59ffb0612b
Merged in latest KGDB changes from Wolfgang Solfrank.
1996-10-15 02:11:31 +00:00
4b88966792
Merged in the KGDB changes to locore.S from Wolfgang.
...
Added the functions atmoic_set_bit() and atomic_clear_bit() that
can be used for setting and clearings bits atomically (need interrupts
to be turned off).
1996-10-15 02:10:17 +00:00
b24dfb3713
Removed dead kernel stack debugging code from the days when we had
...
a double mapped stack.
Guard the SVC32 and UND32 mode stack check code with #ifdef
STACKCHECKS.
1996-10-15 02:07:08 +00:00
febe210c2f
Call mcount() from bcopy() and memcpy() is GPROF and PROFILE_ASM are
...
defined.
Replaced references to r14 with lr.
1996-10-15 02:04:40 +00:00
dab3173f56
Not needed as the assembly stub for mcount() is defined in
...
machine/profile.h
1996-10-15 02:00:47 +00:00
ec238c0c33
The bcopy_page() and bzero_page() functions now call mcount() if
...
GPROF and PROFILE_ASM are defined.
Register usage has been changed to avoid using r11. This means we have
one less register to save during this function.
1996-10-15 01:52:01 +00:00
8850151b06
Removed file arch/arm32/arm32/scratch.S
1996-10-15 01:45:17 +00:00
083ff3dd3d
Dead at last.
...
The functions in this file are either dead, have been rewritten or have
found proper homes (like fusu.S).
1996-10-15 01:45:04 +00:00
55db7609fb
Remove the definition of cdev_uk_init() as this is done in <sys/conf.h>
1996-10-15 01:42:18 +00:00
58e481e13b
Call mcount() for all fpe core entry points if GPROF and PROFILE_ASM
...
are defined.
Switch to SVC32 mode before delivering FP exceptions and switch back
to UND32 mode afterwards before exiting.
1996-10-15 01:37:50 +00:00
ad466c40e1
If CPU_SA110 is define adjust the traceback PC values by 4 as the
...
StrongARM stores PC+8 on STR and STM instructions rather than PC+12.
1996-10-15 01:33:50 +00:00
24e50982df
Report the core identity string now available from the core header when
...
booting.
After assembling the post FP processing callback branch call
sync_icache() if CPU_SA110 is defined.
Return a valid signal code when raising a SIGFPE exception so
the cause of the SIGFPE can be determined.
Added the functions arm_fpe_getcontext() and arm_fpe_setcontext()
to obtain the FP context in a FPE independant form for the ptrace()
syscall.
1996-10-15 01:31:28 +00:00
407ce69224
Use tlb_flush() rather than tlbflush().
...
In db_write_text() call sync_caches() after modifing the text area
if CPU_SA110 is defined.
Added a new machine command "frame" to print out a trapframe.
Trap the kernel break point instruction specifically and panic on
any other undefined instruction being executed in SVC mode.
1996-10-15 01:24:48 +00:00
e3c0a41e67
Added machine command to print a trapframe.
1996-10-15 01:23:36 +00:00
804b62c479
Major code clean up.
...
Removed a load of old debugging code that has served it purpose.
1996-10-15 01:20:48 +00:00
578797208e
In the function fetchuserword() call mcount() on function entry if
...
GPROF and PROFILE_ASM are both defined.
Fixed a bug in suswintr() and susword() that caused the value written
to be trashed.
1996-10-15 01:17:59 +00:00
695e09b29a
Added generic support for the ARM7500 cpu rather than just the RC7500
...
motherboard.
Cleaned up a lot of code to match KNF.
When the device is attach the vidc refclk frequency is reported along
with the amount of video memory and the type.
1996-10-15 01:15:24 +00:00
7d0bc8682c
Recognise the ARM32_SYNC_ICACHE option to sysarch() syscall and call
...
sync_icache() to garentee any instruction cache the CPU may have is
in sync with the data cache and main memory.
1996-10-15 01:12:02 +00:00
7cfe42e258
Overhauled and fixed teh console blanking code. Things no longer
...
go wrong when console blanking occurs while X is running.
The blanktime ioctl now allows blanking times to be set, force
immediate blanking or diable blanking on a per virtual console basis.
Updated the console version number to revision D.
1996-10-15 01:10:06 +00:00
be9a8e231a
Removed the function vidc_col() as this has been guarded with #if 0
...
for a long time now as the function was replaced with a macro.
1996-10-15 01:05:04 +00:00
ea88364d7f
Tidied up the comments.
...
Call the Debugger from the diagnostic code if userret() finds itself
at an spl level other than SPL_0.
1996-10-15 01:04:27 +00:00
04c5783fb7
Call mcount() on function entry if GPROF and PROFILE_ASM are both defined.
1996-10-15 01:00:29 +00:00
a2a2b693c8
Removed a load on unused code that has been hiding here.
...
The functions vidcconsolemc_render() and vidcconsolemc_cls()
will call mcount if GPROF and PROFILE_ASM are both defined.
1996-10-15 00:55:26 +00:00
c90d8612e7
General code cnd formatting clean up.
1996-10-15 00:52:21 +00:00
0d48d902ea
New build of the ARM FPE core. The core header now has a version
...
number field and an core identity string pointer.
Labels are now defined for all the entry points in the core header
structure so that the linker can relocate the branches to the core.
The core entry points are now branch instructions relative to the
start of the core so the address of the core function does not have to
be calcuated are call time.
1996-10-15 00:49:10 +00:00
ed4a15bc3d
Added prototypes for tlb_flush(), cache_clean(), sync_caches() and
...
sync_icache().
Removed prototype for memset().
Added prototypes for atomic_set_bit() and atomic_clear_bit().
1996-10-15 00:44:58 +00:00
a6bf04810f
Include <machine/fp.h> and <machine/reg.h>
...
Define the two new fields added to the FPE core header in
the arm_fpe_mod_hdr_t structure.
Added prototypes for arm_fpe_getcontext() and arm_fpe_setcontext().
Updated the prototypes for arm_fpe_core_loadcontext() and
arm_fpe_core_savecontext() to pass a fp_context_frame pointer.
1996-10-15 00:42:46 +00:00
fcc485e573
Define a separate set of irq numbers for ARM7500 machines if RC7500 is
...
not defined as the ARM7500 in A7000 machines has different interrupt
numbers than the ARM7500 in RC7500 machines.
1996-10-15 00:39:23 +00:00
796814b9e9
Added -Wcomment to the CPPFLAGS.
...
Added -Wreturn-type to the CWARNFLAGS.
Make dependancies for makemodes.
1996-10-15 00:35:48 +00:00
4d21960d40
Added checks for illegal combinations of CPU_ARM6, CPU_ARM7, CPU_ARM7500,
...
