c529c40718
Normalize the copyright notice on this file.
1998-08-15 20:42:25 +00:00
129cbf95ee
Minor edit.
1998-08-15 05:16:41 +00:00
df9baf2311
Assign copyrights to TNF.
1998-08-15 03:51:30 +00:00
d5df55112a
vm_offset_t -> {paddr_t,vaddr_t}, vm_size_t -> vsize_t
1998-08-14 16:50:00 +00:00
97e83f6e0b
Change the "vm_offset_t"s to "u_long"s for now; eventually, we can make
...
them vaddr_t and paddr_t, as appropriate (after scouring the RPB docs
to know which are phys and virt addresses).
1998-08-14 16:46:09 +00:00
a2dd74ed79
Merge paddr_t changes into the main branch.
1998-08-13 02:10:37 +00:00
f3dd6e430b
Pull in files.mii
1998-08-11 18:52:52 +00:00
cf231bf251
Adapt to MII changes.
1998-08-11 00:28:53 +00:00
dabc8eb436
Implement the 'i' flag which makes the bootloader ask for the file to
...
load (as in OSF/1).
Useful for netboot where "-file" doesn't work as needed.
1998-08-07 10:38:37 +00:00
e8564df3b9
implemt a simple "beep" device to access the ISA speaker
1998-08-07 10:26:38 +00:00
546365a27e
_POSIX_SOURCE -> _POSIX_C_SOURCE
1998-08-06 11:25:04 +00:00
9186d2da5c
Simple instrumentation of pmap_steal_memory().
1998-08-04 22:40:17 +00:00
bf8f319d0e
Remove some lint.
1998-08-01 21:12:32 +00:00
8eeb95fce4
Implement pci_intr_disestablish().
1998-08-01 20:25:12 +00:00
92fa3a68ad
In sio_intr_disestablish, also make sure that IRQs 0, 1, 8, and 13
...
default to edge-triggered, just like in the setup.
1998-08-01 19:38:29 +00:00
0b60fda7c8
Implement sio_intr_disestablish(), and ensure that an initially-enabled
...
interrupt is never disabled and an initially-level-triggered interrupt
never becomes untyped.
1998-08-01 18:54:21 +00:00
528dab6808
Implement alpha_shared_intr_disestablish(). Simply removes the handler
...
fromthe list, allowing the caller to manipulate the sharing type,
if appropriate.
1998-08-01 18:52:36 +00:00
a24dbc8065
(Always) (practice) (safe) (macro expansion).
1998-07-31 15:07:41 +00:00
9589268364
Add unused zskbd and zsms entries, and ISA PnP entry.
1998-07-31 04:38:51 +00:00
e2ce6c8a28
Machine-dependent ISA PnP goo for NetBSD/alpha.
1998-07-31 04:38:04 +00:00
f948e430bb
Provide a hook for bypassing space accounting, needed to support ISA PnP
...
for now.
1998-07-31 04:37:02 +00:00
eb32016a95
Split up using BWX for PCI config and bus access. Default to using BWX for
...
the former, but not the latter. Hopefully, this will address some problems
people have been experiencing w/ some devices on Pyxis systems when BWX
is used for bus access. (If it's not used for PCI config access, we can
get fatal machine checks while probing behind PCI-PCI bridges!!)
1998-07-29 01:28:44 +00:00
3ff8e6493a
Don't cast the null residual pointer passed to vn_rdwr().
1998-07-28 18:34:52 +00:00
e8063e5201
Don't cast the null residual pointer passed to vn_rdwr().
1998-07-28 18:30:54 +00:00
88a83f13de
Back out previous.
1998-07-27 18:27:08 +00:00
6ebd8cf4e3
Comment out cs device. Kernels don't compile because there is no
...
cfattach structure found. Leave it to the author to untangle.
1998-07-27 18:02:02 +00:00
da2e61d160
Delint.
1998-07-27 13:55:32 +00:00
b0b64545e8
Add cs* at isa? port 0x300, wildcard IRQ and memory address, to pull
...
them from the EEPROM. Wildcard DRQ to force memory-mode operation; this
value is not available in the EEPROM and must be configured manually.
1998-07-27 01:57:56 +00:00
2385ee5eca
Provide PMAP_{,UN}MAP_POOLPAGE().
1998-07-24 20:32:07 +00:00
6054d626f9
Switching dev/ic/lpt.c to use spllpt() instead of spltty(). It doesn't use
...
tty structures, and on some machines (namely the DraCo internal lpt, and some
multi-i/o boards for Amigas and DraCos), tying spltty to the pretty high printer
interupt level would hurt serial performance.
On all affected ports but Amiga, spllpt() has been defined in machine/intr.h
to be spltty(), thus preserving old behaviour. Portmasters are encouraged to
change is, if they feel something else is better (e.g., one of its own were
possible).
1998-07-18 21:27:25 +00:00
2fc1260cc0
Implement bus_dmamap_load_uio().
1998-07-17 21:09:59 +00:00
d58ad29b6c
Kill the old extern mchkinfo pointer and prototype cpu_mchkinfo().
...
This file has been collecting prototypes and other things used in the MD
code...that's bad...because this is exported to the MI kernel.
1998-07-13 19:10:14 +00:00
48257ecec1
Define cpu_mchkinfo() to locate the mchkinfo struct. This is used to fix
...
the recent bug where Multias around the world have been aborting back to
SRM with no message at all as they tried to attach a TGA or VGA console,
because the old mchkinfo pointer wasn't allocated prior to use.
