5a74618671
The ns32532 has no alignment restrictions. Define ALIGNED_POINTER to
...
reflect this.
1997-03-01 09:50:19 +00:00
035bf3987f
make db_expr_t a long.
1997-03-01 09:50:16 +00:00
73ea4ca540
Document a non-obvious use of addr in interrupt().
1997-03-01 09:49:48 +00:00
799c3228ec
kgdb_connect and kgdb_panic are not define in the mi kgdb_stub.c. Define
...
them here.
1997-03-01 09:49:45 +00:00
63183795c0
imask[IPL_ZERO] was updated after recomputing the run masks for all the
...
interrupt handlers. Due to this
- DIAGNOSTIC kernels would panic
- check_sir would run with the interrupt registered last blocked
Credits for finding and fixing this go to Ian Dall.
1997-03-01 09:49:44 +00:00
597322b455
* Adapt to changed definition of struct db_variable.
...
* Some cosmetic changes.
1997-03-01 09:49:42 +00:00
453b47e7bb
removed. We now use the mi version from /sys/kern.
1997-03-01 09:49:20 +00:00
2de163471e
Minimal changes to adapt to removal of NCR5380_PERMIT_RESELECT.
...
This driver should be updated to allow per-target control over
disconnect/reselect, but I will leave that to the port masters.
1997-02-26 22:29:08 +00:00
115b6d92fa
Define ALIGNED_POINTER
1997-02-24 23:16:53 +00:00
258699485f
add missing parentheses to assym.h rule.
1997-02-10 10:54:00 +00:00
9712aaf1b5
* clean:: -> clean: change.
1997-02-08 09:34:46 +00:00
f3cdc89574
* Use Phil Budne's full name in the copyright header.
...
* Define RECOVER to something faster.
* Check for a valid softc in scnsoft. When there is
a "hole" (e.g. you have scn0,scn1, scn4, scn5) the
old code would panic. Thank's to Phil Budne for
finding and fixing this bug.
1997-02-08 09:34:31 +00:00
f3ae5cdf29
* Convert NetBSD/pc532 to use the new libkvm.
1997-02-08 09:34:12 +00:00
8a3b8c0477
* Fix a bug that would had cause an hang on fpuless machines.
1997-02-08 09:34:09 +00:00
8ec2fa0cfa
* Convert NetBSD/pc532 to use the new libkvm by stealing code
...
from the alpha port.
1997-02-08 09:34:06 +00:00
5a17e54866
* Convert NetBSD/pc532 to use the new libkvm.
1997-02-08 09:34:01 +00:00
92842a6db7
* Remove some unused macros.
1997-02-08 09:33:58 +00:00
efea7eb83f
* Correctly format the NetBSD-Id string.
1997-02-08 09:33:55 +00:00
6f5bca455b
* Remove whitespaces from empty lines.
...
* Add (commented out) type and asmtype commands. asmtype will
be used to define the gcc constraint used to emit constants
and type will be used to define the type the constant should
get casted to before passing it to printf.
1997-02-08 09:33:52 +00:00
869f7f78fb
* Now that we use genassym.sh/genassym.cf this is no longer needed.
1997-02-08 09:33:50 +00:00
0e2fbfdbcd
* The rom monitor and the bootprogram might have another idea about unit
...
numbers then the kernel. Use some code stolen from the mvme68k port
to find the bootdevice.
1997-02-08 09:33:45 +00:00
ed7d482ddf
* Don't wildcard scn[0-7]. This will not work for holes (at the moment).
1997-02-08 09:33:28 +00:00
d90eb8ee1e
* Corrected rule for assym.h. In case genassym.sh fails assym.h
...
has to be removed and a non-zero exit value has to be provided
to make.
* Removed last references to genassym and genassym.o.
1997-02-08 09:33:27 +00:00
3eded68a05
* Added PFIL_HOOKS to make modloading of the ipf module possible.
...
* Aded UNION fs. The lkm doesn't work at the moment.
1997-02-08 09:33:24 +00:00
6224783740
* Added KMEMSTATS option to save some memory.
1997-02-08 09:33:22 +00:00
021ca50fe4
* Added INSECURE to allow modloads in multiuser mode.
...
* Added PFIL_HOOKS to make modloading of the ipf module possible.
1997-02-08 09:33:20 +00:00
64065fbba2
* Removed old and invalid comment.
...
* Added LKM, PFIL_HOOKS and NFSSERVER options.
* Added four ccd devices.
* Removed PLIP and NO_INLINE_SPLX options.
* Removed MFS, MSDOSFS, CD9660, FDESK, KERNFS and PROCFS filesystems
because they all are lkmable.
1997-02-08 09:33:17 +00:00
67c8bca33d
* Convert NetBSD/pc532 to use the new libkvm.
1997-02-08 09:33:03 +00:00
8f1067c4d8
* Remove some unused macros.
1997-02-08 09:32:33 +00:00
1f7aefb0a1
* Declare bootdev and booted_device.
1997-02-08 09:32:30 +00:00
19d153fc48
Nuke some options GENERIC residue.
1997-02-04 04:57:10 +00:00
0b3a46d6b3
Nuke some GENERIC residue.
1997-02-04 04:31:55 +00:00
a6befcbede
* clean, depend :: -> : change
...
* use genassym.sh to create assym.h
1997-02-01 09:23:02 +00:00
739f23a219
This file is obsolete; this information is now generated by config(8).
1997-01-31 05:12:49 +00:00
0735d8d32e
Use new machine-independent setroot().
1997-01-31 01:57:51 +00:00
fcb565dde2
Adopt for new file system and root spec grammar.
1997-01-31 01:57:08 +00:00
1370131ffd
Add scripts and documentation for a new method to create assym.h files.
...
With the kern/genassym.sh script HOSTED_CC is no longer used to create
assym.h files. This should make crosscompilation easier.
1997-01-30 09:37:20 +00:00
7b40f5228e
"md" is declared in sys/conf/files, now.
1997-01-21 09:39:20 +00:00
b89a3425b7
Eliminate obsolete TIMEZONE and DST options.
...
Eliminate obsolete global kernel variable "struct timezone tz"
Add RTC_OFFSET option
Add global kernel variable rtc_offset, which is initialized by
RTC_OFFSET at kernel compile time.
on i386, x68k, mac68k, pc532 and arm32, RTC_OFFSET indicates how many
minutes west (east) of GMT the hardware RTC runs. Defaults to 0.
Places where tz variable was used to indicate this in the past have
been replaced with rtc_offset.
Add sysctl interface to rtc_offset.
Kill obsolete DST_* macros in sys/time.h
gettimeofday now always returns zeroed timezone if zone is requested.
settimeofday now ignores and logs attempts to set non-existant kernel
timezone.
1997-01-15 01:28:28 +00:00
27381f0aaf
* Add cdevsw entry for /dev/ipl.
1997-01-11 11:00:41 +00:00
47fe16475c
* Use confargs in probe and attach routines.
...
* Irq and address are now printed by mbprint.
1997-01-11 10:58:12 +00:00
072388d107
Device rename: `rd' => `md'
1997-01-01 23:04:58 +00:00
f750d179be
rename: ramdisk => md
1996-12-28 23:42:33 +00:00
603b61c3e0
rename: ramdisk => md
1996-12-28 23:22:07 +00:00
e16e1de8fd
* remove NKPDE, this was never used.
