* gPeripheralBase keeps track of the device
peripherals before and after mmu_init
* Add ability to disable mmu for troubleshooting
* Remove static FB_BASE, we actually don't know
where the FB is yet. (depends on firmware used)
* BCM2708 defines no longer assume 0x20 address
We will be throwing away the blob memory mapping
and using our own.
* Use existing blob mapping to turn GPIO led on pre mmu_init
* Remap MMU hardware addresses from 0x7E. We could map each device,
however the kernel will throw away the mappings again anyway. For
now we just map the whole range and use offsets.
* Serial uart no longer works, however at least
we know why now :). Serial driver now needs to
use mapped address.
* Use U-Boot mmu code as base
* This will be factored out someday into common arch mmu
code when we can read Flattened Device Trees
* Move mmu_init after serial_init.
Temporary change as we will want serial_init to use
memory mapped addresses... for debugging.
* introduce a DebugUART baseclass,
* rework 8250 and PL011 implementations from kallisti5 to inherit DebutUART,
* each arch should override the IO methods to access registers.
* on ARM registers are 32bit-aligned.
* U-Boot still works for the verdex target.
* rPi still compiles, needs testing.
* Still some more consolidation needed to allow runtime choice of the UART type (as read from FDT blobs for ex.).
* serial.cpp should probably mostly be made generic as well.
* didn't touch x86 or ppc yet.
* Enable/Disable makes more sense and matches
platform loader serial functions.
* Rework PL011 code after finding a PDF covering
the details of it.
* Rename UART global defines in loader to be more
exact about location
* This makes things a little more flexible and
the interface to use the uarts cleaner.
* May want to make a generic Uart wrapper
class in uart.h / uart.cpp and call drivers
as needed from there.
* Avoid name collisions
* This uart stuff may work better as a class at
some point, however I didn't want to rock the
u-boot boat *too* much as I don't have the
hardware to test.
* Add nested function wrappers to allow usage of other
uart drivers depending on board. We may want to use this
on other platforms at some point (haha, maybe)
* Make Kernel ARM UART slightly more generic
through (BOARD_UART_CLOCK) configured per board
* Add initial Raspberry Pi serial code
* Still rough and non-working
* Change ShowTip() point parameter name to where.
* Add a parameterless ResetWindowFrame() overload that get's the current
where and calls ResetWindowFrame(BPoint where) which does the actual
work. FrameResized() calls this parameterless ResetWindowFrame()
method instead of doing the work in that method. This is functionaly
the same but allows me to call the parameterless ResetWindowFrame()
elsewhere.
SharedSolver was archiving too many constraints, partly because of
multiple typos, also because it archived some which were just artifacts
of the layout process. These extra constraints are created when the
layout calls SetRange() on the left/top/right/bottom tabs during layout.
* LinearSpec/ActiveSetSolver had to be adjusted to get access to the
constraints added by the SetRange() calls.
* BALM::TabBase was adjusted to avoid a segfault during unarchiving,
caused by an unitialized member.
* ALMFriendLayoutTest was adjusted to include a more obvious custom
constraint for testing.
Also make ALMGroup totally self-contained, i.e. BALMLayout no longer
does the parsing, and is completely unaware of ALMGroup. A small touch
of refactoring as well.
* allow for independent left, top, right and bottom insets
* allow for independent vertical and horizontal spacing between tabs
* allow for the usage of Haiku's spacing constants such as B_USE_WINDOW_INSETS
* The areas allocated for BBitmaps were never deleted, even though the
app_server deleted its part when the memory got freed.
* This resulted in a constant memory increase if the application in question
would operate on many changing large bitmaps, like photos.
* Since the bitmaps are reference counted, we don't actually know when to delete
the areas, so that the app_server now notifies the client whenever that is
possible.
* This might fix#6824.
* This removes the fVisibleToolTip member from BView, and fixes bug #5669;
BToolTipManager::ShowTip() now gets the owner of the tool tip as an extra
parameter.
* Removed the work-around to hide that bug.
* Improved ToolTipTest application to include more test cases like a view that
periodically update its tool tip via SetToolTip(const char*), and one that
sets a new tool tip every second.
* Furthermore, added a test that shows that inner views inherit the tool tip
of their parents.
* Fixed another bug in BToolTipManager::ShowTip() that would release an
extra reference to the tool tip currently shown.
* First steps at getting card command processor wired
up to the ring buffers.
* Code doesn't run yet as I have *no* idea what happens
when these rings are in an invalid state.
