interrupts when invoking it. The user TLB invalidation function essentially only
reads and writes back control register 3 (cr3) which holds the physical address
of the current page directory. Still a preemption between the read and the write
can cause problems when the last thread of a team dies and therefore the team
is deleted. The context switch on preemption would decrement the refcount of the
object that holds the page directory. Then the team address space is deleted
causing the context switch returning to that thread to not re-acquire a
reference to the object. At that point the page directory as set in cr3 is the
one of the previously run thread (which is fine, as all share the kernel space
mappings we need). Now when the preempted thread continues though, it would
overwrite cr3 with the physical page directory address from before the context
switch still stored in eax, therefore setting the page directory to the one of
the dying thread that now doesn't have the corresponding reference. Further
progressing the thread would release the last reference causing the deletion
of the object and freeing of the, now active again, page directory. The memory
getting overwritten (by deadbeef) now completely corrupts the page directory
causing basically any memory access to fault, in the end resulting in a
triplefault. This should fix bug #3399.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32118 a95241bf-73f2-0310-859d-f6bbb57e9c96
disk device to the locking functions, not only the ID of the disk device
itself.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32094 a95241bf-73f2-0310-859d-f6bbb57e9c96
allow for more parallelism. Also introduce seperate locks for the bins and
for page allocation. This greatly reduces lock contention and reduces the
duration the locks are held due to them overall protecting less code. Now only
allocations of the same size hitting the same allocator or allocating larger
chunks of memory should block. Previously, basically any allocation and also
free would be mutually exclusive, making it scale pretty badely.
* Added memalign_nogrow(). As it uses heap_memalign() anyway, there's no real
reason not to allow for an alignment.
* Some cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32074 a95241bf-73f2-0310-859d-f6bbb57e9c96
ROUNDUP to use '*' and '/' -- the compiler will optimize that for powers of
two anyway and this implementation works for other numbers as well.
* The thread::fault_handler use in C[++] code was broken with gcc 4. At least
when other functions were invoked. Trying to trick the compiler wasn't a
particularly good idea anyway, since the next compiler version could break
the trick again. So the general policy is to use the fault handlers only in
assembly code where we have full control. Changed that for x86 (save for the
vm86 mode, which has a similar mechanism), but not for the other
architectures.
* Introduced fault_handler, fault_handler_stack_pointer, and fault_jump_buffer
fields in the cpu_ent structure, which must be used instead of
thread::fault_handler in the kernel debugger. Consequently user_memcpy() must
not be used in the kernel debugger either. Introduced a debug_memcpy()
instead.
* Introduced debug_call_with_fault_handler() function which calls a function
in a setjmp() and fault handler context. The architecture specific backend
arch_debug_call_with_fault_handler() has only been implemented for x86 yet.
* Introduced debug_is_kernel_memory_accessible() for use in the kernel
debugger. It determines whether a range of memory can be accessed in the
way specified. The architecture specific back end
arch_vm_translation_map_is_kernel_page_accessible() has only been implemented
for x86 yet.
* Added arch_debug_unset_current_thread() (only implemented for x86) to unset
the current thread pointer in the kernel debugger. When entering the kernel
debugger we do some basic sanity checks of the currently set thread structure
and unset it, if they fail. This allows certain commands (most importantly
the stack trace command) to avoid accessing the thread structure.
* x86: When handling a double fault, we do now install a special handler for
page faults. This allows us to gracefully catch faulting commands, even if
e.g. the thread structure is toast.
We are now in much better shape to deal with double faults. Hopefully avoiding
the triple faults that some people have been experiencing on their hardware
and ideally even allowing to use the kernel debugger normally.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32073 a95241bf-73f2-0310-859d-f6bbb57e9c96
- stubbed out arch_cpu_init_percpu(),
- make atomic ops declarations extern "C",
- move calls to [i]sync inside the asm code that needs it.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32067 a95241bf-73f2-0310-859d-f6bbb57e9c96
* SMP:
- Added smp_send_broadcast_ici_interrupts_disabled(), which is basically
equivalent to smp_send_broadcast_ici(), but is only called with interrupts
disabled and gets the CPU index, so it doesn't have to use
smp_get_current_cpu() (which dereferences the current thread).
- Added cpu index parameter to smp_intercpu_int_handler().
* x86:
- arch_int.c -> arch_int.cpp
- Set up an IDT per CPU. We were using a single IDT for all CPUs, but that
can't work, since we need different tasks for the double fault interrupt
vector.
- Set the per CPU double fault task gates correctly.
- Renamed set_intr_gate() to set_interrupt_gate and set_system_gate() to
set_trap_gate() and documented them a bit.
- Renamed double_fault_exception() x86_double_fault_exception() and fixed
it not to use smp_get_current_cpu(). Instead we have the new
x86_double_fault_get_cpu() that deducts the CPU index from the used stack.
- Fixed the double_fault interrupt handler: It no longer calls int_bottom to
avoid accessing the current thread.
* debug.cpp:
- Introduced explicit debug_double_fault() to enter the kernel debugger from
a double fault handler.
- Avoid using smp_get_current_cpu().
- Don't use kprintf() before sDebuggerOnCPU is set. Otherwise
acquire_spinlock() is invoked by arch_debug_serial_puts().
Things look a bit better when the current thread pointer is broken -- we run
into kernel_debugger_loop() and successfully print the "Welcome to KDL"
message -- but we still dereference the thread pointer afterwards, so that we
don't get a usable kernel debugger yet.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32050 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added x86_double_fault_get_cpu(), a save way to get the CPU index when in
the double fault handler. smp_get_current_cpu() requires at least a somewhat
intact thread structure, so we rather want to avoid it when handling a double
fault. There are a lot more of those dependencies in the KDL entry code.
Working on it...
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32028 a95241bf-73f2-0310-859d-f6bbb57e9c96
B_READ_ONLY_DEVICE if it has a write hook.
* This fixes bug #4141.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32004 a95241bf-73f2-0310-859d-f6bbb57e9c96
cannot assume that the file is that long - we need to check for the actual
file size specifically, and then clear the extraneous bytes based on that one.
* This fixes seeing old file left-overs in the space beyond the file size in
mmapped file. Thanks to Oliver who provided me with a nice test program to
reproduce this problem (this should also fix gcc's fix_includes app (although
I wonder what it does if a file actually ends on a page boundary).
* Also fixed a bug in precaching that would cause the last page of the cache
to be discarded, causing it to be re-read later on.
* Moved partial page clearing into its own function
read_pages_and_clear_partial(), even though it's currently only used once.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32001 a95241bf-73f2-0310-859d-f6bbb57e9c96
tracing buffer entry list at least. Eventually we should check the entries
themselves, too.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31999 a95241bf-73f2-0310-859d-f6bbb57e9c96
used to mark entries after recovering a tracing log from a previous session.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31991 a95241bf-73f2-0310-859d-f6bbb57e9c96
tracing use before real initialization to be ignored gracefully again. Fixes
#4158.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31973 a95241bf-73f2-0310-859d-f6bbb57e9c96
Moved the static variables for managing the tracing buffer into a separate
area. The area is mapped at one of a few possible physical addresses and can
be found again when rebooting. This allows us to resurrect the tracing buffer
from the previous session, which could help tremendously when tracking certain
bugs (like triple faults). There's very little checking done yet, so it is
probably not as robust as we would wish it to be.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31942 a95241bf-73f2-0310-859d-f6bbb57e9c96
call to fetch non-clear pages.
* B_PHYSICAL_BASE_ADDRESS does now imply B_CONTIGUOUS.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31932 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Reverted r31809 as it introduced a race condition; if the I/O request had been
notified, it could already been deleted at that point.
* Instead, we need to notify the request in each file system/driver that uses
it. Added new notify_io_request() function that does that exactly.
* Added a TODO comment to the userlandfs where the request notification needs
a bit more thought.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31903 a95241bf-73f2-0310-859d-f6bbb57e9c96
each attribute access needed 3 syscalls, now only one as it should.
* Renamed the new Haiku call fs_open_attr() to fs_fopen_attr(), and added a new
function fs_open_attr() that takes a path (same semantics as the
fs_[f]open_attr_dir() functions already present in BeOS).
* Merged former _kern_open_attr(), and _kern_create_attr() into one syscall.
* Cleaned up vfs.h.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31881 a95241bf-73f2-0310-859d-f6bbb57e9c96
writing lines that are printed below the previously cleared lines when paging.