...
* add IV_MASK (new member of struct iv) and IV_SIZE (sizeof(struct iv)).
1996-12-28 09:15:27 +00:00
92a5d4d222
* We no longer have a scsi subdirectory. Remove it from the list of
...
directories in which get tag links.
1996-12-23 08:38:02 +00:00
2e7cb22267
* Use bcopy, not memcpy.
1996-12-23 08:37:55 +00:00
54e6abd9e7
* Remove __BROKEN_INDIRECT_CONFIG.
1996-12-23 08:37:43 +00:00
4bd938a998
* Remove IPL_NONE. This is no longer used.
...
* Add IPL_HIGH. Alias IPL_HIGH to IPL_RTTY
* Define splrtty (used by the scn driver).
* Add iv_level and iv_mask to struct iv. These define the IPL at
which the handler should run.
* intr_establish now takes *two* ipls. One at which the handler should run,
and one in which the interrupt should get blocked.
1996-12-23 08:37:41 +00:00
b01c5dfbcb
* Define NKPDE_BASE, NKPDE_MAX and NKPDE_SCALE for boottime computation of
...
nkpde (From the i386 port).
1996-12-23 08:37:38 +00:00
b30b4f9fcf
* Define new sysctl variable "machdep.nkpde" (From the i386 port).
1996-12-23 08:37:37 +00:00
41cc99aa8c
* Rearange duart_info and add hwflags to store uart type (Ian Dall).
...
* Define SCN_RING_HIWAT and add sc_rbhiwat to scn_softc. When the
ringbuffer gets full up to this mark, rts gets asserted (Ian Dall).
* Add sc_rx_blocked to scn_softc. This is used to tell scnsoft that
rxinterrupts are blocked (Ian Dall).
1996-12-23 08:37:11 +00:00
2c7e970491
* Define the bits in MR0 for the SCC26C92 (Ian Dall).
...
* Define SCC26C92-only commands (Ian Dall).
1996-12-23 08:37:10 +00:00
b080d4fea0
* Match functions take a "struct cfdata *" as their second argument.
...
* intr_establish now takes *two* ipls. One at which the handler should run,
and one in which the interrupt should get blocked.
All the following changes were provided by Ian Dall:
* Remove SCN_HSOFT. Now that the pc532's software interrupt system is running
from int14, this won't work anymore.
* Add code to detect uart type (SCN2681, SCC2692 or SCC26C92).
* Cleanup my RECOVER mess. Thank's to Ian Dall for reading the datasheet
and removing all the unnecessary RECOVERs.
* Cleanup scnrxintr.
* Implement scnhiwflow.
* Do not use automatic RTS. This and scnhiflow and some changes to the
interrupt system suggested by Ian fix the scn overrun problem at 57600
baud.
1996-12-23 08:37:07 +00:00
70597563c6
* Match functions take a "struct cfdata *" as their second argument.
...
* intr_establish now takes *two* ipls. One at which the handler should run,
and one in which the interrupt should get blocked.
* Make transfersize configurable for input and output. Default the input
transfersize to 128 bytes. That way interrupts won't be disabled for more
then about 128us-256us for slow targets. This is necessary to prevent scn
fifo overruns. Cleanup the pdma code. Thank's to Ian Dall for these
changes.
1996-12-23 08:37:04 +00:00
c3f3bc0228
* Match functions take a "struct cfdata *" as their second argument.
...
* intr_establish now takes *two* ipls. One at which the handler should run,
and one in which the interrupt should get blocked.
1996-12-23 08:37:02 +00:00
7736d33def
* membus is now called mainbus.
1996-12-23 08:36:43 +00:00
b6f24c53a9
* Use std.pc532.
...
* Remove obsolete options CONFIG_NEW and CON_BRK_PANIC.
1996-12-23 08:36:40 +00:00
a6953fcdd8
* membus is now called mainbus.
1996-12-23 08:36:37 +00:00
d949824775
* Use std.pc532.
...
* Make it work on 30mhz machines.
* Configure MSDOSFS, CD9660, KERNFS, NFSCLIENT and INET.
* Configure SCSI-cds, slip and ppp.
* Update for mi ramdisk driver.
1996-12-23 08:36:36 +00:00
bddb87af16
* Configure UNION and NULLFS. UNION doesn't seem to work as a lkm yet.
1996-12-23 08:36:33 +00:00
181cf4f705
* Use std.pc532.
...
* Make it work on 30mhz machines.
1996-12-23 08:36:31 +00:00
553486636e
* Define and use nkpde.
1996-12-23 08:36:11 +00:00
15e824377a
* Add code for CPU_NKPDE sysctl.
...
* Compute nkpde at boottime.
1996-12-23 08:36:08 +00:00
eb68ad8281
* Recode _interrupt to use IV_MASK.
1996-12-23 08:36:05 +00:00
99cc2dd46d
* Initialize IPL_HIGH's imask to 0xffffffff.
...
* Initialize iv_level for all interrupts.
* Protect the call to the sir-handler with splraise.
* intr_establish now takes *two* ipls. One at which the handler should run,
and one in which the interrupt should get blocked.
* Compute iv_mask for all interrupts in intr_establish.
1996-12-23 08:36:02 +00:00
c1921b48eb
* intr_establish now takes *two* ipls. One at which the handler should run,
...
and one in which the interrupt should get blocked.
1996-12-23 08:36:00 +00:00
9d6e666ea7
* Rename membus to mainbus.
...
* Remove config_scan. Thank's to Chris G. Demetriou for providing patches.
1996-12-23 08:35:57 +00:00
26f6e45d39
Fix a typo: s/COPT/COPTS/
1996-12-22 19:14:14 +00:00
781cd59dd4
* Enlarge kernel virtual memory space. The pc532 kernel now runs at
...
0xf8000000. When the kernel was running at 0xfe000000, the INSTALL
kernel would not run on a 32mb machine.
1996-12-07 09:24:37 +00:00
96acdadef7
First step inn removing config_scan() and the hacks that gave devices
...
on indirect-config busses a (permanent) softc that they could share
between 'match' and 'attach' routines:
Define __BROKEN_INDIRECT_CONFIG so that old autoconfiguration
interfaces are used, until drivers are converted to use the new
interfaces (actually, converted back to use the _older_ interfaces)
which prohibit indirect configuration devices from receiving a softc
in their match routine that they can share with their attach routine.
1996-12-05 00:13:47 +00:00
4c1d96de78
* Replace explicit -O2 in CFLAGS with COPTS macro. Default COPTS?= -O2.
...
Lets users over-ride with makeoptions COPTS="..." in kernel config files.
Leave `mandatory' flags (like -msoft-float which on m68k enforces no
FP in kernel) in CFLAGS.
1996-12-01 06:12:25 +00:00
9da5f60715
PROF -> GPROF
1996-11-30 02:48:57 +00:00
e756776636
* Fix cut and paste error.
1996-11-24 13:35:18 +00:00
901a1f3641
* Calibrate _delay for a 30mhz system if CPU30MHZ is defined.
...
* A few changes to _interrupt to support the new softint mechanism.
1996-11-24 13:35:15 +00:00
110e4e09ff
* Prototyping tweaks.
...
