24a48d8b87
Oops, back out some test 5500 stuff from previous commit - only RAMDISK
...
was meant to be changed.
1999-12-08 04:16:16 +00:00
3b874faeb3
Add newline to last line of file.
1999-12-08 04:12:15 +00:00
369211f9ca
We now need a 3MB miniroot.
1999-12-08 04:11:07 +00:00
09af3823bf
In dc_ds_consinit(), choose the address of the dc device based on
...
systype. Fixes lockup on 5000/200 - tested on 5000/200, 3100 and
5100.
1999-12-08 04:03:28 +00:00
f3867cd79f
Don't need to prototype consinit() - it's in systm.h.
1999-12-08 02:56:17 +00:00
1ff57633a7
- clear all intr status and show old status when attached.
1999-12-08 01:54:59 +00:00
0df4960b03
- PMUINT_ALL, PMUINT2_ALL.
...
- some registers.
1999-12-08 01:51:56 +00:00
781149bb12
Handle the case where PCI dense memory and PCI sparse memory don't
...
overlap; don't require allocation from the dense extent if the PCI
memory address isn't mapped into dense space.
Also, make sure to return an error if a liner mapping is requested
and dense space is not available (not just not requested).
1999-12-08 01:48:39 +00:00
2c24f58ba1
Vr41xx LED control register definitions.
1999-12-08 01:43:58 +00:00
c2f5cc273c
Don't use our own defines for SCCDEV or RCONSDEV - pull in
...
<pmax/pmax/cons.h> for these values.
1999-12-08 01:29:11 +00:00
9208af106d
Protect against multiple inclusion.
1999-12-08 01:20:12 +00:00
9beb275ae8
Oops, committed the wrong version of this file previously.
1999-12-08 00:35:43 +00:00
dcf49845cb
Remove one of two (different!) prototypes for dc_consinit(). dc_ds.c
...
now includes <pmax/dev/dc_cons.h> to get the correct prototype.
1999-12-08 00:13:33 +00:00
3742b697d5
Fix gaff in previous - need <kn230.h> and use _SYS_DZ0 not _SYS_DZ for
...
5100 console device.
1999-12-08 00:04:11 +00:00
33c520ace6
Regen.
1999-12-07 23:58:27 +00:00
0bd5e93b0e
Remove duplicate vop_balloc definition accidentally added in rev 1.21.
1999-12-07 23:57:49 +00:00
12ed1b07a3
Use KN230_SYS_* names for 5100 device addresses.
1999-12-07 23:23:19 +00:00
a4f30c3f19
Add entry for AlphaServer 2100 (Sable, Sable-Gamma).
1999-12-07 21:51:53 +00:00
fcf35a8417
Add options, files, etc. for the AlphaServer 2100 (Sable, Sable-Gamma).
...
Actual source files not yet committed. Very Soon.
1999-12-07 21:47:12 +00:00
25a665e643
Avoid a spurious warning when establishing a pulsed interrupt handler
...
on an IRQ which was marked "initially-pulsed".
1999-12-07 21:36:16 +00:00
4056ebc587
When doing a badaddr check, insert an extra `mb', which is highly magic
...
on some systems (due to quirky bus adapters).
1999-12-07 21:35:06 +00:00
17afd02c47
Regen.
1999-12-07 21:07:38 +00:00
7cbac78932
Add comments to describe the lookup parameters needed in the various
...
component name fragments passed into VOP calls.
1999-12-07 21:06:48 +00:00
388112cd09
Add nsphyter.
1999-12-07 19:38:54 +00:00
1488729b56
Update for reality.
1999-12-07 19:38:36 +00:00
28de1b15a4
Add tlp at cardbus, and nsphyter.
1999-12-07 19:37:40 +00:00
b67d4809ed
Add a driver for the National Semiconductor DP83843 `PHYTER' 10/100
...
Ethernet PHY.
