efde490942
foosize()'s return value is in DEV_BSIZE units; adjust the size obtained
...
from the disklabel accordingly.
1997-06-24 00:20:44 +00:00
d152627095
Make this work again; the code to avoid attaching a 3c509 in P&P mode
...
didn't map in the port properly, and it was only luck that it worked
on anything at all.
1997-06-23 05:25:40 +00:00
5d4e140e53
Remove spurious line left over in previous commit.
1997-06-18 22:17:14 +00:00
f5bf0d3701
wdsize(): only call wdopen()/wdclose() if not already open, per the
...
current `openmask'.
1997-06-18 20:39:55 +00:00
09cad93ce8
Implement a better backpressure mechanism so that data is collected
...
in the driver's buffer if the tty buffer is full. If the driver's buffer
becomes full, turn off receive interrupts until it drains a bit.
1997-06-15 11:18:59 +00:00
47fab5e3ae
Make this compile again in light of recent changes to cdio.h
1997-06-14 08:55:14 +00:00
86ad297c12
Fix a braino in record source selection and a pasto in detecting
...
16 bit mode recording.
1997-06-13 19:21:59 +00:00
11e78a6b0d
Pull thorpej-bus-dma branch into mainline.
1997-06-06 23:43:45 +00:00
9d52c4bb31
4th arg to bus_space_{read,write}_multi_2() is a u_int16_t *, and should be
...
cast if it isn't. (These casts aren't necessarily safe, because of
alignment issues, but they allow the code to compile with prototyped versions
of bus_space_{read,write}_multi_2().)
1997-06-04 20:42:56 +00:00
5759a768d7
add software emulation stub for ulinear_be
1997-05-31 15:30:22 +00:00
9a7f1bfa84
Use single mode, not demand mode, for auto-initialize transfers.
1997-05-29 21:46:07 +00:00
8551fb607a
fix popping noises on 16-bit ulinear output.
...
add big-endian support
XXX ULINEAR_BE still needs ad1848 emulation on gusmax
1997-05-29 05:33:15 +00:00
1b429137ae
make Jazz16 16-bit output work properly again. Still hangs somewhere
...
(not yet diagnosed) on occasion in high-speed mode, but a ^C will exit
immediately--no 30-second drainage timeout.
1997-05-29 04:57:02 +00:00
e9028468cd
Don't use the TC bit to check for wraparound in isa_dmacount(); remember the
...
transfer length and use that.
1997-05-28 20:02:39 +00:00
1bd32f9cad
Add Alaw encoding emulation.
1997-05-28 00:07:46 +00:00
1616170859
A cosmetic name change.
1997-05-27 23:37:53 +00:00
6756ff7858
Minor corrections to previous. Notably, make recording work on SBPro again.
1997-05-26 16:13:59 +00:00
6bfd7b7d45
Remove unneeded call to comstop() in commsrint(). This fixes a problem
...
where the driver would sometimes retransmit bytes.
1997-05-26 14:54:46 +00:00
97c6a307e3
Where _is_ that brick when you need it?!
1997-05-24 03:45:40 +00:00
72b5ba3901
Redo the way selecting the mode for SB cards is done completely.
...
It is now table driven since there are so many different variations
of SB cards out there.
Also fix a bug that stopped SB2 and SBPro from working.
1997-05-23 21:19:59 +00:00
c612a6fca7
Check that setting IRQ and DRQ on SB16 actually succeeds.
1997-05-23 09:45:40 +00:00
1fd29f4172
Make the audio default parameters into a globally accessible constant.
1997-05-20 12:51:43 +00:00
0db08d11e6
Redo the SB mixer code. The driver can now distinguish between the
...
four different mixer options: none, CT1335, CT1345, and CT1745.
It should now be possible to access most of the SB16 functionality.
1997-05-19 23:14:29 +00:00
50a39a3334
Add NetBSD RCS IDs.
1997-05-18 06:08:02 +00:00
8d6f509439
Mask the level registers as the documentation suggests.
1997-05-18 00:36:03 +00:00
d7a82223f4
Change lowater calculation a little.
...
Fix mixer setting bug and add some missing splaudio().
Set SB drq16 to 5 and don't pretend to be SB v1.0.
1997-05-17 23:26:33 +00:00
d3844873e8
Mods for ESP406/FAS408 ISA SCSI driver (from Eric S. Hvozda; PR#3581)
1997-05-17 20:58:47 +00:00
7f4962f3f3
An ESP406/FAS408 ISA SCSI adapter driver (from Eric S. Hvozda; PR#3581)
1997-05-17 20:58:12 +00:00
abdd4ddbea
Back to pretending to be a SB v1.0 again, the mixer code for higher
...
versions is buggy.
1997-05-16 07:07:22 +00:00
37be371415
Clean up emulation code, SB, and GUS drivers and add some more encoding
...
emulation to SB.
1997-05-13 19:02:11 +00:00
877dcf7fc9
restore accidentally-lost set of nchannels in driver layer
1997-05-12 04:11:43 +00:00
9734adc67f
use normal linear names/values for 8-bit encodings
...
mark mulaw as emulated (it's done via a mapping table)
use GUS query encoding routine, even on GUS max, since the encoding
stuff is handled by the GF1.
XXX might not be right for recording, but it's correct for playback.
1997-05-10 18:58:33 +00:00
e63a553175
Change the interface between high and lowlevel audio drivers again:
...
Set the encoding parameters slightly differently.
Remove the SW encoding/decodinf functions from this interface
and move them to the audio_parameter struct; this is both more efficient
and flexible.