CPU_SA110 and CPU_LATE_ABORT.
Updated the CLKF_INTR() macro for changes made to the interrupt system.
Updated some of the CPU ID codes.
Added the CPU ID for the ARM8.
1996-10-15 00:33:03 +00:00
7e836e3676
splsoftclock() is now a macro rather than a function.
1996-10-15 00:26:46 +00:00
3f12639e0e
Added options EXEC_AOUT and EXEC_SCRIPT.
1996-10-15 00:25:45 +00:00
25d5efdd4f
Updated to match reality.
1996-10-15 00:23:51 +00:00
478a722a54
New configuration file for RiscPC's with StrongARM CPUs (SA-110) rather
...
than an ARM6 or ARM7.
1996-10-15 00:22:58 +00:00
b352e3549b
Updated fpreg_t to match changes made to fp.h
1996-10-15 00:21:36 +00:00
f930769a2b
New configuration file.
...
This is for an Acorn A7000 machine with an ARM7500 CPU and no VRAM.
This config should also work for other ARM7500 machines with an
architecture that matches Acorns.
1996-10-15 00:21:06 +00:00
7e6df6c20e
Added a typedef for fp_extended_precision_t.
...
Make fp_reg_t a typedef of fp_extended_precision_t.
Rename the fp_state structure to fpe_sp_state as it describes
the single precision FPE state held in the pcb and is internal to the
kernel.
Define a new fp_state structure that is for user access to the fp
state (e.g. via ptrace()).
1996-10-15 00:15:37 +00:00
a7c2e7f767
Use tlb_flush() rather than tlbflush() in the pmap_update() macro.
1996-10-15 00:09:09 +00:00
c544086b51
Initial commit of the Connect32 SCSI driver. This driver uses the esc
...
generic driver.
Currently this is only a polling driver.
1996-10-15 00:08:43 +00:00
b4c38ce254
Define the FP exeception types.
...
Use these types to create the bit values used for fp_except values.
1996-10-15 00:06:47 +00:00
43fce8325b
Initial commit of the esc generic SCSI driver code. This is a driver for
...
the AMD AM53CF94 Enhanced SCSI Controller. The code is based on the
SFAS216 driver as these chips are very similar. There are several
differences but more will follow.
1996-10-15 00:05:04 +00:00
c5246aee6a
Updated the typedef for undef_handler_t to have a 4th argument. This
...
argument is a fault code integer.
1996-10-15 00:00:44 +00:00
bc6649505b
Add definition of configuration register B.
1996-10-14 23:57:11 +00:00
8b97be16ab
Include podules.h for definitions of manufacturer and podule ids.
...
Use definitions from this file for match_podule() rather than hardcoded
values.
Added packet filter support.
1996-10-14 23:55:01 +00:00
91de56b1b6
Include podules.h for definitions of manufacturer and podule ids.
...
Use definitions from this file for match_podule() rather than hardcoded
values.
Added a routine asc_minphys() in preparation for driver changes when on
card DMA support is added.
1996-10-14 23:53:58 +00:00
56250a75b0
Include podules.h for definitions of manufacturer and podule ids.
...
Use definitions from this file for match_podule() rather than hardcoded
values.
Reset the interface following a bad packet. This fixes some jams when
the driver failed to recover properly after a bad packet.
1996-10-14 23:50:20 +00:00
ce36c22380
Include podules.h and use the manufacturer and identities defined there
...
for calling match_podule() rather than using hardcoded values.
1996-10-14 23:42:17 +00:00
a7c4273ef8
Fix comments.
1996-10-14 23:35:41 +00:00
b7b4a80fa1
Remove old-style disk instrumentation.
1996-10-14 23:31:29 +00:00
cb1d61078c
Use tlb_flush() rather than tlbflush().
1996-10-14 23:29:47 +00:00
9d8ffb415e
Removed all the podule manufacturer and id structures and included
...
podule_data.h instead.
Removed the dead function find_podule().
The 0xf5 entry in the podules chunck directory is now searched for and
the podule description associated with this entry is placed in the
description field of the podule structure.
Generally tidied up all the comments.
1996-10-14 23:26:48 +00:00
ccdc440eac
Added a description field to the podule structure. This is filled in
...
at config time with the podule description (if any) that is extracted
from the podule ROM.
1996-10-14 23:21:22 +00:00
7e9e37b0bf
Sync with master podule list.
1996-10-14 23:17:09 +00:00
1698c1854e
Initial commit of master list of podule manufacturers and ids along
...
with tools for building podules.h and podule_data.h from this file.
1996-10-14 23:16:07 +00:00
159f169ad4
Added support for the ARM7500.
...
Added comments to relate #ifdef and #endif
1996-10-14 23:05:34 +00:00
9ddac81db7
Added definitions for evaluating the signal code argument.
...
Currently the code field is only valid for SIGFPE, SIGBUS and SIGSEGV.
1996-10-14 23:02:53 +00:00
06083cc7b9
Updated #ifdef to reflect filename change.
1996-10-14 22:57:37 +00:00
f0137e2cc0
At last, a version of profile.h that works properly and allows kernel
...
profiling.
Define an all assembly mcount stub routine and make sure r0-r3 and lr
are preserved.
1996-10-14 22:52:49 +00:00
cae31931a9
Initial commit of header file defining various traps.
...
Define a user breakpoint trap.
1996-10-14 22:49:23 +00:00
f24b0a3f91
Initial commit of the header file defining the architecture specific
...
syscalls.
Declare ARM32_SYNC_ICACHE call that ensures that main memory and any
instruction cache are in sync.
1996-10-14 22:47:31 +00:00
135f110149
Added an ioctl acknowledgement bit to the buffer record flags field.
...
Added a new ioctl to select either relative or absolution mouse position
reports.
1996-10-14 22:41:59 +00:00
44faa9154f
Added a blanktime field to the vconsole structure so the blanktime time
...
is managed per virtual console rather than globally.
1996-10-14 22:35:03 +00:00
c4d76a3f02
Added a field for cpu specific data in the cpu_t structure.
1996-10-14 22:32:45 +00:00
60c2014d86
Added magic number of bootconfig structure passed from the bootloader.
...
Added a field for the physical address of the display memory used
by the bootloader if VRAM is not fitted.
Declare the boot_args variable extern here.
1996-10-14 22:30:19 +00:00
d7004d5a55
Commit of notes on interrupts and their usage.
1996-10-14 22:27:03 +00:00
114e806627
Added note that the current development history can be found
...
on source-changes.
1996-10-14 22:23:50 +00:00
2c6e3deb80
Not needed as this file has been merged into the main TODO list.
1996-10-14 22:22:12 +00:00
77cd383ae6
Updated. Now includes things that I hope users will work on as well.
