bsh 1928d3ed36 enable BTUART		2003-06-18 09:40:06 +00:00
..
becc.c	Handle 64bit DMA addresses on PCI for platforms that can (currently only	2003-06-15 23:08:53 +00:00
becc_button.c	Add a driver for the reset button on the ADI BECC.	2003-04-20 20:50:49 +00:00
becc_csrvar.h	Support for ADI Engineering's Big Endian Companion Chip for the	2003-01-25 01:57:17 +00:00
becc_icu.c	Rename IPL_IMP -> IPL_VM.	2003-06-16 20:00:56 +00:00
becc_intr.h	Support for ADI Engineering's Big Endian Companion Chip for the	2003-01-25 01:57:17 +00:00
becc_pci.c	Sprinkle a few aprint_normal()s in place of printf().	2003-05-23 05:21:26 +00:00
becc_pci_space_asm.S	Make big-endian mode a little closer to working on the BRH. I can talk	2003-05-30 18:38:02 +00:00
becc_space.c	Make big-endian mode a little closer to working on the BRH. I can talk	2003-05-30 18:38:02 +00:00
becc_timer.c	Sprinkle a few aprint_normal()s in place of printf().	2003-05-23 05:21:26 +00:00
beccreg.h	Channel active is bit 10, not 9.	2003-04-05 04:18:26 +00:00
beccvar.h	Bump copyright date for last.	2003-03-25 19:47:30 +00:00
files.becc	Make big-endian mode a little closer to working on the BRH. I can talk	2003-05-30 18:38:02 +00:00
files.i80200	Implement pmc(9) -- An interface to hardware performance monitoring	2002-08-07 05:14:47 +00:00
files.i80312	Move the DMA tag initialization functions into i80312.c.	2002-08-01 19:55:02 +00:00
files.i80321	Back out unintentional commit.	2003-01-25 02:12:22 +00:00
files.ixp425	add console unit number to configuration parameter.	2003-06-01 01:49:56 +00:00
files.pxa2x0	Gah, fix previous. s/defopt/defflag/	2003-06-06 19:56:59 +00:00
i80200_icu.c	Interrupt steering register is cp13.8, not cp13.2 (D'oh!).	2002-06-25 19:39:51 +00:00
i80200_irq.S	Garbage-collect prev_intr_depth; nothing uses it.	2003-01-02 23:54:39 +00:00
i80200reg.h	Correct a comment.	2002-06-25 19:41:08 +00:00
i80200var.h	i80200_extirq_dispatch takes a struct irqframe * now.	2002-08-16 04:55:48 +00:00
i80312.c	Handle 64bit DMA addresses on PCI for platforms that can (currently only	2003-06-15 23:08:53 +00:00
i80312_gpio.c	Add routines for accessing the general purpose I/O facility of	2001-11-29 08:27:11 +00:00
i80312_mem.c	Change some #if 0 to #ifdef VERBOSE_INIT_ARM.	2001-12-18 02:52:00 +00:00
i80312_pci.c	Sprinkle a few aprint_normal()s in place of printf().	2003-05-23 05:21:26 +00:00
i80312_space.c	remove trailing \n in panic(). approved perry.	2002-09-27 15:35:29 +00:00
i80312reg.h	Clean up the i80312 PMU definitions.	2002-01-24 01:21:44 +00:00
i80312var.h	Move the DMA tag initialization functions into i80312.c.	2002-08-01 19:55:02 +00:00
i80321.c	Handle 64bit DMA addresses on PCI for platforms that can (currently only	2003-06-15 23:08:53 +00:00
i80321_aau.c	Use aprint*().	2003-04-29 01:07:30 +00:00
i80321_icu.c	Rename IPL_IMP -> IPL_VM.	2003-06-16 20:00:56 +00:00
i80321_intr.h	Use the generic irq_dispatch.S	2003-01-03 00:41:19 +00:00
i80321_mcu.c	Basic support for the Intel i80321 I/O Processor (Xscale core).	2002-03-27 21:45:47 +00:00
