df6962b659
fix previous byte-order fix the correct way
...
(from Zdenek Salvet <salvet@horn.ics.muni.cz>)
1996-11-09 23:02:27 +00:00
155ab54456
New-style crash dump format requires a slighty different interpretation of
...
the variable `dumpsize' (used by savecore(8)) and that the CPU specific data
gets dumped first.
Also, squash a typo that prevented the crash dump to be shifted towards the
end of the swap partition. In fact, the entire dumpconf() routine has been
redone, mostly by pasting large chunks from the alpha port.
1996-11-09 23:02:17 +00:00
0217df3897
Define new-style kernel crash dump format.
1996-11-09 22:52:22 +00:00
1fcf303e02
Config file for the Hades.
1996-11-09 22:32:10 +00:00
5d058e1b22
Add the Hades floppy driver.
1996-11-09 22:30:55 +00:00
795ac1e7e2
Count in the Hades floppy driver.
1996-11-09 22:28:53 +00:00
76cc53af70
Hades floppy driver.
1996-11-09 22:27:25 +00:00
5ffce6ff81
fix uninit'd variable [detected by charles]
1996-11-09 22:27:22 +00:00
d1e1b34b28
Move the vector-table to kernel data space, so we can write to it.
1996-11-09 22:24:49 +00:00
51d658e787
Check to make sure that ASCBase is accessable before claiming that we
...
have an Apple Sound Chip. Make sure that we have configured the device
before allowing accesses to ASC memory. Among other things, this
prevents the 660AV and 840AV from getting a kernel bus error when trying
to beep on the console.
1996-11-09 17:26:26 +00:00
f75767628e
Dump out type, code, v on panic for no pcb in trap().
1996-11-09 15:36:14 +00:00
cabd6ddfa0
- new lpt driver, contributed by Steve Woodford <steve@mctavish.demon.co.uk>
...
- added 1.1 and 1.2 compat to VME147 config file
1996-11-09 03:52:51 +00:00
04550d40b6
netbsd pr#2919 (jukka.partanen@research.nokia.com):
...
- fix compiler warnings
1996-11-09 03:43:29 +00:00
0f3c7ec18c
netbsd pr#2918 (jukka.partanen@research.nokia.com):
...
- fix up netnatm so that it compiles with new warning flags (and
install headers)
1996-11-09 03:26:25 +00:00
63b98e6bb7
add ss/uk
1996-11-08 22:40:51 +00:00
5049f4d106
add ch/rd(chr)/ss/uk devices as requested by mycroft, plus some minor clean up
1996-11-08 22:00:42 +00:00
ee87cfab39
apply netbsd pr#2598 from der mouse:
...
everything before the beginning of the "a" partition on a disk
is read-only except when accessed via RAW_PART. (a problem if
"a" isn't at the front of the disk). pointed out by pk back
in july.
1996-11-08 20:50:55 +00:00
976b43fd61
Fix panic on mkdir.
...
Thanks to Dave Huang for finding the bug.
1996-11-08 15:51:49 +00:00
8481cf5e5b
Adapt to changes in the bus-interface; bus_[mem|io] -> bus_space. Thanks Jason.
1996-11-08 14:21:02 +00:00
fb386a941d
pba_bc -> pba_pc
1996-11-08 14:18:20 +00:00
758e7a3708
Adapt to the change in the floppy minor-number sceme.
1996-11-08 14:17:08 +00:00
489c388d79
Clear d0 before using it to turn off the 040 MMU. Clearing d0 was a side-effect
...
of the code removed in my previous commit.
1996-11-08 14:15:36 +00:00
626210d212
Move the definition for the floppy device from std.atari to the different
...
config files because the Hades needs another driver for it.
1996-11-08 14:12:19 +00:00
f0873310e2
Another quirky cdrom drive ; pr kern/2917
1996-11-08 05:06:55 +00:00
eb8718eafb
* Pull up files from lib/libc/arch/ns32/string.
...
* DEFS.h and setjmp.S are no longer in use.
1996-11-07 07:36:05 +00:00
10af6d961f
* We get bcopy from libkern.o now.
1996-11-07 07:34:02 +00:00
6ed1a51b35
* libkern.o already has bcopy.o. Link it in front of libsa.a.
1996-11-07 07:33:55 +00:00
a95805b41f
* Define the ALTENTRY macro.
1996-11-07 07:33:28 +00:00
ee011c080d
* The pc532 port is now using the mi ramdisk driver.
