ca351acf50
avoid an unused variable warning
2001-08-05 03:03:16 +00:00
fcc522e5ce
It seems the fixed rate versions are actually fixed at 48 kHz, not 44.1 kHz.
2001-08-04 22:15:56 +00:00
177230d1d6
implement pmap_k{enter_pa,remove}() correctly.
...
remove various checks for impossible conditions.
other misc cleanup.
2001-08-04 18:42:39 +00:00
87f451b1a0
This isn't relevant any more.
2001-08-04 16:55:07 +00:00
03e46dc80b
Some changes from OpenBSD, and some of my own:
...
- More SCSI port defs.
- Nuke vtophys().
- Release resources in iop_init() upon failure.
- Don't use a message wrapper when initalising the outbound FIFO.
- A couple of field size/endian fixes.
- Just use iop_post() when we don't need special handling.
- IM_DISCARD is now pointless, since we don't queue at the driver level.
- Map data transfers from/to userspace directly.
- A few comment and stylistic changes.
2001-08-04 16:54:18 +00:00
79124b95bf
implement pmap_k{enter_pa,remove}() correctly.
...
remove various checks for impossible conditions.
other misc cleanup.
2001-08-04 16:26:49 +00:00
0e356bc8ef
fix VR4122 some unit address.
2001-08-04 14:08:46 +00:00
97ceb61316
MII access routines for ASIX AX88190.
2001-08-04 11:38:57 +00:00
6bc422a7ee
use pmap_k* in pagemove() (ie. for buffer cache pages)
...
and in vmapbuf() and vunmapbuf() (since there's no VAC on this platform).
2001-08-04 07:44:52 +00:00
ea127ad258
use pmap_k* in pagemove(), ie. for buffer cache pages.
...
in vunmapbuf(), call pmap_kremove() explicitly since uvm_km_free_wakeup()
will soon no longer do it for us.
2001-08-04 07:42:07 +00:00
be706f969f
in vunmapbuf(), call pmap_remove() explicitly since uvm_km_free_wakeup()
...
will soon no longer do it for us.
2001-08-04 04:28:49 +00:00
f6a81a1ac7
remove the uncached idle-loop page zeroing.
...
(to be replaced by a version that uses the cache...)
2001-08-04 04:26:48 +00:00
873e926c7b
remove remaining spl calls, they're not needed.
...
remove some checks for impossible conditions.
in pmap_enter(), only call pmap_remove() to remove an existing mapping
if there actually is an existing mapping.
in pmap_remove_pv(), don't flush the MIPS1 cache when removing the last mapping.
this was added in rev 1.97, to avoid stale data being left in the cache
when the page is zeroed bypassing the cache in pmap_zero_page_uncached().
we've since found that bypassing the cache for idle-loop page zeroing
doesn't work very well anyway, so we don't do that anymore.
so now we can remove the extra cache-flush.
remove pmap_zero_page_uncached() while I'm thinking of it.
various other cleanup.
2001-08-04 04:25:37 +00:00
843823c7c5
rewrite set_segmap_allctx() in assembly.
...
reduces cpu usage of sequential write()s to a file by 5%.
2001-08-04 04:06:29 +00:00
10a5470050
Ops, forgot to commit this one:
...
- kill carrier detection code, it's not that usefull and give false indications
on loaded ethernet segments
2001-08-04 02:21:24 +00:00
4b5c6b86d6
Minor tweak to build kernel under a.out environment.
2001-08-04 00:54:30 +00:00
3070e77046
Remove (#if 0'ed) m68k asm codes.
2001-08-03 23:09:42 +00:00
43383b1e36
simplify previous fix (0-length mbuf in mbuf chain). from freebsd
2001-08-03 21:11:57 +00:00
d21af3840d
Make the directory list alphabetical again.
2001-08-03 18:28:09 +00:00
7c292e3d22
- kill the carrier detect code. It's not usefull any more and can give
...
false informations on a loaded ethernet segement.