And contrary to widespread rumour, this bug has nothing to do with my
LCA IDE mod...that worked just fine. "Not guilty."
1998-07-13 19:07:33 +00:00
0d7c1dede9
Use the new cpu_mchkinfo().
1998-07-13 18:49:34 +00:00
c9e3235f35
1. Don't deref zero on early machine checks.
...
2. Revert last week's non-KNF {} editing.
1998-07-13 00:14:52 +00:00
93ecc95d92
Fix printing of real mem. I'm going to, for right now, leave it to
...
someone else to figure out the best machine independent fashion of
fixing ptoa to handle > 32 bits.
1998-07-09 00:46:17 +00:00
bca69afed6
Place the software PG_EXEC PTE bit into the protection array, instead
...
of OR'ing it in manually.
1998-07-08 17:30:45 +00:00
6b092524ea
stale beer- place structure in right file
1998-07-08 17:20:42 +00:00
a8d2213784
Define a macro that returns the mask of PALcode PTE bits that we care
...
about when determining if a TBI is necessary (i.e. the PALcode bits minus
the FOx bits, since we always track those).
1998-07-08 17:19:46 +00:00
0792d7f3db
Define a shorthand macro that represents the mask of PTE bits that the
...
PALcode cares about.
1998-07-08 16:48:49 +00:00
3f776dfbe2
Cosmetic change.
1998-07-08 16:46:51 +00:00
434b3fe82b
tentative better fix for allocating the correct number of mchkinfo structs
1998-07-08 16:28:25 +00:00
ff376fbd03
Doh! Jason caught me being really stupid. There isn't necessarily
...
a linear 0..N mapping out of alpha_cpu_whami - which is what I was
using to index the new cpu machine check array. This is a quick hack
back to just using the first element while I think of a kinder function
that will do the function (per-platform) of whami->VIRTUAL CPU ID, which
if you think about it, is really necessary anyway.
1998-07-08 05:25:40 +00:00
1ea93eea1c
Define one page free list, and put all pages on it.
1998-07-08 04:35:23 +00:00
638f0aab7c
Clarify comment about what nodes are being 'found' and noted for later
...
use by an error handler:
* There can be only one TurboLaser, and we'll overload it
* with a bitmap of found turbo laser nodes. Note that
* these are just the actual hard TL node IDS that we
* discover here, not the virtual IDs that get assigned
* to CPUs. During TLSB specific error handling we
* only need to know which actual TLSB slots have boards
* in them (irrespective of how many CPUs they have).
1998-07-08 01:03:41 +00:00
a5e7f763c2
minor tweak, and example of how to do error insertion
1998-07-08 00:58:09 +00:00
73c269fe20
attempt to catch some stuff for ev5 module info
1998-07-08 00:56:39 +00:00
9f1070514c
First (prelim placeholder) pass at machine check handler for tlsb
1998-07-08 00:49:06 +00:00
adf058f0f7
There can only be one TurboLaser node, and now we'll overload
...
into the integer tlsb_found a bit map of found nodes and export
it to the rest of the kernel. This is so that at machine check
time when we're doing some TLSB/KFTXX error handling we don't
have to attempt a badaddr to look at all TLSB nodes (which will
just be too sad to try...).
1998-07-08 00:47:53 +00:00
de4f340241
add some error handling specific definitions
1998-07-08 00:45:52 +00:00
84076832df
add some more offset definitions
1998-07-08 00:45:08 +00:00
6f87cdce00
Start of the platform specific (RAWHIDE) machine check handler. This
...
is not really needed for this platform, except that we might want to
handle PCI errors which get reported through here. In any case, this
prints out more info than is usual. Will probably need to detune
this to be based upon DIAGNOSTIC defines.
1998-07-08 00:44:32 +00:00
57190a7be7
use new mchkinfo structures for expect/recv storage
1998-07-08 00:42:14 +00:00
9035e8b3eb
Move the search for number of cpus up earlier because we need to know
...
how many cpus there are when we (now) valloc per-cpu machine check
structures.
1998-07-08 00:41:32 +00:00
275fb86f8d
add some error handling definitions
1998-07-08 00:40:18 +00:00
35ffe8edb3
Add machine check type definitions. Structure the expected/received
...
machine check items.
1998-07-08 00:39:02 +00:00
dfe345a444
common logout structure definitions, or a start thereof
1998-07-08 00:36:18 +00:00
9c326571d3
add a common logout printing routine file
1998-07-08 00:34:49 +00:00
163f4f10b1
add common logout printing routine file
1998-07-08 00:34:27 +00:00
de83dce0de
On second thought, call that like the rest of the shared intr functions.
1998-07-07 22:24:38 +00:00
c7f8d02b23
Always count the number of strays we encounter, but don't send a "stopped
...
logging" message if we're ignoring strays.
1998-07-07 22:06:29 +00:00
1ddd528346
Fix typi.
1998-07-07 22:02:57 +00:00
e82fc7d3cd
The Pyxis core logic in the 164SX and 164LX seems to have problems with
...
stray interrupts. Do what Digital UNIX (formerly DEC OSF/1) does; just
ignore strays.
1998-07-07 21:49:47 +00:00
ca73507d0b
The Pyxis core logic in the Miata seems to have problems with stray interrupts.
...
Do what Digital UNIX (formerly DEC OSF/1) does; just ignore strays.
1998-07-07 21:47:49 +00:00
be83de18fd
Use ALPHA_SHARED_INTR_DISABLE() to test if a shared interrupt should
...
be disabled after a stray.