...
* Use the mi version of ns_cksum.
1996-11-07 07:32:29 +00:00
5ca00f7293
* Cosmetic changes.
1996-11-07 07:32:21 +00:00
5596cf17ea
* Cosmetic changes.
...
* Configure LKM support.
* Remove filesystems that are normally not used.
* Configure SCSI-uk driver.
1996-11-07 07:32:18 +00:00
93811ddf97
* Cosmetic changes.
...
* Only FFS is needed for the install kernel.
* Configure the console to 8N1 (that's what the pc532's rom monitor uses).
* The install kernel doesn't need to know about CDROM drives.
* Use the new mi ramdisk.
1996-11-07 07:32:13 +00:00
7a27370327
* Cosmetic changes.
...
* Configure only NFS, FFS and LFS filesystems. All other filesystems are
modloadable.
* Configure SCSI-uk driver.
1996-11-07 07:32:10 +00:00
bc9eccaebb
* Cosmetic changes.
...
* Configure SCSI-uk driver.
1996-11-07 07:32:07 +00:00
1b92fb966e
* bcopy and bzero are part of libkern now.
1996-11-07 07:31:20 +00:00
752f0f5c9c
Fix typo; PR port-i386/2666.
1996-11-07 07:30:19 +00:00
dbaaf5e560
* rd_attach_hook/rd_open_hook. Stolen from sun3/dev/rd_root.c
1996-11-07 07:21:00 +00:00
ddb9815a80
* We are using the mi ramdisk driver now.
1996-11-07 07:20:37 +00:00
4ae217f7fa
* We are using the mi ncr driver now.
1996-11-07 07:20:29 +00:00
df2a490d8f
* Not in use for a very long time.
1996-11-07 07:20:28 +00:00
cab14d3b2b
* ntoh is part of libkern now.
1996-11-07 07:18:27 +00:00
c1e3a7db8d
* This not different from netns/ns_cksum.c. Delete this copy.
1996-11-07 07:18:26 +00:00
f0d6340cba
* Tell the vm system that kerneltext is mapped readonly. Stolen from
...
atari/atari/machdep.c.
1996-11-07 07:18:23 +00:00
8ea6b5f65c
* Add ch, ss and uk devices.
...
* Make lkms work.
1996-11-07 07:18:21 +00:00
eead8b9100
* bcopy is part of libkern now.
1996-11-07 07:18:19 +00:00
2051c0369d
If _REENTRANT is defined, define errno as a macro that calls the
...
__errno() function.
1996-11-07 06:04:05 +00:00
af29f79ed4
Fix WDDEBUG code; PR kern/1480.
1996-11-07 05:23:07 +00:00
89e06b9449
build manual page and install it in the right place.
1996-11-06 23:09:13 +00:00
050d4ebd12
NetBSD/alpha installboot manual page. Copied from the sparc and lightly
...
tweaked by Curt Sampson <cjs@portal.ca>, then largely redone by me.
1996-11-06 23:07:55 +00:00
8a3333b2a9
Fix an inconsistency that came in with Lite: setrq() was renamed to
...
setrunqueue(), but remrq() was never renamed. Rename remrq() to
remrunqueue().
1996-11-06 20:19:19 +00:00
ee08818e7a
Fix an inconsistency that came in with Lite: setrq() was renamed to
...
setrunqueue(), but remrq() was never renamed. Rename remrq() to
remrunqueue(). Also, move remrunqueue() prototype from vm/vm_extern.h
to sys/proc.h, so that it's in the same place as the setrunqueue() prototype
and other related prototypes.
1996-11-06 19:33:39 +00:00
092bb4bd47
Fixed type its NPPP not PPP.
1996-11-06 18:18:41 +00:00
1413ef1d07
Add an APM_NO_STANDBY option, which can be enabled by people whose BIOSes do
...
the wrong thing with standby mode (as some older ThinkPAD 701c BIOSes do, for
example.) Rename APM_NOIDLE to APM_NO_IDLE for consistency and "niceness,"
and error out (with a useful error message) if APM_NOIDLE is defined.
1996-11-06 18:09:43 +00:00
dce3bea50b
Add msconfig to SUBDIRS.
1996-11-06 15:35:47 +00:00
8d079317a6
pmap_changebit() no longer static.
1996-11-06 15:33:56 +00:00
f2501673f5
Prototytpe bus_mem_map/bus_mem_unmap functions.