Fixes bug #4145.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31865 a95241bf-73f2-0310-859d-f6bbb57e9c96
will show the next page after a timeout of 3 seconds instead of waiting for a key
to be pressed. This allows you to enjoy onscreen debug output even when you only
have a USB keyboard. Should be enough time to take a quick look or take a photo.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31814 a95241bf-73f2-0310-859d-f6bbb57e9c96
UI freezes (ActivityMonitor and ProcessController both use get_system_info() a
lot), although this is only the symptom of another problem.
* The downside is that the block cache usage information isn't as up to date as
it was previously - it's updated by the block write/notifier thread now (worst
case every 2 seconds).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31812 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Make the allocations command available even without leak checking. The sizes
that are dumped aren't as accurate without leak checking info, but having the
address and max size is already helpful.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31811 a95241bf-73f2-0310-859d-f6bbb57e9c96
about it (there is also no public API to do that in the FS yet).
* This could have caused bug #2719, although the specific reason why the FS hook
failed remains unknown. At least it won't hang in this case anymore.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31809 a95241bf-73f2-0310-859d-f6bbb57e9c96
Tracker's OpenHashTable.h which it should eventually replace. We've renamed the
class to BOpenHashTable and changed the interface slightly so that HashTableLink
became superfluous.
Adapted all the code that used it. Since the OpenHashTables no longer clash,
this should fix the GCC4 build.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31791 a95241bf-73f2-0310-859d-f6bbb57e9c96
functions.
* Since we now use UserStringParameter, this fixes the missing null termination
of the parameter string, and thus bug #4045.
* Removed UserMemoryParameter, as it's no longer in use.
* Adjusted syscalls accordingly.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31779 a95241bf-73f2-0310-859d-f6bbb57e9c96
disk; but since mount points are always kept in memory, it makes much more
sense to use lookup_vnode() instead.
* As a side effect, directory listings are no longer aborted when they contain
broken files that could not be retrieved anymore.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31775 a95241bf-73f2-0310-859d-f6bbb57e9c96
fixes#4106 for good.
* Also removed a bit of dead code in that function.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31732 a95241bf-73f2-0310-859d-f6bbb57e9c96
that we lost a few keystrokes, and would make keys (like SysReq) stick.
Thanks to Rene for the note!
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31688 a95241bf-73f2-0310-859d-f6bbb57e9c96
there are prefixed with the respective architecture name. Useful for remote
debugging a different architecture.
* <x86/arch_debugger.h>: Introduced a structure for the FPU state, so that it
isn't left to the debugger.
* Removed the _kern_get_thread_cpu_state() syscall. Was originally intended for
bdb compatiblity, but isn't really needed.
* Kernel x86 arch_get_debug_cpu_state(): The use of fnsave was broken, since
it reinits the FPU after saving the state. This resulted in weird results
when debugging functions using the FPU. We now use fxsave, if available.
Otherwise fnsave + frstor should be used -- not fully implemented yet.
Same for arch_set_debug_cpu_state().
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31682 a95241bf-73f2-0310-859d-f6bbb57e9c96
reduced the boot time in VMware by several seconds, and should also help with
booting from CD.
* Added TODOs on how to further improve the situation in the future.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31672 a95241bf-73f2-0310-859d-f6bbb57e9c96
parameter from start_system_profiler().
* Added stack depth, and interval parameters to it, though.
* Profiling the boot process is now possible.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31671 a95241bf-73f2-0310-859d-f6bbb57e9c96
patch from about a year ago (I couldn't use any code of his yet, though,
but there are a few things left). The emergency keys are triggered by
pressing Alt-SysReq + key.
* By default, only Alt-SysReq+'d' is used as a means to deliberately enter
the kernel debugger. F12 belongs to userland again, now :-)
* Debugger add-ons now have another optional method to implement their own
emergency keys - 'd' for the debugger cannot be overridden, though.
* The mechanism can be turned off via a new kernel setting, so it's not that
easy anymore to "crash" Haiku if you don't want to.
* Right now, the PS/2 driver, and the pre-input_server in-kernel debugger
keyboard mini-driver support this, USB not yet.
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31660 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added missing name parameter to the partitioning system module child creation
and child creation validation hooks. Pass the name to them.
* Added BPartitionParameterEditor interface, which is/will be used for editing
disk system specific parameters.
* Implemented partition parameter editors for BFS initialization and Intel
partition map child creation.
* Fixed the incorrect supported child partition type iteration in the Intel
partition map add-on. It does now return actual types.
* Handle the "active" flag parameter in the Intel partitioning system module.
* DriveSetup:
- Replaced the "Create" submenu by a simple menu item. The type can now by
chosen in the dialog.
- Make use of initialization and child creation parameter editors. Some
non-generic code has been moved to the respective editor implementations
(BFS, intel partitioning system).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31658 a95241bf-73f2-0310-859d-f6bbb57e9c96
profile data area, and evaluate its data - it doesn't produce any output yet,
though.
* _user_system_profiler_recorded() now also makes sure the userland app can read
from the buffer area.
* Fixed leak in SharedImage::Init().
* Made the symbol retriever more smart when it deals with kernel images; if the
image ID is no longer available, it will now use the path based image symbol
iterator (and also adds the boot kernel path, in case the module don't have
one).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31653 a95241bf-73f2-0310-859d-f6bbb57e9c96
* devfs:
- devfs_[un]publish_partition(): They no longer get the partition path as
parameter, but rather the device path and the partition name.
- Added devfs_rename_partition(), which renames an already published
partition node.
* KPartition/KDiskDevice:
- Replaced the fPublished flag by fPublishedName, the name under which the
partition is published. This simplifies UnpublishDevice() and makes it
practically infallible.
- Added GetFileName(), which only returns the partition's file name.
Simplified GetPath() by using it.
- When a partition is added/removed the subsequent sibling partitions get a
new index. Now we also rename their published device nodes (and those of
their descendents). When something goes wrong we unpublish the concerned
partition's device to be on the safe side. Would be a shame to accidentally
format the wrong partition, eh? :-)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31520 a95241bf-73f2-0310-859d-f6bbb57e9c96
KPartition::CreateChild(). CreateChild() calls AddChild(), which publishes
the new partition, though at that point offset and size were not set, so that
the published devices would not be usable.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31463 a95241bf-73f2-0310-859d-f6bbb57e9c96
* SetBusy(): Use AddFlags() instead of SetFlags() so that the other flags
aren't cleared.
* AddChild(): Publish the newly added child partition. Otherwise no-one can do
anything with it without rebooting first. Other children may need to be
republished under a new name, if their index changes, which doesn't happen
yet.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31444 a95241bf-73f2-0310-859d-f6bbb57e9c96
in case one just want to get or set the timezone.
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31370 a95241bf-73f2-0310-859d-f6bbb57e9c96
the node listener, to make sure it won't lose track.
* The DriverWatcher now also listens for B_ENTRY_REMOVED. This causes drivers to
be unpublished even if they are only symlinked.
* However, to detect new drivers in a symlinked location, we'd need special
support for those, and also need to watch the parent directory of the symlink
target - this is close to overkill, so I stayed away from implementing that
for now :-)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31267 a95241bf-73f2-0310-859d-f6bbb57e9c96
after all CPUs have been queried for their features. On SMP machines
sysenter/sysexit weren't used before due to the non-boot CPUs appearing not
to have the feature.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31226 a95241bf-73f2-0310-859d-f6bbb57e9c96
is a syscall iframe.
* User debugger support: Don't to call BreakpointManager::PrepareToContinue(),
if the thread returns from a syscall. We don't want to skip breakpoints in
that case.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31223 a95241bf-73f2-0310-859d-f6bbb57e9c96
* The bulk of the work -- i.e. juggling the software and hardware breakpoints,
watchpoints, and memory reads/writes -- is done in the new class
BreakpointManager.
* For the architectures a few capability macros have to be defined, one
pointing to the software breakpoint instruction opcode. Done for x86.
* Some more simplifications in the user debugger code, made possible by the
recently introduced debugger_changed_condition attribute.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31214 a95241bf-73f2-0310-859d-f6bbb57e9c96
installed team debugger and adjusted the code accordingly. It's not needed yet,
but I intend to add support for software breakpoints and those require a bit of
uninitialization that needs to be synchronized with debugger changes and can't
be done with interrupts disabled.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31194 a95241bf-73f2-0310-859d-f6bbb57e9c96
and added a _kern_unreserve_address_range() as well.
