b217194508
Fix the semantics (and the comment describing them) of pmap_update(). This
...
function is intended to process any deferred pmap operations, and is not
meant as a general means of flushing the TLB. Since this pmap module does
not defer any operations, make pmap_update() do nothing.
1998-04-27 19:17:16 +00:00
30188853dc
Increase the efficiency of pmap_l{2,3}pte() somewhat, by allowing the
...
caller to pass an optional 3rd argument, which is the previous level
PTE corresponding the virtual address. If this argument is non-NULL,
the table walk otherwise necessary will be bypassed.
1998-04-27 19:07:03 +00:00
a53c1863fe
Provide definitions for intptr_t and uintptr_t, signed resp. unsigned integral
...
types large enough to hold any pointer.
1998-04-27 17:39:10 +00:00
7f77474219
Oops, forgot to delete. It's in dev/pci now.
1998-04-26 11:57:00 +00:00
384418e4b7
"Whitespace" does not mean uncommenting a reference to a file that does not, as yet, exist in the tree
1998-04-26 05:18:50 +00:00
b6eff278f2
Fix some whitespace lossage.
1998-04-25 00:12:44 +00:00
660e718e2e
Drivers for PC-like console devices are MI now.
1998-04-24 20:05:54 +00:00
6f3b521cd5
Whitespace sanity.
1998-04-24 18:18:41 +00:00
6cd64be0b6
fix minor typo
1998-04-24 01:25:18 +00:00
2b6154a68c
Add PCI IDE.
1998-04-18 01:19:40 +00:00
792e89a201
Add PCI IDE goop.
1998-04-18 01:19:08 +00:00
4fc79b8fd3
First cut at PCI IDE compat interrupt support for the EB164 systype.
...
PCI IDE is found on the AlphaPC 164SX's Cypress PCI-ISA bridge.
1998-04-18 01:18:37 +00:00
574b87a792
Initialize the PCI IDE compat interrupt PCI method to NULL; PCI IDE
...
compat interrupts are not currently supported on these platforms.
1998-04-18 01:12:23 +00:00
78c7ebb2d0
Add a second Alpha-specific pci_chipset_tag_t method for establishing
...
PCI IDE compat interrupts. Note that this function is optional, and
platform-specific code may initialize the pointer to NULL.
1998-04-18 01:10:54 +00:00
a5f006fb5f
Fix a typo.
1998-04-18 01:09:20 +00:00
783382095c
Machine-dependent bits for PCI IDE. This redirects PCI IDE compat interrupt
...
goop to the appropriate platform-dependent code.
1998-04-18 01:08:52 +00:00
e77859a612
Hmmm... handle the case where there is no keyboard configured (panic
...
if the console selection is asking for it). Also add the stuff that
was missing from dec_kn300.
1998-04-17 02:45:19 +00:00
815703e5ec
Make function names in printfs and panics consistent.
1998-04-16 19:50:55 +00:00
a048ee73ca
Fix a whitespace botch.
1998-04-16 19:40:56 +00:00
2615a1d8d3
Allow device 8 (the SIO) to have its interrupt mapped; there might be
...
a PCI IDE controller on one of the PCI-ISA bridge's functions (e.g.
AlphaPC 164SX).
1998-04-16 19:24:24 +00:00
3cc1fe831c
count allocated screens correctly
1998-04-16 12:52:42 +00:00
c72ac312a7
Add pcppi/spkr drivers, and use DHCP for NFS boots.
1998-04-16 04:11:50 +00:00
f92ae39153
Make this compile if a Rawhide isn't configured.
1998-04-16 04:04:15 +00:00
512e80082b
add an AlphaServer 4100 Specific config file
1998-04-15 21:53:25 +00:00
a8d3df00ed
oops- add missing include
1998-04-15 21:42:24 +00:00
afeea01bbd
add back in display console stuff
1998-04-15 21:29:03 +00:00
b7c6c315ea
convert to new wscons
...
(pcppi->pckbc, pms->psm, wscons->wsdisplay)
1998-04-15 21:19:21 +00:00
b98513c4ff
convert to mi wscons
1998-04-15 21:15:08 +00:00
b9d78308c1
tell drivers that this port knows about the mi wscons stuff
1998-04-15 21:12:45 +00:00
534775fe76
explicitely initialize console keyboard
1998-04-15 21:06:46 +00:00
c5ea534f57
Switch the console to polling mode before accessing the keyboard with
...
interrupts disabled.
1998-04-15 20:51:10 +00:00
fba6e5e23a
update for new mi wscons, add ISA speaker
1998-04-15 20:48:52 +00:00
584f3e8aa0
Adapt PCI console selection to new mi drivers.
1998-04-15 20:46:34 +00:00
971dd06182
Adapt ISA console selection ti new mi drivers.
...
(was broken anyway, a "++" was missing somewhere)
1998-04-15 20:43:07 +00:00
70e72d5545
redo misleading comment (thanks, soren)
1998-04-15 20:37:39 +00:00
90fc55bdf9
use mi wscons and device drivers
1998-04-15 20:35:37 +00:00
f82e238b10
Don't need "delaybah" in the attach args anymore.
1998-04-15 20:11:10 +00:00
ba1ef83a1e
Don't use the ISA `delay port', since it no longer exists.
1998-04-15 20:10:52 +00:00
bd2e0fee32
delay handle was removed
1998-04-15 19:49:19 +00:00
6cc22e724e
Hmmm- how did that happen- I missed a merge
1998-04-15 01:18:17 +00:00
cddc0bf326
add Alpha 4100 support
1998-04-15 00:53:53 +00:00
6ad4ba8370
some cleanup
1998-04-15 00:51:00 +00:00
aed073a77f
add Alpha 4100 support
1998-04-15 00:50:14 +00:00
0ba76b38c8
spurious interrupt notification and finally adding vmstat -i support
1998-04-15 00:49:58 +00:00
0229740b5e
removal of unneeded define
1998-04-15 00:49:17 +00:00
5f59df9630
oops on byte enables for TurboLaser systems
1998-04-15 00:48:58 +00:00
4fa71d82a5
add Alpha 4100 support
1998-04-15 00:46:57 +00:00
17ec1fbf11
clarification of comment
1998-04-15 00:46:41 +00:00
65e5c41fad
do not cia include files here
1998-04-15 00:46:17 +00:00
d3f1c5b8d8
add Alpha 4100 support
1998-04-15 00:45:43 +00:00
164f56220e
Add support for the Cypress CY82C693 PCI-ISA bridge. This bridge is more or
...
less like an Intel SIO except that the ELCR registers are accessed differently
than on the Intel SIO.
XXX This code needs to be split up into bridge front-end and PIC back-end
XXX pieces.
1998-04-14 22:31:17 +00:00
4c01c3c48e
Pass the pci_chipset_tag_t to sio_intr_setup(). XXX This code should be
...
rearranged so that other non-PCI-but-in-all-other-ways-ISA-PIC-like
devices can share code.
1998-04-14 22:20:59 +00:00
b21bfbde11
Add -Wno-main conditional on compiler being gcc 2.8 or egcs. (This adds
...
a HAVE_GCC28 check-variable that can now be used to add other gcc-2.8
flags in cases where they may be useful, or to remove gcc 2.7.2 "bug
workaround" flags.)
1998-04-12 23:47:41 +00:00
e40e2ff2d0
A little buglet: softc for pceb is same as sio- so declare it as such.
...
By not doing so, a very obscure bug followed where the config search
stuff stopped at the bridge (pceb) and didn't even call match for the
two Qlogic ISP cards that followed.
1998-04-12 08:32:19 +00:00
05bb5a1d2f
revert back to 1.28
1998-03-30 17:52:03 +00:00
0ce9e8b825
We don't have software-only maps, so a NULL pmap_t will never be passed
...
to pmap functions.
1998-03-28 19:53:42 +00:00
cbc72091e5
Remove a comment that is not applicable in NetBSD - we don't have
...
software-only maps.
1998-03-28 19:44:49 +00:00
ce4810822b
Add autoconfiguration support for the Cypress 82C693 PCI-ISA bridge,
...
found on AlphaPC164SX boards.
Partially from Anders Magnusson <ragge@ludd.luth.se>.
1998-03-28 06:58:43 +00:00
c0ac8bae67
GC alpha's ECOFF_TOOLCHAIN make variable, and related bits. Nobody
...
should be using an ECOFF toolchain on NetBSD/alpha any more.
1998-03-28 00:50:41 +00:00
4893f22399
Much more sane boot block builds, from Chris Demetriou.
1998-03-28 00:21:35 +00:00
a95651eaea
Add a PMAP_KERNEL_PTE() macro that returns the PTE for a given KVA. If
...
DEBUG, this performs a table walk. Othwise, the Virtual Page Table is
used. Use this macro in a few places where this was done by-hand.
Make vtophys() use PMAP_KERNEL_PTE(). In non-DEBUG cases, this is
a fair bit faster.
1998-03-27 19:18:04 +00:00
2ce8cda3e5
Get rid of a /* in a comment.
1998-03-27 01:17:18 +00:00
b1e15c2005
Add some robustness to pmap_alloc_physpage(): Instead of panic'ing if
...
we can't get a page, find an inactive pmap and pmap_collect() it,
freeing up a few pages. Go ahead and die if we can't allocate a page
after 5 tries.
1998-03-27 00:52:43 +00:00
b86884a71a
Give pmap_collect() some substance: when called, a process is being
...
swapped out, so remove all of the physical mappings the process has
in order to free up the page table pages.
Since the pmap module is allowed to "forget" mappings, pmap_collect()
may be called in other situations where the memory situation is desperate,
although it's more likely that the pages will simply be needed again the
next time a process runs.
1998-03-26 22:18:36 +00:00
531db9e0d3
Sanity check the virtual addresses in the kernel and non-kernel cases
...
of pmap_enter() (and pmap_kenter_*()). Remove diagnostic check for
kernel pmap in pmap_alloc_asn().
1998-03-26 19:06:28 +00:00
040f7cbc70
Remove references to pmap.old.h - It should have just been pmap.h, but
...
that isn't necessary, either, since <vm/vm.h> is already included.
1998-03-26 18:17:13 +00:00
c4ba627afc
Kernel config file for bishop.nas.nasa.gov and ripley.nas.nasa.gov,
...
AlphaStation 500 and AlphaStation 600, respectively.
1998-03-26 03:00:36 +00:00
9234f2450b
Enable DDB history, netbsd.gdb.
1998-03-26 02:58:48 +00:00
6111783e61
if NEW_SCC_DRIVER, 3000/300 and 3000/500 aren't PROM console candidates.
1998-03-26 02:53:21 +00:00
a9e071bef5
defopt NEW_SCC_DRIVER
1998-03-26 02:52:43 +00:00
1282aca230
Add options UVM, PMAP_NEW, and NEW_SCC_DRIVER.