1996-11-06 15:33:05 +00:00
44263b4564
Add the external drive to the standard setup.
1996-11-06 14:05:31 +00:00
5f28db13df
- Make it's behaviour on minor numbers identical to that of the Hades
...
floppy driver.
- Fixup format types in the debug-printf's
- Don't print empty lines on unconfigured drives.
- When a drive is detected, show it's default format.
---- Warning: minor numbers are shifted! ---
1996-11-06 14:03:15 +00:00
8bad301566
Re-arrange the order in which devices are scanned for a root filesystem.
...
It's really bogus to try a floppy before a harddisk.
1996-11-06 13:57:12 +00:00
37ae30708a
pmap_changebit() can no longer be static since the bus_mem* functions use
...
it.
1996-11-06 13:55:38 +00:00
bc03497d55
Add bus_mem_(un)map functions.
1996-11-06 13:53:35 +00:00
11a4058f20
Remove fdopen->Fdopen cruft. This is no longer necessary.
1996-11-06 13:51:49 +00:00
291d9eabda
These shouldn't have been imported...
1996-11-06 13:46:10 +00:00
e285606c68
mouse configuration, by Thomas Gerner.
1996-11-06 13:38:12 +00:00
19bb57bc5a
Add another broken CDROM. Fixes PR kern/2913.
...
Some misc. cleanup.
1996-11-06 05:50:31 +00:00
2241acdd09
vga_move_charset() shouldn't need XSERVER. Fixes port-i386/2904.
1996-11-06 05:28:49 +00:00
5c91907fb4
add options: EXEC_AOUT and EXEC_SCRIPT
1996-11-06 03:35:03 +00:00
34e2fb3bb6
Performance enhancement from Kirk McKusick <mckusick@McKusick.COM>:
...
When freeing an indirect block, there is no need to write it (synchronously,
no less!) before tossing it.
1996-11-06 03:02:59 +00:00
53945ccb19
Eliminate unsolicited spewage; PR #2108 .
1996-11-05 07:20:32 +00:00
047ae9a04d
LC III+/Performa 460 series use same vectors as the LC III.
...
Verified by Bob Nestor and Pete Nush.
1996-11-05 07:20:09 +00:00
697941357c
Eliminate unsolicited spewage; PR #2108 .
1996-11-05 07:17:23 +00:00
acaccdd747
make X support code dependent on XSERVER; PR port-i386/2528.
1996-11-05 06:21:25 +00:00
79b026a8f3
* Add command struct and modifier definitions for controlling the
...
ISA-compatible port space of PCI buslogic cards.
* Add call to bha_pci.c to disable the ISA-compatible ports of a PCI
device. The ISA-compatible ports are enabled by default, which
causes the card to be autoconfigured a second time as an ISA device,
which appears to deadlock the card.
* Change bha_cmd() to return the number of bytes it actually received
in response to a command, or -1 on error.
* Use heuristics (checking for bha-only registers, and checking the size
of the response to BHA_INQURE_EXTENDED) to bha_find, to make sure the
bha driver never matches an aha (Adaptec 1542 or compatible) device.
A single kernel should now boot on either Adaptec or BusLogic controllers,
provided we always probe for BusLogic devices before Adaptec devices,
but this has not yet been verified.
1996-11-05 03:04:28 +00:00
dd7ad6d7b8
Trim the name of the clock interrupt event counters. They were one byte
...
too long, causing a panic in DIAGNOSTIC kernels.
From Steve Woodford <steve@mctavish.demon.co.uk>, on the port-mvme68k
mailing list.
1996-11-05 02:51:03 +00:00
22523c6ffd
Update TODO list for lkm stuff
1996-11-05 02:34:24 +00:00
4f2a5a3b7d
remove deadfs and fifofs
1996-11-05 02:30:16 +00:00
0c69983b3e
remove the deadfs 'filesystem' from the lkm tree. This wasn't supposed to make
...
it in there anyway.
1996-11-05 02:29:29 +00:00
5b1de90fba
remove the fifo 'filesystem' from the lkm tree. This wasn't supposed to make
...
it in there anyway.
1996-11-05 02:27:19 +00:00
4620e80691
The copyright for this file has been assigned to the NetBSD Foundation
1996-11-04 23:04:43 +00:00
bbd25d0c38
- Move offset for 2nd scsi controller (Q900/Q950/WGS95) to 0x402
...
instead of 0x400.
