4b0c3e182c
Fix a typo in an constant name that is currently unused.
2000-10-16 23:03:45 +00:00
a5e3251d5f
Register definitions for the Middle Digital, Inc. PC-Weasel
...
serial console board.
2000-10-16 22:59:24 +00:00
d01f7f6e2b
correct memory size to be mapped. PR 11242.
2000-10-16 10:26:41 +00:00
c64069308b
Make changes relevant to changes in WWN defaults.
...
Also fix egregious bug where we would never decrement
the islocked recursion counter. I guess this means
that we don't recurse on this platform! All of this should
go away when we have real lock primitives to use in drivers.
2000-10-16 05:18:15 +00:00
c7c2783178
Change some of the WWN macros- eliminate PORT_FROM_NODE_WWN and make
...
sure we have a DEFAULT_{PORT,NODE}WWN and ISP_{NODE,PORT}WWN macro
as a requirement for all platforms.
2000-10-16 05:16:56 +00:00
ffdbddbd79
Add in commented-out hiwater measurement.
...
Remove egregious older bug which had us refusing to log into
fabric devices unless they were NL ports. Whuff.
2000-10-16 05:15:55 +00:00
298ec0ecd9
Clarify/cleanup how node and port names are derived from nvram. Remove
...
clause 2 of licence. Remember to print initiator ID (LOGINFO level).
2000-10-16 05:15:05 +00:00
7cc31292b3
Turn on 32 byte bursting for ISP
2000-10-16 05:13:13 +00:00
3607efd3d7
Remember to establish default PORT WWN. Add in some LOGDEBUG2 messages
...
for the dma mapping code.
2000-10-16 05:12:26 +00:00
8ddb5fd594
roll SBus f/w to latest released level (1.37)
2000-10-16 05:10:37 +00:00
4318834442
Don't trim off the FCS, pass it up.
2000-10-15 19:56:31 +00:00
b4bbac9584
add Ricochet GS USB modem
2000-10-15 17:53:17 +00:00
83666f01fa
Shuffle printfs around so they look right when we've got a drive attached.
2000-10-14 23:45:57 +00:00
b885772956
The input packet has the FCS attached to set M_HASFCS before passing up.
...
Revove eh = ... since it's no longer used.
2000-10-14 20:06:02 +00:00
ca7bd5f302
Make sure wsmouseopen() returns ENXIO when no VSXXX mouse is attached.
2000-10-14 08:51:51 +00:00
c8d4a6140c
Regen
2000-10-14 06:23:21 +00:00
30dbba4dd1
Add ATI Mobility M3 (both PCI and AGP).
2000-10-14 06:12:46 +00:00
6e67f82712
Fix wi_intr() to avoid touching card registers during insert/remove events,
...
when sharing an interrupt with other devices:
check sc->sc_enabled, and drop the interrupt if its' off.
Also check for IFF_RUNNING, on advice of Enami Tsugotomo.
2000-10-13 19:15:08 +00:00
86974d7235
Regen.
2000-10-13 18:16:53 +00:00
67c8e3701d
A bunch of scanners.
2000-10-13 18:16:36 +00:00
764c5e3eea
Recognize HP 5300C.
2000-10-13 16:18:48 +00:00
8abfde6138
Regen.
2000-10-13 16:18:22 +00:00
54480a36e4
Add HP 5300C.
2000-10-13 16:18:02 +00:00
2898929f94
Revert previous since the finnish keymap is already present under
...
the name "sv". Note to myself: Read PRs completely before acting.
Note to Santa Claus: I want a mailing list that carries all follow
ups to PRs!
2000-10-13 12:53:23 +00:00
b5b3e28ce7
Add uscanner.
2000-10-13 12:31:10 +00:00
3a05d9ba7b
Avoid empty strings for vendor&product.
2000-10-12 23:11:04 +00:00
4ed4915295
Regen.
2000-10-12 22:51:42 +00:00
0b0fb8e466
Add Kingston KNU101TX Ethernet adapter.
2000-10-12 22:51:20 +00:00
06ab77c680
typo fix in comment (stallen -> stolen)
2000-10-12 12:42:52 +00:00
8a9e5b82d3
typo in comment (consifuration -> configuration)
2000-10-12 12:42:03 +00:00
38fd6528ac
Add finnish keymap, from Heikki Kallasjoki in PR/11186.
2000-10-12 12:41:22 +00:00
3a909c64a6
Use splnet instead of splimp in wi_ioctl.
2000-10-12 04:50:58 +00:00
4c00a9d6aa
Bail out initailzation on buffer allocation failure.
2000-10-12 03:29:59 +00:00
fc40c38df6
Minor fixup for a printf(). Noted by Robert Elz.