- convert to bus_dma(9) (better late than never :)
- add proper le32toh/htole32 so that it works on big-endian system (tested
on macppc).
Close PR kern/10327.
2001-08-03 16:53:08 +00:00
e7021f649d
Remove unnecessary test.
2001-08-03 14:10:16 +00:00
b51ccd5322
Cosmetics.
2001-08-03 12:58:38 +00:00
b1919bc716
Add bmtphy.
2001-08-03 12:56:55 +00:00
cf037802c2
Add an I/O Data adapter.
2001-08-03 11:17:17 +00:00
c7aac1f4ef
Regen.
2001-08-03 11:16:50 +00:00
5c01e15b22
Ad an I/O Data Ethernet adapter.
2001-08-03 11:16:24 +00:00
58ed62e500
Constraint 'blkcnt' of lfs_markv() syscall by 64KB. Reviewed by
...
Konrad Schroder <perseant@NetBSD.org>.
2001-08-03 06:02:42 +00:00
332bb4894a
bound check mount args more thoroughly
2001-08-03 06:00:13 +00:00
c650c8d91c
make local 'nsops' same unsigned type as the value we store there in sys_semop()
2001-08-03 05:58:18 +00:00
518ad20222
Upon further reading of the manual, don't save the MXCSR-at-last-exception.
...
Its status bits are sticky, and unaffacted by FNINIT.
2001-08-03 01:46:08 +00:00
38016b0ba8
Fix some typos in newer ALi M5229 support. Approved by bouyer.
2001-08-03 01:31:08 +00:00
099e93139b
In setregs(), initialize the process's MXCSR to the reset-default
...
value as documented in the IA-32 Instruction Set Reference (in the
description of the LDMXCSR insn).
2001-08-03 01:24:39 +00:00
cfb1fd004d
Don't clobber the MXCSR when we fake FNINIT.
2001-08-03 01:21:34 +00:00
f72ee0a9c6
Remember the MXCSR at last-exception the way we do the FPU SW/TW.
2001-08-03 01:11:49 +00:00
3f5acd41c2
Remove trailing "U" on KERNBASE introduced in last commit.
...
Breaks assembly of locore.
2001-08-03 01:03:10 +00:00
6e331fdd9f
Define KERNTEXTOFF in terms of KERNBASE.
2001-08-03 00:47:59 +00:00
8f308d671e
Adapt to new FPU save format in PCB.
2001-08-03 00:41:46 +00:00
8c3ac05de9
Bump version for * command addition.
2001-08-03 00:41:12 +00:00
33452511ed
Add a single * command, *boot26, so that the module can be manually invoked
...
after it's loaded.
2001-08-03 00:40:23 +00:00
b471d90032
Add OS_Module.
2001-08-03 00:32:30 +00:00
6e82ab9796
Wrap boot26 in a minimal relocatable module. When *RMRun, it just copies the
...
existing boot26 code to 0x8000 and runs it.
2001-08-02 23:55:55 +00:00
3e749936d6
Script to generate a help string for a RISC OS module from the same sources
...
as newvers_stand.sh uses.
2001-08-02 23:47:07 +00:00
4eebbc71e2
Don't force booters to have srt0.S at the start if they don't want to.
...
Also allow them to override the filetype they end up with.
2001-08-02 23:38:04 +00:00
09c1ee004c
Fix bcopy.
2001-08-02 22:41:32 +00:00
a9eb6b2c79
(*fs_mount): do not get the parent vnode back from namei to just release it
2001-08-02 22:40:58 +00:00
08b77f43f0
Deal with the SSE FPU save format.
2001-08-02 22:04:57 +00:00
f0449fd933
- Rename cpu_use_fxsave to i386_use_fxsave.
...
- If we detect SSE/SSE2 support in the CPU, enable SSE exceptions
and set i386_has_{sse,sse2} as appropriate.
