64f1d1a42f
Add missing cast of ms to (struct device *) in ms_deviopen and ms_deviclose
2000-09-27 10:31:42 +00:00
815d8f961b
Regen.
2000-09-27 02:15:30 +00:00
c3fa0043b1
Add some ATI Rage cards and some Intel chips.
2000-09-27 02:14:54 +00:00
91178eae70
Add missing '&& defined(COM_MPLOCK)'
2000-09-26 14:12:42 +00:00
44c90f4ef1
Pasto; shouldn't have bitten anyone.
2000-09-26 11:38:47 +00:00
d52ba1b85f
Fix merge lossage in disabled code.
2000-09-25 01:07:25 +00:00
5eb24d5dd0
am7990[0]_intr(): only print the "entering with isr=XX" debug message
...
if compiled with LEDEBUG > 1
2000-09-24 18:37:22 +00:00
70c8ada2ad
Add calls to ether_addmulti and ether_delmulti. This code looks a bit
...
different than other drivers due to the way ti_setmulti manages the
filters. Patch from Keijiro Ehara.
2000-09-24 14:19:52 +00:00
5fea96167f
use new generic bootverbose instead of local definition
2000-09-24 12:37:03 +00:00
9623e356f0
Recognize Acer 320U.
2000-09-24 03:22:47 +00:00
fc015f6833
Regen.
2000-09-24 03:22:26 +00:00
641ee8fd93
Add another scanner.
2000-09-24 03:21:55 +00:00
d71044b313
Don't give up so easily if the device does not respond properly.
...
Mostly from Nick Hibma (FreeBSD).
2000-09-24 02:08:38 +00:00
f2a2c14d9a
Recognize Sony memory sticks (from FreeBSD).
...
Add timing info in the debug output.
2000-09-23 21:03:00 +00:00
d9c7baa183
Add a way to do control transfers on other pipes than the default pipe.
2000-09-23 21:02:04 +00:00
6417d32d9d
Avoid "bandwidth reclamation" for control transfers. The kue device chokes
...
on it.
2000-09-23 21:00:10 +00:00
c412966bb3
Fix puctuation.
2000-09-23 20:24:47 +00:00
0fab9d10ca
Regen.
2000-09-23 18:42:05 +00:00
a5570006bc
Add some more vendors.
2000-09-23 18:39:41 +00:00
6a71867356
Add `COM_MPLOCK' option to use a device-instance-specific spinlocks
...
when running at splserial(). This is a temporary measure (until
there's a MP-safe interrupt handling structure); until then, it should
be used when MULTIPROCESSOR and IPL_SERIAL > IPL_SCHED.
2000-09-23 17:17:11 +00:00
a48f581877
Substantial overhaul, factoring out of common code, removal of redundancy
...
and general cleanup. Still not a beautiful driver, but one I'd be willing to
introduce to my parents now.
2000-09-23 15:13:02 +00:00
65c1db338c
paddr_t -> bus_addr_t in prototypes too.
2000-09-23 12:08:16 +00:00
770f6e2ae3
Add RCS Id.
...
The driver initially came from Nick Hibma (FreeBSD), which I forgpt to
mention in my initial commit.
2000-09-23 05:05:31 +00:00
23116295f4
Remove some // type comments.
2000-09-23 04:33:04 +00:00
e832785e4b
Add USB scanner driver.
...
XXX Not tested yet.
2000-09-23 04:32:23 +00:00
382141e2f7
Add a new, optional method to scsipi_adapter (scsipi_accesschk()), and use
...
it when considering whether to attach devices. This is to facilitate
`non-SCSI' RAID controller drivers that want to provide SCSI pass-through
services to the kernel.
2000-09-22 16:45:17 +00:00
d651adf44a
paddr_t -> bus_addr_t.
2000-09-22 14:46:38 +00:00
cf3c3f9410
Rename to match Ben's naming scheme.
2000-09-22 05:48:50 +00:00
4b45dfbb69
Fix a device diconnect bug found by Christian Groessler <cpg@aladdin.de>.
2000-09-22 02:34:58 +00:00
c28a7b93c0
Support for Sun Keyboard/Mouse line disciplines.
2000-09-21 23:40:47 +00:00
56cf963264
Support for SPARC machines with `su' devices.
2000-09-21 23:27:32 +00:00
ac3f296768
Guts of the Sun Keyboard/Mouse line disciplines.
...
N.B. They don't recognize L1-A yet.
2000-09-21 22:25:08 +00:00
f3ef35c447
Add rudimentary 80C04 support (basically saying "Oh look, an 80C04!").
...
Move printing the initial ":" into the board driver, like i82586.c does.
Don't bother printing the amount of RAM, as it's always 64 KB.
2000-09-21 22:20:38 +00:00
a429573227
Some more register definitions for the DP83815.
2000-09-21 04:05:43 +00:00
3ee0550572
convert tsleep()->ltsleep(), which makes the kernel complain less
...
when compiled with LOCKDEBUG.
2000-09-21 01:45:46 +00:00
014e17fbdc
Correct a few calls to VOP_CLOSE().
2000-09-21 01:37:35 +00:00
236deb1acc
Apply a patch from the driver author (originally from OpenBSD).
2000-09-20 14:33:48 +00:00
e925979f9b
Preliminary support for the National Semiconductor DP83815 10/100
...
Ethernet chip, which is based on the SiS 900 core, but with differences
in the PHY and filter programming interface, and different WoL and
802.3x flow control programming.
This chip appears on new NetGear FA-312TX cards. Thank goodness
they're finally ditching the LiteOn chips.
2000-09-20 05:44:48 +00:00
b8675d1bea
Add additional register defintions for the National Semiconductor
...
DP83815, which is based on the SiS900 core.
2000-09-20 02:08:44 +00:00
3486500f77
repair multicast filter setup. PR 11037 from Ryoji Kato.
2000-09-20 01:26:14 +00:00
24f4ce3eb0
Regen.
2000-09-20 00:46:35 +00:00
6cc3e82c48
Add National Semiconductor DP83815 10/100 Ethernet.
2000-09-20 00:46:10 +00:00
4b85232148
MI seeq8005 attribute.
2000-09-19 20:23:34 +00:00
c5d8401866
Add support for the 3c555, 556 and 556B MiniPCI cards. Based on the
...
cardbus code and the FreeBSD xl driver.
2000-09-19 01:15:06 +00:00
af02376ac9
Regen.
2000-09-19 01:11:38 +00:00
fbf3c412e4
Add IDs for the 3c555, 556 and 556B 3Com MinPCI Ethernet cards.
2000-09-19 01:10:48 +00:00
d9e2aff0df
Add explicit config values for 8 bit and offset EEPROMS, since this
...
property is now shared with the PCI frontend.
2000-09-19 01:10:12 +00:00
40aba7cd4d
Split the arm26 Ether3 (ea) driver into an MI driver for the SEEQ 8005 chip,
...
and a front-end driver for the Ether3. Only semantic change is to remove
ea_claimirq() and ea_releaseirq() on the grounds that the seem too spurious
to warrant a callback to the front-end.
2000-09-18 20:51:14 +00:00
faf55ac40c
Change tiocm_to_{com,zs}'s second argument to u_long to match with
...
the type in their caller.
