during the time we don't hold the sem lock.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23749 a95241bf-73f2-0310-859d-f6bbb57e9c96
at the end of that loop we guaranteed a crash when this special handling was
triggered.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23748 a95241bf-73f2-0310-859d-f6bbb57e9c96
OS-owned bit. Otherwise we overwrite exactly the bit we later have to wait for.
Could theoretically help on legacy support issues, but I doubt it since most
hardware probably does not even use EHCI legacy support as it's normally not
needed to support full/low-speed input devices.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23747 a95241bf-73f2-0310-859d-f6bbb57e9c96
"teams".
* "team" without arg prints info about the current team.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23746 a95241bf-73f2-0310-859d-f6bbb57e9c96
path. Makes the "teams" output prettier and "team <name>" becomes
usable.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23745 a95241bf-73f2-0310-859d-f6bbb57e9c96
useful soon so that you can actually do something after entering KDL.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23742 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Implemented _RemoveTransferFromEndpoint
* Reworked _AppendChainDescriptorsToEndpoint as now every endpoint has (must have) a dummy descriptor
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23741 a95241bf-73f2-0310-859d-f6bbb57e9c96
pointer (as needed by the G33 chipset).
* Minor debug output improvements.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23739 a95241bf-73f2-0310-859d-f6bbb57e9c96
This should be in line with all uses of scheduler_enqueue_in_run_queue() and
simplifies a few places where it is used.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23738 a95241bf-73f2-0310-859d-f6bbb57e9c96
controller ownership in EHCI to aid debugging USB legacy support issues.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23735 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Fixed _SubmitControlRequest in order to use _AppendChainDescriptorsToEndpoint
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23734 a95241bf-73f2-0310-859d-f6bbb57e9c96
enqueued into the run_queue again. Modified the workaround to a panic in the
scheduler so we notice when something else does the same.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23731 a95241bf-73f2-0310-859d-f6bbb57e9c96
A thread that just missed a semaphore and put itself into the sems notify
queue could be enqueued into the run queue by release_sem_etc() of another
CPU before the CPU running the thread had a chance to reschedule it. Therefore
there is a timeframe where a thread can be running on one CPU and already be
in the run queue again. In this case no other CPU may schedule this thread
because then it would overwrite the threads' CPU pointer which kills the rest
of the scheduler logic, smp_get_current_cpu() and everything that depends on
that (like the kernel debugger). The more CPUs you have the easier this could
happen, up to the point where it was always triggered during boot on my quad
core system. The system would freeze and you could not enter the kernel
debugger, because two CPUs thought they were the same and disabled each other
through SMP communication. This makes booting my system stable and might fix
the occasional hang on boot for other SMP systems with only 2 CPUs/cores.
I've put a ToDo comment that details this above the workaround. Maybe we
should fix this in another way. Reviews, comments and suggestions welcome ;-)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23721 a95241bf-73f2-0310-859d-f6bbb57e9c96
DirectConnected() could be called twice with B_DIRECT_STOP when closing
the BDirectWindow.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23718 a95241bf-73f2-0310-859d-f6bbb57e9c96
Notify the finisher thread after canceling transfers. It was possible that freeing the allocated
transfer resources would be delayed unnecessarily until some other transfer completed and woke up
the finisher thread. Found by Salvatore Benedetto, thanks!
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23714 a95241bf-73f2-0310-859d-f6bbb57e9c96
transfer resources would be delayed unnecessarily until some other transfer completed and woke up
the finisher thread. Found by Salvatore Benedetto, thanks!
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23713 a95241bf-73f2-0310-859d-f6bbb57e9c96
* set_gtt_entry() used the wrong index to fill the GTT - this could have never
worked correctly when you specified more memory than the amount of stolen
memory.
* Implementing maintaining resources for emulating overlay using the 3D engine
on i965. I don't yet commit the actual overlay code, as that is a) ugly, and
b) does not work yet.
* Moved AreaKeeper into its own header.
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23709 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Our behaviour differs a bit from how BeOS handles those windows, added a
comment to the code which explains that, and how we could change it if we
really wanted to.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23705 a95241bf-73f2-0310-859d-f6bbb57e9c96
* renamed trasfer_data memeber top to first_descriptor
* added data_descriptor member to transfer_data (useful for control transfer)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23702 a95241bf-73f2-0310-859d-f6bbb57e9c96
so in the first place)
* Renamed local variable descriptor to current in the finisher thread
* Using next_done_descriptor instead of next_logical_descriptor, as the latest
is used to keep track of all descriptors that belongs to the transfer
* Added _UnlinkTransfer private method
* Implemented _FreeDescriptorChain
* Moved endpoint pointer from the ohci_general_td structur to the transfer_data_s
structure, ad the ohci_general_td has already a transfer_data_s pointer which can
be used to the endpoint pointer reducing ridundancy.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23701 a95241bf-73f2-0310-859d-f6bbb57e9c96
are not that useful, and the terminal doesn't like it anyway.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23700 a95241bf-73f2-0310-859d-f6bbb57e9c96
the command would overwrite its own output, not always on the bottom of the
screen.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23699 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added block_writer thread that continuously writes back blocks for all current
block caches.
* A block cache now maintains the number of dirty blocks if it doesn't use
transactions. That knowledge could also be used in block_cache_sync()...