* The runtime loader now reserves the space needed for all its areas first
to make sure there is enough space left for all areas of a single image.
* This also fixes the final part of bug #4008.
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31115 a95241bf-73f2-0310-859d-f6bbb57e9c96
the first part of making the runtime loader behave itself; it should already
make Clockwerk run okay with any number of translators (even if not all of
them will work yet).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31113 a95241bf-73f2-0310-859d-f6bbb57e9c96
* It was broken since the support for debugger handovers. Using
debugger_write() couldn't work, since the thread didn't belong to the
debugged team anymore (but to the kernel) and thus getting the debug info
for team would always fail. This makes B_DEBUGGER_MESSAGE_THREAD_DELETED
notifications work again.
* Allow the thread to block. Locking/writing to the port was non-blocking
before, but there shouldn't be a problem, if the thread has to wait.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31076 a95241bf-73f2-0310-859d-f6bbb57e9c96
stopped. Besides that the message won't be interesting to the other threads
anyway, we also risk filling the port and blocking the nub thread.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31075 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Generalized address checks. The debugger can now also read the commpage.
* Added new syscall _kern_get_thread_cpu_state() to get the CPU state of a
not running thread. Introduced arch_get_thread_debug_cpu_state() for that
purpose, which is only implemented for x86 ATM (uses the new
i386_get_thread_user_iframe()).
* Don't allow a debugger to change a thread's "esp" anymore. That's the esp
register in the kernel. "user_esp" can still be changed.
* Generally set RF (resume flag) in eflags in interrupt handlers, not only
after a instruction breakpoint debug exception. This should prevent
breakpoints from being triggered more than once (e.g. when the breakpoint is
on an instruction that can cause a page fault). I still saw those with bdb
in VMware, but that might be a VMware bug.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31045 a95241bf-73f2-0310-859d-f6bbb57e9c96
first run only set up uncacheable MTRRs and in the second run set the write-back
ones up. If this order is not followed, we could set too large ranges to
cacheable first and then limit it back to uncacheable later. On systems with
enough physical memory this would lead to a temporary situation in which areas
become cacheable that must not be, resulting in system hangs or other unexpected
behaviour. Fixes last part of #4018.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31027 a95241bf-73f2-0310-859d-f6bbb57e9c96
boot device is actually read-only (even if it's using the write overlay).
* Do not create a swap file on a read-only device - this would really be a
stupid use of the write overlay (just saw this happening on an older
machine).
* Made swap_file_{add|delete}() take a const char* path - there was no reason
this was writable, and this also avoids casting away the const when adding
the default swap file.
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30975 a95241bf-73f2-0310-859d-f6bbb57e9c96
only one of its partitions went away. This should fix#3983.
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30961 a95241bf-73f2-0310-859d-f6bbb57e9c96
also mess up the file map, causing all sorts of file corruption.
* This fixes bug #3991 (and eventually some others).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30960 a95241bf-73f2-0310-859d-f6bbb57e9c96
demangler, where it belongs. The gcc 4 stack traces look correct now.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30955 a95241bf-73f2-0310-859d-f6bbb57e9c96
have a simple dedicated heap for the kernel debugger with stacked allocation
pools (deleting a pool frees all memory allocated in it). The heap should
eventually be used for all commands that need temporary storage too large for
the stack instead of each using its own static buffer.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30949 a95241bf-73f2-0310-859d-f6bbb57e9c96
decided to recursively resolve a symlink. We only have to do the resolution
when the flag is true anyway or the symlink is not the last component of
our path, in which case we have to resolve it anyway. Fixes#3986.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30937 a95241bf-73f2-0310-859d-f6bbb57e9c96
- While walking down the cache chain, we keep all upper caches locked.
- When we have to unlock -- when waiting for a busy page or reading a page in
-- we unlock completely, including the address space, and restart
vm_soft_fault().
- Folded fault_get_page() and fault_find_page() into one.
This simplifies and improves things considerably:
- We no longer need dummy pages.
- We no longer need vm_area::no_cache_change.
- #2710 is fixed, since we no longer hold the address space lock while
waiting.
* vm_soft_fault(): When we have found our page, we first check whether a page
is already mapped at the address. If it is already our page, we just change
its protection. If not, we unmap it first. Fixes race conditions when multiple
threads fault at the same address at the same time.
* fault_get_page(): When copying a read-only page from a lower cache, no longer
mark it active, since at least for the fault area it is shadowed from then on.
* vm_set_area_protection(): Fixed potential overflow for in the
vm_translation_map::protect() call.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30911 a95241bf-73f2-0310-859d-f6bbb57e9c96
known those can cause a deadlock. Besides, when the debug server is running,
it prints an even nicer stack trace. Not removing the code yet to make things
easier for architectures on which we don't have a userland yet.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30877 a95241bf-73f2-0310-859d-f6bbb57e9c96
might be different from that of the caller (on hybrid builds).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30858 a95241bf-73f2-0310-859d-f6bbb57e9c96
replaced by timespec fields. Via macros the structure is still source
compatible with the old one.
* Introduced header <compat/sys/stat.h> that defines the old stat structure
(as stat_beos) and conversion functions
* Introduced versions for [l,f]stat().
* Added symbol versions for BDirectory::GetStatFor() for sake of binary
compatibility.
* BStatable::GetStat(): Renamed the old method, changed its parameter to
stat_beos*, and and made it private. Added a new version (using up a
reserved vtable slot). It remains source and binary compatible.
* BRefFilter::Filter(): Changed the struct stat* parameter to struct stat_beos*
for sake of binary compatibility. This breaks source compatibility, though,
which we can't help, since the class doesn't have reserved vtable slots.
* Fixed several issues with the stat structure change, mostly adjusted uses of
BRefFilter.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30830 a95241bf-73f2-0310-859d-f6bbb57e9c96
and the signal stack must be copied into the new thread (at least that's
what I could make of IEEE Std 1003.1-2001 regarding the expected behaviour
of fork)
This brings down the failures of the rsync test suite from 24 to 18 ...
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30807 a95241bf-73f2-0310-859d-f6bbb57e9c96
allowing optional prepending of a string to the symbol names.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30750 a95241bf-73f2-0310-859d-f6bbb57e9c96
and the kernel read those values from the shared object (if available). In the
runtime loader this should eventually replace the gcc version guessing method
currently used (at least for shared objects built for Haiku). The optional
packages need to be rebuilt first, though.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30729 a95241bf-73f2-0310-859d-f6bbb57e9c96
parent.
* Additionally, when a vnode is deleted, the new BaseDevice::Removed() method is
called that will remove the device from its parent if needed, and delete it
then.
* This should fix#3856.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30726 a95241bf-73f2-0310-859d-f6bbb57e9c96
themselves in busses/ata instead of busses/ide.
* Re-introduce Francois change to install these drivers in busses/ata
when building with HAIKU_ATA_STACK = 1.
* Adopted the device manager to look for drivers in busses/ata
additionally to busses/ide.
This change works fine with a clean installation on a computer where I can
(and indeed have to) use the new ATA stack.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30695 a95241bf-73f2-0310-859d-f6bbb57e9c96
rootfs_find_in_dir() was wrong, leading to never be able to find the fromName
in the directory. Furthermore, the parent of the root directory is itself, but
the check to see whether or not the target is valid did not take this into
account, and therefore ran into an endless loop. This fixes bug #3864.
* Rearranged rootfs_rename() to be clearer.
* Style cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30633 a95241bf-73f2-0310-859d-f6bbb57e9c96
it anymore after having called vfs_asynchronous_read_pages().
* Now, Prepare() does all the preparation work, and ReadAsync() does the actual
work - this must be called without having the cache locked. This also fixes
another bug where the callback would be deleted twice in case the I/O request
failed.
* This fixes bug #3847.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30632 a95241bf-73f2-0310-859d-f6bbb57e9c96
Theoretically, not doing that could have caused still mapped pages to get
into the free queue. This could have been a cause of #3110, but the reported
circumstances don't look quite fitting.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30605 a95241bf-73f2-0310-859d-f6bbb57e9c96
again, or else the port loses capacity.
* This fixes bug #2720.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30517 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Did claim to have reserved pages when calling vm_page_allocate_page(), but
didn't have any (copy&paste bug). We cannot use it without reserved pages,
as we need to call vm_page_allocate_page() with a cache locked.