2000-09-17 22:07:39 +00:00
60095a9e92
regen.
2000-09-16 11:46:17 +00:00
de4b3b44f1
delete "128MB"
...
same products number; 32MB,64MB,128MB
2000-09-16 11:45:38 +00:00
8debbc34ab
Change the second argument of tiocm_to_ucom to u_long,
...
since the second argument of ioctl is a u_long value.
2000-09-15 17:03:24 +00:00
a960881851
-make the default screentype override less invasive, call it
...
VGA_CONSOLE_SCREENTYPE because the screen types are hardware specific
and make it affect the console only (no need to change runtime
behaviour), don't call vga_setscreentype() unless necessary (to avoid
trouble with strange hardware - PR kern/11025)
-some beginnings of ISO-7 (greek) font support
2000-09-15 14:13:01 +00:00
8d027cedf8
add definitions for ISO-7 (greek) support
2000-09-15 14:09:10 +00:00
c1682ac85d
Recognize Rio 600.
2000-09-14 03:13:21 +00:00
95cbe2c829
Regen.
2000-09-14 03:11:52 +00:00
d28bd1b67f
Ad some new devices and change vendor name from SUPRA to DIAMOND2.
2000-09-14 03:11:23 +00:00
9b8c74f603
regen for trek thumbdrive
2000-09-14 00:04:15 +00:00
494592f30d
Add Trek Technology ThumbDrive (128MB)
2000-09-14 00:02:56 +00:00
dd9df6ffdf
Use correct product id for VIA VT6102 chip. Problem pointed out by
...
Jaromir Doleeek in private e-mail.
2000-09-13 16:40:15 +00:00
dcdc66f936
Regen.
2000-09-13 15:58:13 +00:00
b9bacc07be
Add product IDs for AMI MegaRAID boards.
2000-09-13 14:45:09 +00:00
d4a2e19802
Add support VIA VT6102 chip found e.g on the D-Link DFE530TX NIC.
...
Fixes PR kern/11001 by Petter Lindquist.
2000-09-13 14:00:48 +00:00
ea2fc5c0fd
Regen.
2000-09-13 13:58:25 +00:00
928a30552d
Remove incomplete (and incorrect) entry for D-Link 530.
2000-09-13 13:58:06 +00:00
e6debfdcbf
Regen.
2000-09-13 13:53:22 +00:00
a42050f3e7
Use "VT6102 (Rhine II) 10/100 Ethernet" as description to be consistent
...
with existing entry for "VT86C100A (Rhine-II) 10/100 Ethernet".
2000-09-13 13:53:06 +00:00
0c0911bb54
Regen.
2000-09-13 13:48:44 +00:00
d6cf9f28b0
Add VT6102 Rhine II 10/100BaseTX ethernet chip used on e.g. the
...
D-Link 530TX NIC.
2000-09-13 13:48:09 +00:00
8b74873d54
Cleanup the error handling code introduced in rev. 1.26. Commented by jhawk.
...
No functional change.
2000-09-13 05:17:14 +00:00
bf7a6e6857
Found glyph pixel order inverted on screen.
2000-09-13 02:11:14 +00:00
aa6df7169b
yank error.
2000-09-12 19:13:30 +00:00
c8321c45a7
Found glyph pixel order inverted on screen.
2000-09-12 09:45:48 +00:00
9466b8d07e
Define an auto variable `bn' as off_t instead of int since it is finally
...
converted to byte offset.
2000-09-12 08:03:24 +00:00
6502a2efd8
Clean-up: Remove unnecessary global reset (for debug) and change the
...
name of some variables for the consistency of naming rule.
2000-09-12 03:19:51 +00:00
32802fc83f
Be consistent: use mcpair->cond instead of mcpair->flag.
...
This also lets us clean up a bunch of cruft.
2000-09-11 02:23:14 +00:00
e8645831a5
Only reset the timer value if it actually accumlated time.
...
Otherwise it may never accumulate any time, and the recon delay
will never happen.
2000-09-11 00:22:45 +00:00
6439b28202
* rename vga_stdscreen* -> vga_25lscreen*
...
* in vga_init(), set the screen type to WSCONS_DEFAULT_TYPE, which defaults
to "80x25".
XXX: the code currently makes no attempt to ensure that a font
with the appropriate width & height is available, effectively
limiting this default to either "80x25" or "80x24" at this
time.
* make wsdisplay_screentype_pick() non static, so that vga_init() can use it
2000-09-10 11:44:13 +00:00
7381ac703b
KNF - variable declarations.
2000-09-10 10:43:53 +00:00
ed9f910cc8
Introduce WSDISPLAY_NULLSCREEN to allow low level device to detach control
...
process. Hpcmips frame buffer driver(hpcfb) call wsdisplay_switch with
WSDISPLAY_NULLSCREEN to notify user process of suspend/resume event.
2000-09-10 09:39:57 +00:00
f7d700a127
Make the control line handling a little better. Avoid a DTR/RTS issue
...
from uninitialized sc_mcr by not calling ucom_{dtr,rts} if possible.
XXX Flow control is still incomplete and needs more work.
2000-09-10 03:10:20 +00:00
59178ec7b4
Use dev/{rasops,wsfont} instead of awesome dev/rcons. Still much to do
...
before being useful.
2000-09-09 06:15:17 +00:00
48ff19c98b
u_char -> u_int for function argument and return of Zilog register
...
manipulation helper functions; no loss, no gain, for Alpha processor.
2000-09-09 06:08:42 +00:00
665eca96e0
In wsdisplay_usl_ioctl2(), use a u_long for the request to be passed off
...
to wsdisplay_internal_ioctl() instead of an int.
With this, the pcvt compat ioctl's work on an Alpha and probably other
64 bit archs.
2000-09-08 15:32:57 +00:00
237007cd69
- Set CCB_ACTIVE flag in all cases when DIAGNOSTIC is defined.
...
- Correct arguments to bus_dmamap_create().
2000-09-08 12:16:17 +00:00
6bc11dce71
In ucomopen(), make sure to call splx() before returning
...
when initialization fails.
2000-09-08 07:20:52 +00:00
3fa62c4642
Make sure we are passing a locked vp to VOP_CLOSE.
2000-09-08 01:36:35 +00:00
19f36696bc
ANSIfy last patch.
2000-09-08 01:27:12 +00:00
96d1acf3d6
Add isoc support. From FreeBSD via Berndt Josef Wulf <wulf@ping.net.au>
2000-09-08 00:55:26 +00:00
f0c15086d2
Regen.
2000-09-07 23:26:41 +00:00
36d7d0f902
s/AT&T Microelectronics/Lucent Technologies/
2000-09-07 23:26:28 +00:00
9a43fc6477
Regen.
2000-09-07 04:00:21 +00:00
006df0f4cb
Add scores of scanners (from FreeBSD).
2000-09-07 03:59:55 +00:00
08e45b3689
Cast the argument to vtophys() to vaddr_t.
2000-09-06 18:56:45 +00:00
e79103cb0a
Cast the arg to vtophys() to vaddr_t.
2000-09-06 18:48:36 +00:00
2a11ec9347
Add definition for "Actiontec 56K PCI Master", from Bill Hudspeth.
2000-09-06 15:27:37 +00:00
130aad8a7d
ANSIfy.