- Expose i386_use_fxsave and i386_has_{sse,sse2} through sysctl
as machdep.{osfsxr,sse,sse2}.
2001-08-02 22:04:28 +00:00
99a7f640fe
Add support for saving/restoring SSE/SSE2 state using FXSAVE/FXRSTOR.
...
Reviewed by Frank.
2001-08-02 21:04:43 +00:00
a2ac0e50f5
Bump version number for loadfile changes.
2001-08-02 20:24:03 +00:00
9ada1599ca
implement rx/tx protocol routine of atmel microcontroller.
2001-08-02 18:51:00 +00:00
d4a7b6fc1c
Fix non-properly ifdef'ed SUN4 only code.
2001-08-02 18:06:22 +00:00
10414d85a9
Undo version bump. The sparc ofwboot doesn't use loadfile().
2001-08-02 16:22:46 +00:00
5424e08a49
Change the start address to load the kernel. We have 768k more free
...
memory now.
2001-08-02 14:45:40 +00:00
7aac1bef3b
Don't assume KERNEL_TEXT_BASE >= 0xc0080000.
2001-08-02 14:42:08 +00:00
f2c68887e0
Check if sc->sc_dc is NULL, so that non-console hpcfb can attach without
...
a panic.
2001-08-02 14:40:04 +00:00
47133068ba
do not break from loop even if m_len == 0. it's valid to have
...
mbuf with m_len == 0 in mbuf chain.
2001-08-02 13:37:51 +00:00
f7c2f13a54
Properly setup timings for ata-4 controllers, including UDMA modes.
...
Tested on a brand new ("dual USB ?") ibook.
2001-08-02 12:41:39 +00:00
ad2c12a28d
Bump version numbers of all bootloaders that use loadfile/ELF, to account for
...
my changes to symbol loading. I should probably have done this at the time,
but it's better late than never.
2001-08-02 12:24:05 +00:00
ce781443e0
pass replay sequence number on sadb_x_sa2 (it's outside of PF_KEY standard
...
anyways).
2001-08-02 12:10:14 +00:00
b26591525e
remove "register" variable specifier. sync with kame
2001-08-02 11:32:14 +00:00
5215d66720
add MC-R700 battery parameters.
2001-08-02 11:21:27 +00:00
2746e887bc
turn pwctl_debug to 0
2001-08-02 09:47:18 +00:00
ad4858224a
make this file compilable without TX39IRDEBUG.
2001-08-02 04:30:01 +00:00
afa694c704
Sync bzero w/libc version.
2001-08-02 01:47:47 +00:00
32c36b5e14
fix logic to free up ifqueue on if_detach(). prev pointer was incorrectly set.
2001-08-02 01:42:38 +00:00
aaf3c7c88b
Hook in the mly control interface on i386.
2001-08-01 20:54:16 +00:00
4b584bf5bb
Add several more Intel cache info entries, and fetch the CFLUSH
...
line size if we have the CFLUSH insn.
2001-08-01 19:50:48 +00:00
ebbd9cd428
Add some more CPUID feature bits.
2001-08-01 18:47:38 +00:00
5cfec63f0d
Integrate fixes from userland memset.
2001-08-01 17:01:26 +00:00
2c44aa6dfd
Remove unused pciide_print() declaration. From OpenBSD.
2001-08-01 16:29:21 +00:00
faf8b4c913
Update from hpcarm with changes to probe routine and test for chip ID.
2001-08-01 14:02:58 +00:00
d9f2bbf31f
add initialization of GPDR pin direction to ipaqpcic_init(sc).
...
add judgment of complete of the Card (SAPCIC_STATUS_READY)
2001-08-01 13:18:44 +00:00
3d57cec099
Add new entry for intel ICH2 LPC interrupt router. It has
...
upper compatibility with piix.
2001-08-01 09:11:19 +00:00
1af1e2f9eb
implement a atmelgpio.c
...
this is initial version, only frame.