1998-03-26 02:51:46 +00:00
73f1a02583
If NEW_SCC_DRIVER is defined, the 3000/300 and 3000/500 are not
...
PROM console candidates.
1998-03-26 02:45:34 +00:00
7b4da708cc
Add support for attaching a zstty as the console, conditional on
...
NEW_SCC_DRIVER.
1998-03-26 02:43:22 +00:00
4a4bccc923
Remove references to NEW_PMAP.
1998-03-26 02:21:46 +00:00
76ba34c797
Remove references to "new_pmap".
1998-03-26 02:19:02 +00:00
456b3df281
Remove the Mach 3 pmap from the tree, replacing it with the contents of
...
pmap.old.<whatever>. To see the history, look at the corresponding
pmap.old.<whatever> file.
1998-03-26 02:18:03 +00:00
3ac5a77c70
Make pmap_kremove() deal with mappings entered with pmap_enter() as well.
...
Prevents stale PV entries from lingering around. Fixes a nagging
"kernel stack not valid halt" I was seeing with PMAP_NEW.
Idea from Chuck Cranor.
1998-03-25 22:52:28 +00:00
db6aafad0b
With new pmap stuff, the need for MSS3 goes away.
1998-03-25 18:33:41 +00:00
3786a63843
1. Always link at the high address, now that we can use free ram below
...
the kernel on most platforms, including all of the entry-level platforms.
2. Kill the comments and options for load address selection.
3. Kill the default -g.
1998-03-25 02:16:41 +00:00
e6cf334f5c
Keep a few things that reference kernel variables out of the namespace.
...
Add a check to see if libkvm is using this file.
1998-03-25 00:44:34 +00:00
49408401a3
In pmap_destroy_lev1map(), fix a problem where the pmap's ASN wouldn't
...
be invalidated if the pmap is not active. A rare thing (in fact, I'm
having trouble thinking of a scenario where it would happen), but it was
incorrect, nonetheless.
1998-03-24 22:02:44 +00:00
ea074f229a
cdev_decl the "zs" device (which is really zstty).
1998-03-24 05:17:14 +00:00
0105ff6f53
Update my DEC 3000/400 kernel config to reflect usage of the MI SCC driver.
...
Do not try this at home. Caution: hot coffee is hot.
1998-03-24 05:16:30 +00:00
db00f6f709
Define attachments for the MI SCC driver - only hooks up to ioasic
...
for now.
1998-03-24 05:15:07 +00:00
a26a53fbbc
Slight hack to allow the MI SCC driver to be used at cdev major 15
...
for testing purposes. Normal kernels still get the Alpha-specific
SCC driver.
1998-03-24 05:13:59 +00:00
ee83014c4d
Initial mostly-working ioasic attachment for the MI 8530 SCC driver. It is
...
enough to use as a console on my DEC 3000/400 (connected to a VT-520
terminal).
XXX The MI SCC driver needs serious changes to handle platforms which
have muliple SCC attachments (e.g. the Alpha port, which has an ioasic
attachment for TurboChannel systems and a gbus attachment for TurboLaser
systems).
XXX The MI SCC driver also needs changes to deal with the wacky (to put
it mildly) way the chips are wired up on the ioasic (on both TC Alphas
and DECstations). These are going to come along later.
1998-03-24 05:12:00 +00:00
4ccb969d0b
Okay, handle the ALLOCNOW case by doing the appropriate adjustments
...
up front. Do the spacing arithmetic slightly differently.
1998-03-23 07:51:25 +00:00
8e5970917e
Redo it slightly so that S/G now appears to work a bit better. This
...
version has 2GB direct map starting at 2GB, and either 256MB or 1GB
S/G starting at 1MB. I've done *some* testing on this, but I'm not
quite happy with it yet.
1998-03-23 07:42:40 +00:00
88c34f6f5f
Spaicing for 32 bit ptes (dwlpx only, really) is 0x20, not 1
1998-03-23 07:09:12 +00:00
66194d05bc
Do a more complete job of figuring out what kind of DWLP? we have- figure
...
out how much s/g ram is available. Can't really use the 128K entry S/G
ram yet- but I'll fix that later. More importantly, add in a dwlpx_iointr
handler that will try and figure out what the DWLPX error is and at
least print out what is happening- I actually found it useful in S/G
entry debugging as it could tell me that I had some bad S/G entries.
1998-03-23 06:38:10 +00:00
51ba315ba2
Slightly restructure interrupt handling to accomodate the addition
...
of a dwlpx_iointr vector.
1998-03-23 06:32:39 +00:00
7c83bc0da6
Prepare for handling multisized S/G maps. Specify dwlpx_iointr function.
1998-03-23 06:31:54 +00:00
d3d99a28c9
Update #ifdef'ed-out changes from pmax :
...
* Add more #ifdef pmax/#endif, #ifdef alpha/#endif where appropriate.
Config and heade files need more work (or replacement)
change TK_NOTYET to HAVE_RCONS
change commented-out /* && cn_tab.cn_screen */ to && raster_console()
* Add DDB hooks.
* Note where Alpha console ignores carrier on consoles.
* Add pmax-derived console tty-size code inside HAVE_RCONS
* Fold in gross pmax rcons-input hooks, inside HAVE_RCONS
Untested, but whitespace/ifdef only, cross-compiles OK,
preprocessing shows no significat differences (famous last words)
1998-03-22 08:24:52 +00:00
a5260cbda0
Use atomic set/clear bits in pmap_activate()/pmap_deactivate().
1998-03-22 07:27:54 +00:00
fcfe2f1539
Implement a set of `atomic' (using load-locked and store-conditional)
...
operations. Initial set includes:
alpha_atomic_setbits_q() set bits in a quad
alpha_atomic_clearbits_q() clear bits in a quad
1998-03-22 07:26:32 +00:00
9db8ae93c8
- The pmap now includes support for ASNs. We no longer need to flush
...
the TLB and I-cache in the SWITCH_CONTEXT macro.
- Right after switching to proc0's newly-created context at startup time,
flush the TLB and I-cache; this is the only place where it's not done
automatically.
- Fix a nasty bug in a critical section of cpu_switch(); change the
pmap_activate -> SWITCH_CONTEXT -> pmap_deactivate sequence to
pmap_deactivate -> pmap_activate -> SWITCH_CONTEXT. This prevents
erroneously marking a pmap inactive if switching to a process that
shares it's address space (and thus its pmap) with the oldproc! Noticed
by Chris Demetriou.
1998-03-22 05:46:02 +00:00
c0cc1ed476
Implement support for Address Space Numbers, greatly reducing the number
...
of TLB and I-cache flushes, significantly speeding up context switches.
Once again, many thanks to Chris Demetriou and Ross Harvey for code
review and debugging assistance!
1998-03-22 05:41:37 +00:00
a8d86e5a7c
Replace PMAP_ASNGEN_INVALID with PMAP_ASN_RESERVED.
1998-03-22 05:39:50 +00:00
86b6520e41
more TS_WOPEN to tp->t_wopen changes
1998-03-21 23:36:19 +00:00
0dae91d9af
Eliminate uses of TS_WOPEN in hard-wired devices.
1998-03-21 22:52:59 +00:00
34f87569b9
add some error defintions
1998-03-21 22:02:42 +00:00
66d8f5b544
sync systypes w/ <machine/rpb.h>
1998-03-20 21:48:21 +00:00
63c73f94e3
Add a few more systypes.
1998-03-20 21:48:03 +00:00
0f95ffdc1d
Nuke swpctxt(); it's only used by the Mach pmap, which we will only ever
...
use for reference.
1998-03-19 06:44:25 +00:00
003c50d1d5
Add a macro to invalidate the TLB for a given pmap/va pair. TLB
...
invalidation algorithm:
if (old mapping had PG_ASM set || pmap is active) {
TIBS(va);
if (also sync I-stream)
imb();
}
The check for "old mapping had PG_ASM" will get all kernel mappings (since
kernel mappings always have PG_ASM set).
This allows us to remove the bogus check for the kernel pmap in
active_pmap() - do so.
Use the new TLB invalidation macro whenever such action is needed.
1998-03-18 23:55:25 +00:00
15adb17803
Eliminate the last argument from pmap_remove_mapping(); it makes its own
...
decisions about TLB invalidation.
1998-03-18 23:11:44 +00:00
7ee4af11a7
Change active_pmap() to use the CPU mask (XXX and check for kernel pmap
...
as well, until some other changes are made). Nuke active_user_pmap(),
and change the places that used it to use active_pmap() instead (as well
as make some DIAGNOSTIC consistency checks).
1998-03-18 22:50:50 +00:00
605472f676
Optimize out a TLB invalidation in a common case of pmap_enter(): if
...
the PTE was previously invalid, no TLB invalidation is necessary because:
(1) when a PTE is invalidated, its entry is flushed from the
TLB
(2) the PALcode won't install an invalid PTE into the TLB.
1998-03-18 22:13:58 +00:00
cfdf9a95ad
Keep track of which CPUs are using a pmap by setting/clearing bits
...
in the pmap's CPU mask in pmap_activate()/pmap_deactivate().
1998-03-18 21:57:03 +00:00
43614761e3
In cpu_exit() deactivate the address space before freeing the vmspace
...
structure. We will continue to run on this context (which is the
global Lev1map at this point) right up until we switch to proc0's
context in switch_exit().
1998-03-18 20:38:07 +00:00
87eb2cfded
Don't call pmap_deactivate() if we jumped into the middle of cpu_switch()
...
from switch_exit(), since by this time, the vmspace will have already
been deactivated and freed.
1998-03-18 20:36:13 +00:00
b637a998f4
Add ASN housekeeping and a CPU mask to the pmap.
1998-03-18 19:39:23 +00:00
961a955498
Move the "are we active" macros out of the header file.
1998-03-18 19:27:46 +00:00
d37acae24c
Add a DIAGNOSTIC checks for the kernel pmap in pmap_create_lev1map()
...
and pmap_destroy_lev1map(). Correct a comment in another DIAGNOSTIC
panic.
1998-03-18 19:21:50 +00:00
06b49b8f3e
Change a couple of assert()s to DIAGNOSTIC panics.
1998-03-18 19:12:57 +00:00
438599b408
Correct a comment in pmap_bootstrap().
1998-03-18 19:04:42 +00:00
56e004c995
Pass the max ASN from the HWRPB to pmap_boostrap().
1998-03-18 19:02:49 +00:00
426d2953f5
Add a macro to test if PG_ASM (Address Space Match) is set in a PTE.
1998-03-18 19:00:15 +00:00
9f50fca1fd
Add commented out "options FFS_EI"
1998-03-18 16:34:41 +00:00
9c1e8fc2ed
Implement the PMAP_NEW interface for UVM.
1998-03-17 05:15:24 +00:00
1477f77353
Properly depend on the PMAP_NEW option.