2000-09-06 00:17:23 +00:00
6c0346a534
Regen.
2000-09-05 22:39:59 +00:00
0b631b84eb
Add a Logitech trackball.
2000-09-05 22:39:16 +00:00
3cf4e948c1
Cast arg to vtophys() to vaddr_t.
2000-09-05 22:37:33 +00:00
4171157155
Clean-up card-type depend code.
2000-09-05 09:01:17 +00:00
6ade619f58
Regen.
2000-09-04 20:44:37 +00:00
176549d557
Add Intel 440GX host bridge.
2000-09-04 20:30:50 +00:00
fe2b627962
Fix 'RAID unsupported' printf.
2000-09-04 20:21:30 +00:00
ac5ac55b06
Add support for the AAA-131 RAID controller by treating it as a 7890.
...
Taken from rev 1.32 of the FreeBSD ahc_pci.c.
2000-09-04 19:56:04 +00:00
824ddfd20e
regen
2000-09-04 13:13:36 +00:00
4f6829605c
Brooktree Bt8474 Multichannel Synchronous Communictaions Controller (MUSYCC)
2000-09-04 13:13:14 +00:00
572e9e2f80
Move ym_mixer_set_port() (if used) during attach AFTER initialization of
...
power ctl stuff, or it makes unwanted changes to the CODEC settings.
2000-09-04 00:57:17 +00:00
5cf4edb506
Handle output packet headers in a cleaner way. From IWAMOTO Toshihiro
...
<iwamoto@sat.t.u-tokyo.ac.jp>, fixes kern/10573.
2000-09-03 19:15:45 +00:00
b2af314f55
Add a few more defines. From Nick Hibma and FreeBSD.
2000-09-03 19:09:14 +00:00
c384f772f0
remove one
2000-09-03 02:05:44 +00:00
3a2e8fdc05
Use NetBSD's pcidevs file for vendors/cards as much as possible.
...
Recognize Pinnacle Studio PCTV Rave as Miro card, tested by rh@netbsd.org .
2000-09-03 02:01:32 +00:00
cfd89531b4
don't attempt to size Host Bridge BARs. (it's a good way to die.)
...
provide a clue about 16-bit vs. 32-bit I/O BARs.
2000-09-02 00:48:20 +00:00
6a22a36219
regen for changed pcidevs
2000-09-02 00:33:25 +00:00
dae6b41d27
after discussion with veego, rename constant for 3D Labs Permedia 2 from
...
PERMEDI2 to PERMEDIA2. (substance over style. 8-) Also, fix a typo
I noticed in a comment.
2000-09-02 00:32:15 +00:00
0d01e04003
Add support for write protecting clock registers.
2000-09-01 19:04:49 +00:00
ec322f95aa
Regen.
2000-09-01 17:19:36 +00:00
6dd2f101ad
Et763 -> Bt763
2000-09-01 17:19:25 +00:00
e9bc438c50
- Simplify eisa_devinfo().
...
- New KNF.
2000-09-01 17:18:20 +00:00
641326ee44
-fix multicast filter programming
...
-support access to MII_ANER too for completeness
-remove some hacks which disappeared in FreeBSD if_rl.c
rev. 1.25 (Aug 31 14:45:49 1999)
(the driver could need more updating, but this is what I've tested
for months)
2000-09-01 15:07:23 +00:00
f729f26133
FLUSH_CACHE will not return until complete.
2000-09-01 14:17:15 +00:00
40f6cd2b96
The `cac' driver now frees CCBs on our behalf.
2000-09-01 12:23:57 +00:00
688e72faf1
Add an EISA bus front-end for the `cac' driver.
2000-09-01 12:15:20 +00:00
702747900f
- Interface cleanup. static, const in places.
...
- cac_pci_l0 has been moved to cac.c, since it's useful for EISA boards.
- Model-specific linkage now is responsible for DMA synchronization.
- If we don't recognise the board, print the subsystem ID.
- Add support for RAID LC2 and Smart Array 431.
- Start firmware background tasks on controllers that need it.
2000-09-01 12:13:08 +00:00
671d7f91ae
- Interface cleanup. static, const in places.
...
- Move convenience macros from cacreg.h to cacvar.h.
- Add one hardware check in DIAGNOSTIC case.
- Declare `cac_l0'.
2000-09-01 12:12:29 +00:00
ac2883e218
- Interface cleanup. static, const in places.
...
- Pull in linkage useful for both PCI and EISA boards from cac_pci.c.
- cac_ccb_done() now frees the done CCB if the CCB callback completes.
- Model-specific linkage is now responsible for DMA synchronization.
- Use wakeup_one() in cac_ccb_free().
- Start synchronous commands `manually'.
- Add one hardware check in DIAGNOSTIC case.
- Improve error messages.
- Start firmware background tasks on controllers that need it.
2000-09-01 12:11:37 +00:00
d8e5466776
- Move convenience macros from cacreg.h to cacvar.h.
...
- Define EISA board register set and some other magic numbers.
- Add missing elements to `struct cac_controller_info'.
2000-09-01 12:10:21 +00:00
0bc8e23c3a
even through the integrated audio on my MSI 694D Pro
...
does not set AC97_CODEC_DOES_VRA in AC97_REG_EXT_AUDIO_ID request, it
works okay; only require the bit set for revision < 'H'
2000-09-01 00:02:04 +00:00
ea9ef4ff69
Correct LED polarity bit. This bit and PHY power bit should be
...
defined in elinkxlreg.h.
2000-08-31 08:42:29 +00:00
25147761ff
Add support 3C[CX]FE575CT.
2000-08-29 08:54:50 +00:00
4739c00231
regen
2000-08-29 01:18:17 +00:00
52454a3dd6
add vendors HAUPPAUGE, ASKEY, AVERMEDIA
2000-08-29 01:17:06 +00:00
a020e8fbb5
regen
2000-08-28 17:44:33 +00:00
8b242e878a
add entry for SupraExpress 56i Sp V.90, as sent in kern/10902
2000-08-28 17:43:59 +00:00
00305bb997
provide some randomness
2000-08-28 13:25:22 +00:00
403941c60d
Regen to correct wrong keyword.
2000-08-28 10:35:59 +00:00
7591b1332b
Correct wrong keyword.
2000-08-28 10:33:58 +00:00
128fa6e8fb
Correct PCI interrput setup routine for Texas Instruments PCI113X.
...
Now PCI113X is able to handle hot insertion and deletion properly.
2000-08-28 09:26:38 +00:00
21ddff737c
Regen.
2000-08-28 09:18:09 +00:00
86063b7c73
Add 3Com 3C656 LAN + MODEM CardBus cards.
2000-08-28 08:59:49 +00:00
37c83e1340
fix some missing initializations
2000-08-27 21:43:26 +00:00
194bbc3c5d
Don't bcopy() from luserland.
2000-08-26 20:08:22 +00:00
a0f2ab32f7
Make 64-bit clean.
2000-08-26 16:02:06 +00:00
ce7a425d77
Revert last, softc is now updated.
...
I neglected to checkin the if_wivar.h update earlier, sorry.
2000-08-26 00:08:43 +00:00
a44862dea9
oops, missed this file earlier (Doh!):
...
