b64b7c2964
New IDE xfer flag: C_SENSE, set by the ATAPI back-end sense info needs to
...
be retrieved.
1998-11-17 14:14:52 +00:00
0c3ca7b31e
Finish implementing interrupt-driven card insertion and removal support.
...
- Deactivate the card on removal and queue a REMOVAL event for the socket's
event thread to finish the detach.
- Queue an INSERTION event for the socket's event thread on insertion.
Implement a few missing infrastructure pieces to support this.
Hot swapping of PCMCIA cards now "works". (Not quite; things like network
devices need changes for their respestive subsystems. These changes are
coming soon...)
1998-11-17 08:49:11 +00:00
fc44652721
Implement a kernel thread per PCMCIA socket to handle card insertion and
...
removal events.
1998-11-16 22:41:01 +00:00
d2afdb5b59
Fix some whitespace lossage, canonicalize some media names.
1998-11-16 19:13:31 +00:00
8146c925da
If we get a TX interrupt with no packets buffered, ignore it. This can occur
...
if the chip is reset while transmitting.
XXX
This occurs at boot time because the SIOCADDMULTI always resets the interface
when adding the `all hosts groups' -- usually while the ARP packet is being
transmitted. All drivers should be fixed to not reset the interface when
changing the multicast filter, if possible.
1998-11-12 13:18:26 +00:00
1e71e76d6c
- clearify the boot messages (features supported vs features used). Thanks to
...
Havard Eidnes for his complains about this :)
- fix some typo in comments
- hoppefully better detection of drives reporting bogus PIO modes.
1998-11-11 19:38:27 +00:00
21e1b057bc
Sorry, I forgot to revert "#if 0".
1998-11-09 07:01:47 +00:00
2749e8b74a
We don't need the pci headers here.
1998-11-08 22:02:25 +00:00
e58cf6b359
Add definitions for the ATA power management commands
1998-11-05 22:49:09 +00:00
37bbf03777
fix pcic_chip_socket_enable() to works on more machines.
1998-11-05 07:55:48 +00:00
7b10c3e7e4
Add the 'ex' driver, a DMA driver for 3Com 90x and 90xB cards. Rename
...
constants from EP_ to ELINK_ since they're now used in the ex driver as well.
1998-11-04 00:29:28 +00:00
cd7f7eff85
Code common to RealTek 8019 and 8029 NE2000-compatible Ethernet chips.
...
Includes media selection support and support for Full-duplex.
1998-10-31 00:44:33 +00:00
fa97a53c11
Multiple inclusion protection.
1998-10-31 00:31:43 +00:00
992f2906ba
Move the RTL8029 register definitions to <dev/ic/rtl80x9reg.h>, and add
...
the registers/bits present in the RTL8019 (ISA version).
1998-10-31 00:27:41 +00:00
074bc27605
- Add filenames for VDAC/cursor sprite hardware descriptions; bt431reg.h,
...
bt459reg.h, bt463reg.h and ims332.h as pointed by Klaus Klein.
1998-10-30 00:18:16 +00:00
2cb48d6c4e
Add support for macppc.
...
Very special thanks to Itsumi Tsutsui for his invaluable collaboration.
1998-10-28 20:39:45 +00:00
026fcd0ce2
RCS Id police, canonicalize multiple-inclusion protection symbol names.
1998-10-28 16:26:01 +00:00
675a2afc89
- Brooktree Bt459 135 MHz Monolithic CMOS 256x64 Color Palette RAMDAC.
...
- Brooktree Bt431 Monolithic CMOS 64x64 Pixel Cursor Generator.
- Inmos IMS G332 Color Video Controller.
1998-10-28 04:10:36 +00:00
56066ad5fb
Add media list, media list count, and default media arguments to
...
ne2000_attach().
1998-10-28 00:13:47 +00:00
3a9e6f3a29
Define a "page 3", used on some chips which emulate a dp8390, but also
...
provide extensions.
1998-10-27 23:34:17 +00:00
3a7a7177cc
Update for changes to NCR5380_READ() and NCR5380_WRITE().
1998-10-26 04:44:04 +00:00
8ed7c47c7a
In order for the SCI_CLR_INTR() and SCI_BUSY() macros to work, we
...
must actually use the softc pointer provided. Adjust NCR5380_READ()
and NCR5380_WRITE() appropriately.
1998-10-26 04:42:47 +00:00
d4e6677111
Replace architecture-dependent tag/handle field names with
...
architecture-independent versions.
1998-10-25 23:48:29 +00:00
fab7faf6a4
Fix typo
1998-10-25 18:49:18 +00:00
906db1e920
PR/6274: John Ruschmeyer: Add support for the ncr53c80 driver on the i386.
1998-10-25 17:26:41 +00:00
88d1b8138c
If WDC_DIAGNOSTIC is defined, check in wdcstart() that we are called at
...
splbio.
1998-10-21 09:12:46 +00:00
a2386d4325
fully implement soft callback usage
1998-10-20 22:18:13 +00:00
ce89209d42
when transmitting we cannot totally fill the circular buffer (i.e.
...
we can't use up all of the remaining sc->txslot[chan].bfree free
bytes) because that would cause the circular buffer read pointer
to become equal to the write pointer, thus signaling 'empty buffer'
to the hardware and stopping the transmitter. spotted and fixed
by Kenjiro Cho <kjc@csl.sony.co.jp>
1998-10-20 17:53:54 +00:00
794fadcf0a
Donc reset the disk state to 0 in wd.c, set a flag which will cause it
...
to be reset to 0 at wdcstart(). This fixes a race condition between
normal I/O and wdioclt().