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23698 a95241bf-73f2-0310-859d-f6bbb57e9c96
For commands with this flag set, the parser won't parse the
arguments provided (it will only check for matching parentheses and
brackets), but will pass the unparsed argument list string to the
command instead.
* Set the new flag for the "expr" command, so one doesn't have to quote
the expression to evaluate anymore (or put it in parentheses).
* Fixed tokenizing of quoted and unquoted strings in expression mode.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23697 a95241bf-73f2-0310-859d-f6bbb57e9c96
* This should speed up writing a transaction considerably.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23694 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Removed the public hash_grow() function again (at least for now, it's only
private).
* Removed the newSize argument from hash_grow(); it will compute the new size
automatically.
* The block cache is now using hash_insert_grow() instead of hash_insert()
which should make hash lookups much faster with some 10 thousand blocks,
also increased the initial table size from 32 to 1024...
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23692 a95241bf-73f2-0310-859d-f6bbb57e9c96
when the view is detached, fRenderer has already been released, and wouldn't
unlock the looper anymore in GLTeapot. This fixes bug #1626.
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23691 a95241bf-73f2-0310-859d-f6bbb57e9c96
already using.
* We don't have to try posting _QUIT_ more than once, as it cannot block; the
looper is local, so direct message passing is used in this case.
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23690 a95241bf-73f2-0310-859d-f6bbb57e9c96
printing the last 30 entries, it continues the last iteration, thus
making the more common use case more comfortable. The old functionality
is still available via "traced 0".
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23689 a95241bf-73f2-0310-859d-f6bbb57e9c96
views don't have a valid screen clipping yet. If then later we want
to invalidate the clipping of an entire hierarchie, the traversal stops
before reaching some of the child views, because the assumption was that
for any views with invalid screen clipping, their child views have invalid
screen clipping as well. Though this might cost a little performance, we
always invalidate the screen clipping of all child views, ignoring the
flag of the current view. Fixes ticket #1198 (garbled screen clipping of
E-Mail prefs and WonderBrush tool area when switching tabs).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23688 a95241bf-73f2-0310-859d-f6bbb57e9c96
kSyscallParametersInfos to kExtendedSyscallInfos) and added "name"
field. Now the classes for syscall kernel tracing don't need to lookup
the syscall function symbol anymore, which speeds up printing/filtering
of those entries dramatically.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23687 a95241bf-73f2-0310-859d-f6bbb57e9c96
is recorded in a kernel trace entry (if tracing is enabled).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23686 a95241bf-73f2-0310-859d-f6bbb57e9c96
volumes root directory when trying to unmount it. This fixes bug #1694.
Thanks to Ingo for investigating this! :-)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23685 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added "printteam" switch to "traced" command, enabling the printing of
the team ID.
* Added "team" filter to the "traced" command expression language.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23684 a95241bf-73f2-0310-859d-f6bbb57e9c96
comfortable number. Somewhat more complex "traced" filter expressions
tended to exceed the old limit easily.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23683 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Made the iterator static, so that it's possible to move from the
iteration position of the previous invocation to the current start,
instead of always having to start from the beginning or the end.
* Filtered backward iteration:
- Restrict the range to dump to the entries between the first and the
last filter match.
- Use new FILTER_MATCH entry flag to avoid applying the filter a
second time in the print loop.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23681 a95241bf-73f2-0310-859d-f6bbb57e9c96
- Changed Backgrounds preflet to account for the fixes in BColorControl
First commit :) Hi everybody!
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23680 a95241bf-73f2-0310-859d-f6bbb57e9c96
vm_cache_write_modified() here anymore since quite some time, it actually
doesn't make any sense to call the file system's "fsync" method here.
This should make syncing all file systems much faster when many vnodes are
in use.
* If a file system doesn't use the file cache, it can still just sync everything
it needs to in its "sync" method.
* Added a TODO item on how to improve sync speed further, if necessary.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23679 a95241bf-73f2-0310-859d-f6bbb57e9c96
write code aligned to what one has written in the comment (or the
other way around).
* Made trace_entry structure doubly linked, by introducing a
previous_size member. By using bit fields, shrinking the flags field
to 4 bits, and not saving the lower two bits of size and previous_size
(which are always 0 due to alignment), the structure remains 4 byte
sized and can still address the same entry size.
* kBufferSize is no longer one less than it could be.
* "traced" command:
- Use static variable for the iteration state rather then cluttering
the temporary debug variable name space.
- The <count> parameter can now be negative, in which case the entries
before (and including) <start> are printed.
- Added a new optional parameter, specifying the maximal number of
entries to be filtered. Filtered iteration is beautifully
comfortable now.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23678 a95241bf-73f2-0310-859d-f6bbb57e9c96
command usage texts, which can be too long for kprintf().
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23677 a95241bf-73f2-0310-859d-f6bbb57e9c96
Implemented palette mode and fixed bugs listed at ticket #1701. Thanks
for your work!
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23671 a95241bf-73f2-0310-859d-f6bbb57e9c96
We use an indirect page descriptor instead of pointing the page to itself like on x86.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23668 a95241bf-73f2-0310-859d-f6bbb57e9c96
* the structure of the add-on was originally designed to handle all kinds of
different input devices, but has been limited to handle Wacom tablets for
now, since our mouse add-on handles the rest already.
* various Wacom Tablets are supported including Cintiq Partner, Graphire,
Graphire2/3/4, Intuos, Intous2/3, PenStation, PenPartner and Volito
TODO: Currently, the add-on does not work for some reason, though the kernel
driver publishes a devfs entry and the input_server picks it up, the Wacom
device thread is running. Need to investigate...