2000-10-12 03:28:49 +00:00
32e7a2cd70
hifn7751 crypto card driver. from openbsd.
...
does nothing useful at this moment - initailize the chip, that's all.
TODO: crypto logic framework in kernel (see openbsd sys/crypto)
TODO: ipsec frontend (need major rework in ipsec tree - should start with busywait)
TODO: character device frontend
2000-10-12 02:59:59 +00:00
8d7ce38746
regen
2000-10-12 02:54:13 +00:00
429b0af909
pci device ID for hifn 7751-based crypto cards. from openbsd.
2000-10-12 02:52:58 +00:00
b204f9e433
Use ether_ioctl.
2000-10-12 02:24:08 +00:00
2383226766
Silence format warning.
2000-10-11 22:03:33 +00:00
2198741306
Use ether_ioctl().
2000-10-11 16:57:45 +00:00
fcde56c9ba
Add flags to indicate that tlp_init() should set some more BUSMODE bits.
...
TULIPF_BLE /* data is big endian */
TULIPF_DBO /* descriptor is big endian */
These setting is required for Big-endian bus front-end (such as APbus for
newsmips) to work with tulip. Also,
sc_maxburst
member is added to the tulip_softc to limit the maximum burst length.
This member defaults to zero which means no restriction for burst length.
2000-10-11 14:59:52 +00:00
0abaf0f210
Fix compilation errors: unused variable & missing function return values.
2000-10-10 23:33:52 +00:00
41bb27ce0d
Regen.
2000-10-10 12:38:24 +00:00
1f06d9f822
Another vendor&product code.
2000-10-10 12:38:00 +00:00
8adc2fb7f3
Don't free unallocated pointer in detach (can happen if detach happens
...
before attach has finished).
2000-10-10 12:37:01 +00:00
b69ea2a63d
make it work right on non-32bit arch. from kjc@csl.sony.co.jp
2000-10-10 10:15:00 +00:00
64c818a7e2
Emit a warning when a symbol is undefined.
2000-10-09 15:57:56 +00:00
db6fba6bdf
Move inclusion of rnd.h and sys/rnd.h from tulip.c to tulipvar.h.
2000-10-09 14:31:01 +00:00
ca88e2b6bd
Make tulip a random source.
2000-10-09 12:54:28 +00:00
cc577ca5c6
Regen.
2000-10-08 23:57:10 +00:00
b132b36f4d
Add a few more devices (from FreeBSD).
2000-10-08 23:56:53 +00:00
62fb025c5c
Regen.
2000-10-08 21:26:47 +00:00
447c19ac22
Add another DLINK adapter.
2000-10-08 21:26:26 +00:00
966f1692e1
Don't use a plural `s' if there is only one button.
2000-10-08 20:52:18 +00:00
b6db5a8622
Regen.
2000-10-08 20:51:30 +00:00
3598b417a3
Add a Fuji camera.
2000-10-08 20:51:00 +00:00
a3dbabc67b
Update for current PCI device class/subclass and capability codes.
...
(also, tweak the I2O subclass string to be "standard" -- the removal
of version info didn't extend that far.)
2000-10-07 18:58:13 +00:00
34f3869cdc
Change int->bus_addr_t in com_kgdb_attach() prototype.
...
Compiles again with KGDB enabled.
2000-10-06 21:12:01 +00:00
f6bf6762ab
Ops, disable debugging messages.
2000-10-06 20:07:10 +00:00
c8ad9b6302
Regen
2000-10-06 16:39:22 +00:00
171adcf634
Fix recurent typo: shed->sched
2000-10-06 16:39:04 +00:00
e353a6d9b2
Adapt for reselect handling from the script. While here, fix typo
...
(SIOP_SCXFER -> SIOP_SXFER).
2000-10-06 16:35:13 +00:00
eae96f0267
Regen
2000-10-06 16:31:31 +00:00
c67eef4e7d
Handle reselect entirely in script; for this provide a script area,
...
modified by the driver, which will load the appropriate DSA for a given
target/lun.
2000-10-06 16:31:17 +00:00
5df1120c67
Add some more completion status codes.
2000-10-05 11:23:05 +00:00
2e6cb6a878
When 802.1Q MTU, we have to ignore the Frame Too Long errors, and there's no
...
need to disable RWT and JAB.
2000-10-05 07:22:43 +00:00
7ce859b8d0
Allow 16-bit only speakers to work.
2000-10-05 01:35:07 +00:00
cc135eb39f
Add MI mk48txx.
2000-10-04 18:44:24 +00:00
d11ef545cd
Enable sanity checks in mk48txx_gettime().
