* add a INTEL_TYPE_915M type to be used by 0x2592 (mobile version)
* 0x2e32 is actually non mobile, added its brothers 0x2e02, 0x2e12, 0x2e22, 0x2e42, 0x2e92
* 0x27a2 is actually mobile.
* added 0x2972, 0x2982, 0x2992 for INTEL_TYPE_965 type, and 0x2a12 for INTEL_TYPE_965M.
* added corresponding entries in intel_gart.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40838 a95241bf-73f2-0310-859d-f6bbb57e9c96
I remember there was a ticket about the localization problem in one of
this components. I'll look for it tomorrow and close them all. If I'll find them.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40734 a95241bf-73f2-0310-859d-f6bbb57e9c96
the B_TRANSLATE_WITH_COMMENT macro are misinterpreted by our
localization routines. I fix this one, because it provocate
permanent fingerprint check failure during catkeys link procedure.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40723 a95241bf-73f2-0310-859d-f6bbb57e9c96
virtual but only static methods, it is not so likely that binary compatibility issues may arrise
from using it in new apps. Adjusted all the Jamfiles that included the private libicon headers. Note
that it was never necessary to link against libicon.a, since it's part of libbe anyway. There was one
instance where that was done. Hopefully it does not break the build, but I did this change a while ago,
tested it and then the harddrive began failing.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40679 a95241bf-73f2-0310-859d-f6bbb57e9c96
- Set watching variable when leaving the watching method.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40635 a95241bf-73f2-0310-859d-f6bbb57e9c96
iconsintently.
Respect the 80 columns limit, update copyright, used calloc instead of
malloc.
No functional changes (hopefully)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40597 a95241bf-73f2-0310-859d-f6bbb57e9c96
handling:
* package attributes are now compatible with the low level attribute
handling of other HPKG attributes (such that 'package dump' now shows
package attributes, too)
* dropped type names from hpkg format, the attributes were identified
by IDs already and this simplifies the code considerably. Type names
are now handled in BLowLevelPackageHandler only.
* instead of rolling their own mechanism, high-level package attributes
handling is now implemented via a corresonding set of
AttributeHandler-subclasses
* adjusted package writer to only write package attributes that are
needed (empty ones are left out)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40466 a95241bf-73f2-0310-859d-f6bbb57e9c96
variables to make the function a bit clearer, hopefully.
* Fixed the wrong order of releasing the reference, and removing the object
from the hash table -- thanks Rene!
* Added a bit of documentation to InterfaceAddress::Prepare().
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40455 a95241bf-73f2-0310-859d-f6bbb57e9c96
This fixes random memory access on interface removal.
* Optimized IndexOfAddress() for NULL addresses.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40447 a95241bf-73f2-0310-859d-f6bbb57e9c96
have duplicates there, it should certainly not panic.
* Do not add unspecified addresses to the hash table.
* The result of adding the initial address of an interface was ignored; now, the
interface is correctly destructed, if necessary.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40444 a95241bf-73f2-0310-859d-f6bbb57e9c96
* clean up
* directories don't seem to have a valid contiguous flag, fixes directories with many files.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40431 a95241bf-73f2-0310-859d-f6bbb57e9c96
* fleshed out RepositoryWriterImpl
* renamed BRepositoryHeader to BRepositoryInfo (in accordance with
BPackageInfo)
* adjusted BRepositoryInfo to be able to parse itself from a
driver_settings file
* added package_repo binary (only 'create' works as of yet)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40405 a95241bf-73f2-0310-859d-f6bbb57e9c96
Also the read flags are synced with the server. This makes it easy to have the same mailbox state on different machines.
Messages could be deleted by delete them form the folder (not when moving them to trash) This maybe needs some more thoughts but its a save solution. One problem with moving it to trash is that you also want to have the option to restore it again. If it is a header only messages and you delete it from the server you lose the body part. Complete messages could theoretically be append to the mailbox again when restoring the mail form trash. Append is commented out though...