1999-12-07 19:36:37 +00:00
ff4a32590d
When checking the SROM checksum, if the standard location fails, try
...
the new standard location (according to the SROM format update document
for the 21143). From Masanori Kanaoka.
1999-12-07 18:24:01 +00:00
dd4be4cdba
Fix iocorrect defines.
1999-12-07 17:53:04 +00:00
7dd8599060
supply power.
1999-12-07 17:37:21 +00:00
90c7b962a6
frame buffer device support.
1999-12-07 17:25:00 +00:00
1bf65c154a
Supply power before attaching socket.
1999-12-07 17:23:54 +00:00
e96dc9806b
changing power up sequence.
...
disable all power before probing plum2 devices.
1999-12-07 17:21:45 +00:00
af18379afb
TX3922, tx39_poll_intr uses stop timer interrupt as sampling interrupt.
1999-12-07 17:11:05 +00:00
704572cafe
clean up boot message.
1999-12-07 17:08:10 +00:00
a9d982e4f4
synchronize various changes to comments between these files to make it
...
even more obvious that they're 90% identical and really ought to be
using common code in arch/powerpc for a most of this...
1999-12-07 16:11:48 +00:00
83f1c31647
Fix "FPCSR" to "FPSCR". ("Floating Point Status and Control Register")
1999-12-07 15:14:56 +00:00
f735cb83c3
- softdep functions are used outside of FFS. Why?
...
- ffs_bswap.c is currently unused by LFS.
1999-12-07 08:28:47 +00:00
546480874c
After reading the 21143 manual again, make sure SNOOZE is cleared in
...
the CFDA register, too.
1999-12-07 07:36:19 +00:00
6e36651a27
Add the 21143 PMCSR offset, from Masanori Kanaoka.
1999-12-07 07:33:25 +00:00
747d454ffe
Add the PMCSR offset for the 21143, and make sure to bring the 21142
...
and 21143 out of sleep mode. From Masanori Kanaoka.
1999-12-07 07:32:58 +00:00
f773270d0d
If, on the 21143, we find that we don't have an ISV SROM, try reading
...
it again, with 8 address bits. 21143 Pass 4.1 has a larger SROM,
for storing the CIS when used in a CardBus application.
1999-12-07 07:20:17 +00:00
3d60aecdd7
Make sure to bring the chip out of sleep mode. From Masanori Kanaoka.
1999-12-07 07:11:49 +00:00
ac20942bc5
Some systems don't have dense space; don't require it.
1999-12-07 07:04:39 +00:00
2e7a822ef2
applied patch from pr port-next68k/8962 from Christian Limpach <chris@nice.ch>
...
"boot fails on machines which do not have 32M of memory"
1999-12-07 06:27:33 +00:00
51f4c69ad4
Clarify what appear to the untrained eye to be two magic constants (the
...
address shift and access size shift), and allow them to be overridden
by chip-specific code, if necessary.
1999-12-07 05:44:57 +00:00
c6dcc983e5
- fix typo.
...
- MINYEAR is 1999.
1999-12-07 05:02:01 +00:00
64ea52288d
cleanup a little..
1999-12-07 04:54:54 +00:00
bd19af5aad
Nuke what's left of the DFSTRACE stuff.
1999-12-07 02:54:08 +00:00
e65f9b7c87
More cleanup. DKUSAGE (what little was left of it) goes bye-bye.
1999-12-07 02:40:27 +00:00
a38b721e5f
Nuke the last few bits of RF_DEBUG_ATOMIC that should have
...
disappeared a while back.
1999-12-07 02:13:28 +00:00
8111aaeef9
Cosmetics and a couple of diagnostic messages.
1999-12-06 21:06:59 +00:00
0893832078
update for changed struct wsdisplay_accessops:show_screen signature.
