Commit Graph

1084 Commits

Author SHA1 Message Date
bouyer 5f088e0243 wdcstart(): Re-add support of shared xfer queue across multiple channels
(was lost between 1.44 and 1.45).
1998-11-29 17:34:49 +00:00
thorpej 96da1decd9 Fix media probe on non-MII chips. 1998-11-29 01:40:46 +00:00
thorpej 18e7f69220 Update for new pcmciabus attribute. 1998-11-27 21:59:18 +00:00
augustss 9726cfd1fb Make the copyright header conform to the NetBSD template. 1998-11-25 22:17:06 +00:00
kenh 1f676cda09 Implement the AT_READREG flag. This is needed for the CHECK POWER MODE
ATA command (among others).
1998-11-23 23:02:11 +00:00
wrstuden f0559087e0 Changes to deal with mac serial ports having clock sources on DCD or CTS.
- When doing a first open, don't enable receive & status interupts before
	the MD layer has had a chance to set things up.
- Enable logic to only enable DCD/CTS interupts if we are looking for/
	expecting interupts on those pins. Disable otherwise.
- in zs_param, only pass up the state of ZSRR0_DCD if we have enabled
	interupts on that pin.

Henry Hotz (<hotz@jpl.nasa.gov>) and Greg walsh <gwalsh@artec.com> have
tried these changes to get certain printers from hanging at boot. They
work in a 1.3.2 kernel for Greg.
1998-11-23 22:10:09 +00:00
drochner 3e38051bc5 in wdc_softc: access the per-channel data via a pointer array instead of
an array of fixed-sized channel_softc elements. This way IDE controllers
which more than 1 channel (pciide) can extend the channel data easily
for private needs.
To avoid the double dereference at runtime, change the argument of
wdcstart() to the channel data pointer instead of the array index.
1998-11-21 15:41:41 +00:00
kml ba30effcf8 Changes to support a HIPPI Framing Protocol device, which allows raw
HIPPI packets to be written without having to go through the network
stack.
1998-11-20 04:12:57 +00:00
thorpej 4ba3417429 Implement reference counting for ATA adapters. 1998-11-20 01:22:37 +00:00
kenh 396aa17f77 Sigh, my bad. Check for chp->wdc being NULL before trying to deference it.
(I didn't realize the ISA wdc front-end doesn't fill in chp->wdc).
1998-11-19 22:50:21 +00:00
thorpej 5f0577babc Adapt to the new scsipi_adapter interface. 1998-11-19 21:43:00 +00:00
thorpej afc84158d1 Back out revision 1.40. That change couldn't have POSSIBLY worked, since
when wdcprobe() is called, the wdc_softc pointer in the channel_softc
hasn't even been intialized!
1998-11-19 19:52:42 +00:00
kenh 1461c4fb20 __wdccommand_done() needs to call wdcstart(), otherwise you can run
into deadlocks when using wdc_exec_command().
1998-11-19 04:07:54 +00:00
thorpej 3e086bd63d Add support for detaching "com" instances. 1998-11-18 23:58:52 +00:00
kenh 58932a8415 Quirk out the first test in the beginning of wdcprobe(); the Vaio
CD-ROM drive doesn't like it for some reason.
1998-11-18 19:12:08 +00:00
thorpej 1d0f24882d Now that the *_activate() functions don't do things which are attachment
specific, move them into the chipset drivers.
1998-11-18 18:34:52 +00:00
thorpej dd6750820c Expose the "enable" and "disable" functions so that the front-ends can
access them.
1998-11-17 20:25:00 +00:00
bouyer b64b7c2964 New IDE xfer flag: C_SENSE, set by the ATAPI back-end sense info needs to
be retrieved.
1998-11-17 14:14:52 +00:00
thorpej 0c3ca7b31e Finish implementing interrupt-driven card insertion and removal support.
- Deactivate the card on removal and queue a REMOVAL event for the socket's
event thread to finish the detach.