An solution for the delete problem would be to move the message to a trash folder on the server. Moving mails on the server is not implemented yet, though.
You can subscribe or unsubscribe to a mailbox using the imap pref panel. The settings are written to the server and are not stored locally.
Add some helper classes which could also be used for POP and SMTP:
ServerConnection: abstract ssl or socket connection
ConnectionReader (still a bit IMAP specific but could be easily separated IMHO): read complete lines or a bunch of data more efficient. Old implementation did it byte by byte, this class read data in bunches and buffer the left over for the next request...
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40399 a95241bf-73f2-0310-859d-f6bbb57e9c96
Remove button in the pref app removes the complete account because we don't have separate chains any more. The pref app stays a mess, needs some layout love! (I did it even look worse...)
The new account/mail settings classes know if they have been changed but the current pref panel does not use this feature very well. It always mark the settings as modified when the settings view is displayed or more precise when the settings view is detached from the pref window, this could be optimized. The according mail protocol is completely restarted when their settings changed.
Some system filters are now directly integrated in the mail protocols. Hopefully make things easier to understand.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40398 a95241bf-73f2-0310-859d-f6bbb57e9c96
#7135#7140#7141#7145#7186#7188#7191#7136#7187#7184#7185#7192#7138#7139
with some changes and exclusions:
- all attempts to localize "fprintf(stderr,..." and "printf(..."
replaced by _untranslated_ "syslog(LOG_ERR ...";
- following *Translator.rdef files, that were not added in mentioned patches
were additionally created:
SGI, TIFF, RAW, RTF, PPM, WebP, EXR, STXT, WonderBrush, GIF, TGA;
- some small fixes for consistent catalogs building.
Thank you, Jorma! Please check. ;-)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40357 a95241bf-73f2-0310-859d-f6bbb57e9c96
* added kernel-compatible datatypes for reading package info attribute
values (PackageInfoAttributeValue.h) - these will be used at a later
stage by the package-fs to transport those attributes to userland
when asked to do so (by ioctl)
* implemented parsing of package info attributes in PackageReaderImpl
* added support for compressed package attribute section to
PackageReaderImpl
* completed the writing of package info attributes in PackageWriterImpl
and fixed a couple of bugs exposed by parsing
* adjusted 'package list' to show the package info attributes as they
are found
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40354 a95241bf-73f2-0310-859d-f6bbb57e9c96
2) Functionality of the handling the rate for AC97 Front PCM DAC added.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40327 a95241bf-73f2-0310-859d-f6bbb57e9c96
public and private API (still far from ideal, but a start):
* moved several HPKG-classes into the public namespace BPackageKit::HPKG
* added fImpl-wrappers around PackageReader and PackageWriter to hide
most of the gory details
* adjusted 'package'-binary and packagefs accordingly
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40320 a95241bf-73f2-0310-859d-f6bbb57e9c96
- Based on GPL code in linux kernel staging
- Low level communications mostly done
- Probes GPIO pins and detects LEDs
- Sets device up and pushes firmware
- Detects MAC address
- blinks LED through a spawned thread based on driver state
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40302 a95241bf-73f2-0310-859d-f6bbb57e9c96
* added class BPackageInfo, which contains packaging attributes of
a package (the values relevant for package management)
* implemented parser (mostly) for reading a BPackageInfo from a config
file (.PackageInfo) in order to pass them on to the PackageWriter
when creating a package
* pulled hpkg-related stuff from bin/package into the package kit
* adjusted packagefs-Volume to skip .PackageInfo files when populating
the mountpoint, as those files shouldn't appear as part of an
activated package
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40301 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Inline extent data isn't read with the file_cache yet as the data is not block aligned.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40282 a95241bf-73f2-0310-859d-f6bbb57e9c96
was rewritten to Haiku MultiAudio API.
This changeset replaces both old version of the same driver written for
BeOS R3 Sound API and ali5451 driver that handles the same audio hardware.