...
no functional changes
1999-12-06 19:25:56 +00:00
162086b1cd
do the screen switch asynchronously (via timeout(0)) if possible,
...
this hopefully helps for the (very rare) display corruption reported
in PR kern/8628
1999-12-06 18:54:50 +00:00
8996199a85
-allow the "show_screen" call to the display driver to complete
...
asynchronously, in the same style like the process attach/detach functions
-intercept the "cnpollc" call which originally went directly to the
keyboard driver and keep track whether the console is in "polling" state
(DDB!)
-pass a NULL callback to the screen switcher and the process attach/detach
functions if the console is "polling", to tell them that asynchronous
completion is forbidden
1999-12-06 18:52:23 +00:00
c9457413cb
Implement an allocator for VA-space using fixed extent maps. It is now
...
possible to allocate VA-space before uvm is initialized.
1999-12-06 16:06:24 +00:00
b6e2a143e4
Allocate the physical RAM from the extent map.
1999-12-06 15:34:42 +00:00
31b6740b63
Add SCI interrupt mask/unmask code.
1999-12-06 14:10:49 +00:00
f3e001c3ac
Fix typo in 3max+ scc1 device declaration - console output on a serial
...
console 3max+ works again.
1999-12-06 11:52:36 +00:00
801b079e37
If the vga driver isn't present in the kernel and PCDISPLAY_SOFTCURSOR
...
is set, then pcdisplay_cursor() should disable the hardware cursor first
time it is called.
1999-12-06 10:04:50 +00:00
cd20e6eb44
Add fields found in new format ebsaboot structures.
1999-12-06 09:55:57 +00:00
8395acb6c9
Insert '\n'.
1999-12-06 06:58:30 +00:00
d87d33754e
Enable BUSERR interrupt before autoconfiguration.
1999-12-06 06:47:14 +00:00
b48a6bbd79
Allow the "install diskimag" label to be any size < 16MB, not just 4MB.
1999-12-06 02:53:50 +00:00
d5ed9dc998
Regen.
1999-12-05 21:26:36 +00:00
c65011886d
Fix incorrect system call number.
1999-12-05 21:25:36 +00:00
ea2517e20d
Add proper stub code to make emulation of Linux's pread(2) and pwrite(2)
...
work. Fixes PR kern/8945 by Dave Sainty.
1999-12-05 21:24:28 +00:00
fa517eaed3
regenerate
1999-12-05 20:09:17 +00:00
5a3161ddbc
add Epson EEN10B ethernet
1999-12-05 20:08:39 +00:00
9eea13a674
Mark exactly 3 uses of the SCR_BO() macro as being bogus; these 3 uses
...
already involve byte swapping on big-endian systems due to bus_space_*().
However, the use is self-consistent, and the value is not interpreted
by the chip, so it probably does not matter. Leave them in for now; we
can always look at their removal later.
1999-12-05 19:40:18 +00:00
8c1cbdbed5
Slight change to previous, to make it more obvious as to what's going on.
1999-12-05 19:33:13 +00:00
d06db4b7da
I have the feeling that OpenBSD has never tried the 53c825a, 53c875, 53c875j,
...
53c885, 53c895, or 53c896 on big-endian systems.
1999-12-05 18:40:46 +00:00
389c599f35
Changes from the OpenBSD `ncr' driver to byte-swap the script on big-endian
...
systems. Should make this go on e.g. the Apple Network Server.
1999-12-05 18:25:18 +00:00
60416909de
Oops. The compiler didn't catch this 'used before set'. Kudos
...
to Sean Doran for finding it and being nice in telling me.
1999-12-05 18:20:53 +00:00
0f8b4e4579
Revert order of formula to calculate the number of buffer pages if the
...
BUFCACHE option is defined. With the new formular a few pages less will
be used (22 on a system with 256MB) but we avoid a possible integer
overflow.
1999-12-05 17:12:43 +00:00
8b7af21483
Correct calculation of buffer pages if BUFCACHE is defined. Patch supplied
...
by kern/8954 by URA Hiroshi.