* No longer use low_resource_state() to determine whether to precache or not,
but use the new vm_page_num_used_pages() instead.
* Also don't (try to) precache when the cache already has more than 2/3 of its
pages to safe some unnecessary work.
* The size to precache was limited to the file size incorrectly.
* When precaching failed, the cache reference was not released.
* The precaching started one page too late, causing bug #3835.
* Reenabled precaching.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30515 a95241bf-73f2-0310-859d-f6bbb57e9c96
with vm_cache_acquire_locked_page_cache().
* Added new function vm_page_num_unused_pages() which returns the pages that are
actually completely free and unused.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30514 a95241bf-73f2-0310-859d-f6bbb57e9c96
* vfs_read_pages_async() must not be called with locked cache,
since it cannot be guaranteed that the operation will be
performed asynchronously. (The ISO9660 FS for example does not
implement the new IO hooks... yet.)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30476 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Implemented a way to do asynchronous pre-fetching when mapping files.
* There are slight code duplications in some places that could benefit
from cleaning up, but nothing too bad.
* Implementing smarter ways to trigger prefetching and more analysis of
the situations in the kernel would be nice. Currently up to 10 MB
of every mapped file are pre-fetched without further analysis.
* The speed improvement is nice for certain operations. On our test
system (real hardware), Firefox took 9 seconds from being launched
to display a window. Now it takes 5 seconds. Both measurements
right after booting. The same system took 35 seconds from launching
Haiku in the GRUB menu to displaying the Tracker desktop background
image. Now it takes 27 seconds.
* We didn't have the chance to check out the effects of this on the
CD boot, but potentially, they could speed it up a lot.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30465 a95241bf-73f2-0310-859d-f6bbb57e9c96
objects we're going to add, so we get less slot collisions.
* Use the "Unchecked" versions of the OpenHashTable Insert()/Remove() methods,
since we have interrupts disabled.
* Fixed wrong check that caused the wait object info events not to be filled in.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30384 a95241bf-73f2-0310-859d-f6bbb57e9c96
- Moved scheduler listening interface to <listeners.h> and added more
convenient to use templatized notification functions.
- Added a listener mechanism for the wait objects (semaphores, condition
variables, mutex, rw_lock).
* system profiler:
- Hopefully fixed locking issues related to notifying the profiler thread
for good. We still had an inconsistent locking order, since the scheduler
notification callbacks are invoked with the thread lock held and have to
acquire the object lock then, while the other callbacks acquired the object
lock first and as a side effect of ConditionVariable::NotifyOne() acquired
the thread lock. Now we make sure the object lock is the innermost lock.
- Track the number of dropped events due to a full buffer.
_user_system_profiler_next_buffer() returns this count now.
- When scheduling profiling events are requested also listen to wait objects
and generate the respective profiling events. We send those events lazily
and cache the infos to avoid resending an event for the same wait object.
- When starting profiling we do now generate "thread scheduled" events for
the already running threads.
- _user_system_profiler_start(): Check whether the parameters pointer is a
userland address at all.
- The system_profiler_team_added event does now also contain the team's name.
* Added a sem_get_name_unsafe() returning a semaphore's name. It is "unsafe",
since the caller has to ensure that the semaphore exists and continues to
exist as long as the returned name is used.
* Adjusted the "profile" and "scheduling_recorder" according to the system
profiling changes. The latter prints the number of dropped events, now.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30345 a95241bf-73f2-0310-859d-f6bbb57e9c96
potentially want to notify the profiler thread (i.e. wake it up), which can
cause another scheduling event notification. That is we have to make sure that
event buffer is in a consistent state at that point (i.e. wake up the thread
at the very end of the callbacks). Furthermore the ThreadEnqueuedInRunQueue()
callback can be called with spinlocks besides the thread spinlock being held. In
particular waking up threads also happens in the condition variable code with
a static spinlock being held. Trying to notify the condition variable the
profiler thread is waiting on in such a case would be a guaranteed deadlock.
Hence we avoid doing that, now.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30339 a95241bf-73f2-0310-859d-f6bbb57e9c96
manipulating the queue is a particularly unsuitable place for calling the
listeners, as they wouldn't be allowed to e.g. unblock threads, since that
would screw the run queue.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30338 a95241bf-73f2-0310-859d-f6bbb57e9c96
will return consistent values. This helps with debug measurements for the time
being. Obviously we'll have to think of something different when we support
speed-stepping on models with frequency-dependent TSCs.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30287 a95241bf-73f2-0310-859d-f6bbb57e9c96
theoretically write the given page.
* page writer: Fixed the incorrect check whether a temporary page can be
written by using the new CanWritePage().
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30281 a95241bf-73f2-0310-859d-f6bbb57e9c96
* The previous code would have scheduled a single page to be written out (if it
would have ever been triggered), now we schedule the complete previous write
access. This greatly speeds up a "dd if=/dev/zero of=test ..." beyond the
size of available memory.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30276 a95241bf-73f2-0310-859d-f6bbb57e9c96
passed in a structure now, so it is easier to extend it and ignore unused
parameters.
* One can now select which system profiling events one is interested in.
* Added scheduling events to the system profiling interface. Those are pretty
much the ones recorded when scheduler tracing is enabled. Still missing are
the "wait object" events that allow to interpret what a thread is waiting
for.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30243 a95241bf-73f2-0310-859d-f6bbb57e9c96
* When writing a page failed it is not a good idea to re-enqueue it at the tail
of the modified queue, since that is definitely behind the page writer's
marker and the page would be picked up again before reaching the end of the
queue. If that happened with more than 256 pages, the page writer would keep
picking up only those non-writable pages and make no more progress.
* When selecting pages also skip temporary pages, if there's no more swap space
available, since trying to write those pages would most likely fail anyway
(triggering the first problem).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30230 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added "step" debugger command to single-step to the next instruction (of the
topmost iframe).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30212 a95241bf-73f2-0310-859d-f6bbb57e9c96
continue kernel breakpoints -- we would just retrigger the breakpoint when
continuing before.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30210 a95241bf-73f2-0310-859d-f6bbb57e9c96
re-entered it fast enough, we wouldn't leave the loop and thus cause a
deadlock, since we wouldn't process the ICI message telling us to halt. We do
now call smp_intercpu_int_handler() in the loop and guard the function from
being re-entered. This also has the advantage that we can execute code on all
CPUs in the kernel debugger, if we have to.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30208 a95241bf-73f2-0310-859d-f6bbb57e9c96
enter/exit code. There's no real reason not to keep kernel breakpoints
enabled when in userland (unless there are breakpoints installed for the
team, of course).
* Enabled kernel breakpoints by default (check your kernel_debug_config.h,
if you have overridden it!), since they don't really add any overhead
anymore.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30206 a95241bf-73f2-0310-859d-f6bbb57e9c96
pointed out, there is also an unsolvable race condition with BFS that other
file systems should share.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30204 a95241bf-73f2-0310-859d-f6bbb57e9c96
unload the network stack. This now works again, although I didn't manage to
do it without another lock.
* Cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30196 a95241bf-73f2-0310-859d-f6bbb57e9c96
profiling events.
* profile: Avoid using get_{team,thread}_info() in common code paths. The
system profiling mode is asynchronous, so the team or thread in question
could already be gone.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30193 a95241bf-73f2-0310-859d-f6bbb57e9c96
methods that used an "event mask" field. There was no need to introduce
a "flags" field for the same purpose.
* Renamed protected DefaultNotificationService methods (removed "_" prefix).
* Adjusted the code providing a notification service accordingly.
* Changed the event message several notification services generated by renaming
the "opcode" field to "event".
* Implemented the TEAM_ADDED event and also added a TEAM_EXEC event.
* Added notifications for threads and images.
* Added visitor-like iteration functions for teams, threads, and images.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30126 a95241bf-73f2-0310-859d-f6bbb57e9c96
data. This is available when BLOCK_CACHE_BLOCK_TRACING is 2 or greater.
* Completely untested as of now, though. Will do so soon.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30104 a95241bf-73f2-0310-859d-f6bbb57e9c96
documentation the segment offsets it shall return are relative to the
address specified in the program header.
* Added "qSupported".
* Added the mandatory commands and some additional ones. Partially implemented
only.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30038 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Fixed the read with bounce buffer case. When skipping a partial bounce
buffer before the part we're interested in, we forgot to update "offset".