1996-10-14 22:21:15 +00:00
d2daeab10d
Garbage collect the "kernel jump to zero" stuff. VA 0 is now invalid,
...
so the kernel will fault if the PC gets trashed like that.
1996-10-14 22:11:16 +00:00
ac35089824
Couple of small changes:
...
- Fix up usage of MBD_ISPID().
- Ensure that we never deal with a NULL proc, and if our proc has
no pcb, punt. Suggested by Gordon Ross.
- Eliminate some redundant NULL pointer checks in the T_MMUFLT cases;
proc0.p_addr is now initialized early, and we make a single test
for sanity at the top of trap() now.
1996-10-14 20:06:31 +00:00
a72edba413
Couple more small changes:
...
- Initialize proc0.p_addr just after setting up the kernel stack, to avoid
getting NULL pointers in trap(). Change suggested by Gordon Ross.
- Panic if main() returns.
- Tidy up a couple of comments.
1996-10-14 20:02:48 +00:00
8c0a8c37fe
KNF patrol.
1996-10-14 18:40:15 +00:00
19c816fd6b
Delete #ifdef'ed-out TC support (for 5000/200).
1996-10-14 17:28:46 +00:00
f2c95d6cce
Use kernel driver for serial console. PROM console output no longer used at all.
1996-10-14 17:15:42 +00:00
ffc4c833ea
Be careful not to deref bad pointers in the MMU fault handler! (yow!)
1996-10-14 08:07:23 +00:00
7744dc270c
Couple of small changes to how kernel is mapped:
...
- kernel text is now always read-only.
- page 0 is invalid.
1996-10-14 08:05:37 +00:00
4fa7362d31
Add a db_memrw.c that understands how to write to read-only kernel text
...
(remaps page read/write/cache-inhibit, does write, restores previous
mapping). Kernel text no longer needs to be read/write with DDB/KGDB
is in the kernel.
Based on a similar module written for the Sun3 port by Gordon Ross,
and modified somewhat by me.
1996-10-14 08:02:27 +00:00
5b66e34d14
A few small changes:
...
- Offset kernel text one page. Stash the PA of this offset page for
use later.
- Add a few comments.
- Free up some registers earlier in the initialization process.
- Use a `prototc' to set the Translation Control register, rather
than relying on a2 pointing just past the MMU trampoline in the
high page. (Suggested by Charles Hannum.)
- Set VBR to the kernel vector table just before turning on the MMU.
- Just before rebooting, set VBR to 0, which is what the BOOTROM expects
it to be.
1996-10-14 07:58:54 +00:00
27f386f5b2
Garbage collect some now unneeded code, and declare the punit device
...
driver entry point switch.
1996-10-14 07:34:48 +00:00
415248a4f2
Move the machdep_start() code into machdep.c. No need for different
...
versions of this function anymore, now that we have a sane kernel setroot().
1996-10-14 07:33:43 +00:00
18c2b0460a
Garbage collect some hackish code that was needed when we had a lame
...
kernel setroot(). The device type for network boot is set like any
other device now. Also, call the punit entry point for device drivers
to properly set `bootdev'.
1996-10-14 07:31:47 +00:00
9ff0348a49
Implement ctpunit(), a "set physical unit" entry point.
1996-10-14 07:29:57 +00:00
9d51a5dcf7
Add a standalone driver entry point that sets the physical unit (HP-IB's
...
equivalent of a LUN) in `bootdev'. This is needed to properly detect the
boot device if booted from the tape unit of an HP-IB disk/tape combo.
1996-10-14 07:29:15 +00:00
84da57f13b
Clean up the code that sets `bootdev' based on information provided
...
by the BOOTROM. Also, give network devices the attention they deserve.
1996-10-14 07:26:06 +00:00
23640d012f
New root device detect/set code, lifted mostly from NetBSD/alpha.
...
The "options GENERIC" entry in kernel config files is not longer necessary
for "swap generic" kernels. Uses new config constructs which work with
some glue in an old config environment. This code will support new config
with minimal changes.
1996-10-14 07:20:26 +00:00
8acf9f0215
Set the device class on non-dull devices. This is a transitional thing.
1996-10-14 07:14:11 +00:00
7d13691de1
Add some new config glue to the legacy hp300 device structures. This is
...
a transitional thing.
1996-10-14 07:11:50 +00:00
01d74572dd
Default the HIL keyboard to "US ASCII". This should fix a bug where
...
an unrecognized keyboard produced garbage on keypresses in the kernel,
but worked in the boot program (which has this default). The bug is
that the keymap pointers are unitialized.
1996-10-14 07:09:41 +00:00
534c6caa6b
Add EXEC_AOUT and EXEC_SCRIPT
1996-10-14 07:01:10 +00:00
7ee4744ed2
Need to include <sys/exec.h>.
1996-10-14 06:51:50 +00:00
9d781ce37f
Back out second inclusion of <sys/poll.h> from duplicated poll(2) changes.
1996-10-14 04:55:26 +00:00
02fb4a1255
Back out previous revision's change to use mips family-independent locore
...
initialization.
Locore doesn't (yet) set up cpu_id early enough for mach_init() to use it.
1996-10-14 04:31:57 +00:00
b4355fb150
More fallout from printf->kprintf->printf: printf in sys/systm.h now
...
conflicted with stdio.h. Get rid of sys/systm.h, as it isn't needed.
1996-10-14 03:04:32 +00:00
be3a168305
Removed stray ";" so conditional return is really conditional. Fixes
...
autoconfig display for xcfb.
1996-10-14 01:39:57 +00:00
27ec6276b8
Rename mips CPU-family locore prefixes for case-consistency:
...
mips_r2000_, mips_R2000_ -> mips1_
mips_r4000_, mips_R4000_ -> mips3_
(which are also, for mnemonic reasons, consistent with gcc flag usage,
rather than using mipsI_ and mipsIII_).
1996-10-13 21:37:35 +00:00
bc4aec6c5b
Fix error from in_addr_t changes by christos: htonl() takes in_addr_t
...
parameter, not in_port_t.
1996-10-13 20:59:02 +00:00
01565a3ced
typedef, not typeded
1996-10-13 19:57:59 +00:00
77483f297b
increment cnt.v_intr for I/O device and clock interrupts
1996-10-13 19:57:49 +00:00
05d14bf764
catch up with Jason's changes
1996-10-13 18:28:49 +00:00
ad67e04154
backout previous kprintf change
1996-10-13 16:50:51 +00:00
65e53018c2
Fix an error message, and extend it to indicate possible workarounds.
1996-10-13 13:39:52 +00:00
8b2066b7ad
Remove sys/arch/pmax/pmax/{locore.S,trap.c}.
...
Use versions from sys/arch/mips/mips instead.
1996-10-13 13:24:48 +00:00
4be3cd1350
Remove pmax/tc/if_le.c. Superseded by sys/dev/tc MI TC/ioasic lance drivers.