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23667 a95241bf-73f2-0310-859d-f6bbb57e9c96
* the driver should be generic for all Wacom tablets, but there is a
special control transfer to put the devices in to "absolute mode", it
may not work with future tablets. The driver allows to use read devices,
for which there is a special protocol. If the read request has a certain
size, then the driver will transmit info on the device, like the vendor
and product id as well as the max the packet size, for reads larger than
that, it will issue an interrupt transfer and put the raw data received
from the device behind the info header
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23666 a95241bf-73f2-0310-859d-f6bbb57e9c96
in question as it used to find the view that is under the mouse (found
during a short phone session with stippi :-)). This fixes bug #1714.
* The local view clipping is still not correctly maintained by the
app_server, but that only affects the drawing now. I've added some
commented out code that give you some visual feedback on this problem
(ViewLayer::MarkAt()).
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23663 a95241bf-73f2-0310-859d-f6bbb57e9c96
disabled in most cases.
* Wrapping in make_space() was broken. When wrapping the second time or
later, sFirstEntry would already be greater than sAfterLastEntry and
resetting sAfterLastEntry to the beginning of the buffer would
erroneously "free" all entries between the buffer start and the
original sAfterLastEntry. If the tracing buffer was small enough,
the odds were that a not yet fully initialized entry would already
be re-allocated, causing all kinds of weird behavior.
* When an entry that is not yet fully initialized needs to be
freed, we let the allocation causing the freeing fail. We can't wait
for the entry, since we've interrupts disabled and since the entry
initialization might even try to allocate more (buffer) entries.
* make_space() is now safe to be called in any situation, and
allocate_entry() will do that, which simplifies things there and
avoids a few duplicate checks.
* Moved maximum allocation size check from alloc_tracing_buffer() to
allocate_entry(). Just in case... :-)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23662 a95241bf-73f2-0310-859d-f6bbb57e9c96
boolean operators ("not", "and", "or") and filters matching thread IDs
or contained strings.
I'm still not fully happy with the command. It should be possible to
define a filter and then comfortably scroll through the matching
entries. Currently having to specify an index range of the unfiltered
entries is rather unhandy in combination with filtering.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23658 a95241bf-73f2-0310-859d-f6bbb57e9c96
also move the thread ID from AbstractTraceEntry to TraceEntry).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23657 a95241bf-73f2-0310-859d-f6bbb57e9c96
parent node could temporarily get invalid (ie. CheckNode() would
fail).
* Since shrinking the stream was done in edge cases only, anyway, we
will no longer do that which works around the problem. This fixes
bug #1716.
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23656 a95241bf-73f2-0310-859d-f6bbb57e9c96
dump a B+tree header resp. node.
* Use dprintf() when a transaction is too large instead of a panic; even
though the file system has to revert the transaction, it's not lethal,
and it does not corrupt your disk.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23653 a95241bf-73f2-0310-859d-f6bbb57e9c96
new size fell on a block boundary.
* Removed newline from Inode::Remove() tracing.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23652 a95241bf-73f2-0310-859d-f6bbb57e9c96
with an unlimited count, we just drop it and schedule the next message
in the future. This way applications won't get swamped with pulse
messages after a longer KDL session.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23647 a95241bf-73f2-0310-859d-f6bbb57e9c96
So now there's a central place to enable tracing in general and for
individual components.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23645 a95241bf-73f2-0310-859d-f6bbb57e9c96
"block_cache" to dump info about transactions.
* Improved tracing.
* Now uses the new add_debugger_command_etc().
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23644 a95241bf-73f2-0310-859d-f6bbb57e9c96
caused old entries (that were part of the same transaction) to be
overwritten.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23642 a95241bf-73f2-0310-859d-f6bbb57e9c96
used it for an hour or so, I really wonder how we could live without it.
:-)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23640 a95241bf-73f2-0310-859d-f6bbb57e9c96
code:
- The vec array to contain the block list and the index block was one entry
to small.
- But that didn't really matter, as RunArrays/run_array was broken and never
put anything into the log; we only ever wrote index headers. BFS would
totally screw up the disk when trying to replay the log (even though the
replay code itself was and is working fine).
- If a log entry ended at the end of the log area, BFS could overwrite the
first block after the log with the next entry.
* run_array now adopt the sorting stuff from the sorted_array. Blocks in the
log are now always sorted.
* Added TODO item to sorted_array as it's not endian safe (will only work
correctly when BFS is used in the native endian).