- Queue an INSERTION event for the socket's event thread on insertion.

Implement a few missing infrastructure pieces to support this.

Hot swapping of PCMCIA cards now "works".  (Not quite; things like network
devices need changes for their respestive subsystems.  These changes are
coming soon...)
1998-11-17 08:49:11 +00:00
thorpej fc44652721 Implement a kernel thread per PCMCIA socket to handle card insertion and
removal events.
1998-11-16 22:41:01 +00:00
thorpej d2afdb5b59 Fix some whitespace lossage, canonicalize some media names. 1998-11-16 19:13:31 +00:00
mycroft 8146c925da If we get a TX interrupt with no packets buffered, ignore it. This can occur
if the chip is reset while transmitting.

XXX
This occurs at boot time because the SIOCADDMULTI always resets the interface
when adding the `all hosts groups' -- usually while the ARP packet is being
transmitted.  All drivers should be fixed to not reset the interface when
changing the multicast filter, if possible.
1998-11-12 13:18:26 +00:00
bouyer 1e71e76d6c - clearify the boot messages (features supported vs features used). Thanks to
Havard Eidnes for his complains about this :)
- fix some typo in comments
- hoppefully better detection of drives reporting bogus PIO modes.
1998-11-11 19:38:27 +00:00
msaitoh 21e1b057bc Sorry, I forgot to revert "#if 0". 1998-11-09 07:01:47 +00:00
veego 2749e8b74a We don't need the pci headers here. 1998-11-08 22:02:25 +00:00
kenh e58cf6b359 Add definitions for the ATA power management commands 1998-11-05 22:49:09 +00:00
msaitoh 37bbf03777 fix pcic_chip_socket_enable() to works on more machines. 1998-11-05 07:55:48 +00:00
fvdl 7b10c3e7e4 Add the 'ex' driver, a DMA driver for 3Com 90x and 90xB cards. Rename
constants from EP_ to ELINK_ since they're now used in the ex driver as well.
1998-11-04 00:29:28 +00:00
thorpej cd7f7eff85 Code common to RealTek 8019 and 8029 NE2000-compatible Ethernet chips.
Includes media selection support and support for Full-duplex.
1998-10-31 00:44:33 +00:00
thorpej fa97a53c11 Multiple inclusion protection. 1998-10-31 00:31:43 +00:00
thorpej 992f2906ba Move the RTL8029 register definitions to <dev/ic/rtl80x9reg.h>, and add
the registers/bits present in the RTL8019 (ISA version).
1998-10-31 00:27:41 +00:00
nisimura 074bc27605 - Add filenames for VDAC/cursor sprite hardware descriptions; bt431reg.h,
bt459reg.h, bt463reg.h and ims332.h as pointed by Klaus Klein.
1998-10-30 00:18:16 +00:00
dante 2cb48d6c4e Add support for macppc.
Very special thanks to Itsumi Tsutsui for his invaluable collaboration.
1998-10-28 20:39:45 +00:00
kleink 026fcd0ce2 RCS Id police, canonicalize multiple-inclusion protection symbol names. 1998-10-28 16:26:01 +00:00
nisimura 675a2afc89 - Brooktree Bt459 135 MHz Monolithic CMOS 256x64 Color Palette RAMDAC.
- Brooktree Bt431 Monolithic CMOS 64x64 Pixel Cursor Generator.
- Inmos IMS G332 Color Video Controller.
1998-10-28 04:10:36 +00:00
thorpej 56066ad5fb Add media list, media list count, and default media arguments to
ne2000_attach().
1998-10-28 00:13:47 +00:00
thorpej 3a9e6f3a29 Define a "page 3", used on some chips which emulate a dp8390, but also
provide extensions.
1998-10-27 23:34:17 +00:00
scottr 3a7a7177cc Update for changes to NCR5380_READ() and NCR5380_WRITE(). 1998-10-26 04:44:04 +00:00
scottr 8ed7c47c7a In order for the SCI_CLR_INTR() and SCI_BUSY() macros to work, we
must actually use the softc pointer provided.  Adjust NCR5380_READ()
and NCR5380_WRITE() appropriately.