1998-07-07 21:44:57 +00:00
443d238f70
Define a macro to test if a shared interrupt should be disabled after
...
a stray has occurred.
1998-07-07 21:37:11 +00:00
dbd55159a2
Teach dec_axppci_33_init() a little about the nsio config registers,
...
enable the nsio IDE, and leave the config register ISA ports mapped.
1998-07-07 08:49:12 +00:00
b37021c1a1
defopt NATM.
1998-07-05 22:48:05 +00:00
011f2bda08
defopt NS, NSIP.
1998-07-05 06:49:00 +00:00
5c0c5dd0b4
defopt ISO TPIP.
1998-07-05 04:37:35 +00:00
8db0fcdbf7
defopt CCITT.
1998-07-05 02:12:22 +00:00
3751946b97
defopt INET, NETATALK.
1998-07-05 00:51:04 +00:00
466e784ee1
defopt DDB.
1998-07-04 22:18:13 +00:00
8978015d51
Mark the kernel pmap `active' in pmap_bootstrap().
1998-07-03 05:22:10 +00:00
efee8aedfa
If GENERIC has SCSIVERBOSE on, having it off here makes no sense
1998-07-02 23:36:59 +00:00
7897fc307b
Add support for:
...
DEC_1000
DEC_1000A
DEC_ALPHABOOK1
DEC_EB66
Remove support (ran out of space) for: ahc and bha. SCSI must be ncr or isp.
This will be fixed soon by defining an optional, two-floppy install
alternative.
1998-07-01 09:14:02 +00:00
9a04d7d9f2
adapt to wscons interface change
1998-06-30 09:02:08 +00:00
02b767eee5
Take a stab at EB66 support. An EB66 is basically an EB64+ with a
...
21066 LCA instead of a 21064 + APECS.
1998-06-27 10:10:51 +00:00
dff0b84aba
Oops, forgot option header.
1998-06-27 08:59:03 +00:00
50604bf85b
Kill off some EVCNT_COUNTERS calls, since [A] it has to be rewritten anyway
...
before it can be useful, and [B] #ifdefs do not belong at every call site,
a common API should be defined and the implementations conditionalized, not
the calls. Duhh.
Also, remove the initial XXX mystery_icu debugging code.
1998-06-26 21:59:46 +00:00
e5e9adb326
Note ST_DEC_1000 as PCI/EISA.
1998-06-26 21:55:38 +00:00
e31a396c68
Add AlphaServer 1000 interrupts.
1998-06-26 21:55:09 +00:00
843dd2d279
Add DEC_1000 support for new Mikasa[/Pinnacle] platform.
...
INSTALL-FLOPPY will have to wait; it needs attention w.r.t. size.
1998-06-26 21:53:10 +00:00
0ce5563488
Turn on ST_DEC_1000, but reuse the 1000a init and console routines.
1998-06-26 21:49:25 +00:00
a0f70c580c
New platforms: Mikasa and Mikasa/Pinnacle, aka Pinkasa.
...
Like the 1000A, the AlphaServer 1000 has a daughtercard assembly that
integrates the CPU and core logic, so these can be ev4/apecs or ev5/cia.
New systype, and, sigh, another way of doing interrupts and another
mystery icu.
Kill off some EVCNT_COUNTERS calls, since [A] it has to be rewritten anyway
before it can be useful, and [B] #ifdefs do not belong at every call site,
a common API should be defined and the implementations conditionalized, not
all the calls. Duhh.
1998-06-26 21:45:56 +00:00
0131c651bd
Add DEC_1000A, per GENERIC.
1998-06-26 05:43:21 +00:00
78d7f07efd
Very preliminary support for the Tadpole/DEC AlphaBook. These are basically
...
AXPpci33 machines + power management and a Cirrus PCI-PCMCIA controller.
There is currently no support for the power management facilities, and
the PCI-PCMCIA controller driver needs some work, but this should boot
and run from disk.
1998-06-26 05:42:34 +00:00
bd8d501f7e
remove options FIFO; it's now the default
1998-06-26 01:53:43 +00:00
ac57178fc0
defopt COMPAT_OSF1
1998-06-26 00:00:41 +00:00
971b8956ef
defopt KTRACE
1998-06-25 21:18:11 +00:00
de27f1befc
Don't bother reading the ELF string table out of a stripped /netbsd[.gz].
...
In this case, all it has in it are the never-referenced printable names
for the ELF sections themselves. It's located at the end of the (ramdisk)
netbsd.gz file, so it is a very expensive seek and read for only 85 bytes.
Boot floppy load time:
before: 5 minutes
now: 3 minutes
1998-06-25 06:45:46 +00:00
63e87b1a8e
New platforms: Noritake, Pintake, and Corelle. Sometimes these are ev4/apecs,
...
sometimes they are ev5/cia.
1998-06-24 01:38:59 +00:00
6c1e8f5b20
Use the new LOCATE_PCS() macro.
1998-06-24 01:33:19 +00:00
49d5ae18ba
Call pci_1000a_pickintr() like on other platforms, but for 1000a expand
...
the iot, memt, and pc in the call so that pci_1000a_pickintr() (and the
other routines in that module) do not need to be aware of the core logic
type just to pass down memory and I/O space tags or to call the decompose
function.
1998-06-24 01:32:06 +00:00
92aafa4a46
Identify ST_DEC_1000A as PCI/EISA.
...
New macros:
LOCATE_PCS(struct rpb *hwrpb, int cpu_number)
PCS_PROC_MAJORTYPE(struct pcs *)
PCS_PROC_MINORTYPE(struct pcs *)
Define LOCATE_PCS() to map (hwrpb, cpu_number) -> Per-Cpu-Slot structure.