* rename B_TRANSLATE_CONTEXT to B_TRANSLATION_CONTEXT and
B_TRANSLATE_WITH_CONTEXT to B_TRANSLATE_CONTEXT, squashing a TODO
* adjust all uses of both macros in Haiku's source tree
* use correct header guard for collecting/Catalog.h
The renamed macros require adjustments to all external applications
using catalogs.
* Not turned on for default buttons and menuframes right now.
* Updated Deskcalc and Keymap to use buttons with rounded corners.
* Overloaded methods with radium parameters are not virtual right
now so as to not break vtables. Added /*virtual*/ before each
method that should be made virtual in ControlLook.h
* Added a light line to the left border of the down arrow frame
on menu frames as a small visual tweak.
* Replace StrokeRect() with StrokeRoundRect() when drawing the
default button indicator. This gives them a rounded
appearance if the button is also rounded.
* Added protected methods _DrawMenuFieldBackgroundOutside and
_DrawMenuFieldBackgroundInside.
* Created some protected methods to get the edge, frame, and bevel
colors from a passed in base color because it was a mess and I
needed to calculate the colors from mutiple methods. It is much
cleaner now.
* Added myself to ControlLook.cpp authors list. Assigned copyright
to Haiku, Inc. Stippi also retains his copyright.
* Tons of style fixes.
- Change all instances of `if (flags & B_FLAG)` to
`if ((flags & B_FLAG) != 0)`
- Reorder some methods.
- Reorder includes.
- Spacing.
- Updated comments.
* move versions of the B_TRANSLATE_...-macros used during collecting
of catalog keys to a specific header file, which will only be picked
up when running collectcatkeys
* fix a couple of build problems during the preprocessing of the libbe-
sources when extracting catalog keys, all due to private headers not
being found
* move ZombieReplicantView.h from kits/interface to
headers/private/interface, as this way it can be picked up when
building the libbe catalog
* rename BCatalogAddOn to BCatalogData, since it doesn't represent an
add-on, but rather the catalog data provided by an add-on
* move BCatalogData out of Catalog.{h,cpp} into its own header and
implementation file
* drop BCatalogData::MarkForTranslation() methods, they're not needed
* drop BCatalog::GetNoAutoCollectString() methods, they're not being
used anywhere
* cleanup the B_TRANSLATE_... macros somewhat
* add versions of the B_TRANSLATE_MARK_... macros that are meant to be
used in void context (when the string isn't being used by the program,
just meant to be picked up by collectcatkeys).
* adjust several apps to use B_TRANSLATE_MARK_..._VOID where needed
* adjust users of BCatalogAddOn accordingly
* it's bad practice to do a 'using <namespace>' in a header, as that
is very likely to have unintended effects, so drop those from a couple
of private Locale headers
* adjust files all over the locale kit in order to fix the problems
(by explicitly importing the required classes in the implementation
files)
* move EditableCatalog to its own header and implementation file
* move problematic BCatalog::CatalogAddOn() to EditableCatalog
* adjust Locale tools accordingly
Added two new methods to the Locale Kit in order to create a custom time
formats from a format string. One method is outputs into a char* array,
the other into a BString() and you can set the timezone.
These methods should be cleaned up, we only need 2, one to get
the time in a predefined style, the other to get a custom time format.
Also should probably do the same for dates and datetimes. But I'll let
this go for now.
I added myself to the Locale.cpp file. I retained the copyright instead
of assigning it to Haiku, Inc. because the file is under the OpenBeOS
license and I don't know what the concequences of copyright sharing are
for that license, unlike MIT.
These new methods are used to generate custom time formats in Deskbar.
Instead of using a set of Radio Buttons to choose between the predefined
time options I build my own by creating a format string and passing it
to the Locale Kit. The format string is generated from 3 checkboxes,
show seconds, show day of week, and show time zone. You can mix and match
between them choose any that you like. By default they are all off.
There are 3 new deskbar settings associated with these new options:
showSeconds, showDayOfWeek, and showTimeZone. timeFormat has gone away.
The time format string gets cached and updated only when Update() gets called
on the TimeView class.
In order to fit all the options in (there is 1 more than before) I had to
reduce the font size of the clock to 11pt when all options are turned on in
12 hour mode. For those with no imagination it looks like this:
http://imagebin.org/208162
Renamed "Open time preferences..." menuitem to "Time preferences...".
Renamed "Show Time" and "Hide Time" to "Show time" and "Hide time".
Other changes include refactoring the header files a bit. There were a lot
of headers included by header files uneccessarily. For instance BarWindow.h
now only includes <Window.h> and <Deskbar.h>. This change is mainly to
to speed up the compile time since it takes a while right now.