1998-10-26 04:42:47 +00:00
scottr d4e6677111 Replace architecture-dependent tag/handle field names with
architecture-independent versions.
1998-10-25 23:48:29 +00:00
christos fab7faf6a4 Fix typo 1998-10-25 18:49:18 +00:00
christos 906db1e920 PR/6274: John Ruschmeyer: Add support for the ncr53c80 driver on the i386. 1998-10-25 17:26:41 +00:00
bouyer 88d1b8138c If WDC_DIAGNOSTIC is defined, check in wdcstart() that we are called at
splbio.
1998-10-21 09:12:46 +00:00
is a2386d4325 fully implement soft callback usage 1998-10-20 22:18:13 +00:00
chuck ce89209d42 when transmitting we cannot totally fill the circular buffer (i.e.
we can't use up all of the remaining sc->txslot[chan].bfree free
bytes) because that would cause the circular buffer read pointer
to become equal to the write pointer, thus signaling 'empty buffer'
to the hardware and stopping the transmitter.  spotted and fixed
by Kenjiro Cho <kjc@csl.sony.co.jp>
1998-10-20 17:53:54 +00:00
bouyer 794fadcf0a Donc reset the disk state to 0 in wd.c, set a flag which will cause it
to be reset to 0 at wdcstart(). This fixes a race condition between
normal I/O and wdioclt().
1998-10-20 17:00:26 +00:00
is 3ebe847640 Stopgap fix for stupid pasto. Fix for the BAHSOFTCOPY case will be provided
after more sleep.
1998-10-19 22:00:14 +00:00
bouyer 96a0812fd8 Kill an extra printf("\n"). 1998-10-15 11:38:04 +00:00
mycroft d2d873481a pcic_wait_ready(): If we didn't get READY, print out the current status. 1998-10-15 04:04:43 +00:00
perry 6413810bf3 Stop spurious lpt messages from being printed -- approved by fvdl. 1998-10-14 20:09:06 +00:00
dante 773dc968ad Remove some debugging printf 1998-10-14 13:28:47 +00:00
dante de1d4ba9b0 Change the way uCode is loaded into board LRAM, to let it work on macppc. 1998-10-13 22:57:26 +00:00
bouyer e8322de657 Add a new drive flag, DRIVE_MODE, set when the drive properly reported its
PIO/DMA modes. Don't try a SET_FEATURE if it didn't report its mode.
1998-10-13 15:18:46 +00:00
bouyer 7545a59b8c In debug message, always print controller:channel:drive 1998-10-13 15:02:41 +00:00
bouyer ff0134b99f Properly separate DEBUF_XFERS and DEBUG_FUNCS: DEBUF_XFERS is for data
transfers (may be called often), where DEBUG_FUNCS is for setup functions
(not used for normal contitions).
1998-10-13 09:33:59 +00:00
bouyer da5d0a6f17 pciide.c: don't define WDCDEBUG, so it compiles on alpha. Correct a bogon
in the printing of DMA mode (piix3/4 only)
others: set the debug_mask to 0, so that debug messages are turned off by
default but can be easily turned on.
Reset drive_flags to 0 for unconfigured devices, so that they are ignored
later. For configured devices, reset state to 0 after probe/attach.
1998-10-13 08:59:45 +00:00
msaitoh 39c8c94fa5 make it compile with GWETHER again. 1998-10-13 08:33:05 +00:00
bouyer 19fddaeeb5 Merge bouyer-ide 1998-10-12 16:09:10 +00:00
thorpej 29d472f53d Garbage-collect the open_target_lu and close_target_lu entry points from
struct scsipi_adapter; they were not used.

Add a scsipi_ioctl entry point to struct scsipi_adapter.  This will be
used to issue ioctl commands to the host adapters.

Inspired by PR #6090, from Matt Jacob.