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23638 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Refactored everything to C++ with the different devices as subclasses
* Added proper ACM detection with parsing of the ACM descriptors
* Added device transfer error handling and fixed some concurency issues
* Big cleanup to conform to our style guide
This should make at least ACM stable to use. Commiting this over my K850i with
ACM compliant USB modem and UMTS data connection. Note that support for all
other device classes (Prolific, FTDI and KLSI) is untested but should work the
same as before. Note also that since we currently lack a TTY module this will
only build/work for R5 or Dano with the proper TTY headers.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23634 a95241bf-73f2-0310-859d-f6bbb57e9c96
management
* added labels for partitions in the DiskView
* added selection via clicking a partition in the DiskView
* indicated menu items for unimplemented features
* added help message for freshly opened DriveSetup
* added TODO file with some of my ideas for the next steps
* refactored adoption of current disk/partition, the disk is not
unnecessarily deleted and recreated anymore
* gone is the colorfulness, the partitions are colored in greys according
to their level in the hierarchy
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23633 a95241bf-73f2-0310-859d-f6bbb57e9c96
since the changes to where the mime database write support lives
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23629 a95241bf-73f2-0310-859d-f6bbb57e9c96
incorrectly recognized as iframe. Fixes the read fault when doing "sc"
for a kernel thread.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23628 a95241bf-73f2-0310-859d-f6bbb57e9c96
BFS now validates the superblock and the boot menu now lists the image if I force checking for kernel_x86. \o/
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23626 a95241bf-73f2-0310-859d-f6bbb57e9c96
its parent while still holding the team spinlock. We were racing with
wait_for_child(), since after the child invoked
team_set_job_control_state(), the parent thread could continue as soon
as the team spinlock was released. The SIGCHLD could thus arrive way
later and interrupt another syscall. This could be reproduced with the
compile_bench.sh script from time to time: When interrupted while
waiting for the next subprocess, the gcc frontend would delete a still
needed temporary file.
The whole thing is actually only a problem, because we don't support
automatic syscall restarts yet.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23625 a95241bf-73f2-0310-859d-f6bbb57e9c96
parameters, now. We print 64 bit values correctly, and also fetch
strings from userland and print them.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23620 a95241bf-73f2-0310-859d-f6bbb57e9c96
checks it now.
* Check for NULL pointer in alloc_tracing_buffer_strcpy(), and also
determine the length of userland strings before allocating the buffer
(using user_strlcpy()).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23619 a95241bf-73f2-0310-859d-f6bbb57e9c96
about syscall parameters. Particularly interesting is a type_code field
for each parameter. The mechanism isn't very accurate, but we can
classify everything in string, pointer, and integer types.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23618 a95241bf-73f2-0310-859d-f6bbb57e9c96
with a 0 size to user_strlcpy() is OK. This way one can use it as a safe
strnlen().
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23617 a95241bf-73f2-0310-859d-f6bbb57e9c96
we use a uint16 size internally (and that has to include the length of
the trace_entry structure, too.
* We now track how many entries have been written to the log during the
runtime.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23613 a95241bf-73f2-0310-859d-f6bbb57e9c96
blocks into the new transaction, but it would set that transaction on all
blocks of the old transaction, too. Also, it did not correctly update the
num_blocks/sub_num_blocks fields of the old transaction. Even worse, it did
return B_OK instead of the ID of the new transaction...
* get_writable_cached_block() did not correctly maintain the number of blocks
in the sub transaction.
* write_cached_block() did not free the original_data of a block when it wrote
it back as part of a previous transaction.
* Changed "cookie" for cache_next_block_in_transaction() to "long", so it will
be 64 bits when needed.
* Improved the API for detaching sub transactions: you can now get the blocks
of only the main (parent) transaction as well, added new
cache_block_in_main_transaction() function.
* BFS now flushes the log when there is no space left for the current
transaction.
* _WriteTransactionToLog() allocated a "vecs" array, but never freed it.
* _WriteTransactionToLog() now also supports detaching the current sub
transaction if the whole thing is getting too large (it will now also panic
if that doesn't work out).
* Removed a useless optimization: making the blocks available in the cache
isn't really needed, as all blocks in a transaction are locked into the
cache, anyway.
* Implemented Transaction::WriteBlocks().
* Minor cleanup, removed some dead code, fixed warnings in the fs_shell's
block_cache when compiled with debug output on.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23610 a95241bf-73f2-0310-859d-f6bbb57e9c96
flag -- in fact we were setting it -- so after the first syscall with 64
bit return value we were always taking the slow kernel exit.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23609 a95241bf-73f2-0310-859d-f6bbb57e9c96
* "traced" command:
- Was printing one more entry than asked to.
- Fixed broken index handling. They were starting at 0, but the last
one was sEntries nevertheless. We consistently let them start at 1,
now. 0 can be passed as special index, causing the last entries to
be printed.
- Added options "backward"/"forward" which will print the entries
preceding respectively succeeding the ones printed on the previous
invocation. The command is continuable in this case, i.e. simply
pressing RET afterwards will reinvoke the command, allowing for
comfortable scrolling through a long list of entries.
- Added detailed usage message.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23607 a95241bf-73f2-0310-859d-f6bbb57e9c96
keydown. Fixed SetMaxBytes() so that it respect multibyte characters
(it removes the whole character in case it doesn't fit).
This can be seen in BColorControls, where you can't write numbers with
more than 3 characters anymore.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23605 a95241bf-73f2-0310-859d-f6bbb57e9c96
* With post syscall debugging enabled, the x86 syscall handling didn't
remove all parameters from the stack after calling the respective user
debugger hook. Should have been harmless though, since the following
code didn't rely on the stack being in order.
* Added syscall pre/post (kernel) tracing functions
trace_{pre,post}_syscall(). They are generic, but need to be invoked
by the architecture specific syscall code. Currently only done for
x86.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23600 a95241bf-73f2-0310-859d-f6bbb57e9c96
since that's seriously unhealthy.
* Added TODO that uninitialized entries must not be discarded.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23599 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Continue working in the _FinishTransfer thread
* added next_done_descriptor in ohci_[general|isochronous]_td structure in order to handle
collisions.
