failed because we failed to acquire some resource needed to initiate
the pageout (such as failing to lock an indirect buffer) rather than
a hard i/o error. in this case we just want to reactivate the page(s)
so that we'll try to write them again later.
while I'm here, clean up some DIAGNOSTIC code.
- in genfs_getpages(), unbusy any pages that we don't free in the error path.
- in genfs_putpages(), if we get a bmap error, record that in the master buf.
remove all (legacy) "i4b_" prefixes outside of sys/netisdn.
Prefix all card specific driver support files with the basename
of the driver bus attachement file.
Renamed here:
i4b_isic_isa.c -> isic_isa.c
i4b_avm_a1.c -> isic_isa_avm_a1.c
i4b_daic_isa.c -> daic_isa.c
i4b_itk_ix1.c -> isic_isa_itk_ix1.c
i4b_tel_s08.c -> isic_isa_tel_s08.c
i4b_tel_s016.c -> isic_isa_tel_s016.c
i4b_tel_s0163.c -> isic_isa_tel_s0163.c
i4b_usr_sti.c -> isic_isa_usr_sti.c
Due to the StrongARM support code in the cpu_reset() MC-function,
an instruction was executed to drain the write back buffer on StrongARM
processors (might even be armv4+).
Since ARM{6,7} don't recognize this instruction they will either except
for an illegal instruction on this or have undefined behaviour resulting
in an endless illegal instruction/data abort/reset behaviour.
The fix contains a flag that signals if the WB flush should be executed
or not for the detected processor.
remove all (legacy) "i4b_" prefixes outside of sys/netisdn.
Prefix all card specific driver support files with the basename
of the driver bus attachement file.
Renamed here:
i4b_isic_pcmcia.c -> isic_pcmcia.c
i4b_isic_pcmcia.h -> isic_pcmcia.h
i4b_avm_fritz_pcmcia.c -> isic_pcmcia_avm_fritz.c
i4b_elsa_isdnmc.c -> isic_pcmcia_elsa_isdnmc.c
i4b_elsa_mcall.c -> isic_pcmcia_elsa_mcall.c
i4b_sbspeedstar2.c -> isic_pcmcia_sbspeedstar2.c
remove all (legacy) "i4b_" prefixes outside of sys/netisdn.
Prefix all card specific driver support files with the basename
of the driver bus attachement file.
Renamed here:
pci_isic.h -> isic_pci.h
pci_isic.c -> isic_pci.c
i4b_avm_fritz_pci.c -> isic_pci_avm_fritz_pci.c
i4b_elsa_qs1p.c -> isic_pci_elsa_qs1p.c
remove all (legacy) "i4b_" prefixes outside of sys/netisdn.
Prefix all card specific driver support files with the basename
of the driver bus attachement file.
Renamed here:
isapnp_isic.c -> isic_isapnp.c
i4b_ctx_s0P.c -> isic_isapnp_ctx_s0P.c
i4b_drn_ngo.c -> isic_isapnp_drn_ngo.c
i4b_dynalink.c -> isic_isapnp_dynalink.c
i4b_elsa_qs1i.c -> isic_isapnp_elsa_qs1i.c
i4b_siemens_isurf.c -> isic_isapnp_siemens_isurf.c
i4b_sws.c -> isic_isapnp_sws.c
i4b_tel_s0P.c -> isic_isapnp_tel_s0P.c
- clean up WARNS=2 problems
- implement getshort()
- use getshort() with MBR_MAGICOFF to test if the magic number is OK, rather
than using hard-coded magic numbers
simonb