1998-10-20 17:00:26 +00:00
3ebe847640
Stopgap fix for stupid pasto. Fix for the BAHSOFTCOPY case will be provided
...
after more sleep.
1998-10-19 22:00:14 +00:00
96a0812fd8
Kill an extra printf("\n").
1998-10-15 11:38:04 +00:00
d2d873481a
pcic_wait_ready(): If we didn't get READY, print out the current status.
1998-10-15 04:04:43 +00:00
6413810bf3
Stop spurious lpt messages from being printed -- approved by fvdl.
1998-10-14 20:09:06 +00:00
773dc968ad
Remove some debugging printf
1998-10-14 13:28:47 +00:00
de1d4ba9b0
Change the way uCode is loaded into board LRAM, to let it work on macppc.
1998-10-13 22:57:26 +00:00
e8322de657
Add a new drive flag, DRIVE_MODE, set when the drive properly reported its
...
PIO/DMA modes. Don't try a SET_FEATURE if it didn't report its mode.
1998-10-13 15:18:46 +00:00
7545a59b8c
In debug message, always print controller:channel:drive
1998-10-13 15:02:41 +00:00
ff0134b99f
Properly separate DEBUF_XFERS and DEBUG_FUNCS: DEBUF_XFERS is for data
...
transfers (may be called often), where DEBUG_FUNCS is for setup functions
(not used for normal contitions).
1998-10-13 09:33:59 +00:00
da5d0a6f17
pciide.c: don't define WDCDEBUG, so it compiles on alpha. Correct a bogon
...
in the printing of DMA mode (piix3/4 only)
others: set the debug_mask to 0, so that debug messages are turned off by
default but can be easily turned on.
Reset drive_flags to 0 for unconfigured devices, so that they are ignored
later. For configured devices, reset state to 0 after probe/attach.
1998-10-13 08:59:45 +00:00
39c8c94fa5
make it compile with GWETHER again.
1998-10-13 08:33:05 +00:00
19fddaeeb5
Merge bouyer-ide
1998-10-12 16:09:10 +00:00
29d472f53d
Garbage-collect the open_target_lu and close_target_lu entry points from
...
struct scsipi_adapter; they were not used.
Add a scsipi_ioctl entry point to struct scsipi_adapter. This will be
used to issue ioctl commands to the host adapters.
Inspired by PR #6090 , from Matt Jacob.
1998-10-10 00:28:28 +00:00
423c1d8dd3
Make AdvanSys narrow driver compile on BIG_ENDIAN machines.
...
Thanks to Izumi Tsutsui
1998-10-06 14:44:21 +00:00
11bc54234b
In epic_init(), attempt to start output on the interface once the interface
...
is initialized.
1998-10-05 19:10:22 +00:00
d9cb3415b1
Fix typo (pointed by Matthias Drochner).
1998-10-02 20:00:28 +00:00
1693b8b4a6
minor changes to console handling in zstty_attach():
...
-wait 20ms between printf() and reconfiguring the hardware
-set cn_tab->cn_dev here because this is the place where the real minor
number is known
1998-10-01 18:52:42 +00:00
bf8783afa4
Fix the receive length so it includes the extra bytes in the fddi_header.
1998-09-28 20:37:12 +00:00
43b462df88
Insert the FDDI control bytes in pdq_ifstart before we load the dmamap
...
and dmasync the data. Fix pdq_os_receive_pdu to use PDQ_OS_HDR_OFFSET
instead of PDQ_RX_FC_OFFSET.
1998-09-28 18:01:43 +00:00
a1528c368d
Fix transmit handling (this also should speed up transmits
...
slightly).
1998-09-28 17:13:54 +00:00
b2a68e14db
Change sources to be KNF
1998-09-26 19:53:34 +00:00
da0a3e615e
Add support for AdvanSys Ultra Wide boards ABP-9xxUW
1998-09-26 16:09:32 +00:00
c6ccd1d83f
Remove Wide boards references
...
Adjust copyright
At this time this driver support the following AdvanSys boards:
- ABP-9xx
- ABP-9xxU
- ABP-9xxUA
1998-09-26 16:02:56 +00:00
7d6c07a559
Use the data32iot and data32ioh members of the wdc_attachment_data
...
structure for 32 bit transfers.
Test for 32 bit capability on data transfers currently restricted to 16 bit
only.
1998-09-22 00:27:51 +00:00
962edcdc03
Add data32iot and data32ioh members to the wdc_attachment_data structure.
...
This bus space tag and handle is used for 32 bit data transfers i.e.
when WDC_CAPABILITY_DATA32 is enabled as the 32 bit data register may
not be part of the standard drive registers.
1998-09-22 00:21:16 +00:00
0b10e1ddab
Parallel port support routines.
1998-09-21 21:26:51 +00:00
ad921921e4
Add softserial to the alpha port. This significantly improved PPP
...
throughput on com ports.
1998-09-21 00:33:16 +00:00
08e1d890a4
Changes so that BPF readers will get the data in fddi packet aligned along
...
normal boundaries. This makes tcpdump much happier.
1998-09-20 02:36:08 +00:00
935fbed4fe
Make sure data in FDDI packets are aligned nicely (for alpha, etc.)