...
(Many news68k have dead NVRAM.)
2000-10-04 17:00:45 +00:00
a2c02690af
only VT82C586A rev >= 6 supports Ultra-DMA. From OpenBSD.
2000-10-04 09:34:09 +00:00
5d4d9ec965
Update with uscanner.c
2000-10-04 02:45:07 +00:00
c068cf3953
Regen.
2000-10-04 02:09:37 +00:00
9d09a17e7c
Add more vendors.
2000-10-04 02:09:07 +00:00
5fcde4924f
Support ETHERCAP_VLAN_MTU by igorning Receive Watchdog and Transmit Jabber
...
errors if VLANs are configured on the interface.
2000-10-03 23:35:55 +00:00
cbfe7605c9
Support ETHERCAP_VLAN_MTU by doing extra error checking upon packet
...
reception and saving other "bad frames" (i.e. ones that are larger
than the standard Ethernet frame length) if we have VLANs configured
on the interface.
2000-10-03 23:35:02 +00:00
5d4fa9b0ce
Revert rev 1.31 of bha.c (and associtated changes in the headers and
...
config glue files).
Fixes PR kern/9841. Tested by Tracy J. Di Marco White with a bt948
and 6 disks.
2000-10-03 14:07:36 +00:00
91959d389e
Typo in comment.
2000-10-03 13:54:02 +00:00
33e8ebeef3
1970 -> POSIX_BASE_YEAR
2000-10-03 13:52:39 +00:00
df9baa1d7a
Move #define POSIX_BASE_YEAR to clock_subr.h.
2000-10-03 13:41:07 +00:00
5c0aabad0d
For SECDAY, use "24 * 60 * 60" rather than "86400".
2000-10-03 13:00:30 +00:00
623aae812b
Only probe for drive 0. Fix es problem reported by Nathan Williams
...
<nathanw@MIT.EDU>.
2000-10-03 04:33:03 +00:00
7edd5d54bc
Add support for the ADMtek AN983 and AN985.
2000-10-03 04:32:00 +00:00
4462a44b87
Regen: ADMtek AN985
2000-10-03 02:59:05 +00:00
618e7b93c6
Add ADMtek AN985 10/100 Ethernet.
2000-10-03 02:58:30 +00:00
10da4aa927
Add MI md_root.c, per discussion on tech-kern.
2000-10-02 15:22:32 +00:00
903ae58e7b
I2O subclasses currently have nothing to do with the protocol version.
2000-10-02 14:48:13 +00:00
1af3d80bce
fix compilation without INET.
2000-10-02 03:53:07 +00:00
7ca3fb9ef0
Move the check for "promisc + unicast + not for us" into ether_input(),
...
and change Ethernet drivers to always pass all received frames to
ether_input() (with a few exceptions, which are documented in the
code).
2000-10-01 23:32:39 +00:00
3e401aa14d
upl(4) is a IPv4 only device.
2000-10-01 11:35:28 +00:00
dcfcbaf8ae
- Add ioctl commands to wsdisplay which set/get some LCD status,
...
backlight, brightness and contrast.
- Add 9 command key symbols which make wskbd to call wsdisplay's
iocontrol.
- Add special key map variant KB_MACHDEP. This variant does not
have any real keymap but it's just a placeholder for machine dependent
maps which will be overwrite by machine dependent keyboard driver.
2000-10-01 03:29:12 +00:00
9a37177d17
fix 16BPP support (for next68k), from Timm Wetzel.
2000-09-29 06:29:47 +00:00
710c43c745
6 -> ETHER_ADDR_LEN
2000-09-28 10:56:57 +00:00
f4ef578da7
6 -> ETHER_ADDR_LEN
2000-09-28 10:29:42 +00:00
ab9b015dce
6 -> ETHER_ADDR_LEN
2000-09-28 10:10:14 +00:00
b4b2cdf575
Replace misused DIAGNOSTIC with WI_DEBUG.
2000-09-28 06:29:41 +00:00
2f625bf43f
Remove unnecessary and commented out code.
2000-09-28 06:24:48 +00:00
af7ddd3659
Set up the physical addresses for DMAPTR/NEXTPTR before adjusting for
...
unaligned transfers and adjust the physical address to align the transfer.
If the buffer end just crossed the page boundary, the computation of the
NEXTPTR physical address resulted in using -1. The cleanup at the end of
the DMA transfer would try to copy the residual data to physical address
0x1ffffffc. This would silently corrupt data on the R3000 and usually
would hang the R4000.
2000-09-28 03:11:29 +00:00
64d672931e
Regen.
2000-09-28 01:27:16 +00:00
6f2ac8aed1
Add a couple of Apple products.