1997-05-09 22:16:27 +00:00
c4a52794f1
Convert to new orthogonal audio encoding scheme and implement
...
some of the new encodings. The change to ioctl AUDIO_GETENC is
NOT backwards compatible.
1997-05-07 18:51:31 +00:00
383d8e6f79
update sb_printsc() to match current reality.
1997-05-07 04:36:00 +00:00
8f6ec1a681
wds_find has the sense of its return value backwards (0 vs 1). This
...
caused the probe to succeed when there was no device present.
1997-05-01 20:10:57 +00:00
2fb1d088c5
XXX Pretend that all SB cards are of model 1.
...
XXX This way you can at least use SB cards until the real fixes go in.
1997-04-30 02:08:12 +00:00
526ef2f618
Change the interface between the high and low level audio drivers
...
so that all audio encoding parameters are set at once. This simplifies
the interface and make error checking easier.
1997-04-29 21:01:33 +00:00
bc66bb3e6e
Oops; forgot to GC the last mbuf allocated when out of clusters.
...
Also, remove the internal mbuf queue, which is not needed by this driver.
1997-04-28 18:30:20 +00:00
103c7d360d
Oops; forgot to GC the last mbuf allocated when out of clusters.
1997-04-28 17:03:58 +00:00
b3192632db
On alpha, sizeof (long) != sizeof (int) and sizeof (int) != sizeof (ptr_t)
1997-04-28 15:52:44 +00:00
f05fad5ad9
- Add a new variable to epaddcard to call epconfig with the right chipset.
...
- Don't attach a 3c509 in PnP mode.
1997-04-27 09:44:45 +00:00
91a808523c
Fix typo in previous.
1997-04-24 08:05:13 +00:00
030c7010ee
If we fail to allocate a cluster to hold a large packet, simply
...
drop it rather than using a chain of tiny mbufs.
1997-04-24 02:04:33 +00:00
5cfcabc2fe
compile when __BROKEN_INDIRECT_CONFIG isn't defined.
1997-04-18 00:50:33 +00:00
f2746e9620
Update for new com driver.
1997-04-09 16:44:21 +00:00
73cfcd9f66
fix compile error if AUDIO_DEBUG
1997-04-06 17:21:45 +00:00
7dcb9bed4c
Make sure the bus tag is set where we need it.
1997-04-06 00:54:22 +00:00
29e9c34ad3
Add RCS id.
1997-04-06 00:35:19 +00:00
0a999294f5
Add support for MAD16 based audio cards.
...
XXX Change the way we determine to probe for it when
multiple I/O ranges are available.
1997-04-06 00:33:07 +00:00
7dedd37033
Busify the WSS driver.
1997-04-05 23:50:23 +00:00
9448a01404
New version of com driver. Uses a different queueing mechanism and a split
...
hardware/software interrupt mechanism for improved performance. Many odd
protocols bugs also fixed.
1997-04-04 20:56:34 +00:00
232ade1b2b
comdefaultrate -> comconsrate
...
comconsbah -> comconsioh
Only use comconsrate on the console.
1997-04-04 20:49:49 +00:00
ef8d40a999
Busify the driver (from perry).
1997-04-04 18:59:35 +00:00
4df7e1dac7
Remove superfluous probe message.
1997-04-02 03:58:25 +00:00
c1f72bba37
Add ifmedia hooks: include <ifmedia.h> and add sc_media to softc.
1997-03-30 22:47:05 +00:00
dd46e6280e
partial fix for PR 3385: correctly identify JAZZ-16 when AUDIO_DEBUG is
...
enabled
1997-03-29 05:41:28 +00:00
11117540d2
Use a temporary data structure for holding probe information, rather than a
...
full softc.
1997-03-29 02:32:30 +00:00
056fd71e85
General cleanup: bus.h, etc.
1997-03-29 02:11:09 +00:00
080350dc0d
Use a temporary data structure for holding probe information, rather than a
...
full softc.
1997-03-28 23:47:08 +00:00
eba3c11c27
some cleanup; still needs a *lot* of work
1997-03-25 07:57:14 +00:00
983d7a8c15
use new name sc_drq8 and initialize sc_drq16 (reflect changes to SB driver)
1997-03-24 05:30:28 +00:00
188dec4d19
Clean up a bit, and export isa_dmamask() and isa_dmaunmask() interfaces.
1997-03-21 02:17:11 +00:00
3523bc35d5
Add an isa_dmacount() function, to get the current residual count on a channel.
1997-03-21 00:00:21 +00:00
6f51eb5c3d
Use autoinitialize DMA mode on the SB2 and later. Partly from Torsten Duwe.
1997-03-20 21:42:11 +00:00
b89990fba6
Oops; fix pasto.
1997-03-20 20:18:40 +00:00
4f9648674a
Make sure we round the block size to a multiple of the sample size.
1997-03-20 20:15:24 +00:00
e0b3534b6c
Remove bogus block rounding code. If the application sets a
...
block size explicitly, it had better know what it's doing. From
PR 2587, by Robert Baron.
1997-03-20 16:04:22 +00:00
a2f33a43c2
Turn off a debugging printf().
1997-03-20 11:04:51 +00:00
95abb133dc
Add 16-bit DRQ support on PnP, and enable 16-bit output.
1997-03-20 11:03:10 +00:00
c1cc14fa25
Combine set_encoding and set_precision into a single set_format interface.
1997-03-20 06:48:48 +00:00
de69173e77
Fix oversights in previous.
1997-03-20 03:56:11 +00:00
a283cb636c
Check for errors returned by AD1848 routines.
1997-03-19 19:54:44 +00:00
2b72395bfc
ad1848_commit_settings(): Don't set the speed/format register if the
...
parameters haven't changed. From PR 3360, by Jason Baker.