- Restructure interrupt handling for more performance--continue to
read/write data as long as the device keeps us in a data xfer phase.
There is still a lot of room for speed improvement here. Perhaps it
lies is speeding up the interrupt path in general?
1996-11-04 21:20:01 +00:00
ffe8c5a2ab
Clean out some hacks left over from the old zs driver.
1996-11-04 16:16:09 +00:00
24620e1cd0
Rearrange wds_attach() to initialize DMA channel before setting to cascade
...
mode.
Fix silly error in -ASC case, pointed out by Niklas Hallqvist.
1996-11-03 16:20:31 +00:00
aa965ce3bf
Declare device `audio' at sbus.
1996-11-03 11:18:15 +00:00
9da963b048
Remove include of ncr96scsi.h, since it's now an artifact, and the
...
unused include of ncrscsi.h while we're here.
1996-11-02 07:18:53 +00:00
7685e9d70b
Improve reliability on my Q700, at least. Was getting the occasional
...
glitch--an extra byte on occasion.
1996-11-02 06:52:24 +00:00
92d21510ef
Drop in a sun4m version of AUDIO_SET_SWINTR; thanks to Nick Sayer for
...
the reminder.
1996-11-01 23:32:15 +00:00
33558b9e5f
Take care of the sun4m way of raising soft interrupts.
1996-11-01 23:30:09 +00:00
19b8bfdf3d
Declare device `audio' at sbus where it resides on Microsparc machines,
...
from Nick Sayer's PR#2908.
1996-11-01 23:15:51 +00:00
39379f9a46
Reset `sc_async' on device close.
1996-11-01 23:05:45 +00:00
236a28d49e
Make this compile without COMPAT_10 or _11
1996-10-31 01:16:57 +00:00
e4d7a09a2a
Bug fix for FSINCOS: wouldn't handle FPc == FP1 earlier.
1996-10-30 14:44:47 +00:00
a747e15eed
Add the 68060 bus control register to the list of known cpu superisor mode
...
registers.
1996-10-30 08:22:39 +00:00
be08e182af
In my earlier patch to the m68k fmovem disassembler, I repaired the register
...
naming for fmovem, while breaking it for fmove. We probably never will
see normal fmove in the kernel, nevertheless it should be corrected while
somebody remembers.
Besides, the correct patch is smaller and thus easier to verify than the
origininal one.
1996-10-30 08:11:21 +00:00
20c7b48d76
macs with scsibase offset 0x10000 from iobase use a SCSI CLK of 16.5MHz
...
(off PrimeTime)--all others appear to use 25MHz.
1996-10-30 05:39:21 +00:00
d5e58a6b20
Fix spelling error in panic. Double since of ResHndls[]. Use I/O kludge on
...
all systems, not just CLASSII--A bunch of Quadras apparently have hardcoded
I/O addresses in the ROMs, too.
1996-10-30 05:30:57 +00:00
de6db9f206
Added fix from Jasper Wallace th=at solves the bus hang ups caused when
...
DMA to the card going wrong.
1996-10-30 01:50:01 +00:00
f9d54194d5
Allow the config line "flags" to set bits in si_options.
...
Thanks to Jason Thorpe for the fix! (PR#1929)
1996-10-30 00:31:39 +00:00
769fe0dfca
Get rid of some cruft in the match function.
1996-10-30 00:24:32 +00:00
aac9e275ac
Add a "submatch" function to the obio bus driver so the children
...
of this driver can get rid of the cruft in their match functions.
1996-10-30 00:20:01 +00:00
2fcc0a64d2
Use explicit addresses for obio devices.
1996-10-30 00:17:10 +00:00
84d36b5c2f
Brought right up to date and cleaned up.
1996-10-30 00:12:40 +00:00
0bec347c79
Allocate a DMA channel number when setting up the podule descriptors.
...
The DMA channel is determined by the IOMD present in the machine and the
podule slot number.
1996-10-30 00:07:42 +00:00
2f8b021957
cosmetic...
1996-10-30 00:04:31 +00:00
c11a34daff
Added a dma_channel field to the podulebus structure so that the
...
podulebus driver can allocate the DMA channels for the podules located.
1996-10-30 00:01:05 +00:00
29465fe28a
Updated the acknowledgement comments.
1996-10-29 23:52:59 +00:00
f5a1f76622
Remove the bufferable bit from the pte for the DMA buffer.
1996-10-29 23:37:39 +00:00
68ecde0706
Added support for switch mouse reports between absolute and relative
...
positions.