* Support for the new softint mechanism. Softints are now requested by
triggering an unused ICU hardware interrupt. The idea for this was
contributed by Phil Budne.
1996-11-24 13:35:12 +00:00
518b5e6ae5
* Prototyping tweaks.
1996-11-24 13:35:10 +00:00
0f6a4a93fd
* Rewrite of membusattach/membusscan/membusprint.
1996-11-24 13:35:08 +00:00
58dc92f52e
* Prototyping tweaks.
...
* Changes to support the new softint mechanism.
1996-11-24 13:34:45 +00:00
591a6794e2
* A few changes to support the new softint mechanism.
1996-11-24 13:34:44 +00:00
9f82b6d4d1
* New file. Defines the structure describing config arguments passed to
...
match/attach functions.
1996-11-24 13:34:42 +00:00
a0117d39dd
* Prototyping tweaks.
...
* Real probe code added.
* Duart info is now allocated only for devices that are present.
* Added IO-Recovery delays for 30mhz systems.
* Removed a few potential NULL-pointer references.
1996-11-24 13:32:53 +00:00
ee943634a8
* Prototyping tweaks.
1996-11-24 13:32:48 +00:00
e9d6e1a616
* New file. Defines config options and devices common to all pc532s.
1996-11-24 13:28:56 +00:00
63758fd99b
* Include to std.pc532 added.
1996-11-24 13:28:52 +00:00
16b48272c4
Define _BSD_CLOCKID_T_ and _BSD_TIMER_T_
1996-11-15 22:38:45 +00:00
10af6d961f
* We get bcopy from libkern.o now.
1996-11-07 07:34:02 +00:00
6ed1a51b35
* libkern.o already has bcopy.o. Link it in front of libsa.a.
1996-11-07 07:33:55 +00:00
a95805b41f
* Define the ALTENTRY macro.
1996-11-07 07:33:28 +00:00
ee011c080d
* The pc532 port is now using the mi ramdisk driver.
...
* Use the mi version of ns_cksum.
1996-11-07 07:32:29 +00:00
5ca00f7293
* Cosmetic changes.
1996-11-07 07:32:21 +00:00
5596cf17ea
* Cosmetic changes.
...
* Configure LKM support.
* Remove filesystems that are normally not used.
* Configure SCSI-uk driver.
1996-11-07 07:32:18 +00:00
93811ddf97
* Cosmetic changes.
...
* Only FFS is needed for the install kernel.
* Configure the console to 8N1 (that's what the pc532's rom monitor uses).
* The install kernel doesn't need to know about CDROM drives.
* Use the new mi ramdisk.
1996-11-07 07:32:13 +00:00
7a27370327
* Cosmetic changes.
...
* Configure only NFS, FFS and LFS filesystems. All other filesystems are
modloadable.
* Configure SCSI-uk driver.
1996-11-07 07:32:10 +00:00
bc9eccaebb
* Cosmetic changes.
...
* Configure SCSI-uk driver.
1996-11-07 07:32:07 +00:00
1b92fb966e
* bcopy and bzero are part of libkern now.
1996-11-07 07:31:20 +00:00
dbaaf5e560
* rd_attach_hook/rd_open_hook. Stolen from sun3/dev/rd_root.c
1996-11-07 07:21:00 +00:00
ddb9815a80
* We are using the mi ramdisk driver now.
1996-11-07 07:20:37 +00:00
4ae217f7fa
* We are using the mi ncr driver now.
1996-11-07 07:20:29 +00:00
df2a490d8f
* Not in use for a very long time.
1996-11-07 07:20:28 +00:00
cab14d3b2b
* ntoh is part of libkern now.
1996-11-07 07:18:27 +00:00
c1e3a7db8d
* This not different from netns/ns_cksum.c. Delete this copy.
1996-11-07 07:18:26 +00:00
f0d6340cba
* Tell the vm system that kerneltext is mapped readonly. Stolen from
...
atari/atari/machdep.c.
1996-11-07 07:18:23 +00:00
8ea6b5f65c
* Add ch, ss and uk devices.
...
* Make lkms work.
1996-11-07 07:18:21 +00:00
eead8b9100
* bcopy is part of libkern now.
1996-11-07 07:18:19 +00:00
8a3333b2a9
Fix an inconsistency that came in with Lite: setrq() was renamed to
...
setrunqueue(), but remrq() was never renamed. Rename remrq() to
remrunqueue().
1996-11-06 20:19:19 +00:00
8738c57e61
* Phil Budne's is now integrated.
...
* Remote kerneldebugging with gdb works too.
1996-10-23 07:55:10 +00:00
2336fbd2c6
* Phil Budne's much improved scn driver.
1996-10-23 07:52:35 +00:00
e7e91939da
* Remove references to deleted files (oldncr.c, dp.c).
1996-10-23 07:50:03 +00:00
54eec4c697
* Add EXEC_SCRIPT and EXEC_AOUT.
1996-10-23 07:49:58 +00:00
0cdf2807ab
* KLONDIKE has only four serial lines.
...
* KLONDIKE has a ns381 installed.
* Add EXEC_SCRIPT and EXEC_AOUT.
* Enable ddb.
* Enable FDESC.
* Monitor speed is 9600 baud.
* Monitor speaks 8N1.
* Pin down devices on the SCSI-Bus.
* Configure vnd, bpfilter, ppp and tun.
1996-10-23 07:49:55 +00:00
45fe815542
* Add EXEC_SCRIPT and EXEC_AOUT.
...
* Remove lines commented out.
* scsibus0 is attached to ncr0.
1996-10-23 07:49:54 +00:00
225801ae14
* New file; configuration for my second pc532.
1996-10-23 07:49:52 +00:00
414cbce393
* Add EXEC_SCRIPT and EXEC_AOUT.
...
* Use new options for to set the console baudrate and the default
tty mode.
* Include PPP_BSDCOMP and PPP_DEFLATE.
* scsibus0 is attached to ncr0.
1996-10-23 07:49:49 +00:00
63d15a966d
* Sync with i386 version.
...
* Scratch ram for debugger stacks ends at VM_MIN_KERNEL_ADDRESS + 0x1000
and not at VM_MIN_KERNEL_ADDRESS + 0x2000.
1996-10-23 07:46:08 +00:00
e9a160096b
* Sync with i386 version.
1996-10-23 07:46:07 +00:00
4b2a039488
* configure() has to be declared void.
1996-10-23 07:46:04 +00:00
865930408c
* Do not include limits.h, use machine/limits.h.
1996-10-23 07:43:44 +00:00
897acfdcbb
* Do not include stddef.h.
...
* Add definition of offsetof.
1996-10-23 07:43:42 +00:00
1a81564477
* Declare reserve_dumppages and pmap_activate.
1996-10-23 07:30:57 +00:00
1731660b98
* Declare kvtop.
1996-10-23 07:30:54 +00:00
b12cf5890d
RCS id police.
1996-10-15 21:59:03 +00:00
e37692f04d
backout previous kprintf change
1996-10-13 03:29:05 +00:00
7c9b908394
use in_addr_t and in_port_t
1996-10-13 03:12:38 +00:00
848c9d8f02
printf -> kprintf, sprintf -> ksprintf
1996-10-11 00:39:22 +00:00
9176e41d88
* Pull over prototyping fixes from i386.
1996-10-09 07:45:28 +00:00
b43657168e
* Add prototypes.