Also, clean up several overly-complex interfaces.
1997-03-19 19:31:15 +00:00
eb7e30aa3d
normalize off-by-four ad1848 register offsets.
...
also silence probe unless debugging is enabled.
1997-03-19 06:47:37 +00:00
80a8a81608
normalize off-by-four ad1848 register offsets.
1997-03-19 06:45:21 +00:00
1d987a161b
#include <net/if_media.h>
1997-03-17 03:17:34 +00:00
07b064e02e
New ARP system, supports IPv4 over any hardware link.
...
Some of the stuff (e.g., rarpd, bootpd, dhcpd etc., libsa) still will
only support Ethernet. Tcpdump itself should be ok, but libpcap needs
lot of work.
For the detailed change history, look at the commit log entries for
the is-newarp branch.
1997-03-15 18:09:08 +00:00
8147d1718f
fix various AD1848/PSS misfeatures; from Jason Baker in PR kern/2045.
...
also did some misc cleanup of my own.
1997-03-13 08:34:49 +00:00
ac3b8b13b7
Don't share the silence block between devices. Make silence filling work for
...
more encodings, and make it device-independent. From Lennart Augustsson, in
PR kern/3305.
1997-03-13 02:19:32 +00:00
d9b86972c1
SB minor version number is always two digits
1997-03-12 07:06:19 +00:00
1186720517
eliminate leftover header from bt -> bha conversion; noted by Enami
...
Tsusgutomo in PR kern/3310.
1997-03-11 04:24:03 +00:00
700cbbae46
Fix bug introduced in the conversion to bus_*(). Don't always say that
...
we are a JASS16. From enami tsugutomo.
1997-03-03 21:40:01 +00:00
c7cec27edf
Move if_ep media-sense code from front ends to inside back end,
...
to prepare for if_media, and to support EISA 3c59x cards:
* change epconfig() to take a short that encodes the chipset
type (3c509, or Demon/Vortex/Boomerang).
* add distinct 3c509 and Demon/Vortex/Boomerang media-sense
functions to back end.
* Add EISA match/attach support for the 3c592 and 3c597
(Demon) cards as well as the 3c509-comatibl EISA 3c509/3c579.
* Assume that ISA and ISA PnP cards are 3c509-style, until
proof to the contrary (e.g. large packet support).
Tested on 3c595, 3c590, and 3c509b. Not tested on 3c515 or Demon.
1997-02-18 10:51:06 +00:00
2953a0ce90
Pass the i/o handle, not bus PA, to bus_space_unmap().
...
From Matthias Drochner <drochner@zelz28.zel.kfa-juelich.de>,
in PR #3216 .
1997-02-12 23:37:38 +00:00
dfa1224fab
Oops, pass the memory handle, not bus PA, to bus_space_unmap().
...
From Matthias Drochner <drochner@zelz28.zel.kfa-juelich.de>, in
PR #3216 .
1997-02-12 23:36:04 +00:00
1dd1504980
Move the aha ISA probe functions into a separate file.
1997-02-07 17:37:27 +00:00
f89ffa1fe4
don't clobber IER in cominit(). (suggested by mycroft.)
1997-01-30 19:42:33 +00:00
3573080902
split isasearch (!__BROKEN_INDIRECT_CONFIG) completely off of
...
isascan (__BROKEN_INDIRECT_CONFIG), and attempt multiple match/attach
of cloning devices in isasearch(). (If a match/attach succeeds for
a cloning device, try it again.)
1997-01-26 03:49:28 +00:00
8852c180ef
Fixes to wd driver from cgd -- corrects several nasty bugs typically
...
associated with coming out of suspends/sleeps on laptops.
Approved by fvdl.
1997-01-17 20:45:29 +00:00
e6717c0bc9
- convert to bus_space_*
...
- split attachment code to sb_isa.c
1997-01-16 21:03:30 +00:00
fe9f1f4e3e
add missing copyright and RCS ID; ok'd by mycroft
1997-01-15 07:06:42 +00:00
be33336052
If attaching the console, reinitialize it immediately.
1996-12-14 10:46:38 +00:00
58e4442168
Turn off the baud rate changing optimization.
1996-12-14 08:56:23 +00:00
d502e68402
Fill in sc_link.max_target
1996-12-10 21:27:16 +00:00
74187419b6
The last change fixed a last-minute goof in the __BROKEN_INDIRECT_CONFIG
...
case, but added a typo (extra parenthesis) in the !__BROKEN_INDIRECT_CONFIG
case. fix it.
1996-12-08 00:14:03 +00:00
243ef518d2
fix a (fatal) bug in the __BROKEN_INDIRECT_CONFIG changes checked
...
in yesterday. (got a little bit careless with #ifdef'd variables.)
1996-12-05 22:16:04 +00:00
179a058e17
fix AUTO_CAL_ENABLE bug, & misc. cleanup.
1996-12-05 07:01:30 +00:00
94909aee07
return proper output port. Fixes PR kern/2014.
1996-12-05 06:48:47 +00:00
3ec2c5af68
Duh, make sure i/o tags and handles are initialized before actually
...
probing for the LANCE chip.
1996-12-05 02:39:37 +00:00
197d80c63a
update these so they compile whether or not __BROKEN_INDIRECT_CONFIG
...
is defined.
1996-12-05 01:25:23 +00:00
c164cadf68
Convert to use <machine/bus.h>
1996-12-02 05:44:17 +00:00
3b4e2a1ac9
In wdattach(), when printing out info about the drive, make the output
...
look a little more like a SCSI disk's. This has the pleasant side-effect
of preventing the output from annoyingly extending past 80 columns.