1998-09-19 21:21:25 +00:00
1dac5b5291
Several changes, including some stub fibre target mode stuff. Establish
...
a slightly different fibre startup (print ALPA now too). Change
the way that return values from dma setup is done. Make debug messages
out of some queue overflow situations. Turn PORT LOGGED OUT into
Selection Timeout equivlaent. On isp_restart actions don't blow off
the commands with HBA_BOTCH (XS_DRIVER_STUFFUP) - set them with HBA_BUSRESET
(which is defined as XS_DRIVER_STUFFUP until someone decides whether
the suggested change to the midlayer NetBSD is worthy of inclusion).
1998-09-17 23:05:46 +00:00
a0a31568e8
cleanup header to be just NetBSD, roll rev, change QDEPTH to QAVAIL macro
1998-09-17 22:52:54 +00:00
0e0010df41
cleanup header to be just NetBSD
1998-09-17 22:52:14 +00:00
cb787c768d
add some target mode definitions
1998-09-17 22:51:54 +00:00
24717f3c3a
cleanup header to be just NetBSD
1998-09-17 22:50:53 +00:00
95807e512a
Garbage collect unused 3rd parameter to comprobe1().
1998-09-16 21:30:58 +00:00
7aa4d4483e
Revert the last change: returning COMPLETE is clearly the wrong thing to do
...
if we weren't polling to begin with.
1998-09-16 05:36:35 +00:00
0af57c2461
Correct a serious problem that affects at least front ends that can only
...
use PIO (or equivalent) code to do asynchronous transfers: In
ncr5380_scsi_cmd(), test to see if the request has been completed after
the call to ncr5380_sched(), and return COMPLETE if so. This avoids
going into an infinite loop in scsipi_execute_xs() while waiting for an
interrupt to trigger completion of the transfer... which, of course,
never happens, since it's already done.
1998-09-14 05:56:14 +00:00
32f42fe1e9
Make sure all voices are deallocated on close.
1998-09-13 04:41:34 +00:00
ea4898c76c
Add arc as a target platform.
1998-09-11 19:39:28 +00:00
9539399333
Add support for passing device quirks from the attachment routine,
...
and add support for a NO_EXTRA_RESETS quirk (required by the TEAC
IDE Card/II, which the Vaio uses).
1998-09-10 19:24:45 +00:00
4a1ccd2fe7
turn into a debug message an ABOUT F/W failure. Add ISPCTL_UPDATE_PARAMS isp_control case
1998-09-10 17:10:27 +00:00
9ce5ae6b97
Protect Debugger() call a'la uha driver. PR #6070 , Gary D. Duzan.
1998-09-09 05:28:58 +00:00
d1fba4e7e5
Don't use M_WAITOK to allocate the ring buffer; we could be in interrupt
...
context. Reported by Lennart Augustsson.
1998-09-09 05:17:53 +00:00
a79310ba38
Major reworking of initialization code, addition of NVRAM reading, usage
...
of device speed updating, etc... A lot of FC and other case statement
handling. Whew. Too much to really detail here.
1998-09-08 07:28:50 +00:00
6e2341ae63
Roll major revision. Change some definitions around. Add more current device
...
state stuff. Make DPARM flags full 16 bits (no shifting needed) and add
the 2 new ones for the 7.55 f/w.
1998-09-08 07:27:04 +00:00
542648bf0e
Move all ASYNC definitions here (after all, they're mailbox registers).
...
Clarify FC initialization control block. Add macros for setting WWN
into same. Add a wad more definitions in this area.
1998-09-08 07:24:23 +00:00
170521610e
Add more ASYNC event codes here. Add NVRAM definitions.
1998-09-08 07:22:06 +00:00
c0eabb441f
add case for going from probetime to runtime speeds
1998-09-08 07:19:58 +00:00
9752520872
roll revision, change default tagging to simple tags
1998-09-08 07:18:56 +00:00
b871ab5f2c
Use the new "%b" format for the various control register bits.
1998-09-06 21:39:33 +00:00
344ed1eaef
Assign copyright to TNF.
1998-09-05 14:20:01 +00:00
ba8c6b9828
arm32 now supports soft serial interrupts.
1998-09-05 04:25:35 +00:00
a3ee69c87a
Split SMC chipset ARCnet driver into
...
- machine independent chip driver, in dev/ic/smc90cx6.c/...reg.h,...var.h,
using bus_space methods
- ZBUS frontend in arch/amiga/dev/if_bah_zbus.c
- added IPL_SOFTNET to arch/amiga/include/intr.h, for this
Implementing the ISA bus frontend is left as an exercise to the reader.
1998-09-02 22:32:06 +00:00
380e88d4f0
Adjust some comments.
1998-09-01 22:56:00 +00:00
6693724a83
Changed inaccurate comment on the sc_freq member of the driver's softc
...
structure. The frequency is represented in MHz rather than Hz. [PR/6805]
1998-09-01 22:22:03 +00:00
fec2fa9e43
Typo in device Id mask.
1998-09-01 21:04:43 +00:00
d58173741d
kill the last remnants of __BROKEN_INDIRECT_CONFIG. (only the pica port
...
used it, and it's non-working and apparently slated for replacement.)
1998-08-31 22:28:04 +00:00
860867bfec
macro argument protection.
1998-08-31 11:13:10 +00:00
73b946e04e
LSI64854 DMA engine driver.
...
Currently used by Lance Ethernet and NCR SCSI front-ends on sparc/sparc64.