1998-10-10 00:28:28 +00:00
dante 423c1d8dd3 Make AdvanSys narrow driver compile on BIG_ENDIAN machines.
Thanks to Izumi Tsutsui
1998-10-06 14:44:21 +00:00
thorpej 11bc54234b In epic_init(), attempt to start output on the interface once the interface
is initialized.
1998-10-05 19:10:22 +00:00
matt d9cb3415b1 Fix typo (pointed by Matthias Drochner). 1998-10-02 20:00:28 +00:00
drochner 1693b8b4a6 minor changes to console handling in zstty_attach():
-wait 20ms between printf() and reconfiguring the hardware
-set cn_tab->cn_dev here because this is the place where the real minor
 number is known
1998-10-01 18:52:42 +00:00
matt bf8783afa4 Fix the receive length so it includes the extra bytes in the fddi_header. 1998-09-28 20:37:12 +00:00
matt 43b462df88 Insert the FDDI control bytes in pdq_ifstart before we load the dmamap
and dmasync the data.  Fix pdq_os_receive_pdu to use PDQ_OS_HDR_OFFSET
instead of PDQ_RX_FC_OFFSET.
1998-09-28 18:01:43 +00:00
matt a1528c368d Fix transmit handling (this also should speed up transmits
slightly).
1998-09-28 17:13:54 +00:00
dante b2a68e14db Change sources to be KNF 1998-09-26 19:53:34 +00:00
dante da0a3e615e Add support for AdvanSys Ultra Wide boards ABP-9xxUW 1998-09-26 16:09:32 +00:00
dante c6ccd1d83f Remove Wide boards references
Adjust copyright

At this time this driver support the following AdvanSys boards:
- ABP-9xx
- ABP-9xxU
- ABP-9xxUA
1998-09-26 16:02:56 +00:00
mark 7d6c07a559 Use the data32iot and data32ioh members of the wdc_attachment_data
structure for 32 bit transfers.
Test for 32 bit capability on data transfers currently restricted to 16 bit
only.
1998-09-22 00:27:51 +00:00
mark 962edcdc03 Add data32iot and data32ioh members to the wdc_attachment_data structure.
This bus space tag and handle is used for 32 bit data transfers i.e.
when WDC_CAPABILITY_DATA32 is enabled as the 32 bit data register may
not be part of the standard drive registers.
1998-09-22 00:21:16 +00:00
pk 0b10e1ddab Parallel port support routines. 1998-09-21 21:26:51 +00:00
matt ad921921e4 Add softserial to the alpha port. This significantly improved PPP
throughput on com ports.
1998-09-21 00:33:16 +00:00
matt 08e1d890a4 Changes so that BPF readers will get the data in fddi packet aligned along
normal boundaries.  This makes tcpdump much happier.
1998-09-20 02:36:08 +00:00
matt 935fbed4fe Make sure data in FDDI packets are aligned nicely (for alpha, etc.) 1998-09-19 21:21:25 +00:00
mjacob 1dac5b5291 Several changes, including some stub fibre target mode stuff. Establish
a slightly different fibre startup (print ALPA now too). Change
the way that return values from dma setup is done. Make debug messages
out of some queue overflow situations. Turn PORT LOGGED OUT into
Selection Timeout equivlaent. On isp_restart actions don't blow off
the commands with HBA_BOTCH (XS_DRIVER_STUFFUP) - set them with HBA_BUSRESET
(which is defined as XS_DRIVER_STUFFUP until someone decides whether
the suggested change to the midlayer NetBSD is worthy of inclusion).
1998-09-17 23:05:46 +00:00
mjacob a0a31568e8 cleanup header to be just NetBSD, roll rev, change QDEPTH to QAVAIL macro 1998-09-17 22:52:54 +00:00
mjacob 0e0010df41 cleanup header to be just NetBSD 1998-09-17 22:52:14 +00:00
mjacob cb787c768d add some target mode definitions 1998-09-17 22:51:54 +00:00
mjacob 24717f3c3a cleanup header to be just NetBSD 1998-09-17 22:50:53 +00:00
is 95807e512a Garbage collect unused 3rd parameter to comprobe1(). 1998-09-16 21:30:58 +00:00
scottr 7aa4d4483e Revert the last change: returning COMPLETE is clearly the wrong thing to do
if we weren't polling to begin with.
