a "fast scroll" by setting the display start in memory.
(Only implemented for "scroll up" because this is more used. "scroll down"
is easy to add.)
This moves the semantics of "copyrows" to something like "moverows";
the contents of the new visible lines at the bottom is undefined.
The emulations can live without the original "copy" semantics.
clock source. Now, when my EtherPower II locks up, it eventually recovers!
(Geez, I'd like to know why it does this, and only apparently in 10mb/s mode).
("CTLMODE") subdevice. There are legitimate uses for raw commands with
normal tape handles too.
[I'm not sure if this is a final solution. Administrators might want
to set up a more finegrained policy. However, this should not be mixed
with the "set defaults" semantics of the "CTLMODE" subdevice; another
flag should be used instead (eg execute permission or a minor number bit).]
tty structures, and on some machines (namely the DraCo internal lpt, and some
multi-i/o boards for Amigas and DraCos), tying spltty to the pretty high printer
interupt level would hurt serial performance.
On all affected ports but Amiga, spllpt() has been defined in machine/intr.h
to be spltty(), thus preserving old behaviour. Portmasters are encouraged to
change is, if they feel something else is better (e.g., one of its own were
possible).
us to call isp_reset/isp_init internally with impunity.
Rename isp_phoenix to isp_restart and make it global. Clean it up a tad.
If we get an ASYNC_SYSTEM_ERROR code in isp_intr, call isp_restart and
return- the f/w is toasted at this point (usually), so we have to bring
things back to a known state.
In isp_mboxcmd, when we don't see the HOST_INT bit go clear, try and
find out if the isp is trying to tell us something and try again. This
may avoid a potential deadlock where the previous mailbox command hasn't
been cleared by the ISP.
In isp_init don't try and get device parameters if we already have them-
this typically doesn't work if we're in the middle of an isp_restart.
data ASC/ASCQ of 0x04/0x01 (logical unit not ready, initialization in progress),
hang out for 5 seconds and return a RETRY THE OPERATION command. If we
get a check condition/sense data ASC/ASCQ of 0x04/0x02 (logical unit not
ready, initialization command required), send a polled/nosleep START UNIT
command and return a RETRY THE OPERATION command if that succeeds.
Don't send a START UNIT to a disk quirked as SDEV_NO_START. Don't send
a START UNIT to removable media. The reason for the latter is to not
just blindly spin up new (maybe changed) media.
I should note that I've successfully made this work with the ISP host
adapter so far. Other host adapters will need some work to be able
to manage or reasonably fail NOSLEEP/POLL commands while in this
state. Alternatively, the internal SCSI midlayer structure has got
to allow for more controlled error recovery (e.g., restart queues
controlled by the target driver).
drivers' sense handlers to return. Coincidentally one of them ends up
being ERESTARTSYS.
2) Add a SCSI_URGENT flag to xs structure- this allows host adapters that
do command tagging to do the right thing wrt a tag.
There is one change of note- build a list of completing commands in
ispintr and then say you're done- this avoids some re-entrancy issues
that had surfaced.
- USRobotics WorldPort 14.4 modem
- Mototola Personal Messenger 100c CDPD modem
- Socket Communications PageCard
Note: Most of this should be replaced with a com-port-detecting
heuristic better than the previous two.
cascaded and that it will be unmasked when DMA is thawed after being
frozen. (This also has the effect of making sure that no device ever
erroneously gets DRQ 4.)
1) Quirk entries for Storage Tek 9490 (Timberline) and D3 (Redwood)
drives.
2) Modification to st_loadtape to do a REWIND to BOT if the
action is a load and the tape doesn't support the LOAD command
(9490, SD3, and IBM 3590).
3) Cleaned up the 'undersized user record' error message to
make a little more sense.
Various bug fixes:
kern/1275: Now returns values in dsreg and erreg and sets resid
(as best as it can for a 16 but integer). See also
a recent change to mtio.h. We are declining to fix
the portion of this bug about naming a more specific
SCSI device. Since there is nothing programmatic
you can do with that information, it is not useful
to pass back at this time.
A side effect of this change is that doing MTIOCGET
also forces a mode sense (to get the current state
of WRITE PROTECT).
kern/5647: Now no longer logs to the console ILI or Filemark or (first)
EOM (on write) errors (unless SCSIDEBUG is set).
kern/5525: Substantially increased timeouts for a variety of
operations, and split them into categories of
I/O, Space, and Control operations (each have
likely different inherent times). I/O is for
reads/writes. Control is for mode sense/select.
Space is for spacing the tape.
Until EOM handling is changed, though kern/391 is still not fixed. A side
effect of EOM handling is that you now always 'lose' (to the writing
application's view) the last write since EIO is what is returned on
EOM detection during writes. Hopefully the reader applications don't
get too bent out of shape by this.
takes to do IELEM can be proportional to the number of elements, but is
also affected by wierd things like how readable the barcodes on the
media are. There are worst case scenarios I've seen where there are
white labels on the back of tapes with pencilled in labels which is
*just* close enough to being a bar code that an Exabyte 120 would
peer at them myopically and long enough for a *really* long time to
pass in inventorying the jukebox.
I've upped the limit to be proportional to 5 minutes per element. That
is long enough that someone I'm sure will complain about "you wait
to long and should time out" for broken h/w.
As is also noted in the PR, there are a lot of other issues here. It's
really also a question as to whether to update this driver or go
with CAM's driver. This one doesn't have switching between block
descriptors and not, doesn't support volume tag setting, and so on.