1998-08-29 21:42:03 +00:00
17759893b0
Add rcs id
1998-08-29 13:44:49 +00:00
370a38c007
Add braces to make egcs happy.
1998-08-28 20:03:10 +00:00
f3bfb08d45
When determining the default media on the Vortex/Boomerang, don't pick
...
the full-duplex variant. XXX We should check the EEPROM for "default to
full-duplex".
1998-08-28 18:16:02 +00:00
b1447741da
Nuke Dprintf; fix formats.
1998-08-28 08:59:14 +00:00
dd0709d28d
Add selected `%b' bits.
1998-08-27 20:05:11 +00:00
142bff0170
Add missing entries and make it slightly more verbose.
1998-08-27 19:53:02 +00:00
b3279eb3dc
Move a few prototypes.
...
Whitespace cleanup.
1998-08-27 18:45:12 +00:00
fc397afa14
debug level 0
1998-08-26 15:06:37 +00:00
d9e417cde9
Add AdvanSys 930U and 940U SCSI controllers
1998-08-26 14:13:58 +00:00
6633896a67
Do some renaming of registers and make sure we get sound in both
...
channels on OPL3.
1998-08-26 13:08:10 +00:00
bb3c56652c
Make the OPL driver turn on the sound on sound cards that require it.
...
That makes it much more likely that we get any sound. DUH!
1998-08-26 12:10:22 +00:00
bc21c243cd
For non-MII Vortex/Boomerang, set full-duplex in the MAC CONTROL register
...
in epsetmedia() if full-duplex is selected (new feature on these cards!)
On MII Boomerangs, set the full-duplex bit in MAC CONTROL in the statchg
callback from the MII layer. Should fix full-duplex on these cards.
1998-08-26 01:32:41 +00:00
19b759c2e4
Define the full-duplex bit in the W3 MAC CONTROL register.
1998-08-26 01:29:03 +00:00
d4ec33b5f0
The new MI part of the AD1848 driver.
1998-08-25 22:36:40 +00:00
54bf4389f9
egcs brace warning
1998-08-24 02:34:44 +00:00
f2ff59edc5
Change debug output.
1998-08-22 22:54:11 +00:00
177621555f
remove sparc hack: there's a bus.h now.
1998-08-20 11:42:55 +00:00
1f007a13cc
Cast bus_size_t to u_long in printf() args.
1998-08-20 11:42:13 +00:00
b43fc64da6
Registers for the Brooktree Bt463 RAMDAC.
1998-08-18 07:43:09 +00:00
6bfd748b46
First-crack at RoadRunner (3c574-TX 10/100Mbps PCMCIA). Doens't yet use
...
any of the RoadRunner speed hacks.
1998-08-17 23:20:39 +00:00
cd09067eb4
* Redo the way the way the MIDI driver attaches to audio devices.
...
* Improve the midisyn layer a little.
* Add a driver for the Yamaha OPL[23] FM synths.
The opl driver is not finished yet; it sounds pretty awful.
For some strange reason I cannot get any FM sound from my SB64 cards,
but a regular SB16 works fine.
1998-08-17 21:16:09 +00:00
a1ac68819f
Assign my copyrights to TNF.
1998-08-17 00:26:32 +00:00
2a5371253c
splnet() is not appropriate for everyone. Raise and lower SPL via
...
macros defined in pdqvar.h
1998-08-16 03:44:42 +00:00
cbcc3cfa46
Oops, back out something that I didn't intend to commit.
1998-08-16 01:16:57 +00:00
d07b3639a4
Assign my copyrights to TNF.
1998-08-15 17:47:15 +00:00
c2f2b0d431
RoadRunner has a bit in Reset Options that must be set to enable the MII.
...
Define that bit.
1998-08-15 16:50:07 +00:00
a0aca43d11
Reset Options is in Window 3; correct a comment.
1998-08-15 16:47:30 +00:00
479d8b25bf
The 3c515 (Corkscrew) and 3c574 (RoadRunner) have their Window 1 registers
...
offset! Define an inline function to compute the Window 1 register offset
and use it.
1998-08-15 16:20:51 +00:00
31a3d86b80
Define the Corkscrew chipset - used by the 3c515 ISA 10/100mbps cards.
1998-08-15 16:15:40 +00:00
62b1bf3e2e
Assign my copyrights to TNF.
1998-08-15 10:51:16 +00:00
6dc903202f
Assign my copyrights to TNF.
1998-08-15 10:10:47 +00:00
7d0d0346fa
Define the RoadRunner FIFO count registers.
1998-08-15 08:28:22 +00:00
ccf620bfab
Define the 3Com "RoadRunner" chipset; like the Boomerang, but for PCMCIA.
...
No DMA is wired up, it has a shared memory interface, and a FIFO buffer
which can be used to speed up PIO transfers. (The latter two are
PCMCIA-specific speed hacks to deal hide the performance lossage from
using a PCMCIA->PCI bridge internally.)
1998-08-15 07:28:04 +00:00
cc8a78e783
Assign my copyrights to TNF.
1998-08-15 04:42:42 +00:00
b2827b9d36
Assign copyright to TNF.
1998-08-15 04:16:55 +00:00
6d3d8a1350
Make copyright notices with my name consistent.
1998-08-15 03:02:31 +00:00
cea8e0a23f
explicitely select the master before trying to access its registers
1998-08-14 20:39:04 +00:00
a2dd74ed79
Merge paddr_t changes into the main branch.