1998-09-16 05:36:35 +00:00
scottr 0af57c2461 Correct a serious problem that affects at least front ends that can only
use PIO (or equivalent) code to do asynchronous transfers:  In
ncr5380_scsi_cmd(), test to see if the request has been completed after
the call to ncr5380_sched(), and return COMPLETE if so.  This avoids
going into an infinite loop in scsipi_execute_xs() while waiting for an
interrupt to trigger completion of the transfer... which, of course,
never happens, since it's already done.
1998-09-14 05:56:14 +00:00
mycroft 32f42fe1e9 Make sure all voices are deallocated on close. 1998-09-13 04:41:34 +00:00
jonathan ea4898c76c Add arc as a target platform. 1998-09-11 19:39:28 +00:00
kenh 9539399333 Add support for passing device quirks from the attachment routine,
and add support for a NO_EXTRA_RESETS quirk (required by the TEAC
IDE Card/II, which the Vaio uses).
1998-09-10 19:24:45 +00:00
mjacob 4a1ccd2fe7 turn into a debug message an ABOUT F/W failure. Add ISPCTL_UPDATE_PARAMS isp_control case 1998-09-10 17:10:27 +00:00
thorpej 9ce5ae6b97 Protect Debugger() call a'la uha driver. PR #6070, Gary D. Duzan. 1998-09-09 05:28:58 +00:00
thorpej d1fba4e7e5 Don't use M_WAITOK to allocate the ring buffer; we could be in interrupt
context.  Reported by Lennart Augustsson.
1998-09-09 05:17:53 +00:00
mjacob a79310ba38 Major reworking of initialization code, addition of NVRAM reading, usage
of device speed updating, etc... A lot of FC and other case statement
handling. Whew. Too much to really detail here.
1998-09-08 07:28:50 +00:00
mjacob 6e2341ae63 Roll major revision. Change some definitions around. Add more current device
state stuff. Make DPARM flags full 16 bits (no shifting needed) and add
the 2 new ones for the 7.55 f/w.
1998-09-08 07:27:04 +00:00
mjacob 542648bf0e Move all ASYNC definitions here (after all, they're mailbox registers).
Clarify FC initialization control block. Add macros for setting WWN
into same. Add a wad more definitions in this area.
1998-09-08 07:24:23 +00:00
mjacob 170521610e Add more ASYNC event codes here. Add NVRAM definitions. 1998-09-08 07:22:06 +00:00
mjacob c0eabb441f add case for going from probetime to runtime speeds 1998-09-08 07:19:58 +00:00
mjacob 9752520872 roll revision, change default tagging to simple tags 1998-09-08 07:18:56 +00:00
pk b871ab5f2c Use the new "%b" format for the various control register bits. 1998-09-06 21:39:33 +00:00
christos 344ed1eaef Assign copyright to TNF. 1998-09-05 14:20:01 +00:00
mark ba8c6b9828 arm32 now supports soft serial interrupts. 1998-09-05 04:25:35 +00:00
is a3ee69c87a Split SMC chipset ARCnet driver into
- machine independent chip driver, in dev/ic/smc90cx6.c/...reg.h,...var.h,
  using bus_space methods
- ZBUS frontend in arch/amiga/dev/if_bah_zbus.c
- added IPL_SOFTNET to arch/amiga/include/intr.h, for this
Implementing the ISA bus frontend is left as an exercise to the reader.