1999-12-05 15:53:37 +00:00
6cec6a5c90
Use dev/clock_subr.c.
1999-12-05 15:50:46 +00:00
63604fe51b
Add pseudo-device pty. sysinst does use ptys.
1999-12-05 15:40:17 +00:00
26e1b45757
clrnd()/clbase() discarding.
1999-12-05 11:56:30 +00:00
b6113c1d8c
delete clrnd() to compile again.
1999-12-05 03:31:11 +00:00
44ab379124
The length check for readdirplus entries wasn't right, causing troubles
...
with 32k readdir sizes. From FreeBSD.
1999-12-05 01:43:06 +00:00
5277c5e448
CL* clearout
1999-12-04 23:14:40 +00:00
9b847640c3
Add bound checks in emulation of kill(2). This fixes the last part of
...
PR kern/8904 by Dave Sainty.
1999-12-04 22:26:52 +00:00
96fdbb96a8
Add bound checks in emulation of sigaction(2). This fixes a part of
...
PR kern/8904 by Dave Sainty.
1999-12-04 22:21:12 +00:00
60e5eb1dd2
Fix typo in last commit.
1999-12-04 22:17:43 +00:00
f8a4b15b1c
Adapt to renamed system call argument.
1999-12-04 22:15:57 +00:00
a3dbb6bba5
Regen.
1999-12-04 22:14:52 +00:00
8b5f9298fa
Consistently call signal number arguments "signum".
1999-12-04 22:14:14 +00:00
f8df357a47
Add bound checks in emulation of signal(2) and return SIG_ERR on failure.
...
This fixes a part of PR kern/8904 by Dave Sainty.
1999-12-04 22:08:36 +00:00
5bc798bb82
Allow signal numbers upto 63 in clone(2) emulation.
1999-12-04 21:58:05 +00:00
9bf4ab219a
Correct signal array size.
1999-12-04 21:41:53 +00:00
cd4ab88255
Extend signal mapping array to 64 entries like in the i386 emulation.
1999-12-04 21:38:57 +00:00
fd58cf1b88
CL* discarding.
1999-12-04 21:36:00 +00:00
0513268399
CL* discarding.
1999-12-04 21:13:19 +00:00
d5e85e61cf
Fixes PR#8836. Some changes made by somebody else were a tad incomplete so
...
configuring w/o SIO broke compilation. I forget why, but there was at one
point (and may still be) a dependency between SIO and EISA. This change
just makes things compile sensibly again. It may make no sense to build
a kernel w/o sio in this case. I can't test this conveniently because I
haven't got a 4100 with a video card in it at the moment.
1999-12-04 20:29:02 +00:00
21574acbba
You can push power key to reboot when halt in vr_reboot.
1999-12-04 14:23:35 +00:00
c3026431e3
some cleanup:
...
-don't set capabilities at compile time
-since our accelerated putchar() doesn't underline, don't claim so
-remove bogus character range check - fonts are not limited to ASCII
-use rasops_unpack_attr() instead of relying on rasops internals
1999-12-04 14:01:56 +00:00
f0b63a4aa2
-use the right namespace for screen capabilities
...
-make attribute decomposing a bit more friendly if the caller doesn't
care about underlines
1999-12-04 13:57:35 +00:00
942f120fbf
Lay it out like the other fonts.
1999-12-04 13:40:21 +00:00
43e59084c4
- Stylistic cleanup.
...
- Make ifndef'ed out bits look less like a statement of intent.
1999-12-04 13:35:42 +00:00
385f993d38
CL* discarding.
1999-12-04 12:33:03 +00:00
6aabd4d0c2
CL* discarding.
1999-12-04 12:11:13 +00:00
b5c8739b96
Unify vr_reset and vr_powerdown.
1999-12-04 10:55:17 +00:00
8598795248
CL* discarding.
1999-12-04 10:55:11 +00:00
19a5b325f3
Print input/output/interrupt settings.