...
* Add support for ddb and kgdb.
1996-10-09 07:45:25 +00:00
9d22d4d454
* Fix declaration of setconf.
1996-10-09 07:45:23 +00:00
85ddb3de03
* A few prototyping tweakes and deletion of unused variables.
...
(pulled over from i386).
1996-10-09 07:45:20 +00:00
e90bc618bd
* Support for ddb.
...
* New patchable variable maxphysmem to limit physical memory.
That's useful to simulate small machines for testing install
kernels.
* Make debugging crashdumps with gdb -k work.
* microtime is moved to clock.c.
* Reserve memory for symbol table when ddb is configured.
* Move checks for RB_KDB into consinit.
1996-10-09 07:45:17 +00:00
89a49bedc6
* Set _kernel_text to the correct value.
...
* Fix a typo in delay().
* Disable generation of profiling prologue for proc_trampoline,
sigcode, idle, handle_trap, flush_icache, svc and interrupt.
* A few tweaks to make kgdb and ddb work nicer.
1996-10-09 07:45:13 +00:00
560bd7e107
* New file for kgdb support.
1996-10-09 07:45:06 +00:00
9c3592a5ca
* Reduce softint latency.
...
* Pull over change from i386 to make statclock > (tty | net | bio).
1996-10-09 07:45:05 +00:00
1dceda47e0
* Make it work for NetBSD and not for mach. Most of
...
this was done by Phil Budne.
* Remove things not used by NetBSD.
* Make stacktracebacks work better.
1996-10-09 07:45:03 +00:00
4484a4406d
* New file for routines common for kgdb and ddb support.
1996-10-09 07:45:00 +00:00
6f37f75ecb
* Make it work for NetBSD and not for mach. Most of
...
this was done by Phil Budne.
* Move some functions shared with kgdb to db_memrw.c.
1996-10-09 07:44:59 +00:00
79ded0d7e1
* Make it work for NetBSD and not for mach. Most of
...
this was done by Phil Budne.
1996-10-09 07:44:56 +00:00
afd88ad8ed
* Remove unused function spinwait.
...
* Add Phil Budne's microtime.
1996-10-09 07:44:54 +00:00
00695d93ae
* Now that ddb works, boot should set esym to the correct value...
1996-10-09 07:42:13 +00:00
483cff53cd
* Add the README file from Ian Dall's original distribution.
1996-10-09 07:40:45 +00:00
84b238b8eb
* Add files needed for kgdb and ddb.
...
* Delete (commented out) ntoh.s.
1996-10-09 07:34:42 +00:00
f0c2efd752
* Remove ncr_minphys. Simply use minphys.
...
* Protect interrupt code with splbio.
* Don't use intr_disable/intr_enable in the pdma routines.
1996-10-09 07:29:58 +00:00
f28c7ec9dd
* Don't use ansi c prototypes. Use the __P() macro.
...
* Support for bpf added.
* Don't duplicate code, use ether_ifattach instead.
* Recode plipreceive and pliptransmit in assembler.
This improves performance from 40 kbyte/s to 50 kbyte/s
between a 30mhz pc532 and a 25mhz i386.
1996-10-09 07:29:55 +00:00
f8c337b300
* Remove intr_disable/intr_enable stuff.
...
* Reduce softint latency.
1996-10-09 07:28:52 +00:00
f673492195
* redefine MAXPHYS to 128k to support DAT-tapes with a
...
very large blocksize.
1996-10-09 07:28:50 +00:00
b5542a0938
* The expression to which ICU_CLK_HZ is defined has to be
...
protected by parentheses.
1996-10-09 07:28:47 +00:00
0a6d52bb21
* Make it work for NetBSD (and not mach). Most of
...
this was done by Phil Budne.
* Delete unused macros.
* Define a few things to support kgdb.
1996-10-09 07:28:44 +00:00
b1bd20fbe2
* Delete define for DELAY.
...
* Add prototype for delay()
* Add prototypes for functions from various
machine dependent files.
1996-10-09 07:28:43 +00:00
1ebd4878ae
* Include profiling prologue not only when PROF is
...
defined but also when GPROF is defined.
* Provide _ENTRY and _ASENTRY to make it possible to
define functions that should not be profiled.
1996-10-09 07:28:40 +00:00
b83348353f
* ddb now works.
...
* Profiling works as well.
1996-10-09 07:21:47 +00:00
472889f8e4
moved to aout_machdep.h (via repository copy)
1996-10-08 12:57:37 +00:00
b3ffba62a6
Move strip(1) flags into a separate variable, so that $STRIP can
...
be passed to subordinate make(1)s. Remove $TOUCH. Add HOSTED_CC,
HOSTED_CPPFLAGS, and HOSTED_CFLAGS, and use them when depending genassym.
1996-09-09 21:06:55 +00:00
e6dd44f034
Use SIGBUS iff we get a legitimate bus fault. Use SIGSEGV for page protection
...
violations (per Solaris, SVR4, AIX, Linux, Irix, and SunOS).
1996-09-07 22:26:41 +00:00
fc3def4096
Remove duplicate declarations of LKM functions and macros.
1996-09-05 15:46:22 +00:00
0a59726320
Fix obvious typo.
1996-09-02 12:42:11 +00:00
b3eac79b64
tty stop functions really should return void, not int, and certainly not both.
1996-09-02 06:43:16 +00:00
30a617c634
Wrap the default definition of `S' in `.ifndef'.
1996-08-31 21:40:47 +00:00
71ad30d0e9
(1) set scsi_link channel to either the appropriate channel (if a
...
multi-channel driver), or to SCSI_CHANNEL_ONLY_ONE if a
single-channel driver.
(2) use scsiprint() rather than a locally-defined autoconfig print
function, and kill any locally-defined print function.
1996-08-28 18:59:15 +00:00
2a73ef60b7
change cfprint_t type definition to take a const char *, rather than
...
a char *, because that's what was really intended, and because
if the print function modifies the string, various things could become
unhappy (so the string should _not_ be modified).
1996-08-27 21:53:46 +00:00
b8e9f36083
add COMPAT_12.
1996-08-26 23:39:36 +00:00
558d72128e
Put into . Remove hooks for `config-dependent' and
...
`device-driver' flags.
1996-08-12 00:51:24 +00:00
cf67f29afe
* Add a HOSTED_C_C variable, which strips `-p', `-pg', and
...
`-nostdinc', and use it when building genassym.
* Use `-nostdinc' just to be sure we're self-contained.
1996-08-10 06:07:57 +00:00
f94052ed3a
* Define CWARNFLAGS and MKDEP in some moderately consistent fashion.
...
* Make S expand to an absolute path at compile time.
* Use `-S' rather than `-x' to remove debugging symbols.
* Garbage collect unused variables.
* Reverse a handful of port-specific changes that do not correspond to
the common build model and are not needed.
1996-08-10 05:29:24 +00:00
5abbf990f3
Change reboot(2) to take two arguments: bootopt like normal and also
...
a boot string for firmware that can do this, such as the SPARC and
the sun3 models. It is currently silently ignored on all other
hardware now, however. The MD function "boot()" has been changed to
also take a char *.
1996-08-09 10:30:23 +00:00
318585cf7f
Removal of some dead code. Moving of data definitions. (From Matthias)
1996-07-31 16:47:30 +00:00
99db994eea
Move to the MI ncr5380 driver.