The driver was tested with SiS 7018 and ALi M5451 cards. Trident DX/NX
support still should be tested.
Some parts, related to ALi M5451 support were inspired by original ali5451
code so the copyright (c) 2009 by Krzysztof Äwiertnia was added in the source.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40273 a95241bf-73f2-0310-859d-f6bbb57e9c96
Both JPEGTranslator and JPEG200Translator were "exporting" gSettings symbol,
which when loaded within a app (like Paladin) exporting the same global symbol
was leading to a symbol resolution error. See #7114 for details.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40245 a95241bf-73f2-0310-859d-f6bbb57e9c96
a folder to some other place in the filesystem hierarchy
* add helper function to VFS that encapsulates the "conversion" of a
vnode-pointer to a fs_vnode-pointer (used by bindfs)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40238 a95241bf-73f2-0310-859d-f6bbb57e9c96
drivers in the future, such that NetworkStatus and similar software can show
nice names for the devices. The device manager should implement this and
return the B_DEVICE_PRETTY_NAME of the device (and in turn, new style drivers
should actually set this).
* Implemented handling of this ioctl in the scsi_periph to return the vendor/
product strings.
* Implemented this in the ATA bus manager to return the model from the info
block.
* KDiskDevice now fills in the partition_data::name if the B_GET_DEVICE_NAME
succeeds.
* As a side effect, at least BootManager now shows the drive name; maybe
DriveSetup does as well for the raw device.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40231 a95241bf-73f2-0310-859d-f6bbb57e9c96
* inject modification time of package folder into root folder of
package-fs
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40230 a95241bf-73f2-0310-859d-f6bbb57e9c96
the mount parameters
* packagefs_read_stat(): put some sane value into st_blocks
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40227 a95241bf-73f2-0310-859d-f6bbb57e9c96
mount parameters - there doesn't seem to be a way for a filesystem
to access the path to which it was mounted, is there?
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40225 a95241bf-73f2-0310-859d-f6bbb57e9c96
order to be able to mount packages from somewhere else than
'/boot/common/packages' (squashes a TODO)
* squashed another TODO about needing to remove nodes of already
installed packages if anything goes wrong during the activation
of a package domain
* fix what to me looks like a bug in Volume::AddPackageDomainJob::Do(),
fDomain is accessed unconditionally in the destructor, so NULLing
it here is bad (it doesn't make sense from a reference-passing POV
either). The problem never showed as this code is never being executed
currently (no way to add additional package domains as of yet)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40214 a95241bf-73f2-0310-859d-f6bbb57e9c96
* The team and thread kernel structures have been renamed to Team and Thread
respectively and moved into the new BKernel namespace.
* Several (kernel add-on) sources have been converted from C to C++ since
private kernel headers are included that are no longer C compatible.
Changes after merging:
* Fixed gcc 2 build (warnings mainly in the scary firewire bus manager).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40196 a95241bf-73f2-0310-859d-f6bbb57e9c96
This bug only happens for bitmaps with unusual lengths (often the last blockgroup block bitmap) and which happen to be full.
Should fix#7074.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40175 a95241bf-73f2-0310-859d-f6bbb57e9c96
* BitmapBlock::FindMarked/FindUnmarked() tried to find a free bit
at the end of a full bitmap. This fixes#7069.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40143 a95241bf-73f2-0310-859d-f6bbb57e9c96
* I reused crc_table.cpp from the UDF filesystem and switched it to have the reversed algorithm,
then generated the table in CRCTable.cpp
* added a binary search for extent tree leaves.
* fixed a check in InodeAllocator::New().
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40129 a95241bf-73f2-0310-859d-f6bbb57e9c96
specifier to float constants. Hopefully I'm done with this now.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40110 a95241bf-73f2-0310-859d-f6bbb57e9c96
Butterfly by Geoffry Song.
Leaves by Deyan Genovski and Geoffry Song.
Thanks guys!