* added next_logical_descriptor to ohci_isochronous_td structure
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23594 a95241bf-73f2-0310-859d-f6bbb57e9c96
our Terminal only works correctly with fixed width fonts, now the font
menu filters out variable width ones. For some reason, though, Konatu
Tohaba isn't recognized as fixed. Various other changes.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23591 a95241bf-73f2-0310-859d-f6bbb57e9c96
of the descriptor from its physical address returned by the controller.
NOTE: As stated in the commented code, when the controller has finished processing
some descriptors, it returns the first element physical address of an heterogeneous list
(general + isochronous) and there is not way to tell the descriptor type.
This solution, which implementes two hash tables (one for generic descriptors and
one for isochronous) is the one adopted from *BSD.
If somebody has better idea, please let me know. :)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23589 a95241bf-73f2-0310-859d-f6bbb57e9c96
invoke_debugger_command() is now automatically preceded by
"usage: <command name>", so the string passed to
add_debugger_command_etc() shouldn't contain it anymore.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23584 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Put cookies and error stuff to toscalls.c.
* dump all cookies instead of fixed list.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23582 a95241bf-73f2-0310-859d-f6bbb57e9c96
before releasing our cache reference. Otherwise removing a vnode (triggered
by releasing the cache in our thread) could need pages we still own.
* Put the caches and pages into a union to save stack space; they are not
needed at the same time.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23580 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Removed ID 0x0141 for the FX 6600 as well until it's fixed, see ticket #1530
for details.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23579 a95241bf-73f2-0310-859d-f6bbb57e9c96
add_debugger_command(), but additionally takes parameters "usage"
and "flags".
* Added add_debugger_command_alias() which creates another name for an
existing command.
* Added print_debugger_command_usage() to print a command's usage.
* invoke_debugger_command() intercepts invocations with "--help" and
prints the command's usage text, if it is known. If unknown, the
command will be called normally.
* Made use of the new functions in debug.cpp.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23573 a95241bf-73f2-0310-859d-f6bbb57e9c96
a command is executed anymore. Instead the least recently used
temporary variable is overwritten, if there's no free slot for a new
temporary variable.
* Removed the special handling for the command result variable ("_"). It
just works like any other temporary variable, now.
* Individual temporary variables can be removed (e.g. using the "unset"
command).
* Added unset_all_debug_variables() and "unset_all" command to unset
all persistent and temporary variables.
* Removed remove_all_temporary_debug_variables and renamed
remove_debug_variable() to unset_debug_variable().
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23568 a95241bf-73f2-0310-859d-f6bbb57e9c96
(so we can't allocate more physical pages than virtual address space
anymore, but so what?).
* Used the new CACHE_LARGE_SLAB flag as a temporary work-around; else
the slab would easily create several thousands of areas, which our
area code (and kernel heap) can't really handle that well (gets
awfully slow).
* Block caches with the same size could share the same slab, but we
don't do that yet.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23567 a95241bf-73f2-0310-859d-f6bbb57e9c96
paging support to KDL (but not the on-screen debug output for now).
* Defaults to "on", use the new "paging" KDL command to turn it off (or on
again).
* When pressing 'q' while it is waiting for a key, it will now eat the rest
of the commands output (helpful for slow screen output of a large data set).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23566 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Fixed the usage text of the "help" KDL command.
* Made the "ambiguous command" warning shorter, so that it will still fit in
the exception buffer.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23565 a95241bf-73f2-0310-859d-f6bbb57e9c96
* As a temporary work-around for the current slab allocator's area usage,
I added the CACHE_LARGE_SLAB flag, which will force the allocator to
use larger areas.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23564 a95241bf-73f2-0310-859d-f6bbb57e9c96
value greater or equal its size (actually untested, but at least Haiku
still boots with these changes :-)).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23563 a95241bf-73f2-0310-859d-f6bbb57e9c96
MainWindow::_Initialize()... setting the name and block size should work,
though I have not tested this yet due to lack of available partitions.
TODO: Use driver settings API from libroot to build the parameter string
and move the GUI of the InitParamsPanel into the BFS add-on, implement
BPartition::GetInitializationParameterEditor() accordingly.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23561 a95241bf-73f2-0310-859d-f6bbb57e9c96
in the critical error handler. In the high level function, the jmp_buf is
now allocated on the stack and placed in the "cinfo->err" structure. This
should make the mechanism thread-safe. Unfortunately, we don't use the
original libjpeg anymore as is, but this seems to be frozen code since a
few years anyways. If you have any better suggestions, please don't
hesitate to mention them! :-)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23560 a95241bf-73f2-0310-859d-f6bbb57e9c96
that only loads bitmaps and is supposed to return a status_t error from
the Translate() function, especially for people using this in mission
critical applications.
The requirements on the error handler that is
to be installed for the jpeg library are not to return to the calling
function for critical errors. C++ exceptions seem like the
natural solution to the problem, but unfortunately, they simply don't
seem to work, possibly because we are inside an add-on. Ingo had the idea
to use setjmp() and longjmp() to go directly from the error handler back
to the top level code and this works. I have implemented this from what
I understand from reading the opengroup spec, but the compiler currently
issues a warning. Feel free to fix. The desired effects are achieved though,
the translator recovers correctly from broken jpg files now.
