-Add a really bad hack: The X server (4.1.0 afaict) appearently overwrites
the PGTBL_CTL which contains the base address of the pseudo-GATT.
Restore the original value if we notice this happened.
The X server works now, but only with soft cursor.
-allocate space for DMA segments as much as necessary
-fix format warnings in a debug output
-don't try to access AGP capability stuff in the PCI config header
if it doesn't exist (as on the i810)
"earliest" firing callout in a bucket. This allows us to skip
the scan up the bucket if no callouts are due in the bucket.
A cheap O(1) hint update is done at callout insertion (if new callout
is earlier than hint) and removal (is bucket empty). A thorough
refresh of the hint is done when the bucket is traversed.
This doesn't matter much on machines with small values of hz
(e.g. i386), but on systems with large values of hz (e.g. Alpha),
it has a definite positive effect.
Also, keep the callwheel stats in evcnts, so that you can view them
with "vmstat -e".
Remove some overzealous locking of HEAD_TO_MAP
Remove a potential deadlock in pmap_copy_page
Change alloc and free l1pt to use kenter/kremove.
Update pmap_map to use kenter (only actually used by dumpsys, so no matching kremove)
protocols, and lacking any timeouts, but it basically works, doing four-way
handshakes in both directions and incoming Machine Peek operations.
Oh, and Econet is Acorn's ancient, proprietary 500kbit/s networking
technology.
all open TCP connections in tcp_slowtimo() (which is called 2x
per second). It's fairly rare for TCP timers to actually fire,
so saving this list traversal is good, especially if you want
to scale to thousands of open connections.
This will allow improvements to the pmaps so that they can more easily defer expensive operations, eg tlb/cache flush, til the last possible moment.
Currently this is a no-op on most platforms, so they should see no difference.
Reviewed by Jason.
and call it directly from tcp_slowtimo() (via a table) rather
than going through tcp_userreq().
This will allow us to call TCP timers directly from callouts,
in a future revision.
this file; while I'm here, rework the GIO arbitrator parameter setup to
match more closely what is done by lunix on the same hardware... Finally,
on a tip from Wilbern Cobb, preserve the graphics-related bits of the
GIO arbitrator parameter register from the PROM-initialized settings so
ARCS console on the graphics display works (tested on both my Indy with
Newport and my Indigo2 with XL gfx).
Instead of incrementing t_idle and t_rtt in tcp_slowtimo(), we now
take a timstamp (via tcp_now) and use subtraction to compute the
delta when we actually need it (using unsigned arithmetic so that
tcp_now wrapping is handled correctly).
Based on similar changes in FreeBSD.
be spread over several devices, and the phcb is usually the main one.
Add agp_machdep.c file which implements MD agp functions (currently
just agp_flush_cache).
function on all (probed) PCI buses:
int pci_find_device(struct pci_attach_args *pa,
int (*match)(struct pci_attach_args *));
The pci_attach_args structure pointed to by pa is filled in if the
device is found, and 1 is returned. Otherwise 0 is returned.
This function is, unfortunately, needed by the i810 agp code. It's
also of use for LKMs.
Also frob pci_probe_bus to take 2 extra args when used by pci_find_device.
APM_IOC_GETPOWER ioctl read/write. Setting the batteryid in the passed
structure returns the data for just that battery. The old ioctl
remains for binary compatibility but has been renamed.
Itojun already did the hard work -- I just added a couple of lines.
reviewed by: thorpej
Thorpe as an extension to the bus_space(9) API.
Only the mainbus has a working mmap... iomd, podulebus and isa dont have
one yet. Its trivial to add the iomd and isa's memory part but am a bit
hessistant to add it without knowing its implications by heart.
Podulebus might be implemented in 32 bits EASI but otherwise its not really
transparent since there is AFAIK no function to explicitly read one byte or
so .. or is this implemented in a higher level ?
ARM26 and arch/arm32/dnard (Shark) kernels compile and RiscPC and Shark
kernels are tested and function OK.
Implications of other ARM systems like hpcarm and ebarm are propably
minimal or solved trivially.
need to check for curproc being non-NULL since none of the pmap
interfaces which are legal to use in interrupt handlers use this macro.
- use the hit op when flushing the cache in pmap_kremove().
- avoid trusting the optimizer in pmap_clear_reference().
- fix pmap_clear_modify() to reset the mod-bit emulation so we can
detect further modifications to the page, also flushing the cache
for any mappings which might have dirty lines.
kernel_map. use this instead of the static map entries when allocating
map entries for kernel_map. this greatly reduces the number of static
map entries used and should eliminate the problems with running out.
This also involved updating the in-kernel DES functions to correspond
to the versions in our in-tree OpenSSL, because the des_SPtrans table
has changed; the asm code will not work with the old permutation table!
C and i386 asm code for the DES, 3DES, and Blowfish CBC modes is also
included; it is not currently built as the ESP processing in esp_core.c
splits the CBC operation and the cipher transform apart. Hopefully that
will be fixed as there is a substantial performance improvement to be had
from doing so. It will remain necessary to use the C version of the
Blowfish CBC function on some i386 machines, however, as the asm version
uses bswapl, which ony 486 and later processors have. The DES CBC code
doesn't have this problem.
Finally, change esp_core.c to use the ecb3_encrypt function instead of
calling ecb_encrypt three times; this improves performance a bit, in
particular in the asm case.
This also involved updating the in-kernel DES functions to correspond
to the versions in our in-tree OpenSSL, because the des_SPtrans table
has changed; the asm code will not work with the old permutation table!
C and i386 asm code for the DES, 3DES, and Blowfish CBC modes is also
included; it is not currently built as the ESP processing in esp_core.c
splits the CBC operation and the cipher transform apart. Hopefully that
will be fixed as there is a substantial performance improvement to be had
from doing so. It will remain necessary to use the C version of the
Blowfish CBC function on some i386 machines, however, as the asm version
uses bswapl, which ony 486 and later processors have. The DES CBC code
doesn't have this problem.
Finally, change esp_core.c to use the ecb3_encrypt function instead of
calling ecb_encrypt three times; this improves performance a bit, in
particular in the asm case.