1999-12-04 10:15:34 +00:00
b8a6774e36
Add support for Lava Computers MFG 2sp-pci and quattro cards.
1999-12-04 05:43:44 +00:00
165dc789fb
Regen
1999-12-04 05:43:02 +00:00
fce37d6113
Add vendor ID for Lava Semiconductor ( http://www.lavalink.com )
1999-12-04 05:41:08 +00:00
111b1dc2ee
Regen.
1999-12-04 04:41:40 +00:00
ddbe03436b
Add some of the Compaq RAID controller IDs.
1999-12-04 04:40:57 +00:00
53ecdaee6c
Some queue related functions now use a u_int16_t. Turn some messages into
...
CFGPRINTF messages. Clear up the f/w download slightly. If less than
rev 5 2100 chip, turn off loop fairness. Clean up a botch or two.
1999-12-04 03:08:18 +00:00
5854be051d
Make sure we have a big enough buffer to sprintf into (noticed by
...
deraadt@openbsd.org ).
1999-12-04 03:06:54 +00:00
0f0fbfa802
Roll core version minor. Clean out some target mode stuff. Respecify some
...
queue related functions to take u_int16_t's. Restructure the softc a bit.
1999-12-04 03:06:05 +00:00
f5c2acedc2
(wow- I thought I'd already committed most of this).
...
Clean up some isp_attach time stuff- if ISP2100_FABRIC is defined try *really*
hard to make sure that we get the firmware state to FW_READY and see the
loop state where the Port Database is ready to be gathered- if we don't do
this it's unlikely we will be able to correctly query the nameserver because
we won't see that we're on a fabric.
Clean up the completely broken and stupid attempts to hot switch the
'slow' start routine out of the way. Sigh.
Turn speed announcements into CFGPRINTF functions (available only if DEBUG
defined).
1999-12-04 03:04:59 +00:00
e363023daf
Rearrange defines to make the file diff cleaner with OpenBSD. Change CFGPRINTF
...
and default verbose levels. Add in a forced compile in f/w define unless
either IS_DISABLE_FW or ISP_COMPILE_FW defined.
1999-12-04 02:59:29 +00:00
e6da5abb16
Add back in inclusion of microcode and rationalize it. request/response
...
queue indices need to be u_int16_t wide.
1999-12-04 02:56:30 +00:00
e5835e36c3
request/response queues now indexed via u_int16_t. Add back in f/w inclusion
...
and clean up it's compilation. get chip rev out of pci header.
1999-12-04 02:54:54 +00:00
adf3bfa79d
Fix file mode of pbsdboot.exe.
1999-12-04 02:43:48 +00:00
878fa4790f
Fix "make includes" since pckbc moved to dev/ic from dev/isa
...
(Hi, Jason!)
1999-12-04 02:16:24 +00:00
97cb535e46
change comment to mention that this driver also handles the '558 and '559
1999-12-04 02:02:30 +00:00
08d1d1b378
Actually, the 2100_A500 has 64 interrupts, not 16.
1999-12-04 00:22:54 +00:00
a63bfb3c6a
add atomic.h (missed by thorpej; approved by thorpej)
1999-12-04 00:18:15 +00:00
4560ac465a
Split the PC-like keyboard controller driver into chip back-end and
...
bus front-end.
1999-12-03 22:48:22 +00:00
eab9ce05b7
A PCI Revision ID of 0x02 is what ESS happens to be calling ES1946 Revision E.
1999-12-03 22:34:28 +00:00
04debef27a
add back firmware with BSD style copyright as approved by Qlogic
1999-12-03 21:48:49 +00:00
22979769c0
Handle the case of a vnode flush while dirops are active correctly in
...
lfs_segwrite. Also, make sure a flush is called in SET_DIROP before sleeping
on its results. Addresses PR #8863 .
1999-12-03 21:47:44 +00:00
184f8b2c39
First round of discarding the CL* macros.