1998-08-13 02:10:37 +00:00
b170caf730
Completely rewrite media selection. Add support for the MII/PHY on
...
the 3Com 3c905-TX and 3c905-T4. Fix handling of the MII on the
3c595-MII and 3c597-MII (can't talk to the PHYs on these cards; just
use "manual" for the external MII port).
Fixes kern/4782 (Chris Demetriou).
1998-08-12 18:51:52 +00:00
53907fe5a1
Support Cabletron Ethernet card, from John Marohn in PR 5762.
1998-08-12 07:19:09 +00:00
7b8168e675
Adapt to new MII code.
1998-08-11 00:12:52 +00:00
b1bb9aa490
Oops. We do still need to set t_dev in the first open part of zsopen,
...
so we get ttyXX vs cuaXX right. Leave the initialization in attach.
1998-08-09 18:36:45 +00:00
26e55969e4
Initialize the struct tty's t_dev field at attach rather than first open.
...
The attach routine calls zsparam if we're setting up the console, and
zsparam needs this field to tell which zstty to set up. Otherwise, we
set up zstty0 even if it's not the console!
1998-08-09 06:17:07 +00:00
e2686d0a1b
Use splnet, not splimp.
1998-08-08 23:51:39 +00:00
06761b1ed4
Merge in a register definition mentioned only in passing in one place in
...
the Zilog docs.
1998-07-31 05:08:38 +00:00
0d257affa0
Add some constants.
1998-07-28 16:03:49 +00:00
daed8d7ce1
Fix obsolete code in waiting for calibration on the ad1848.
...
(Sigh, the ad1848 driver should be rewritten.)
1998-07-28 12:13:34 +00:00
c5e450957a
add (hopefully) bus-independent hd64570 driver, for the Hitachi serial
...
controller chip.
1998-07-26 03:26:57 +00:00
3d545acb51
Overload the generic "copyrows" function by a private one which implents
...
a "fast scroll" by setting the display start in memory.
(Only implemented for "scroll up" because this is more used. "scroll down"
is easy to add.)
This moves the semantics of "copyrows" to something like "moverows";
the contents of the new visible lines at the bottom is undefined.
The emulations can live without the original "copy" semantics.
1998-07-24 16:20:14 +00:00
7764b57db5
allow the displayed area to start anywhere in display memory,
...
add a "dispoffset" variable to control this
1998-07-24 16:12:18 +00:00
e81ad8e2c6
add random generator hook
1998-07-24 13:42:29 +00:00
6dc9297499
remove unneeded typecast
1998-07-24 13:41:52 +00:00
458ba64f3a
Slight variation on last; be a bit more zealous about fixing up the
...
clock source. Now, when my EtherPower II locks up, it eventually recovers!
(Geez, I'd like to know why it does this, and only apparently in 10mb/s mode).
1998-07-23 17:37:38 +00:00
9a59784f70
Split the LANCE driver into a part specific to the classic chip with
...
24-bit DMA addresses, and an independant part.
Implement support for the 32-bit mode in the newer (79c9xx) chips.
1998-07-21 17:26:45 +00:00
9e17315847
Write the CLOCK TEST bit *at least 16 consecutive times* during initialization,
...
as the clock source will be set incorrectly otherwise! From SMC Application
Note 7-15. Thanks to Christoph Badura for the pointer!
1998-07-20 21:39:05 +00:00
79f77cc9ce
The mystery bit in the TEST register is actually the CLOCK TEST bit.
1998-07-20 20:45:06 +00:00
6054d626f9
Switching dev/ic/lpt.c to use spllpt() instead of spltty(). It doesn't use
...
tty structures, and on some machines (namely the DraCo internal lpt, and some
multi-i/o boards for Amigas and DraCos), tying spltty to the pretty high printer
interupt level would hurt serial performance.
On all affected ports but Amiga, spllpt() has been defined in machine/intr.h
to be spltty(), thus preserving old behaviour. Portmasters are encouraged to
change is, if they feel something else is better (e.g., one of its own were
possible).
1998-07-18 21:27:25 +00:00
a455ce7531
Locking is now in the outer framework for isp_init/isp_reset- this allows
...
us to call isp_reset/isp_init internally with impunity.
Rename isp_phoenix to isp_restart and make it global. Clean it up a tad.
If we get an ASYNC_SYSTEM_ERROR code in isp_intr, call isp_restart and
return- the f/w is toasted at this point (usually), so we have to bring
things back to a known state.
In isp_mboxcmd, when we don't see the HOST_INT bit go clear, try and
find out if the isp is trying to tell us something and try again. This
may avoid a potential deadlock where the previous mailbox command hasn't
been cleared by the ISP.
In isp_init don't try and get device parameters if we already have them-
this typically doesn't work if we're in the middle of an isp_restart.
1998-07-18 21:10:16 +00:00
9afa921bc1
roll core version number and add a global visible isp_restart function
1998-07-18 21:06:20 +00:00
35c8fecf3a
fix headers
1998-07-18 21:05:39 +00:00
b85bf24ed5
fix bogus comments
1998-07-18 21:05:04 +00:00
576988940f
roll revision
1998-07-18 21:04:46 +00:00
e8f976016e
Some major thrashing to handle building for other than NetBSD.
...
There is one change of note- build a list of completing commands in
ispintr and then say you're done- this avoids some re-entrancy issues
that had surfaced.
1998-07-15 19:50:16 +00:00
d96bd50c07
NetBSD OS specific routines and definitions.