Also, I don't know if the translator should somehow "uninstall" the
breakpoint. Again, feel free to fix or tell me.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23559 a95241bf-73f2-0310-859d-f6bbb57e9c96
cleanup thread, since, not being attached to the window, Window()
returned NULL. Now CustomTermView::NotifyQuit() accounts for this, and
sends the message to the first window in the BApplication. Moreover,
RemoveTab() would always remove the currently selected tab, and not the
requested one.
Changed a printf() to fprintf().
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23558 a95241bf-73f2-0310-859d-f6bbb57e9c96
worked). Fixed. Also moved handling of default shell command from
TermView to Shell, where it belongs.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23557 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added some temporary variables to the commands.
* Use parse_expression() where appropriate.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23556 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Fixed removing temporary variables (they would always be removed except one
after the first command).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23555 a95241bf-73f2-0310-859d-f6bbb57e9c96
Now starts doing stuff in the loader when bootstrapping the .prg from ARAnyM.
For now it just dumps the cookies.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23552 a95241bf-73f2-0310-859d-f6bbb57e9c96
debugger expression language. By default it reads a uint32 value.
Another target size (1, 2, 4, or 8 bytes) can be specified in braces
after the "*" (e.g. "*{2}address" for uint16).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23551 a95241bf-73f2-0310-859d-f6bbb57e9c96
* The kernel debugger does now define some temporary variables when
entered (current thread and team, etc.).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23549 a95241bf-73f2-0310-859d-f6bbb57e9c96
password window is now font sensitiv, can be seen as part of ticket #705
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23547 a95241bf-73f2-0310-859d-f6bbb57e9c96
that is a little more powerful than BeOS'. It features:
- Persistent and temporary uint64 variables. The former kind is set
only by the user. The latter (those prefixed "_") can be set
automatically by commands, thus e.g. making it easier to access
members of a dumped structure. They are unset when the next command
is invoked. The special temporary variable "_" is defined as a
command's return value.
- Expressions can contain nested command invocations using brackets
("[ ... ]").
- Command lines are parsed by the expression parser, too. They can
contain command invocations (in brackets) and expressions (in
parentheses).
* Added debugger commands:
- expr: Evaluates the given expression and prints the result.
- unset: Undefines a variable.
- vars: Prints the values of all defined variables.
* Moved debugger command code into its own source file.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23546 a95241bf-73f2-0310-859d-f6bbb57e9c96
* sort the partitions by id (TODO: should be disk offset, but works as
intended now)
* expand the partition tree entries by default
* renamed DriveVisitor to ListPopulatorVisitor, moved implementation into
class definition
* added MountAllVisitor and used it to implement according menu item
* added menu item members to MainWindow, so it keeps the pointers
* added MainWindow::_EnabledDisableMenuItems() which looks for the
current disk and partition and their properties to en-/disable the items
* moved BDiskDevice member from DiskView to MainWindow, renamed to
fCurrentDisk
* implemented mounting and unmounting the currently selected partition,
mounting works, unmounting does not work as in Tracker, but the error
description is not as helpful, or just as helpful, since Force Unmount
does not work in Tracker at the moment
* implemented initializing the selected partition, not tested to the end,
but likely works, so beware! (TODO: finish the parameter window and use it,
partitions are hardcoded to "BFS Init Test" and 2048 blocksize). The
process displays a warning at the beginning and another one at the end
before writing anything to disk, but please do take it seriously... :-)
* store and restore the listview column settings (width of columns mostly)
* more appropriate usage of the BDiskDeviceRoster API
* improved DiskView display a little with frames and more contrast in the
colors
* implemented FrameResized() to adapt the box layout
* no longer pass disk pointer to BDiskDeviceRoster::VisitEachPartition(),
since it will overwrite it!
* no longer use BDiskDeviceRoster at all, BPartition::VisitEachDescendant()
is what we need
* added a WIP InitParamsPanel, does not compile, but is not added to the
Jamfile yet, it will be a blocking panel like a BAlert and will later
be refactored into the parameter editor add-on for BFS
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23545 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Made the block_cache KDL command dump a bit more useful info (number of
referenced and dirty blocks).
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23540 a95241bf-73f2-0310-859d-f6bbb57e9c96
* with 1 GB or more, the semaphore limit is now 131072 instead of 65536.
* double the heap when there is 1 GB or more (64 MB).
* the low memory handler now also watches semaphore usage; in the end,
we need a low resource handler, not a low memory handler.
* create_sem_etc() no longer calls vfs_free_unused_vnodes() directly as
this could actually deadlock (at least because the address space is a
R/W lock, not a recursive lock).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23538 a95241bf-73f2-0310-859d-f6bbb57e9c96
compute the bit offsets correctly if the last block of the whole
bitmap was only a partial block.
* Added new bfs_allocator KDL command.
* Renamed the KDL command bfsinode to bfs_inode.
* Added "--help" argument to bfs_inode and bfs KDL commands.
* Added more tracing in the block allocator.
* Turned on the ASSERT() macro in non-debug builds.
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23534 a95241bf-73f2-0310-859d-f6bbb57e9c96
when a pattern was involved).
* alloc_tracing_buffer() no longer allocates anything when you ask for
a zero byte buffer.
* Fixed warning.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23533 a95241bf-73f2-0310-859d-f6bbb57e9c96
* improved the "block_cache" KDL command: it can now also dump blocks,
added support for the "--help" argument.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23532 a95241bf-73f2-0310-859d-f6bbb57e9c96
* More test code
* it actually runs now, till _start.