1998-03-17 05:00:18 +00:00
6bbfd3e9ff
Use pmap_kenter_pa() in _bus_dmamem_map() if PMAP_NEW.
1998-03-17 04:59:36 +00:00
f8cff5ab23
Add a software PTE bit that indicates that a va -> pa mapping was entered
...
in the physical->virtual list.
1998-03-17 04:53:43 +00:00
00452b441f
Move PTE-related constants here, and make them not depend on a hard-coded
...
page size (i.e. use the one initialized from the HWRPB at boot time).
Do a bit of cleanup while here, rendering old inherited constants obsolete.
1998-03-12 07:29:21 +00:00
4d8723232d
Garbage-collect a bunch of constants that were inherited, but are no
...
longer necessary or make sense.
1998-03-12 07:28:07 +00:00
bd3c0e36cf
Garbage-collect this a bit.
1998-03-12 06:47:11 +00:00
00a597fe92
Use vm_page_alloc1() and vm_page_free1() as appropriate.
1998-03-12 06:27:36 +00:00
1f8d640c4b
Bump maxusers to 64.
1998-03-12 06:04:47 +00:00
6e6e2d7ebf
Dump maxusers to 32.
1998-03-12 06:04:31 +00:00
d9a1f8ba36
Adjust the default and low-bound maxusers, now that the pmap can deal.
1998-03-12 06:04:14 +00:00
dfe0937a7e
If not DEBUG, use the Virtual Page Table to get the PTE for kernel mappings
...
in pmap_enter() and pmap_emulate_reference().
1998-03-12 02:59:22 +00:00
30766180a3
Nuke these; they are long-since obsolete.
1998-03-12 01:28:01 +00:00
152a4bfa60
Increase the maximum userspace address to 4TB. Leave the stack at 8G
...
for now, but make a note that we might want to move it down to 4G later.
1998-03-12 01:25:52 +00:00
e046925c3a
Massive cleanup and partial rewrite of the NetBSD/alpha pmap module.
...
Major change is that page table page management has been completely
rewritten. Page tables are now accessed via K0SEG (no more KVA space
wasted on user page tables), and a much larger user address space is
supported.
Many thanks to Chris Demetriou and Ross Harvey for helpful insight and
debugging assistance.
1998-03-12 01:24:52 +00:00
900e1c90bd
Nuke ALPHA_STSIZE and ALPHA_MAX_PTSIZE. Add macros to compute and operate
...
on segments mapped by L1 and L2 PTEs.
1998-03-12 01:21:21 +00:00
7225aae835
Move check for user-pmap-still-using-Lev1map from pmap_enter_ptpage()
...
to pmap_enter().
1998-03-09 22:31:23 +00:00
daa9cfae50
Don't do the Segtabzero-for-dev-zero hack.
1998-03-09 20:43:28 +00:00
e456fc0538
Simplify/speed up pagemove() somewhat by using the Virtual Page Table.
1998-03-09 20:17:03 +00:00
78a173bada
Define VPT_INDEX(), which computes the index into the Virtual Page Table
...
of the PTE that maps the specified virtual address.
Thanks to Chris Demetriou and Ross Harvey for clarifying the VPT.
1998-03-09 19:57:57 +00:00
b3d7fd8f3f
Just use vtophys() to get the PCB phys addr.
1998-03-07 04:20:45 +00:00
9c236919e9
Rewrite pmap_extract(), and use it as appropriate in vtophys() rather
...
than (almost) duplicating the code.
1998-03-07 03:37:02 +00:00
cd7d081d02
Export a pointer to the Virtual Page Table.
1998-03-07 03:15:43 +00:00
f7d64ef778
Clean up a comment.
1998-03-07 03:15:06 +00:00
f55b280ffc
Clean this up a bit.
1998-03-07 01:44:08 +00:00
dcbc04e7af
Rename Sysptmap and Sysmap to Lev2map and Lev3map, respectively, and
...
add some comments describing in better detail what they are and how they
are used.
1998-03-07 01:43:54 +00:00
60e6d2e48f
Update a comment in pagemove().
1998-03-07 01:26:04 +00:00
ff155df72a
Nuke kvtopte(). Also, change pagemove() to lookup the from and to PTEs
...
in each iteration of the loop, since PT pages may not necessarily be
contiguous.
1998-03-07 01:11:39 +00:00
60d30d3838
Nuke kvtopte() and ptetokv().
1998-03-07 01:10:05 +00:00
58a7bd9288
Nuke the vatopa() macro.
1998-03-07 00:42:07 +00:00
059d0c72de
pmap_ste() -> pmap_l2pte(), pmap_pte() -> pmap_l3pte()
1998-03-06 23:41:01 +00:00
8081bd3017
Move pmap_pte*() macros into the header file, nuke pmap_ste_v(), add
...
pmap_lev1pte().
1998-03-06 23:19:26 +00:00
53e3bf87b9
Fix think'o in last kcopy() change.
1998-03-05 02:10:57 +00:00
a2db880e8c
In kcopy(), make sure we save and restore the old fault handler; kcopy()
...
is called from uiomove(), which may be in the code path of servicing
a non-fatal page fault caused by a copyin() or copyout().
1998-03-04 02:11:58 +00:00
09dbd9234d
fix typo in last commit (noticed on inspection)
1998-03-02 21:36:55 +00:00
7ff7b02fac
allow LDSTATIC definition to be overridden by bsd.own.mk/mk.conf
1998-03-02 20:01:05 +00:00
9da165424c
allow LDSTATIC definition to be overridden by bsd.own.mk/mk.conf
1998-03-02 19:57:00 +00:00
03169f0089
Second part of cdev_decl() migration. Declare cputype variable.
...
Add config info for a12 switch driver and console driver.
1998-03-02 08:04:04 +00:00
41a61f7c9e
Update interrupt name table for a12 crossbar.
1998-03-02 07:47:52 +00:00
b8d5ca6c78
Centralize cdev_decl() for these MI drivers + a12dc in machine/conf.h (cgd)
...
(This does not introduce any config or option dependencies.)
1998-03-02 07:44:18 +00:00
ff94450f84
Use the more consistent register field names & add ctags(1) keys.
1998-03-02 07:07:41 +00:00
6e6f663204
Rewrite of interrupt dispatch logic. Add ctags(1) keys for *a12*.h files.
1998-03-02 07:03:20 +00:00
13aeff8570
Fix attachment message.
1998-03-02 06:59:38 +00:00
1ada245647
Support attachment of xb and a12dc, define most of the remaining
...
core logic register fields.
1998-03-02 06:56:16 +00:00
469f9b6126
Clean up attachment code and prototypes.
1998-03-02 06:53:34 +00:00
7a571c643b
Rename a few macros to better describe what they are:
...
- kvtol1pte() -> l1pte_index()
- vatoste() -> l2pte_index()
- vatopte() -> l3pte_index()
1998-03-02 00:49:01 +00:00
54bb4f9e6e
Rewrite pmap_enter() to have a more sane structure, useful for when
...
page table page management is rewritten.
1998-03-02 00:22:54 +00:00
4ebd177543
Remove the A12 from the rogue's gallery of the promcons-addicted.
1998-03-01 08:17:36 +00:00
39254d4d4b
Poll console at 50 Hz, not 1024 Hz! (4 tlb and imb coherency ops per poll
...
make this exceedingly expensive even on an alpha) Note: only 3 systypes
still use promcons.
1998-03-01 07:40:11 +00:00
2170c2a46d
Force elf symbol sections to an addressable boundary.
1998-02-28 10:38:55 +00:00
18a1481f7a
Use NFS_BOOT_DHCP rather than NFS_BOOT_BOOTP. The former is more
...
flexible, and the boot blocks use DHCP already(!!!) and it'd be good
for the kernel to be consistent with them.
1998-02-28 02:01:32 +00:00
ba3ddd48ad
Move the code that enters and removes entries from the pv_table into
...
functions pmap_enter_pv() and pmap_remove_pv().
1998-02-28 01:07:05 +00:00
9bbe89ea3f
Garbage-collect the kpt_page stuff; it was basically unused in this
...
pmap, and isn't applicable to how dynamically allocated kernel page
tables will work on the Alpha.
1998-02-27 22:25:25 +00:00
faf1155de5
Revamp pv_table management:
...
- Make pv_table an array of struct pv_head's, which contain LIST_HEADs
for the pv_entry's, as well as page attributes (mod, ref, ptpage).
- Use <sys/queue.h> to manipulate pv_entry lists.
- Fix several obvious bugs in pmap_collect_pv().
- Use K0SEG to access pv_page's.
1998-02-27 19:39:03 +00:00
f17bbcfffa
Changes necessitated by the fact that all pmaps have their own level 1
...
page tables: use curpcb to determine which level 1 map defines the
current VM context, and use that level 1 map when mapping and unmapping
the PROM.
1998-02-27 04:03:00 +00:00
c4e7c88520
Step 1 of the Grand Alpha Pmap Rototill:
...
- Clean up pmap_bootstrap() some, and make a slight change to how the
PROM mappings are saved.
- Give each pmap its own level 1 page table, rather than sharing a global
level 1 page table. This will eventually allow for Very Large user
address spaces.
- Keep a list of all pmaps, so that when kernel level 2 page tables are
allocated, all level 1 tables may be updated.
- Add a couple of functions for allocating and freeing page table pages.
- Add a few comments about ASN allocation.
1998-02-27 03:59:58 +00:00
5d56ce57ba
Several changes related to all pmaps having their own level 1
...
page table:
- Update the current hwpcb pointer in the SWITCH_CONTEXT macro, so that
we know it's always correct.
- Optimize cpu_switch(): if we're switching to ourselves, skip the
actual context swap.
- Clean up some comments and remove some code rendered obsolete by
the fact that address spaces are now selected by switching to a
new level 1 page table.
1998-02-27 03:53:49 +00:00
cb6972d4d3
Implement alpha_pal_swpctx().
1998-02-27 03:44:53 +00:00
1ed8ea9966
note second parm of sysarch() is now void *, + trivial KNF, etc.
1998-02-25 21:41:55 +00:00
58509e699f
Add support for UVM.
1998-02-24 07:38:01 +00:00
772da350d4
Disable the message buffer during crash dumps by clearing msgbufenabled,
...
not msgbufmapped.
1998-02-19 04:18:30 +00:00
3b9429b248
Minor changes to make all the float.h files match.
1998-02-18 11:01:27 +00:00
f19c0ee648
nuke pmap_map(). it's an internal MD function, and it's unused
1998-02-18 01:44:32 +00:00
8354e68508
Remove "class" declarations, and add "devclass" declarations where
...
appropriate. Fix several inconsistencies between device class and
attributes. Mostly from Chris Demetriou.
1998-02-16 22:12:45 +00:00
b4e77b173a
Add support for non-contiguous physical memory, using MACHINE_NEW_NONCONTIG.
...