Add support for "microwave oven robustness" with wiconfig -M.
2000-08-26 00:05:54 +00:00
0e2c6c0cc1
Access on ELINK_W3_INTERNAL_CONFIG register with 32-bit mode. Remove
...
16-bit access code. This register is 32-bit. 16-bit access with the
register causes data inconsistency (especially for CardBus cards).
2000-08-25 09:01:59 +00:00
d3afa878a2
Fix typo in SIATXRX_SPP comment.
2000-08-25 08:03:10 +00:00
3a2b5d49a6
partial backout of last commit: #if 0 references to sc->wi_mor_enabled
...
since it doesn't exist in the softc.
2000-08-25 03:11:14 +00:00
5127aa189d
In fdioctl(), allocate fd_formb dynamically when needed, rather than on
...
the stack, and remove the no-longer-necessary PHOLD()/PRELE() calls
in fdformat().
(This eliminates 1/3 of the instances of PHOLD()/PRELE() in the kernel code.)
XXX We still have too many mostly-redundant floppy drivers.
2000-08-24 20:04:28 +00:00
cf4250b7f3
Add UKBD_DEBUG.
2000-08-24 14:13:38 +00:00
fa9cfe5e39
Removed unnecessary variable declaration.
2000-08-24 14:12:34 +00:00
d08216d4e2
Add a quirk for audio devices that claim to have an extension unit, but it
...
can't be manipulated.
2000-08-24 14:11:09 +00:00
6cbde58ee4
Add flag defines for 3CCFE575BT and 3CCCFE575CT (CardBus cards).
2000-08-24 08:54:31 +00:00
9386fe0821
Sync to 1.98 of pcmciadevs
2000-08-24 07:12:20 +00:00
cbacec4196
Sort BAY into numerical order.
2000-08-24 07:10:36 +00:00
5056d0ce7c
Add support for "microwave oven robustness" with wiconfig -M.
2000-08-23 19:01:04 +00:00
12cd7ada9a
Common framebuffer functions.
...
(currently includes a special cased fb_isconsole() for sun4u).
2000-08-23 13:41:15 +00:00
a50a11e47f
Add fb_setsize_pfour() prototype.
2000-08-23 12:02:47 +00:00
17e5f7b17c
Declare drivers moved here from arch/sparc.
2000-08-22 21:31:16 +00:00
e02ba8698f
Declare drivers moved here from arch/sparc/dev.
2000-08-22 21:30:27 +00:00
d29f2ce630
Get tcxreg.h from the correct location.
2000-08-22 21:18:57 +00:00
40903bf7d3
Split off `pfour' code from sparc/dev/fb.c into a separate file.
...
This file will be pulled in by framebuffer drivers that define the `pfour'
attribute.
2000-08-22 21:18:14 +00:00
ce1bf05583
update description
2000-08-22 11:42:14 +00:00
d12156f1bf
#include <compat/netbsd32/netbsd32.h> if necessary
2000-08-22 07:36:04 +00:00
efb0ce0996
Recognize Promise ATA-100 controller as PDC-20262 instead of 20246.
2000-08-21 15:52:50 +00:00
84ebb6165e
Match the Promise ATA-100 controller found on the mother board
...
MS-6321 (MSI 694D Pro). Reported in PR#10756 by Kazuki Sakamoto.
2000-08-21 15:43:46 +00:00
b84a81b268
Regen.
2000-08-21 15:33:45 +00:00
7012027317
Add a product id for the promise ata-100 controller found on
...
MS-6321 (694D Pro). Reported in the PR#10756 by Kazuki Sakamoto.
2000-08-21 15:28:17 +00:00
7951ece147
Use splsched() instead of splhigh(), and explain why in a comment,
...
as well as document a pitfall of the approach being used.
2000-08-21 14:25:14 +00:00
53204cdb36
Regen.
2000-08-21 14:11:45 +00:00
360142a622
- Add vendor and product codes for Compaq array controllers.
...
- Pull in entries from OpenBSD that we don't already have.
2000-08-21 14:11:07 +00:00
35c0f133ec
Regen.
2000-08-21 09:13:02 +00:00
500edf585d
Add several Texas Instrument's PCI-CardBus bridges.
2000-08-21 08:58:51 +00:00
2d8994210a
Add a bunch of macros of the form PCI_<regname>_CODE similar to
...
existing PCI_ID_CODE to create the PCI appropriate register from
parameters.
Avoid use of 'class' in macro -- it's a C++ reserved keyword.
2000-08-21 05:17:33 +00:00
0c05c0b9f2
Add register definitions for S.M.A.R.T. -- an autonomous disk monitoring
...
standard.
2000-08-21 03:53:55 +00:00
b3b158b922
Implement handling of the UQ_SPUR_BUT_UP quirk. Some keyboards sometimes
...
generate a key up quickly followed by a key down for the same key, so we
take care of that.
(Finally I can type again without going nuts. :)
2000-08-20 22:30:17 +00:00
124d256269
Move these SBus drivers here from arch/sparc.
2000-08-20 22:27:07 +00:00
d9426e06b6
Install usbdevs.h as well.
2000-08-20 22:25:20 +00:00
f83d14e14b
Move declaration up, before it is used.
2000-08-20 20:01:45 +00:00
5a308cf392
Split & move cgthree sbus attachment from arch/sparc.
2000-08-20 19:59:46 +00:00
124ea6d974
<machine/fbio.h> -> <dev/sun/fbio.h>
2000-08-20 19:58:53 +00:00
e8ed83e13f
Split & move cgthree from arch/sparc.
2000-08-20 19:58:19 +00:00
a6b7f5a17d
Use RF_WAIT_COND() to avoid locking errors.
2000-08-20 16:51:03 +00:00
d06cb9ab29
RF_COND_WAIT(): use ltsleep().
...
RF_SIGNAL_COND(): use wakeup_one().
2000-08-20 16:15:31 +00:00
7857ad0b81
Move cgsix and bwtwo Sbus attach code here from arch/sparc.
2000-08-20 14:33:25 +00:00
1eeffbaac6
De-P__
2000-08-20 14:30:13 +00:00
6e36f80602
Move cgsix, bwtwo and BT DAC support here from arch/sparc.
2000-08-20 14:28:49 +00:00
02c262b278
Move fbio.h and fbvar.h here.
2000-08-20 14:00:43 +00:00
7becceeb4b
Add COMPAT_NETBSD32 support.
2000-08-20 13:44:14 +00:00
b369b979ae
Remove duplicate `flags' from printf format string.
2000-08-20 11:51:52 +00:00
49742b54fa
Remove a bogus VOP_UNLOCK.
2000-08-19 18:20:07 +00:00
3a17c9470d
Don't try to initialize a component label on a failed component.
2000-08-19 18:07:36 +00:00
0c448da29b
When breaking up a transfer in vndstrategy(), only inherit B_READ and
...
B_ASYNC from the original buffer's flags.
2000-08-19 10:44:02 +00:00
8f5586c98f
Avoid calling tsleep when running above splhigh()
2000-08-18 13:22:39 +00:00
9c77b69be0
Add upc
2000-08-18 12:54:32 +00:00
6b569d798f
fix typo in comment
2000-08-18 05:55:31 +00:00
8c3116e66a
Copy wi_{dst,src}_addr from struct wi_frame into faked-up ether_header
...
instead of addr1 and addr2. THis means that tcpdump -e will show the
correct MAC address for communications with access points instead of showing
the BSSID.