1996-10-13 13:18:06 +00:00
23ad284399
Remove obsolete `#include <machine/MachConst.h>'.
...
Where CACHED_TO_HYS() is still needed for kernel-virtual-to-physical
or physical-to-uncached mapping (fb drivers), replace with
`#include <mips/cpuregs.h>'.
1996-10-13 13:13:50 +00:00
0c048bf278
poll(2) changes for rcons, pmax framebuffer hardware-independent layer.
1996-10-13 12:47:55 +00:00
1f97bf2ceb
Update SCCS id to 4.4-lite2. We already had lite2 tz.c changes from
...
Raph Cambpell.
1996-10-13 12:34:20 +00:00
e1a0a7fc77
Split dcparam() into two parts:
...
* dcparam() with normal tty t_param interface, which calls
* cold_dcparam() called with explicit dc7085 register address
and flags, which does the work and is also callable when cold,
to set up console (or kgdb) line parameters.
1996-10-13 12:25:50 +00:00
04cc01fd56
Commit arch/pica/pica/pmap.c changes from August 1996:
...
* use mips_round_page,mips_trunc_seg() instead of
pica_round_page(),pica_trunc_page().
* discard (unused) return value from TLBUpdate(), and delete
(unused) temporary variable used to hold it.
1996-10-13 11:39:52 +00:00
fba8024a86
Add (missing) PAGE_IS_RDONLY() macro to test for readonly pages,
...
in both mips-I and mips-II versions, and use it in arch/mips/mips/trap.c.
1996-10-13 09:54:39 +00:00
6ac1fdec40
Merge mips1 and mips3 pte/pmap code, pass 0;
...
* Move mips-I pte (TLBlo) definitions from pmax/include/pte.h
to mips/include/mips1_pte.h
* Move mips-III pte (TLBlo) definitions from pica/include/pte.h
to mips/include/mips3_pte.h
* Add new mips/include/pte.h, which includes exactly one of
mips1_pte.h or mips3_pte.h (which still have namespace collisions),
depending on "options MIPS1" or "options MIPS3". (hack).
Move soft kvtopte(), ptetovk() definitions to mips/include/pte.h
* Add macro PTE_TO_PADDR() to hide the different hardware TLB formats
when mapping from pte to physical address.
* Add macro PTE_READONLY() to hide lack of SW read-only bit in mips-III
tlb. (mips1 pmap uses a sw bit in the PTE, mips3 looks up RO bit in
the kernel pmap.)
* Use macros (not direct TLB frobbing) in mips/trap.c, to make it
mips-1/mips-III indepenndet.
* Change {pmax,pica}/include/pte.h to just do #include <mips/pte.h>.
1996-10-13 09:28:53 +00:00
a179b23932
Add marker labels to the end of the exception-vector (and exception
...
jump-table) locore entrypoints, so the stack traceback code can use
the end marker to handle entry points specially when doing tracebacks,
even if it doesn't know about them explicitly.
1996-10-13 08:45:15 +00:00
96eb3c22a4
Commit (very old) partly-merged ARC Pica mips3 trap handler code:
...
* fold in netBSD style changes:
``if (foo = bar)'' -> ``if ((foo = bar) != 0)''
* add mips1 vector as well as mips3 vector
* change vector names to make mips1 and mips3 locore entrpoints distinct
* add pmax additions (e.g., old fixes to ktrace code, kernel-TLB_miss
instrumentation)
* update stack traceback code to a newer version of the pmax code.
1996-10-13 08:15:40 +00:00
bc759e3dfb
Apply
...
>backout previous kprintf change
change.
1996-10-13 07:45:01 +00:00
a49fa844a1
Fix stack traceback code for merged mips1/mips3 support:
...
add catch-all case, with distinct mips1 and mips3 ranges for locore
entry points, cases to catch othewise-unknown locore entrypoints and
vector code (which have special entry sequences and require special
support to trace through). The relevant mips1 and mips3 functions are
of course now distinct.
1996-10-13 07:09:33 +00:00
0705c8f480
Kernel configuration file to build kernels for installing on diskful
...
machines, using diskless-boot (NFS root) as the installation method.
Many options turned off to keep kernel small and avoid boot-PROM errors.
1996-10-13 05:57:19 +00:00
5a80d438e9
Update pmax config files ``GENERIC'' and ``DSG'' with post-1.2
...
NetBSD-current changes:
* change include paths to be relative to the kernel-source tree
(e.g., `/sys') instead of arch/pmax/conf.
* add explicit options for exec packages (EXEC_ELF32, EXEC_ECOFF
for COMPAT_ULTRIX)
* comment out references to still-unsuppoted MI scsi.
1996-10-13 05:40:44 +00:00
bb34d39024
Change pmax port over to using ``mips MI'' trap handler.
1996-10-13 05:28:48 +00:00
50201a6c48
Comment out config lines for MI scsi drivers, to make it absolutely clear
...
we don't yet support them.
1996-10-13 05:21:17 +00:00
54766d93cf
Merge low-level mips trap handling and move to arch/mips/mips/trap.c.
1996-10-13 05:14:35 +00:00
87414435ba
Add initializers for System V ipc, semaphores, and shared-memory,
...
for options SYSVMSG, SYSVSEM, and SYSVSHM, respectively.
Fixes pr #2823 .
1996-10-13 04:32:26 +00:00
8ab94387e9
Change boot() to honour "always halt" flags in boothowto,
...
other boot() changes modelled on arch/alpha/alpha/machdep.c.
1996-10-13 04:26:49 +00:00
17f5b2a175
backout previous kprintf changes
1996-10-13 04:10:34 +00:00
a087bfeb5c
backout previous kprintf change
1996-10-13 03:47:25 +00:00
9bcd95a0ae
Header file with dc7085 (dz-11 clone) declarations used by pmax console and
...
framebuffer code.