These changes also recover memory that is located before the kernel in
the first system software segment on systems which do not use the PROM
for console I/O. Written by Chris Demetriou and myself.
1998-02-16 03:59:55 +00:00
1584dc4420
The pmap_emulate_reference warning about the page not being managed should
...
be a panic instead. If it's hit, "random" memory is going to be corrupted.
1998-02-14 02:04:05 +00:00
1538076f47
fix pasto in last (sigh)
1998-02-14 01:18:46 +00:00
ab67040f58
fix for (harmless) bogon introduced in last commit
1998-02-14 01:17:19 +00:00
e719e8f703
adjust kernel core dump code for changes in kcore.h, also clean up
...
slightly.
1998-02-14 00:53:26 +00:00
69d88fbfd6
replace the single phys_ram_seg_t with a count. an array of segment
...
descriptors will be placed after this structure in the core file.
1998-02-14 00:17:57 +00:00
2c12105cda
Remove comment which says that fxp is untested (it is known to work now).
...
Also, make model name closer to what driver prints startup.
1998-02-13 04:33:30 +00:00
25d056473c
Clean up kernel initialization. Use the bootinfo structure (or innate
...
knowledge) earlier, and gather all information needed earlier. Mark the
init code carefully re: when it can print stuff out, when it can expect
the firmware to stop working, etc. Be more careful about using the PROM
console and other PROM facilities, and hint that in the future all use
of firmware/boot program callbacks by the kernel should go away (since
the world may not be mapped the way the firmware/boot program wants!).
1998-02-13 02:09:03 +00:00
b22ad9fe1a
Define a lookup table for Alpha platform variation names.
1998-02-13 01:29:09 +00:00
bdc328cb13
Use the platform family name in alpha_unknown_sysname().
1998-02-13 00:27:37 +00:00
bd60d9c62d
Rewrite the way the platform model string is determined:
...
- Attempt to find the model string in the HWRPB's DSR area. Failing that
(if the HWRPB version is too old)...
- Look up the system variation in a variation/string table. Failing that
(unknown variation)...
- Create a default model string using the variation number.
Also, factor out a bunch of common code.
1998-02-13 00:12:45 +00:00
44df600994
Define the structure of the HWRPB's Dynamic System Recognition area.
1998-02-13 00:07:25 +00:00
7fbc685c06
Make it a little more clear that the "eb164" systype doens't necessarily
...
mean that a machine is a DEC EB164 (it may be an AlphaPC 164, which is
different, from the firmware's perspective).
1998-02-12 20:46:47 +00:00
314f40f8d8
We can't count on the CIA revision register telling us if we're a 21171
...
or 21172, so make the chip/revsion output a little more sane.
1998-02-12 20:43:45 +00:00
5a1a26d325
set 'hwrpb' in a way that works exactly the same way as the previous
...
code, but looks significantly less gross.
1998-02-12 02:54:02 +00:00
c7ba12ab93
rename struct rob's "rpb" element to "rpb_phys" for clarity. also,
...
change its type from a pointer to a never-defined structure to a
u_int64_t.
1998-02-12 02:27:48 +00:00
92d17b5b50
clean up the way bootinfo information is passed and used: move the version
...
number passed by the boot block into a register, change the kernel's
bootinfo handing so that it always uses bootinfo to get bootinfo-ish values
(filling them in if the boot blocks didn't pass them), and make versioning
a small bit more sane.
1998-02-12 01:53:18 +00:00
c26f962957
Use kernel_map in bus_dmamem_{map,free}().
1998-02-11 03:08:31 +00:00
30aa56fc66
Use M_DMAMAP where appropriate.
1998-02-11 01:37:51 +00:00
e21b7a5995
leave space for bootstrap stack when calculating kernstart
1998-02-11 00:05:33 +00:00
1951c4b19b
Bump KNMEMCLUSTERS slightly, and make it more obvious how to tune it
...
(lifted from i386 port).
1998-02-10 03:53:01 +00:00
68d3b764ce
Make it easier to keep the scaled VM_*_SIZE values in sync w/ the
...
constants.
1998-02-10 03:52:05 +00:00
5887833ac7
Kernel for babylon.netbsd.org.
1998-02-10 00:48:14 +00:00
8e69ee392a
Fixup includes.
1998-02-04 23:41:45 +00:00
612aea038c
Use the common _bus_dmamap_sync() as the _dmamap_sync method in the
...
bus_dma_tag_t.
1998-02-04 07:37:28 +00:00
1a2b1a18f2
The _dmamap_sync method is no longer optional.
1998-02-04 07:36:10 +00:00
b1d8bffad8
Flush the CPU write buffer in _bus_dmamap_sync().
1998-02-04 07:35:30 +00:00
8abe76d2f0
Add offset and length parameters to bus_dmamap_sync(), used for specifiying
...
partial syncs of a DMA mapping.
1998-02-04 05:12:46 +00:00
99cc8482d1
Change the last argument of bus_dmamap_sync() from bus_dmasync_op_t to int,
...
and allow more than one synchronization operation to be specified in
a single call. Dissallow mixing of PRE and POST operations.
1998-02-04 01:57:27 +00:00
2d403996b2
Add dm_mapsize to bus_dmamap_t and rename BUS_DMAMEM_NOSYNC to
...
BUS_DMA_COHERENT.
1998-02-04 00:10:30 +00:00
5fd0d10994
Add dm_mapsize to bus_dmamap_t and rename BUS_DMAMEM_NOSYNC toBUS_DMA_COHERENT.
1998-02-04 00:04:25 +00:00
b5c132e4d2
Prototype __flt_rounds() consistently.
1998-02-03 01:26:20 +00:00
cfa47dfc11
Add support for installing boot blocks into ISO-9660 file system images.
1998-02-01 06:59:30 +00:00
fea34a1cf2
Bump the ramdisk size to 3M.
1998-02-01 02:55:42 +00:00
4efe4fc0da
le* at isa? isn't ready for prime-time yet.
1998-02-01 00:24:26 +00:00
d0cce6d144
Take Jason's most excellent advice on platform.model.
1998-01-31 10:55:42 +00:00
1e62e0ffd9
Remove the #include of rpb.h from clock.c and set hz from the hwrpb
...
in alpha_init() instead of from a hardwired 1024 in cpu_initclocks().
1998-01-31 10:32:47 +00:00
58fb6574f9
valloclim() was unused; kill it. #undef valloc() at the end of
...
allocsys().
1998-01-31 02:20:44 +00:00
6270ed1711
Add the A12 fast ethernet controller, an if_de.c hacked (prior to
...
bus_dma's appearance in the tree) to support sram bounce buffers.
When a busified if_de.c appears, this module can join awd.c at the
end of that long walk on a short pier.
1998-01-31 01:43:40 +00:00
3a83745247
In some hp300-derived pmaps, in pmap_page_protect(), don't walk off the
...
end of the list of physical->virtual entires into NULL space if the last
entry is (mysteriously) wired in the pmap. Add a DEBUG printf on alpha.
1998-01-31 01:32:55 +00:00
1559f49cd1
Correct a number of apparent errors in a few reboot paramemter block fields.
1998-01-29 22:28:52 +00:00
ccafd3dcb9
Define the A12 names.
1998-01-29 22:26:24 +00:00
f2d2b6bf68
defopt for AVALON_A12 and specifiers for all the platform modules.
1998-01-29 22:23:06 +00:00
18beceb2f9
Recognize Avalon A12 cputype code.
1998-01-29 22:20:15 +00:00
43a3471986
While here in alpha/stand, add a technically required imb coherency op
...
just before transferring to the kernel entry point.
1998-01-29 22:13:25 +00:00
c1972a428c
Avoid VMS palcode ops by using a different technique for cpu_number(),
...
and don't execute the VMS->OSF palcode switch if the OSF palcode
is already running...which will be the case if the console is not
the venerable SRM.
1998-01-29 22:09:37 +00:00
8430acf1e7
Add a12 platform support. The A12 is a scalable, distributed memory parallel
...
processor.
1998-01-29 21:46:33 +00:00
12f93343cd
Add basic platform support for NetBSD on the Avalon A12. I'm running this
...
CVS commit on one right now...
1998-01-29 21:42:50 +00:00
683fada0e3
Clean up duplicated code sequences and add an imb (a coherency operation)
...
whenever the console code is mapped and unmapped.
1998-01-29 21:11:58 +00:00
0c4d28f49e
Fix an alpha-specific page daemon wedge...the new pmap_clear_reference()
...
may be faster, but it was supposed to _clear_ PMAP_ATTR_REF, not _set_ it.
1998-01-29 05:44:57 +00:00
2538ed1062
Use offsetof() from libkern.h
1998-01-28 02:23:04 +00:00
5ac7e550d1
Implement bus_dmamap_load_mbuf().
1998-01-27 02:35:58 +00:00
15ae963bea
When dumping, print out the device number as major,minor.
1998-01-24 16:46:23 +00:00
cacd48c0d6
Print the correct error number if nfs_mount() fails. From Chris Demetriou.
1998-01-23 19:13:28 +00:00
9c3ef8899b
Don't conditionally define the sgmap_log_entry structure, and turn off
...
SGMAP logging by default.
1998-01-21 22:36:10 +00:00
3d9cd8a05a
Extent names are const.
1998-01-21 22:34:38 +00:00
12809e3434
If mapping only one segment of DMA memory into KVA space, use K0SEG.
1998-01-19 03:12:20 +00:00
c6d1f2e018
G/c LANCE DMA allocation goop.
1998-01-19 02:57:28 +00:00
e5e8573d5c
Allocate the LANCE DMA area and set it up here. This is still not
...
optimal (really should be done further down the food chain), but we
can't really do that in a nice way right now, and this is much better
than what we had before (which was to steal memory pages before the
VM system was bootstrapped).
1998-01-19 02:56:05 +00:00
bf92ae27ef
Pass a pointer to the "get this slot's DMA tag" function pointer to
...
the tc instance just like we do with the interrupt functions.
1998-01-19 02:54:24 +00:00
806e953f2c
Get the per-slot DMA tag a bit differently.
1998-01-19 02:53:29 +00:00
70da5cdba9
G/c an unused function pointer.
1998-01-19 02:53:03 +00:00
32d94859ea
adapt to changed <dev/ic/i8042reg.h>
1998-01-18 14:45:10 +00:00
e62d894d7a
Implement a prefetch spill page for SGMAP DMA. This works around a slight
...
annoyance on systems that prefetch the next page during memory -> device
DMA if the DMA comes within a certain distance of the end of the current
page. This could cause machine checks since the PTE after the last page
would not have the valid bit set.
(I'm not going to complain about this slight kludge too much, since prefetch
makes DMA much faster...)
1998-01-18 00:05:33 +00:00
8df306036a
Initialize s/g DMA registers in the same order as the CIA chipset's:
...
