* dev/ic/ug.c (main code shared by the attachments)
* dev/isa/ug_isa.c (isa attachment)
* dev/acpi/ug_acpi.c (acpi attachment)
That means that ug(4) can now be attached via ACPI.
Thanks to Mihai Chelaru for the good work.
debugging and its main use is in device drivers. Its used there to signal
that the flagged buffer has a special meaning or should be handled
differently.
OK'd by Bill Sudenmund on tech-kern.
Patch by Slava Semushin <slava.semushin@gmail.com>
Again, this was tested by comparing obj files from a pristine and a patched
source tree against an i386/ALL kernel, and also for src/sbin/fsck_ffs,
src/sbin/fsdb and src/usr.sbin/makefs. Only changes in assert() line numbers
were detected in 'objdump -d' output.
the BIOS is reporting (and speedfan for windows).
* Simplify the code.
* Remove unused functions and unnecessary variables.
* Provide more rfact values for the voltage sensors (from OpenBSD).
* Remove the limit of 1.5 seconds for refreshing the sensors, it's
unnecessary... we can read it every time we want.
Now I'm happy with the driver (code and envstat output):
[juan@nocturno][~]> envstat -r
CPU Temp: 38.000 degC
System Temp: 36.000 degC
VCORE_A: 1.664 V
+3.3V: 3.312 V
+5V: 4.919 V
+12V: 12.480 V
VBAT: 3.248 V
CPU Fan: 3096 RPM
System Fan: 0 RPM
[juan@nocturno][~]>
It's actually fine to have them. Somehow I wish there was a way to express
that there can be only one device of that kind attaching on a given pcppi.
All of this is generic for all indirectly configured bus (i.e., specified
by kernel configuration).
Reported by uwe@.
name. Makes it more obvious what the problem is, and easier to spot
in the dmesg output after quiet boot warns about "errors" while
detecting hardware.
This allows us to convert aucom to just another com attachment, and cleanup
some code in the com_arbus.c.
Additionally, we use a common com_cleanup routine rather than having a
zillion copies of it in the attachment points.
This has been tested on a number architectures, and it has been shown to get
close to comparable performance when COM_REGMAP is defined, and comparable
when it is not defined.
Approved by core@. Fixes PR port-evbmips/32362.
Merge from chap-midi branch, after
~month for review
Comments by thorpej@ drochner@ and Alexandre Ratchov
Incorporated: points by thorpej@ drochner@; preliminary support for
a stats-collecting ioctl suggested by martin@ from comments by A.R.
PR kern/32441 kern/32442 kern/32567 kern/32588 kern/32694 kern/33590
kern/33614 and one instance of kern/32651
ok martin@
to the screen on which they are being called. The driver cannot guess
this by itself but it is needed to implement, at least, the getwschar and
putwschar functions in the correct place. There are no functional changes
yet.
Tested on i386 (vga, vga_raster, machfb, vesafb), macppc and sparc64.
Suggested and reviewed by macallan@.
machines, the keyboard controller will not pass this test, but if you
attach anyway, it works fine. Note that this test is specifically
disabled in ic/pckbc.c, but given that it seems to work fine on other
machines, leave it defaulted to on.
- initialize it properly in the bus front-ends (all 2, exept in wdc_pcmcia.c
for the "Sandisk CompactFlash Card" where it's set to 1)
- remplace hardcoded '2' by ata_channel->ch_ndrive in MI IDE drivers.
From Christos Zoulas in kern/32501.
- rather than embedding bufq_state in driver softc,
have a pointer to the former.
- move bufq related functions from kern/subr_disk.c to kern/subr_bufq.c.
- rename method to strategy for consistency.
- move some definitions which don't need to be exposed to the rest of kernel
from sys/bufq.h to sys/bufq_impl.h.
(is it better to move it to kern/ or somewhere?)