1996-10-13 03:42:17 +00:00
d286889901
backout previous kprintf change
1996-10-13 03:39:27 +00:00
e37692f04d
backout previous kprintf change
1996-10-13 03:29:05 +00:00
16b74d2c00
use in_addr_t and in_port_t
1996-10-13 03:28:00 +00:00
40ecbf8e72
backout previous kprintf change
1996-10-13 03:21:13 +00:00
bd73314ed9
backout previous kprintf changes
1996-10-13 03:19:38 +00:00
9dc680b6a4
backout previous kprintf change
1996-10-13 03:19:10 +00:00
30efd6881a
use in_addr_t and in_port_t
1996-10-13 03:16:41 +00:00
30b3cc3d09
backout previous kprintf changes
1996-10-13 03:14:05 +00:00
7c9b908394
use in_addr_t and in_port_t
1996-10-13 03:12:38 +00:00
ca36ac9ef4
backout previous kprintf change
1996-10-13 03:05:43 +00:00
986daa1436
Split sii driver into bus-dependent front-end and chip-specific back-end:
...
sii_ds.c -- front-end for Decstation 2100, 3100, 5100(?)
sii.c -- driver for DEC scsi asic used in decstations and vax 3400s
siivar.h -- shared softc
1996-10-13 03:02:39 +00:00
de83b4558f
use in_addr_t and in_port_t
1996-10-13 03:02:26 +00:00
8d9699acda
backout previous kprintf change
1996-10-13 02:59:55 +00:00
cabe1f09ff
use in_addr_t and in_port_t
1996-10-13 02:59:54 +00:00
7d1960f502
backout previous kprintf change
1996-10-13 02:59:38 +00:00
55ff7d5106
backout previous kprintf changes
1996-10-13 02:59:37 +00:00
0039d4aa0c
backout previous kprintf change
1996-10-13 02:59:25 +00:00
d7363b596f
backout previous kprintf changes
1996-10-13 02:59:23 +00:00
e43661dda6
use in_addr_t and in_port_t
1996-10-13 02:57:47 +00:00
b078069824
in_addr_t and in_port_t changes
1996-10-13 02:55:48 +00:00
99a94f057e
Put back the ttstop-returns-void changes accidentally clobbered by
...
merging the 1.2 and -current branch serial-console fixes.
1996-10-12 23:41:35 +00:00
0c820bd260
Split driver for decstation-3100 framebuffer (BrookTree bt478 RAMDAC,
...
DEC dc503 cursor chip) into Decstation 2100,3100 cfattach front-end
and ``machine-independent'' back-end.
pm_ds.c: pmin/pmax cfattach front-end
pm.c: bt478, 503 back-end
pmvar.h: declarations of back-end normal and console attach
entry points.
1996-10-12 23:33:18 +00:00
5b9a5a91b2
Added a macro for un-cacheable un-bufferable ptes.
1996-10-12 18:31:10 +00:00
8759f643d5
Don't need to include machine/reg.h here.
1996-10-12 18:29:32 +00:00
9e61254436
Fixed typo.
1996-10-12 18:25:59 +00:00
61d95c8ea3
Initial commit of doc describing boot options and parameters recognised
...
by the kernel.
1996-10-12 18:24:43 +00:00
b2f63215fc
don't forget to switch back to the .text after emitting warning
...
strings in their own sections.
1996-10-12 18:08:12 +00:00
c67390fd59
mmutype and fputype disappeared from machine/cpu.h during a merge toward
...
m68k stuff.
1996-10-12 17:34:52 +00:00
3831c5a790
KDASSERT is now in lib/libkern/libkern.h, so we don't need
...
amiga/amiga/kdassert.h.
1996-10-12 17:27:28 +00:00
784dc6bd1b
poll(2) changes for framebuffer.
1996-10-12 16:00:21 +00:00
b403f60a0e
Don't try to probe devices past the number of tz devices configured - stops
...
corrupting data past the end of tz_softc[].
1996-10-12 15:59:39 +00:00
4d1a9465f1
Add arch/mips/mips/mips_machdep.c, it's now compiled as a separate file.
1996-10-12 15:49:15 +00:00
2903ee4df5
Add second Quadra class and machineid (gestalt value) for Color Classic II
1996-10-12 07:35:29 +00:00
0b8603b55b
Needs <stdio.h> now that printf() isn't defined in kernel headers.
1996-10-12 04:34:16 +00:00
4879f62ed8
Need <sys/exec.h> for the PS_STRINGS definition.
1996-10-12 02:20:37 +00:00
574994daaf
Fix compile errors when not configured for the Draco.
1996-10-11 21:32:56 +00:00
c21fad0c51
Changes for poll(2).
1996-10-11 21:12:43 +00:00
3d5284e11e
- Fix configuration name of 'lpt'
...
- add 'pcibus' as a mainbus device.
1996-10-11 21:07:02 +00:00
64096bf6d1
- add a iteet_ioctl function so iteconfig(1) can be used to select the
...
screen geometry.
- Re-arrange et_loadmode() and et_inittextmode() to write into shadow
register set instead of writing to the card-registers directly.
- provide et_hwsave()/et_hwrest() functions to transfer the card-registers
to and from the shadow set.
1996-10-11 21:02:48 +00:00
6cfe8836c4
*** empty log message ***
1996-10-11 21:01:26 +00:00
b88d6013b6
Remove grf_ite_ioctl(). Replace it by 'itexx_ioctl' that is configurable
...
per ite-type.
1996-10-11 20:50:34 +00:00
f22ea83247
The dc has to have needs-flag so dc.h gets generated.
1996-10-11 19:58:43 +00:00
2d3fc12c2b
Fixed typo on EXEC_ELF32.
...
Newline at end of file was missing.
1996-10-11 19:55:38 +00:00
e0e8090630
Add missing const to simple_devprint() char * parameter.
1996-10-11 19:49:49 +00:00
cb8e03f393
Amiga needs EXEC_AOUT and EXEC_SCRIPT.
1996-10-11 19:34:54 +00:00
eb314d8358
printf -> kprintf, sprintf -> ksprintf
1996-10-11 01:50:21 +00:00
19d8368f2f
printf -> kprintf, sprintf -> ksprintf
1996-10-11 00:44:42 +00:00
de08983084
add in_addr_t and in_port_t
1996-10-11 00:43:00 +00:00
848c9d8f02
printf -> kprintf, sprintf -> ksprintf
1996-10-11 00:39:22 +00:00
06555645c2
printf -> kprintf, sprintf -> ksprintf
1996-10-11 00:24:36 +00:00
8f56de03e1
printf -> kprintf
1996-10-11 00:22:09 +00:00
60dd5ceebe
printf -> kprintf, sprintf -> ksprintf
1996-10-11 00:06:28 +00:00
c47b25b2e5
add -Wall -Wstrict-prototypes -Wmissing-prototypes.
...
We are compiling cleanly now!
1996-10-11 00:04:22 +00:00
1f54d4ded6
add in_addr_t and in_port_t and use them.
1996-10-11 00:02:47 +00:00
e6302ff46c
- add missing prototypes
...
- printf -> kprintf, sprintf -> ksprintf
1996-10-10 23:56:50 +00:00
946833855f
printf -> kprintf, sprintf -> ksprintf
1996-10-10 23:51:21 +00:00
4335eeb4ed
- fix uninitialized sticks
...
- printf -> kprintf, sprintf -> ksprintf
1996-10-10 23:51:19 +00:00
a60beecedb
printf -> kprintf, sprintf -> ksprintf
1996-10-10 23:44:49 +00:00
9beb92aad7
printf -> kprintf, sprintf -> ksprintf
1996-10-10 23:32:59 +00:00
c11d591cfe
add support for ELF toolchain, including weak alias support (for upcoming
...
libc changes) and reference warnings.
