This change moves the common functions related to EFI memory map
to arch/generic for arm, arm64, x86.
riscv64 and x86_64 shall be handled separately as they use some
more architecture-specific logic:
* riscv64 needs special treatment for the M-mode resident code
located at 0x80000000 which is reported as available in the
EFI memory map provided by u-boot.
* x86_64 has a slightly different logic for building the
memory regions list so some additional rework and testing will be
needed before it can be unified with the generic mmu functions.
Change-Id: I430c84dfc693c5b6f04c170dec8ffb1db2c2ace1
Reviewed-on: https://review.haiku-os.org/c/haiku/+/5694
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
a strong monotonicity is a property of system_time(). Performance should be
a bit impacted (around 10%).
removed omit-frame-pointer hints as the compiler generates the same without.
Change-Id: I920145d616604f32b38d9e134ce83f3e0e848bc7
Reviewed-on: https://review.haiku-os.org/c/haiku/+/5690
Reviewed-by: Adrien Destugues <pulkomandy@pulkomandy.tk>
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
- Necessary hooks for reading symlinks are implemented
- Added support for local symlinks
- Added support for extent based symlinks
- This patch completes #17791
Change-Id: If6847974562b21f751097df357326f4643eff757
Reviewed-on: https://review.haiku-os.org/c/haiku/+/5621
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
Reviewed-by: Adrien Destugues <pulkomandy@pulkomandy.tk>
only for Intel newer CPUs.
Change-Id: Icd83f3b643796bfb3725b5c8877b9e7828bc71d9
Reviewed-on: https://review.haiku-os.org/c/haiku/+/5688
Reviewed-by: Adrien Destugues <pulkomandy@pulkomandy.tk>
Reviewed-by: Fredrik Holmqvist <fredrik.holmqvist@gmail.com>
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
only scsi_disk checks the actual value, other drivers take the logical block size.
This change reports the physical block size from the disk rather than the block
size used by IDE/SATA/SCSI commands. On typical modern SATA disks, the SATA
commands will use 512 byte blocks, but the disk will actually read and write
4K blocks internally. This is only of importance for partition alignment for DriveSetup,
and is independant of file systems or partitioning systems. This could also influence
the recommended block size for some file systems.
Change-Id: Id0f2e22659e89fcef64c1f8d04f81cd68995e01f
Reviewed-on: https://review.haiku-os.org/c/haiku/+/5667
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
Reviewed-by: Adrien Destugues <pulkomandy@pulkomandy.tk>
fix f33f4868fe
*_np functions are in a not included header.
add weak aliases for the future functions without _np.
Change-Id: Ie2bcc9173a2b93a6c4052c039cb37930c1c3aaa1
Reviewed-on: https://review.haiku-os.org/c/haiku/+/5685
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
This will give the same result as fs_stat_dev, so the filesystems will
have the same name everywhere.
Change-Id: Ic684142efaeb2c16b393f3f3e5c9c3010a054b30
Reviewed-on: https://review.haiku-os.org/c/haiku/+/5636
Reviewed-by: Jérôme Duval <jerome.duval@gmail.com>
The respective files can be found in the FreeBSD source tree at:
- lib/libstdthreads/call_once.c
- lib/libstdthreads/cnd.c
- lib/libstdthreads/mtx.c
- lib/libstdthreads/threads.h
- lib/libstdthreads/tss.c
Missing is support for PTHREAD_DESTRUCTOR_ITERATIONS.
Change-Id: I7a6c79954f36195eadd1351d308c21a001192232
Reviewed-on: https://review.haiku-os.org/c/haiku/+/5675
Reviewed-by: Fredrik Holmqvist <fredrik.holmqvist@gmail.com>
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
Reported by zuMi, while contributing to the Italian translations. Thanks!
Change-Id: I15e8fc17390188c6d0051384d047ebe06d19a2bc
Reviewed-on: https://review.haiku-os.org/c/haiku/+/5677
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
Reviewed-by: Jérôme Duval <jerome.duval@gmail.com>
Use the EL0 Read-Only Software Thread ID Register aka TPIDRRO_EL0
to store TLS pointer.
The EL0 Read-Only Software Thread ID Register is read-only in User mode
and read/write in privileged modes.
Change-Id: Idea7e3d66cd391dbbe3f9395cb37716089a49e13
Reviewed-on: https://review.haiku-os.org/c/haiku/+/5673
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
Reviewed-by: Fredrik Holmqvist <fredrik.holmqvist@gmail.com>
Reviewed-by: David Karoly <karolyd577@gmail.com>
When change 2966 was merged as hrev56269, it was decided to first introduce
this in libshared instead of libbe.so. The test was moved accordingly, but
not all the code in the unittests was properly updated. This change completes
it.
Note that the test currently crashes, so it needs more investigation whether
that is a test issue or a BMemoryRingIO issue. Fixing this is beyond the
scope of this change.
Change-Id: I0f61d1dd013da904b3e4545db11fefa9da2da0a2
Reviewed-on: https://review.haiku-os.org/c/haiku/+/5676
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
Reviewed-by: Jérôme Duval <jerome.duval@gmail.com>
Global variable gBootGDTDescriptor is used only in function arch_start_kernel()
so we can convert it to a local variable.
Change-Id: I8b6ad2c0903364bdcdcc1039aea6c9c09253fe09
Reviewed-on: https://review.haiku-os.org/c/haiku/+/5663
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
Reviewed-by: David Karoly <karolyd577@gmail.com>
Global variable gBootGDT is used only in function arch_mmu_init_gdt()
so we can convert it to a local variable.
Change-Id: I06174dcd6df4b7bd5136a7e2fabafdc3273f03d3
Reviewed-on: https://review.haiku-os.org/c/haiku/+/5662
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
Reviewed-by: Fredrik Holmqvist <fredrik.holmqvist@gmail.com>
This avoids introducing an entirely custom hook in FUSE.
It uses the ioctl hook in an unconventional way (calling it with no
valid fuse_file_info) but this can be fixed if a filesystem requires it
(by opening a file handle on /, doing the ioctl, then closing again).
An updated version of fusesmb-haiku is available and confirmed working:
https://github.com/haikuarchives/fusesmb-haiku
Change-Id: If1268113874363fa035e5340be75e9f5198216d6
Reviewed-on: https://review.haiku-os.org/c/haiku/+/5199
Reviewed-by: Adrien Destugues <pulkomandy@pulkomandy.tk>
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
these would otherwise trigger an assert when initializing.
fixes#6781
Change-Id: I4fa34455e7734f6a4039705527bf5ab09b46998d
Reviewed-on: https://review.haiku-os.org/c/haiku/+/5659
Reviewed-by: Adrien Destugues <pulkomandy@pulkomandy.tk>
KPartitioningSystem::SetName() and KPartitioningSystem::SetType() are very similar.
SetName() already worked for GPT, and with this change SetType() now works for GPT too.
Change-Id: If1456a8f5e94ae2e2a05b75e3691f912bd1324ee
Reviewed-on: https://review.haiku-os.org/c/haiku/+/5656
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