1996-06-26 04:31:33 +00:00
af576d8a9f
no need for a local implementation of SIOCGIFMTU; delete it.
...
s/ifr_metric/ifr_mtu/ where appropriate (in SIOCSIFMTU code), since
MTU data no longer (loggically) stored in ifr_metric.
1996-06-13 21:51:53 +00:00
6c28c57a2a
xxcd => xx_cd.
1996-05-23 14:14:20 +00:00
386ecdc658
Prototype dk_establish.
1996-05-19 05:34:25 +00:00
8d6d309bf0
Minor fixes from Matthias Pfaller.
...
ncr.c => add parity disable code.
1996-05-19 05:32:09 +00:00
04241dc8eb
Add _kernel_text.
1996-05-17 16:38:24 +00:00
540f9550c0
Make `make depend' work for libraries.
1996-05-11 16:11:30 +00:00
ccc18dd2ae
Changed struct ifnet to have a pointer to the softc of the underlying
...
device and a printable "external name" (name + unit number), thus eliminating
if_name and if_unit. Updated interface to (*if_watchdog)() and (*if_start)()
to take a struct ifnet *, rather than a unit number.
1996-05-07 01:12:53 +00:00
333943186d
Small tweeks from Matthias Pfaller.
1996-05-03 23:22:54 +00:00
0b85f48338
Updates from Matthias Pfaller and Ian Dall.
1996-05-03 23:19:26 +00:00
dba4d32f68
Initial check-in of the ieee fp support for the pc532.
...
ieee fp support by Ian Dall, NetBSD/pc532 integration by Matthias Pfaller.
Includes setjmp/longjmp added to locore.s.
1996-04-04 06:36:03 +00:00
83f9bdc359
update for the fact that config_found() and config_rootfound() now
...
return pointers. (Check vs. NULL, rather than just boolean tests.)
1996-04-04 06:25:00 +00:00
933d138841
Change %r -> %: as for recursive printf's
1996-03-30 21:01:21 +00:00
5f5484b74a
tweek to delay (locore.s) and to FPU trap handler(trap.c).
1996-03-28 05:00:06 +00:00
e7b9b54ea3
Remove __SWAP_BROKEN.
1996-03-28 04:53:17 +00:00
6d61867cc0
Remove old files not needed now that the pc532 uses the MI ncr5380 driver.
1996-03-28 04:49:32 +00:00
77abd102b7
New device attachment scheme:
...
- split softc size and match/attach out from cfdriver into
a new struct cfattach.
- new "attach" directive for files.*. May specify the name of
the cfattach structure, so that devices may be easily attached
to parents with different autoconfiguration semantics.
1996-03-17 01:38:52 +00:00
2ce5f1478b
Add _BSD_WINT_T_ definition so we can handle wint_t type added in NA1.
1996-03-16 01:31:45 +00:00
ab0e60a42f
fdopen -> filedescopen
1996-03-14 21:20:59 +00:00
a3448dcd3e
Update it.
1996-03-11 23:14:43 +00:00
509ba91070
have files.pc532 use include feature for scsi.
...
use MI ncr driver.
1996-03-11 23:09:09 +00:00
26ee503b71
More precise DELAY function.
1996-03-11 22:50:17 +00:00
6d5bf6a3ea
Support for move to MI ncr5380 driver.
1996-03-11 20:56:48 +00:00
d92d9aa2f7
Move the pc532 ncr5380 driver to the MI one.
1996-03-11 20:50:50 +00:00
18ec26aa21
add _MACHINE and _MACHINE_ARCH, which are like MACHINE and MACHINE_ARCH,
...
execpt without quotes. meant to be __CONCAT()ted for easy #includes
of machine-dependent headers for MI code (e.g. for the MI ISA/EISA/PCI/TC
bus code).
1996-03-04 05:04:10 +00:00
1c5d7babe5
Clean up tabbing/spacing in defns of MACHINE, MACHINE_ARCH, and MID_MACHINE.
1996-03-01 23:30:08 +00:00
3d67685d36
Do not build vnode_if.[ch] for each kernel. Build them once, like the
...
various syscall sources/headers, and just compile them. From PR 2142, OK'd
by mycroft.
1996-02-29 20:54:58 +00:00
2ce52ae489
Define build programs with `?=', so they can be overridden with `makeoptions'.
1996-02-26 02:53:20 +00:00
a3a96d6af3
Another tweek to support libcompat.
1996-02-15 20:19:48 +00:00
2afc843cce
change _insque and _remque to match the prototypes in sys/systm.h.
1996-02-15 08:39:27 +00:00
5e7b18feac
Catch up with changes in the libkern and libcompat get $S ...
...
Comment out ns_cksum.c.
1996-02-15 08:37:56 +00:00
b3666297b1
Oops, meant to delete the declaration completely.
1996-02-12 21:28:18 +00:00
a9996b4780
pmap_page_index returns int
1996-02-12 21:27:32 +00:00
bf49f190a7
change pmap_page_index to return int
1996-02-12 21:19:13 +00:00
753fe3a25a
Fix mkdep problems due to missing flags.
1996-02-09 02:21:13 +00:00
28eae27187
correct prototype for cpu_fork
1996-02-05 20:33:37 +00:00
2c8314f73c
vm prototype changes
1996-02-05 02:06:38 +00:00
5bc076e17e
Use `-traditional-cpp' when building .s and .S files.
1996-02-03 00:43:50 +00:00
dcd66e9f4d
Clone these, and fix many bugs.
1996-02-02 20:08:17 +00:00
2dfbe4f961
Don't define _LOCORE here.
1996-02-02 20:05:08 +00:00
9db20bf150
Don't define _KERNEL here.
1996-02-02 19:42:08 +00:00
9d9a70a5a2
Fix #includes.
1996-02-02 18:05:36 +00:00
cec913603e
Don't special-case conf.c.
1996-02-02 13:38:05 +00:00
fc9d84fb46
assym.s -> assym.h
...
(Some ports did this already.)
1996-02-02 02:34:09 +00:00
88e512b693
LOCORE -> _LOCORE
1996-02-01 22:28:24 +00:00
5d2a046ccb
Update makefile to match recent pc532 MD changes, new config file.
1996-02-01 03:00:57 +00:00
54df7b2130
Updating DELAY and scncnputc.
1996-02-01 02:37:15 +00:00
63d5234cbf
Integration of many changes from Matthias Pfaller plus some of mine.
...
Several had: _MACHINE_ICU_H_ -> _NS32K_ICU_H_
cpu.h * Removed definition of cpu_swapout.
* Added definition of cpu_wait.
frame.h * added struct switchframe
icu.h * tweeked ints_off
param.h * More derived constants.
* Alot of things taken over from i386/include/param.h.
pcb.h * Removed pcb_flags (was unused) and pcb_pl.
The current priority level is now stored
in the switch frame by cpu_switch.
pmap.h * Taken over from i386/include/pmap.h.
psl.h * Add USERMODE definition
trap.h * T_INTERRUPT -> T_AST
types.h * Remove __FORK_BRAINDAMAGE
vmparam.h * Taken over from i386/include/vmparam.h.
Added definition of INTSTACK.
1996-02-01 00:03:25 +00:00
ccbcfbef91
Integration of many changes done by Matthias Pfaller with a few by me.