1996-11-27 10:50:39 +00:00
d7c58f547e
Drop LPT_NPORTS to 4 from 8. Some lpt units require only 4 I/O ports
...
(e.g. from 0x3bc to 0x3bf, for example). Others may require more,
but until there's some special handling for them, 4 should be returned
so that on systems with I/O port accounting, the unit at 0x3bf can be
properly mapped, etc. (OK'd by mycroft.)
1996-11-23 23:22:50 +00:00
452ba6e098
restrict the FSTATE_STAR prohibition (and panic) to the i386 only. Cloning
...
devices actually do make sense on indirect-config busses, because you
might be able to have more than one of the busses! In addition, they're
useful because they don't require unit numbers to be wired down, so you
could e.g. have vga* at indirect? and vga* at direct?, and have the first
one found be unit number zero. Finally, devices which can divine their
own ports numbers, etc., actually should be cloning, even if you know you'll
only have one bus that they can live on.
1996-11-23 21:36:44 +00:00
bcc644fd7e
Add missing arguments to NIC_GET in debug code. Fixes kern/2875.
1996-11-17 04:11:18 +00:00
40bd2b1104
Fix front-ends of split uha driver to compile when DDB is not configured:
...
Propagate Debugger() macro from uha.c to uha_{eisa,isa}.c.
update file names accordingly.
1996-11-15 22:53:36 +00:00
b005a8ee10
move cominit() prototype to comvar.h, so that ports which use 'com'
...
for serial console, but don't use the (i386-specific)
comcninit()/comcnprobe() functions, can do the right thing.
1996-11-13 19:41:35 +00:00
457c188626
Use device struct from sbdsp_softc, eliminate redundant softc members.
...
Fixes PR kern/2237.
1996-11-12 07:39:56 +00:00
af29f79ed4
Fix WDDEBUG code; PR kern/1480.
1996-11-07 05:23:07 +00:00
53945ccb19
Eliminate unsolicited spewage; PR #2108 .
1996-11-05 07:20:32 +00:00
697941357c
Eliminate unsolicited spewage; PR #2108 .
1996-11-05 07:17:23 +00:00
24620e1cd0
Rearrange wds_attach() to initialize DMA channel before setting to cascade
...
mode.
Fix silly error in -ASC case, pointed out by Niklas Hallqvist.
1996-11-03 16:20:31 +00:00
f577ebda70
Move 'not finished' printf within AUDIO_DEBUG ifdefs, it should normally
...
be silent about this and caused confusion with stray interrupts.
1996-10-25 07:25:48 +00:00
233251d896
add missing argument to bus_space_map in ESP code
1996-10-22 00:45:25 +00:00
769a499800
New bus.h implementation/interface:
...
- No more distinction between i/o-mapped and memory-mapped
devices. It's all "bus space" now, and space tags
differentiate the space with finer grain than the
bus chipset tag.
- Add memory barrier methods.
- Implement space alloc/free methods.
- Implement region read/write methods (like memcpy to/from
bus space).
This interface provides a better abstraction for dealing with
machine-independent chipset drivers.
1996-10-21 22:34:38 +00:00
0211a3232d
Appease the compiler: get rid of some unused variables, add some
...
prototypes, and suppress a bogus "might be used uninitialized" warning.
It's clear from reading the logic of the function that produces the
warning that the variable will not be used uninitialized, but the
compiler just isn't smart enough, I guess. Marked XXX for future reference.
1996-10-17 04:34:08 +00:00
35b8c6aa4c
Add some prototypes, clean up some unused variables, and misc. other
...
compiler warning cleanup.
1996-10-17 04:21:55 +00:00
bfe653fbd7
fix PR 2851: make it compile under -Wformat
1996-10-16 11:32:45 +00:00
aa8449a9ef
fix compile errors & warnings
1996-10-16 01:12:18 +00:00
86373f8cf9
backout kprintf changes
1996-10-13 01:37:04 +00:00
58953408cb
printf -> kprintf, sprintf -> ksprintf
1996-10-10 22:04:48 +00:00
e51a0f737a
- printf -> kprintf, sprintf -> ksprintf
...
- fix unused variable warning
- include <systm.h>
1996-10-10 21:27:25 +00:00
ce31bd3eb6
- printf -> kprintf, sprintf -> ksprintf
...
- Remove unused variable
- include <systm.h>
1996-10-10 21:26:04 +00:00
18f1d603f0
- printf to kprintf, sprintf -> ksprintf
1996-10-10 21:25:07 +00:00
764db9b35b
- printf -> kprintf, sprintf -> ksprintf
...
- provide a default case to handle an unknown model number.
- include <systm.h>
- remove unused variable.
1996-10-10 21:23:28 +00:00
245e10b406
- printf -> kprintf, sprintf -> ksprintf
...
- ifdef an unused variable.
1996-10-10 21:21:52 +00:00
ee2c8600ee
- printf -> kprintf, sprintf -> ksprintf
...
- remove kvtop declaration.
1996-10-10 20:04:03 +00:00
b10785c0e4
fix "control reaches end of non-void function" in check_eh() for -Werror.
1996-10-06 21:24:36 +00:00
767522373b
If we get a RXRDY interrupt, but RXRDY is not set in the LSR, briefly set IER
...
to 0. This fixes a condition where some UARTs send an infinite stream of
RXRDY interrupts.
1996-10-06 01:52:26 +00:00
d1f08e3e87
Serial console changes:
...
* Enable FIFO with trigger level 1.
* Set DTR and RTS so terminals are happy.
1996-10-06 01:46:04 +00:00
870052156e
Better error message when the card is found but shared memory isn't enabled
1996-10-04 01:28:54 +00:00
e1b380e139
Fix a bus mem space leak; always unmap the card, regardless of the success
...
of cy_find().