* Added some more comments for readability.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29999 a95241bf-73f2-0310-859d-f6bbb57e9c96
better, though :-)
* Also fixed a mixup of the unintuitive argument order of our
atomic_test_and_set(); I guess I will change that sooner or later.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29994 a95241bf-73f2-0310-859d-f6bbb57e9c96
page failed since the cache has been shrunk, we need not only remove the
page from the cache, we also need to remove all of its area mappings and
free it. Not removing the area mappings might have been the cause of #3110,
not freeing it would cause it to be leaked for good.
* vm_page_write_modified_page_range(): When writing failed for another reason
and the page wasn't in the modified queue before, we would lose the info
in which queue it was before and setting the page state to modified would
assume the active queue. This could potentially screw up our page queue
structures.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29992 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Renamed DoublyLinkedList::Size() to Count(), since it actually counts the
items (ie. O(n)).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29979 a95241bf-73f2-0310-859d-f6bbb57e9c96
* optimized unmapping of a single page that was rather inefficient
for large areas
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29978 a95241bf-73f2-0310-859d-f6bbb57e9c96
most importantly input_server, which then closes the drivers for input devices.
This in turn will do some cleanup. The touch pad driver will then be reset to
act as normal PS/2 mouse, so that OS like BeOS can use it again.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29948 a95241bf-73f2-0310-859d-f6bbb57e9c96
* We started the "main2" thread too late. Since the scheduler was already
started on all CPUs, the idle thread could wait (for a mutex) while
spawing the "main2" thread. This violated the assumption in the scheduler
that all idle threads would always be ready or running. We now create the
thread while the kernel runs still single-threaded.
* scheduler_start() is now invoked with interrupts still disabled. We enable
them after the function returns. This prevents scheduler_reschedule() from
potentially being invoked before scheduler_start().
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29914 a95241bf-73f2-0310-859d-f6bbb57e9c96
Don't really resume the undertaker thread after creating it, since at that
point the scheduler has not been started yet. Didn't do any harm, since it was
only the second thread anyway and the idle thread was rescheduled almost
immediately.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29908 a95241bf-73f2-0310-859d-f6bbb57e9c96
Check gKernelStartup to avoid sending ICI when entering the kernel debugger
(after ICI is enabled). Moreover it's more obvious than to use that instead
of relying on ICIs not being enabled.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29907 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Made the TimeZoneView less error prone, and also actually use Haiku code (the
previous check didn't work since it used #if, not #ifdef).
* Also took the liberty to rename our boot loader to haiku_loader, since I had
to update the nasm binary anyway. Updated the assembly sources to nasm 2.0.
* I haven't found where the synth location in the MIDI code is specified,
though.
* Also, NetBootArchive, and FloppyBootImage haven't been updated yet. Will do
so next.
* Some optional packages still put their license to beos/etc/licenses. I didn't
update them yet, as we'll probably do so anyway at some point. Also, I think
we might want to introduce a common/data/licenses instead for those.
* If you encounter any problems, please tell!
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29876 a95241bf-73f2-0310-859d-f6bbb57e9c96
(mostly at least). Also disables -Werror for the binutils, but those should
be fixed eventually.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29804 a95241bf-73f2-0310-859d-f6bbb57e9c96
spinlock for a long time. That should help to analyze system "freezes"
involving spinlocks. In VMware on a Core 2 Duo 2.2 GHz the panic() is
triggered after 20-30 seconds. The time will be shorter on faster machines.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29732 a95241bf-73f2-0310-859d-f6bbb57e9c96
newly created dir. The VFS really doesn't need it and for some file systems
it might not be easy to get by. Several file systems (e.g. rootfs and fat)
were ignoring the parameter anyway.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29719 a95241bf-73f2-0310-859d-f6bbb57e9c96
1) We now maintain a runqueue per CPU, rather than a single global shared queue. Idle threads are segregated into their own queue for simplicity.
2) Enqueueing threads is now somewhat more intelligent - if the thread is pinned, it is always enqueued onto that core. Otherwise we enqueue it on whichever CPU it previously ran, unless it either hasn't run before, or that core has been disabled via ProcessController. If so, we try to enqueue it on whichever core has been the most idle recently.
3) The above allow various simplifications to thread scheduling. Pinned threads and/or disabled cores are now no longer special cases that need to be dealt with. If a CPU has no threads ready, it looks for another one to steal a thread from, though that part still needs some tuning along with enqueueing for load balancing purposes.
The chief aim here is better load balancing and support for soft affinity. However, at the moment the overall behavior still exhibits some regressions compared to the old scheduler, so it's disabled by default. If you wish to experiment/debug with it, instructions for enabling it can be found in scheduler.cpp. Much thanks to Ingo, Axel and everyone who's helped with either code review/advice or testing so far.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29643 a95241bf-73f2-0310-859d-f6bbb57e9c96
are still allowed to delete semaphores of other teams...
* Anyway, this fixes bug #3585.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29621 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Use atomic_or() to update sig_pending of the main thread.
* We didn't call update_thread_signals_flag() for the main thread, so its
handle_signals() wouldn't be called, resulting in an infinite loop, if this
signal interrupted a restartable syscall. Calling exit() from another thread
than the main thread was likely to run into this problem. Should fix#3178.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29612 a95241bf-73f2-0310-859d-f6bbb57e9c96
it was done in SAS/C... (yeah, that was ages ago). This fixes bug #2030.
* Also, we should probably check if the area we're about to shrink/remove
actually is a reserved area.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29605 a95241bf-73f2-0310-859d-f6bbb57e9c96
to manage this, avoid locking the main sLock in notification handling methods. Instead fill up two lists which will be emptied later by the kernel daemon thread.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29603 a95241bf-73f2-0310-859d-f6bbb57e9c96
device additions/removals can be monitored.
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29582 a95241bf-73f2-0310-859d-f6bbb57e9c96
makes them more convenient to use, since the caller doesn't need to know the
target threads' user thread structure.
* Adjusted the pthread rwlock implementation accordingly.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29578 a95241bf-73f2-0310-859d-f6bbb57e9c96
the free list. Do that with the threads lock held. This allows other threads
to freely access a thread's user thread structure while holding the threads
lock.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29577 a95241bf-73f2-0310-859d-f6bbb57e9c96
implementations that can be used by subsystems that want to have a pretty
standard service. Only the latter is really complete, though.
* The notification manager is now available earlier in the boot process.
* Added notifications to teams/ports (only add/remove).
* The network notification implementation is now using the
DefaultUserNotificationService.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29543 a95241bf-73f2-0310-859d-f6bbb57e9c96
can be checked.
* Make the usb_keyboard module check the presence of the needed debugger
commands to avoid the error messages in case of them being unavailable.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29472 a95241bf-73f2-0310-859d-f6bbb57e9c96
IORequest.{h,cpp}.
* Introduced public <io_requests.h> header. Currently it only declares the
single function BFS uses.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29446 a95241bf-73f2-0310-859d-f6bbb57e9c96
1) When searching the area for a place to allocate the next command, the case of the first command being the same as the last command (as is the case after adding the first message) was not correctly considered. This prevented a given area from ever containing more than one command.
2) The size of a command was incorrectly word-aligned. Rather than aligning to 32-bit boundaries, the size was truncated to between 1-3 bytes, leading to command corruption once multiple messages were in the area, eventually causing registrar to crash while retrieving the messages.
Combined these two changes result in us no longer constantly allocating/destroying areas during heavy node monitor activity.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29417 a95241bf-73f2-0310-859d-f6bbb57e9c96
could have caused a number of problems.
* Fixed coding style violation Ingo introduced.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29378 a95241bf-73f2-0310-859d-f6bbb57e9c96
* The I/O context related vfs_*() functions have io_context* instead of void*
parameters/return values, now.
* vfs_new_io_context(): Lock the parent I/O context before getting its table
size. Otherwise the table size could change until we do.
* vfs_resize_fd_table(): Fixed use of MutexLocker. We created only a temporary
object, not one with function scope.
* Renamed load_image_etc() to load_image_internal() and added a parameter for
specifying the parent team of the one to create.
* Introduced a kernel private load_image_etc() with a few more arguments than
load_image().
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29375 a95241bf-73f2-0310-859d-f6bbb57e9c96
many unclear bytes remained instead of how many were cleared. This caused
sparse files to show garbage instead of empty space. This fixes bug #2889.