i80321_pci.c	Use aprint*().	2003-04-29 01:07:30 +00:00
i80321_space.c	remove trailing \n in panic(). approved perry.	2002-09-27 15:35:29 +00:00
i80321_timer.c	Use aprint*().	2003-04-29 01:07:30 +00:00
i80321_wdog.c	Use aprint*().	2003-04-29 01:07:30 +00:00
i80321reg.h	Add some more register definitions.	2003-02-06 03:01:32 +00:00
i80321var.h	Define the iopmu (even though it's not being used yet).	2003-02-06 03:16:48 +00:00
iopaau.c	Use aprint*().	2003-04-29 01:07:30 +00:00
iopaaureg.h	* Define the 8-input, 16-input, and 32-input descriptors.	2002-08-03 21:58:55 +00:00
iopaauvar.h	Add support for "xor5", "xor6", "xor7", and "xor8".	2002-08-04 02:26:18 +00:00
ixp425.c	add IXDP425 PCI interrupt	2003-05-24 01:59:32 +00:00
ixp425_com.c	delete unneed bit for uart initialize.	2003-06-03 14:13:30 +00:00
ixp425_comvar.h	add console unit number to configuration parameter.	2003-06-01 01:49:56 +00:00
ixp425_intr.c	Rename IPL_IMP -> IPL_VM.	2003-06-16 20:00:56 +00:00
ixp425_intr.h	support IXP425 Intel Network Processor	2003-05-23 00:57:23 +00:00
ixp425_io.c	change into the form KNF	2003-06-01 21:35:39 +00:00
ixp425_sip.c	change into the form KNF	2003-06-01 21:35:39 +00:00
ixp425_sip_io.c	change into the form KNF	2003-06-01 21:35:39 +00:00
ixp425_sipvar.h	add console unit number to configuration parameter.	2003-06-01 01:49:56 +00:00
ixp425_timer.c	support IXP425 Intel Network Processor	2003-05-23 00:57:23 +00:00
ixp425reg.h	fix interrupt number	2003-06-03 09:20:20 +00:00
ixp425var.h	add IXDP425 PCI interrupt	2003-05-24 01:59:32 +00:00
pxa2x0.c	- Rearrange the PXA2x0 support code to better support attaching	2003-06-05 13:48:26 +00:00
pxa2x0_a4x_io.S	Support Intel PXA250 and PXA210 application processors.	2002-10-19 19:31:38 +00:00
pxa2x0_a4x_space.c	Support Intel PXA250 and PXA210 application processors.	2002-10-19 19:31:38 +00:00
pxa2x0_com.c	enable BTUART	2003-06-18 09:40:06 +00:00
pxa2x0_dma.c	Support Intel PXA250 and PXA210 application processors.	2002-10-19 19:31:38 +00:00
pxa2x0_gpio.c	- Rearrange the PXA2x0 support code to better support attaching	2003-06-05 13:48:26 +00:00
pxa2x0_gpio.h	- Rearrange the PXA2x0 support code to better support attaching	2003-06-05 13:48:26 +00:00
pxa2x0_intr.c	Rename IPL_IMP -> IPL_VM.	2003-06-16 20:00:56 +00:00
pxa2x0_intr.h	- Rearrange the PXA2x0 support code to better support attaching	2003-06-05 13:48:26 +00:00
pxa2x0_lcd.c	make this compile again:	2003-06-17 09:43:14 +00:00
pxa2x0_lcd.h	make this compile again:	2003-06-17 09:43:14 +00:00
pxa2x0_space.c	Add entries for byte-wide {read,write,set} region.	2003-06-06 09:05:42 +00:00
pxa2x0reg.h	- Correct a couple of comments.	2003-06-11 20:43:01 +00:00
pxa2x0var.h	- Rearrange the PXA2x0 support code to better support attaching	2003-06-05 13:48:26 +00:00
xscale_pmc.c	Merge the nathanw_sa branch.	2003-01-17 21:55:23 +00:00
xscalereg.h	Implement pmc(9) -- An interface to hardware performance monitoring	2002-08-07 05:14:47 +00:00
xscalevar.h	Move XScale common prototypes to xscalevar.h. Add xscale_pmc_dispatch()	2002-10-08 23:59:41 +00:00