...
clock.c * Removed definition of DELAY.
intr.c * Removed an unneeded $Id:....$
locore.s * Moved some of the low level initialization
code to machdep.c.
* Defined proc_trampoline.
* Changed sigcode to pass scp to SYS_sigreturn.
* Changed copyin/copyout/fu*/su* to take advantage
of the ns32532's dual address instructions.
* Recoded copyinstr/copyoutstr/copystr in assembler.
* Added a new and faster version of bzero.
This makes bzero.s unnecessary.
* Defined suswintr to make profiling work.
* Recoded cpu_switch modelled after the i386
version of cpu_switch.
* Added support for lazy fpu state restore to
cpu_switch.
* Recoded trap handling code to be more readable.
* Added experimental code for single cacheline
invalidation.
machdep.c * Copied over cpu_startup from i386/i386/machdep.c.
* Changed sys_sigreturn to take advantage of the
argument passed by the trampoline code.
* Changed boot to call doshutdownhooks and to store
machine state in case of a panic.
* Changed setregs to clear the fpu registers.
* Recoded low_level_init. It's now called init532.
* cpu_reset: New function, resets the machine.
trap.c * Pulled over from i386/i386/trap.c.
* Added support for lazy saved/restored fpu state.
vm_machdep.c * Removed kstack double mapping by pulling over alot
of code from i386/i386/vm_machdep.c.
* Added support for lazy saved/restored fpu state.
* Moved freeing of process resources from cpu_wait
to cpu_exit.
* Pulled over cpu_coredump, pagemove, vmapbuf and
vunmapbuf from i386/i386/vm_machdep.c.
pmap.c * Pulled over from i386/i386/pmap.c.
genassym.c * Removed old and unused definitions, added new ones.
sys_machdep.c * Moved sys_sysarch from machdep.c to sys_machdep.c.
process_machdep.c * Changed to work without ktack double mapping.
* Changed to work with lazy saved/restored fpu state.
1996-01-31 21:33:42 +00:00
2ec27d30fe
Clean up of assembly files.
1996-01-26 08:11:46 +00:00
9b68d7d99e
Clean up of some assembly files.
1996-01-26 08:10:10 +00:00
6bffbf4ca9
New file needed for Matthias Pfaller rework of pmap.c to sync it with
...
the 386 version.
1996-01-26 08:06:40 +00:00
45d22f23ed
New file from Matthias Pfaller.
1996-01-26 05:37:16 +00:00
44f4a2f5e6
Update to Matthias' current state.
1996-01-26 05:12:58 +00:00
2a13a30e5e
Update from Matthias Pfaller. (Small tweeks.)
1996-01-26 05:04:12 +00:00
49d37e3c5d
Update to current state. No major changes.
1996-01-25 19:50:39 +00:00
85178bcc1b
Update a bit.
1996-01-25 19:36:36 +00:00
3789c88f95
Add doshutdownhooks().
1996-01-15 05:30:47 +00:00
57219ebad3
Remove vnode_if.[ch] during a "make clean", per PR#536 from
...
Dan Carosone <danielce@ee.mu.oz.au>.
1996-01-14 21:06:47 +00:00
5b39541e48
New generic disk framework. Highlights:
...
- New metrics handling. Metrics are now kept in the new
`struct disk'. Busy time is now stored as a timeval, and
transfer count in bytes.
- Storage for disklabels is now dynamically allocated, so that
the size of the disk structure is not machine-dependent.
- Several new functions for attaching and detaching disks, and
handling metrics calculation.
Old-style instrumentation is still supported in drivers that did it before.
However, old-style instrumentation is being deprecated, and will go away
once the userland utilities are updated for the new framework.
For usage and architectural details, see the forthcoming disk(9) manual
page.
1996-01-07 22:01:38 +00:00
2fce159ff8
Changed name of sigaltstack's ss_base field to ss_sp to match XPG4.2 and
...
traditional usage.
1996-01-04 22:21:33 +00:00
17eb6e2bc1
Move the old-style disk instrumentation "structures" to a central location
...
(sys/kern/subr_disk.c) and note that they should/will be deperecated.
1995-12-28 19:16:31 +00:00
cd8fe86bcb
Make the type of __builtin_va_list a long.
1995-12-26 01:16:24 +00:00
0c00214737
Use __builtin_va_alist.
1995-12-26 00:19:09 +00:00
fa887628d8
Stylistic changes.
1995-12-25 23:15:31 +00:00
d1de691efb
Stylistic changes.
1995-12-25 22:22:02 +00:00
0199e002ad
Update for GCC 2.7, and fix bugs.
1995-12-25 21:41:08 +00:00
292120bf63
Define __FORK_BRAINDAMAGE.
1995-12-09 04:41:41 +00:00
c13dbbd1b4
Update the To.Do list.
1995-12-07 07:55:11 +00:00
0cd793449e
merge in changes from 1.1 release branch
1995-11-30 00:56:23 +00:00
c9b339fcd1
Clean up deleted files.
1995-10-11 18:51:50 +00:00
fda13ac9c6
Clean up deleted files.
1995-10-11 05:28:06 +00:00
715002290d
remove old 1.0 distribution configs, tune 1.1 kernel configs.
1995-10-11 04:53:57 +00:00
326e5742ac
Disable interrupt to avoid a bug. This makes the "new ncr" driver
...
stable enough to use in the distribution. We still need to find out
where the bug is when interrupts are enabled.
1995-10-10 08:08:01 +00:00
245f292fed
Prefix names of system call implementation functions with `sys_'.
1995-10-07 06:25:19 +00:00
c9836835f4
Make it as lean as possible.
1995-09-29 04:16:48 +00:00
d7992eb61f
Update to correct load address.
1995-09-28 08:13:29 +00:00
03fa08025b
Major update: Many changes from Matthias Pfaller.
...
* conf/DEFAULT: new file, default install kernel
* conf/INSTALL: +MSDOSFS, +NO_INLINE_SPLX, +RD_SIZE=2mb, +scn4/5
* conf/KLONDIKE: cosmetic changes
* conf/STEELHEAD: cosmetic changes
* conf/files.pc532: rd got a file of it's own
* dev/lpt.c: changes to support lower interrupt latency, packet input/output
is now done at spl0
* dev/ncr.c: changes to support the most recent atari version of the ncr5380
driver
* dev/ncr5380.c, dev/ncr5380reg.h: upgraded to most recent atari version,
memcpy -> bcopy.
* dev/rd.c: ramdisk driver
* dev/scn.c: by patching scndefaultrate, the kernel's default baud rate can
be changed with gdb
* include/psl.h: struct iv now protected by !LOCORE && _KERNEL
inlining of splx can be prevented with new kernel option NO_INLINE_SPLX
splx_di is like splx but leaves processor interrupts disabled
* pc532/autoconf.c: cosmetic changes
* pc532/conf.c: with rd entries
* pc532/intr.c: changes to support splx_di
* pc532/locore.s: ramdisk is no longer initialized
not splx, but rett is now used to reenable CPU interrupts when leaving the
interrupt service routine. This is necessary to prevent recursive interrupts.
* pc532/sys_machdep.c: memcpy -> bcopy
* pc532/mem.c: moved ramdisk to dev/rd.c
* stand/Makefile: boot is now loaded at 0x3eb800 instead of 0x363800
Use current form of libsa and libkern.
