Update from hpcarm to remove iPAQ and Jornada specific #defines.
This commit is contained in:
rjs
parent
f0359ecc19
commit
c79059dd3f
|
|
@ -1,4 +1,4 @@
|
|||
/* $NetBSD: sa11x0_gpioreg.h,v 1.1 2001/07/08 23:37:53 rjs Exp $ */
|
||||
/* $NetBSD: sa11x0_gpioreg.h,v 1.2 2001/07/30 15:58:56 rjs Exp $ */
|
||||
|
||||
/*-
|
||||
* Copyright (c) 2001 The NetBSD Foundation, Inc. All rights reserved.
|
||||
|
|
@ -69,99 +69,29 @@
|
|||
#define GPIO(x) (0x00000001 << (x))
|
||||
|
||||
/*
|
||||
* iPAQ H3600 specific parameter
|
||||
* SA-11x0 GPIOs parameter
|
||||
*/
|
||||
/*
|
||||
port I/O(Active) name desc
|
||||
0 I(L) PWR_ON# button detect: power-on
|
||||
1 I(L) IP_IRQ# cpu-interrupt
|
||||
2...9 O LDD{8..15} LCD DATA(8-15)
|
||||
10 I(L) CARD_IND1# PCMCIA Socket1 inserted detection
|
||||
11 I(L) CARD_IRQ1# PCMCIA slot1 IRQ
|
||||
12 O CLK_SET0 clock select 0 for audio codec
|
||||
13 O CLK_SET1 clock select 1 for audio codec
|
||||
14 I/O L3_SDA UDA1341 L3DATA
|
||||
15 O L3_MODE UDA1341 L3MODE
|
||||
16 O L3_SCLK UDA1341 L3SCLK
|
||||
17 I(L) CARD_IND0# PCMCIA Socket0 inserted detection
|
||||
18 I(L) KEY_ACT# button detect: center button
|
||||
19 I SYS_CLK Stereo audio codev external clock
|
||||
20 I(H) BAT_FAULT Battery fault
|
||||
21 I(L) CARD_IRQ0# PCMCIA slot0 IRQ
|
||||
22 I(L) LOCK# expansion pack lock/unlock signal
|
||||
23 I(H) COM_DCD RS-232 DCD
|
||||
24 I(H) OPT_IRQ expansion pach shared IRQ
|
||||
25 I(H) COM_CTS RS-232 CTS
|
||||
26 O(H) COM_RTS RS-232 RTS
|
||||
27 O(L) OPT_DETECT# Indicates presence of expansion pack inserted
|
||||
|
||||
Extended GPIO
|
||||
0 O(H) VPEN Enables programming and erasing of Flash
|
||||
1 O(H) CARD_RESET CF/PCMCIA card reset signal
|
||||
2 O(H) OPT_RESET Expansion pack reset signal
|
||||
3 O(L) CODEC_RESET# onboard codec reset signal
|
||||
4 O(H) OPT_NVRAM_ON Enables power supply to the NVRAM of the
|
||||
Expansion pack.(=OPT_ON)