1996-10-09 22:41:54 +00:00
6d0af59ad0
change __va_list's "offset" field to be a 'int' to match what gcc now
...
uses, plus add a compatibility hack so that code compiled with old
versions of gcc (e.g. libraries) can work with code compiled with
new versions.
1996-10-09 21:13:04 +00:00
e331708d2f
turn off floppy motor (and light) even if the drive isn't found. This fixes
...
some laptop indicator lights which would be stuck on after the probe
1996-10-09 16:10:14 +00:00
9176e41d88
* Pull over prototyping fixes from i386.
1996-10-09 07:45:28 +00:00
b43657168e
* Add prototypes.
...
* Add support for ddb and kgdb.
1996-10-09 07:45:25 +00:00
9d22d4d454
* Fix declaration of setconf.
1996-10-09 07:45:23 +00:00
85ddb3de03
* A few prototyping tweakes and deletion of unused variables.
...
(pulled over from i386).
1996-10-09 07:45:20 +00:00
e90bc618bd
* Support for ddb.
...
* New patchable variable maxphysmem to limit physical memory.
That's useful to simulate small machines for testing install
kernels.
* Make debugging crashdumps with gdb -k work.
* microtime is moved to clock.c.
* Reserve memory for symbol table when ddb is configured.
* Move checks for RB_KDB into consinit.
1996-10-09 07:45:17 +00:00
89a49bedc6
* Set _kernel_text to the correct value.
...
* Fix a typo in delay().
* Disable generation of profiling prologue for proc_trampoline,
sigcode, idle, handle_trap, flush_icache, svc and interrupt.
* A few tweaks to make kgdb and ddb work nicer.
1996-10-09 07:45:13 +00:00
560bd7e107
* New file for kgdb support.
1996-10-09 07:45:06 +00:00
9c3592a5ca
* Reduce softint latency.
...
* Pull over change from i386 to make statclock > (tty | net | bio).
1996-10-09 07:45:05 +00:00
1dceda47e0
* Make it work for NetBSD and not for mach. Most of
...
this was done by Phil Budne.
* Remove things not used by NetBSD.
* Make stacktracebacks work better.
1996-10-09 07:45:03 +00:00
4484a4406d
* New file for routines common for kgdb and ddb support.
1996-10-09 07:45:00 +00:00
6f37f75ecb
* Make it work for NetBSD and not for mach. Most of
...
this was done by Phil Budne.
* Move some functions shared with kgdb to db_memrw.c.
1996-10-09 07:44:59 +00:00
79ded0d7e1
* Make it work for NetBSD and not for mach. Most of
...
this was done by Phil Budne.
1996-10-09 07:44:56 +00:00
afd88ad8ed
* Remove unused function spinwait.
...
* Add Phil Budne's microtime.
1996-10-09 07:44:54 +00:00
00695d93ae
* Now that ddb works, boot should set esym to the correct value...
1996-10-09 07:42:13 +00:00
483cff53cd
* Add the README file from Ian Dall's original distribution.
1996-10-09 07:40:45 +00:00
84b238b8eb
* Add files needed for kgdb and ddb.
...
* Delete (commented out) ntoh.s.
1996-10-09 07:34:42 +00:00
f0c2efd752
* Remove ncr_minphys. Simply use minphys.
...
* Protect interrupt code with splbio.
* Don't use intr_disable/intr_enable in the pdma routines.
1996-10-09 07:29:58 +00:00
f28c7ec9dd
* Don't use ansi c prototypes. Use the __P() macro.
...
* Support for bpf added.
* Don't duplicate code, use ether_ifattach instead.
* Recode plipreceive and pliptransmit in assembler.
This improves performance from 40 kbyte/s to 50 kbyte/s
between a 30mhz pc532 and a 25mhz i386.
1996-10-09 07:29:55 +00:00
f8c337b300
* Remove intr_disable/intr_enable stuff.
...
* Reduce softint latency.
1996-10-09 07:28:52 +00:00
f673492195
* redefine MAXPHYS to 128k to support DAT-tapes with a
...
very large blocksize.
1996-10-09 07:28:50 +00:00
b5542a0938
* The expression to which ICU_CLK_HZ is defined has to be
...
protected by parentheses.
1996-10-09 07:28:47 +00:00
0a6d52bb21
* Make it work for NetBSD (and not mach). Most of
...
this was done by Phil Budne.
* Delete unused macros.
* Define a few things to support kgdb.
1996-10-09 07:28:44 +00:00
b1bd20fbe2
* Delete define for DELAY.
...
* Add prototype for delay()
* Add prototypes for functions from various
machine dependent files.
1996-10-09 07:28:43 +00:00
1ebd4878ae
* Include profiling prologue not only when PROF is
...
defined but also when GPROF is defined.
* Provide _ENTRY and _ASENTRY to make it possible to
define functions that should not be profiled.
1996-10-09 07:28:40 +00:00
b83348353f
* ddb now works.
...
* Profiling works as well.
1996-10-09 07:21:47 +00:00
401d011da6
Merge netbsd-1-2 branch back into mainline.
1996-10-09 00:14:32 +00:00
b1b86c0c98
Merge the netbsd-1-2 branch into the mainline.
1996-10-08 23:40:40 +00:00
d498950fe3
Merge netbsd-1-2 branch back into mainline.
1996-10-08 22:56:04 +00:00
edd633aef1
Changed "../../m68k/fpe/files.fpe" to "arch/m68k/fpe/files.fpe" because of config changes
1996-10-08 18:03:00 +00:00
705b2e0726
Changed "std.sun3" to "arch/sun3/conf/std.sun3" because of config changes
1996-10-08 18:01:47 +00:00
149707f018
Add const qualifer to second arg of bus_print
1996-10-08 17:55:23 +00:00
e36e19cf1e
repoint at shared aout_machdep.h, not exec.h
1996-10-08 13:07:26 +00:00
472889f8e4
moved to aout_machdep.h (via repository copy)
1996-10-08 12:57:37 +00:00
d557a6a159
change md_coredump struct to actually reflect the machine-dependent stuff
...
that's dumped. use it, rather than a hack, to export the info to user-land
(gdb).
1996-10-07 23:57:21 +00:00
6ab18a1959
don't include <machine/exec.h> explicitly. No other changes needed, since
...
<sys/exec.h> was already being included.
1996-10-07 21:43:02 +00:00
7b01c01516
read user SP into core dump's trapframe
1996-10-07 19:09:17 +00:00
ba4d6af5fa
Merge back MIPS3 locore stack-traceback code.
1996-10-07 11:20:53 +00:00
eeef0d1784
Prototypes for functions in locore.s and machdep.c (oops, forgot to
...
check this in the other day...)