Replace the PCS_PROC_{MAJOR,MINOR}{,SHIFT} stuff with macros that simply
return the major and minor cpu type codes.
1998-06-24 01:20:43 +00:00
f1cc92f606
Add dec_1000a interrupts.
1998-06-24 01:14:55 +00:00
731f8f0abd
Add DEC_1000A platform.
1998-06-24 01:12:45 +00:00
ebc133a0ec
Clean up code using new LOCATE_PCS() macro.
1998-06-24 01:11:09 +00:00
7f61979398
Use new LOCATE_PCS() macro.
1998-06-24 01:10:35 +00:00
b314521ce9
Replace expression with new LOCATE_PCS() macro.
1998-06-24 01:09:45 +00:00
c705adbc8a
New systype for DEC_1000A: Noritake, Pintake, and Corelle.
1998-06-24 01:08:28 +00:00
ee709bc9e1
Replace expressions with the new macros: LOCATE_PCS(), PCS_CPU_MAJORTYPE(),
...
and PCS_CPU_MINORTYPE().
1998-06-24 01:06:26 +00:00
d273e10d2d
Protect against multiple inclusion.
1998-06-24 01:04:26 +00:00
e2ebc10c2d
Duuuh! Align the SGMAP page tables to 32K, not 32M.
1998-06-23 02:31:05 +00:00
6c7fabb232
adapt to wscons interface change
1998-06-21 09:51:59 +00:00
1fbd0b3749
GC the unused `physadr' type, which was not able to hold a complete physical
...
address on 2 architectures anyhow. Also, move the definition of the `label_t'
type inside _KERNEL protection, since it is specific to the in-kernel
setjmp()/longjmp() implementations.
1998-06-14 20:09:22 +00:00
651b44e211
Rework the way kernel include files are installed. In the new method,
...
as with user-land programs, include files are installed by each directory
in the tree that has includes to install. (This allows more flexibility
as to what gets installed, makes 'partial installs' easier, and gives us
more options as to which machines' includes get installed at any given
time.) The old SYS_INCLUDES={symlinks,copies} behaviours are _both_
still supported, though at least one bug in the 'symlinks' case is
fixed by this change. Include files can't be build before installation,
so directories that have includes as targets (e.g. dev/pci) have to move
those targets into a different Makefile.
1998-06-12 23:22:30 +00:00
b6ac862e01
Roll back to 1.55 level since 1.56 will not compile.
1998-06-12 21:14:43 +00:00
dfeb8f794c
Delete a debugging clause that is no longer necessary, and also can't
...
work properly if we're testing for a pmap active on _other_ processors.
1998-06-12 07:28:07 +00:00
0a47d0d577
Rename active_pmap() to PMAP_ISACTIVE().
1998-06-12 00:45:47 +00:00
ff16cd85c0
In pmap_enter(): if old PTE was not valid, we don't need to sync
...
the I-stream, for the same reason we don't need to invalidate the TLB.
1998-06-11 10:36:08 +00:00
2683c2826d
Track mappings entered w/ VM_PROT_EXECUTE, and only synchronize the
...
I-stream when changing PTE bits or removing mappings that were entered
w/ EXECUTE protection.
1998-06-11 10:30:14 +00:00
c0c2cb0f9a
Garbage-collect the old PMAPSTATS stuff; it didn't compile, and should
...
just be redone from scratch. Get it out of the way now to make it easier
to restructure a few things.
1998-06-11 05:16:35 +00:00
3af0f95d24
Define a macro to test PG_EXEC.
1998-06-11 05:10:41 +00:00
55207ad8b4
Define a software PTE bit to track VM_PROT_EXEC.
1998-06-11 05:09:47 +00:00
afc9b7c59b
Significantly reduce the number of I-stream synchronizations by really
...
decoupling this operation from TLB invalidations (e.g. pull I-stream
syncs out of loops, executing them only once, etc.).
1998-06-11 05:08:37 +00:00
817b595bab
Separate syncing the I-stream from invalidating the translation buffer.
1998-06-11 02:45:21 +00:00
1abd24fffe
Correct a comment.
1998-06-11 00:34:16 +00:00
02182100df
Use config_defer().
1998-06-09 18:49:33 +00:00
69717a7f0e
Fix a UVM #if so {} balance is preserved and ctags(1) doesn't lose.
1998-06-09 09:31:58 +00:00
680a3d77f4
Add isa_dma{freeze,thaw}(), used to temporarily stop and then restart
...
all ISA DMA. Needed by e.g. the SmartCard reader for Sharks.
1998-06-09 01:04:17 +00:00
53394a1d41
Change the ISA DMA API to take an isa_chipset_tag_t rather than
...
a struct device * corresponding to the ISA bus device. The ISA DMA
controller driver functions have been renamed and now take a struct
isa_dma_state *, and are called indirectly by machine-dependent code
which provides the DMA state.
These changes allow e.g. `ofisa' (the OpenFirmware configuration
mechanism for the ISA bus, used by e.g. Sharks) to use the MI ISA
DMA controller code.
1998-06-09 00:06:54 +00:00
8dedb90f13
The ISA chipset must persist; it's required after autoconfig time.
1998-06-08 23:49:05 +00:00
f5cd6a7736
Add debugging support to the bus_space macros. If BUS_SPACE_DEBUG (or DEBUG)
...
is defined, the bus_space macros will check to ensure that the bus address
and the target buffer (if applicable) are aligned properly for the size
of the type being used. If they are not, a message will be displayed on
the console.