I fixed a few coding violations and wrote the Jamfiles.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40098 a95241bf-73f2-0310-859d-f6bbb57e9c96
Expanded search in every configuration, not only first. ELSA USB modem for instance
publish two configurations, the first one being a vendor-specific one for
Windows NT.
ACMDevice now don't assume anymore union functional descriptor is always there.
The data interface index can be found also in Call Management (CM) functional
descriptor.
(Style cleanup pending...)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40092 a95241bf-73f2-0310-859d-f6bbb57e9c96
When in nondirect mode, SwapBuffers() wasn't respecting the vsync parameter.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40051 a95241bf-73f2-0310-859d-f6bbb57e9c96
code is not used; maybe it was not implemented completly
or BePDF could not render it correctly.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39996 a95241bf-73f2-0310-859d-f6bbb57e9c96
Postfix/prefix increment evaluation order is not changed by parantheses. Use '+ 1' for readability instead. CID 2982.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39966 a95241bf-73f2-0310-859d-f6bbb57e9c96
Afaict it looks like it results in unbalanced Acquire calls on the parent. CID 10393.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39964 a95241bf-73f2-0310-859d-f6bbb57e9c96
A bit confused about the signedness handling in ring_buffer internals though, int32 to size_t.
Unnested the acpi_namespace_read function a bit and removed dead check for negative lengths from read. CID 4093.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39963 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Use strlcpy() instead of memcpy() to ensure that the dirent is properly
terminated.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39954 a95241bf-73f2-0310-859d-f6bbb57e9c96
bytes were initialized to 0 due to wrong use of sizeof().
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39953 a95241bf-73f2-0310-859d-f6bbb57e9c96
actually hit this limit.
* Use snprintf() instead of sprintf() as suggested by CID 6447 (even though the
USB module isn't supposed to return such a malformed string).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39908 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Check the length of the incoming buffer before accessing it through the union.
It's necessary to do this dependent on the operation at hand, since the caller
doesn't need to provide the full union size and the size may differ between
(still compatible) protocol versions.
* Replace memcpy() by user_memcpy() where data is exchanged with userland.
* Small style cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39907 a95241bf-73f2-0310-859d-f6bbb57e9c96
variable. Didn't matter, as the parameter is only accessed through the
usb_raw_command variable that it is casted to early in the function. CID 5219.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39906 a95241bf-73f2-0310-859d-f6bbb57e9c96
crash trying to delete the not created allocator. CID 9562.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39905 a95241bf-73f2-0310-859d-f6bbb57e9c96
Coverity was intentional (as explained by the comment). That the fInterval
member was somehow totally forgotten though, wasn't. This should only affect
EHCI and OHCI as they take the interval into account. Might fix some strange
behaviour, but most likely won't, as the interval range is rather narrow and
shouldn't be too noticeable if set incorrectly. CID 9558.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39904 a95241bf-73f2-0310-859d-f6bbb57e9c96
* validate fBlockShift in superblock.
* Volume::AllocateBlocks() now uses an absolute fsblock instead of a blockgroup related fsblock.
* AllocationBlockGroup now provides absolute fsblock values.
* added support for extents feature: ExtentStream class is the equivalent for DataStream class for extent operations.
The extent tree implementation is very basic, should work for normal growing/shrinking
operations, but not for sparse files. When enlarging a file and extent tree is full,
the root is moved in a new block and a new level is added on top. Extents can usually
be extended when adjacent blocks are allocated. Shrinking happens by removing leafs
one after another.
* removed empty IndexedDirectoryIterator.*
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39886 a95241bf-73f2-0310-859d-f6bbb57e9c96
Something appeards to be very wrong with codec registration.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39885 a95241bf-73f2-0310-859d-f6bbb57e9c96
* A lot of HID definitions got extracted from USB_hid.h into their
own files. Many more definitions have been added from the specs.
* The names have been moved into the proper B_* namspace.
* The USB hid driver has been adapted for the changes.
Thanks a lot and sorry for the delay!