1999-12-03 21:43:19 +00:00
d8719f61c9
Get ready for some needed flexibility; put the IRQs to use for each slot
...
in the softc.
1999-12-03 19:02:49 +00:00
cc0eadd619
Make pmap_main_lock a spin lock, not a sleep lock.
1999-12-03 18:49:37 +00:00
1917e12c8a
CS:CARD1/CARD2 8bit port support.
1999-12-03 18:15:41 +00:00
fe61f2db84
add ISP_DISABLE_FW defopt
1999-12-03 18:02:15 +00:00
816e27676c
s/ELF32_HDR_SIZE/sizeof (hdr)/
1999-12-03 15:44:41 +00:00
7a77d2bc71
add cast for pmap_extract().
1999-12-03 15:43:47 +00:00
04f70ed884
Add a flags variable to dc softc, and when attaching a dc determine
...
(via systype) whether or not it is possible for a keyboard and mouse
to be attached. The console on a 5100 now works!
1999-12-03 13:07:35 +00:00
54c58da2e5
The first order approximation of PMAGD SFB+ framebuffer. Proven not
...
working with 32bit PMAGD TURBOchannel option card (I got rainbow
colour virtical stripes on screen).
1999-12-03 09:50:53 +00:00
0aa48d5c55
New delay(), more carefully coded:
...
- Use explicit assembly; don't want the compiler optimizing things too
much here.
- Subtract 2 for each iteration of the loop, rather than 3. The loop
consists of only 2 instructions (even the C version compiled to a
loop of 2 instructions).
The latter change has squashed a fairly annoying timing bug in the
mii_bitbang module as used by the `ex' driver on my AlphaStation 500.
XXX delay() should maybe be rewritten again, to use the rpcc instruction.
1999-12-03 07:29:57 +00:00
fafcf62fd6
Update my main Alpha development machine's kernel config file to
...
reflect current reality.
1999-12-03 07:03:43 +00:00
19ada0968b
declare new malloc types for IPv6 router renumbering use.
...
(part of KAME sync to latest)
XXX reorder them to make IPv6 items together?
1999-12-03 04:52:05 +00:00
901e4b0219
Fix IOASIC DMA alignment problems. Buffers not aligned on doubleword (8
...
byte) boundaries don't work correctly. Make use of the SDR0/SDR1 registers
to adjust the buffer alignment when starting the DMA transfer. Block device
I/O done by the filesystems will usually be aligned correctly, but character
device I/O may not be aligned correctly. This should fix the problems with
dump(8) failing randomly on DECstations.
1999-12-03 04:26:17 +00:00
bed152a4e7
We don't support RF_DAG_TEST_ACCESS.
1999-12-03 03:35:30 +00:00
9991550466
Change debugging printf() so that it compiles if enabled.
1999-12-03 03:34:36 +00:00
128e2e90c5
Nuke some duplicate code.
1999-12-03 03:18:45 +00:00
a038f90588
Kernel memory is not to be wasted. If we're bailing out because of an error,
...
give any allocated memory back to the kernel so someone else can use it.
1999-12-03 03:06:44 +00:00
d782dfb5f7
Cleanup rambling codes.
1999-12-03 03:06:11 +00:00
6944e3acfe
Remove a now defunct file. Most of the contents were already displaced
...
by others.
1999-12-03 03:03:48 +00:00
ba72fb5211
Decouple DECstation binding, use 'dev/dec/mcclock_pad32.h' for
...
implementation consistency.
1999-12-03 02:56:37 +00:00
3888a71ad1
Move LIST_INIT() to a more appropriate place.
1999-12-03 02:43:22 +00:00
31f8115d20
Add _splrestore() to manipulate processor interrupt control bits.
1999-12-03 02:15:55 +00:00
a51be1961c
lock_machdep.c is gone.
1999-12-03 01:13:51 +00:00
5d0a62da53
Remove now-obsolete atomic operations.