Strict alignment is required by the Alpha architecture, and a trap will
occur of unaligned access is performed. These changes will aid debugging
of broken device drivers.
1998-06-08 03:42:19 +00:00
aedc717c00
Hopefully avoid breaking PCMCIA on alpha.
1998-06-07 19:11:29 +00:00
2e9939699d
Kernel configuration for my Multia, an example of how to configure a
...
Multia w/ PCMCIA support.
1998-06-07 00:45:35 +00:00
14df007174
Oops, don't forget to fill in *addrp.
1998-06-07 00:29:29 +00:00
0890af5ca8
Only disable an interrupt line after MAXSTRAYs if there is no handler
...
attached; we get stray interrupts on PCI devices sometimes, for some
unknown reason. (Similar problem exists on the 164SX, which also has
a Pyxis.)
1998-06-06 23:29:23 +00:00
331a7f56c1
Remove some debugging code no longer relevant now that we have DMA
...
window chaining.
1998-06-06 23:11:52 +00:00
eabad6b572
Implement bus_space_{alloc,free}() for swiz PCI I/O space.
1998-06-06 22:44:46 +00:00
7a6d646c9b
Implement bus_space_{alloc,free}() for BWX bus space.
1998-06-06 22:28:16 +00:00
fe17c44d6c
Add support for software powerdown of the Digital Personal Workstation.
1998-06-06 20:53:41 +00:00
04ba8480ae
Use REGVAL64() to frob the Pyxis interrupt mask register.
1998-06-06 20:42:36 +00:00
098dd211c7
Define a REGVAL64() for some Pyxis registers.
1998-06-06 20:40:14 +00:00
49aea111fb
If the platform specified a powerdown hook, and howto has RB_POWERDOWN,
...
call the hook. If the hook fails, print a warning, and just halt (RB_HALT
is implied by RB_POWERDOWN).
1998-06-06 20:39:04 +00:00
1733ad8dc5
Clean up a little, and add a `powerdown' hook in the platform structure.
1998-06-06 20:18:50 +00:00
d08070a693
Add a comment describing the locking needs of the alpha_sgmap.
1998-06-06 20:12:28 +00:00
85d08836f1
- Don't call *_dma_init() twice; there's no need to. Just do it in *attach().
...
- Display Pyxis revision properly.
1998-06-06 01:33:44 +00:00
c0fa3c6ac4
Don't call *_dma_init() twice; there's no need to. Just do it in *attach().
1998-06-06 01:33:23 +00:00
59d76407b4
Display information about which sgmap we're attempting to initialize
...
if we die in alpha_sgmap_init().
1998-06-06 01:31:46 +00:00
9331237596
Oops, turn off some debugging printfs.
1998-06-05 21:47:14 +00:00
bf8523f4e4
- Egads! There are Pyxis "Pass 1" chips that do not have the DMA bug!
...
Use the check recommended by the Digital Workstation engineers; look
for Miata 1 systems (i.e. with Intel SIO). From Andrew Gallatin.
- Update copyright (Pyxis and BWX).
1998-06-05 19:25:19 +00:00
f251e3372d
Don't attempt to map the PCI IDE interrupt at bus 0 device 11 on the
...
AlphaPC 164 and AlphaPC 164LX - these are wired to compatibility mode.
1998-06-05 19:15:41 +00:00
1aa688234e
Miata 1 has an Intel SIO at bus 0 device 7 and a CMD PCI IDE at bus 0
...
device 4. Miata 1.5 and Miata 2 have a Cypress at device 7 and PCI IDE
at functions 1 and 2 of the Cypress (like the PC164SX). These on-board
PCI IDE controllers are wired to compatibility mode, so don't bother
trying to map the interrupt.
1998-06-05 19:04:51 +00:00
a1c151d56b
Add system variation for Miata 1.5.
1998-06-05 18:18:37 +00:00
c072110af0
Actually, I did use a few of them on this file (I wasn't clear enough
...
in my mail to Ross, I guess...)
1998-06-05 17:42:53 +00:00
bb362059ac
On Pass 1 Pyxis, disable PCI Read Prefetching, and warn the user about
...
the DMA bug that exists on this Pyxis revision.
1998-06-05 17:24:11 +00:00
29977868a7
What was called CNFG in ALCOR and ALCOR2 is actually called PYXIS_CTRL1
...
in Pyxis. Add a comment to this fact.
1998-06-05 17:22:34 +00:00
73e5032ac9
Define the Pyxis-specific bits in the CIA_CSR_REV register (ID mask, and
...
the ID for the 21174).
1998-06-05 17:16:31 +00:00
2701ea3ef3
Add DEC_550 (Miata).
1998-06-05 17:03:07 +00:00
5790ee09ee
Revert...Jason didn't use Andrew's diffs.
1998-06-05 15:28:40 +00:00
8f455480ef
Tweak the copyrights a little bit. pci_550.h gets a TNF copyright, not
...
CMU, and pci_550.c keeps TNF but gets "Andrew Gallatin and Jason R. Thorpe".
1998-06-05 03:34:27 +00:00
cf914cac00
oops, read CNFG on all Pyxis revs.
1998-06-05 02:15:38 +00:00
cbaedc8675
Support for the Digital Personal Workstation [456]xx, a.k.a. Miata (systype
...
DEC_550). Mostly cloned from the EB164 systype, with some modifications
from myself, and a few more from Andrew Gellatin.
1998-06-05 02:13:41 +00:00
3cfb38c5d1
Define the Pyxis interrupt request register.