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39874 a95241bf-73f2-0310-859d-f6bbb57e9c96
read the attribute "transport_address" created and set to an empty
string by the print_server when the printer was created.
fEndpoint used an empty host name to connect to and then failed.
Not sure why this caused a crash after closing the error dialog.
Maybe something went wrong in the destructor using an invalid fEndpoint?
Cures the symptoms of ticket #6973.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39818 a95241bf-73f2-0310-859d-f6bbb57e9c96
needed a corresponding adjustment to convert it back to host order before
working with it. Fixes#6972.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39812 a95241bf-73f2-0310-859d-f6bbb57e9c96
* consoled: CID 1696, the found deadkey string is unused.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39811 a95241bf-73f2-0310-859d-f6bbb57e9c96
* DirectoryIterator::FindEntry() now takes name length in account for name comparison.
* cleanup
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39809 a95241bf-73f2-0310-859d-f6bbb57e9c96
Builds but won't work because the tty module lacks essential calls to read and write data :^)
Lots of ifdef since I need the R5 code around for now.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39791 a95241bf-73f2-0310-859d-f6bbb57e9c96
- use new(std::nothrow) from <new> since we dropped kernel_cpp.h,
- fix "declared 'extern' and later 'static'" warning,
- fix "deprecated conversion from string constant to 'char*'" warning in tracing code.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39784 a95241bf-73f2-0310-859d-f6bbb57e9c96
rules and support files that don't really apply anymore.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39763 a95241bf-73f2-0310-859d-f6bbb57e9c96
well this was working, but since it was non-functional on Haiku anyway this
shouldn't hurt.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39762 a95241bf-73f2-0310-859d-f6bbb57e9c96
and doesn't come with BeOS backwards compatibility. It also has the BeOS
compatibility ioctl ops removed and such. I've actually made this back in april,
so I don't really remember any more details.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39760 a95241bf-73f2-0310-859d-f6bbb57e9c96
- Make the S&T groups navigateable by pressing the S&T key + arrow down/up. Arrow down means to send the active S&T group to the bottom. Arrow up means to rise the bottom S&T group to the front. If no S&T group is selected, in both cases the front-most S&T group is activated.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39751 a95241bf-73f2-0310-859d-f6bbb57e9c96
to whole numbers. The whole imageable area should now be
available for printing.
Hope this does not have a negative effect on image quality.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39734 a95241bf-73f2-0310-859d-f6bbb57e9c96
imageable area; made them absolute to the left, top
of the page. The page contents should now be positioned
correctly.
* Make sure the image to be printed on the page is
inside the imageable area. This fixes the configuration
error that the page is outside the imageable area.
TODO fix the implementation limitation that up to 1 Inch of the
total imageable page width and height cannot be used. There
is a comment in the source code that explains why that is.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39733 a95241bf-73f2-0310-859d-f6bbb57e9c96
the correct sender MAC address in outgoing link level packets.
* SocketStatus() now also works correctly for bound protocols, ie. receiving
data from a bound link level socket is now working as well.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39722 a95241bf-73f2-0310-859d-f6bbb57e9c96
address from transport_address attribute but a custom one. Fixed.
Now explicitly shutdown the connection at job end, some printers requires this.
Style cleanup that was lying since months, but this code will be reworked
again soon, as the SetupWindow needs to be rebuild for layout API and locale
translation...
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39718 a95241bf-73f2-0310-859d-f6bbb57e9c96
By the way, is there a pattern how to select the colours?
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39708 a95241bf-73f2-0310-859d-f6bbb57e9c96
Simplify Decorator highlighting code. Thanks Ingo for the hard part done in the previous highlight changes!
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39702 a95241bf-73f2-0310-859d-f6bbb57e9c96
- Added ExtendDirtyRegion(), given a decorator region it extends the given
dirty region. Implemented only in DefaultDecorator yet.