1996-09-26 19:24:04 +00:00
63b18ee2f2
This file is now obsolete.
1996-09-25 20:44:09 +00:00
5d34f1a62b
New cyclades driver from Timo Rossi
1996-09-24 17:45:14 +00:00
67417a473a
Use bus.h.
1996-09-07 12:12:18 +00:00
94bfaac456
Wrap the definitions of CONADDR and CONUNIT in #ifndef.
1996-09-06 05:06:01 +00:00
82f0b829e8
compoll() -> comsoft()
1996-09-05 16:42:32 +00:00
8427290044
wtpoll() -> wtsoft()
1996-09-05 15:37:18 +00:00
110ee78a6f
Remove cyselect().
1996-09-05 15:35:09 +00:00
b3eac79b64
tty stop functions really should return void, not int, and certainly not both.
1996-09-02 06:43:16 +00:00
70944d2e2c
Minor changes.
1996-09-01 00:20:20 +00:00
e8b5bd5b35
Update.
1996-09-01 00:10:55 +00:00
44bb2d98e1
Split the UltraStor driver apart.
1996-08-31 20:26:48 +00:00
06fdef11fd
Split the BusLogic driver apart, and rename it to `bha (like BSDi).
1996-08-31 20:18:24 +00:00
164af20154
Add a missing "int" in a function declaration.
1996-08-30 01:40:35 +00:00
71ad30d0e9
(1) set scsi_link channel to either the appropriate channel (if a
...
multi-channel driver), or to SCSI_CHANNEL_ONLY_ONE if a
single-channel driver.
(2) use scsiprint() rather than a locally-defined autoconfig print
function, and kill any locally-defined print function.
1996-08-28 18:59:15 +00:00
2a73ef60b7
change cfprint_t type definition to take a const char *, rather than
...
a char *, because that's what was really intended, and because
if the print function modifies the string, various things could become
unhappy (so the string should _not_ be modified).
1996-08-27 21:53:46 +00:00
eea135a8b9
Two changes:
...
- Convert to use <machine/bus.h>.
- Also read station address in egattach(). The softc is no
longer required in the probe function.
1996-08-03 19:33:19 +00:00
a47a8c3f8c
Oops, missed a couple of inb()s..
1996-08-03 02:23:57 +00:00
c937985d60
Convert to use <machine/bus.h>, plus 2 bug fixes:
...
- In egstart(), if the Send Packet command fails, m_freem()
the mbuf chain before dequeueing another one (memory leak).
- In egintr(), return 1 if a known interrupt was processed.
Would manifest itself as spurious interrupts.
1996-08-03 02:12:46 +00:00
003947b965
Changed the driver to use bus_xxx().
1996-07-25 18:59:12 +00:00
bc2f07f331
move DDB-only label inside an #ifdef, so that -Wall works
1996-07-10 18:14:04 +00:00
794614df64
In the 3c503 probe, map the correct number of ports. (Unmap already
...
unmapped the correct number of ports, thus causing the ISA io port
extent map to get corrupted.)
1996-06-25 20:47:02 +00:00
a8e5b5ba47
Remove some unneeded FIFO flushes and reorder some register changes per the
...
6360 manual. Turn off synchronous negotiation.
1996-06-18 16:13:05 +00:00
202bd8b9ae
Turn off *DIAG by default.
1996-06-18 12:55:00 +00:00
08d585e924
add tty_attach() where appropriate.
1996-05-30 18:24:09 +00:00
4e8dbf468a
Added flags to the iy driver to override the media autodetect mechanism, if
...
necessary. Added a manpage to document the flags.
1996-05-22 15:39:43 +00:00
19b0b9502f
New version, with changes from Justin Gibbs and Noriyuki Soda.
1996-05-16 03:44:13 +00:00
52e2ab70b0
#include <machine/intr.h> to get IST_* definitions.
1996-05-14 00:31:04 +00:00
cec36bf8d5
Use intr.h.
1996-05-12 23:51:23 +00:00
f004654691
Update Herb's e-mail address; beer.org feels a lot more friendly.
1996-05-10 05:27:53 +00:00
e32158478e
Correct a couple of comments ... port 0x84 produces a 1.25us delay when
...
read, not 2.5us. (I must have been confused; thanks Charles, for
correcting me.)
1996-05-08 23:32:31 +00:00
1040e97175
If accessing shared memory on a 16-bit card, be careful not to do any
...
8-bit memory access; some cards, notably some WD/SMC cards, can't handle
8-bit access if 16-bit access has been enabled.
1996-05-08 22:09:18 +00:00
817e0b8d97
Fix a typo.
1996-05-08 17:29:40 +00:00
15354e899c
Changed struct ifnet to have a pointer to the softc of the underlying
...
device and a printable "external name" (name + unit number), thus eliminating
if_name and if_unit. Updated interface to (*if_watchdog)() and (*if_reset)()
to take a struct ifnet *, rather than a unit number.
1996-05-07 01:55:13 +00:00
7b3f25271d
Make the MI LANCE driver standalone, and use cfattach to resolve
...
naming conflicts between bus attachments on ports that can have
multiple instances of the LANCE.
Break up ISA LANCE driver into ISA and PCI front-ends.
Changed struct ifnet to have a pointer to the softc of the underlying
device and a printable "external name" (name + unit number), thus eliminating
if_name and if_unit. Updated interface to (*if_watchdog)() and (*if_start)()
to take a struct ifnet *, rather than a unit number.
1996-05-07 01:50:04 +00:00
95f41d24cc
Add "iy" driver for Ethernet ISA boards using the Intel i82595 chip, e.g.