Time is limited. This PR should have been closed and fixed right away,
tho.
as the Shark's CS8900 Ethernet, which want to use the DMA controller in
this mode (as opposed to single mode).
[Editor's note: committed from a Shark using a new bus_dma back-end
and a CS8900 driver converted to use the MI code :-]
-display DEC special graphics and DEC technical characters as far as
possible
-implement the font switching controls (need documentation!)
-behave well if double-width characters are requested
-simplify the state machine: store CSI command modifiers in variables
instead of dedicating own states to each of them
which contain 'standard' com- and lpt-type ports. Some of these present
as PCI simple-communications/serial or simple-communications/parallel
devices, but many do not. (Additionally, there is no document that I can
find that describes the "specific well-konwn register-level" description
of how the 'standard' devices' config space headers shold work.) Eventually,
some of the devices driven by this code should become simple pci attachments
for the 'lpt' and 'com' drivers, but that requires solid documentation.
the BAR-printing function to print a name for the register, factor out
a common register-bits function which can handle the fact that type 2
headers have a different size than is usual, and actually do something
useful with the rest of the bits in the type 2 header.
Before, the probe routine (mcd_find() would succeed even if the probe
code thought it had a response, but didn't recognize the ID-code byte.
Now, only do the promiscuous match if MCD_PROMISC is configured.
- Don't enable interrupts on attach time; we don't have to
- Don't assume that because a card has a cfe entry that matches one
of the standard com ports, is a modem; my floppy was recognized as
a modem! Require a match of the cis strings against *[Mm][Oo][Dd][Ee][Mm]*
- Print things in order so that we don't mess up the output with un-needed
newlines
- Using an array of cis identifiers to find e modem should not use the
function number; it is not reliable. For example 3c562[A-D] are different
Maybe this can go away altogether and print parts of the cis strings
to take a single character at a time, where the character is an "int" now.
The old interface (took a string) was never called with more than 1
char to print, and the "int" allows us to handle charsets cleanly.
It should be able to parse escape sequences up to VT300, but not everything
is implemented. Most notably, there is no font handling - all displayable
characters are handed to the graphics driver. To solve this, a serious
interface change to the graphics driver is needed (Unicode?).
terminal emulation. For this, change the interface to wsdisplay_kbdinput()
to take a "keysym_t" as argument. From there, the code is handed to the
appropriate emulation module via a new entry point: "translate".
Nuke the ioctls dealing with global assignment of character sequences
to keypad/function keys.
The "sun" emulation works much better now!
as with user-land programs, include files are installed by each directory
in the tree that has includes to install. (This allows more flexibility
as to what gets installed, makes 'partial installs' easier, and gives us
more options as to which machines' includes get installed at any given
time.) The old SYS_INCLUDES={symlinks,copies} behaviours are _both_
still supported, though at least one bug in the 'symlinks' case is
fixed by this change. Include files can't be build before installation,
so directories that have includes as targets (e.g. dev/pci) have to move
those targets into a different Makefile.
operation with address 0 length 0, which, according to the SCSI-2 spec, should
be interpreted as "synchronize all remaining blocks beginning at address 0".
a struct device * corresponding to the ISA bus device. The ISA DMA
controller driver functions have been renamed and now take a struct
isa_dma_state *, and are called indirectly by machine-dependent code
which provides the DMA state.
These changes allow e.g. `ofisa' (the OpenFirmware configuration
mechanism for the ISA bus, used by e.g. Sharks) to use the MI ISA
DMA controller code.
- When there is only one pcmcia function, don't use first config
entry to determine card type. Instead, use the config entry
actually used to initialize the pcmcia function if it is already
initialized, else a card is memory-type.
- Don't put a space after cast.
- Use SIMPLEQ_FIRST/NEXT macro.
used in the SMC EtherPower II.
Media control isn't yet supported, due to some MII infrastructure
problems which I hope to address soon. This isn't a huge deal, since
the PHY defaults to auto-negotiate mode.
Also, the device just programs the multicast hash table to accept all
multicast, to avoid a hardware bug that causes the multicast address
filter to lose in 10Mb/s mode. This bug will be fixed in a more sane
way once the media control issues are dealt with.
of last resort when trying to communicate information about
bogus behaviour of PCI devices to the MI autoconfiguration code.
In general, bogus behaviour should be handled by drivers, but there
are some types of bogons which can't be addressed that way. The
only quirk currently defined is one which indicates that the device
is multi-function even though the device's header says otherwise.
(Mmm, Intel 82371FB PCI-to-ISA Bridge (PIIX); you'd think that at least
Intel would have gotten it right...)
of functions on a given device. Also, clean up the #if 0'd
major-debugging-spew code so that it's all one piece, so that
it's a bit prettier, and so that it prints out quirk information.
of last resort when trying to communicate information about
bogus behaviour of PCI devices to the MI autoconfiguration code.
In general, bogus behaviour should be handled by drivers, but there
are some types of bogons which can't be addressed that way. The
only quirk currently defined is one which indicates that the device
is multi-function even though the device's header says otherwise.
(Mmm, Intel 82371FB PCI-to-ISA Bridge (PIIX); you'd think that at least
Intel would have gotten it right...)
printing into a function, add a bit more pretty-printing of existing stuff.
Implement pretty-printers for type 1 and type 2 headers. (Right now,
these are just quick stabs based on some on-line bridge docs that I have
handy on my laptop. Mmmm, meetings. I'll check the bits when I get
back within reach of my official docs.)
release the first 96 bits of the hash directly rather than by folding.
The full 160 bit hash is mixed back into the entropy pool. This keeps
64 bits secret to stir the pool with.
tron