- Added [Set]RegionHighlight() which allows to set/get a highlight for a
decorator region. The visual representation of the set highlight value
is up to the derived classes. The only globally defined value is
HIGHLIGHT_RESIZE_BORDER, though it's not implemented anywhere yet.
* DefaultDecorator: Added the highlight for the component as a parameter to
GetComponentColors(). Added a wrapper _GetComponentColors() with the old
interface, fetching the highlight from the base class.
* SATDecorator: Defines and interprets its own highlight value
HIGHLIGHT_STACK_AND_TILE.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39640 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Use a separate color array for the buttons, instead of using that for the
tab.
* _DrawBlendedRect(): No longer gets the focus flag, but gets a color array
instead.
* _GetBitmapForButton(): Made non-static and removed the "focus" and "object"
parameters.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39637 a95241bf-73f2-0310-859d-f6bbb57e9c96
default decorator and used it instead of Decorator::Region where appropriate
(GetComponentColors(), _GetBitmapForButton()).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39636 a95241bf-73f2-0310-859d-f6bbb57e9c96
- Introduced a virtual GetComponentColors(), that returns an array with the
current colors for the specified component.
- Removed all rgb_color members. Replaced the ones that were actually
constant by const (or static const) ones and made use of
GetComponentColors() where the non-constant ones were used.
* SATDecorator:
- Turned rgb_color members into constants and added an overriding version
of GetComponentColors().
- HighlightBorders(): Invalidate the tab, too, as we use the border
colors for drawing the outer lines of the tab (was this intented?).
Fixes artifacts when breaking apart titled windows.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39630 a95241bf-73f2-0310-859d-f6bbb57e9c96
closing flag sequence. See RFC1662 §4.4.2, last paragraph.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39628 a95241bf-73f2-0310-859d-f6bbb57e9c96
virtual DrawButtons().
* SATDecorator: Override DrawButtons() instead of _DrawTab(), thus saving a
good deal of code duplication.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39627 a95241bf-73f2-0310-859d-f6bbb57e9c96
* whitespace cleanup and renamed log2() to radeon_log2 (conflicts with log2 in math.h)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39620 a95241bf-73f2-0310-859d-f6bbb57e9c96
RegionAt() just gets a point and returns which region was hit. This is in
order to move behavioral code to [Default]WindowBehaviour. I'm not happy
with this solution either, but to do it properly one would have to break the
Decorator interface into separate look and feel interfaces and reorganize the
interaction with WindowBehaviour. A task for the so-inclined reader. :-)
* Adjusted the Decorators implementations, but really tested only the default
one.
* DefaultWindowBehaviour:
- Replaced _ActionFor() method by a _RegionFor() which interprets the region
returned by Decorator::RegionAt() and converts it to a "functional" region,
i.e. combines cases we handle the same way.
- MouseDown():
- Handle the click region cases more in detail, disentangling the mouse
button cases. With the following effects:
- The middle mouse button has no effect anymore.
- Left and right mouse buttons no longer share common behavior. A right
click on a decorator button will send the window to the back.
- The window key window management modifier combo does now have precedence,
i.e. Cmd-Ctrl-click on the decorator buttons will have the same effect as
clicking anywhere in the window.
- When modifiers change between the clicks, reset the click count. Prevents
a standard click in the window followed by a Cmd-Ctrl-click from being
recognized as a double-click.
- Mouse*(): Introduced a fMinimizeCheckOnMouseUp which works similar to
fActivateOnMouseUp, just for double-clicks. The decision whether a
double-click minimizes the window is postponed until releasing the mouse
button. After moving the mouse sufficiently far or waiting half a second
without moving the mouse the window will no longer be minimized. Fixes
#6868.
- MouseUp(): Moved the primary mouse button check without the
"decorator != NULL" block. I suppose this fixes issues with the Cmd-Ctrl
actions and decoratorless windows (if those actually exist).
I can't wait to hear what things I've broken. :-)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39602 a95241bf-73f2-0310-859d-f6bbb57e9c96