2000-09-28 01:26:49 +00:00
4a8619ae15
Match the i82562.
2000-09-27 10:54:55 +00:00
64f1d1a42f
Add missing cast of ms to (struct device *) in ms_deviopen and ms_deviclose
2000-09-27 10:31:42 +00:00
815d8f961b
Regen.
2000-09-27 02:15:30 +00:00
c3fa0043b1
Add some ATI Rage cards and some Intel chips.
2000-09-27 02:14:54 +00:00
91178eae70
Add missing '&& defined(COM_MPLOCK)'
2000-09-26 14:12:42 +00:00
44c90f4ef1
Pasto; shouldn't have bitten anyone.
2000-09-26 11:38:47 +00:00
d52ba1b85f
Fix merge lossage in disabled code.
2000-09-25 01:07:25 +00:00
5eb24d5dd0
am7990[0]_intr(): only print the "entering with isr=XX" debug message
...
if compiled with LEDEBUG > 1
2000-09-24 18:37:22 +00:00
70c8ada2ad
Add calls to ether_addmulti and ether_delmulti. This code looks a bit
...
different than other drivers due to the way ti_setmulti manages the
filters. Patch from Keijiro Ehara.
2000-09-24 14:19:52 +00:00
5fea96167f
use new generic bootverbose instead of local definition
2000-09-24 12:37:03 +00:00
9623e356f0
Recognize Acer 320U.
2000-09-24 03:22:47 +00:00
fc015f6833
Regen.
2000-09-24 03:22:26 +00:00
641ee8fd93
Add another scanner.
2000-09-24 03:21:55 +00:00
d71044b313
Don't give up so easily if the device does not respond properly.
...
Mostly from Nick Hibma (FreeBSD).
2000-09-24 02:08:38 +00:00
f2a2c14d9a
Recognize Sony memory sticks (from FreeBSD).
...
Add timing info in the debug output.
2000-09-23 21:03:00 +00:00
d9c7baa183
Add a way to do control transfers on other pipes than the default pipe.
2000-09-23 21:02:04 +00:00
6417d32d9d
Avoid "bandwidth reclamation" for control transfers. The kue device chokes
...
on it.
2000-09-23 21:00:10 +00:00
c412966bb3
Fix puctuation.
2000-09-23 20:24:47 +00:00
0fab9d10ca
Regen.
2000-09-23 18:42:05 +00:00
a5570006bc
Add some more vendors.
2000-09-23 18:39:41 +00:00
6a71867356
Add `COM_MPLOCK' option to use a device-instance-specific spinlocks
...
when running at splserial(). This is a temporary measure (until
there's a MP-safe interrupt handling structure); until then, it should
be used when MULTIPROCESSOR and IPL_SERIAL > IPL_SCHED.
2000-09-23 17:17:11 +00:00
a48f581877
Substantial overhaul, factoring out of common code, removal of redundancy
...
and general cleanup. Still not a beautiful driver, but one I'd be willing to
introduce to my parents now.
2000-09-23 15:13:02 +00:00
65c1db338c
paddr_t -> bus_addr_t in prototypes too.
2000-09-23 12:08:16 +00:00
770f6e2ae3
Add RCS Id.
...
The driver initially came from Nick Hibma (FreeBSD), which I forgpt to
mention in my initial commit.
2000-09-23 05:05:31 +00:00
23116295f4
Remove some // type comments.
2000-09-23 04:33:04 +00:00
e832785e4b
Add USB scanner driver.
...
XXX Not tested yet.
2000-09-23 04:32:23 +00:00
382141e2f7
Add a new, optional method to scsipi_adapter (scsipi_accesschk()), and use
...
it when considering whether to attach devices. This is to facilitate
`non-SCSI' RAID controller drivers that want to provide SCSI pass-through
services to the kernel.
2000-09-22 16:45:17 +00:00
d651adf44a
paddr_t -> bus_addr_t.
2000-09-22 14:46:38 +00:00
cf3c3f9410
Rename to match Ben's naming scheme.
2000-09-22 05:48:50 +00:00
4b45dfbb69
Fix a device diconnect bug found by Christian Groessler <cpg@aladdin.de>.
2000-09-22 02:34:58 +00:00
c28a7b93c0
Support for Sun Keyboard/Mouse line disciplines.
2000-09-21 23:40:47 +00:00
56cf963264
Support for SPARC machines with `su' devices.
2000-09-21 23:27:32 +00:00
ac3f296768
Guts of the Sun Keyboard/Mouse line disciplines.
...
N.B. They don't recognize L1-A yet.
2000-09-21 22:25:08 +00:00
f3ef35c447
Add rudimentary 80C04 support (basically saying "Oh look, an 80C04!").
