60b62880cc
Add a extern declaration for the mountroot variable.
2002-03-04 02:24:37 +00:00
64c7743a05
Don't "extern int cold;" - this is in <sys/kernel.h>.
2002-03-04 02:19:07 +00:00
47b3797fe7
Don't attempt to gather unrequested statistics.
...
Allow SIOCSWAVELAN with WI_RID_IFACE_STATS to request
an immediate statistics update.
We might in the future want to have SIOCGWAVELAN with
WI_RID_IFACE_STATS return an error if a statistics gathering is in
progress. Then the caller could request fresh statistics and gather
them when they are done. Instead, we currently just return whatever
statistics are available, which may be up to 60 seconds old.
2002-03-04 01:56:12 +00:00
1b7f309f0a
Correct misspellings of "failed".
2002-03-04 01:38:31 +00:00
e9d22f79b0
fix byte swapping when gathering statistics
...
this should complete the fix to pr 14385
AP scanning and statistic gathering should work on le hosts now
2002-03-04 01:33:17 +00:00
918b9d4dec
correctly handle AP scanning result when there are no APs
2002-03-04 01:30:04 +00:00
0dca7b4f6d
used %02x instead of %x when printing out BSS ids
2002-03-04 01:21:07 +00:00
0812667818
s/Faild/Failed/
2002-03-04 01:19:24 +00:00
995081f947
Make this link again in the absence of envsys/sysmon.
2002-03-04 00:55:04 +00:00
e4ca1c8a44
Use the correct pointer for the timeout abort.
2002-03-04 00:53:33 +00:00
42172d9f1c
Try to configure timing correctly.
...
Get rid of some ad hoc debuging printfs.
2002-03-03 22:47:28 +00:00
e0ea696615
* Add support for running the IQ80310 kernel where KERNEL_BASE !=
...
physical memory start. Garbage-collect some cruft while here.
* Move the kernel up to 0xc0000000, giving a 1G/3G kernel/user split.
* Adjust the Integrator startup code accordingly.
2002-03-03 21:22:15 +00:00
e23381908a
inittodr(): Actually initialize time from the file system time.
2002-03-03 21:10:40 +00:00
cb99a5f48e
Implements SIOCNREAD ioctl (some kind of FIONREAD for sockets only). This
...
makes X11 binaries able to actually work: most of them were previously hang
in infinite loop wiaiting for data from the X server because SIOCNREAD
reported that some data where to be read whereas the X server had nothing
to say.
Tested (and works): xlogo, xterm, ghostview (IRIX build). Things are getting
interesting...
2002-03-03 20:12:17 +00:00
d616d3990b
Enable transmit error and EPH interrupt, and reset NIC on EPH interrupt.
...
Fixes a source of lost interrupts.
2002-03-03 18:21:37 +00:00
bf5bf0be48
remove obsolete headers.
2002-03-03 14:59:55 +00:00
0894ee8f62
use GENERIC.
2002-03-03 14:45:21 +00:00
0d29f32a67
clean up config files.
2002-03-03 14:36:48 +00:00
3c9bf76936
make it work correctly when both hd64461uart and hd64465uart are enabled.
2002-03-03 14:35:08 +00:00
7592c6aa95
don't initialize twice
2002-03-03 14:34:36 +00:00
7166e5033d
platform dependent HD64461 PCMCIA module (power supply).
2002-03-03 14:34:00 +00:00
08aefbe07d
remove temporal debug code.
2002-03-03 14:32:21 +00:00
90baa8b206
SR related parts moved to psl.h. cpufunc.h segments.h are removed.
...
kernel mode checking is only SR.MD. no check stack pointer.
2002-03-03 14:31:24 +00:00
17fbf85dc3
machine dependent sysctl are moved to machine/cpu.h
...
dreamcast, hpcsh ... CPU_CONSDEV
mmeye, evbsh3 ... CPU_CONSDEV, CPU_LOADANDRESET
2002-03-03 14:28:48 +00:00
24ebe31f30
remove unneeded configuration.
2002-03-03 14:27:24 +00:00
1181e367e0
Implement pmap_growkernel for arm32 based ports.
...
Note that this has been compiled on some systems, cats, IQ80310, IPAQ, netwinder and shark (note that shark's build is currently broken due to other reasons), but only actually run on cats.