1998-06-05 00:53:02 +00:00
3249813e11
For whatever reason, the firmware seems to enable PCI loopback mode if it
...
also enables BWX. Make sure it's enabled if we have an old, buggy firmware
rev.
1998-06-04 22:58:33 +00:00
d4d49905dd
Add support for using BWX for PCI config space and PCI i/o and mem space
...
on the ALCOR2 and Pyxis. BWX is enabled iff:
- It hasn't been disabled by the user (patch `cia_use_bwx' or build cia.o
with the option "CIA_USE_BWX=0"),
- it's enabled in CIA_CSR_CNFG,
- we are running on an EV5-family processor,
- BWX is in the processor's capabilities mask.
1998-06-04 21:34:45 +00:00
616125f8d1
Deal with a hardware bug in Pass 1 and Pass 2 Pyxis chips. Basically,
...
the scatter/gather TLB cannot be invalidated on these chips. So, to
work around this, we configure the otherwise unsed DMA Window 2 as a
2M SGMAP window at 128M, point all of its page table entries at the
DMA spill page, and, when the TLB is to be invalidated, put the PCI bus
into loopback mode, and create a target hit on Window 2 every 64k for
the number of TLB entries (plus a few ... it seems to not work unless
we read a few extra times), forcing out old TLB entries to make room for
the new, dummy target hits.
1998-06-04 18:11:23 +00:00
a51d42503c
Export the spill page PTE, and provide a hook to initialize it early.
1998-06-04 01:22:52 +00:00
6dc28f5445
CIA and Pyxis have 8 scatter/gather TLB entries.
1998-06-04 01:18:22 +00:00
32fef69ef7
Define the CIA control register.
1998-06-04 01:04:11 +00:00
d94f02f9fd
Ok, now we _REALLY_ have Pyxis recognition correct. There are two systypes
...
that can have Pyxis: EB164 (AlphaPC164LX and AlphaPC164SX) and DEC_550 (Miata),
and these systypes/variations _always_ have Pyxis.
1998-06-03 23:16:55 +00:00
44605ba506
Define a bunch more system variations.
1998-06-03 23:07:38 +00:00
15c52040a5
Define the ALT_MEM big in the CIA revision register.
1998-06-03 22:19:08 +00:00
9f5797ac1d
turn on Essential HIPPI for these configurations
1998-06-03 21:16:28 +00:00
d6041754c2
Allow the DMA tag to specify a boundary contraint. If the device has a
...
more strict boundary, the map will use it, otherwise the map will inherit
the tag's, unless the tag's constraint is 0 (no boundary constraint).
1998-06-03 18:25:53 +00:00
50be447da3
Sync the bus_dmamap_load back-end functions between alpha and i386. (only
...
slight, unnecessary differences)
1998-06-03 04:15:05 +00:00
7022024d4a
Add epic* at pci?
1998-06-02 01:43:33 +00:00
a7f360c6c9
Specify a non-profiling C rule.
1998-05-31 23:25:41 +00:00
5d6bc16daa
more optimizations
1998-05-29 15:55:34 +00:00
164da176e8
Add boundary checks to _bus_dma_load...
1998-05-29 15:25:07 +00:00
0c05b92da1
pull in new PC display headers
1998-05-28 16:59:31 +00:00
c59c1eae2a
Define ioasic device offsets in terms of standard ioasic "slot" offsets.
1998-05-27 00:18:13 +00:00
1ef3ca572e
- Additional rearrangement for the sake of running on the DECstation some
...
day.
- Convert to use bus_dma.
- Fix cleaning up unaligned start address.
- Correctly determine if the device supports Fast SCSI, and adjust the
minimum sync period accordingly.
- Compute minimum sync period correctly on the 25MHz devices.
- Use GPI2 to determine if we're a 25MHz or 40MHz device.
- Currectly determine SCSI ID and "fast mode enabled" for the built-in
TCDS on DEC 3000 models, using cached information from the PROM environment.
1998-05-26 23:43:05 +00:00
ab087002d1
Make this into a proper attachment (i.e. use asc_tcds) and clean up
...
the namespace accordingly.
1998-05-26 23:37:44 +00:00
3aa84f9e26
- Make this into a proper attachment (i.e. use asc_tcds) and clean up
...
the namespace accordingly.
- Set FCLK in the CFG3 register if we have a > 25MHz clock.
- Indicate that we support Fast mode to the back-end if we're told we're
fast by the TCDS layer.
- Correctly compute the minimum sync period.
1998-05-26 23:37:27 +00:00
3ce836df8d
Make the TCDS attachment of the ASC driver a proper attachment (i.e.
...
attach it with asc_tcds).
1998-05-26 23:34:23 +00:00
2d384ae1a1
GPI2 in the CIR register indicates our clock speed: 1 = 25MHz, 0 = 40MHz.
1998-05-26 22:48:01 +00:00
a97fc2f180
If any of _ANSI_SOURCE, _POSIX_C_SOURCE or _XOPEN_SOURCE are defined, don't
...
provide any identifiers other than sig_atomic_t.
1998-05-25 20:59:01 +00:00
e569598438
On DEC 3000s, ask the prom for the SCSI ID and "fast mode enabled" of
...
the built-in TCDS, while we can still access the prom.
1998-05-25 05:16:42 +00:00
085b73d2db
Add "SCSIID" and "SCSIFAST" environment variables present on the
...
DEC 3000 systems.
1998-05-25 04:01:10 +00:00
57c68363d6
Add support for reading the SCSI ID and "fast mode enabled" from the
...