1996-10-29 23:28:12 +00:00
8666e8f843
Treat MOUSEMODE_REL as an absolute value rather than as a bit flag.
...
Use sc_mode rather than mode.
1996-10-29 23:25:29 +00:00
8d9b74e953
Make sure that DMA channels 2 and 3 are setup as external for the podulebus
...
on RiscPC machines.
1996-10-29 23:22:57 +00:00
7824cc4e83
Added definitions of the IOMD DMA registers.
1996-10-29 23:14:34 +00:00
9785e7cd61
Added support for all variations of the msr instruction.
...
Added support the new instructions defined in the ARM V4 Architecture
Reference manual (long multiplies, half word load and stores,
half word/byte signed loads).
Added support for the ARM810 IMB architecture defined SWIs.
Fixed bug in calculating some immediate constants.
Added support for the wfs, rfs, wfc, rfc instructions
Added support for the floating point compare instructions
Added ldf, stf, ldc and stc instructions.
Fixed mis-disassembly of some msr/mrs instructions.
The ldm and stm instructions will modify the direction identifier to
use the stack variations if the base register is r13.
1996-10-29 23:12:26 +00:00
23439db6ba
The new cg4 driver does not use dev/bt_subr.c
1996-10-29 19:58:14 +00:00
d6dfd783d9
Checkpoint new version of this driver with support for the "Type A"
...
variant of the CG4 (the one with the AMD colormap DACs). This has
been tested only on the "Type B" H/W at this point (Brooktree DACs).
Thanks to Ezra Story and Scott Ellis for the "Type A" support.
1996-10-29 19:54:19 +00:00
cb78378201
Fix typo (fbattach => fb_attach)
1996-10-29 19:27:37 +00:00
a4d7da78e4
Add esp1 at obio?
1996-10-29 06:16:29 +00:00
50c2da8f27
Interrupt-driven, but slow, NCR 53c96 driver for the 040-based macs. Contains
...
some guesses for the machines that have two of these buggers (I don't have
such a machine). This driver is a copy of the sparc/alpha esp with a
minimum of changes--after we get it performing a bit more respectably,
we should see about re-normalizing the sources.
1996-10-29 06:08:58 +00:00
32e07b8b3a
Add prototype for mac68k_register_scsi_b_irq().
1996-10-29 05:42:16 +00:00
215afb273e
Flag Q900/950 as having a second scsi controller.
1996-10-29 05:36:15 +00:00
487a6bebfc
Add a function to install an interrupt handler for 2nd scsi bus (Q900/950).
...
Take a guess that it's at via2, bit 0 (where 5380 DRQ is).
1996-10-29 05:33:37 +00:00
35667ae56f
ncr96scsi -> esp for consistency with sparc and alpha.
1996-10-29 04:26:57 +00:00
3c34dac1d0
Obsolete.
1996-10-29 04:23:50 +00:00
d26717de0e
Workaround for building linux-emulation LKM.
1996-10-29 02:19:25 +00:00
531802b5dd
cpp -> ${CPP}
1996-10-29 00:11:27 +00:00
59b640b2fc
Call kvm_uncache() from dvma_malloc() where it belongs and make sure
...
it's called when SUN4M is nor defined.
Merge in changes from Jason to make dvma_mapin() work on (sun4c) machines
with a write-back cache.
1996-10-28 23:02:54 +00:00
0c32bba802
Make this compile with -Wcast-qual.
1996-10-28 08:46:35 +00:00
072b7020c4
* Fix a few wrong fallthroughs in switch cases:
...
- add a missing return; at the end of a case, leading to wrong disassembly
of the next few instructions after fmovem.
- while we're here, correct the same bug in PBcc.
XXX there are a few other dubious fallthroughs in this file (which are
not explicitly marked with /* FALLTHROUGH */), which I didn't yet analyze.
* Fix other FMOVEM interpretation bugs:
- correct printing of FP data register lists if all are used (only FP0
would be mentioned)
- correct printing of FP data register lists in the case the list is reversed
(would have printed nothing)
- correct mapping of fp0-fp7 to register list bits (was reversed)
- correct printing of FP control register lists (this list is never reversed)
- correct printing of FMOVEM with FP control registers (the data direction
was interpreted the wrong way)
* While we're here, enhance the comments in MOVC's list of cpu control
registers
1996-10-28 08:43:18 +00:00
d5f094e14f
Make this compile with -Wcast-qual
1996-10-28 08:42:13 +00:00
1e7948408e
Most 040 models have scsi regs at base + 0x10000, not base + 0xf000
...
like the Q700.