- fix some obvious breakage in dev/qbus/ts.c. (not tested)
explicitely by a plain integer array
the length in now known to all relevant parties, so this avoids
duplication of information, and we can allocate that thing in
drivers without hacks
userland interface (yet), basically just can detect a TS-DIO24 on a ISA
bus and provide an attachment for sub-devices.
The TS-DIO24 contains 24 programmable digital input/outputs.
be toggled in WE_MEM_{ENABLE|DISABLE} when receiving or transmitting packets.
Use this to switch the toggle off for MCA cards, since it causes NIC resets
there.
Fixes PR kern/26895 by Dave Barnes.
attimer(4) is the new body of the part of pcppi(4) that mapped the TIMER1
register to set the pitch of the bell. It was necessary to separate them
in order to have a working ACPI attachment (as the two appear as different
devices in the ACPI structures).
pcppi_attach(), which now accepts "struct pcppi_softc";
Split ISA specific bits from pcppi_attach() into pcppi_isa_attach()
(needed by the upcoming pcppi(4) ACPI attachment).
Reviewed by christos@.
everything "scsi_*", since we really are talking about the SCSI command
set, ATAPI transport not withstanding. Improve the names of many structures,
and prepend "SCSI_" onto all SCSI command opcodes. Place items described
by the SCSI Primary Commands document into scsi_spc.h.
audio framework
Summary of changes:
* struct audio_params
- remove sw_code, factor, factor_denom, hw_sample_rate,
hw_encoding ,hw_precision, and hw_channels. Conversion information
is conveyed by stream_filter_list_t.
- change the type of sample_rate: u_long -> u_int
- add `validbits,' which represents the valid data size in
precision bits. It is required in order to distinguish 24/32bit
from 24/24bit or 32/32bit.
* audio_hw_if
- add two parameters to set_params()
stream_filter_list_t *pfil, stream_filter_list *rfil
A HW driver should set filter recipes for requested formats
- constify audio_params parameters of trigger_output() and
trigger_input(). They represent audio formats for the hardware.
- make open() and close() optional
- add int (AUMODE_PLAY or AUMODE_RECORD) and audio_params_t parameters
to round_blocksize()
* sw_code is replaced with stream_filter_t.
stream_filer_t converts audio data in an input buffer and writes
into another output buffer unlike sw_code, which converts data in
single buffer.
converters in dev/auconv.c, dev/mulaw.c, dev/aurateconv.c,
dev/tc/bba.c, dev/ic/msm6258.c, and arch/arm/iomd/vidcaudio.c are
reimplemented as stream_filter_t
* MI audio
- audiosetinfo() builds filter pipelines from stream_filter_list_t
filled by audio_hw_if::set_params()
- audiosetinfo() returns with EINVAL if mmapped and set_params()
requests filters
- audio_write(), audio_pint(), and audio_rint() invoke a filter
pipeline.
- ioctl() for FIONREAD, AUDIO_WSEEK, AUDIO_GETIOFFS,
AUDIO_GETOOFFS, and audio_prinfo::{seek,samples} for
AUDIO_GETINFO handle values for a buffer nearest to userland.
* add `struct device *' parameter to ac97_attach()
* all of audio HW drivers follow audio_hw_if and ac97 changes
reviewed by christos@, cube@ and martin@.
While here, remove a printf() in mpu_attach() (ic/mpu.c) to remove
an empty line in some frontends (mpu_isa.c, etc).
by the isa.c bus driver and the "address/whatever not specified"
argument passed to leaf device drivers.
The former is "ISACF_XXX_DEFAULT" as generaterd by config(8), the latter
"ISA_UNKNOWN_XXX", defined in isavar.h.
This way we save a dependency of every ISA device driver on "locators.h".
which bustype should be attached with a specific call to config_found()
(from a "mainbus" or a bus bridge).
Do it for isa/eisa/mca and pci/agp for now. These buses all attach to
an mi interface attribute "isabus", "eisabus" etc., and the autoconf
framework now allows to specify an interface attribute on config_found()
and config_search(), which limits the search of matching config data
to these which attach to that specific attribute.