...
(and only tested on) Intel Etherexpress PRO. Should work on any i82595 ISA
board which uses an EEPROM for config information; NETBLKID not yet supported.
TODO: change to BUS interface, add multicast support.
1996-05-06 21:36:51 +00:00
d53d6cd545
Move comintr() prototype to comvar.h; needed by the multi-port cards.
1996-05-05 19:50:44 +00:00
d21e608c6b
Make those compile again; they were missing a declaration for bc.
...
Also fix prototypes.
1996-05-05 19:49:51 +00:00
0bc154b367
Fix a bug I introduced when converting the driver to <machine/bus.h>.
...
Use the i/o handle for the `delay port' exported from the parent
ISA bus, rather than the totally bogus combination of [ioh, 0x84].
Also, fix a bug apparently introduced when the -Wall changes were checked
in which, under most circumstances, would cause a 16-bit WD8013EP to
be mis-identified as an 8-bit WD8003EP.
1996-05-05 01:28:52 +00:00
6fb58044fd
Map port 0x84 (which is used to generate a 2.6us delay) in isaattach().
...
Since this port is needed by at least a few drivers, export its i/o handle
via isa_attach_args.
1996-05-05 01:14:07 +00:00
0808320ac1
Fix a trivial typo.
1996-05-05 00:40:01 +00:00
0817b1b518
make it work with GUSPLAYDEBUG defined
1996-05-03 22:35:24 +00:00
1a7708a2a2
- Fix random return value in the probe function.
...
- Add <sys/systm.h> to get prototypes
1996-05-03 19:06:25 +00:00
c3c1caa12a
Remove unused err label; simplify the code in ed_probe_Novell
1996-05-03 19:05:30 +00:00
05dbb85594
cleanup the memh mess:
...
- remove it from the Novell probe.
- cleanup the 3com probe.
1996-05-03 17:29:29 +00:00
9d91d0f742
Convert the Etherlink III (ep) driver to use <machine/bus.h>.
...
For the ISA probe, implement a way to keep track of which ISA busses
have been through an ep_isa probe; the static variable that was used
before didn't scale.
1996-04-30 22:27:58 +00:00
d614ab5859
Update the 3c507 probe to the new interfaces used by elink_reset()
...
and elink_idseq().
XXX This is just a kludge until the entire driver is converted to use
<machine/bus.h>
1996-04-30 22:21:54 +00:00
91b4a6d401
Adapt the elink_reset() and elink_idseq() routines for <machine/bus.h>.
...
In elink_reset(), since some machines may have more than one ISA bus,
implement a way of keeping track of which ISA bus has received an
elink_reset(); The static variable which was used previously didn't
scale.
1996-04-30 22:16:27 +00:00
a1609dc859
- Fix gcc -Wall warnings
...
- BUG: if (error = ...() == EWOULDBLOCK)
1996-04-29 20:30:48 +00:00
1c86bef3bc
Fix gcc -Wall warnings.
1996-04-29 20:28:40 +00:00
e8a8a6298c
- prototype fixes
1996-04-29 20:02:32 +00:00
d0987b1ee9
- prototype fixes
...
- BUG: changed:
val &= CD_POL_MASK;
val | CD_POL_BIT; /* XXX if (pol) */
to:
val &= CD_POL_MASK;
val |= CD_POL_BIT; /* XXX if (pol) */
1996-04-29 20:00:39 +00:00
27292adc4c
- gcc -Wall fixes
1996-04-29 19:50:47 +00:00
c32e566f6c
- missing argument in printf
...
- gcc -Wall fixes
1996-04-29 19:48:26 +00:00
f1dd12ed4e
Prototype fixes
1996-04-29 19:45:32 +00:00
07beed1117
Fix an obvious typo (wrong sign of test). At the same time, make the early
...
probe printf prefix unambiguous.
1996-04-25 18:54:45 +00:00
aff40e2a72
Break up the ep driver into isa, eisa, and pci front-ends and a
...
bus-independent core driver. Tested on all three bus types, including
an isa 3c509 masquerading as an eisa device (use ep* at eisa? slot ? in
your kernel config file to catch this one).
XXX Driver still needs to be converted to <machine/bus.h>
1996-04-25 02:15:42 +00:00
b57c554d06
Add a hardware dependent initialization function lehwinit()
1996-04-22 02:53:28 +00:00
d7b610dca6
Fix 3c590 to use the new pci interface; the pci compat code changes were
...
slightly biffed.
1996-04-19 00:01:19 +00:00
d7d306aeb7
change LANCE copy & zero functions' names to start with amd7990_, and
...
remove their 'integrate' (usually defined to be 'static') keywords.
when lance drivers are split up by attachment, more than one file will
reference the copy/zero functions (i.e. not just the file that pulls in
am7990.c... and eventually inclusion of am7990.c should go away entirely).
1996-04-18 00:25:11 +00:00
a610e9d471
include <sys/termios.h> to make comvar.h happy
1996-04-15 18:55:23 +00:00
b6549d493d
define and export the global variable "comconscflag", the default tty
...
'cflag' for the console. Normally set to TTYDEF_CFLAG, may be
overridden by machine-dependent console attachment code, as necessary.
(Alpha uses it to set cs8 -parenb.) Files including comvar.h now
need to include <sys/termios.h>, because comconscflag is of type
tcflag_t.
1996-04-15 18:54:31 +00:00
51e85d07b9
update for addition of a machine-dependent cookie as the first argument
...
to isa_intr_{,dis}establish().
1996-04-11 22:27:59 +00:00
e6456e7285
on non-i386 systems, include <machine/intr.h> (per charles's proposal on
...
tech-kern (?)), to get the IPL_* and IST_* types. pass the machine-dependent
cookie given at attach time on to sub-devices, so they can use it to access
the interrupt functions properly.