* common_file_io_vec_pages() set "size" (size_t) from file_io_vecs::length
which is off_t without taking into account that important information could
be lost.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29339 a95241bf-73f2-0310-859d-f6bbb57e9c96
stored now.
* Extended the debugger message for B_DEBUGGER_MESSAGE_HANDED_OVER by the
causing thread.
* Also send B_DEBUGGER_MESSAGE_HANDED_OVER to the debugger to which the team
was handed over. The message will be the very first one the debugger gets
from the team in question.
* Some harmless refactoring (added thread_hit_serious_debug_event()).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29302 a95241bf-73f2-0310-859d-f6bbb57e9c96
otherwise a "rmdir ./" would still have caused the corruption.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29299 a95241bf-73f2-0310-859d-f6bbb57e9c96
to be in line with what other systems do as well. Also fixes bug #3476.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29296 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added debugger commands to resolve usb_ids to pipes.
* Adjusted the physical memory allocator to be usable in a slimmed down mode
when running inside the kernel debugger.
* Implemented USB keyboard support for KDL through a kernel debugger add-on.
* Added kgetc() and made use of it where previously individual methods were used
to ensure that reading characters always goes through the kernel debugger
add-ons and the other methods.
This has some preconditions to meet though:
1) The keyboard must be in the boot protocol (currently the case but needs to
be revisited once we have a full usb_hid).
2) The keyboard must be attached to a UHCI root port (i.e. not use EHCI or OHCI,
also not through hubs unless those are USB 1.1).
3) the usb_hid driver has to be opened for this to work. This means that for the
time between initializing USB and when usb_hid is opened by the input_server
there is no keyboard support.
Also note that this has no way of detecting hot-plug, meaning that you can't
re-attach your USB keyboard from the hub to the root port once in KDL.
On the bright side of things, since this is a non-destructive mechanism it is
possible to enter and leave KDL without loosing the USB state.
Tested OK in QEMU, not tested on real hardware yet, will see in a few minutes.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29291 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Add attribute_overlay and write_overlay to the image/floppy instead.
* Mount a iso9660 boot volume with both write and attribute overlay for now.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29261 a95241bf-73f2-0310-859d-f6bbb57e9c96
needed at all when used as intended. Thanks Ingo for the explanation on how this
is intended to work. Adjusted the overlay fs accordingly and updated/reverted
the changes to the other filesystems.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29250 a95241bf-73f2-0310-859d-f6bbb57e9c96
been mounted. This is to allow layered filesystems to setup internal data that
requires all the sub/super volumes to be available.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29248 a95241bf-73f2-0310-859d-f6bbb57e9c96
It causes the interrupt handler to be inserted at the very end of the list
instead of at the top. It is intended to be used as a workaround when a
interrupt handler cannot know if it actually handled the interrupt. This
should never be used by native drivers. Also if we know that the result is
not valid because of this flag we won't disable the vector in case we count
many unhandled interrupts as those numbers are then unreliable.
* Moved B_NO_LOCK_VECTOR to be a private flag as well.
* Made the interrupt handler list a simple manually maintaned singly linked list
instead of the doubly linked one used with insque and remque as it greatly
simplifies things for such an easy use case and is more compact.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29241 a95241bf-73f2-0310-859d-f6bbb57e9c96
* When booting from an iso, mount the boot volume with the overlay layer.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29202 a95241bf-73f2-0310-859d-f6bbb57e9c96
additional layer by supplying "-t <actualFileSystem>:overlay" to a mount command.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29201 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Remove the previous method of applying the overlay by flags. In the future the
overlay can just be mounted as a filesystem layer. This is probably how layers
were intended to work in the first place.
* Move the filesystem module info and filesystem name from the fs_mount to the
fs_volume structure. Filesystem layering is done by having multiple layered
volumes and we want to be able to have a different fs per layer.
* Adapt VFS code to this move.
* Implement mounting layered filesystems. Specifying multiple filesystems
separated by a colon on mount will cause the layers to be set up and the
corresponding filesystems to be mounted at that layer.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29199 a95241bf-73f2-0310-859d-f6bbb57e9c96
node. That is needed for a layered filesystem to be able to construct a full
fs_vnode out of a volume/inode pair.
* Adapt places where get_vnode is used. Sadly this is a C API and we can't just
use a default NULL for that argument.
* Introduce a flag B_VNODE_WANTS_OVERLAY_SUB_NODE that can be returned in the
flags field of a fs get_vnode call. A filesystem can use this flag to indicate
that it doesn't support the full set of fs features (attributes, write support)
and it'd like to have unsupported calls emulated by an overlay sub node.
* Add a perliminary overlay filesystem that emulates file attributes using files
on a filesystem where attributes aren't supported. It does currently only
support reading attributes/attribute directories though. All other calls are
just passed through to the super filesystem.
* Adjust places where a HAS_FS_CALL() is taken as a guarantee that the operation
is supported. For the overlay filesystem we may later return a B_UNSUPPORTED,
so make sure that in that case proper fallback options are taken.
* Make the iso9660 filesystem request overlay sub nodes. This can be fine tuned
later to only trigger where there are features on a CD that need emulation
at all.
If you happened to know the attribute file format and location you could build
an iso with read-only attribute support now. Note that this won't be enough to
get a bootable iso-only image as the query and index support is yet missing.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29177 a95241bf-73f2-0310-859d-f6bbb57e9c96
add the const in any case. As Axel points out these are C functions and we do
not affect binary compatibility by changing their signature.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29124 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Replaced the use of offsetof() for structs that aren't PODs. Add a
offset_of_member() macro to util/khash.h because that's what it's used for
in our cases.
* Change the signature of add_debugger_command()/remove_debugger_command() on
GCC > 2 to avoid the depricated conversion from string constants to char *.
* Adding some "suggested" parenthesis. I know that not everyone likes that, but
it pointed out at least one bug that is fixed here as well.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29113 a95241bf-73f2-0310-859d-f6bbb57e9c96
* this fixes the use of SSE instructions here on a dual core.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29051 a95241bf-73f2-0310-859d-f6bbb57e9c96
get multiple definitions of them when building with GCC4 on a GCC4 host.
With that we can now build completely on a GCC4 host with native GCC 4.3.3.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29020 a95241bf-73f2-0310-859d-f6bbb57e9c96
to sAPMBiosEntry generates undefined symbols and I'm not in a condition to fix
this right now. Added a TODO.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28986 a95241bf-73f2-0310-859d-f6bbb57e9c96
won't call put_mount() before they are freed. Internally, this causes them
to grab a reference to the mount's root vnode.
* This fixes bug #3262.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28850 a95241bf-73f2-0310-859d-f6bbb57e9c96
#2919 (OMG :-)).
* While I was at it, I also cleaned up some style inconsistencies.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28842 a95241bf-73f2-0310-859d-f6bbb57e9c96
and colors for the on-screen debug output when leaving KDL. Thanks, Adrian!
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28841 a95241bf-73f2-0310-859d-f6bbb57e9c96
* UpdateUserListener() did not delete the copiedListener in case adding the
monitor listener failed.
* RemoveListener() did never delete UserNodeListeners, IOW user node monitors
were never freed!
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28787 a95241bf-73f2-0310-859d-f6bbb57e9c96
will now accepted and regarded as sparse file data. FileMap::_Add() also
correctly joins multiple vecs with that offset together, FileMap::Translate()
will always report offset -1 even for offsets into that extent.
* read_file_io_vec_pages() (or rather, its backend common_file_io_vec_pages())
now supports sparse files, and will just clear the memory it should read from
offset -1 instead of passing a request to the vnode.
* ext2 now correctly reports sparse files. This should close bug #2889, as well
as #975.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28648 a95241bf-73f2-0310-859d-f6bbb57e9c96
memory to free was empty, but didn't check the list with objects to
delete. So those were queued until someone used deferred_free().
Should fix#3128.
* Run the daemon once a second instead of every five seconds, so memory
is recycled a little quicker.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28644 a95241bf-73f2-0310-859d-f6bbb57e9c96
the fixes applied to the kernel version of it (most notably a correctly
working block_cache_discard(), and cache_detach_sub_transaction()).
Also switched to the new notification functions, even though it still works
synchronously in the fs_shell.