* stand/inflate.c: emit twiddle every 8k and not every 1k
* stand/rd.c: ramdisk starts at 0x288000
1995-09-26 20:15:57 +00:00
7ed7d6148f
Move the C struct to the properly protected place.
1995-09-22 23:19:30 +00:00
c9dfdd20b6
Compile the kernel with -Werror and -fno-builtin.
1995-09-19 23:48:41 +00:00
7d7396c414
Make system calls conform to a standard prototype and bring those
...
prototypes into scope.
1995-09-19 22:53:47 +00:00
29053c58b2
SA_ONSTACK --> SS_ONSTACK
1995-09-01 20:05:59 +00:00
f9399fadc7
add option CON_BRK_PANIC to be able to force a panic by 3 consecutive
...
breaks without any input on the console port.
1995-08-30 23:51:40 +00:00
022e1038fd
Use pc532 specific in_cksum.c.
1995-08-29 22:48:02 +00:00
3564c1fcc2
More changes to ncr driver to try to get it working. (From Matthias Pfaller)
1995-08-29 22:44:27 +00:00
d9c05825be
Changes for gdb from Matthias Pfaller.
1995-08-29 22:37:41 +00:00
f2d39a40d1
Changes for new INSTALL generic kernel and compressed kernel boot.
1995-08-29 21:55:39 +00:00
6a179f1f2e
VOID minphys.
1995-08-27 04:07:53 +00:00
389484fe28
New kernels from Matthias Pfaller and addition of oldncr driver.
1995-08-25 07:58:21 +00:00
441cd76f8f
Changes by Matthias Pfaller for generic support and dumping.
1995-08-25 07:52:18 +00:00
0a3111b255
Various changes (from Matthias Pfaller) including support for a
...
more generic distribution kernel and dumps.
1995-08-25 07:49:04 +00:00
47ff5d6b3d
More changes to the "new" ncr interrupt driven scsi driver (from M. Pfaller)
...
Bring back the old polled driver until a kernel built with the interrupt
driven one is stable enough for production use.
1995-08-25 07:30:33 +00:00
66dcd8fd69
Add entries for the ccd.
1995-08-17 17:40:42 +00:00
6cc376290b
Replace splnet() with splsoftnet(). Add splnet().
1995-08-13 00:27:11 +00:00
80d7b0695a
minphys() functions really should return void.
1995-08-12 20:30:45 +00:00
dad0b0a94c
Work towards getting gdb working by Craig Ruff.
1995-07-28 08:00:17 +00:00
cb8805b840
Work toward making gdb work by Craig Ruff.
1995-07-28 07:51:38 +00:00
ffe4785a58
update SCSI minphys routines' definitions to match standard minphys()
...
definition and usage.
1995-07-24 07:33:32 +00:00
479fb9e45b
add <sys/cdefs.h> inclusions. namsspace-protect physadr, label_t
...
def'ns against _POSIX_SOURCE and _ANSI_SOURCE.
1995-07-06 03:39:32 +00:00
da3602a73e
Add code to softnet to call pppintr.
1995-07-04 12:19:07 +00:00
7263209ce6
Make each disk and tape driver define its own read and write functions.
...
Deprecate rawread() and rawwrite() completely. Remove d_strategy from cdevsw to
force the abstraction barrier.
1995-07-04 07:15:28 +00:00
c83f9c5568
remove unused cpu_exec() definitions. moved "broken swap" markers, for
...
ports that still need it, to types.h.
1995-06-28 02:55:18 +00:00
ad4af073cd
Updates from Matthias Pfaller. (leo@marco.de)
1995-06-26 23:13:54 +00:00
2d49c3885b
clean up definitions of ctod(), dtoc(), ctob(), btoc(), btodb(), and
...
dbtob(). remove unused definitions of ctos(), stoc(), and dtob().
1995-06-26 06:55:38 +00:00
1c0be437b1
define __BDEVSW_DUMP_OLD_TYPE for ports where it's true. clean up
...
some m68k ports inclusion of common header.
1995-06-26 05:13:37 +00:00
98df248f95
Makefile.`arch`: - Add -lcompat
...
- Change clean: target to be a double dep one,
so libraries can use the clean target too
- Add genassym to the clean targets
1995-06-24 20:46:09 +00:00
55fbbc705d
Wrap with #ifndef _XXX_FLOAT_H_/#define _XXX_FLOAT_H_/ ... /#endif.
1995-06-20 20:45:22 +00:00
1d65cdd4ab
#include <sys/cdefs.h>.
...
Wrap __flt_rounds() declaration with __BEGIN_DECLS/__END_DECLS.
1995-06-20 20:32:22 +00:00
2f62eae02d
Checkpointing ... still has a couple of problems but it is better.
...
(include/{icu.h,psl.h} should be listed as part of this checkpoint.)
1995-06-18 07:18:02 +00:00
8142065452
Updating to be like i386 version.
1995-06-18 07:13:46 +00:00
9999c610fb
Updated To.Do
1995-06-09 06:03:45 +00:00
36c6fc31be
Various updates for the new NCR scsi driver and tweeks to the interrupt
...
code. (From Matthias Pfaller)
1995-06-09 05:59:56 +00:00
a8674363a7
Replacement of the NCR driver by the Leo Weppelman NCR driver as
...
ported by Matthias Pfaller (Thanks to both!) and a RCS id.
1995-06-09 04:36:14 +00:00
f90f8d10aa
Removing -DKERNEL, transition to _KERNEL has been completed
1995-05-16 22:24:17 +00:00
29db7c74b1
Changes from Matthias Pfaller: lpt driver changes, clock code similar
...
to i386, interrupts from static table to dynamic table, other small
fixes (locore.s byte operates -> double operands ...)
1995-05-16 07:30:30 +00:00
8aa6c376b6
KERNEL -> _KERNEL
1995-05-11 16:52:54 +00:00
fae7c89fdd
RCS id/header cleanup.
1995-05-08 19:37:45 +00:00
8703076975
define BROKEN_SWAP and/or cpu_swapout as appropriate.
1995-05-05 03:41:51 +00:00
c075955b09
kill historical cruft
1995-04-29 01:56:59 +00:00
ac3b1189c1
ns32k specific portions of ieeefp.h (fp_rnd, fp_except, constants, etc.).
1995-04-28 22:01:25 +00:00
7fea99983f
Changed FLT_ROUNDS from constant to a call to __flt_rounds(), so that the
...
current rounding mode is accurately reported.
1995-04-28 21:58:57 +00:00
0e59975fac
rename files files for new config/config.old naming
1995-04-28 08:19:12 +00:00
b9c4f23337
needs-count => needs-flag
1995-04-27 07:26:08 +00:00
042a0e2c63
remove warnings in pmap.c
1995-04-27 07:19:09 +00:00
83e651c4c4
scntty & reorg using softc stuff.
1995-04-27 07:18:02 +00:00
a186461a00
conf.c: ptstty ...
...
machdep.c: setregs parameter type change, remove warnings
process_machdep.c, pmap.c : remove warnings
1995-04-27 07:16:31 +00:00
de42a28a1b
- added sunos_machdep.c for sun3, atari, amiga and mac68k.
...
- changed machdep.c and trap.c to use struct emul.