1996-04-11 22:25:44 +00:00
a391172983
include a machine-specific header from ARCH/isa/isa_machdep.h, to define
...
the isa_chipset_tag_t type, and to define or prototype:
isa_attach_hook()
isa_intr_establish()
isa_intr_disestablish()
i.e. the machine-dependent functions to be used my MI ISA code.
Remove prototypes for the latter two functions from this file.
1996-04-11 22:20:50 +00:00
789a455ab4
if no DDB, define Debugger() to be a panic.
1996-04-10 23:01:13 +00:00
0609135a66
Add explicit return types.
1996-04-10 19:03:46 +00:00
43411d2e96
Convert to use <machine/bus.h>.
1996-04-09 00:46:15 +00:00
740637ad71
If we dequeue a packet due to excessive collisions, make sure we check
...
to see if the queue length has dropped to 0.
1996-04-08 19:02:19 +00:00
402f77d443
remove tricky open-coded variants of config_found(), by using the
...
child device pointer now returned by config_found(). (previously,
the code played games to get that pointer; now they are unnecesary.)
1996-04-04 07:08:10 +00:00
9c6e05d835
Minor optimization, and do a CLRCH after (re)selection just to be safe.
1996-04-03 15:58:13 +00:00
b82447e3e1
* Change message priorities so that ABORT comes after IDENTIFY.
...
* Add an ACB_RESET flag, so that a BUS DEVICE RESET can be queued within the
driver.
* If ACB_ABORT or ACB_RESET is set during reselection, schedule a message and
assert ATN.
* Optimize aic_datain_pio(), aic_dataout_pio() and aicintr() somewhat.
* Schedule a timeout only when we select the target, so that commands can't
time out prematurely.
1996-04-03 10:33:45 +00:00
70f35ac052
Don't wait for a command complete interrupt when enabling mailbox out
...
interrupts.
1996-04-03 09:45:45 +00:00
f0d8cbb1cb
Don't wait for the host adapter to be idle before enabling or disabling
...
mailbox out interrupts.
1996-04-03 08:48:46 +00:00
d0742ed3c5
Several things:
...
1) If we get an unexpected disconnect, issue a REQUEST SENSE, as recommended
by the SCSI-2 spec. If the target created a contingent allegiance condition,
this will clear it. Also, if it happened while sending a SDTR or WDTR message,
disable negotiation for that target.
2) Since some lame devices still don't deal correctly, make sure we deassert
ATN if our last message out is interrupted. If we get a MESSAGE PARITY ERROR,
we'll reassert ATN anyway. This should ensure that we never have to send a
MESSAGE NO OPERATION.
3) Set AIC_ABORTING only when actually sending a BUS DEVICE RESET or ABORT,
so we get better error detection.
4) Other internal reorganization of no consequence.
1996-04-01 07:24:37 +00:00
55960650f7
add include file for function prototypes
1996-03-31 22:50:11 +00:00
004f5e8d39
Fix a slight biff with 16-bit DMA in last change.
1996-03-31 20:51:43 +00:00
778f21db6a
Use `{in.out}b(iobase + ...' rather than including the base address in
...
the register definitions.
1996-03-30 16:13:24 +00:00
72f4fb5692
Fix return type of wds_sense().
1996-03-30 07:40:11 +00:00
78681855e4
This version is deprecated.
1996-03-30 05:36:32 +00:00
59e1daefcd
Working WD7000 and TMC-7000 driver, from Julian Highfield, with additional work by me.
...
Needs some refinement, but it works.
1996-03-29 20:53:30 +00:00
44baed59ef
Fix the mailbox unlock code for CF and CP.
1996-03-28 18:19:05 +00:00
dbdbd735b8
Update these (as minimally as possible) to work with new PCI interfaces:
...
(1) make pci functions take as an argument a machine-dependent
cookie, to allow more flexibility in implementation.
(use of other PCI functions, etc., left unchanged.)
1996-03-27 04:03:05 +00:00
8d60d04ffa
Remove dead variables.
1996-03-25 07:11:12 +00:00
3ab38e9ad4
Display the right sync period for fast devices.
1996-03-25 00:18:09 +00:00
dac7f9a885
Fix up a couple of printf()s.
1996-03-24 22:23:56 +00:00
e2f1ed6ef2
Various, including:
...
* Display as much revision info as we can get.
* Fix a race condition that could cause interrupts to be lost.
* Handle `out of mailbox' conditions (much) more gracefully.
* Schedule timeouts more safely.
* Add diagnostic code to (correctly) detect if a CCB times out before its
outgoing mailbox is emptied.
1996-03-24 22:20:41 +00:00
78de5226a1
lto3b -> _lto3b
1996-03-19 03:28:45 +00:00
b55176ea0c
since this driver tries to block its interrupt with spltty(), it must
...
attach that interrupt with IPL_TTY.
1996-03-18 09:14:32 +00:00
b5c1728e22
clean up <machine/bus.h> changes a bit; no real functional change.
...
prototype lpt_port_test().
1996-03-17 13:40:29 +00:00
179f65d15e
Add #ifdef's at the right places, on NCOM_ISA and NCOM_COMMULTI, to
...
only include the relevant code in the probe & attach functions. Still
one probe and one attach function, with #ifdefs, but this is a step
in the right direction and saves a few hundred bytes (ooh, ahh!).
1996-03-17 13:38:14 +00:00
94907fa254
adjust to deal with expression support for optional file specs
1996-03-17 13:21:09 +00:00
9d4db41a9f
change the name of com's attachment to commulti, and provide flags
...
for that and the isa attachment in com.h (in addition to the flag for
the presence of 'com' itself).