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28617 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Whatever is the cause of #2733, this should at least not make it crash.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28615 a95241bf-73f2-0310-859d-f6bbb57e9c96
generic page mapping mechanism. This should fix#2902 (will test in a minute).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28584 a95241bf-73f2-0310-859d-f6bbb57e9c96
lock held - that was a relict of the past.
* This fixes bug #2535.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28551 a95241bf-73f2-0310-859d-f6bbb57e9c96
bug #3082.
* Also, it now allows to remove daemons in their hook function.
* Added a "daemons" KDL command that dumps all registered kernel daemons, and
resource resizers.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28550 a95241bf-73f2-0310-859d-f6bbb57e9c96
as public defines. They are now called THREAD_{MIN|MAX}_SET_PRIORITY to
better reflect what they are for. Minimum priority is now 1, ie. you no
longer can set another thread to the idle priority. This fixes part of
ticket #2959.
* set_thread_priority() will no longer allow to change the priority of the
idle thread to something else. This fixes the rest of ticket #2959.
* Automatic whitespace cleanup in OS.h.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28521 a95241bf-73f2-0310-859d-f6bbb57e9c96
in the cache is the same as in the condition variable. It now uses the
low-contention sCachesLock to accomplish this.
* Also added an ASSERT to make sure the notification is no longer part of the
list at this point.
* Improved KDL command output.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28516 a95241bf-73f2-0310-859d-f6bbb57e9c96
discarded blocks correctly as well.
* cache_detach_sub_transaction() left cached_block::original_data unchanged even
if the parent data was to become current (in case the sub transaction didn't
change the block yet). This could cause outdated blocks to be written back.
* cache_detach_sub_transaction() also set cached_block::previous_transaction
for all blocks, not just the ones with a previous transaction. This could
cause blocks to be written twice for no reason.
* cache_start_sub_transaction() did not change the num_blocks count for
discarded blocks.
* block_cache_discard() now panics if the block was already changed in the
current transaction.
* Improved test application, added more tests, revealing the above bugs in
cache_detach_sub_transaction().
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28514 a95241bf-73f2-0310-859d-f6bbb57e9c96
from the block notifier, the cache could be deleted before we have the chance
to lock it. We now lock the sCachesLock, and see if this cache is still valid.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28512 a95241bf-73f2-0310-859d-f6bbb57e9c96
cache_end_transaction(), and cache_start_sub_transaction()).
* Further work on the test application, it's now actually usable, first test
passes.
* dump_block() did erroneously print 'B' for the dirty flag; now both dirty and
discard have the 'D' (3rd and 5th column).
* block_cache::LowMemoryHandler() is now private (and got an underscore prefix).
* Minor cleanup, shuffled some methods around.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28508 a95241bf-73f2-0310-859d-f6bbb57e9c96
discarding their changes. This functionality currently only works correctly
when no transactions are used.
* Started test application for the block cache, doesn't do anything yet.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28496 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added new(mynothrow) operators which avoid clashes when also linking
against libgcc.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28474 a95241bf-73f2-0310-859d-f6bbb57e9c96
* For 8 bit, the palette is pretty messed up during the boot process
(thanks to the boot loader image), so that we might want to change
how the colors are set then.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28393 a95241bf-73f2-0310-859d-f6bbb57e9c96
print_demangled_call() will now use user_strlcpy() to copy the string
first (if that fails, it will printf '???' to show this).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28386 a95241bf-73f2-0310-859d-f6bbb57e9c96
suggestion by adding a "faults" command that now sets the
gInvokeCommandDirectly variable as wished.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28382 a95241bf-73f2-0310-859d-f6bbb57e9c96
demangle module (yet). This could cause a read fault in x86's
print_demangled_call() (as it assumed there must be a ':' when this is true).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28375 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Fixed some places that set an error return value but didn't actually
return.
* Fixed success case return value. The number of bytes received must be
returned, not B_OK.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28335 a95241bf-73f2-0310-859d-f6bbb57e9c96
stat::st_{dev,ino}.
* stat::st_rdev is unused, but at least initialize it with some
deterministing value. This makes Perl's lib/File/stat.t test happy.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28333 a95241bf-73f2-0310-859d-f6bbb57e9c96
* vm_clone_area() does now set the B_SHARED_AREA flag on both the source
and the cloned area. This is necessary, since it would no longer be
guaranteed that areas are backed by leaf caches only (after
fork()ing), which doesn't work with our cache merging strategy.
Fixes#2605.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28296 a95241bf-73f2-0310-859d-f6bbb57e9c96
This is not necessary, since userland teams' page directories also
contain the kernel mappings, and avoids unnecessary TLB flushes. To make
that possible the vm_translation_map_arch_info objects are reference
counted now.
This optimization reduces the kernel time of the Haiku build on my
machine with SMP disabled a few percent, but interestingly the total
time decreases only marginally. Haven't tested with SMP yet, but for
full impact CPU affinity would be needed.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28287 a95241bf-73f2-0310-859d-f6bbb57e9c96
that dprintf_no_syslog() can avoid sending something to the syslog.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28286 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added deferred_delete() that takes a DeferredDeletable and deletes it
asynchronously.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28285 a95241bf-73f2-0310-859d-f6bbb57e9c96
the <DROP> marker at the place data was dropped, not somewhere else. See
ticket #156; this might already fix this bug.
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28278 a95241bf-73f2-0310-859d-f6bbb57e9c96
scheduler_set_thread_priority(). Setting the thread priority was the
only situation in which it was used.
* Renamed scheduler.cpp to scheduler_simple.cpp.
* The scheduler functions are no longer called directly. Instead there's
an operation vector now, which is initialized at kernel init time.
This allows for picking the most suitable scheduler for the machine
(e.g. a non-SMP scheduler on a non-SMP machine).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28262 a95241bf-73f2-0310-859d-f6bbb57e9c96
scheduler tracing and scheduler analysis code into separate source
files.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28253 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Turned the checks for all those macros to "#if"s instead of "#ifdef"s.
* Introduced macro KDEBUG_LEVEL which serves as a master setting.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28248 a95241bf-73f2-0310-859d-f6bbb57e9c96
index into the sLastCaller array is vint32, so after overflowing the
modulo operation would yield negative indices. This would cause the
256 bytes before the array to be overwritten. Might also be the cause of
#2866.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28245 a95241bf-73f2-0310-859d-f6bbb57e9c96
added vm_memcpy_from_physical() and vm_memcpy_physical_page(), and
added respective functions to the vm_translation_map operations. The
architecture specific implementation can now decide how to implement
them most efficiently. Added generic implementations that can be used,
though.
* Changed vm_{get,put}_physical_page(). The former no longer accepts
flags (the only flag PHYSICAL_PAGE_DONT_WAIT wasn't needed anymore).
Instead it returns an implementation-specific handle that has to be
passed to the latter. Added vm_{get,put}_physical_page_current_cpu()
and *_debug() variants, that work only for the current CPU,
respectively when in the kernel debugger. Also adjusted the
vm_translation_map operations accordingly.
* Made consequent use of the physical memory operations in the source
tree.
* Also adjusted the m68k and ppc implementations with respect to the
vm_translation_map operation changes, but they are probably broken,
nevertheless.
* For x86 the generic physical page mapper isn't used anymore. It is
suboptimal in any case. For systems with small memory it is too much
overhead, since one can just map the complete physical memory (that's
not done yet, though). For systems with large memory it counteracts
the VM strategy to reuse the least recently used pages. Since those
pages will most likely not be mapped by the page mapper anymore, it
will keep remapping chunks. This was also the reason why building
Haiku in Haiku was significantly faster with only 256 MB RAM (since
that much could be kept mapped all the time).
Now we're using a different strategy: We have small pools of virtual
page slots per CPU that are used for the physical page operations
(memset_physical(), memcpy_*_physical()) with CPU-pinned thread.
Furthermore we have four slots per translation map, which are used to
map page tables.
These changes speed up the Haiku image build in Haiku significantly. On
my Core2 Duo 2.2 GHz 2 GB machine about 40% to 20 min 40 s (KDEBUG
disabled, block cache debug disabled). Still more than factor 3 slower
than FreeBSD and Linux, though.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28244 a95241bf-73f2-0310-859d-f6bbb57e9c96
delete. Therefore the constructor/destructor of the contained EntryCache is also
called. The manual call of the destructor to the OpenHashTable inside the
EntryCache was therefore superflous and the destructor would be called twice,
leading to bug #2869.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28232 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Introduced flag "invoke_scheduler" in the per CPU structure. It is
evaluated in hardware_interrupt() (x86 only ATM).