PMAZB-AA and PMAZC-AA EEPROM.
1998-05-25 01:14:38 +00:00
3b9e9634fb
- Change the tcds child locator from "slot" to "chip", making it look less
...
like a TurboChannel locator, and more like what is actually going on.
- Allow tcds and asc children of tcds to be cloned.
1998-05-24 23:45:29 +00:00
d3ead78027
Several changes to the TurboChannel Dual SCSI driver:
...
- Fix the autoconfiguration model; the TCDS children don't attach to
TurboChannel, so don't make it look like they do.
- Make the driver use bus_space (not bus_dma yet; soon)
- Recognize the PMAZ-FS (baseboard fast SCSI on DEC 3000s) and the
PMAZB-AA (TCDS option card) and PMAZC-AA (TCDS fast SCSI option card).
- Rearrange it a bit, so that it can eventually be made into an "MI"
TurboChannel driver (i.e. work on DECstations).
1998-05-24 23:41:42 +00:00
a3073631d7
Rebury an old mach-vm-quirk warning, for mach vm kernels.
1998-05-24 22:15:19 +00:00
1ce82f8f84
Fix previous to kill gcc warning in non-DEBUG compile.
1998-05-24 20:59:49 +00:00
66e7b8998f
Only disable stray interrupts if there is no interrupt handler attached
1998-05-24 19:09:57 +00:00
a54568bc38
Add PCMCIA hooks (taken from files.i386)
1998-05-23 22:42:14 +00:00
02ae2c98b3
In pmap_pv_enter() untangle the allocated pv (now "newpv") and the DEBUG
...
loop temporary so DEBUG kernels don't trap on startup.
1998-05-23 22:23:09 +00:00
30e2441b99
Prototype sio_intr_alloc().
1998-05-23 21:36:33 +00:00
9c2e213217
Add sio_intr_alloc (copied from i386's isa_intr_alloc) for PCMCIA.
1998-05-23 18:35:56 +00:00
11e1975af7
Add isa_intr_alloc macro (for PCMCIA).
1998-05-23 18:35:03 +00:00
3dfd62c76f
cs_heldchar is gone.
1998-05-23 00:51:10 +00:00
0cb3acc9ae
Correct a small, but fatal, typo.
1998-05-21 23:38:04 +00:00
93d96b3415
Add LOCKDEBUG (commented out).
1998-05-20 18:09:16 +00:00
a2f214a443
Add fine-grained locking, using a locking protocol modeled after the i386
...
UVM pmap's locking protocol, written by Chuck Cranor. Not all of the
support for multiple processors is here yet, but the kernel does run
under moderate loads with LOCKDEBUG (all locking operations are no-ops
unless LOCKDEBUG is turned on).
This is by no means complete... there are still some possible snares
to take a look at.
1998-05-20 04:05:50 +00:00
6626878e7b
It is no longer necessary for pmap_pinit() and pmap_release() to be
...
pmap interface functions, as NetBSD no longer uses statically allocated
pmaps (except for the kernel pmap, which is special-cased anyhow).
1998-05-19 19:00:11 +00:00
ca819f2940
Argh, finish renaming Lev1map to kernel_lev1map.
1998-05-19 18:35:11 +00:00
eaf145ad5e
Make function naming consistent, and teach pmap_pv_dump() about page
...
usage types.
1998-05-19 05:21:34 +00:00
dc13176aec
No need to keep global pointers to the initial kernel level 2 and level 3
...
page tables. Also, rename Lev1map to kernel_lev1map.
1998-05-19 02:57:01 +00:00
804e5be6f7
Nuke `register'.
1998-05-19 02:43:48 +00:00
293854e385
Put pmap_initialized in the BSS segment.
1998-05-19 02:42:41 +00:00
ca12fa7ebe
Make PT page reference counting more generic so it can be used for other
...
special use page types.
1998-05-19 02:04:28 +00:00
8fdc16212f
The Alpha architecture has a variable page size; don't hardwire the
...
number of PV entries per page at compile time.
1998-05-19 00:42:16 +00:00
b44dc2ecbf
Make the page attribute manifest constant names have similar form to
...
page usage manifest constant names.
1998-05-19 00:29:03 +00:00
180f140a85
Keep track of page usage inside the pmap (pvent, l{1,2,3}pt page, "normal").
1998-05-19 00:20:21 +00:00
ba482f242f
Fix lc0 (lemac) line(s) so that the de20[345]s will work again. Add depca
...
for de20[012]s (tested and works on a pc164sx).
1998-05-14 21:53:40 +00:00
95bdb660ed
Simple screen attribute handling for wscons.
...
The graphics device driver passes a "default attribute" for normal text
output to the wscons framework. If the emulation module needs more
attributes (for different "renditions") it can allocate them via a
callback.
For now, only the "sun" emulation makes use of it.
1998-05-14 20:49:55 +00:00
d19fbe1196
Garbage-collect the old confargs stuff that was used in the Early Days.
...
It isn't really appropriate anymore. Replace it with a real mainbus
attach args structure.
1998-05-14 00:01:30 +00:00
6a49b0a33e
Clean up some historical artifacts.
1998-05-13 23:38:26 +00:00
748d204949
Cleanup TurboLaser autoconfiguration somewhat.
1998-05-13 23:23:23 +00:00
b24eb75496
Clean up a buglet.
1998-05-13 23:22:08 +00:00
ca9600b324
Implement and use gbussubmatch().
1998-05-13 22:13:35 +00:00
326f8183dc
No need to hard-code the mcclock offset on the gbus; gbus is direct-config.