(1) window base
(2) window mask
(3) translation base
1998-01-17 22:46:55 +00:00
3366b987d0
Put SGMAP-related stuff in the DMA map structure directly, rather than
...
indirecting through a pointer.
1998-01-17 21:53:52 +00:00
63db8935a6
Fix initialization of DMA window 0:
...
- Make sure the page table is aligned to at least 32k.
- Don't consider the MEMCS signal when checking for a window hit.
1998-01-17 03:43:59 +00:00
9554b5a243
Update for "minptalign" argument to alpha_sgmap_init().
1998-01-17 03:40:32 +00:00
399f3639cf
Don't assume that we'll be using direct-mapped DMA for PCI.
1998-01-17 03:39:51 +00:00
361179df26
Make debugging decisions at run-time, and place a handy DDB breakpoint
...
after a transfer has been mapped in the page table.
1998-01-17 03:38:51 +00:00
2981fec2f0
Allow specification of a minimum page table alignment to alpha_sgmap_init().
...
This is to work around an apparent hardware bug in some 2117x chipsets
where the page table must be aligned to at least 32k.
1998-01-17 03:37:22 +00:00
6254765e6a
Make this compile again after recent config changes.
1998-01-15 22:22:09 +00:00
86adfd8033
Switch to MI IDE drivers, add ATAPI devices.
1998-01-15 07:17:19 +00:00
c60855e116
Switch to the MI IDE drivers.
1998-01-15 07:09:24 +00:00
f127dfb6f0
Undo the wdc -> awdc mapping kludge.
1998-01-15 07:02:21 +00:00
76e4297b91
No longer needed; we use the MI IDE driver now.
1998-01-15 07:01:51 +00:00
61826c3946
Make INSTALL a fully-loaded kernel (for booting from network or CD), and
...
INSTALL-FLOPPY a stripped-down version to fit on a floppy.
1998-01-13 23:49:31 +00:00
5419debcb7
Adjust for config changes.
1998-01-12 10:21:02 +00:00
c5f6a2dbb3
Add (commented out) COMPAT_13
1998-01-12 07:09:24 +00:00
83c4c24058
Add "non-volatile" memory cluster usage bit.
1998-01-12 07:07:19 +00:00
6f57e5c573
multiple include protect machine/limits.h, fixes pr 4473 (from Mika Nystrom)
1998-01-09 22:23:44 +00:00
1256fac296
Rearrange alpha_init() somewhat, setting the page size much earlier, and
...
keeping track of where the kernel lives in K0SEG. Place early data
structure allocation into an allocsys() function, like other ports, so
that it can be used to first calculate the amount of memory needed
for those data structures.
1998-01-09 21:34:47 +00:00
bb4988dca2
If MACHINE_NEW_NONCONTIG is defined, activate the pmap_steal_memory()
...
interface.
1998-01-09 19:13:09 +00:00
9c3e23d351
Compile in BOOTP support for diskless boot.
1998-01-09 17:10:16 +00:00
874db3d0e0
Selection of network configuration method for diskless boot can be
...
controlled by config options now. Remove setting of nfs_boot_rfc951,
it is set by default if "option NFS_BOOT_BOOTP" is defined.
1998-01-09 17:06:35 +00:00
e47378c640
- pmap_collect_pv() is broken; #ifdef it out (it's not currently ever
...
called anyway, but now at least the reason is documented).
- rearrange a few things to make it easier to add support for non-contigous
physical memory.
1998-01-09 08:27:09 +00:00
b115c27722
Get rid of some old cruft.
1998-01-09 08:18:22 +00:00
5170264d4e
Gather pv_table and pmap_attributes things togther, and macro'ize
...
access to them a little better.
Also, improve the performance of pmap_is_{referenced,modified}() and
pmap_clear_{reference,modify}() somewhat.
1998-01-09 06:54:17 +00:00
14807c2914
Use avail_start/avail_end.
1998-01-09 06:37:04 +00:00
f9b6954f55
Call vm_set_page_size() after initializing PAGE_SIZE.
1998-01-09 06:35:17 +00:00
015e898c02
RCSID Police.
1998-01-05 07:02:46 +00:00
3e0fad1868
RCSID Police.
1998-01-05 06:28:44 +00:00
b9f1b716f3
Now that all ports have pmap_activate(), and it has an identical interface,
...
prototype it in <vm/pmap.h>
1998-01-03 01:12:59 +00:00
8b5e0b6e06
Remove a couple of unneeded VM-related headers.
1997-12-31 19:32:55 +00:00
89951259ed
Add kernfs; remove more stuff we don't need.
1997-12-31 16:44:37 +00:00
feb6e077d4
do not incread vm_kmem_size that radically for 1GB or better machines
1997-12-16 21:59:41 +00:00
b52361ff54
add missing COMPAT_13 that kleink putzed
1997-11-30 23:18:59 +00:00
549ecbd70a
make SCSIVERBOSE default
1997-11-26 03:13:53 +00:00
61f3754047
add SYSVMSG and SYSVSEM to GENERIC kernel
1997-11-26 03:13:12 +00:00
66c2794142
Add _BSD_SUSECONDS_T_ and _BSD_USECONDS_T_; do some space vs. tab formatting
...
cleanup
1997-11-23 20:20:53 +00:00
261191603a
copyright foo
1997-11-19 15:35:36 +00:00
6c986561ee
* add commented out DDB_HISTORY_SIZE=100 if DDB exists in config file
...
* fix up use of 'options<SPACE><TAB>'
1997-11-17 01:57:23 +00:00
711247adf8
Eliminate %: use from alpha/trap.c; the policy is to get rid of these
...
anyway. I _still_ have my doubts about the kprintf %: code, though.
1997-11-17 00:52:49 +00:00
9dcfc52387
Put in Jason's recommended fix for the null-curproc-in-pmap.old.c problem.
1997-11-17 00:11:22 +00:00
940f8fcfd1
remove unneeded and conflicting prototype
1997-11-13 18:06:01 +00:00
ce4c770f88
Make sure CPP, AR, AS, and RANLIB are defined.
1997-11-12 23:11:50 +00:00
a421995756
Define LORDER, NM, and TSORT here, like we do the rest of the tools.
1997-11-12 22:25:31 +00:00
479bc8877c
Protect userland applications from the inline splraise function.
1997-11-10 18:23:50 +00:00
e22396f499
Clean up the messages displayed when either platform support is not
...
configured into the kernel, or when the platform is not supported.
Use the defopt'ed options, rather than NDEC_... and remove the needs-flag
hack that's existed for a while.
1997-11-06 00:41:45 +00:00
4730a8cbec
Bug fixes and cleanup from Chris Demetriou <cgd@pa.dec.com>:
...
- fix _C_LABEL so that it actually works.
- make __RENAME use _C_LABEL.
- fix __RENAME so that it expects an unquoted argument.
- fix __indr_reference and __warn_references so that they
supply their own final semicolon.
- define __warn_references to nothing if not GNU C (required
by the way it's used).
The __warn_references semicolon change has to be made
so that __warn_references can be defined into nothing.
(A ; all by itself isn't a great idea.) The __indr_reference
change was made for consistency.
1997-11-04 23:09:23 +00:00
6f6bb84844
Check for null curproc in pmap_changebit. Fixes the IDE-on-alpha crash
...
problem reported by Chris Csanady <ccsanady@bob.scl.ameslab.gov>.
this
1997-11-04 07:16:25 +00:00
0ea4820367
--Add handcrafted stack frame directives to locore.s palcode vector
...
--entries / remove kernel entry from locore / reorganize vector entry
--code. Enables access to stack frames transitively w.r.t. palcode
--vectors, e.g. upward traceback works, inverting (possibly several)
--kernel vectors. Until now, all trackbacks ended at the first-reached
--instance of trap(), which was totally useless as there is no mystery
--to trap->panic->cpu_reboot
1997-11-03 04:22:00 +00:00
3e8e744696
getopt returns -1 not EOF
1997-11-01 06:49:14 +00:00
32146049fa
Don't forget to account for scrollskip when computing the current row.
1997-10-27 01:37:33 +00:00
023044a749
Clean up printing of chipset revision/capabilities.
1997-10-27 01:08:42 +00:00
611012d836
Make the copy_region methods do overlapping copies properly. Fixes
...
port-alpha/4216 (Chris Demetriou).
1997-10-25 01:21:57 +00:00
19c77efe96
In vga_erasecols(), fix botched count and reversed arguments to
...
bus_space_set_region_2(). From Chris Demetriou <cgd@pa.dec.com>.
1997-10-24 23:03:02 +00:00
665f7d1a6e
Implement __RENAME() in <machine/cdefs.h>
1997-10-22 05:20:32 +00:00
5bd8e6eccc
MSS3 needs full SYSV stuff.
1997-10-20 19:48:30 +00:00
f29df68cd4
comment out rnd, mark as experimental
1997-10-20 18:47:08 +00:00
1a546804ed
First go at an INSTALL kernel (add ramdisk, remove unnecessary stuff).
1997-10-19 01:31:49 +00:00
bcced1d9be
Check return values from lseek; use SEEK_SET instead of 0.
1997-10-18 22:27:46 +00:00
c3f84c257a
more compile foo
1997-10-17 18:59:48 +00:00
c8fce5460c
more compile foo.
1997-10-17 18:58:16 +00:00
eb249946d0
Recover from some include file foo.
1997-10-17 18:47:30 +00:00
d13d5783e4
Add in missing includes.
1997-10-17 18:25:32 +00:00
6698c7b3e2
Adjust for new "com" driver home.
1997-10-16 00:58:08 +00:00
c83fc3eeb6
Remove __VM_PMAP_HACK.
1997-10-14 15:29:50 +00:00
c44bfc9eae
Make compile without DIAGNOSTIC set.
1997-10-14 06:22:02 +00:00
0e4e4777f8
Add pseudo-device rnd.
1997-10-13 06:59:58 +00:00
80513cb5ae
o Make usage of /dev/random dependant on
...
pseudo-device rnd # /dev/random and in-kernel generator
in config files.
o Add declaration to all architectures.
o Clean up copyright message in rnd.c, rnd.h, and rndpool.c to include
that this code is derived in part from Ted Tyso's linux code.
1997-10-13 00:46:08 +00:00
9803f46796
Minor rearrangement to match other files.
1997-10-11 09:12:18 +00:00
5c8d588138
Nuke NOOBJ.
1997-10-11 08:44:42 +00:00
acf0e569a5
Update all the tags goo, and use bsd.subdir.mk.
1997-10-11 08:42:02 +00:00
984390f178
Add now-working ipfilter.
1997-10-10 08:54:14 +00:00
6ab3092b11
Add byte-swapping functions (bswap16, bswap32, bswap64) to libkern.
...
Only assembly version for i386 bswap16 and bswap32 for now (bswap64 uses
bswap32). Contribution of assembly versions of these are welcome.
Add byte-swapping of ext2fs metadata for big-endian systems.