* Introduced SMP_MSG_RESCHEDULE_IF_IDLE message, which enters the
scheduler when the CPU currently runs an idle thread.
* Don't do dprintf() "CPU x halted!" when handling a SMP_MSG_CPU_HALT
ICI message. It uses nested spinlocks and could thus potentially
deadlock itself (acquire_spinlock() processes ICI messages, so it
could already hold one of the locks). This is a pretty likely scenario
on machines with more than two CPUs, but is also possible when the
panic()ing thread holds the threads spinlock. Probably fixes#2572.
* Reworked the way the kernel debugger is entered and added a "cpu"
command that allows switching the CPU once in KDL. It is thus possible
to get a stack trace of the thread not on the panic()ing CPU.
* When a thread is added to the run queue, we do now check, if another
CPU is idle and ask it to reschedule, if it is. Before this change, the
CPU was continuing to idle until the quantum of the idle thread
expired. Speeds up the libbe.so build about 8% on my machine (haven't
tested the full Haiku image build yet).
* When spinlock debugging is enabled (DEBUG_SPINLOCKS) we also record
the spinlock acquirer on non-smp machines. Added "spinlock" debugger
command to get the info.
* Added debugger commands "ici" and "ici_message", printing info on
pending ICI message respectively on a given one.
* Process not only a single ICI message in acquire_spinlock() and other
places, but all pending ones.
* Also process ICI messages when waiting for a free one -- avoids a
potential deadlock.
* Mask out non-existing CPUs in send_multicast_ici(). panic() instead of
just returning when there's no target CPU left.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28223 a95241bf-73f2-0310-859d-f6bbb57e9c96
* "iospace p" should only print the entries for actually existing
memory.
* Fixed output of "iospace v".
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28222 a95241bf-73f2-0310-859d-f6bbb57e9c96
{memset,memcpy_to}_physical() functions.
Mapping lots of physical pages at once as done before was an actual
problem on systems with enough RAM, as the physical page mapper can map
only 64 chunks at a time. So multiple threads could play dining
philosophers, each getting only one of two chopsticks, waiting for
another one to be freed.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28220 a95241bf-73f2-0310-859d-f6bbb57e9c96
the free queue.
* "thread" also prints the thread's I/O priority.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28218 a95241bf-73f2-0310-859d-f6bbb57e9c96
DoublyLinkedListLinkImpl, and fs_mount now uses a DoublyLinkedList instead
of a typeless struct list.
* Also added a constructor/destructor to fs_mount which simplifies and cleans
some code.
* This should not contain any functional changes :-)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28215 a95241bf-73f2-0310-859d-f6bbb57e9c96
* This has the advantage that we no longer need to call get_vnode(), and
instead can use lookup_vnode().
* This means at least most of the "corrupted BFS inode" messages should be
gone; they were produced when fs_sync() tried to get already deleted vnodes.
This was actually harmless, but doesn't really help in trusting your system :-)
* Also, it no longer tries to write back removed vnodes.
* And finally, it now uses a marker vnode when iterating over the list, so
that it doesn't need to break out of the loop anymore, and can always sync
all willing vnodes.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28212 a95241bf-73f2-0310-859d-f6bbb57e9c96
pages have to be written and how tight the memory situation is.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28198 a95241bf-73f2-0310-859d-f6bbb57e9c96
interrupted, another thread closing the other end of the pipe could
invoke thread_unblock() while the first thread already entered
mutex_lock(). This would make the first thread think it successfully
locked the mutex, without removing its (on-stack) wait entry from the
mutex queue, thus leading to crashes.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28195 a95241bf-73f2-0310-859d-f6bbb57e9c96
This fixes a deadlock in SoundPlay that made it freeze when trying to play the 2nd sound.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28179 a95241bf-73f2-0310-859d-f6bbb57e9c96
Don't use the spinlock in arch_debug_serial_puts if we're inside the kernel
debugger. This fixes a tripplefault when faulting with said spinlock held
(due to a NULL string argument for example).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28155 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Add possibility to restart a complete pipe through B_KDEBUG_RESTART_PIPE.
* Implement tail in the kernel debugger making use of the former.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28154 a95241bf-73f2-0310-859d-f6bbb57e9c96
- initialize the time_base_frequency kernel arg (should be done in the bootloader though...). We will use MFP timer to support system_time(). At least try to.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28098 a95241bf-73f2-0310-859d-f6bbb57e9c96
the methods IsFile() and GetFilePath() to BDiskDevice, and
BDiskDeviceRoster::GetFileDeviceForPath().
* Added new syscalls to implement this functionality.
* Added new flag B_DISK_DEVICE_IS_FILE.
* Fixed wrong operator precedence assumption in the BDiskDevice class at
several places.
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28052 a95241bf-73f2-0310-859d-f6bbb57e9c96
- remove dead ppc code
- add support for probing hardware registers the way linux does (early, hook with VBR to trap faults)
- detect MFPs this way.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28031 a95241bf-73f2-0310-859d-f6bbb57e9c96
This confused some USB card readers, that would stop working if you still
requested the geometry when they reported no media.
Note the case that the B_GET_MEDIA_STATUS fails (because it's not implemented or
an error occured) is still handeld in _GetMediaStatus() and then we still try to
get the geometry to check for media presence.
This should fix that some USB card readers wouldn't work and should also remove
the wrongly reported size in DriveSetup for CD drives that don't actually contain
a media.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28029 a95241bf-73f2-0310-859d-f6bbb57e9c96
* The stack_trace() command now also uses this call by default to give you
the arguments to all functions in a stack crawl (beware of templates for now,
though).
* Use the new option '-d' to disable the demangling. You can now also specify
'-d' in the "call" command which has the same meaning there.
* NULL pointers are now printed as "NULL", and NULL strings are printed as
well.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28019 a95241bf-73f2-0310-859d-f6bbb57e9c96
debugger add-on set a demangle hook, all modules under debugger/demangle/ are
now considered demangle modules.
* Added another function to the demangle module interface that gives you access
to the arguments.
* Implemented a demangling module for GCC2.
* The older demangling module is now called "gcc3+", but doesn't support
getting the arguments yet.
* The "call" KDL command is now using demangling to automatically show you
the arguments of a call from a stack crawl.
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28018 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Actually call prepare_sleep_state() instead of calling enter_sleep_state()
twice...
* Commented out disabling interrupts when calling enter_sleep_state(), as our
ACPI modules would then crash (needs memory & uses sems with interrupts
disabled). This way, it at least works on some hardware, including emulators
(as before).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28004 a95241bf-73f2-0310-859d-f6bbb57e9c96
case it has to call the file map translation hook again to fulfill the whole
request; it already handled the partial case correctly.
* This fixes an occasional "Value too large" error when accesssing fragmented
files.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28001 a95241bf-73f2-0310-859d-f6bbb57e9c96
r27530 - allow faults with ints disabled if there is a handler
r27648 - call the end-of-interrupt thread callback
r27718 - add <asm_defs.h>, not used yet
r27722 - register the commpage as image and symbols (but we don't use it yet)
- remove dupped call to thread_get_current_thread()
- use 16MB iospace for now, 4MB seems too small.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27999 a95241bf-73f2-0310-859d-f6bbb57e9c96
PHYSICAL_PAGE_{NO,CAN}_WAIT into an actual flag
PHYSICAL_PAGE_DONT_WAIT.
* Pass the flags through to the chunk mapper callback.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27979 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Use the new VMCache::Read() flags parameter to directly read into the
physical page in the page fault handler instead of mapping it first.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27966 a95241bf-73f2-0310-859d-f6bbb57e9c96
* memset() is now available through the commpage.
* CPU modules can provide a model-optimized memset().
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27952 a95241bf-73f2-0310-859d-f6bbb57e9c96
subdirectories. Also moved the x86 kernel arch_string.S there.
* Moved memcpy.c from src/system/libroot/posix/string into the
arch/generic subdirectory.
* Dealt with the consequences of moving things around. Affected are also
the boot loader and runtime loader builds.
Adjust the m68k and ppc parts, too, but only the x86 build is tested.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27947 a95241bf-73f2-0310-859d-f6bbb57e9c96
- try to accomodate for low ram systems by making the first kernel heap allocation smaller
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27943 a95241bf-73f2-0310-859d-f6bbb57e9c96