So we basically have to call config_found_ia(..., "foobus", ...) where
such a bus is attached.
As a consequence, where a "mainbus" or alike also attaches other
devices (eg CPUs) which do not attach to a specific attribute yet,
we need at least pass an attribute name (different from "foobus") so
that the foo bus is not found at these places. This made some minor
changes necessary which are not obviously related to the mentioned buses.
wdc_regs structure, and array of which (indexed per channel) is pointed
to by struct wdc_softc.
- Move the resulting wdc_channel structure to atavar.h and rename it to
ata_channel. Rename the corresponding flags.
- Add a "ch_ndrive" member to struct ata_channel, which indicates the
maximum number of drives that can be present on the channel. For now,
this is always 2. Add an ATA_MAXDRIVES constant that places an upper
limit on this value, also currently 2.
instead have a call down from the PCMCIA mid-layer to set it. Use this from
pcmcia_function_enable(). (Currently the policy is the same, but this would
allow for more flexibility in deciding which mode to use.)
Now it is safe to hold the socket enabled during attach, so do that. Only
one enable/disable cycle to attach a card now!
Allow to enable the game port on an ES1888, in case the firmware didn't
this. (Otherwise we still rely on the firmware having mapped the sound
related registers.)
Limit this to the "isa" attachment for now because this is the only
one I'm able to test.
Attach the "joy" device directly at "ess" to make sure the port is
enabled before the "joy" probe/attach.
This makes the joystick port usable on a "PWS" alpha (Miata).
registers are registers that overlap with others on many controllers, but
which may actually be distinct on some controllers. Right now, the two
shadows are:
- wd_status (usually overlaps wd_command)
- wd_features (usually overlaps wd_error)
Add a new helper function, wdc_init_shadow_regs(), used to initialize
the shadow register handles on controllers where they do actually overlap.
Partially from Jordan Rhody @ Wasabi Systems, Inc.
drivers that attach to it. This allows for other host interface chips
that use the same keyboards and mice, such as the ones in the ARM
IOMD20, ARM7500, and SA-1111. The PC-compatible driver is still
called pckbc(4), and the new abstraction layer is "pckbport", so the
child devices have moved from sys/dev/pckbc to sys/dev/pckbport, which
also contains some code shared between all host controllers. To avoid
incompatibility, pckbdreg.h is still installed in
/usr/include/dev/pckbc.
In theory, this shouldn't cause any behavioural changes in the drivers
concerned. Thy just use rather more function pointers than before. Tested
on i386 and (with a new host driver) acorn32. Compiled on several other
affected architectures.
with ACPI and PNPBIOS attachments; move it to new atppc_isadma.[ch]
and g/c previous atppc_isa_subr.[ch]
move attppc_isa_softc struct definition to atppc_isa.c, and reorganize
the attachment somewhat for better readability; also g/c detach support code
* lpt device is defined in MI place (dev/ppbus/files.ppbus), dev/ic/lpt.c
is included there too; dev/ic/lpt.c is not included if ppbus is
configured or if there is alternative platform lpt (like for pc532)
* g/c MD lpt definitions and custom puc/upc attachments,
glue moved to conf/files and dev/pci/files.pci respectively; remove
device lpt definition from dev/isa/files.isa
* add ppbus parport attribute, atppc device attachments, adjust plip and lpt
glue
- wdc_xfer to ata_xfer
- channel_queue to ata_queue
and move them to <dev/ata/atavar.h> so they can be used by non-wdc ATA
controllers. Clean up the member names of these structures while at it.
in a different fashion. Individually, they have the same functionality,
but their layout is different. An example of such a chipset is
the Promise 203xx.
To be able to deal with this, transform the cmd and dma bus_space handles
into an array of handles, each seperately created with bus_space_subregion.