2001-08-01 07:59:43 +00:00
e1eef3118a
add entry of Atmel microcontroller and uda1341 codec
2001-08-01 07:03:45 +00:00
a179a1a6b1
i mistake
...
reverse a change
2001-08-01 07:02:54 +00:00
1b56a92cf9
add entry of Atmel microcontroller and uda1341 codec
2001-08-01 06:59:17 +00:00
4c5c9a1509
add register of GPCLK/UART1 (SACOM1_BASE)
2001-08-01 06:43:50 +00:00
286cc764db
add more register of DUAL PCMCIA SLEEVE for iPAQ
2001-08-01 06:14:31 +00:00
26c61e2dd0
change\n\tswitch (scsiq->host_status)\nto\n\tswitch (scsiq->scsi_status)\nin adw_isr_callback()
2001-07-31 23:12:01 +00:00
98cdfa790c
fix typo for previous in I386_CPU case
2001-07-31 22:52:44 +00:00
286faf2070
Extra sanity checking on ELF headers: Make sure the bootloader actually
...
loaded (or claims to have loaded) everything we need.
2001-07-31 22:31:47 +00:00
f8e21592da
regen
2001-07-31 22:30:07 +00:00
b2c29c20ae
Add pci ids for the Intel 80312 I/O companion chip for the
...
Intel 80200 XScale processor.
2001-07-31 22:27:25 +00:00
acf574f63e
When loading ELF, zero out:
...
The e_shstrndx field in the ELF header, since we don't load .shstrtab.
The sh_name field in each section header, for the same reason.
The sh_offset field for any section we don't load.
This means the kernel has some chance of knowing what it's being given. It
also means that the behaviour of old kernels with new loaders should be
deterministic (if not terribly useful: they still can't find the symbol
table).
2001-07-31 22:11:57 +00:00
1af74c304d
iPAQ uses Atmel microcontroller to service a few peripheral devices
...
(Touch panel, Battery status, button events, and others status)
2001-07-31 21:33:03 +00:00
30f144749a
G/C "off", since it was just tracking the difference between maxp and elfp.
2001-07-31 21:09:52 +00:00
67a82e1d4e
Fix a small memory leak when counting the size of the symbol table (shp was
...
ALLOC'ed if (LOAD_SYM|COUNT_SYM), but FREEd if (LOAD_SYM)).
2001-07-31 20:03:03 +00:00
1a35da3617
When loading an ELF kernel, don't load all the STRTAB sections. Instead, just
...
load those STRTAB sections that are referenced by a SYMTAB that we're loading.
The main advantage of this is that (at least with the binaries output by my
ARM ELF linker) this removes the need to seek backwards through the file, which
is a big win when loading a gzipped kernel.
While we're here, don't allocate space for string tables we don't load.
2001-07-31 19:20:29 +00:00
34c3239d32
Don't depend on the bootloader's having loaded the .shstrtab section
...
in order to load the symbol table. Instead of using the sections
called ".symtab" and ".strtab", use the first SYMTAB section (the
ELF spec says there should currently only be one) and the STRTAB
section that's linked to it. I believe this is more robust, and it
certainly makes life easier for the bootloader.
2001-07-31 19:14:18 +00:00
c43f8649d2
Set up function pointers for copyin/copyout in preparation for
...
adding optimized versions for various CPU classes/models.
Split the 386 version of copyout into a separate routine, and
add a 486 version that doesn't have the class/page-writeability
check.
2001-07-31 18:28:58 +00:00
e01e4819af
regen.
2001-07-31 17:01:34 +00:00
4d31855a1c
recognize dlink-660+, from jandberg@netbsd.org (Jukka Andberg)
2001-07-31 17:01:15 +00:00
03b77c0534
Add a CPU_XSCALE defopt (for eventual support).