However, calling TOS from C is broken: we use 32 bit param alignment on funcs, but TOS expects 16 bit... need to use asm macros instead of funcs.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23531 a95241bf-73f2-0310-859d-f6bbb57e9c96
(suggested by stippi). The movement threshold will be subject to
changes, as I only tested on vmware and it's probably too high.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23528 a95241bf-73f2-0310-859d-f6bbb57e9c96
* also added fake FAT descriptors to avoid crashing TOS, but it doesn't boot yet as floppy.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23525 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Don't execute a command anymore, if the given prefix is ambiguous.
* Added tab completion for commands.
* Added on-the-fly help while typing a command line. It is triggered
by pressing tab at a position after the space following the command.
It is implemented by calling the command with argument "--help", which
doesn't work yet with most commands, but some already print their
usage in this case.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23521 a95241bf-73f2-0310-859d-f6bbb57e9c96
now, not the number of entries shown (much more usable this way).
* Added missing license.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23520 a95241bf-73f2-0310-859d-f6bbb57e9c96
system when pressed during the boot process, as intended.
* Removed other incorrect key codes, except the one for BREAK, since it
is used (but won't work).
* Ctrl-Alt-Del now also resets the machine when in KDL, at least when
waiting for user input.
* arch_debug_blue_screen_getchar() does also generate the respective
escape sequences for HOME, END, and DELETE, now. Furthermore it
generates characters for Ctrl-A through Ctrl-Z.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23512 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Handle failing to remove the old image in case it's not there.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23510 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Style cleanup.
* Renamed class GebsPreferences to Preferences.
* Made NoiseBarMenuItem::fBusyWaiting/fLost private and added getters
and setters.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23498 a95241bf-73f2-0310-859d-f6bbb57e9c96
any devices anymore it gets unloaded. Also made sure the function pointers
are properly initialized and disabled debug output.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23494 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Fixed wrong start and size used in the runtime_loader
* Fixed off by one error in the matching loop of the cleanup hook
* Make sure we successfully acquire the locking sem of the exit stack
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23493 a95241bf-73f2-0310-859d-f6bbb57e9c96
transaction ends or has been aborted.
* BFS now listens for transactions when it created an inode to see if
the transaction will be aborted without freeing the inode (in which
case it will panic for now).
* Started implementing tracing support, but it's not working yet.
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23492 a95241bf-73f2-0310-859d-f6bbb57e9c96
though there was nothing to do (if 'diff' was larger than 'needed').
* Improved KDL command output.
* Added debug output to the allocation functions.
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23491 a95241bf-73f2-0310-859d-f6bbb57e9c96
As (our) gcc unfortunately uses atexit() to clean up lazily initialized static
variables inside functions we have to ensure that we do the right thing with
unloadable shared objects. In case a shared object was unloaded that installed
an atexit() hook the application would crash on exit. We now implement a
callback into libroot that is used to call all the atexit() hooks of a
component that is to be unloaded. Most prominently this fixes the media_server
crash at shutdown.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23486 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added tool to calculate the checksum (TOS wants a real one to 1234, not aa55).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23483 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added function to allocate space in the buffer.
* Dump() now fills a buffer instead of printing its data directly.
* This allows the new "#pattern" argument of the "traced" command to
work. When you're using that, the index of the trace entry is printed
out, too, so that you can then get a full dump around the hits.
* Added an AddDump() method to the AbstractTraceEntry class so that
there is no need to call the inherited function anymore.
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23479 a95241bf-73f2-0310-859d-f6bbb57e9c96
DEBUG macro; they are now added only if BFS_DEBUGGER_COMMANDS is
defined (which is now done by default in the Jamfile).
* Added "bfs" KDL command which dumps volume information and the super
block.
* Made use of the new tracing API to trace block and inode actions
(and the new AbstractTraceEntry class I forgot to mention in the last
commit). Is compiled in only when BFS_TRACING is enabled (defaults to
off in the standard builds).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23464 a95241bf-73f2-0310-859d-f6bbb57e9c96
will not accept if the allocator returns NULL and crashes instead
(ie. not compiling in tracing would have crashed if some module tried
to use it).
* Added total entries count to the KDL command output.
* Fixed computing the start index of the KDL command.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23460 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Implemented an optional tracing layer that can be used in the kernel.
Nice to use if you don't have serial output or need something that doesn't
slow down the system as much.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23447 a95241bf-73f2-0310-859d-f6bbb57e9c96
* vfs_disconnect_vnode() did not put away its vnode reference.
* disconnect_mount_or_vnode_fds() did always throw the current working
directory of all apps on the same mount away, even if only a specific
vnode should have been disconnected.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23445 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Removed now unnecessary devfs calls again
* Add an explanation in device_removed()
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23442 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Cache the looked up image symbols as well as the API version in the driver entry
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23441 a95241bf-73f2-0310-859d-f6bbb57e9c96
* remove some unneeded stuff in start.
* we just quit the boot prg instead of rebooting (should try Puntaes also)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23440 a95241bf-73f2-0310-859d-f6bbb57e9c96
the ls output.
* Made the array the size it actually is.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23437 a95241bf-73f2-0310-859d-f6bbb57e9c96
#1436. Thanks!
* Changed syscall color to blue (signals are red).
* Added thread number to the signal output.
* -g turns off signal tracing now.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23436 a95241bf-73f2-0310-859d-f6bbb57e9c96
* fix a rounding problem when layouting the image
Thanks!