1996-10-07 06:29:30 +00:00
24d2e8ec5f
Sanity sweep.
1996-10-07 04:45:41 +00:00
a2f9031d2f
Add support for copying the miniroot from HP-IB cartridge tape.
1996-10-07 04:45:10 +00:00
872c12f95f
Update ROM vectors for PB 500
1996-10-07 04:05:02 +00:00
f8b0c86aa8
The 68LC040 generates a format 4 stack frame for floating point
...
exceptions, which puts the address of the instruction we faulted
on in a different location. Copy it and handle as we normally would,
restoring the saved PC before returning.
The FPE should probably be reworked to take advantage of the 68LC040's
precalculated effective address, at some point.
1996-10-07 03:16:47 +00:00
45c47f41aa
Fix for elf{32,64} changes: make <mips/reloc.h> re-includable,
...
Use elf_xxx section names (not elf32_xxx)in mips/mips/elf.c
1996-10-07 03:15:03 +00:00
fbdaac9a7a
Use "MIPS1" and "MIPS3" as preprocessor tokens to select {config,compile}-time
...
support for mips-1 (r2000 family) and mips-3 (r4000 family) CPUs.
Avoids inconsistent use of CPU_R2000 and CPU_R3000.
1996-10-07 02:17:33 +00:00
4d11703980
Disable 040 caches in doboot(), and some minor stylistic changes to make
...
the hand-coded assembly consistent throughout.
1996-10-07 01:37:20 +00:00
bc504916f3
Garbage-collect some sun3-specific stuff, add some debugging code,
...
and KNF.
1996-10-06 19:07:53 +00:00
61a0ffca58
Fixup (unused) netstrategy() routine's calling convention (just returns
...
EIO). Garbage collect unused netioctl() - conf.c redirects netioctl()
to noioctl().
1996-10-06 19:07:00 +00:00
a3c29be5e0
Fixup ctstrategy() calling convention. The standalone ct driver
...
works again.
1996-10-06 19:05:27 +00:00
c11ba5f711
key on ELF_TOOLCHAIN being defined (presumably in /etc/mk.conf)
...
to signal that the build is happening on a machine with an ELF
toolchain. This is temporary, until a better toolchain-recognition
scheme is worked out.
1996-10-06 18:32:22 +00:00
71d4d3075e
Commit 1.2 release branch changes (1.6.4.1) back onto main branch.
1996-10-06 06:46:34 +00:00
998ce62cdf
Update pmax drivers to use "const" on 2nd arg to cfprint_t:
...
turbocnhannel: include/tc_machdep.h, tc/tc_subr.c, tc/asic.c
kn01 baseboard: pmax/mainbus.c
1996-10-06 06:29:51 +00:00
6ea58d5fae
Serial console changes:
...
* Enable FIFO with trigger level 1.
* Set DTR and RTS so terminals are happy.
* Do not set IEN.
1996-10-06 01:42:45 +00:00
67cd067f25
Nuke __BDEVSW_DUMP_OLD_TYPE.
1996-10-06 00:15:31 +00:00
39cbdb7e9f
Fix kernel crash dumps. Still uses the old format for now.
1996-10-06 00:14:12 +00:00
a632bcbe9c
update for kern/sa lib Makefile.inc changes.
1996-10-05 23:46:43 +00:00
7b71cdec46
minor copyright update.
1996-10-05 23:41:53 +00:00
84ed172edb
Minimal bus.h. Together with the minimal pci implementation, we have just
...
enough functionality to find a VGA card....
Will be expanded when I buy more pci-cards ;-)
1996-10-05 21:45:30 +00:00
080ee49d98
minimal pci support
1996-10-05 21:41:36 +00:00
d01962702f
General cleanup:
...
- make a prototyping sweep
- do some garbage collection
- always print the status of enabling memory parity checking
Still some more to do.
1996-10-05 09:22:47 +00:00
84b3384afb
Check for internal HP-IB in SYSFLAG much earlier (i.e. before the MMU
...
is turned on).
1996-10-05 09:19:58 +00:00
f52b60c3a0
Prototype ledcontrol().
1996-10-05 09:18:22 +00:00
2ec75a3c3c
Cast a volatile pointer to caddr_t for a call to badbaddr().
1996-10-05 09:17:38 +00:00
a6a1f78d0c
Handle kernel trace traps and breakpoints like the Sun3 port:
...
- Only pass user trace traps and breakpoints on to trap().
Gets rid of some hair in the trace/breakpoint trap cases.
- Before entering the debugger, switch to a temporary
stack so that the debugger can alter the stack pointer.
- Add glue for KGDB (still not complete).
Some other minor cleanup:
- Protect against some bad pointer derefs.
- Be more a little more verbose when a fatal trap
occurs to aid debugging.
1996-10-05 07:24:10 +00:00
8499e0131e
Handle kernel trace traps and breakpoints like the Sun3 port:
...
- Only pass user trace traps and breakpoints on to trap().
- Before entering the debugger, switch to a temporary
stack so that the debugger can alter the stack pointer.
- Add glue for KGDB (still not complete).
Clearly mark the MMU enable trampoline code.
1996-10-05 07:16:52 +00:00
0ff075f6e7
Define FR_SIZE as sizeof(struct trapframe)
1996-10-05 07:11:44 +00:00
2f9a90e967
Don't lower spl before calling main. For now, do it right before
...
calling hilinit(). Eventually, would like to enable them only after
autoconfiguration is finished.
1996-10-05 07:06:11 +00:00
2793eb282e
If console is on an ite, make sure the HIL is initialized enough for
...
the keyboard to work. Fixes a bug where booting with `-d' worked
only on systems using a serial console.
While I'm here, eliminate some redundancy in the ite console intialization
code.
1996-10-05 05:22:04 +00:00
5f728fb6de
Garbage-collect some now-unused PANICBUTTON code.
1996-10-04 22:22:15 +00:00
608fae21af
Clean up handling of non-maskable interrupts.
1996-10-04 22:19:47 +00:00
5c34a4ce35
Use FBTYPE_RESERVED3 for our `unknown' fbtype ... RESERVED1 seems to
...
have disappeared.
1996-10-04 20:35:53 +00:00
3db7555465
Returning ENODEV is not correct in a poll entry point. Instead, since
...
read/write returns an error, use seltrue().
1996-10-04 20:34:33 +00:00
c488b75b83
kill misnamed __indr_references() macro, that would have broken things
...
if it _had_ been properly named.
1996-10-04 19:30:04 +00:00
d12b257695
Fix FMOVEM emulation; postincrement modes use different ordering than
...
predecrement modes, per 68K Programmer's Manual p. 5-88. Pointed out
by Takeshi Nakayama <takeshi@sakabe.nuie.nagoya-u.ac.jp>, verified by me.