1998-07-15 19:44:04 +00:00
2ba4227a6e
from OpenBSD:
...
date: 1998/06/24 20:05:03; author: deraadt; state: Exp; lines: +4 -4
initialization error; joel@wmi.com
(affects debug printout only)
1998-07-07 14:13:51 +00:00
88139fff5a
Never, ever, ever, ever include "assym.h" in C source file.
1998-07-07 02:02:53 +00:00
011f2bda08
defopt NS, NSIP.
1998-07-05 06:49:00 +00:00
fe484937cf
defopt LLC
1998-07-05 03:14:41 +00:00
8db0fcdbf7
defopt CCITT.
1998-07-05 02:12:22 +00:00
3751946b97
defopt INET, NETATALK.
1998-07-05 00:51:04 +00:00
466e784ee1
defopt DDB.
1998-07-04 22:18:13 +00:00
205c293676
Patches from Justin that handle some REV B AIC7880 problems
1998-07-03 23:45:10 +00:00
7931fb2172
Fix spalling misteak: indentify -> identify
1998-06-30 00:08:32 +00:00
3f10af182d
do the charcter mapping in a separate function
1998-06-26 21:05:20 +00:00
88e3d10d30
mapping tables for IBM character set
1998-06-26 21:00:27 +00:00
dbe5213b11
Split arch/sparc/dev/amd7930.c into:
...
* MI sys/dev/ic/{am7930.c,am7930var.h} chipset driver
* sparc frontend.
Presere revision history (this time).
TODO: bus.h'ify, and padded register mappings.
1998-06-24 11:09:23 +00:00
b40ead2c73
Split sparc am7930 driver into sparc attach and "MI" sys/dev/ic/am7930
...
chipset driver. Needs bus'ifying and register-access.
1998-06-24 10:52:53 +00:00
d64d1a0381
defopt a bunch of AHC specific options
1998-06-22 20:02:54 +00:00
3127da532a
Add register definitions for the ns8477 floppy controller. This is a superset
...
of the nec765.
1998-06-21 18:48:12 +00:00
bf42a9e321
adapt to wscons changes, treat incoming characters always as ISO
...
(ie, convert to IBM)
1998-06-20 21:55:05 +00:00
0fb233923b
do the former at one more place
1998-06-17 20:48:02 +00:00
39452d9720
avoid sign extension if a character >=128 is passed
1998-06-17 20:44:16 +00:00
651b44e211
Rework the way kernel include files are installed. In the new method,
...
as with user-land programs, include files are installed by each directory
in the tree that has includes to install. (This allows more flexibility
as to what gets installed, makes 'partial installs' easier, and gives us
more options as to which machines' includes get installed at any given
time.) The old SYS_INCLUDES={symlinks,copies} behaviours are _both_
still supported, though at least one bug in the 'symlinks' case is
fixed by this change. Include files can't be build before installation,
so directories that have includes as targets (e.g. dev/pci) have to move
those targets into a different Makefile.
1998-06-12 23:22:30 +00:00
96840772f5
reserve the VGA BIOS area (but don't worry if it fails)
1998-06-12 18:41:01 +00:00
ab7bc85ff7
Pull in <sys/timepps.h> here so that other things that include comvar.h
...
will compile.
1998-06-11 02:01:58 +00:00
bbc2d1522a
PPS support from April, reworked and extended to match the PPS-API
...
Internet Draft (draft-mogul-pps-api-02.txt).
1998-06-10 12:06:23 +00:00
de7be831ac
Make this compile with the recent ISA DMA changes.
1998-06-10 10:24:13 +00:00
4ad627c09b
Do the unaligned buffer fixup without copying data, more-or-less lifted
...
from the Shark CS8900 driver.
1998-06-10 01:15:50 +00:00
be62e9cb1b
Nuke __BROKEN_INDIRECT_CONFIG.
1998-06-09 07:35:06 +00:00
e41f7ca1b8
Make this build w/ EGCS.
1998-06-08 07:11:51 +00:00
e12c6ddaf2
No need for an explicitly-sized type for sc_flags.
1998-06-08 07:06:41 +00:00
b91a2393c1
the AM7990 is a controller, not a "card"; repair a misleading diagnostic.
1998-06-07 08:08:20 +00:00
573196b6ba
Check for the ether broadcast address in promiscuous mode (PR#5527).
1998-06-04 20:35:44 +00:00
770c4bfb9d
Make this compile with WDDEBUG
1998-06-04 02:27:33 +00:00
5852faaf84
Device driver for the SMC 83c170 Ethernet PCI Integrated Controller (EPIC/100)
...
used in the SMC EtherPower II.
Media control isn't yet supported, due to some MII infrastructure
problems which I hope to address soon. This isn't a huge deal, since
the PHY defaults to auto-negotiate mode.
Also, the device just programs the multicast hash table to accept all
multicast, to avoid a hardware bug that causes the multicast address
filter to lose in 10Mb/s mode. This bug will be fixed in a more sane
way once the media control issues are dealt with.
1998-06-02 01:29:41 +00:00
b84dbbb37c
Put definitions and subroutines needed for all PC display adapters
...
(MGA/GCA and compatibles) into global headers / source files.
Let the VGA driver use them.
1998-05-28 16:48:40 +00:00
769e4e6e81
Another bug fix (clear transmit done before trying to queue more transmits).
1998-05-28 03:07:49 +00:00
dd77920e3e
Only enable transmit done interrupts when output ring is full.