...
Move printing the initial ":" into the board driver, like i82586.c does.
Don't bother printing the amount of RAM, as it's always 64 KB.
2000-09-21 22:20:38 +00:00
a429573227
Some more register definitions for the DP83815.
2000-09-21 04:05:43 +00:00
3ee0550572
convert tsleep()->ltsleep(), which makes the kernel complain less
...
when compiled with LOCKDEBUG.
2000-09-21 01:45:46 +00:00
014e17fbdc
Correct a few calls to VOP_CLOSE().
2000-09-21 01:37:35 +00:00
236deb1acc
Apply a patch from the driver author (originally from OpenBSD).
2000-09-20 14:33:48 +00:00
e925979f9b
Preliminary support for the National Semiconductor DP83815 10/100
...
Ethernet chip, which is based on the SiS 900 core, but with differences
in the PHY and filter programming interface, and different WoL and
802.3x flow control programming.
This chip appears on new NetGear FA-312TX cards. Thank goodness
they're finally ditching the LiteOn chips.
2000-09-20 05:44:48 +00:00
b8675d1bea
Add additional register defintions for the National Semiconductor
...
DP83815, which is based on the SiS900 core.
2000-09-20 02:08:44 +00:00
3486500f77
repair multicast filter setup. PR 11037 from Ryoji Kato.
2000-09-20 01:26:14 +00:00
24f4ce3eb0
Regen.
2000-09-20 00:46:35 +00:00
6cc3e82c48
Add National Semiconductor DP83815 10/100 Ethernet.
2000-09-20 00:46:10 +00:00
4b85232148
MI seeq8005 attribute.
2000-09-19 20:23:34 +00:00
c5d8401866
Add support for the 3c555, 556 and 556B MiniPCI cards. Based on the
...
cardbus code and the FreeBSD xl driver.
2000-09-19 01:15:06 +00:00
af02376ac9
Regen.
2000-09-19 01:11:38 +00:00
fbf3c412e4
Add IDs for the 3c555, 556 and 556B 3Com MinPCI Ethernet cards.
2000-09-19 01:10:48 +00:00
d9e2aff0df
Add explicit config values for 8 bit and offset EEPROMS, since this
...
property is now shared with the PCI frontend.
2000-09-19 01:10:12 +00:00
40aba7cd4d
Split the arm26 Ether3 (ea) driver into an MI driver for the SEEQ 8005 chip,
...
and a front-end driver for the Ether3. Only semantic change is to remove
ea_claimirq() and ea_releaseirq() on the grounds that the seem too spurious
to warrant a callback to the front-end.
2000-09-18 20:51:14 +00:00
faf55ac40c
Change tiocm_to_{com,zs}'s second argument to u_long to match with
...
the type in their caller.
2000-09-17 22:07:39 +00:00
60095a9e92
regen.
2000-09-16 11:46:17 +00:00
de4b3b44f1
delete "128MB"
...
same products number; 32MB,64MB,128MB
2000-09-16 11:45:38 +00:00
8debbc34ab
Change the second argument of tiocm_to_ucom to u_long,
...
since the second argument of ioctl is a u_long value.
2000-09-15 17:03:24 +00:00
a960881851
-make the default screentype override less invasive, call it
...
VGA_CONSOLE_SCREENTYPE because the screen types are hardware specific
and make it affect the console only (no need to change runtime
behaviour), don't call vga_setscreentype() unless necessary (to avoid
trouble with strange hardware - PR kern/11025)
-some beginnings of ISO-7 (greek) font support
2000-09-15 14:13:01 +00:00
8d027cedf8
add definitions for ISO-7 (greek) support
2000-09-15 14:09:10 +00:00
c1682ac85d
Recognize Rio 600.
2000-09-14 03:13:21 +00:00
95cbe2c829
Regen.
2000-09-14 03:11:52 +00:00
d28bd1b67f
Ad some new devices and change vendor name from SUPRA to DIAMOND2.
2000-09-14 03:11:23 +00:00
9b8c74f603
regen for trek thumbdrive
2000-09-14 00:04:15 +00:00
494592f30d
Add Trek Technology ThumbDrive (128MB)
2000-09-14 00:02:56 +00:00
dd9df6ffdf
Use correct product id for VIA VT6102 chip. Problem pointed out by
...
Jaromir Doleeek in private e-mail.
2000-09-13 16:40:15 +00:00
dcdc66f936
Regen.
2000-09-13 15:58:13 +00:00
b9bacc07be
Add product IDs for AMI MegaRAID boards.