Tested on i386 and sparc.
1997-10-09 15:42:19 +00:00
5e05593163
Implement DIOCGDEFLABEL.
1997-10-08 23:23:13 +00:00
bb2d22bde0
use common genassym.awk
1997-10-04 17:21:23 +00:00
c63931a407
use common genassym.awk
1997-10-04 17:14:07 +00:00
92a347c574
Copyright assigned to The NetBSD Foundation.
1997-10-04 09:38:47 +00:00
3996b53189
PR/4162: Chris Jones: make cleandir does not work properly; it does not
...
remove the object files and the .depend file in the kernel build directory.
1997-09-30 22:39:49 +00:00
d65a5e7fd2
Enter DDB on cntl-alt-esc (a'la i386).
1997-09-25 02:42:47 +00:00
ef86b9a61d
Fix a small oversight in last change.
1997-09-25 02:13:44 +00:00
0c2efd7025
Add a "scrollskip" member to wscons_emulfuncs (XXX even though it's not
...
a function) which specifies how many lines will be skipped when scrolling
up when the bottom of the screen is reached. Dumb framebuffers skip 10
lines (as before) because the copies are s ... l ... o ... w, but it's
silly to skip 10 lines on VGA, since the copies are much faster, so we
only skip one in that case.
1997-09-25 01:31:53 +00:00
42c325e139
A minor barely acceptable hack to handle having a kernel boot on a system
...
with large amounts of memory and not spew. This doesn't really replace
fixing this problem better later, but it works for now. Basically, if memory
is greater than 128MB, start upping the sizes of some maps.
1997-09-23 23:23:23 +00:00
b23bbbb05c
Redo the platform specific identification and initialization, making
...
it more explicit where platform specific functions (like machine check
handling) should go.
1997-09-23 23:15:42 +00:00
03a798a3fd
Add some defines for alpha interrupt types.
1997-09-20 19:02:34 +00:00
185cbcebd0
An oops- MSS3 referred to a device not yet integrated.
1997-09-19 22:03:59 +00:00
4de790f125
Add in a clause ifdef'd for LIMITMEM- limit usage of memory to a certain
...
amount. Temporary until more drivers use busdma stuff.
Also correct to unsigned the printing out of memory sizes.
1997-09-19 22:00:34 +00:00
206b183a48
Add a config file for large memory 8200s- this is temporary until a
...
more gracious self correcting (for large memory, e.g., > 1GB) startup happens.
1997-09-19 21:58:47 +00:00
0fb787aedb
Add missing reference.
1997-09-19 14:48:59 +00:00
f3d890d1c9
missing cast.
1997-09-19 14:47:33 +00:00
d4713d24c2
Implement the kernel part of pr-1891. This allows for a more flexible sized
...
msgbuf. Note that old 'dmesg' and 'syslogd' binaries will continue running,
though old 'dmesg' binaries will output a few bytes of junk at the start of
the buffer, and will miss a few bytes at the end of the buffer.
1997-09-19 13:52:37 +00:00
618f6b9541
Make IDE work again, from Ross Harvey <ross@teraflop.com>.
1997-09-19 00:59:38 +00:00
9ce899230a
After decommisioning a mapping, an IMB kinda needs to happen.
1997-09-18 01:08:56 +00:00
cd69e27594
Prototype alpha_implver(), and fix a think-o in a previous commit.
1997-09-17 23:33:28 +00:00
b806d39316
Implement a stub for the "implver" instruction, which returns the
...
implementation version of the processor.
1997-09-17 23:32:14 +00:00
15e10104d5
Define the BWX-capable regions of the CIA chipset's address space (mem,
...
i/o, pci config space mode 0, pci config space mode 1) and the CIA
REV and CNFG CSRs.
1997-09-17 01:35:34 +00:00
879c4c5cf4
If the CIA revision is >= 2, read the CIA configuration register, and
...
remember its contents. Print out a bit of information about the chip,
including whether or not it supports the EV56 BWX instructions.
1997-09-17 01:34:18 +00:00
ed767a2402
Fix a typo in a comment.
1997-09-16 23:12:35 +00:00
87c1a08481
Add stubs for the Alpha Byte/Word Extension (BWX) instructions, present
...
on EV56 and later processors that have the "amask BWX" bit clear. These
instructions will be used to implement non-swizzle bus access functions
on newer systems, such as the new AlphaStation 500s with EV56 and 21172
PCI chipsets.
See "Alpha Architecture Handbook, Version 3", DEC order number EC-QD2KB-TE.
1997-09-16 23:09:10 +00:00
6fc0f07c30
Define the "integer miscellaneous" opcode and subfunctions.
1997-09-16 22:53:32 +00:00
149011c65b
Add support for disassembling the "integer miscellaneous" opcode subgroup.
1997-09-16 22:52:40 +00:00
718fb97e11
Support for the upcoming NetBSD/Amiga Hypercom driver family:
...
* support chip clocks != COM_FREQ, by introducing sc_frequency (for the
mainline code) and adding a frequency parameter right after the rate
parameter to comcnattach() and com_kgdb_attach().
- Make com_isa and com_multi initialize sc_frequency to COM_FREQ.
- Make i386/machdep.c and alpha/dec_xxx.c call com*attach() with the freq.
parameter.
* supio_attach_args get two more fields: a sc_ipl and a sc_arg, both ints.
- com_supio uses the first for interupt establishment (all childs will, as
soon as they exist) and the 2nd for sc_frequency.
- drsupio passes sc_ipl alway as 5, and for the "com"s, sc_arg as 16*115200
- hyper will pass sc_ipl as 6, and sc_arg as 16 * 460800
1997-09-16 20:34:23 +00:00
d1b4b49231
- Use PALcode ops names defined in <machine/pal.h>.
...
- Fix a few bugs in the software single-stepping support code, where
VMS PALcode ops were being checked, rather than OSF/1 PALcode ops,
causing erroneous results in the "exception return" and "unconditional
branch" predicates.
- Add the BWX instructions ("ldbu", "ldwu", "stb", "stw") to the
"load" and "store" predicates.
1997-09-16 19:07:19 +00:00
a14bab3438
Don't define another copy of the PALcode ops here; direct readers to
...
<machine/pal.h>.
1997-09-16 19:03:22 +00:00
e7c2d59885
Fix an oversight in the last commit.
1997-09-16 19:02:13 +00:00
0599db7897
- Define bits used in the "amask" instruction.
...
- Define processor family IDs returned by the "implver" instruction.
- Prototype alpha_amask().
1997-09-16 06:57:12 +00:00
9faf00ea6a
Implement alpha_amask(), a stub which reads the "architecture feature mask"
...
using the "amask" instruction.
1997-09-16 06:54:01 +00:00
4fe999c6bf
- Add the "amask" and "implver" operate subfunctions.
...
- Add the "ldbu", "ldwu", "stb", and "stw" major opcodes (BWX instructions).
1997-09-16 06:52:48 +00:00
fc80b40481
- Rewrite the functions that provide opcode subfunction names to make it
...
easier to add instructions that the disassembler doesn't know about
(the opcode subfunction number is now printed).
- Add the "amask" and "implver" operate subfunctions.
- Add the "ldbu", "ldwu", "stb", and "stw" major opcodes (BWX instructions).
1997-09-16 06:52:16 +00:00
d1fbc82e28
From page 6-9 of "Alpha AXP Architecture Reference Manual, Second Edition":
...
An IMB intruction must be executed after software or I/O devices
write into the instruction stream or modify the instruction
stream virtual address mapping, and before the new value is
fetched as an instruction.
We were missing calls to IMB after mappings were changed, which caused
systems with large I-caches (e.g. my AlphaStation 500) to fail miserably
when mapping in new pages of program text, or when context switching
(I couldn't even get the shell from init!).
1997-09-16 01:52:00 +00:00
37b8edbeac
In addition to MAS_ABT, check TAR_ABT when doing configuration space
...
reads. This is necessary because of newer AlphaStation firmware doing
the Wrong Thing with target aborts behind PCI-PCI bridges, much like they
do the Wrong Thing with master aborts. Reported by Matthias Drochner.
1997-09-15 23:31:15 +00:00
12f6c5aba1
Make sure to clear MAS_ABT if we received one.
1997-09-15 23:01:29 +00:00
3c3c6a3b31
Use the symbolic name for "received master abort".
1997-09-15 22:35:54 +00:00
8ff22715e8
Define bits in the CIA_ERR register.
1997-09-15 22:34:38 +00:00
e97c5f6c50
Update the model string for current reality.
1997-09-13 10:09:39 +00:00
9a5f8236b5
Don't panic if we receive a Processor Correctable Error or a System
...
Correctable Error; report them, instead.
XXX Need a platform-specific machine check handler so we can decode the
logout area on such errors.
1997-09-13 10:01:33 +00:00
12b0c2a20a
The Alpha console uses BOOTP for network booting, so the NetBSD kernel
...
should, too. Enable the BOOTP support in nfs_boot().
1997-09-13 07:42:01 +00:00
f784e8dc15
Apparently, new AlphaStation 500/600 firmware has the same problem with
...
PCI master aborts as eb164 firmware, so use the same workaround mechanism
on all system types (clear error register's master abort bit, and check
it after accessing configuration space), not just eb164's.
This also fixes a bug on eb164's - when making the Alpha port compile
again, I made an error that caused this to not be used on eb164 systems,
either. Thanks to Matt Jacob for pointing out this goof.
1997-09-13 05:58:07 +00:00
16a8787248
Fix execve(2) and *setregs() interfaces so emulations can set registers in a
...
more correct way. (See tech-kern.)
1997-09-11 23:01:44 +00:00
969e506de4
Oops, last change made "make depend" work incompletely. Don't define
...
a "depend" rule here.
1997-09-06 14:26:47 +00:00
281398581a
-Wall fixes
1997-09-06 14:08:27 +00:00
3b191b29c0
enable -Wall
1997-09-06 14:07:57 +00:00
be8a78e9b5
-use DHCP extensions in bootp()
...
-enable -Wall
1997-09-06 14:06:53 +00:00
80d9738db8
-Wall fixes
1997-09-06 14:03:55 +00:00
d99aa8efc0
Collect prototypes here.
1997-09-06 14:02:51 +00:00
7546d66094
Make sure the <machine/*.h> includes come from current kernel sources,
...
not from installed userland.
1997-09-06 14:02:13 +00:00
ed2ec4869c
Update for Chris Demetriou's changes made to the bus.h interface:
...
- bus_space_copy -> bus_space_copy_region (for consistency)
- "cacheable" argument becomes a "flags" argument instead, with
BUS_SPACE_MAP_CACHEABLE and BUS_SPACE_MAP_LINEAR flags currently
defined.
1997-09-06 05:44:07 +00:00
1aa35e94d4
s/BUS_BARRIER/BUS_SPACE_BARRIER/g
1997-09-06 05:21:14 +00:00
613ee19c60
Add DDB.