1996-10-28 03:54:08 +00:00
cafb62af25
Fix timer initialization so that we don't gain one extra microsecond per
...
second on Sun4m machines. Although this was in the noise of the unstable
Sun clock crystals before, the discrepancy amounted to about 100 ppm, and
thus made NTP perform poorly. NTP now works happily on my SS20...
1996-10-28 00:20:31 +00:00
f5927ca260
Minor nit in my change regarding const and non-ansi code...
1996-10-27 21:50:33 +00:00
2ada6af51b
Oops, part of that last commit was not meant to go in.
...
The definitions of va_alist, va_dcl belong elsewhere.
1996-10-27 20:50:00 +00:00
a0d9bd5bb2
The hack-ish tricks to make the ANSI-style va_start macro work in
...
non-ANSI mode were not quite complete. This makes non-ANSI work.
Perhaps it would be better to eliminate this hack altogether...
1996-10-27 20:30:52 +00:00
9b8d79eeed
Clarify the purpose of this file (user-level code only).
1996-10-27 19:27:54 +00:00
eb605060cc
Add options EXEC_SCRIPT and EXEC_AOUT.
1996-10-27 09:14:59 +00:00
2c83ce47ad
add options EXEC_SCRIPT and EXEC_AOUT
...
Sync with ALL, config again.
1996-10-27 09:07:50 +00:00
dd2ea83317
add EXEC_SCRIPT and EXEC_AOUT
1996-10-27 08:52:04 +00:00
e4d79db27e
enable bznsc driver
1996-10-26 17:42:07 +00:00
ca80cc0ce0
add -Wcast-qual
1996-10-25 23:47:01 +00:00
ce53653783
make the namei struct members ni_dirp and ni_next, and the componentname
...
struct member cn_nameptr 'const', since they should never be used to
modify the path name. (Only the pathname buffer, cn_pnbuf, should be
modified.) Propagate the const poisoning to code that uses the namei
and componentname structs.
1996-10-25 23:13:58 +00:00
8800178e5c
-Wcast-qual cleanups. Don't discard 'const' when casting.
1996-10-25 22:15:54 +00:00
9fa0b6391e
don't thow away char_type's 'const'ness via a cast when passing it to scanc().
...
(1) that causes -Wcast-qual to be unhappy, and (2) the cast is unnecessary!
1996-10-25 22:11:39 +00:00
ca829ca73c
don't assign non-const pointers from const pointers; make the appropriate
...
pointers 'const'. (-Wcast-qual)
1996-10-25 22:01:44 +00:00
a67c0b16b8
define path name string variables that we should not (and, thankfully, do
...
not) modify as 'const char *' rather 'char *'.
1996-10-25 21:57:58 +00:00
eaa37ec87a
remove bogus cast of second arg to bcmp(). (nm_name is a const char*,
...
and was being unnecessarily cast to 'char *'; -Wcast-qual.)
1996-10-25 21:52:02 +00:00
2ab4192195
update alpha_XXX_dmamap() invocations to match prototype.
1996-10-25 21:33:30 +00:00
614fa7e02e
make the first arg of b_to_q (the u_char * that points to data to be
...
stuffed into the queue) const, since it's not modified.
1996-10-25 21:22:10 +00:00
ef6504281a
remove duplicate prototypes from tty_subr.c (ndqb, putc, b_to_q), and
...
make the first arg of b_to_q (the u_char * that points to data to be
stuffed into the queue) const, since it's not modified.
1996-10-25 21:20:29 +00:00
a5649f782f
first arg to alpha_XXX_dmamap is now a vm_offset_t
1996-10-25 20:58:11 +00:00
22b29b5058
prototype alpha_XXX_dmamap(), the alpha DMA mapping hack.
1996-10-25 20:48:59 +00:00
e50a1d048c
Bump NetBSD version to 1.2B (kernel interface changed)
1996-10-25 20:13:16 +00:00
0cda663b65
Make installboot work for 1.2 & 1.2A (should be part of 1.2 patches).
1996-10-25 20:05:04 +00:00
599db9a26c
Nuke declaration of susword(). It's declared in systm.h now.
1996-10-25 20:02:34 +00:00
819ba49d29
Nuke 2 useless instructions that only cause _doboot to panic now that
...
page zero is *properly* protected.