2000-09-13 14:45:09 +00:00
d4a2e19802
Add support VIA VT6102 chip found e.g on the D-Link DFE530TX NIC.
...
Fixes PR kern/11001 by Petter Lindquist.
2000-09-13 14:00:48 +00:00
ea2fc5c0fd
Regen.
2000-09-13 13:58:25 +00:00
928a30552d
Remove incomplete (and incorrect) entry for D-Link 530.
2000-09-13 13:58:06 +00:00
e6debfdcbf
Regen.
2000-09-13 13:53:22 +00:00
a42050f3e7
Use "VT6102 (Rhine II) 10/100 Ethernet" as description to be consistent
...
with existing entry for "VT86C100A (Rhine-II) 10/100 Ethernet".
2000-09-13 13:53:06 +00:00
0c0911bb54
Regen.
2000-09-13 13:48:44 +00:00
d6cf9f28b0
Add VT6102 Rhine II 10/100BaseTX ethernet chip used on e.g. the
...
D-Link 530TX NIC.
2000-09-13 13:48:09 +00:00
8b74873d54
Cleanup the error handling code introduced in rev. 1.26. Commented by jhawk.
...
No functional change.
2000-09-13 05:17:14 +00:00
bf7a6e6857
Found glyph pixel order inverted on screen.
2000-09-13 02:11:14 +00:00
aa6df7169b
yank error.
2000-09-12 19:13:30 +00:00
c8321c45a7
Found glyph pixel order inverted on screen.
2000-09-12 09:45:48 +00:00
9466b8d07e
Define an auto variable `bn' as off_t instead of int since it is finally
...
converted to byte offset.
2000-09-12 08:03:24 +00:00
6502a2efd8
Clean-up: Remove unnecessary global reset (for debug) and change the
...
name of some variables for the consistency of naming rule.
2000-09-12 03:19:51 +00:00
32802fc83f
Be consistent: use mcpair->cond instead of mcpair->flag.
...
This also lets us clean up a bunch of cruft.
2000-09-11 02:23:14 +00:00
e8645831a5
Only reset the timer value if it actually accumlated time.
...
Otherwise it may never accumulate any time, and the recon delay
will never happen.
2000-09-11 00:22:45 +00:00
6439b28202
* rename vga_stdscreen* -> vga_25lscreen*
...
* in vga_init(), set the screen type to WSCONS_DEFAULT_TYPE, which defaults
to "80x25".
XXX: the code currently makes no attempt to ensure that a font
with the appropriate width & height is available, effectively
limiting this default to either "80x25" or "80x24" at this
time.
* make wsdisplay_screentype_pick() non static, so that vga_init() can use it
2000-09-10 11:44:13 +00:00
7381ac703b
KNF - variable declarations.
2000-09-10 10:43:53 +00:00
ed9f910cc8
Introduce WSDISPLAY_NULLSCREEN to allow low level device to detach control
...
process. Hpcmips frame buffer driver(hpcfb) call wsdisplay_switch with
WSDISPLAY_NULLSCREEN to notify user process of suspend/resume event.
2000-09-10 09:39:57 +00:00
f7d700a127
Make the control line handling a little better. Avoid a DTR/RTS issue
...
from uninitialized sc_mcr by not calling ucom_{dtr,rts} if possible.
XXX Flow control is still incomplete and needs more work.
2000-09-10 03:10:20 +00:00
59178ec7b4
Use dev/{rasops,wsfont} instead of awesome dev/rcons. Still much to do
...
before being useful.
2000-09-09 06:15:17 +00:00
48ff19c98b
u_char -> u_int for function argument and return of Zilog register
...
manipulation helper functions; no loss, no gain, for Alpha processor.
2000-09-09 06:08:42 +00:00
665eca96e0
In wsdisplay_usl_ioctl2(), use a u_long for the request to be passed off
...
to wsdisplay_internal_ioctl() instead of an int.
With this, the pcvt compat ioctl's work on an Alpha and probably other
64 bit archs.
2000-09-08 15:32:57 +00:00
237007cd69
- Set CCB_ACTIVE flag in all cases when DIAGNOSTIC is defined.
...
- Correct arguments to bus_dmamap_create().
2000-09-08 12:16:17 +00:00
6bc11dce71
In ucomopen(), make sure to call splx() before returning
...
when initialization fails.
2000-09-08 07:20:52 +00:00
3fa62c4642
Make sure we are passing a locked vp to VOP_CLOSE.
2000-09-08 01:36:35 +00:00
19f36696bc
ANSIfy last patch.
2000-09-08 01:27:12 +00:00
96d1acf3d6
Add isoc support. From FreeBSD via Berndt Josef Wulf <wulf@ping.net.au>
2000-09-08 00:55:26 +00:00
f0c15086d2
Regen.