1998-09-02 22:32:06 +00:00
pk 380e88d4f0 Adjust some comments. 1998-09-01 22:56:00 +00:00
jeremy 6693724a83 Changed inaccurate comment on the sc_freq member of the driver's softc
structure.  The frequency is represented in MHz rather than Hz. [PR/6805]
1998-09-01 22:22:03 +00:00
pk fec2fa9e43 Typo in device Id mask. 1998-09-01 21:04:43 +00:00
cgd d58173741d kill the last remnants of __BROKEN_INDIRECT_CONFIG. (only the pica port
used it, and it's non-working and apparently slated for replacement.)
1998-08-31 22:28:04 +00:00
pk 860867bfec macro argument protection. 1998-08-31 11:13:10 +00:00
pk 73b946e04e LSI64854 DMA engine driver.
Currently used by Lance Ethernet and NCR SCSI front-ends on sparc/sparc64.
1998-08-29 21:42:03 +00:00
dante 17759893b0 Add rcs id 1998-08-29 13:44:49 +00:00
thorpej 370a38c007 Add braces to make egcs happy. 1998-08-28 20:03:10 +00:00
thorpej f3bfb08d45 When determining the default media on the Vortex/Boomerang, don't pick
the full-duplex variant.  XXX We should check the EEPROM for "default to
full-duplex".
1998-08-28 18:16:02 +00:00
pk b1447741da Nuke Dprintf; fix formats. 1998-08-28 08:59:14 +00:00
pk dd0709d28d Add selected `%b' bits. 1998-08-27 20:05:11 +00:00
pk 142bff0170 Add missing entries and make it slightly more verbose. 1998-08-27 19:53:02 +00:00
pk b3279eb3dc Move a few prototypes.
Whitespace cleanup.
1998-08-27 18:45:12 +00:00
pk fc397afa14 debug level 0 1998-08-26 15:06:37 +00:00
dante d9e417cde9 Add AdvanSys 930U and 940U SCSI controllers 1998-08-26 14:13:58 +00:00
augustss 6633896a67 Do some renaming of registers and make sure we get sound in both
channels on OPL3.
1998-08-26 13:08:10 +00:00
augustss bb3c56652c Make the OPL driver turn on the sound on sound cards that require it.
That makes it much more likely that we get any sound.  DUH!
1998-08-26 12:10:22 +00:00
thorpej bc21c243cd For non-MII Vortex/Boomerang, set full-duplex in the MAC CONTROL register
in epsetmedia() if full-duplex is selected (new feature on these cards!)

On MII Boomerangs, set the full-duplex bit in MAC CONTROL in the statchg
callback from the MII layer.  Should fix full-duplex on these cards.
1998-08-26 01:32:41 +00:00
thorpej 19b759c2e4 Define the full-duplex bit in the W3 MAC CONTROL register. 1998-08-26 01:29:03 +00:00
pk d4ec33b5f0 The new MI part of the AD1848 driver. 1998-08-25 22:36:40 +00:00
tv 54bf4389f9 egcs brace warning 1998-08-24 02:34:44 +00:00
augustss f2ff59edc5 Change debug output. 1998-08-22 22:54:11 +00:00
pk 177621555f remove sparc hack: there's a bus.h now. 1998-08-20 11:42:55 +00:00
pk 1f007a13cc Cast bus_size_t to u_long in printf() args. 1998-08-20 11:42:13 +00:00
thorpej b43fc64da6 Registers for the Brooktree Bt463 RAMDAC. 1998-08-18 07:43:09 +00:00
thorpej 6bfd748b46 First-crack at RoadRunner (3c574-TX 10/100Mbps PCMCIA). Doens't yet use
any of the RoadRunner speed hacks.
1998-08-17 23:20:39 +00:00
augustss cd09067eb4 * Redo the way the way the MIDI driver attaches to audio devices.
* Improve the midisyn layer a little.
* Add a driver for the Yamaha OPL[23] FM synths.
  The opl driver is not finished yet; it sounds pretty awful.

For some strange reason I cannot get any FM sound from my SB64 cards,
but a regular SB16 works fine.