1996-10-25 20:00:39 +00:00
a93d33fb93
db_memrw.c:
...
- Sync with hp300 version.
Machdep.c:
- Notify the vm-system that kernel-text is read/execute
- Notify the vm-system that page zero isn't mapped
[ Grrr.. How do you cancel a check-in when you find out too late they
should have different comments ]
1996-10-25 19:58:42 +00:00
f577ebda70
Move 'not finished' printf within AUDIO_DEBUG ifdefs, it should normally
...
be silent about this and caused confusion with stray interrupts.
1996-10-25 07:25:48 +00:00
096b0d6c6e
In udp_output(), sanity check the length of the packet to be transmitted.
...
If it's larger than IP_MAXPACKET, return an error condition.
Based on a patch from Bill Fenner <fenner@parc.xerox.com>
1996-10-25 06:35:16 +00:00
59bbc2199e
In rip_output(), sanity check the length of the packet to be transmitted.
...
If it's larger than IP_MAXPACKET, return an error condition.
Based on a patch from Bill Fenner <fenner@parc.xerox.com>
1996-10-25 06:33:36 +00:00
e55c8a9c7e
Before concatenating frags, sanity check the length of the packet. If it's
...
larger than IP_MAXPACKET, discard it.
Based on a patch from Bill Fenner <fenner@parc.xerox.com>
1996-10-25 06:30:32 +00:00
65c188b3c7
Make length and offset fields unsigned. From Kevin M. Lahey <kml@nas.nasa.gov>
...
Add a counter to IP stats, to count packets which are discarded on the
grounds that they are too large.
1996-10-25 06:24:16 +00:00
ee34a9ab6d
Make length and offset fields unsigned. From Kevin M. Lahey <kml@nas.nasa.gov>
1996-10-25 06:22:24 +00:00
702e7ec138
make script_kvars an array of unsigned longs, and cast when assigning the
...
elements, to avoid warnings (with -Wcast-qual) about 'volatile'
qualifiers being discarded.
1996-10-25 00:33:00 +00:00
bba547e063
second and third args to scanc() (string and table) are not and should not
...
be modified. Make them 'const'.
1996-10-24 23:50:31 +00:00
311fcee75f
when casting const pointers, preserve const qualifiers. (-Wcast-qual)
1996-10-24 23:45:32 +00:00
6e74f35ac9
First small hack at 68060 support: processor configuration register.
...
(We don't use the new instructions lpstop and plpa in our kernel, so no hurry.)
1996-10-24 18:30:17 +00:00
b88543e379
Remove addressing bug in hand-optimized assembly code.
1996-10-24 15:52:08 +00:00
753949629e
Make this compile again if PCI_CONF_MODE is defined (unused label).
1996-10-24 12:32:29 +00:00
016d7b35dc
Make this compile without COMPAT_10 (unused variable).
1996-10-24 12:22:43 +00:00
574f71ab26
replace a construction in sys_setitimer() that was too tricky for its
...
(and my!) own good with a more straightforward one that is equally (and
more apparently) correct.
1996-10-24 04:35:33 +00:00
8595fc3073
make coredump() use more sensible error returns (even though they're
...
not used by anything, for now), and implement MNT_NOCOREDUMP by checking
whether or not MNT_NOCOREDUMP is set on the file system where the dump
would land (i.e. the file system of the process's current working
directory), and disallowing the core dump if it's set.
1996-10-23 23:13:19 +00:00
6d3337bdf6
permit MNT_NOCOREDUMP as a generic mount flag.
1996-10-23 23:07:08 +00:00
92f76697f5
add the MNT_NOCOREDUMP file system flag, which prevents the system
...
from writing core dumps on file systems for which it is set. Also, add
a comment noting that the mount flags aren't in numerical order.
1996-10-23 22:53:09 +00:00
dd4aa9cef1
Fix typo: #endeif
1996-10-23 20:04:40 +00:00
601935b8ae
Use struct trapframe instead of struct frame, and include a
...
slight hack to make this cross-build correctly on a SPARC.
1996-10-23 16:39:27 +00:00
4e462c2f6e
Dont bother grouping labels in computeSignal().
...
This form is easier to compare with trap.h
1996-10-23 16:30:48 +00:00
6fa72d79b5
Add options EXEC_AOUT and EXEC_SCRIPT
1996-10-23 16:14:23 +00:00
4675aac3cf
Set SCSIBase properly on Quadras. Separate out CLASSAV. From Dave Huang
...