Shark doesn't make use of the functionality as I believe there has to be a correlation between OFW and the kernel tables so that calls into OFW work.
2002-03-03 11:22:58 +00:00
293681cdc3
Rename the bootstrap from netboot to just boot as eventually it will
...
support both network and scsi devices in one binary.
(There are no absolute size restrictions for a PReP-style one-stage
bootloader).
2002-03-03 11:03:43 +00:00
087d3361fc
Define NEWPMAP here if it is not already defined, for the benefit
...
of lkms.
2002-03-03 10:55:35 +00:00
44c52d4714
No longer need to define CACHELINESIZE here, and move NEWPMAP option
...
to std.mvmeppc since the old pmap module is not supported on mvmeppc.
2002-03-03 10:53:10 +00:00
b50fb54af2
Calculate and print the speed of G3 and G4 processors.
...
Add code to read the on-chip temperature sensor on the G3 and hook it in
to the envsys/sysmon subsystem. "envstat" now prints the CPU temperature.
2002-03-03 07:31:33 +00:00
1eeb28024d
Add sysmon data structures to struct cpu_info.
2002-03-03 07:09:09 +00:00
d26c78e764
All Moto PPC revisions should be printed as maj.min (0x0200 -> 2.0).
2002-03-03 07:09:01 +00:00
780a2774c6
The cpu device now requires sysmon_envsys.
2002-03-03 07:04:34 +00:00
de0fe89086
Add sysmon device (62).
2002-03-03 07:02:54 +00:00
e0ba5cf38d
Add initial MPC7455 support.
2002-03-03 06:56:09 +00:00
997374a8dd
Add MPC7455
2002-03-03 06:47:25 +00:00
5d5aeaa547
Add bit definitions for the MMCR's, and event numbers for the events
...
that are common to the G3 and G4.
2002-03-03 06:38:31 +00:00
7a92615001
Correct the SPR numbers of PMC3 and PMC4.
...
SIA wasn't retconned, but the SPR number was wrong. Re-add it, and add
USIA.
2002-03-03 05:32:37 +00:00
c2b8ec655a
Delete the retconned SIAR SPR.
2002-03-03 05:17:48 +00:00
ee2cbbfe4a
Add MPC7xx/7xxx performance monitor control registers (MMCR0-2, UMMCR0-2).
2002-03-03 05:15:44 +00:00
28b2a20fb9
Add bit definitions for the MPC750 thermal management registers.
2002-03-03 04:31:53 +00:00
8c3c52f61d
Provide a definition for DEV_EEPROM so mem.c will compile if SUN4 is defined.
2002-03-03 03:11:06 +00:00
20dd585980
Add RCS ID.
2002-03-02 22:29:40 +00:00
6042c0a3fc
Initial support for KGDB on the sh3.
2002-03-02 22:26:25 +00:00
65af267aeb
Add SH7709A INTEVT2 register define.
2002-03-02 22:25:19 +00:00
ebcb5cdd36
Move the DBSYM bits up in the file.
2002-03-02 22:23:10 +00:00
36c7edfda4
recompile
2002-03-02 22:03:51 +00:00
795a7cf404
WCE210 support.
2002-03-02 22:01:57 +00:00
2a2cc9f493
always open COM1 for the sake of KGDB.
2002-03-02 22:01:34 +00:00
ddf9130f5c
add run-time detection of Windows CE version.
2002-03-02 22:01:05 +00:00
4a513728e8
Add end-of-comment missing in previous.
2002-03-02 21:36:27 +00:00
9de3e943c6
Make reset actually do something and enable the use of the watchdog timer.
...
Losing interrupts no longer will hang the network.
2002-03-02 21:08:04 +00:00
493d3dde20
Add support to query the peer for DNS addreses when negotiating IPCP.
...
Add ioctls to retrieve the results.
While here remove a malloc()/free() of an unused buffer.
2002-03-02 16:23:42 +00:00
a973797a7a
Remove ref to VM_MAXKERN_ADDRESS, it's not used in this file
2002-03-02 15:35:05 +00:00
4fa8495ff4
Update the types, pt_entry and pd_entry should be unsigned, and fixed at 32 bits.