1998-05-27 14:01:02 +00:00
5fb5017c94
Fix syncing of consumer block.
1998-05-27 01:17:53 +00:00
5442fd5420
If we have an NCR53CF9x (indicated by the front-end by setting a flag
...
in the softc's new "features" word), set FSCSI bit in CFG3 if the sync
period is <= 200ns, or clear it otherwise.
1998-05-26 23:17:34 +00:00
1f8a0caf0a
Success! With these changes, the DEFTA now under NetBSD/pmax!!
1998-05-26 15:33:16 +00:00
2d80e4786e
Verify the driver work if PDQ_NO_BUS_DMA is defined.
1998-05-25 21:24:21 +00:00
05f603434f
More pmax coherency stuff. Getting close..
1998-05-24 22:37:23 +00:00
144c41e986
Fix dmamap leakages. fix transmit bug. fix receive bugs. fix mips
...
coherency problems.
1998-05-24 21:40:05 +00:00
18319c0048
Changes so that these compile on NetBSD/alpha as well as NetBSD/i386.
1998-05-23 18:32:29 +00:00
9eb77bf49a
Change 21040 modes slightly. Prevent infinite autosense loop of 21143 that
...
is not connected. Make TULIP_STS_LINFAIL only valid for chips with that
status bit defined.
1998-05-22 18:50:59 +00:00
cfbb5f3f21
Add bus_dma(9) support for the DEFxA FDDI driver
1998-05-21 20:44:02 +00:00
74545baf39
Add a Yamaha OPL3-SA3 driver and clean up all AD1848 drivers.
...
Submitted by Constantine Sapuntzakis <csapuntz@reeducation-labor.lcs.mit.edu>
and originally written for OpenBSD.
1998-05-20 16:19:41 +00:00
11c8871c83
Erase spurious end-of-comment.
1998-05-20 16:06:56 +00:00
9299239520
Cirrus Logic CD1190 parallel port chip definitions; from Iain Hibbert.
1998-05-20 14:47:36 +00:00
9c1918e458
Add CD1400_PAR_FIFO_SIZE.
1998-05-20 00:03:11 +00:00
051be14326
Correct copyright date.
1998-05-17 16:46:06 +00:00
7bd61ed6be
needed for VGA text attributes
1998-05-14 23:11:03 +00:00
95bdb660ed
Simple screen attribute handling for wscons.
...
The graphics device driver passes a "default attribute" for normal text
output to the wscons framework. If the emulation module needs more
attributes (for different "renditions") it can allocate them via a
callback.
For now, only the "sun" emulation makes use of it.
1998-05-14 20:49:55 +00:00
1442b419df
Fix alignment crashes on Alphas...
1998-05-14 18:24:00 +00:00
e72782a137
Driver for Essential Communications' RoadRunner HIPPI (800 Mb/sec network)
...
card. With some modification, this could probably also work for their
Gigabit Ethernet card based on the same chipset...
1998-05-14 00:04:57 +00:00
d2db996158
Fix some arithmetics lossage on typeless pointers.
1998-05-07 21:13:23 +00:00
128cb933b4
there is an (unimportant) difference between 1020 && 1020A
1998-05-05 22:10:36 +00:00
2eb37a4e87
When changing power, wait enough to keep timing constraint
...
described in PCMCIA specification.
1998-05-05 00:37:24 +00:00
6ba2c64ae6
Eliminate the degenerate loop in `ncr53c9x_intr()'. Retain the delay heuristic
...
it implemented under the label `shortcut:' and only use it in these
cases: (1) after successful re-relection, (2) after receiving command-complete
status, and (3) during message-in handshake.
1998-05-04 14:47:48 +00:00
0d3d41fa21
Allocate SCSI message buffers in ncr53c9x_attach(), with a provision
...
for front-ends to override the allocation to avoid alignment
handling in their DMA engines. Note that that ncr53c9x_msgout()
can request a 1 byte DMA transfer that would be difficult to break up.
1998-05-04 11:11:24 +00:00
53d3aa940b
Sync with recent change made to bha.c by mjacob:
...
Cute buglet: you can end up with zero CCBs if there were no targets
seen by the adapter. Always leave a minimum so the adapter can
finish attaching- it may be there w/o targets for a reason.
1998-04-29 01:02:44 +00:00
1acc8b53b5
Cute buglet: you can end up with zero CCBs if there were no targets
...
seen by the adapter. Always leave a minimum so the adapter can
finish attaching- it may be there w/o targets for a reason.
1998-04-28 23:57:53 +00:00
41d55197b4
In wdcintr(), add a catch-all case so that this will compile if no
...
children are configured.
1998-04-28 18:36:07 +00:00
0b2694152f
Update copyright.
1998-04-26 06:03:23 +00:00
eddaea2d53
In LBA mode, always use the `total capacity' count, rather than calculating
...
the capacity based on the c/h/s numbers. In fact, don't use the c/h/s
numbers for much of anything.
For ATA-4 drives or later, always use LBA mode, since it's now required.
Collectively, this allows >8GB disks (like the 12GB Bigfoot) to work.
1998-04-26 05:28:23 +00:00
68096acabd
From Robert V. Baron:
...
Compute the disk block addr at command queing time rather than exec time.
This fix a bug which could lead to data corruption on disk: when a command
was reexecuted after an error condition (from wdcunwedge), the partition
offset was re-added to the block addr, leading to a transfert at the wrong
disk block.