In the future there should be 802.11 support for bpf/libpcap/tcpdump,
but that is aways down the road.
Also fix a typo in a comment.
2000-08-18 04:11:48 +00:00
2af3c25d9d
Regen.
2000-08-17 23:28:00 +00:00
7e5bb38ef2
Add an XXX comment.
2000-08-17 23:18:56 +00:00
2d8b50667e
From FreeBSD: add code for Insystem USB cable.
2000-08-17 23:16:16 +00:00
44c15e95b5
Add two keys to the raw mapping for German keyboards.
...
From Matthias Kretschmer <McCratch@gmx.net>, fixes PR 10850.
2000-08-17 23:08:07 +00:00
e1d18090ac
add vendor/product information for Rainbow i-Key 2000
2000-08-17 15:17:00 +00:00
d7eebd9227
Basic driver for CHIPS 82C710 Universal Peripheral Controller and friends,
...
as used on later arm26 system (A5000, A4, A3010, A3020, A4000).
What we have got:
...
upc0 at iobus0 base 0x010000: config state bb 87 1c 00 00
fdc at upc0 offset 0x3f4 not configured
wdc0 at upc0 offset 0x1f0
lpt0 at upc0 offset 0x278
com0 at upc0 offset 0x3f8: ns8250 or ns16450, no fifo
...
What we haven't got:
- FDC support (found, but not configured).
- Clearing lpt interrupts on arm26 systems (needs help from IOEB).
- A upc(4) manual page.
- More than minimal testing (my A3020s don't have root devices).
- A proper probe routine (arm26 can't use one anyway).
2000-08-16 23:56:08 +00:00
b0c9fcd14a
Add a NOPREVENT quirk which prevents the sending of PREVENT messages (some
...
manual 9track tapes don't support it). Add a quirk entry for the NCR H621
9track tape drive.
2000-08-16 19:22:25 +00:00
4f5e77ca58
Change _res field in ispstatusreq_t to be req_response for FC.
...
Add some more FC specific response defines and split the response
defines into common, SCSI only and FC only cases.
2000-08-16 18:11:38 +00:00
d9162135d4
Add some changes/notes suggested by eeh@netbsd.org (zero header of
...
response queue entry). Clean up some of the Fibre Channel completion
stuff so that thing we check actually match the current manual. There's
only one silly lossage that the manual doesn't cover at present- if
an FC command completes with SV (sense valid), the f/w does *not* s
et "GOT_STATUS" in the state bits- I guess they assume that you'd figure
out that if you have SENSE DATA you probably have a CHECK CONDITION. Still-
yet another fine f/w frotz from Qlogic. Add in an ISP_EXEC_THROTTLE
define to set a per-device execution throttle.
2000-08-16 18:10:21 +00:00
f80d70f19a
Just add the mmap argument to vga_common_attach(), don't bother
...
with vga_extended_attach().
2000-08-14 20:14:50 +00:00
6b97132ee9
Account for changes to how the SROM is read made some time
...
ago to the PCI and CardBus front-ends. Sigh, DE425, the
bastard child, no one pays enough attention...
2000-08-14 14:26:03 +00:00
7f6e2386a6
Make sure to reset length of data (len) and offset of mbuf (mlen) when
...
CRC is splitted into two mbufs in receiving. This fixes panic or hangup
in arc4_encrypt() when WEP is enabled on awi.
2000-08-14 11:28:03 +00:00
ec701021fd
Add a maintenance note. Fix QFREE and QAVAIL macros to match change in usage.
2000-08-14 07:12:15 +00:00
ed05406b77
Add a maintenance note
2000-08-14 07:11:14 +00:00
b1c18a6bc7
Add a maintenance note. Move the single bit tags of islocked and
...
onintstack to be real integers. Add ISP_ILOCK/ISP_IUNLOCK macros.
Fix the isp_lock/isp_unlock inlines to stop being so embarrassingly
in error. Why, or why, can't I have mutex_enter/mutex_exit, pretty please?
2000-08-14 07:10:09 +00:00
22ef6ec857
Add a maintenance note. Change all splbio's to use the ISP_LOCK/ISP_UNLOCK
...
or ISP_ILOCK/ISP_IUNLOCK macros.
2000-08-14 07:08:12 +00:00
8801250c70
Add a maintenance note. Add a cast to u_int16_t which will keep
...
Solaris lint && the SUNPro SC5.0 complier happy.
2000-08-14 07:06:50 +00:00
d7ee06672f
Add a maintenance note.
...
Clarify some startup SCSI mode settings. Insist that the FC f/w options
*must* have ICBOPT_PDBCHANGE_AE set (wasted a half day on this crock).
Make a specific comment in isp_start that the tags being selected for FC
cards, in lieu of any set by the outer layers, are there for safety's sake.
This removes the change from a previous commit.
For the ISP_TOGGLE_TMODE function, do a complete reset, not just an
isp_init (info from Solaris port). Make some cleanup changes for
code clarity.
2000-08-14 07:05:28 +00:00
d8aef491c1
Add a maintenance note. Add a bus specific isp_sbus_intr function- this is
...
so we, ahem, note we're on an interrupt stack so we don't try and sleep
on any mailbox commands we might want to run.
2000-08-14 07:00:08 +00:00
18e2c3aaad
Add a maintenance note. Minor change in some logic in the DMA mapping.
2000-08-14 06:58:45 +00:00
324576262d
Fix typo in comment for WI_RID_AUTH_TYPE
2000-08-14 00:44:22 +00:00
cd1db4529e
describe more precisely when the keyboard freeze happens
2000-08-13 22:30:19 +00:00
ed274219d5
Fix race condition when unlinking xfers. Thanks to IWAMOTO Toshihiro
...
<iwamoto@sat.t.u-tokyo.ac.jp> for analyzing the problem and suggesting a fix.
Fixes PR 10662.
2000-08-13 18:20:14 +00:00
4f325f2674
Implement what in Intel-speech is known as "bandwidth reclamation".
...
It means that we continously poll USB devices that have a pending transfer
instead of polling just once every ms. This speeds up some transfers
at the expense of using more PCI bandwidth.
2000-08-13 16:18:09 +00:00
927f61818e
Add "SYMBIOS" processor type to the SDEV_NOLUN category. These are usually
...
the GEM chips on a Sun D1000- and they cause Qlogic SBus firmware to blow
chunks if you access past lun 0.
2000-08-13 00:03:01 +00:00
8cfcd021bd
Take away some, add some.
2000-08-12 23:26:10 +00:00
0390dd7f3e
Fix spelling in comment.
2000-08-12 22:24:26 +00:00
be1aad52d8
Regen.
2000-08-12 14:58:20 +00:00
807228a4d8
Make attach message correct for non-umass devices.
...
Handle RBC (a SCSI subset).
2000-08-12 14:52:44 +00:00
3fff1255ea
Add some more vendors and devices.
2000-08-12 14:51:01 +00:00
124bec855a
Minor whitespace change.
2000-08-12 14:35:20 +00:00
23830f1e6c
- Check CR_RST rather than ISR_TXRCMP and ISR_RXRCMP in sip_reset()
...