1998-08-17 21:16:09 +00:00
mycroft a1ac68819f Assign my copyrights to TNF. 1998-08-17 00:26:32 +00:00
matt 2a5371253c splnet() is not appropriate for everyone. Raise and lower SPL via
macros defined in pdqvar.h
1998-08-16 03:44:42 +00:00
thorpej cbcc3cfa46 Oops, back out something that I didn't intend to commit. 1998-08-16 01:16:57 +00:00
mycroft d07b3639a4 Assign my copyrights to TNF. 1998-08-15 17:47:15 +00:00
thorpej c2f2b0d431 RoadRunner has a bit in Reset Options that must be set to enable the MII.
Define that bit.
1998-08-15 16:50:07 +00:00
thorpej a0aca43d11 Reset Options is in Window 3; correct a comment. 1998-08-15 16:47:30 +00:00
thorpej 479d8b25bf The 3c515 (Corkscrew) and 3c574 (RoadRunner) have their Window 1 registers
offset!  Define an inline function to compute the Window 1 register offset
and use it.
1998-08-15 16:20:51 +00:00
thorpej 31a3d86b80 Define the Corkscrew chipset - used by the 3c515 ISA 10/100mbps cards. 1998-08-15 16:15:40 +00:00
mycroft 62b1bf3e2e Assign my copyrights to TNF. 1998-08-15 10:51:16 +00:00
mycroft 6dc903202f Assign my copyrights to TNF. 1998-08-15 10:10:47 +00:00
thorpej 7d0d0346fa Define the RoadRunner FIFO count registers. 1998-08-15 08:28:22 +00:00
thorpej ccf620bfab Define the 3Com "RoadRunner" chipset; like the Boomerang, but for PCMCIA.
No DMA is wired up, it has a shared memory interface, and a FIFO buffer
which can be used to speed up PIO transfers.  (The latter two are
PCMCIA-specific speed hacks to deal hide the performance lossage from
using a PCMCIA->PCI bridge internally.)
1998-08-15 07:28:04 +00:00
mycroft cc8a78e783 Assign my copyrights to TNF. 1998-08-15 04:42:42 +00:00
mycroft b2827b9d36 Assign copyright to TNF. 1998-08-15 04:16:55 +00:00
mycroft 6d3d8a1350 Make copyright notices with my name consistent. 1998-08-15 03:02:31 +00:00
drochner cea8e0a23f explicitely select the master before trying to access its registers 1998-08-14 20:39:04 +00:00
eeh a2dd74ed79 Merge paddr_t changes into the main branch. 1998-08-13 02:10:37 +00:00
thorpej b170caf730 Completely rewrite media selection. Add support for the MII/PHY on
the 3Com 3c905-TX and 3c905-T4.  Fix handling of the MII on the
3c595-MII and 3c597-MII (can't talk to the PHYs on these cards; just
use "manual" for the external MII port).

Fixes kern/4782 (Chris Demetriou).
1998-08-12 18:51:52 +00:00
scottr 53907fe5a1 Support Cabletron Ethernet card, from John Marohn in PR 5762. 1998-08-12 07:19:09 +00:00
thorpej 7b8168e675 Adapt to new MII code. 1998-08-11 00:12:52 +00:00
wrstuden b1bb9aa490 Oops. We do still need to set t_dev in the first open part of zsopen,
so we get ttyXX vs cuaXX right. Leave the initialization in attach.
1998-08-09 18:36:45 +00:00
wrstuden 26e55969e4 Initialize the struct tty's t_dev field at attach rather than first open.
The attach routine calls zsparam if we're setting up the console, and
zsparam needs this field to tell which zstty to set up. Otherwise, we
set up zstty0 even if it's not the console!
1998-08-09 06:17:07 +00:00
mycroft e2686d0a1b Use splnet, not splimp. 1998-08-08 23:51:39 +00:00
wrstuden 06761b1ed4 Merge in a register definition mentioned only in passing in one place in
the Zilog docs.
1998-07-31 05:08:38 +00:00