1996-03-17 07:30:25 +00:00
de7c200585
New device attachment scheme:
...
- split softc size and match/attach out from cfdriver into
a new struct cfattach.
- new "attach" directive for files.*. May specify the name of
the cfattach structure, so that devices may be easily attached
to parents with different autoconfiguration semantics.
1996-03-17 00:53:54 +00:00
6d9ea4cf59
New device attachment scheme:
...
- split softc size and match/attach out from cfdriver into
a new struct cfattach.
- new "attach" directive for files.*. May specify the name of
the cfattach structure, so that devices may be easily attached
to parents with different autoconfiguration semantics.
1996-03-17 00:43:52 +00:00
9f762df4e4
clean up a comment, delete unnecessary local variable in probe
1996-03-17 00:26:12 +00:00
88b335392c
rename asic_addr and nic_addr to asic_base and nic_base, in softc, as
...
they're base I/O ports, not really addresses. rather than using those
softc fields directly, assign local variables (asicbase, nicbase) to have
their values, and use those. (consistency, plus better optimization
potential in some cases.)
1996-03-16 07:24:15 +00:00
87abc9cdc7
Move contents of edprobe() into ed_find() -- they'll be used by edattach()
...
eventually. rename the probe functions for the various boards to 'find' for
consistency/correctness (but the generic8390 check is still a 'probe').
Add protos for ed_find(), ed_probe_generic8390(), ed_find_WD80x3(),
ed_find_3Com(), and ed_find_Novell(). Fix one minor space nit.
1996-03-16 06:41:20 +00:00
4beac8eab6
convert NIC_GET and NIC_PUT to take NIC base port address, rather than softc.
1996-03-16 06:18:39 +00:00
f3bac4c1fb
print out hardware type, and print firmware version more precisely.
...
Information about structures & commands to do this gleaned from
the FreeBSD bt driver.
1996-03-16 05:33:28 +00:00
c3361cbc2c
prototype bt_cmd(), using varargs/stdarg (ooh, ahh!). Fix up resulting
...
pointer warnings.
1996-03-16 04:37:40 +00:00
8b3873367f
add MediaVision Jazz16 chipset support. It must be configured with
...
'flags 1' on the sb? kernel configuration file line (because it frobs a
noncontiguous IO port to configure the Jazz16 extensions).
Also, remove static sb_device structure and fill in user's buffer on
each request.
1996-03-16 04:00:09 +00:00
76f1f884eb
convert to not assume existence of softc at probe time.
1996-03-16 03:20:25 +00:00
8b404fdede
A foolish consistency... General cleanup: get rid of spaces and tabs at
...
ends of lines, turn aligned blocks of eight spaces into tabs, name all
softc elements with the "sc_" prefix, and call the softc by the commonly
used name, "sc", when passing it around.
1996-03-16 02:54:27 +00:00
6668fa09a3
Change register definitions to be offset from the I/O base, rather than
...
complete I/O addresses. Access ports via "iobase + REGISTER."
1996-03-16 02:02:54 +00:00
2b96f0705b
delete unused cruft (the 'software conventions' chunk).
1996-03-16 02:00:43 +00:00
85286bff2f
convert these to use new <machine/bus.h> interfaces. This involved
...
substantial reworking of the multi-port drivers, as they need to frob
bits in the io-port spaces of their children. As a result, the
commulti->com attachment interface is substantially more complex.
(This may be fixable in the future by making some of the code common,
but as long as io-port allocation checking is planned, it's necessary.)
1996-03-10 09:01:20 +00:00
5bfb840114
Fix copyright year
1996-03-09 23:37:14 +00:00
85288c6a61
Include comvar.h, for comprobe1() prototype and for commulti_attach_args.
...
Remove multiple identical definitions for the arg struct used by multiport
boards' to attach slave com ports.
1996-03-09 01:03:59 +00:00
a7c6dfe1cd
include comvar.h for comprobe1() prototype
1996-03-09 01:02:08 +00:00
56edbfc4f9
define the common structure used to attach 'com' units as slaves to
...
multiport cards. prototype comprobe1(), which is used by multiport card
drivers.
1996-03-09 01:01:33 +00:00
645d83b763
minor cleanup. mostly: use COM_NPORTS and a new (driver-specific) NSLAVES
...
macro where appropriate. No point in hard-coding numbers in multiple places.
At the very least, this makes the drivers slightly easier to diff/understand.
1996-03-09 00:09:04 +00:00
2c11ad408c
convert to use I/O mapping/access macros in <machine/bus.h>.
...
Mostly mechanical changes, except for probe/attach, which have
to map (and, in the case of probe, unmap) the I/O space that the
chip will use.
1996-03-08 22:17:58 +00:00
b1d3f7607c
remember the bus_chipset_tag_t given by our parent, and pass it on to
...
children.
1996-03-08 20:36:21 +00:00
5087096150
pass a bus_chipset_tag_t (defined in <machine/bus.h>) to the bus when
...
attaching, and to the devices when attaching them. #include <machine/bus.h>
to make this backward compatible with old #include requirements.
Also, clean up idempotency so that isa/eisa/pci "var.h" headers are
consistent (make them all idempotent).
1996-03-08 20:25:22 +00:00
acabb62791
the i386 port no longer attaches isa, eisa, and pci at root.
1996-03-04 03:29:12 +00:00
d8026ad9ef
Oops; switched two bits.
1996-03-01 04:35:27 +00:00
f3b29ca5d2
Remove two unneeded `if's.
1996-03-01 04:13:25 +00:00
thorpej