1997-09-06 02:04:18 +00:00
1f6a8f7d03
Enable DDB.
1997-09-06 02:03:32 +00:00
66fdddf6aa
Add DDB files.
1997-09-06 02:03:11 +00:00
9dcf694bd2
Prototype db_register_value().
1997-09-06 02:02:25 +00:00
998d79d26a
Add support for DDB (in-kernel debugger) to NetBSD/alpha, based on
...
such code for Mach 3's Alpha port. Initially reworked for NetBSD/alpha
by Chris Demetriou, and then heavily hacked on by me. Works, but is still
a little rough around the edges. Known problems:
- Error recovery could be improved a bit.
- Back traces don't work.
- Single-stepping can be flaky, at times. (Alpha doesn't have hardware
support for single-stepping, and I'm not entirely convinced the
MI DDB software-emulated single-stepping logic is 100% correct.)
- Logic for when to drop into DDB needs some improvement.
1997-09-06 02:00:48 +00:00
36f209b762
Split off PALcode functions into their own header file.
1997-09-06 01:23:52 +00:00
7df7a43ce7
When loading a symbol section, make sure it is aligned.
1997-09-05 21:50:34 +00:00
ba8becebfc
installbood_cd9660 no longer exists.
1997-09-05 20:20:17 +00:00
2f657a6266
Add some debugging code to log sgmap activities. Also, make sure that
...
we return "no valid mappings" if there is an error while loading the
sgmap.
1997-09-05 02:21:49 +00:00
2ecccdc05f
Define Status 0 and Status 1 registers.
1997-09-05 02:14:31 +00:00
55800b610a
Implement bus_dmamem_mmap().
1997-09-05 02:05:37 +00:00
6f4f08b8b2
Add a few more PALcode operations, as documented in pages (II-B) 2-1 through
...
(II-B) 2-33 of the Alpha AXP Architecture Reference Manual, Second Edition:
* rdps - Read Processor Status, needed by spl* functions.
* cflush - Cache Flush
* rdval - Read System Value
* wripir - Write Interprocessor Interrupt Request
* wrval - Write System Value
cflush, rdval, wripir, and wrval are used in multi-processor environments.
1997-09-03 23:09:04 +00:00
032358ab33
From hp300 pmap: use mycroft's pv_entry allocator (from i386 port).
1997-09-03 19:07:32 +00:00
f03ded039c
Update from hp300 pmap: define an active_user_pmap() macro and use it.
1997-09-03 00:58:13 +00:00
0f5f0e115a
Define a cdev_satlink_init(). XXX This should be done in an MI header file.
1997-09-03 00:25:01 +00:00
6cf58542f9
PMAP_{,DE}ACTIVATE() are no longer exported from the Utah-derived pmap.
1997-09-02 23:52:55 +00:00
243aa23148
Add __KERNEL_RCSID() and definitions for ISA satlink driver.
1997-09-02 23:41:04 +00:00
44e33a2f5f
Update for changes to how bus space tags are initialized.
1997-09-02 20:43:07 +00:00
90798596fe
Remove references to vm_pmap.
1997-09-02 20:37:23 +00:00
e7bb7bdc4b
Remove references to vm_pmap.
1997-09-02 20:11:24 +00:00
f203067ae3
Adjust for changes to bus space tag initialization.
1997-09-02 20:10:28 +00:00
a71cecbec3
Fix a typo.
1997-09-02 20:08:02 +00:00
991f4ebc72
cia_bus_ -> cia_swiz_bus_
1997-09-02 20:07:20 +00:00
80e3db443f
Apply a change made to other PCI chipsets:
...
don't expect/provide pci_decompose_tag to be a MI, public function. It
wasn't intended to be to begin with, and uses of it (e.g. the one in the
'de' driver) are quite likely to be incorrect.
1997-09-02 20:05:28 +00:00
3735c7d1d7
Fix a think-o.
1997-09-02 19:39:15 +00:00
df1dcf81d0
Oops, missed one.
1997-09-02 19:18:20 +00:00
cc5eaab25b
More garbage-collection.
1997-09-02 19:16:32 +00:00
b2a8424bb5
Garbage-collect loadustp(); the functionality has moved to pmap.old.c
1997-09-02 19:07:22 +00:00
2c5c631b71
- Make the pmap_activate() and pmap_deactivate() interfaces consistent my
...
passing them a proc *, which encapsulates all of the information necessary
to activate an address space.
- Garbage-collect pmap->pm_stchanged; it's not really used for anything.
1997-09-02 19:06:13 +00:00
bf232f7a37
Make the pmap_activate() and pmap_deactivate() interfaces consistent my
...
passing them a proc *, which encapsulates all of the information necessary
to activate an address space.
1997-09-02 19:04:57 +00:00
a47a8a25d6
Adjust for an interface change in a not-NEW_PMAP case in cpu_fork().
1997-09-02 19:03:58 +00:00
f1373b949c
- Make the pmap_activate() and pmap_deactivate() interfaces consistent my
...
passing them a proc *, which encapsulates all of the information necessary
to activate an address space.
- Garbage-collect pmap->pm_stchanged; it's not really used for anything.
1997-09-02 19:00:53 +00:00
5042993a22
- Make the pmap_activate() and pmap_deactivate() interfaces consistent my
...
passing them a proc *, which encapsulates all of the information necessary
to activate an address space.
- Clean up some debugging code.
1997-09-02 18:59:02 +00:00
364d6a31a7
Adjust some NEW_PMAP code for a slight interface change.
1997-09-02 18:54:28 +00:00
511e46c568
Clean up the context switching code a bit:
...
- Marco-ize the 3 instructions that actually switch to the new process
context.
- Unify (except for the pmap_deactivate() call) the NEW_PMAP and not-NEW_PMAP
versions of cpu_switch(), and clean up some comments.
- Tidy up the not-NEW_PMAP bits of switch_exit().
1997-09-02 18:53:26 +00:00
d316987784
Garbage-collect VM_PMAP_STPTE, USTP_OFFSET, VM_PMAP. Define VM_MAP_PMAP
...
instead.
1997-09-02 18:48:58 +00:00
b7b3955ce0
Fix a typo: ALPHA_PTE_WRITE needs to include the "user write" bit.
1997-09-02 14:29:37 +00:00
6caf625430
Note that a2 and a3 contain bootinfo information passed from the boot
...
program to alpha_init().
1997-09-02 14:29:00 +00:00
d95ac139e0
Oops, wrap cpu_decl()s inside #ifdef _KERNEL/#endif.
1997-09-02 14:25:34 +00:00
8b6e894364
Clean this up a bit; defopt has rendered the #undef hacks unnecessary.
...
Also, put the cpu_decl()s in cpuconf.h, so that platform support files
can pull in the prototypes from there, and pull in options for those
systems for which there is code in the source tree.
1997-09-02 14:19:29 +00:00
b7c1c1e321
Pull in alpha/cpuconf.c
1997-09-02 14:06:02 +00:00
5c72d6a933
Garbage-collect.
1997-09-02 14:03:10 +00:00
e79009b830
Ressurect from the Attic.
1997-09-02 14:00:11 +00:00
9db8b6018f
Make a note about option headers.
1997-09-02 13:42:49 +00:00
1df0782d87
Pull in DEC_3000_300 and DEC_3000_500 options.
1997-09-02 13:29:17 +00:00
a4cef84ac7
Pull in DEC_3000_300 option.
1997-09-02 13:26:42 +00:00
529d790161
Pull in DEC_AXPPCI_33 option.
1997-09-02 13:25:36 +00:00
cb32cf1ece
Pull in DEC_EB164 and DEC_KN20AA options.
1997-09-02 13:24:48 +00:00
b57ee951d0
Pull in DEC_2100_A50 and DEC_EB64PLUS options.
1997-09-02 13:23:56 +00:00
49a2bcd443
Pull in FIX_UNALIGNED_VAX_FP option.
1997-09-02 13:22:53 +00:00
693b3e7262
Nuke the idea of <machine/options.h>. It completely defeats the purpose
...
of fine-grain option dependencies.
1997-09-02 13:17:47 +00:00
e234ed15b6
Fix oversight in a previous commit.
1997-09-02 12:54:27 +00:00
375ad27ed8
- Garbage-collect all DMA-related initialization, calling a separate
...
*_dma_init() function instead.
- Pass the appropriate bus dma tag to children.
1997-09-02 12:51:20 +00:00
3ac7ac6e63
Garbage-collect.
1997-09-02 12:43:22 +00:00
aa7a2876e6
Treat bus space tags more like pci chipset tags and bus dma tags: allocate
...
them statically within a chipset's state structure, and pass them to
the *_bus_{io,mem}_init() functions.
1997-09-02 12:40:18 +00:00
fd01db8b74
Use more complete #include directives when pulling in the chipdep
...
functions.
1997-09-02 11:09:51 +00:00
9199b6645b
Clean up RCS IDs.
1997-09-02 10:56:52 +00:00
d450130943
Adjust for new names for the PCI i/o and mem swizzle-style access
...
function files.
1997-09-02 10:43:27 +00:00
8f286ca7f3
Renamed to pci_swiz_bus_{io,mem}_chipdep.c by repository copy.
1997-09-02 10:39:15 +00:00
8998fa1198
Revive these files from the Attic.
1997-09-02 10:26:55 +00:00
3220411801
Define PAL_cflush, PAL_ipir, and PAL_OSF1_wrperfmon PALcode operations.
1997-08-29 23:17:37 +00:00
6f3bab1f59
Merge scsipi branch in the mainline. This add support for ATAPI devices
...
(currently only CD-ROM drives on i386). The sys/dev/scsipi system provides 2
busses to which devices can attach (scsibus and atapibus). This needed to
change some include files and structure names in the low level scsi drivers.
1997-08-27 11:22:52 +00:00
38f15737fd
Protect access to kmem_map with splimp()/splx(). From Chuck Cranor.
1997-08-25 21:17:48 +00:00
ce0a826c55
fix various bogons: copy SCSIVERBOSE option (still commented out) and ISA lc
...
driver to ALPHA. Also, sort them into their respective lists correctly,
rather than punting completely (SCSIVERBOSE), or mis-sorting(!) (lc).
1997-08-24 06:40:18 +00:00
1173f77359
fix spaces/tabs lossage: if we're going to do "options<space><tab>", be
...
consistent about it (fix it in all files)! Also, there's no point at all
in doing "file-system<space><tab>", so kill the spaces.
1997-08-24 06:37:12 +00:00
6ac7f6248f
add a before tab to SCSIVERBOSE
1997-08-23 19:16:06 +00:00
44224e6fd5
Adapt to serial console attachment changes.
1997-08-23 14:28:16 +00:00
dc91486be3
bootp vs. mop: don't clobber `netboot' flag.