2000-09-07 23:26:41 +00:00
36d7d0f902
s/AT&T Microelectronics/Lucent Technologies/
2000-09-07 23:26:28 +00:00
9a43fc6477
Regen.
2000-09-07 04:00:21 +00:00
006df0f4cb
Add scores of scanners (from FreeBSD).
2000-09-07 03:59:55 +00:00
08e45b3689
Cast the argument to vtophys() to vaddr_t.
2000-09-06 18:56:45 +00:00
e79103cb0a
Cast the arg to vtophys() to vaddr_t.
2000-09-06 18:48:36 +00:00
2a11ec9347
Add definition for "Actiontec 56K PCI Master", from Bill Hudspeth.
2000-09-06 15:27:37 +00:00
130aad8a7d
ANSIfy.
2000-09-06 00:17:23 +00:00
6c0346a534
Regen.
2000-09-05 22:39:59 +00:00
0b631b84eb
Add a Logitech trackball.
2000-09-05 22:39:16 +00:00
3cf4e948c1
Cast arg to vtophys() to vaddr_t.
2000-09-05 22:37:33 +00:00
4171157155
Clean-up card-type depend code.
2000-09-05 09:01:17 +00:00
6ade619f58
Regen.
2000-09-04 20:44:37 +00:00
176549d557
Add Intel 440GX host bridge.
2000-09-04 20:30:50 +00:00
fe2b627962
Fix 'RAID unsupported' printf.
2000-09-04 20:21:30 +00:00
ac5ac55b06
Add support for the AAA-131 RAID controller by treating it as a 7890.
...
Taken from rev 1.32 of the FreeBSD ahc_pci.c.
2000-09-04 19:56:04 +00:00
824ddfd20e
regen
2000-09-04 13:13:36 +00:00
4f6829605c
Brooktree Bt8474 Multichannel Synchronous Communictaions Controller (MUSYCC)
2000-09-04 13:13:14 +00:00
572e9e2f80
Move ym_mixer_set_port() (if used) during attach AFTER initialization of
...
power ctl stuff, or it makes unwanted changes to the CODEC settings.
2000-09-04 00:57:17 +00:00
5cf4edb506
Handle output packet headers in a cleaner way. From IWAMOTO Toshihiro
...
<iwamoto@sat.t.u-tokyo.ac.jp>, fixes kern/10573.
2000-09-03 19:15:45 +00:00
b2af314f55
Add a few more defines. From Nick Hibma and FreeBSD.
2000-09-03 19:09:14 +00:00
c384f772f0
remove one
2000-09-03 02:05:44 +00:00
3a2e8fdc05
Use NetBSD's pcidevs file for vendors/cards as much as possible.
...
Recognize Pinnacle Studio PCTV Rave as Miro card, tested by rh@netbsd.org .
2000-09-03 02:01:32 +00:00
cfd89531b4
don't attempt to size Host Bridge BARs. (it's a good way to die.)
...
provide a clue about 16-bit vs. 32-bit I/O BARs.
2000-09-02 00:48:20 +00:00
6a22a36219
regen for changed pcidevs
2000-09-02 00:33:25 +00:00
dae6b41d27
after discussion with veego, rename constant for 3D Labs Permedia 2 from
...
PERMEDI2 to PERMEDIA2. (substance over style. 8-) Also, fix a typo
I noticed in a comment.
2000-09-02 00:32:15 +00:00
0d01e04003
Add support for write protecting clock registers.
2000-09-01 19:04:49 +00:00
ec322f95aa
Regen.
2000-09-01 17:19:36 +00:00
6dd2f101ad
Et763 -> Bt763
2000-09-01 17:19:25 +00:00
e9bc438c50
- Simplify eisa_devinfo().
...
- New KNF.
2000-09-01 17:18:20 +00:00
641326ee44
-fix multicast filter programming
...
-support access to MII_ANER too for completeness
-remove some hacks which disappeared in FreeBSD if_rl.c
rev. 1.25 (Aug 31 14:45:49 1999)
(the driver could need more updating, but this is what I've tested
for months)
2000-09-01 15:07:23 +00:00
f729f26133
FLUSH_CACHE will not return until complete.
2000-09-01 14:17:15 +00:00
40f6cd2b96
The `cac' driver now frees CCBs on our behalf.
2000-09-01 12:23:57 +00:00
688e72faf1
Add an EISA bus front-end for the `cac' driver.
2000-09-01 12:15:20 +00:00
702747900f
- Interface cleanup. static, const in places.
...
- cac_pci_l0 has been moved to cac.c, since it's useful for EISA boards.