2002-03-02 15:30:49 +00:00
a34187bca3
Also reset segment register 0 on kernel entry: there may not always be
...
a fixed BAT entry covering segment 0, or not completely covering it,
and we do restore it on return to user level already.
2002-03-02 15:19:56 +00:00
dc0a08feaa
Note that Guarded bit is not implemented on the 601.
2002-03-02 15:07:35 +00:00
98eeb8198f
Give block translations to I/O memory the Guarded attribute; from Matt Thomas.
2002-03-02 14:25:02 +00:00
d3b3f3e560
move the COMPAT_SUNOS TIOCGPGRP handling in the compat sunos code proper.
...
this is the final fix needed for it to run properly as an LKM. no more
COMPAT_SUNOS hacks around the tree!
2002-03-02 12:30:43 +00:00
ccc760f047
check _KERNEL_OPT for opt_ddb.h
2002-03-02 12:28:16 +00:00
6cf459ffb5
Add BAT_G to the I/O bats, as per matt@netbsd.org's change for macppc.
2002-03-02 11:01:50 +00:00
29e873a235
Added wsmux_set_display() to fix the problem that wskbd wan't connected
...
to any display if keyboard was attached before display and both aren't console.
2002-03-02 08:22:26 +00:00
b7a4d57a9e
Now all MBR_* definitions come from <sys/disklabel_mbr.h>
2002-03-02 07:05:30 +00:00
6327f7590a
Move MBR_PTYPE_PREP from arch/prep/stand/mkbootimage to here.
...
Add a MBR_FLAGS_ACTIVE too.
2002-03-02 07:04:31 +00:00
a51be40dcb
don't yield the cpu in genfs_putpages() if we're the pagedaemon.
...
pointed out by enami. fixes PR 15784.
2002-03-02 06:58:01 +00:00
68b038f787
Wrap the generation of machine and powerpc links so they don't happen during
...
make obj, clean or cleandir as the proper objdir may not be around yet.
2002-03-02 06:32:28 +00:00
4b948be2fc
Disable BTIC on rev 2.0 or earlier MPC7450s as Motorola Errata #31 for the
...
MPC7450.
2002-03-02 02:18:38 +00:00
102f6b0e48
Make sure I/O bats are set to BAT_I|BAT_G (guarded, cache-inhibited) as to
...
not allow speculative loads to occur within them. This is the cause of the
random MCHKs on 7450 based Mac's.
2002-03-02 00:44:08 +00:00
16cd24dea4
usrptsize was not correct calculated, fixed.
...
Add space to system page table for the UVM kernel area.
This fixes the KVM usage problem that Manuel Bouyer reported a while ago.
2002-03-01 23:55:10 +00:00
35abec3c31
Add -Os and -mcpu=i486 to COPTS. Add VNODE_OP_NOINLINE.
2002-03-01 23:42:20 +00:00
f48c7db878
Two more trivial bug fixes:
...
- copyin() the ntv argument to ntp_adjtime1(), to avoid some panics
- correctly handle the return value
And this still relates to kern/15519
2002-03-01 22:58:33 +00:00
1caa35aa0f
In tcp_segsize(), move a label so that option length is considered
...
when using the default TCP MSS as well. From Matt Thomas.
2002-03-01 22:54:09 +00:00
10444ca48f
In in_savemkludge() and in_restoremkludge(), don't insert into a new
...
list without removing from the old one first.
From Matt Thomas.
2002-03-01 22:51:28 +00:00
5d5c5c0ddd
As siop_morecbd() is called from the kernel thread, protect access to the
...
queues with splbio.
2002-03-01 21:37:03 +00:00
6d484242b0
Regen: add Motorola Raven, Falcon and Hawk product IDs.
2002-03-01 13:48:59 +00:00
b1c2f47c30
Add Motorola Raven, Falcon and Hawk product IDs.
2002-03-01 13:47:30 +00:00
f801cd463b
Rename EBUS_PADDR_FROM_REG uses to EBUS_ADDR_FROM_REG.
2002-03-01 11:51:00 +00:00
a03fa01ccc
Remove EBUS_PADDR_FROM_REG, as it does not realy creates a paddr on sparc.
...