<khym@bga.com>.
Also fix COMPAT_NOMID to compile again.
1996-10-23 14:12:37 +00:00
0363bd9a12
Include ether.h since we're now using NETHER, also use NETHER > 0 not NETHER.
1996-10-23 13:35:41 +00:00
8738c57e61
* Phil Budne's is now integrated.
...
* Remote kerneldebugging with gdb works too.
1996-10-23 07:55:10 +00:00
2336fbd2c6
* Phil Budne's much improved scn driver.
1996-10-23 07:52:35 +00:00
e7e91939da
* Remove references to deleted files (oldncr.c, dp.c).
1996-10-23 07:50:03 +00:00
54eec4c697
* Add EXEC_SCRIPT and EXEC_AOUT.
1996-10-23 07:49:58 +00:00
0cdf2807ab
* KLONDIKE has only four serial lines.
...
* KLONDIKE has a ns381 installed.
* Add EXEC_SCRIPT and EXEC_AOUT.
* Enable ddb.
* Enable FDESC.
* Monitor speed is 9600 baud.
* Monitor speaks 8N1.
* Pin down devices on the SCSI-Bus.
* Configure vnd, bpfilter, ppp and tun.
1996-10-23 07:49:55 +00:00
45fe815542
* Add EXEC_SCRIPT and EXEC_AOUT.
...
* Remove lines commented out.
* scsibus0 is attached to ncr0.
1996-10-23 07:49:54 +00:00
225801ae14
* New file; configuration for my second pc532.
1996-10-23 07:49:52 +00:00
414cbce393
* Add EXEC_SCRIPT and EXEC_AOUT.
...
* Use new options for to set the console baudrate and the default
tty mode.
* Include PPP_BSDCOMP and PPP_DEFLATE.
* scsibus0 is attached to ncr0.
1996-10-23 07:49:49 +00:00
63d15a966d
* Sync with i386 version.
...
* Scratch ram for debugger stacks ends at VM_MIN_KERNEL_ADDRESS + 0x1000
and not at VM_MIN_KERNEL_ADDRESS + 0x2000.
1996-10-23 07:46:08 +00:00
e9a160096b
* Sync with i386 version.
1996-10-23 07:46:07 +00:00
4b2a039488
* configure() has to be declared void.
1996-10-23 07:46:04 +00:00
865930408c
* Do not include limits.h, use machine/limits.h.
1996-10-23 07:43:44 +00:00
897acfdcbb
* Do not include stddef.h.
...
* Add definition of offsetof.
1996-10-23 07:43:42 +00:00
1a81564477
* Declare reserve_dumppages and pmap_activate.
1996-10-23 07:30:57 +00:00
1731660b98
* Declare kvtop.
1996-10-23 07:30:54 +00:00
c53ad1988a
* At least the Teac FC-1 Shugart-SCSI bridgeboard does motor on/off
...
management by itself. But when it gets a start unit request, it keeps
the floppy motor running all the time. This adds code for dealing with
yet another quirk (SDEV_NOSTARTUNIT) that prevents sd.c from sending
start unit requests. A entry for the Teac FC-1 is added to the quirk
table.
1996-10-23 07:25:39 +00:00
3ff0c0553e
* The kernel-stack no longer needs to be wired-down on the pc532.
1996-10-23 07:20:09 +00:00
a587cc60a0
* In dosetrlimit ensure that rlim_cur and rlim_max are >0. Otherwise
...
the kernel might crash due to invalid values passed to setrlimit.
1996-10-23 07:19:38 +00:00
2e7c250f84
update drivers to use the new NetBSD/alpha DMA mapping hack, since
...
the old one is not workable with the new bus.h.
1996-10-23 04:37:31 +00:00
1b03f1bca7
update for new bus.h macros. bus_io_* and bus_mem_* integrated into
...
single bus_space_* framework. Unfortunately, bus_space_{read,write}_*
operations still imply barriers. That will change soon.
1996-10-23 04:12:13 +00:00
0023076caa
Need to initialize fi_glasstty before using it.
1996-10-23 02:34:23 +00:00
e1467b90b1
Add prototypes, and a few more fields now used in z8530tty.c
1996-10-23 00:38:05 +00:00
a329be829e
Add masks for some combinations of bits that are set as a group.
1996-10-23 00:32:31 +00:00
chuck