- Add more delay after reset
- "Big endian mode" on SiS 900 seems broken so don't enable it;
use htole32()/le32toh() instead
- Don't cast u_int16_t array to u_int8_t pointer
- Add some delay() to FILTER_EMIT macro in sip_set_filter()
Now SiS 900 works on my macppc.
2000-08-12 07:38:40 +00:00
c9dc8413bb
Make our policy WRT tagged queueing consistent and sane: ordered tags for sync writes, simple tags for all else. Should make ahc and adv a bit more reliable (metadata writes won't get reordered incorrectly...) and isp a bit more performant (it was using ordered tags all the time).
2000-08-11 21:31:19 +00:00
8cb7deb85b
Add support for the DEC DE422 Ethernet, which is a DEPCA
...
attached to the EISA bus. This board is commonly found
on Alpha Jensen systems.
2000-08-11 02:27:07 +00:00
d561771013
Add missing copyright noticed (it ended up in eisareg.h by mistake).
2000-08-11 00:46:17 +00:00
5310aa68b8
Oops, back out previous. It wasn't intended.
2000-08-11 00:44:37 +00:00
e207174eb0
Add functions to read EISA configuration data for MEM, IRQ, DMA, and IO.
...
XXX Just error stubs on the i386 right now -- someone needs to write
XXX EISA BIOS code for i386.
2000-08-11 00:43:18 +00:00
30f7d691a0
Declare the ECU data in an MI location, so that drivers can
...
use it.
2000-08-10 23:30:08 +00:00
19fd9da968
Define SIOC[SG]IFGENERIC in <sys/sockio.h>, as FreeBSD and OpenBSD do.
2000-08-10 11:48:41 +00:00
363910c22b
s/Toshiba America Info Systems/Toshiba/ since they are the main PCI issuer.
...
Add new version of the Oboe FIR device.
2000-08-10 01:55:57 +00:00
a1b037bc3a
recognize the i440MX mobile chipset's IDE interface
2000-08-09 13:23:07 +00:00
389bf995b5
%b -> bitmask_snprintf()
2000-08-09 01:56:33 +00:00
0dc8c1fb35
Remove ispcmd_slow routine- SCBUSACCEL routine will set/clear tag/wide/sync.
...
Make some changes about where some things sit in the softc.
2000-08-08 22:58:30 +00:00
9766fcf2be
Don't attempt to actually read SAF-TE temperature objects- nobody seems
...
to be obeying the original spec as to what the numeric value means.
Temperature flags are unaffected- these are still the 'pseudo-thermometers'
and overtemp/undertemp warnings will be caught and translated to SES objects
here.
2000-08-08 22:55:30 +00:00
295864adef
During probe, use SCBUSACCEL ioctl to adapters that support it to
...
enable fast/wide/tagged.
2000-08-08 22:46:03 +00:00
4f33d5a8ab
Register definitions for the C&T 82C710, 82C711 and 82C721, as used in
...
the Acorn A5000, A4, A4000, A3010 and A3020.
2000-08-08 22:14:53 +00:00
91537bce4a
sizeof(fmtstring) + 8 wasn't enough for the string; that won't cope with the
...
printed version. Make a little more room for the bitmask_snprintf() call.
2000-08-08 19:59:41 +00:00
2b3a50d3de
%b -> bitmask_snprintf()
...
Because this code is shared, add a macro for bitmask_snprintf() that
should expand to the equivalent snprintf() on non-NetBSD systems. This is
only used in ?HCI_DEBUG cases anyway.
2000-08-08 19:51:46 +00:00
87ab5c42c5
%b -> bitmask_snprintf()
2000-08-08 19:42:40 +00:00
aaa5c58d70
Update arc map routine prototype to compile again.
2000-08-08 02:11:05 +00:00
78fa2d7e41
fix interrupt priority botch
2000-08-07 17:34:41 +00:00
aac52686f0
Manually edit the headers to show which version of pcidevs this was
...
generated from.
XXX - this really should be automated
2000-08-07 08:27:11 +00:00
7ba2890ab8
Added PCI IDs for 3Com's Home Connect (3c450) and Office Connect (3cSOHO100).
...
They both are register compat with later versions of the 3c905 (tornado/
vortex) series.
2000-08-07 04:08:35 +00:00
b103a8ca48
Label the buffer size as such on probe. 128 KB makes sense, but 4608 does not.
2000-08-06 00:19:04 +00:00
8d37a29277
Regen.
2000-08-04 14:32:05 +00:00
fc2908cf8a
Vortex Computer Systems changes, from OpenBSD:
...
- Add product ID for GDT6518RS.
- Fix bogus product IDs.
2000-08-04 14:31:40 +00:00
daff45a51a
Regen.
2000-08-04 11:57:59 +00:00
c54b0fde7a
Add ATEN serial adapter.
2000-08-04 11:57:34 +00:00
ef86d29308
Add one more delay() to sip_read_eeprom().
2000-08-04 09:30:56 +00:00
8464bde7e8
If the SET_FEATURE for piomode is rejected, fallback to mode 0 instead of
...
reporting an error.
This fixes the "piomode error (0x4)" problem with some ATAPI ZIP drives
reported on port-i386.
2000-08-03 23:14:31 +00:00
fb20241fda
When performing pci_config_dump:
...
- Display the full value of 64-bit BARs.
- Avoid displaying the upper 32 bits of 64-bit BARs as a separate 32-bit BAR.
2000-08-03 19:58:55 +00:00
1b00421876
Add quirk entry for NEDICOM CRD-BP2, from kern/10738.
2000-08-03 12:36:08 +00:00
a8421d4787
Some W83781 have ID 0x11 instead of 0x10; handle these too.
...
Restore printing sdata for each sensors if DEBUG.
2000-08-03 09:27:01 +00:00
b6dd28b4ce
Support some differences in the Macronix 98715AEC-C and E chips from the other
...
98715* series.
The MX98715AEC-[C,E] use a different location in the serial eerom for
LED control, and programming it with the original location's values
caused unpredictable behavior.
Also, start integrating fixes where media changes on an adapter
under load may fail. There's more work to be done here, but I need
to sort out our internal changes a little more carefully.
2000-08-03 03:07:30 +00:00
cb4d63d57c
More compilation breakage in the non-DEBUG case
...
(from Castor Fu <castor@geocast.com>)
2000-08-03 03:00:04 +00:00
e97c2066ab
Add options DDB_BREAK_CHAR. This overrides break on the serial console
...
break character with the supplied one. This is useful for cases where
break is hard to generate, or you are connected to a PC that "sends"
breaks when power cycled. For this mode in com, interpret break char
in the polling section, which allows entry into the debugger before
the tty is opened. Only supported in the com driver currently.
2000-08-03 00:30:47 +00:00
de378db998
W83781D: Explicitely reselect bank0 before using "value RAM" registers.
...
Hopefully this will make the W83781D works.
Also use common functions to set up fan & temp info[] & sensors[] for
the W83781D.
2000-08-02 22:20:41 +00:00
e445e43ddc
Add support for the W83697HF - basically a W83627HF with only 2 temp sensors.