It is superceeded by EBUS_ADDR_FROM_REG.
2002-03-01 11:49:06 +00:00
7d9d648a64
For aesthetical reasons use bus_addr_t instead of paddr_t in the BUS_ADDR
...
makro. Requested by uwe.
2002-03-01 11:34:36 +00:00
ba6fe47ae9
Simplify the way the hardware windows are mapped and adapt the pcmcia
...
chipset functions acordingly. Initialize timing registers (for now to
the slowest possible setting).
Add some debug output. XXX - clean this up.
This is not ready for prime time, but I can attach ray0 and wi0 now in my
LX.
2002-03-01 10:02:38 +00:00
feaf0ddd87
Cast the "io" parameter of BUS_ADDR to paddr_t before it gets shifted.
...
This makes this makro work with smaller values passed for io. No functional
change.
2002-03-01 07:19:29 +00:00
8e4fadc28a
missing splx
2002-03-01 04:19:42 +00:00
3edb75b9d5
unifdef -D__NetBSD__
2002-03-01 04:16:38 +00:00
fa5084d17e
Make this file compiles w/o FWNODE_DEBUG.
2002-03-01 01:01:18 +00:00
8c51a03d7e
If the upper layer says Write/Invalidate is okay, then make sure
...
it's enabled in the PCI CSR.
2002-02-28 23:52:37 +00:00
360cafaddb
Don't add fs->fs_pendingblocks to f_bavail twice. It's already included
...
in f_bfree, which is added to f_bavail.
Fixes problem with statfs reporting too much free space for filesystems
which have files pending to be freed by softdeps.
2002-02-28 21:59:23 +00:00
fc673fcd59
Missed this file when adding mvmeppc port.
2002-02-28 21:54:42 +00:00
1addb1955a
Default to telling the MI PCI code that rd/line, rd/mult, and wr/inv
...
commands are OK.
2002-02-28 21:48:05 +00:00
a16656fe06
Invalidate the access cache when loading a new set of attributes into
...
the atribute cache. Fixes access cache problem seen by
Nathan Funk of the UofS, relayed by Greg Oster.
2002-02-28 21:38:08 +00:00
f58e1d41e1
Regen
2002-02-28 21:10:51 +00:00
f3b42effa5
Add Linksys Wireless USB Network Adapters (WUSB11, both original and ver 2.5)
2002-02-28 21:10:28 +00:00
894ca870b3
use the <sys/conf.h> macro to get the mmap footprint.
2002-02-28 21:00:23 +00:00
75c5a16cfc
Enforce a lower bound of 32 for tcp_mssdflt.
...
This avoids kernel crashes when we don't handle nonsensial values
like 0 gracefully. Better check here once beforehand than having to
check for non meaningful values in time critical paths (like tcp_output).
Fixes PR 15709.
2002-02-28 20:26:17 +00:00
18dfb594ff
These were created by accident (typo), hope this removal does what I
...
expect from the man-page...
2002-02-28 20:08:18 +00:00
2ba5de1eb1
Change the default Rx FIFO drain threshold to 128 bytes; this
...
reduces the likelihood of Rx FIFO overruns on machines with wimpy
PCI busses, while still allowing the interface to burst with a
reasonable size.
2002-02-28 20:08:11 +00:00
759f452292
Don't call m_aux_find() to find a VLAN tag unless VLANs are configured
...
on the interface.
2002-02-28 19:23:03 +00:00
07e108c7dc
* On the DP83820, make sure to make the Tx DMA map large enough for
...
jumbo frames.
* Work around broken PXE firmware on some boards, which leave the ROM
BAR enabled even after the PXE stack has been unloaded.
* Set up the initial values for sc_tx_fill_thresh, sc_tx_drain_thresh, and
sc_rx_drain_thresh in sip_attach(), rather than in sip_init().
2002-02-28 19:10:16 +00:00
f21c737967
Catch up with the latest vrip changes.
2002-02-28 18:26:05 +00:00
b94c8137ab
cpu_reset:
...
Set EXPEVT to 0x20(manual reset) before jump to reset vector.
2002-02-28 18:18:51 +00:00
bbcdfc2583
Use sh3/intcreg.h macro instead of immediate.
2002-02-28 18:17:29 +00:00
simonb