- Model-specific linkage now is responsible for DMA synchronization.
- If we don't recognise the board, print the subsystem ID.
- Add support for RAID LC2 and Smart Array 431.
- Start firmware background tasks on controllers that need it.
2000-09-01 12:13:08 +00:00
671d7f91ae
- Interface cleanup. static, const in places.
...
- Move convenience macros from cacreg.h to cacvar.h.
- Add one hardware check in DIAGNOSTIC case.
- Declare `cac_l0'.
2000-09-01 12:12:29 +00:00
ac2883e218
- Interface cleanup. static, const in places.
...
- Pull in linkage useful for both PCI and EISA boards from cac_pci.c.
- cac_ccb_done() now frees the done CCB if the CCB callback completes.
- Model-specific linkage is now responsible for DMA synchronization.
- Use wakeup_one() in cac_ccb_free().
- Start synchronous commands `manually'.
- Add one hardware check in DIAGNOSTIC case.
- Improve error messages.
- Start firmware background tasks on controllers that need it.
2000-09-01 12:11:37 +00:00
d8e5466776
- Move convenience macros from cacreg.h to cacvar.h.
...
- Define EISA board register set and some other magic numbers.
- Add missing elements to `struct cac_controller_info'.
2000-09-01 12:10:21 +00:00
0bc8e23c3a
even through the integrated audio on my MSI 694D Pro
...
does not set AC97_CODEC_DOES_VRA in AC97_REG_EXT_AUDIO_ID request, it
works okay; only require the bit set for revision < 'H'
2000-09-01 00:02:04 +00:00
ea9ef4ff69
Correct LED polarity bit. This bit and PHY power bit should be
...
defined in elinkxlreg.h.
2000-08-31 08:42:29 +00:00
25147761ff
Add support 3C[CX]FE575CT.
2000-08-29 08:54:50 +00:00
4739c00231
regen
2000-08-29 01:18:17 +00:00
52454a3dd6
add vendors HAUPPAUGE, ASKEY, AVERMEDIA
2000-08-29 01:17:06 +00:00
a020e8fbb5
regen
2000-08-28 17:44:33 +00:00
8b242e878a
add entry for SupraExpress 56i Sp V.90, as sent in kern/10902
2000-08-28 17:43:59 +00:00
00305bb997
provide some randomness
2000-08-28 13:25:22 +00:00
403941c60d
Regen to correct wrong keyword.
2000-08-28 10:35:59 +00:00
7591b1332b
Correct wrong keyword.
2000-08-28 10:33:58 +00:00
128fa6e8fb
Correct PCI interrput setup routine for Texas Instruments PCI113X.
...
Now PCI113X is able to handle hot insertion and deletion properly.
2000-08-28 09:26:38 +00:00
21ddff737c
Regen.
2000-08-28 09:18:09 +00:00
86063b7c73
Add 3Com 3C656 LAN + MODEM CardBus cards.
2000-08-28 08:59:49 +00:00
37c83e1340
fix some missing initializations
2000-08-27 21:43:26 +00:00
194bbc3c5d
Don't bcopy() from luserland.
2000-08-26 20:08:22 +00:00
a0f2ab32f7
Make 64-bit clean.
2000-08-26 16:02:06 +00:00
ce7a425d77
Revert last, softc is now updated.
...
I neglected to checkin the if_wivar.h update earlier, sorry.
2000-08-26 00:08:43 +00:00
a44862dea9
oops, missed this file earlier (Doh!):
...
Add support for "microwave oven robustness" with wiconfig -M.
2000-08-26 00:05:54 +00:00
0e2c6c0cc1
Access on ELINK_W3_INTERNAL_CONFIG register with 32-bit mode. Remove
...
16-bit access code. This register is 32-bit. 16-bit access with the
register causes data inconsistency (especially for CardBus cards).
2000-08-25 09:01:59 +00:00
d3afa878a2
Fix typo in SIATXRX_SPP comment.
2000-08-25 08:03:10 +00:00
3a2b5d49a6
partial backout of last commit: #if 0 references to sc->wi_mor_enabled
...
since it doesn't exist in the softc.
2000-08-25 03:11:14 +00:00
5127aa189d
In fdioctl(), allocate fd_formb dynamically when needed, rather than on
...
the stack, and remove the no-longer-necessary PHOLD()/PRELE() calls
in fdformat().
(This eliminates 1/3 of the instances of PHOLD()/PRELE() in the kernel code.)
XXX We still have too many mostly-redundant floppy drivers.
2000-08-24 20:04:28 +00:00
cf4250b7f3
Add UKBD_DEBUG.
2000-08-24 14:13:38 +00:00
thorpej