A new "arm32_dma_range" structure now describes a DMA window, with
a system address base, bus address base, and length. In addition to
providing info about which memory regions are legal for DMA, the new
structure provides address translation support, as well.
As before, if a tag does not list any ranges, then all addresses are
considered valid, and no DMA address translation is performed.
This allows us to remove a large chunk of code which was duplicated and
tweaked slightly (to do the address translation) from the stock ARM
bus_dma in the XScale IOP and ARM Integrator ports.
Test compiled on all ARM platforms, test booted on Intel IQ80321 and Shark.
the virtual address for each DMA segment, just cache a pointer to the
original buffer/buftype used to load the DMA map, and use that. This
lets us shrink the bus_dma_segment_t down from 12 bytes to 8, and the
cache flushing is also more efficient.
Tested on an i80321 -- changes to others are mechanical.
NULL for root PCI busses. For busses behind a bridge, it points to
a persistent copy of the bridge's pcitag_t. This can be very useful
for machine-dependent PCI bus enumeration code.
* Implement a machine-dependent pci_enumerate_bus() for sparc64 which
uses OFW device nodes to enumerate the bus. When a PCI bus that is
behind a bridge is attached, pci_attach_hook() allocates a new PCI
chipset tag for the new bus and sets it's "curnode" to the OFW node
of the bridge. This is used as a starting point when enumerating
that bus. Root busses get the OFW node of the host bridge (psycho).
* Garbage-collect "ofpci" and "ofppb" from the sparc64 port.
I/O processors:
* The i80200 and the i80321 have the same CPU ID, so split the
CPU_XSCALE option into CPU_XSCALE_80200 and CPU_XSCALE_80321
options, and don't let them both be defined at the same time.
XXX May want to revisit this in the future.
* Split some registers common between the i80200 and i80321 into
<arm/xscale/xscalereg.h>.
* Rename a few existing functions.
interrupt code for the IQ80310 board support package.
XXX The Integrator board support package still uses the old-style
arm32 interrupt code, so some compatibility hacks have been added
for it. When the Integrator uses new-style interrupts, those hacks
can go away.
* Track which process (XXX really, vmspace) owns the mapping. When
we sync the map, if the mapping doesn't belong to the kernel or to
the current process (XXX really, vmspace), then no cache fobbing
is necessary, since the cache is Wb-Inv'd on context switch (XXX need
to revisit this when we support FCSE).
* Be smarter about which cache operation we do when sync'ing the map:
- PREREAD -- Invalidate D$ (XXX right now, we actually do Wb-Inv)
- PREWRITE -- Write-back D$ (note, we do NOT invalidate here)
- PREREAD|PREWRITE -- Wb-Inv D$
More work is needed here. In particular, a version for CPUs
with write-through caches should be provided, to eliminate
the write-back steps (which are noops on such CPUs, but skipping
two branches would be nice).
only the Secondary PCI bus (it's the only bus which can have a
device space hidden from any PCI host on the Primary bus).
Also, use the bus number from the PPB businfo register seecondary bus
field rather than hard-coding "1".
DMA via the Secondary Inbound window, for now. Will probably
need to revisit this at some point.
Require that the board-specific i80312 front-end slice off a
subregion for the memory controller before calling i80312_attach(),
and fix a bug in the IQ80310 front-end that caused the Secondary
Inbound window to be configured incorrectly.
just basic Inbound and Outbound window setup is done, PCI configuration
space access (not quite working yet), and I/O and Memory space routines
so far.