1998-05-13 22:03:07 +00:00
fb9726fe91
Add a few files related to the Digital Personal Workstation.
1998-05-13 21:59:32 +00:00
49aa171ab9
Add support for chaining DMA windows together, for falling back on
...
SGMAPs if a direct-mapped window fails.
1998-05-13 21:21:16 +00:00
b012e4e39b
Normalize gbus configuration somewhat, and add support for configuring
...
the Zilog DUARTs.
1998-05-13 02:50:29 +00:00
6172f5a0ac
Use flags instead of a bunch of booleans. Add a "use bwx" flag.
1998-05-12 19:07:21 +00:00
0b64ea0879
Gah, typo.
1998-05-12 18:45:04 +00:00
86ee1b1000
Oops, and the writes, too.
1998-05-12 18:44:32 +00:00
cc45d00d3c
Clean up the code that puts the PCI controller into config mode 1; no
...
functional difference.
1998-05-12 18:40:44 +00:00
34bbe5cd80
Rework ALCOR/ALCOR2/Pyxis recognition Yet Again. (Actually, just the
...
way it's displayed, and mask off the revision once we've determined
which chip we're talking to.)
1998-05-11 23:56:16 +00:00
0624060713
Rework PCI interrupt mapping on the EB164 systype. Rather than computing
...
interrupt routing directly, use the interrupt routing information provided
in the PCI "line" register. The previous scheme did not work properly on
AlphaPC 164SXs. Also, be silent about the fact that 0/8/x does not
have its interrupt mapped; this is to be expected on the 164SX (this is
the Cypress PCI-ISA bridge, which has IDE wired to compat mode on functions
1 and 2; the 164SX does _not_ have PCI IDE on device 11 like other AlphaPCs).
1998-05-11 23:36:46 +00:00
d5157b2b05
Sync w/ reality
1998-05-11 00:34:24 +00:00
687ea7404c
Fix some arithmetics lossage on typeless pointers.
1998-05-08 16:55:15 +00:00
4665241bf8
Simplify the direct-mapped DMA case somewhat by adding a window base
...
member to the DMA tag, and calling the direct-mapped back-ends directly,
rather than through chipset-specific front-ends which pass the window
base as an additional argument.
1998-05-07 20:09:37 +00:00
294015435b
remove the unneccessary alpha_mbs and slight cleanup
1998-05-05 22:01:54 +00:00
742983f1eb
make it impossible to compile w/o SIO (you cannot have a console otherwise
1998-05-05 22:01:31 +00:00
1363662600
update for new ws stuff, plus cleanup
1998-05-05 22:00:28 +00:00
0713044d87
carry over new ws words from GENERIC
1998-05-05 20:29:18 +00:00
bcfe658515
Move declaration within block where it will be used (in case
...
keyboard not defined).
1998-05-05 20:10:05 +00:00
88bf077524
Don't need options UVM and PMAP_NEW anymore; they're now standard.
1998-05-04 04:38:28 +00:00
22e3e4691d
Make UVM+PMAP_NEW the standard VM system on NetBSD/alpha.
1998-05-04 04:35:46 +00:00
53dbd5b7fc
Add file-system MFS to support ftp download of sysinst.
1998-05-03 23:15:45 +00:00
abbe1b7df3
Add Ensoniq AudioPCI driver. Commented out until tested.
1998-05-01 22:26:54 +00:00
b3cdc88a22
Fix some whitespace.
1998-05-01 05:22:16 +00:00
d38d75c9fb
Include net/route.h
1998-04-30 08:27:59 +00:00
1e075b072d
Rewrite active_pmap() and again kill the reborn curproc bug.
1998-04-30 08:27:00 +00:00
de4d1c62af
pretty much redo interrupt code- now handles shared interrupts and solves the buspin int problem
1998-04-30 04:31:19 +00:00
e3904356a4
do some mbs before a config read/write
1998-04-30 04:25:22 +00:00
1686aca01d
Pull in opt_gateway.h as appropriate.
1998-04-29 23:11:00 +00:00
9e97d1cc17
Define Pyxis Interrupt Mask and General Purpose Output registers.
1998-04-29 03:09:26 +00:00
47a53b61ec
Add the DEC 550 Personal Workstation slot.
1998-04-29 02:41:41 +00:00
371b1a7fb7
Define the DEC 550 Personal Workstation (Miata) systype.
1998-04-29 02:39:24 +00:00
829fa05638
Ignore any `-' characters that might have been passed in the boot flags.
1998-04-29 02:13:51 +00:00
a152517daa
Add interrupt counter space for the DEC EB64+, and fix a misplaced
...
counter comment in the kn300 interrupt counters.
1998-04-29 00:34:06 +00:00
28b467b65b
Add support for the DEC EB64+.
1998-04-29 00:24:59 +00:00
23a168699c
Build EB64+ PCI support if DEC_EB64PLUS is configured.
1998-04-29 00:24:28 +00:00
861c7a7e2d
Add a stub pckbc_machdep_cnattach() which simply returns an error. This
...
function is meant to glue the new pckbd driver to the old console code
on ports which use the old PC-style console code. This will eventually
be purged when all of the old legacy consoles have gone away.
1998-04-28 19:14:27 +00:00
4ccb48a525
Try (again) to get the chip number right for Alcor and Pyxis, using the
...
following (iffy) hueristic:
CIA revision 1 -> 21171
CIA revision 2 -> 21172
CIA revision > 2 -> 21174
1998-04-28 18:11:35 +00:00
thorpej