2001-07-31 17:00:24 +00:00
5664c34574
all outstanding MCA bugs fixed, woo-hoo :)
2001-07-31 13:16:25 +00:00
2b7d2123cd
Make console polling (cnpollc/cngetc) work on IBM PS/2 keyboard controller
...
using level triggered interrupts, which livelocks calling intr routine
if the data register is not read in the interrupt routine, as it's case
when polling after interrupts are enabled during boot.
Block all interrupts when polling for keypress, and modify intr routine
to read and store value from data register. The latter one is to avoid
losing a keypress when one would manage to press a key when kernel is
not in spl-guarded code section.
Tested with classic pccons, 'pcconskbd at pckbc' and 'pckbd at pckbc'
configurations, on i386.
2001-07-31 13:15:28 +00:00
6a036b85d9
correct interrupt pipe of USB-RSAQ1.
...
sc_intr_iface was defined newly,
and interface of interrupt was kept in sc_intr_iface.
2001-07-31 12:33:11 +00:00
52d89f6cf1
Abort redrawing when screen switch was requested.
...
Set virtual text vram when other one is drawing framebuffer.
2001-07-31 10:50:06 +00:00
387ddeb6f1
change DPRINTF() to VPRINTF() in pwctl_hardpower().
2001-07-31 10:37:49 +00:00
5bacff5834
Code cleanup and optimization.
2001-07-31 06:58:09 +00:00
830be13fa2
Dump some enums that make lint unhappy and we never really use anyway.
2001-07-31 06:55:46 +00:00
fb5f7652b6
fix think-o in pmap_kenter_pa().
2001-07-31 05:29:24 +00:00
124ae5b65c
Add an easy way to dump the message buffer from ddb.
2001-07-31 04:28:16 +00:00
35df06a642
Carve off the code that builds a TCP data packet into its own
...
function, and inline it, except when profiling... so we can
profile it.
2001-07-31 02:25:22 +00:00
0d8e804191
fix typo in previous.
2001-07-31 02:17:27 +00:00
aae284be36
Oops, put back the initalization of "done" in mly_thread().
2001-07-31 02:07:14 +00:00
938720eea4
Count the number of times we "self-quench" (ip_output() returns
...
ENOBUFS), and don't inline tcp_segsize() if profiling.
2001-07-31 00:57:45 +00:00
5226d11119
Assume that me->lun contains the device number if this event is for a
...
logical device.
2001-07-30 23:49:51 +00:00
2fa020ae0b
- Forget to report events from logical devices.
...
- Cosmetic changes.
2001-07-30 23:46:28 +00:00
12c4049d31
Don't match boards with a PCI class code of `I2O'.
2001-07-30 23:29:08 +00:00
50f76258ac
Check the passed file handle length _before_, not _after_ copyin()
2001-07-30 22:51:06 +00:00
02e4c3348c
Check the length of a passed in filehandle to the mount call before
...
doing a copyin. From Ken Ashcraft @ Stanford via Constantine Sapuntzakis.
2001-07-30 22:23:42 +00:00
8180bfa441
Add missing `error'.
2001-07-30 22:04:08 +00:00
2d5bc65e0b
enable KERNFS, it's used by installation
2001-07-30 21:50:48 +00:00
6e0195e742
Make the set_page_cacheable/set_page_cacheinhibit functions do the
...
right thing on 68030 again.
2001-07-30 21:32:49 +00:00
da3836f00d
Flush the caches in pmap_remove_mapping() when PRM_CFLUSH is specified.
...
Also, flush the ATC for the page in pmap_kenter_pa() after setting up the
mapping. With any luck this last one might just solve the 060 problems I've
been seeing...
2001-07-30 21:25:08 +00:00
b0f8b119a2
fix comment
2001-07-30 20:51:29 +00:00
8fc6974449
Oops, make Rx interrupt deferral actually work.
2001-07-30 20:12:10 +00:00
87da05b00f
Note mly(4).