1997-08-23 10:18:33 +00:00
fc2e81c6d5
lie to the compiler when doing mkdep so that it depends .s files correctly.
1997-08-22 06:37:17 +00:00
0e3c7b7f44
Commented out SCSIVERBOSE option; reference
1997-08-20 18:35:55 +00:00
332ad95e76
Change the MI audio driver so it attaches to the MD driver in the
...
normal way. This requires adding a line to the config files to
get audio to work again.
1997-08-19 23:49:33 +00:00
23d0cae1eb
It helps streaming performance substantially to enable bursts and more up hose
...
packets. It's not clear whether latency will be affected much. It could be.
However, for the time being, getting full rates out of HIPPI or SCSI are what
interests us at NASA, so we'll hew to this bias.
1997-08-16 01:18:30 +00:00
92995a3a9f
a minor bit of cleanup
1997-08-16 01:16:33 +00:00
ecd1b40ab3
Add some PCIA_CTL defines.
1997-08-16 01:14:32 +00:00
9d532f482c
don't forget to set hwrpbsize to zero explicitly
1997-08-13 20:49:56 +00:00
bf596ddb89
don't define __BUS_SPACE_COMPAT_OLDDEFS if it's already been defined
1997-08-13 02:53:03 +00:00
9b263847db
clean up RCS IDs
1997-08-12 06:08:21 +00:00
73596f5504
sort miata defs
1997-08-12 02:59:43 +00:00
5544e7e348
update for moved files, placeholder for miata flag header
1997-08-12 02:08:12 +00:00
0bc9a09170
cia_bus_* -> cia_swiz_bus_*
1997-08-12 00:58:01 +00:00
46d5a50540
rewire a few file dependencies for cleanliness
1997-08-12 00:46:11 +00:00
4b8f75045a
define a defopt for the miata systype
1997-08-12 00:04:14 +00:00
2d184c2262
clean up bootinfo v1 struct a bit: add a hwrpb size field (in a backward-
...
compatible way), and clean up the comments to make things a bit clearer.
1997-08-11 23:43:38 +00:00
b38691223e
s/bogus/unknown/; just because we don't know about it doesn't mean it's wrong
1997-08-11 22:46:37 +00:00
48aa5a6912
Add lc* line for DEC EtherWORKS III (it was written initially for a
...
NetBSD/alpha user).
1997-07-31 22:22:08 +00:00
bd3cab1531
fix comment glitch in the last change
1997-07-25 07:01:42 +00:00
d86134ca68
fill in the new pointers in the bootinfo_v1 structure.
1997-07-25 07:00:42 +00:00
395f4bac6b
clean up bootinfo structure comments so they're more readable (to me,
...
at least 8-). Add structure offssets for structure members, so we
know how much space we're using. Make the version in the bootinfo
structure be a u_long, so there's no implicit padding in the structure.
Add a few more pointers to the bootinfo v1 structure, which will all
be set to NULL for now.
1997-07-25 06:59:47 +00:00
8e341ad358
If loading an Elf kernel, load the symbol table immediately after
...
the kernel image.
1997-07-25 00:09:01 +00:00
f65454b2a6
Set up a version 1 bootinfo for the kernel.
1997-07-25 00:07:56 +00:00
f56c3c315f
More DDB support:
...
- Add support for software single-stepping (Alpha does not have hardware
support for single-stepping)
- Alpha uses Elf64 symbols.
1997-07-25 00:06:25 +00:00
08d4c7e688
Update alpha_init() prototype; takes two more args.
1997-07-25 00:04:36 +00:00
264f1c5acc
Define the bootinfo magic number and bootinfo (version 1) structure.
1997-07-25 00:03:47 +00:00
4d01f6fbee
Add some DDB glue:
...
- Allow BUGCHK and BPT instruction faults in kernel mode if DDB is enabled,
since they are used to invoke the debugger.
- Add a comment about how we'd like to invoke DDB on a trap panic condition,
in a perfect world.
1997-07-24 23:55:01 +00:00
020d0208d7
- Two additional arguments to alpha_init(): bootinfo magic number, and
...
pointer to boot program's bootinfo structure. If the bootinfo magic
matches, save a copy of the bootinfo structure, and use it to determine
booted kernel name, the boot flags, and the location of the kernel symbol
table. If the magic number does not match, revert to the old method
of finding this information (sans symbol table info).
- Add some additonal DDB glue.
1997-07-24 23:52:10 +00:00
cfe8f450c7
update these to use the new 'correct' names for functions/constants
...
in bus.h.
1997-07-23 08:05:36 +00:00
9fae9984b0
remove a couple of outdated comments (pointed out by Kenneth Stailey
1997-07-23 07:56:05 +00:00
28b1691f4d
when i was documenting the bus_space interfaces (the document
...
was sent to developers, but will eventually become a man page or
something), i noticed a few in various names:
(1) _map and _alloc should take a flags argument, rather than a
'cacheable' boolean.
(2) BUS_BARRIER_* flags should be BUS_SPACE_BARRIER_*.
(3) bus_space_copy_* should be bus_space_copy_region_* for consistency
with other region ops.
Fix all of these (in a backward-compatible way, at least for now). Redefine
internal usees of those names to use the new names. Also, while at it,
clean up the copy functions (remove unnecessary variables) and make sure
that they and other functions conform to the spec.
1997-07-23 07:47:51 +00:00
391589011c
note differences in symbol names between ports (underscores). Also,
...
don't assume that the names/values to be put into defines in assym.h
start with the first .ascii in the assembler file; look for the array
start symbol, instead.
1997-07-23 07:06:59 +00:00
306cb0bd7e
clean up RCS id. also, use __RCSID rather than __KERNEL_RCSID, since
...
this file isn't actually compiled into the kernel.
1997-07-23 06:23:14 +00:00
ee60040e78
clean up rcs id
1997-07-23 06:21:57 +00:00
7d9e8102ad
Use new <dev/dec/clockvar.h> and and <dev/dec/mcclokvar.h>.
...
Garbage-collect original headers from sys/arch/alpha.
1997-07-22 18:50:52 +00:00
bdb232d2b6
Don't use <lib/libsa/if_ether.h> anymore. This was a copy of the
...
old (before ARP changes) <netinet/if_ether.h>, intended for
temporary use.
1997-07-22 17:41:01 +00:00
064c4e515c
Create sys/dev/dec and cleanup sys/dev/tc:
...
* Move clockvar.h (header file for generic clock code) to sys/dev/dec.
* Move if_le_dec.c with DEC padded LANCE-dma (pmax/pmax, ioasic, vax 3400)
to sys/dev/dec. Remove from sys/dev/tc.
* Declare attribute le_dec_subr in /sys/dev/dec/files.dec,
use if_le_dec.c when it's defined.
* Move IOCTL asic declaration from pmax and Alpha MD machine
files to sys/dev/tc/files.tc.
* move TurboChannel and ioasic if_le attachments from pmax and Alpha machine
config files to /sys/dev/tc/files.tc. Add le_dec_subr attribute.
* Add if_le_dec attribute to if_le_ibus (pmax ds3100 pmax) LANCE attachment.
1997-07-22 04:32:13 +00:00
5579e9d3bd
* move COPTS out of the 'program variables' section of the makefile and
...
into the 'argument variables' section.
* define variables for CPP and SIZE, defaulting to cpp and size, respectively.
* kill HOSTED_C*, since it's no longer used.
* use ${SIZE} rather than using 'size' directly, so it can be overridden for
cross-builds.
* generate assym.h via assym.s and an awk script.
1997-07-19 10:12:13 +00:00
75b9c1bce1
convert to use a genassym.c that produces awk-able assembler output, a
...
la the sun3 port. This makes cross-compilation easier.
1997-07-19 10:02:53 +00:00
429a941288
don't expect/provide pci_decompose_tag to be a MI, public function. It
...
wasn't intended to be to begin with, and uses of it (e.g. the one in the
'de' driver) are quite likely to be incorrect.
1997-07-19 09:49:39 +00:00
866bc1b267
sync with dev/isa/wd.c rev. 1.162:
...
>date: 1997/07/18 00:26:22; author: fvdl; state: Exp; lines: +10 -10
>Work around possible race condition with 2 drives on one controller
>in wd_get_parms. PR 3773, from Onno van der Linden (onno@simplex.nl )
S: ----------------------------------------------------------------------
1997-07-19 06:39:22 +00:00
7a8a1f3f1a
Turn the extern declaration of __flt_rounds() into a proper prototype.
1997-07-17 21:36:03 +00:00
ca1bba150a
use locator defines in "locators.h" to index cf_loc[]
1997-07-17 03:16:39 +00:00
320892f8db
oops, WSCONSCF_CONSOLE should be WSCONSDEVCF_CONSOLE
1997-07-17 01:33:04 +00:00
594536a71f
use locator defines in "locators.h" to index cf_loc[]
1997-07-17 01:28:54 +00:00
37f9c6bd88
use locator defines in "locators.h" to index cf_loc[]
1997-07-17 01:17:45 +00:00
6d4fa106d1
Move satlink0 to ALPHA.
1997-07-13 21:24:14 +00:00
16371837ec
Satellite receiver driver for ISA cards from PlanetConnect by Jason and
...
Herb for Canada Connect Corp.
1997-07-13 19:32:00 +00:00
eb51f51303
Convert spaces to tabs following option declarations
1997-07-10 20:46:37 +00:00
fce829ca4b
mark prototypes for static inline functions as possibly unused
...
(with __attribute__ ((unused))), to avoid generating warnings when
compiling without optimization but with the default warning flags.
1997-07-07 20:37:34 +00:00
ff21c8f511
Turn of 'unclaimed interrupt' messages- we know about them already- we can't
...
really fix this as yet.
1997-06-24 18:08:59 +00:00
84166e5151
foosize()'s return value is in DEV_BSIZE units; adjust the size obtained
...
from the disklabel accordingly.
1997-06-24 00:28:36 +00:00
f66658c8e0
move man pages into share/man.
1997-06-22 05:05:17 +00:00
ecada6375b
bzero() wants pointers, not ints, for its first arg.
1997-06-20 07:06:43 +00:00
fe15d6603a
Remove spurious line left over in previous commit.
...
Also, use parentheses like in <dev/isa/wd.c>
1997-06-18 22:25:53 +00:00
f5bf0d3701
wdsize(): only call wdopen()/wdclose() if not already open, per the
...
current `openmask'.
1997-06-18 20:39:55 +00:00
dacadc3aff
Add the ext2fs file system.
1997-06-13 00:44:13 +00:00
1258c8d25b
remove now obsolete "swap on..." lines.
1997-06-12 18:41:58 +00:00
552af779d2
bring mrg-vm-swap2 onto mainilne.
1997-06-12 15:46:19 +00:00
dc6a98e92c
bring mrg-vm-swap2 onto mainilne.
1997-06-12 15:09:23 +00:00
thorpej