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23427 a95241bf-73f2-0310-859d-f6bbb57e9c96
mix up the resizingMode and flags field in the BView constructor. This does
not cause problems under BeOS but was causing wrong follow modes when those
applications were run under Haiku. In case such an application is detetected
a corresponding warning is printed out. Also added a comment explaining the
rational behind the change and a ToDo for the later cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23424 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Move most of MIME database support out of libbe and into registrar
* Use the (async) MessageDeliverer instead of a synchronous SendMessage in _SendMonitorUpdate
This fixes a deadlock when the message port of a MIME database watching
application gets full as documented in bug #1311.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23423 a95241bf-73f2-0310-859d-f6bbb57e9c96
B_MOUSE_MOVED message does not already contain the same buttons as a
following B_MOUSE_DOWN message... fixes mouse clicks being ignored
when you are moving the mouse at the same time when clicking
(using Haiku's mouse input_server device on BeOS or ZETA)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23421 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Beginnings of devfs interaction to properly publish/unpublish under Haiku
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23412 a95241bf-73f2-0310-859d-f6bbb57e9c96
* handle one more allocation failure in device_added
* improved style consistency in a few places
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23409 a95241bf-73f2-0310-859d-f6bbb57e9c96
and you never pressed any key on the usb keyboard, you could suddenly
be flooded with a random key...
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23403 a95241bf-73f2-0310-859d-f6bbb57e9c96
should fix detection of Audigy2 Value (it was trying to check the revision id instead of the device id)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23399 a95241bf-73f2-0310-859d-f6bbb57e9c96
* If two intersecting windows didn't change their position but their
order, the dirty region wouldn't contain the region that would need
to be updated because of that order change. This fixes bug #827.
* When a hidden window was on the new workspace (but not on the old one),
its region would be included in the dirty region, but shouldn't have
been. This caused the app_server to update a larger region than
necessary.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23398 a95241bf-73f2-0310-859d-f6bbb57e9c96
which already existed in the region backend ported from XOrg
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23394 a95241bf-73f2-0310-859d-f6bbb57e9c96
* save the fd so we can use it :)
* open the pty read-write else it won't work...
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23393 a95241bf-73f2-0310-859d-f6bbb57e9c96
Actually getlogin didn't belong to usergroup.c in the first place anyway.
And definitely not to the kernel.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23391 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Some restructuring and cleanup
This keeps the input_server from polling a removed device continuously.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23388 a95241bf-73f2-0310-859d-f6bbb57e9c96
That way menubars are navigable via keyboard. There are still glitches,
but menu keyboard navigation works now.
Minor optimization: cache the value of CountItems() instead of calling
it multiple times.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23387 a95241bf-73f2-0310-859d-f6bbb57e9c96
Worked quite well in latest zeta, so it's already tested :)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23385 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Actually enable the periodic schedule so that any interrupts work over EHCI
For those who wait for OHCI: You can now attach your USB 1.1 mouse or keyboard
to a USB 2.0 hub and it should work.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23382 a95241bf-73f2-0310-859d-f6bbb57e9c96
couldn't be read from a file, Tracker would try 10 times with a 10 ms
timeout - but only if the creation time equals the modification time!
That was obviously supposed to be a check if the file was recent...
Now that computers are faster (even when running Haiku), it may
actually take less than one second to copy a file, so most files on
the Haiku image satisfied this thoughtful and future-proof check.
(And no, even the original BFS does not automatically increase the
modified time on close.)
* Now, mmlr came up with a better check: we just check the file's
creation time against the current time to see if it's a recent file.
That should work a bit more reliable :-)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23376 a95241bf-73f2-0310-859d-f6bbb57e9c96
Haiku it is rather slow (on my machine about 80% slower than on Zeta)
and sometimes a compilation even fails, due to what looks to me like a
problem with gcc's subprocess synchronization (our wait()/waitpid() or
friends might have some race condition).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23371 a95241bf-73f2-0310-859d-f6bbb57e9c96
23139 into trunk, with roughly the following changes (for details svn
log the branch):
* The int 99 syscall handler is now fully in assembly.
* Added a sysenter/sysexit handler and use it on Pentiums that support
it (via commpage).
* Got rid of i386_handle_trap(). A bit of functionality was moved into
the assembly handler which now uses a jump table to call C functions
handling the respective interrupt.
* Some optimizations to get user debugger support code out of the
interrupt handling path.
* Introduced a thread::flags fields which allows to skip handling of
rare events (signals, user debug enabling/disabling) on the
common interrupt handling path.
* Got rid of the explicit iframe stack. The iframes can still be
retrieved by iterating through the stack frames.
* Made the commpage an architecture independent feature. It's used for
the real time data stuff (instead of creating a separate area).
* The x86 CPU modules can now provide processor optimized versions for
common functions (currently memcpy() only). They are used in the
kernel and are provided to the userland via commpage entries.
* Introduced build system feature allowing easy use of C structure
member offsets in assembly code.
Changes after merging:
* Fixed merge conflict in src/system/kernel/arch/x86/arch_debug.cpp
(caused by refactoring and introduction of "call" debugger command).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23370 a95241bf-73f2-0310-859d-f6bbb57e9c96
This fixes the bug described by Stefano in r23343.
* Therefore, I enabled cached menu windows again.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23356 a95241bf-73f2-0310-859d-f6bbb57e9c96