2000-08-02 21:50:37 +00:00
46c3f0204d
PCIIDE_CMD0646U_UDMA->PCIIDE_CMD0646U_ENABLEUDMA for consistency with
...
PCIIDE_AMD756_ENABLEDMA
defopt PCIIDE_CMD0646U_ENABLEUDMA, PCIIDE_AMD756_ENABLEDMA,
PCIIDE_CMD064x_DISABLE
Fix a typo pointed out by John Hawkinson
2000-08-02 21:49:09 +00:00
bd0766459c
Add support for the CMD PCI646U. Linux claims that this driver is brocken
...
with UDMA, so enable Ultra-DMA only if "options PCIIDE_CMD0646U_UDMA" is set.
2000-08-02 20:23:45 +00:00
1ae072f471
Fix bonehead bug for compiles w/o DEBUG set
...
(thanks to KANETA Shin'ichi <kaneta@cr.chiba-u.ac.jp>)
2000-08-02 17:39:50 +00:00
068c76fc80
Core version 2.0 (platform version 1.0) rewrite of ISP driver. Some
...
interace cleanups, some new common functions. The major impact that
will be noticeable right away is that if you boot with not Fibre connected
to the FC cards, you no longer hang indefinitely.
2000-08-01 23:55:09 +00:00
76c77aca38
Add support for the CMD PCI0646U2, an Ultra/33 version of the 0646.
...
Note: there's also a PCI0646U, for which I don't have docs for now.
2000-08-01 21:02:55 +00:00
02e3c1ef40
Use bus_space_read/write_multi_stream_2 for FIFO instead of bsr/w_multi_2.
2000-07-31 22:48:49 +00:00
f21a75dee3
XIDEBUG_CONFIG -> XID_CONFIG. From R.Massar@Fh-Worms.DE
2000-07-31 21:49:47 +00:00
067f5e9814
Previous would have misbehaved if polled commands overlapped.
2000-07-31 13:16:34 +00:00
35913a898c
Sync internal state and ifmedia state. Addresses PR#10424.
2000-07-31 03:25:11 +00:00
3628f3e00c
Make sure that we do not call bus_space_*_multi_* with zero count.
2000-07-31 02:14:47 +00:00
100a4a6b22
Add support for the W83781D and W83782D hardware monitors.
2000-07-30 22:23:53 +00:00
e6dde2bd42
Add MII support to smc91cxx driver. This is supported for the 91c100
...
and 91c100FD (FEAST) controllers. Existing controllers should continue
to work as they have. Added the card's memory to the probe message.
2000-07-30 21:34:47 +00:00
538126d75a
swap lm_match() and wb_match(), as wb_match() is more restrictive.
...
Otherwise a winbond can be mis-probed as a lm if it has the rigth device ID.
Problem reported by Bernd Ernesti.
2000-07-30 17:22:26 +00:00
b5e3ec56a8
Remove src/sys/dev/apm/*. (They've gone to arch/hpcmips/dev/apm.)
2000-07-30 04:41:15 +00:00
d569dc2fb5
Whitespace fix (space rather than tab after #ifdef)
2000-07-29 17:49:08 +00:00
cbd3022e31
Make this compile without PUCCN defined.
2000-07-29 17:43:38 +00:00
b2bf026f39
Guard the console code in puc.c with the defopt PUCCN so we can
...
use the puc driver without having the com drivers.
2000-07-28 20:43:45 +00:00
457d8d7c7e
print parent device name too, so we know which socket a card was probed at
...
and whether pcmcia or cardbus
2000-07-28 19:17:02 +00:00
081f57c846
Handle booting without a serial expander box connected.
2000-07-28 06:10:54 +00:00
10debdeb9c
Fix to autonegotiation problem with some fxp cards. Fix found and reported
...
by Erich T. Enke et al. on current-users. This fixes PR 10550.
2000-07-27 22:14:48 +00:00
e955a714ba
Add support for the W83627HF: lm7x like, but with more sensors, and more
...
registers.
2000-07-27 21:49:22 +00:00
ca5b9b0c22
Force 64bit arithmetic for timeout computation; a 32bit int opverflows for
...
large timeouts. Should fix PR kern/10575.
2000-07-27 21:28:17 +00:00
a7d2293ea4
My 16 port boca seems to fail to update the interrupt bit in it's interrupt
...
register for a port under high load. The effect is that the port is wedged
waiting for an interrupt that will never come.
Add a callout-based watchdog which periodically (hz/10) scan trough the ports
for missed interrupts.
Problem also noted by Chris Jones, and this fix also helped him.
2000-07-27 20:08:47 +00:00
0154cbce36
Ops, forgot this one: Add interrupt disable bit #define for HPT370
2000-07-27 15:26:16 +00:00
aa0d4a41d5
HPT370: clear disable interrupt bit; make it works in Ultra/66 mode.
2000-07-27 14:28:45 +00:00
acb96154d0
More intelligent BI vector assignment.
2000-07-26 12:41:40 +00:00
34604a9f79
No point in forcing SECDAY to be a long int.
2000-07-26 11:07:45 +00:00
188122248a
I've confirmed that Samsung MagicLAN SWL-2000N (PRISM-II) works
...
with WEP enabled.
2000-07-26 07:28:56 +00:00
cc8e6675e2
add Samsung MagicLAN SWL-2000N
2000-07-26 07:24:15 +00:00
fa8ff381d8
Add code to allow the PCI com serial ports to be used as the system
...
console. This is not enabled by default, and is turned on with
options PUCCN. Done by castor@netbsd.org .
2000-07-25 23:18:42 +00:00
969b4bc568
Define the todr(9) interface.
2000-07-25 22:38:14 +00:00
4ba0c6b55c
New time-of-day clock chip drivers. These implement the todr(9) interface.
2000-07-25 22:33:02 +00:00
27d41a1de3
Map txrate for prism2, where each bit is apparently assigned to the
...
corresponding rate; 1Mbps, 2Mbps, 5.5Mbps, 11Mbps.
2000-07-25 12:04:29 +00:00
5463f7b316
Improve the model identification and match. Addresses PR-10485.
2000-07-24 21:50:10 +00:00
b023fdd2b7
Regen.
2000-07-24 21:47:40 +00:00
0f37cacaf1
Add entries for all Xircom ethernet models.
2000-07-24 21:45:00 +00:00
10afc4e0a8
create a funcion, siop_busreset(), to reset the scsibus.
...
Reset the scsi bus at attach time, to be sure all devices start in narrow/async
mode.
Defer sync/wide negotiation until after whe have a valid
xs->sc_link->device_softc, so that we can honnor the NOSYNC/NOWIDE quirks.
2000-07-24 15:15:00 +00:00
197f977187
Pass the level and vector to vme_intr_map() in the correct order.
2000-07-24 15:00:41 +00:00
74cf7af4a9
Increase polled command timeout to 2s.
2000-07-24 12:28:31 +00:00
f9f72ecf9a
Purge C++-style comments.
2000-07-24 04:28:51 +00:00
a119131555
Be a little more explicit and careful about setting links in TDs and QHs.
2000-07-23 19:43:37 +00:00
5f7778cd1e
* Add entries for older Yamaha YMF chips (724, 740) plus the
...
newer steppings (740C, 724F) which use the same microcode as the
DS-1S/DS-1E.
Regen.