- remove ep_setup references.
- added struct emul to all emulations.
1995-04-22 20:24:40 +00:00
83d1965cc0
Remove the "#if 0" around vfs_unmountall().
1995-04-21 20:20:15 +00:00
c42a783b23
Add scncnpollc.
1995-04-21 18:36:32 +00:00
6fbf1113f7
Fix a mycroft typo.
1995-04-20 07:16:30 +00:00
4439f3b5f6
Remove deprecated prober/probew/kernacc/useracc.
1995-04-11 20:01:43 +00:00
df78dbb096
Reference cninit.c as well as cons.c
1995-04-11 09:52:11 +00:00
e25c1817cf
kernel_pmap --> pmap_kernel()
1995-04-10 13:08:28 +00:00
22cefc03bc
Bring back pmap_kernel(), for now always inlined as a pointer to
...
kernel_pmap_store.
1995-04-10 12:41:29 +00:00
127e0761c9
Add mmopen(), mmclose(), and mmmmap() where appropriate. Lock vmmap when
...
needed. Make types consistent.
1995-04-10 11:54:47 +00:00
d751b03236
Minor consistency nits.
1995-04-10 10:01:40 +00:00
7e450d5085
device.h is defunct.
1995-04-10 07:50:42 +00:00
14241df959
Update for conf.h.
1995-04-10 07:43:49 +00:00
71ab4ed9dc
KERNEL -> _KERNEL
1995-03-28 18:13:48 +00:00
fa2133533d
invoke ktrsyscall with (vp, code, argsize, args) as args.
1995-03-26 08:03:29 +00:00
f86410093b
Changed name of __weak_reference() to __indr_reference(). They really
...
are indirect references, and I want to add a real __weak_reference()
macro to <machine/cdefs.h> soon.
1995-03-23 19:58:48 +00:00
d57fb977bb
Added -D_KERNEL to CFLAGS alongside each -DKERNEL.
1995-03-23 19:46:18 +00:00
b8403d582b
don't be so quick to cast macro arguments to unsigned; if the
...
arguments are really off_t's (e.g. to btodb), then you can lose
information. This was the "> 4G file systems don't work" bug; physio
uses btodb, which was broken.
1995-03-18 07:22:43 +00:00
2f805fa51b
copy*str() should use size_t.
1995-03-09 12:05:21 +00:00
4c34be6b52
Clean up deleted files.
1995-03-01 00:00:00 +00:00
3a293934a9
Increase the VM limits and initial sizes limits.
1995-02-14 18:52:29 +00:00
ef1389111f
Do what it takes to make vnd a swap device :)
1995-02-12 03:53:45 +00:00
5b95a4a41e
Fix from Matthias for device closing.
1995-02-08 17:45:09 +00:00
255317cd59
Update it!
1995-02-03 18:34:11 +00:00
830a53e394
ANSI says that <stdarg.h>'s va_end macro must expand to a void expression.
...
For consistancy, I'm changing <varargs.h> too.
1995-01-28 01:51:46 +00:00
b56a5f27d4
add 'maxpartitions' keyword as first 'intesting' thing in the file, to
...
facilitate the solution of config.new's hardcoded partition number
problems.
1995-01-25 20:45:33 +00:00
4cc138dd7a
vn -> vnd renaming, for consistency
1995-01-25 05:34:51 +00:00
2ef4ca1f3d
vn -> vnd renaming, for consistency
1995-01-25 04:48:07 +00:00
0c91149a15
Do a shorter cache invalidate. (from Matthias)
1995-01-22 07:06:48 +00:00
381715c52f
Clean up deleted files.
1995-01-19 07:03:40 +00:00
8579e47846
move nncr.c -> ncr.c, nscn.c -> scn.c
1995-01-19 07:03:35 +00:00
770fe02aad
change file names in clean for config.new. (nncr.c -> ncr.c, nscn.c -> scn.c)
1995-01-19 07:02:31 +00:00
9540190d45
This file, which will be included by <sys/cdefs.h>, will contain macros
...
such as __warn_references() and __weak_reference() which are actually
machine dependant. This will make it easier for ports that are being
bootstraped with ELF and ECOFF based toolchains.
This change also introduces a new macro, _C_LABEL(x). _C_LABEL expands
its argument, an identifier, to a character string of the identifier
name as it is represented in an object file.
For most ports, _C_LABEL(x) will expand to "_x", for ELF based ports
_C_LABEL(x) will expand to "x".
1995-01-19 01:38:36 +00:00
3b18e56333
Add the fast console ram disk config.
1995-01-18 22:18:00 +00:00
16489b2c3a
Clean up deleted files.
1995-01-18 08:17:23 +00:00
9ac887e591
Move to config.new (get ram disk working correctly), add lpt driver.
1995-01-18 08:14:29 +00:00
dcb56cc3c5
Move to config.new, add lpt driver.
1995-01-18 08:13:29 +00:00
d7a8b2964f
Only define sig_atomic_t when _ANSI_SOURCE is defined.
1995-01-10 19:01:00 +00:00
053d0c603b
add xs->resid = 0; to ncr5380_scsi_cmd().
1995-01-09 08:18:43 +00:00
4372c10cea
Fix the inittodr bug.
1995-01-02 04:20:58 +00:00
191f87cc1e
the lpt driver by Matthias Pfaller.
1994-12-30 07:31:27 +00:00
f082f22fee
type on microtime and remove printf in dk_establish.
1994-12-30 05:09:00 +00:00
7fd629ada2
First try at catching up with generic scsi code.
1994-12-30 01:40:01 +00:00
0ad6b56de9
Fix it to work correctly with weird structures.
1994-12-29 19:43:52 +00:00
befb0a21f3
add tun device.
1994-12-22 08:33:41 +00:00
87efeb2886
cache flushing changes, core dump changes
1994-12-22 03:24:07 +00:00
83c5692e19
Move to config.new, genassym static
1994-12-22 03:23:20 +00:00
e5049f4d59
make the definition of _JBLEN mach. dep. header-dependent.
1994-12-20 10:36:27 +00:00
2fc0cde6e2
get "make depend" working.
1994-12-16 18:00:36 +00:00
d42a8b725e
Remove extra arg to d_open.
1994-12-14 19:10:08 +00:00
cef7e3d0dc
Changes from Matthias P.
1994-12-09 21:04:40 +00:00
008d895ed1
config.new changes and sendsig change.
1994-12-05 19:27:38 +00:00
51aa2cad2b
USPACE change.
1994-12-05 19:27:20 +00:00
dedd59e3c2
Twiddles to ge config.new working.
1994-12-05 19:26:56 +00:00
0503a7c8a8
Fixed a bug in resettodr that set the month to 13 in the hardware clock!
1994-12-05 19:14:27 +00:00
40abc70ce2
changed open prototype
1994-11-14 05:55:23 +00:00
dafacba9d5
new RCS ID format.
1994-10-26 08:23:50 +00:00
97ad3ec4b8
fixes from Matthias. splimp and other stuff.
1994-10-21 07:03:57 +00:00
d4bf824ec2
update for new syscall args description mechanism
1994-10-20 05:17:21 +00:00
20cb927177
add timezone support to inittodr (thanks to Phil Budne)
...
add a working resettodr (ditto)
rcs header
1994-10-19 17:15:16 +00:00
matthias