menu item it's associated with rather than an input string. This allows it
to calculate the position to start the input at, as well as the correct
line to place it on. The previous solution always put the input at the
center line, which happened to be the right place by happy coincidence
unless one also had the menu items for viewing/saving the debug syslog
present.
* Implement input buffer scrolling, and consequently lift the previous size
limit on user input (it is now only limited by the size of the passed in
buffer).
* Implement parsing of the input buffer to allow it to handle comma-separated
options. Thus, one can now input things like "disable_smp true, serial_debug_output false"
and it will be handled properly.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41706 a95241bf-73f2-0310-859d-f6bbb57e9c96
it with our new setting. Otherwise we might end up with an illegal value as the
interrupt threshold which might inhibit interrupt generation alltogether
depending on the controller implementation. This was the case for the ATI/AMD
SBx00 chipsets. Therefore fixes#5551.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41690 a95241bf-73f2-0310-859d-f6bbb57e9c96
interrupt handler every millisecond so it can check for interrupts to handle.
While this is certainly not ideal, it allows EHCI to run (surprisingly well
even) on chipsets that experience interrupt routing issues.
It can be enabled with the safemode setting "ehci_polling on" that can either
be entered using the new advanced debug option entry in the bootloader and/or
in the kernel settings file.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41688 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Also do a very small bit of refactoring, to have MediaFileInfoView take better charge of its max size.
+alpha
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41686 a95241bf-73f2-0310-859d-f6bbb57e9c96
ones that aren't masked. This reversed the enabled interrupts and therefore
disabled the already installed ACPI SCI handler and wrongly enabled the other
interrupt pins instead on PIC to IO-APIC handover. Probably fixes#7525.
+r1alpha3
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41685 a95241bf-73f2-0310-859d-f6bbb57e9c96
generator). There are chipsets (namely ATI/AMD SBx00) where mode 2 doesn't seem
to work (the counter isn't reloaded after the countdown has completed). Mode 0
has the same resolution as mode 2 and, as interrupts are disabled at this point
in booting, is otherwise equivalent as well. I've tested this on 5 machines
available to me and it doesn't seem to have any negative effect.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41683 a95241bf-73f2-0310-859d-f6bbb57e9c96
With that we will usually start right away without having to wait for the
timer to be in the desired state, which removes roughly 116ms of spinning
around for a normal calibration run.
* Read back the value once after programming. The delay this introduces
accounts for the fact that the counter will only start counting down on the
next clock cycle.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41680 a95241bf-73f2-0310-859d-f6bbb57e9c96
bound to prevent spinning forever if we have a very unstable TSC that we
simply can't calibrate. Shouldn't really happen though.
* Set the gate low for channel 2 on exit if we used it as the counter.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41678 a95241bf-73f2-0310-859d-f6bbb57e9c96
copies of it with a call to that.
* Make the variable names more readable and spacing cleanup.
No functional change intended.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41670 a95241bf-73f2-0310-859d-f6bbb57e9c96
timer code has such definitions too, but they're not quite as verbose. Will
eventually make the latter use these too.
* Prepare for possibly using other PIT channels for the calibration. Right now
everything's the same still.
* Add disabled print of the resulting factors.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41669 a95241bf-73f2-0310-859d-f6bbb57e9c96
Hopefully undoes the string changes seen on HTA since r41629.
Note that the asymmetric escaping/unescaping (PlainTextCatalog::WriteToFile()
vs. BHashMapCatalog::SetString()) is rather broken and needs to be fixed.
+alpha I guess.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41667 a95241bf-73f2-0310-859d-f6bbb57e9c96
* make sure the PortEnable bit is disabled (specification page 28)
* 250ms is too long: USB 2.0 specifies only 50ms. This prevented one of my devices to be detected.
+alpha
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41658 a95241bf-73f2-0310-859d-f6bbb57e9c96
active config and update the info for the remaining shared link device
entries. Seen on KVM for the (PCI) ACPI interrupt, but happens where there is
no _SRS method for a device (as this one is optional). I find that a bit
strange however as in such a case no _PRS (possible resources) should be
present either, especially not one advertising a config different from the
current one.
* Print the routing table later, after enabling irq routing, so that possible
changes due to such a fallback are included.
* Fix a typo.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41652 a95241bf-73f2-0310-859d-f6bbb57e9c96
the beginning.
* Added header for the get_decorator() functions and friends.
* Minor coding style cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41638 a95241bf-73f2-0310-859d-f6bbb57e9c96
Fixes#7543 (ReadOnlyBootPrompt only showing English welcome text).
* Disabled fingerprint check in linkcatkeys. Fingerprints change due to the
BHashMapCatalog::SetString() change.
+alpha 3
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41629 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Minor tweaks to the spacing, made the window, and the accounts list view a
bit wider.
+alpha (if the translated strings removal doesn't cause problems)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41626 a95241bf-73f2-0310-859d-f6bbb57e9c96
* I tried to reuse as much state from BControl as possible, so I removed a few
states.
* Also made the flags private, and added protected SetInside()/IsInside()
methods.
* Removed useless BIconButton::ID().
* Adjusted users.
* Minor cleanup, automatic white space cleanup.
-alpha
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41611 a95241bf-73f2-0310-859d-f6bbb57e9c96
did any harm, but we'll see if the crashing improves.
+alpha
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41608 a95241bf-73f2-0310-859d-f6bbb57e9c96
which I misunderstood. setdecor can now refer to decorators by their
short (i.e. file system) name as well.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41602 a95241bf-73f2-0310-859d-f6bbb57e9c96