This should fix the problem reported by some laptop's users, where the
first disk read after a suspend/resume returned garbage.
1998-04-23 13:30:39 +00:00
7ba46a56e0
Correct defifintion of the WDCE_MCR and WDCE_ABRT bits: they have been
...
inverted since the begining.
This doesn't change anything, as these bits are not used in the driver.
1998-04-23 10:37:01 +00:00
9663e5f689
Make probe message more consistent with usual practice.
...
From "Soren S. Jorvang" <soren@t.dk>.
1998-04-20 20:58:05 +00:00
112b5de402
Use a stream method for AHC_OUTSL when possible.
1998-04-16 07:13:57 +00:00
d3febbb5aa
Do endian swaps where appropriate. This is currently dependent on 'BYTE_ORDER'
...
since the driver only supports little endian busses.
1998-04-16 07:12:43 +00:00
eda73f204f
The "mi" TGA driver. It's still not of much use on anything but alpha
...
because it depends on initialization by the firmware.
Further, an mi mmap() is needed...
1998-04-15 20:16:30 +00:00
fe60e74148
Add hooks to make exclusive hardware locking possible. This is necessary
...
to make the driver suitable for the atari falcon.
1998-04-07 19:51:57 +00:00
0391896c27
Avoid namespace pollution.
1998-04-07 16:35:42 +00:00
b80f703f77
Fix problem with promicuously received packets. (ie. give them to bpf
...
but not fddi_input).
1998-04-07 13:32:06 +00:00
be4108fec1
Replace direct `sparc_bus_map()' calls with bus space map method.
1998-03-30 14:21:38 +00:00
b70a7e1752
Didn't compile: add variable `bit' removed by mycroft.
1998-03-30 10:35:03 +00:00
d4da63c6c3
Eliminate cs_heldchar. It is not necessary in my version of the driver.
1998-03-30 02:41:21 +00:00
8f597a8744
Oops; make the table const.
1998-03-29 22:36:42 +00:00
a6b8b01d96
Use a 4-bit table to speed up the CRC even further, without increasing the
...
code size too much.
1998-03-29 22:34:27 +00:00
fe7f32954b
Optimize the address CRC routines a bit.
1998-03-29 22:08:03 +00:00
9264961c87
add a short delay (5ms) after ATAPI software reset is done, suggested by
...
Soren S. Jorvang <soren@t.dk>. Apparently some devices Really Want this.
1998-03-27 19:32:15 +00:00
57ca254137
some minor debug printout changes
1998-03-24 23:37:53 +00:00
47d94e4676
fix typo
1998-03-23 16:57:21 +00:00
fc27ffd92c
update some debugging stuff- also turn off possible ULTRA mode for 1020s
1998-03-22 22:02:29 +00:00
ff0635ab25
Fix error in previous change.
1998-03-22 19:36:52 +00:00
3a43fe7109
initial import of VGA driver backend for use with the new wscons code
1998-03-22 15:11:49 +00:00
2b5f7351d2
Split Fujitsu MB9696x based ethernet card driver into bus
...
dependent/independent code and bus.h'fied.
1998-03-22 04:25:36 +00:00
f6dba67570
Read up to 32 bytes. The ESCC *needs* 8, and it doesn't hurt to leave some
...
slop in case there are clone chips with a deeper FIFO.
1998-03-22 02:36:02 +00:00
2bb5067e13
Move the code to wait for carrier on a tty into a common function, since it
...
depends only on device-independent state bits.
Implement SunOS-style `dialout' devices.
1998-03-22 00:55:37 +00:00
019508faee
Well, I don't have a Cyclades board, but I needed the alpha kernels
...
to compile. I made the changes that seemed to make sense tracking the
shift from TS_WOPEN to tp->t_wopen- but they may be wrong. I wasn't
subscribed to tech-kern so I missed the discussion, and C. Hannum
was not particularly enlightening. Sorry if this isn't quite right.
1998-03-21 23:26:15 +00:00
69fe6f242f
Account for changed bus attachment scheme.
1998-03-21 20:11:30 +00:00
834a8ac07a
Fix pasto.
1998-03-21 04:31:10 +00:00
fd620ebb32
Replace TS_WOPEN with t_wopen, per mail on tech-kern.
1998-03-21 04:29:29 +00:00
16566cda09
Remove a bogus initializer.
1998-03-21 04:27:58 +00:00
2ada4b4af1
Replace TS_WOPEN with t_wopen, per mail on tech-kern.
1998-03-21 04:02:47 +00:00
d2551d5b3f
Use bus-dma functions.
1998-03-16 15:36:17 +00:00
6dcfc62169
KNF last change
1998-03-05 22:56:18 +00:00
84c6b9dbd7
Make zs_iflush not loop indefinitly. Some Mac PowerBooks lie about having
...
two SCC channels, and can get stuck in an infinite loop. This change
stops after flushing 4 bytes. Might need upping to 8 bytes if we support
85230 ESCC's.
Idea bounced off of scottr & gwr
1998-03-05 22:03:34 +00:00
713692a2b5
For the Rx:Tx split message change "(undefined)" to "3:5".
1998-03-04 18:10:03 +00:00
5bc7459ebd
Remove `NEW_I82586'
1998-02-28 01:14:57 +00:00
472a1973af
Remove `_NEW_I82586' tag; all drivers using this file have been converted.
1998-02-28 01:07:45 +00:00
bouyer