1999-12-03 01:13:17 +00:00
2d8ef60c51
This file is obsolete.
1999-12-03 01:12:00 +00:00
2a97466824
Rewrite the atomic locking primitives using in-line assembly.
1999-12-03 01:11:34 +00:00
169af5c51b
Add a dummy read just after enabling receiver interrupt.
...
If the receiver already has datum, no further arrival of
data is possible and no interrupts will occur.
This change fixes problem that pressing key during boot
may sometimes disable the keyboard.
Remove unreferenced variable "in" in kbdcngetc().
1999-12-03 00:14:06 +00:00
d89260177d
In pmap_page_protect(), don't reference a pmap we're unlocking via
...
the PV entry we just freed (D'OH!)
1999-12-02 23:40:27 +00:00
a00a9ff012
Convert to use rasops/wsfont, enabling colors.
...
For now, only the "putchar" and "copyrows" accelerations are used.
1999-12-02 23:04:44 +00:00
5c69a4c489
-initialize the colormap completely at compile time, to allow drivers
...
to use it early
-now we can declare it "const" (as "rasops_isgray[]", while we are here)
-don't use the fg/bg colors in ...alloc_attr() if the WSATTR_WSCOLORS
flag was not given - use reasonable defaults instead
-add an opaque "ri_hw" member to "rasops_info", for driver use
1999-12-02 22:57:13 +00:00
9f7d189f05
Inline most of the remaining PALcode calls.
1999-12-02 22:08:04 +00:00
90bc415584
Pull in the BWX inlines. We expect the arch to be set appropriately for
...
the assembler before these files are pulled in by the chip-sepecific files.
1999-12-02 19:44:49 +00:00
4e08cc6996
CIA core logic with BWX enabled appears on EV6. We require at least
...
EV56 for the assembler to emit BWX opcodes, so set the arch to "ev6".
1999-12-02 19:43:58 +00:00
dc362cf369
CIA core logic with BWX enabled appears on both EV56 and PCA56. We
...
require at least EV56 for the assembler to emit BWX opcodes, so set
the arch to "ev56".
1999-12-02 19:43:25 +00:00
0a2ea99c42
Inline the BWX instructions.
1999-12-02 19:41:39 +00:00
8ccf786b08
remove nonrequired include file line (fb.h)
1999-12-02 18:50:54 +00:00
9bd4956230
BUSSPACEDEBUG -> BUS_SPACE_DEBUG
1999-12-02 18:41:56 +00:00
e5bc2ce76f
add support for 3c905b-Combo
1999-12-02 13:21:48 +00:00
262d9092fc
add media definition for 100baseTX
1999-12-02 13:20:56 +00:00
8789e60098
rcsid police
1999-12-02 07:18:44 +00:00
f9495b711c
fix comment (sync with KAME)
1999-12-02 05:25:59 +00:00
6df71cd35f
use _KERNEL instead of KERNEL. (sync from KAME)
1999-12-02 05:25:47 +00:00
522e6d0296
avoid namespace polution ("#ifdef KERNEL" was mistakingly used)
1999-12-02 05:08:16 +00:00
c31741ec4d
Do the "options<SPACE><TAB>" thing for some recent options.
1999-12-02 03:52:25 +00:00
4106b60175
Move atomic operations into <machine/atomic.h>, and make them in-line
...
assembly, rather than function calls.
...except alpha_atomic_testset_l(), which will go away completely once
I commit the new <machine/lock.h>.
1999-12-02 01:09:11 +00:00
02faf8d588
Done something half sensible if a USB console keyboard is unplugged instead
...
of panic()ing.
XXX Untested. I will test it the next time I can borrow an iMac.
1999-12-01 23:22:57 +00:00
b687c3c859
Some more DIAGNOSTIC.
1999-12-01 23:19:11 +00:00
13536cc3ec
Add longlong_t and u_longlong_t.