The code generated by using the extra indirection shouldn't change much,
since the extra indirection is negated by having the offset calculation
already done in bus_space_subregion. E.g.
bus_space_write_4(tag, handle, offset, value)
becomes
bus_space_write_4(tag, handles[offset], 0, value)
Reviewed by Manuel Bouyer. Tested on wdc_isa, wdc_pcmcia, viaide, piixide (i386)
and on cmdide (sparc64).
http://mail-index.netbsd.org/tech-kern/2003/09/25/0006.html
This adds a device (atabus) between IDE controllers and wd or atapibus, to
have each ATA channel show up in the device tree. Later there will be atabus
devices in /dev, so that we can do IOCTL on them.
Each atabus has its own kernel thread, to handle operations that needs polling,
e.g. reset and others.
Device probing on each bus it defered to the atabus thread creation.
This allows to do the reset and basic device probes in parallel, which reduce
boot time on systems with several pciide controllers.
removing assumptions that there are only two B channels and by
adding support for a varying number of channels.
Due to this, rename previously used isdn identified "bri" to "isdnif",
which better describes the current situation.
1) Don't wait for DRQ on an IDENTIFY command -- if it's not set when we see
BSY clear, abort the command and ignore the drive. (Do this by testing
for DRQ in the read/write cases in __wdccommand_intr().)
2) Don't wait for DRQ to deassert when we finish an IDENTIFY (or any other
non-block command that reads data) -- we don't do this for block I/O, and
empirically it doesn't clear on my CF cards at all, causing a pointless 1s
delay.
3) Add comments to some of the delay()s, and add missing ones in wdcreset()
and the WDCC_RECAL in the so-called "pre-ATA" probe.
4) Slightly simplify the reset sequence -- we were doing an extra I/O.
5) Modify the register writability test to make sure that registers are not
overlapped -- this can happen in some weird cases with a missing device 1.
6) Check the error register value after the reset -- if it's not 01h or 81h,
as appropriate (see ATA spec), punt.
Tested with a number of ATA-only, ATAPI-only, mixed ATA-ATAPI, CF, and IDE
disk configurations.
Also remove the SINGLE_DRIVE nonsense again.
most polling.
2) Clean up some goofiness in pciide -- get rid of the whole "candisable" path
(it's gratuitous) and simplify the code by calling pciide_map_compat_intr(),
*_set_modes() and wdc_print_modes() from central locations.
3) Add a register writability and register ghost test to eliminate phantom
drives more quickly.
PCIC_VENDOR_NONE: New.
PCIC_VENDOR_CIRRUS_*: Collapse the 2 chips into one vendor ID.
pcic_ident_ok(): Check the ID revision field -- if it's 0, punt.
pcic_vendor(): Check the ID revision field -- if it's 0, or the ID register
is all-1s, assume there is no chip present. (Previously this would return
"Unknown controller" -- which, AFAICT, *never* resulted in a working device.)
Do the Cirrus check only after verifying that we got the Intel ID.
pcic_attach(): Use a priori knowledge of the Cirrus chips to determine the
number of sockets rather than trying (unsuccessfully) to probe. Also, just
blast all of PCIC_INTR -- we do this in pcic_deactivate_card() anyway.
be inserted into ktrace records. The general change has been to replace
"struct proc *" with "struct lwp *" in various function prototypes, pass
the lwp through and use l_proc to get the process pointer when needed.
Bump the kernel rev up to 1.6V
isa_dmamap_create() calls to their open/close entrypoints. This worked
with some luck, but broke on i386 when _bus_dmamap_create started
to allocate bounce buffers upfront, since memory below 16M may well
not be available when the sound devices is opened for the Nth time.
To fix this, create a new simple interface, isa_drq_alloc/isa_drq_free,
wrappers around already existing bitmask macros. These are expected
to be used before an isa_dmamap_create call, and after an
isa_dmamap_destroy call, respectively. For the sb and ad1848 drivers,
they're deferred until open/close.
All isa_dmamap_create calls can now use BUS_DMA_ALLOCNOW and be done
at attach time.
malloc types into a structure, a pointer to which is passed around,
instead of an int constant. Allow the limit to be adjusted when the
malloc type is defined, or with a function call, as suggested by
Jonathan Stone.