|
||||
5 O(H) OPT_ON Enables full power supply to the Expansion pack.
|
||||
6 O(H) LCD_ON Enables LCD 3.3V power supply
|
||||
7 O(H) RS232_ON Enables RS232
|
||||
8 O(H) LCD_PCI Enables power to LCD control IC
|
||||
9 O(H) IR_ON Enables power to IR module
|
||||
10 O(H) AUD_ON Enables power to audio output amp.
|
||||
11 O(H) AUD_PWR_ON Enables power to all audio modules.
|
||||
12 O(H) QMUTE Mutes yhe onboard audio codec
|
||||
13 O IR_FSEL FIR mode selection:H=FIR,L=SIR
|
||||
14 O(H) LCD_5V_ON Enables 5V to the LCD module
|
||||
15 O(H) LVDD_ON Enables 9V and -6.5V to the LCD module
|
||||
port name desc
|
||||
0 Reserved
|
||||
1 Reserved
|
||||
2...9 LDD{8..15} LCD DATA(8-15)
|
||||
10 SSP_TXD SSP transmit
|
||||
11 SSP_RXD SSP receive
|
||||
12 SSP_SCLK SSP serial clock
|
||||
13 SSP_SFRM SSP frameclock
|
||||
14 UART_TXD UART transmit
|
||||
15 UART_RXD UART receive
|
||||
16 GPCLK_OUT General-purpose clock out
|
||||
17 Reserved
|
||||
18 UART_SCLK Sample clock input
|
||||
19 SSP_CLK Sample clock input
|
||||
20 UART_SCLK3 Sample clock input
|
||||
21 MCP_CLK MCP dock in
|
||||
22 TREQA Either TIC request A
|
||||
23 TREQB Either TIC request B
|
||||
24 Reserved
|
||||
25 RTC Real Time Clock
|
||||
26 RCLK_OUT internal clock /2
|
||||
27 32KHZ_OUT Raw 32.768kHz osc output
|
||||
*/
|
||||
|
||||
#define GPIO_H3600_POWER_BUTTON GPIO (0)
|
||||
#define GPIO_H3600_PCMCIA_CD0 GPIO (17)
|
||||
#define GPIO_H3600_PCMCIA_CD1 GPIO (10)
|
||||
#define GPIO_H3600_PCMCIA_IRQ0 GPIO (21)
|
||||
#define GPIO_H3600_PCMCIA_IRQ1 GPIO (11)
|
||||
#define GPIO_H3600_OPT_LOCK GPIO (22)
|
||||
#define GPIO_H3600_OPT_IRQ GPIO (24)
|
||||
#define GPIO_H3600_OPT_DETECT GPIO (27)
|
||||
|
||||
#define EGPIO_H3600_VPEN GPIO (0)
|
||||
#define EGPIO_H3600_CARD_RESET GPIO (1)
|
||||
#define EGPIO_H3600_OPT_RESET GPIO (2)
|
||||
#define EGPIO_H3600_CODEC_RESET GPIO (3)
|
||||
#define EGPIO_H3600_OPT_NVRAM_ON GPIO (4)
|
||||
#define EGPIO_H3600_OPT_ON GPIO (5)
|
||||
#define EGPIO_H3600_LCD33_ON GPIO (6)
|
||||
#define EGPIO_H3600_RS232_ON GPIO (7)
|
||||
#define EGPIO_H3600_LCD_PCI GPIO (8)
|
||||
#define EGPIO_H3600_IR_ON GPIO (9)
|
||||
#define EGPIO_H3600_AUD_ON GPIO (10)
|
||||
#define EGPIO_H3600_AUD_PWRON GPIO (11)
|
||||
#define EGPIO_H3600_QMUTE GPIO (12)
|
||||
#define EGPIO_H3600_IR_FSEL GPIO (13)
|
||||
#define EGPIO_H3600_LCD5_ON GPIO (14)
|
||||
#define EGPIO_H3600_LVDD_ON GPIO (15)
|
||||
|
||||
#define EGPIO_INIT (EGPIO_H3600_OPT_NVRAM_ON| \
|
||||
EGPIO_H3600_LCD33_ON| \
|
||||
EGPIO_H3600_LCD_PCI| \
|
||||
EGPIO_H3600_AUD_ON) & 0xFFFF
|
||||
|
||||
#define EGPIO_LCD_INIT EGPIO_H3600_LCD33_ON| \
|
||||
EGPIO_H3600_LCD_PCI| \
|
||||
EGPIO_H3600_LCD5_ON| \
|
||||
EGPIO_H3600_LVDD_ON
|
||||
|
||||
#define IRQ_H3600_POWER_BUTTON IRQ_GPIO0
|
||||
#define IRQ_H3600_PCMCIA_CD0 IRQ_GPIO17
|
||||
#define IRQ_H3600_PCMCIA_CD1 IRQ_GPIO10
|
||||
#define IRQ_H3600_PCMCIA_IRQ0 IRQ_GPIO21
|
||||
#define IRQ_H3600_PCMCIA_IRQ1 IRQ_GPIO11
|
||||
#define IRQ_H3600_OPT_IRQ IRQ_GPIO24
|
||||
#define IRQ_H3600_OPT_DETECT IRQ_GPIO27
|
||||
|
||||
/*
|
||||
* JORNADA720 specific parameter
|
||||
*/
|
||||
|
||||
#define JORNADA720_KBD_IRQ GPIO (0)
|
||||
#define JORNADA720_MOUSE_IRQ GPIO (9)
|
||||
|
|
|
|||
Loading…
Reference in New Issue