1996-10-04 18:07:24 +00:00
d036bd234e
Sync with Chris' changes to the alpha setroot() and friends to resolve some
...
problems with entering "halt" at prompts.
1996-10-04 14:07:03 +00:00
8672fd704e
At the end of the delay calibration routine, explcitly reset the timer.
...
This fixes a critical bug where a clock interrupt would happen sometime
between the call to hp300_calibrate_delay() and when proc0 is initialized.
This ends up dereferencing a bad pointer in itimerdecr(), which scribbles
over the first page of kernel text, specifically vectors 46 and 47 (decimal).
To complicate matters, the way the bug manifested itself was different
depending on whether or not DDB was configured into the kernel. When
DDB is in the kernel, kernel text is mapped read/write. When DDB is not
in the kernel, kernel text is mapped read-only. Note that the kernel
scribble happens early, typically before the console is initialized.
In the non-DDB case, the kernel will hang as soon as it's loaded because
the access causes a fault (before the console is initialized, so you
don't see the trap).
In the DDB case, the access does _not_ cause a fault. However, the
mechanism used to enter the kernel debugger is to issue a "trap #15".
Conveniently, this is one of the corrupted vectors (47), thus rendering
DDB useless (it actually caused a recursive panic/trap loop).
This _WILL_ be in the first 1.2 official patch.
1996-10-04 08:55:04 +00:00
3b5c181c8b
Checkpointing my et4000 work. Note that the et-console will not be
...
functional until the minimal pci-support is checked in.
1996-10-04 07:27:52 +00:00
f5fd8ff1f9
Additions for the et4000 driver & pci-bus.
...
Note that there are still missing pieces so both et4000 & pci can not yet
be used.
1996-10-04 07:12:39 +00:00
982a1c25f7
Add the COMPAT_12 options. For GENERIC, also add the ch/ss/uk devices.
1996-10-04 07:08:28 +00:00
c2f94265a2
Only prototype the writeback() function when the M68040 option is defined.
1996-10-04 07:04:46 +00:00
8eb8b97265
Grok the broken ICD partition format. This should be part of the 1.2 patches.
1996-10-04 07:02:17 +00:00
d8a6bb6779
Add ch/ss/uk devices.
1996-10-04 06:56:25 +00:00
1f81754e6d
switch to 'swap generic' since that works now (minimal diffs from GENERIC)
1996-10-03 20:47:19 +00:00
ff5e6837e6
frob things so that RAMDISK_HOOKS in the 'right' way with 'swap generic'
...
and/or RB_ASKNAME. (Basically, assume that if RAMDISK_HOOKS are included,
the default root device should be rd0a, etc.)
1996-10-03 19:57:58 +00:00
5e8dcd833f
reword attachment printf
1996-10-03 19:54:45 +00:00
40f6aa4b69
add major info for 'rd' ramdisk devices. make parsedisk() static.
...
tolerate 'halt' at any of the boot-time prompts.
fix (fatal) bug in the 'swap device' prompt reprinting code.
1996-10-03 18:42:41 +00:00
f328b34c8d
clean up
1996-10-03 05:32:49 +00:00
9f287be633
Add EXEC_AOUT to all kernels.
1996-10-03 01:25:32 +00:00
748b2c4bbe
Add cgfourteen framebuffer to generic configs
1996-10-03 00:05:41 +00:00
d675cc33af
Add examples of NTP, MROUTING, and serial console.
1996-10-02 23:56:43 +00:00
99e5b1260c
Add EXEC_ options.
1996-10-02 23:15:58 +00:00
3d3546293e
Update to match reality.
1996-10-02 23:14:04 +00:00
eb5fab46d8
No longer used.
1996-10-02 22:24:44 +00:00
652ec49cc8
Update to current reality.
1996-10-02 22:20:51 +00:00
284b1db215
No longer used.
1996-10-02 22:07:59 +00:00
000f32225c
bump the version
1996-10-02 21:26:17 +00:00
f0e79e47bf
spaces/tabs cleanup
1996-10-02 21:18:45 +00:00
0783bd2801
clean and polish a bit
1996-10-02 21:06:56 +00:00
14d1592766
update for exec changes.
1996-10-02 07:11:45 +00:00
fa2f6c517a
Update pmax GENERIC config to use revamped config files with per-model
...
include files containing model-specific I/O device configuration.
Add more options and devices (ccd, LKM, etc), as appropriate for
documentation and as examples in a "template" GENERIC config file,
even though not all of these work completely yet.
1996-10-02 06:41:13 +00:00
15e3cf2814
Add explicit options for elf and script exec packges to std.pmax.
...
Add ECOFF exec option to my own config file; untested.
1996-10-02 05:56:37 +00:00
f3f6da3473
clean up a bit
1996-10-01 21:24:37 +00:00
c143646f2f
Translate Lev1map to physical address for CPU core header.
1996-10-01 20:21:37 +00:00
4588414318
move kvtol1pte outside of _KERNEL
1996-10-01 20:21:05 +00:00
d928dbc14a
support for new-style kernel core dumps for the alpha. Could probably
...
be cleaned up a bit, but it works.
1996-10-01 18:41:08 +00:00
0b1ff14ff3
first cut at alpha machdep kernel coredump header
1996-10-01 18:38:05 +00:00
f828028e92
Add some files that CVS missed somehow
...
These are empty for now, but are needed by MI code
1996-10-01 16:13:50 +00:00
acaf5ffad5
kill __BDEVSW_DUMP_OLD_TYPE
1996-10-01 14:26:18 +00:00
4f59e73235
implement a simple (mostly brain-dead; old-style) kernel core dump routine,
...
which dumps all "system"-cluster memory we know about.
1996-10-01 14:25:47 +00:00
b2ba37c8b9
Delete old dkstat index (sd_dk) from old pmax scsi-driver struct, and delete
...
the last references to it from the old/new config glue in pmax/conf-glue.c.
1996-10-01 01:04:48 +00:00
7557090650
Add cgfourteen_poll() entry point to sync with recent changes in frame
...
buffer cdev code.
1996-10-01 00:06:45 +00:00
0b99fde177
Fix PR/2782: Remove definition of dos_partitions[].
1996-10-01 00:06:05 +00:00
c04e2bf00c
Add cgfourteen to conf.h.
...
Add new framebuffer types for recent-model graphics devices to fbio.h.
1996-09-30 23:45:10 +00:00
1547bff1c4
Add cgfourteen frame buffer at device major number 99. This is what Solaris
...
uses; I don't have access to a SunOS system with a cg14 to tell what
it uses.
1996-09-30 22:49:12 +00:00
e46ca2d67c
Add cgfourteen driver as device "cgfourteen"
1996-09-30 22:43:38 +00:00
mark