1999-12-01 18:27:08 +00:00
c258dfae2f
After reading the GCC `documentation' a little more, improve the inline
...
__asm() statements added previously for PALcode operations.
1999-12-01 18:23:11 +00:00
38e73c0c99
in uvm_page_physget(), try the vm_physmem[] chunks in the order of their
...
"free_list" attributes, to save DMA memory
1999-12-01 16:08:32 +00:00
229f631a84
regen
1999-12-01 15:08:17 +00:00
1657f687be
add Cyclades 4Y and 8Y
1999-12-01 15:07:44 +00:00
a9aba751e7
Make it compile even if there is no wsdisplay.
1999-12-01 11:41:46 +00:00
06276dc255
Fix wrong figures in comments.
1999-12-01 08:55:09 +00:00
f0771e6b9b
Arrange comment descriptions for internals of TC DECstations.
1999-12-01 08:41:41 +00:00
6aa5cbc76c
Replace old asic.c with one imported from a development branch.
1999-12-01 08:39:20 +00:00
b8997ad45a
Remove a file obsoluted and arrange global extern declarations.
1999-12-01 08:37:25 +00:00
1d71d327fc
Simply the way how 3min estimates CPU speed. Save 25+ instructions.
1999-12-01 08:35:27 +00:00
3328370469
Return the blocksize-rounded-up length (which was the size malloc()d
...
anyway). The resultant pwrite() is now a multiple of the blocksize and
doesn't fail on a pmax with the MI SCSI driver.
Problem noticed by Tohru Nishimura.
1999-12-01 05:02:03 +00:00
b15fcce56c
Use vertical nscheduling for bulk traffic. It improves bulk thruput a lot.
...
From FreeBSD and Nick Hibma.
1999-12-01 00:42:05 +00:00
66a51bd133
Quiet down the "excessive collision" messages w/ LEDEBUG. None of the other
...
Ethernet drivers really report this quite as loudly as this did.
1999-12-01 00:40:53 +00:00
12f7832ebc
don't need private `imb' inline anymore.
1999-11-30 22:32:08 +00:00
9314d7f4d7
Use ptoa() consistently when printing out how much memory we have, etc.
1999-11-30 19:31:56 +00:00
fd9aa8fbba
Cast the argument to ptoa() to a vaddr_t to prevent an integer overflow
...
from occurring on systems with more than 2G of RAM.
1999-11-30 19:31:05 +00:00
a7ee57948b
-support 3c905B-COMBO - somewhat preliminary: the chip has both an internal
...
MII PHY capable of NWAY (according to the Linux driver) and plain BNC/
transceiver connectors. The shared code can't handle this yet, so leave
out MII/NWAY for now.
-print out revision number from PCI config header, this has been useful to
identify buggy chips
1999-11-30 19:16:51 +00:00
9faac4111e
regen
1999-11-30 19:10:38 +00:00
b5db34e4d5
add 3c905B-COMBO
1999-11-30 19:09:54 +00:00
85afb0e66b
bicons_getc: calls vrkiu_getc() when vrkiu is configurated only.
1999-11-30 18:42:02 +00:00
63494b0b50
Avoid an integer overflow on systems w/ more than 2G of RAM.
1999-11-30 18:34:23 +00:00
69b252dfff
Put some (disabled) debugging code into pmap_steal_memory().
1999-11-30 18:18:02 +00:00
b226b8aa37
Increase packet counter before passing packets to BPF.
1999-11-30 17:02:39 +00:00
671919edee
add consistency check whether the end mark does appear before the
...
reported number of nodes
1999-11-30 15:54:55 +00:00
ab0574c601
activate "coma bug" workaround for 6x86MX too.
...
Closes PR port-i386/7538 by darkstar@pgh.net .
1999-11-30 15:22:52 +00:00
8b86f850f6
make platid_test compile again.
1999-11-30 15:11:00 +00:00
simonb