2001-07-30 20:02:58 +00:00
3b1828355b
Add a driver for Mylex AcceleRAID and eXtremeRAID controllers with v6
...
firmware. Based off the FreeBSD driver, and re-worked by tls, erh and I.
2001-07-30 19:59:04 +00:00
b0178f25e3
Move GENERIC_PS2 to GENERIC_PS2TINY, update comments to reflect this config is
...
intended for small memory machines.
Update INSTALL_PS2 appropriately.
2001-07-30 18:24:07 +00:00
3531778254
add MCA stuff, for IBM PS/2
2001-07-30 18:03:54 +00:00
1dcdcbf286
The memmap structure contains the memory bitmap returned by the PROM
...
getbitmap() call.
2001-07-30 17:05:51 +00:00
6b65fea380
Remove unused hpc includes.
2001-07-30 16:23:09 +00:00
9013c85405
Update from hpcarm to remove iPAQ egpio code.
2001-07-30 16:20:06 +00:00
51bc7258f8
Update from hpcarm with MCP base definition.
2001-07-30 16:08:42 +00:00
c79059dd3f
Update from hpcarm to remove iPAQ and Jornada specific #defines.
2001-07-30 15:58:56 +00:00
fe42be1734
make elf64_copyargs() of type int also per the recent copyargs changes
2001-07-30 14:07:25 +00:00
210e7a63b4
fix pointer/structure mismatch in some dprintf's
2001-07-30 13:10:30 +00:00
b85ae98e65
Update from hpcarm with MCP register definition.
2001-07-30 12:19:04 +00:00
39bc63e6b3
raise IFF_UP on SIOCSIFADDR. commented by tv@netbsd, sync with kame
2001-07-30 11:12:58 +00:00
495d108bd3
Update from hpcarm with cookie change.
2001-07-30 10:55:49 +00:00
9b65c24aa5
Remove unused LCD definitions.
2001-07-30 10:50:59 +00:00
1304d2220e
Mirror removal from hpcarm.
2001-07-30 10:48:31 +00:00
499d1068e8
Update from hpcarm.
2001-07-30 10:46:08 +00:00
e35b542831
Mirror removal from hpcarm.
2001-07-30 10:33:59 +00:00
730b1a57ac
Copy from hpcarm.
2001-07-30 10:17:21 +00:00
75b9f41751
adjust the hack to build the SRT*.o files.
2001-07-30 00:10:20 +00:00
690a630673
increase the memory disk size, it needs to be bigger with ELF.
2001-07-30 00:09:08 +00:00
29f6bd03da
use pmap_k* for buffer cache pages.
2001-07-29 23:56:33 +00:00
5ad381c2a0
use pmap_k* in pagemove().
2001-07-29 23:51:40 +00:00
934898bc32
Adjust to the new copyargs() footprint.
2001-07-29 21:28:45 +00:00
b474b9ac65
carry on the copyargs() and exit1() changes from kern_exec.c
2001-07-29 21:28:20 +00:00
781411d393
adjust to the new copyargs footprint and cleanup debugging.
2001-07-29 21:26:07 +00:00
f2a8a907b4
simplify an expression.
2001-07-29 21:24:23 +00:00
3e1e7a68e5
adjust to the new copyargs footprint
2001-07-29 21:22:58 +00:00
e2b51c04af
- make copyargs function return the reason it failed and pass a pointer to
...
the stack, so that it can be modified.
- pass the error code in the exit code in addition to aborting.
- kill the second exit1() call; it does not make any sense.
2001-07-29 21:22:42 +00:00
b92cbe7184
now that we know what the traps mean, print their name in debug mode.
2001-07-29 19:31:41 +00:00
d5dfcf76de
a bit more mach glue.
2001-07-29 19:30:56 +00:00
9221ef3b13
Make hpcarm kernel build after arm/arm32 file move.
2001-07-29 15:21:33 +00:00
mrg