I copy the fBarView pointer from BarWindow in the BarApp constructor and then
use that throughout the file rather than getting the pointer from the window
each time by calling BarView(). BarView() is still available in the header
for other classes though.
I moved some message constants around since it was getting a bit jumbled.
Most of the messages related to settings are in PreferenceWindow.h.
fChangeState is moved to BarView.h since that is where the ChangeState()
function is and BarView.cpp uses that constant.
The time interval and format constants are in TimeView.h.
Make some methods public in their respective classes where it made sense.
The preference window methods to update dependent items are public, that
might get called from BarWindow when a message gets received at some point.
Also made ShowHideTime() and Time() public in StatusView.h. These methods
activate showing and hiding the clock and return the fTime clock object.
No reason they should be private.
I reindented the StatusView.h and PreferenceWindow.h headers to the standard
style. Question here, are the public: protected: and private: lines inside
of classes suppose to get indented 1 tab or not? I've seen both, the style
guide says no indent but 1 indent seems reasonable and looks pretty good.
Style fixes here and there. That's enough for one commit I think.
AMD C1E is a BIOS controlled C3 state. Certain processors families
may cut off TSC and the lapic timer when it is in a deep C state,
including C1E state, thus the cpu can't be waken up and system will hang.
This patch firstly adds the support of idle selection during boot. Then
it implements amdc1e_noarat_idle() routine which checks the MSR which
contains the C1eOnCmpHalt (bit 28) and SmiOnCmpHalt (bit 27) before
executing the halt instruction, then clear them once set.
However intel C1E doesn't has such problem. AMD C1E is a BIOS controlled
C3 state. The difference between C1E and C3 is that transition into C1E
is not initiated by the operating system. System will enter C1E state
automatically when both cores enters C1 state. As for intel C1E, it
means "reduce CPU voltage before entering corresponding Cx-state".
This patch may fix#8111, #3999, #7562, #7940 and #8060
Copied from the description of #3999:
>but for some reason I hit the power button instead of the reset one. And
>the boot continued!!
The reason is CPUs are waken up once power button is hit.
Signed-off-by: Fredrik Holmqvist <fredrik.holmqvist@gmail.com>
* make the system catalog a BCatalog instead of a BCatalogAddOn*,
such that using a non-existing system catalog won't crash but
simply return the untranslated string instead
* rename MutableLocaleRoster::GetSystemCatalog() to LoadSystemCatalog()
and adjust it to use BCatalog::SetTo() in order to replace the
data used by the given catalog
* adjust all users of gSystemCatalog accordingly
* use a locker to protect the CatalogAddOn-chain against parallel
access
* rename BCatalog::SetCatalog() to SetTo() and make it a proper
initializing function
* adjust implementation of BLocaleRoster accordingly
* unify pointer style (to type* )
* always use boolean expressions in if
* introduce some spacing for better readability
* make a couple inline methods non-inline
The gcc2 cross-compiler built on Mac OS X Lion has a bug in it
where it is erroring with 'cast specifies signature type' when
assigning 0 or NULL to a pointer to a member fuction. NULL in this
instance is correctly converted to 0 since it is illegal to assign
((void*)0) to a pointer to a member function. However, it should
be legal to assign 0 to a pointer to a member function. Thus, there
is a bug. Since I can't fix the gcc2 compiler I am working around
this bug by assigning the pointer to a do nothing function instead.
My host compiler version is
i686-apple-darwin11-gcc-4.2.1 (GCC) 4.2.1 (Apple Inc. build 5666) (dot 3)
The same error occurs using the default gcc-llvm compiler and
a standard gcc 4.61 built from source. This bug does not occur on
Mac OS X 10.6 gcc2 or gcc4, nor does it occur on Mac OS X 10.7 with
the gcc4 cross-compiler.
If and when we decide to finally leave gcc2 behind we can revert this
change.
* General DisplayPort functions in common dp.cpp
* DP port information struct in common header
* Please don't use this private accelerant common DP
code just yet as it is very early.
* If dladdr can't find an exact match, it returns the nearest symbol
less than the given address.
* If no suitable symbol can be found, but the address is within a
loaded library, dladdr returns the library name and base address.
Signed-off-by: Ingo Weinhold <ingo_weinhold@gmx.de>
* Make the locale kit a part of libbe.
* Drop the LocaleBackend kludge used from within libbe (and from
other places, too) in order to access system catalog strings.
This is now done via gSystemCatalog, which is provided and initialized
by libbe.
* Drop all references to liblocale.so from all Jamfiles.
* Add legacy symlink liblocale.so in order to keep optional packages
that rely on it in a working state.
TODO: the documentation hasn't been updated.