2000-07-23 00:18:24 +00:00
2169753fc5
* Add entries for older Yamaha YMF chips (724, 740) plus the
...
newer steppings (740C, 724F) which use the same microcode as the
DS-1S/DS-1E
2000-07-23 00:14:15 +00:00
19bd1749ad
Add short device descriptions in comment lines.
2000-07-22 21:25:52 +00:00
8be010f00d
- Big endianness cleanup:
...
a) use stream methods when transferring data via the MEMPORT into/out of
the chips buffer memory
b) use htole16/le16toh when interpreting 16bit values in the chips memory
Both where NOPs on i386 machines, which is why this worked before on the
test machine(s), but would break when on a big-endian machine.
2000-07-21 13:54:38 +00:00
afa5b645c2
add support for SIOCS80211NWKEY and SIOCG80211NWKEY.
2000-07-21 04:48:55 +00:00
c9355a957c
Add the pccard controller for a Toshiba Portege drive. No vendor ID, no
...
product ID, and in this temporary loan, no bleeding power supply so it
can only probe the controller and not the drive. Still, its something.
2000-07-20 23:20:01 +00:00
a1b8e79bb1
Take advantage of generic soft interrupts, if available.
2000-07-20 20:44:50 +00:00
b60bcd873d
Regen.
2000-07-20 14:47:35 +00:00
d3b42c18e4
Add what is apparently ESS's old vendor ID and corresponding product ID for
...
the Maestro 1.
2000-07-20 14:46:51 +00:00
6e88d58524
Make it compile when PCIIDE_AMD756_ENABLEDMA is defined. From kern/10555
...
by MURATA Shuuichirou.
2000-07-20 12:19:41 +00:00
83f94dc417
Regen.
2000-07-20 07:11:28 +00:00
4af0fbdb1a
Add PMAG-JA framebuffer.
2000-07-20 06:38:39 +00:00
0d5d0bd93a
don't define LIST_FOREACH, it's in sys/queue.h now.
2000-07-20 03:47:56 +00:00
c47c527343
add some more CTIO flags
2000-07-19 22:19:23 +00:00
0615788781
zero result queue entry when done if debugging.
...
don't do an isp_notify_ack if we're not at run state.
2000-07-19 22:19:00 +00:00
93379fb341
fix mislabelled error case
2000-07-19 22:18:02 +00:00
f9e6c9cf42
Fixx off-by-one error in handlereset().
2000-07-19 16:07:00 +00:00
554019cd4b
More printf format munging for off_t: when printing as %lld, cast to long long.
2000-07-19 13:44:24 +00:00
00cafd0569
Add MIDI support. From Tatoku Ogaito.
2000-07-19 09:58:45 +00:00
0ab524f389
moved the check priviledge for SIOCS80211NWID from each driver to ifioctl().
...
it also fixes the problem that non-priviledged user can change nwid
for wi and ray drivers.
2000-07-19 06:00:39 +00:00
7d1b0e5b39
Use device_lookup() and ditch TAILQ sillyness.
2000-07-18 15:27:44 +00:00
47f692248f
add WEP support also for PRISM2 cards.
...
Corega works fine with WEP, but farallon doesn't work well with WEP for now..
2000-07-18 15:01:55 +00:00
905b4e497f
Add support for Corega Wireless LAN PCC-11, and Farallon SkyLINE 11Mb.
...
Note that Corega card works at 3.3V only, then it requires cardbus code
for now.
2000-07-18 14:53:26 +00:00
4a2a3bf091
Add Farallon SkyLINE 11mb card as Intersil Prism2
...
vendor:product of the card is Lucent:WaveLAN, and CIS string shows
"INTERSIL" "HFA384x/IEEE"...
2000-07-18 14:48:10 +00:00
c41ca10d33
add "#define PCI_INTERRUPT_PIN_MAX 0x04"
2000-07-18 10:59:04 +00:00
693ff4c94d
PAGE_SIZE -> IOASIC_DMA_BLOCKSIZE in one last place. From Izumi Tsutsui.
2000-07-18 06:14:05 +00:00
b91d520dc9
Back out previous. It is no longer needed, as both the Alpha
...
and DECstation IOASIC drivers clear the appropriate interrupts
in the dispatch routine.
2000-07-18 06:12:33 +00:00
5446d3c92e
Don't make assumptions of the actual value of PCI_PMCSR_STATE_D0.
...
Problem noted by John Hawkinson.
2000-07-17 18:12:00 +00:00
cfae3184d8
Don't clobber bits from 2 to 31 when trying to change the power state.
...
Problem noted by John Hawkinson.
2000-07-17 17:53:44 +00:00
5e275d7012
Clear the DMA pointer reload interrupt bits in the IOASIC_INTR
...
register to prevent interrups from looping on the Alpha.
From Izumi Tsutsui <tsutsui@ceres.dti.ne.jp>.
2000-07-17 17:43:16 +00:00
3aacf9101a
Regen.
2000-07-17 13:07:21 +00:00
82b491eecc
Some more products (from FreeBSD).
2000-07-17 13:06:54 +00:00
8746b7c870
- Write the registers 7930 registers properly on the Alpha (it's
...
different than on the DECstation).
- Use IOASIC_DMA_BLOCKSIZE instead of PAGE_SIZE.
Should make this work on the Alpha. From discussion with
Izumi Tsutsui, Gregory McGarry, and Chris Demetriou, and
much reading of EK-D3SYS-PM.
2000-07-17 04:37:27 +00:00
887bebaa71
Define IOASIC_DMA_BLOCKSIZE (4096 bytes).
2000-07-17 02:18:17 +00:00
8623daff6d
G/c some unused (and incorrect, for our usage) definitions.
2000-07-17 02:17:13 +00:00
95f72dd4aa
Use the IOASIC_DMA_ADDR() macro now that it is fixed.
2000-07-17 01:29:02 +00:00
cd6fa19644
Make sure to get the upper 5 bits of the page address mixed in
...
in IOASIC_DMA_ADDR(), as the le_ioasic attachment does. Noted
by Gregory McGarry.
2000-07-17 01:28:16 +00:00
114bb7f9d9
If card is in power state D3 put it into power state D0 so that it will
...
at least work after the next reboot.
2000-07-16 20:18:48 +00:00
859057e6b3
Fix uninitialized variable (reg) in fxp_pci_confreg_restore();
...
this could result in garbage being written to the PCI status register,
which is unlikely to have had a serious effect. This was with us from
an #if 0 added in rev 1.6.
2000-07-15 21:36:19 +00:00
9feae259a4
Avoid printing duplicate colon when card is waked up.
2000-07-15 20:57:24 +00:00
cfe61a3025
Un-__P'ify kernel prototypes.
2000-07-15 19:59:27 +00:00
54ccff0437
define "80x24" screen types for better vt100 compatibility
2000-07-15 18:47:54 +00:00
20305c6623
Fix a typo in the `device_lookup()' changes.
2000-07-15 18:12:42 +00:00
61c607b9fe
Improve kernel message when card is in power state D3. Instead of...
...
epic0 at pci0 dev 11 function 0 epic0: unable to wake up from ...
... print this:
epic0 at pci0 dev 11 function 0: unable to wake up from power state D3
2000-07-15 10:32:36 +00:00
abs