Include <ddb/db_access.h> for db_read_bytes etc prototypes.
Add prototype for db_trapper().
Move prototypes for "machine" subcommands to db_machdep.h.
db_machdep.h:
Add prototypes for "machine" subcommands.
build features (such as ross's DEBUGLIST) can easily be applied to all
ports. This should reduce the complexity of each port's kernel
Makefile considerably. Line counts:
227 arch/i386/conf/Makefile.i386.orig
98 arch/i386/conf/Makefile.i386
227 arch/alpha/conf/Makefile.alpha.orig
99 arch/alpha/conf/Makefile.alpha
219 arch/sparc/conf/Makefile.sparc.orig
102 arch/sparc/conf/Makefile.sparc
215 arch/vax/conf/Makefile.vax.orig
102 arch/vax/conf/Makefile.vax
253 conf/Makefile.kern.inc
Roll i386, alpha, sparc, and vax over to the new build machinery.
this insn is available only on ARM arch v3 and later (and 2a). We
don't expect to be using these ops in the kernel on processors too
old to have SWP, and for userland uses (in e.g. a pthread library),
the kernel will simply have to trap and emulate the insn (it needs
to be "atomic", so a kernel trap of some sort will be necessary on
such platforms anyway).
the expensive checks are skipped when (!DEBUG&&!PMAPCHECK) and all of the
light-weigth checks are skipped when (!DIAGNOSTIC&&!DEBUG&&!PMAPCHECK).
This bring pmap.o's text down from 21KB (with PMAPCHECK) to 18.5KB (DEBUG)
to 16KB text (!DIAGNOSTIC).
the Branch Target Buffer of the BPRD bit changes.
* Enable Branch Prediction on the XScale by default.
* Don't invalidate the Branch Target Buffer explicitly. the i80200
manual (section 5.1, Branch Target Buffer Operation) notes that
manual software management of the BTB is unnecessary; it is flushed
implicitly when:
* processor resets
* FCSE process ID is written
* I-cache is invalidated
* sa110_cache_purgeD() is the same as sa110_cache_cleanD() on the
SA-1 -- make it an alias.
* sa110_cache_syncI() and sa110_cache_purgeID() are identical to
sa110_cache_cleanD() on the SA-1, with the exception that the
I-cache must also be flushed. Save code duplication by moving
the I-cache flush before the D-cache clean and letting it fall
through.
with the option USE_KERNEL_RCSIDS. (On a.out, these strings are actually
allocated memory and loaded; on ELF, they exist in a non-loaded file section.)
This is a followup to PR/14558.
- itimerfix(9) limited the number of seconds to 100M, before I changed
it to 1000M for PR/14558.
- nanosleep(2) documents a limit of 1000M seconds.
- setitimer(2), select(2), and other library functions that indirectly
use setitimer(2) for example alarm(3) don't specify a limit.
So it only seems appropriate that any positive number of seconds in
struct timeval should be accepted by any code that uses itimerfix(9)
directly, except nanosleep(2) which should check for 1000M seconds
manually. This changes makes the manual pages of select(2), nanosleep(2),
setitimer(2), and alarm(3) consistent with the code.
the platform supplies a clkread function that does something other than
return 0 (which is the default unless overridden by the platorm code).
Supply such a function for the IP22; even if it isn't perfect, it goes
a long way to making ntp usable.
While I'm at it, move the ticks-per-hz variable out of the struct platform
since it's really private to the per-platform interrupt/clock code.
XXX: No clkread function supplied for IP32, since it has other problems --
like a hardcoded ticks-per-hz, but the same code as on the IP22 could be
used.
* Define a CPWAIT macro as described in the i80200 manual and use it,
rather than replicating the code in a few places.
* The i80200 manual notes that the line-allocate operation used to
do global D$ clean does not actually perform a load/fill request
from external memory, and thus does not actually place valid data
in the cache lines allocated. Require that machine-dependent code
allocate an appropriately-sized chunk of unmapped VA space for the
global clean operation in order to avoid unpredictable results.
* The i80200 manual notes that the VA range for the Mini-Data global
clean (which *must* be mapped to physical memory) must be reserved
exclusively for cleaning the Mini-Data cache. Require that machine-
dependent code allocate an appropriately-sized chunk of memory for
this purpose.
pages, we use the standard (4K) page size as PAGE_SIZE. Make the
PAGE_SIZE related variables compile-time constants that reflect this.
Results in a bit over 2K worth of .text savings, and visibly better
code in the places that use PAGE_SIZE, etc.
Nereid is the board of ethernet/USB/memory for X68k
developed by X-PowerStation, a japanese X68k circle.
See http://xps.jp/ but only written in japanese.
and fix one spelling nit.
Mostly from port-hp300/8824, which had already pointed out
y2k (and y2k+1) bugs before 2000, but they were not fixed
till the last month. (I noticed this PR today. Oops)
use the file system time. (My iMac seems to give 1904 as the year very
often (dead battery?), and setting the correct date with ntpdate doesn't
seem to work.)
due to its similarities.
Patch has been tested by many people on the sgimips list for some time with
no complaints.
Contributed by: Christopher SEKIYA <wileyc@rezrov.net>
- Full support for SCSI-2 Tagged commands (enabled by default)
- Implement save and restore datapointer messages
- Formalize interface between MI and MD drivers.
- decouple interface between MD driver and DMA routines
- Use scsipi layer where appropriate (Tags, Sync Negotiations etc)
- control blocks stored using kernel pool(9) functions
- evcnt(9) compliant counters
- Enable advanced features on later WD33c93 chips.
(Identify message out phase is hardware assisted)
- Improved timeout support (one per active control block)
- Improved MESG_IN and MESG_OUT handling
- Start to tidy up debugging output
- Numerous bug fixes and cleanups throughout
Changes are based largely on the NCR53c9x MI driver for ideas on
how to DTRT.
DMA via the Secondary Inbound window, for now. Will probably
need to revisit this at some point.
Require that the board-specific i80312 front-end slice off a
subregion for the memory controller before calling i80312_attach(),
and fix a bug in the IQ80310 front-end that caused the Secondary
Inbound window to be configured incorrectly.
While I'm here, bump RAWFS_BSIZE up to 8192 since the installation
instructions use "bs=8k oconv=sync". My Archive Viper now streams
nicely while booting.
have firmware that understands ELF. We're usually stuck with S-Records.
To make life easier, attempt to stuff kernel symbols into the image
with dbsym(8).
If the kernel doesn't have SYMTAB_SPACE, or if the SYMTAB_SPACE is too
small, the kernel build continues as normal; this is just a convenience
measure.
On platforms which load the kernel sans symbols directly from firmware
(possibly in e.g. S-Record format), call ddb_init() with empty arguments,
so that it will search any compiled in SYMTAB_SPACE. On all other platforms,
if __ELF__, also call ddb_init() with empty arguments until ELF bootloaders
which pass symbol information are ready.
lukem