25ae95328f
Use kernel_pmap->pm_pdir instead of PAGE_DIRS_BASE when mapping podule
...
space.
1998-08-28 03:19:34 +00:00
17dcbf485c
More reworking in initarm().
...
Further cleanup and simply the allocation and mapping of the kernel
pagetables and static data pages.
Removed the page directory page table as it is no longer necessary.
Changed the allocation of the proc0 L1 page table and L2 page table
that maps the page tables to map these pages into kernel virtual
address space.
Updated for pv_addr_t argument changes to pmap_bootstrap().
1998-08-28 02:58:41 +00:00
133f5c93f0
Updated for pmap_bootstrap() argument change. Modify ofw_configmem()
...
to obtains pv_addr_t structures for the proc0 L1 page table and the proc0
pagetable that maps page tables.
Use the virtual address from the pv_addr_t structure for the proc0 L1 page
table when calling pmap_bootstrap rather than relying on a special mapping
at PAGE_DIRS_BASE.
Modify ofw_construct_proc0_addrspace() for similar changes to
ofw_configmem().
Remove the kernel_pde page table in ofw_construct_proc0_addrspace() as it
it now longer needed.
1998-08-28 02:52:37 +00:00
1ca0ef8cae
Modify the arguments to pmap_bootstrap() to take a pv_addr_t structure
...
for the page table to map kernel pagetables (kernel_ptpt). This means
that the pm_vptpt field is now valid for the kernel_pmap.
Use constants from vmparam.h in pmap_allocpagedir().
1998-08-28 02:46:51 +00:00
7e95972ed1
Add `audiocs' ("SUNW,CS4231") and `en' ("ENI-155s").
1998-08-27 20:56:44 +00:00
6baebf57c6
Nuke egcs warns: void main(), implicit int
1998-08-27 12:20:51 +00:00
713a7dc9c3
oops, remove old isp attachment here..
1998-08-27 11:47:12 +00:00
396330e186
remove sparc64 "options BUS_DMA" -- it is now standard
1998-08-27 11:43:14 +00:00
82571f5403
move isp sbus attachment to dev/sbus
1998-08-27 11:41:24 +00:00
bd85d62257
move isp sbus attachment to dev/sbus and support it on the sparc64
1998-08-27 11:40:06 +00:00
f8a4876874
Add on-board video information for the LC III, and a guess
...
at the LC II based on similar machines mentioned in the dev note.
1998-08-27 07:31:34 +00:00
a465fdedc6
Add 64-bit pmap support:
...
Moved from a two level 512/1024 entry setup mapping 32 (9/10/13) bits
respectively to a three level 1024/1024/1024 entry setup mapping 43
(10/10/10/13) bits. In 32-bit mode we waste about 1/12 pages mapping the high
11 bits. We also only manage 43 of the possible 44 bits of virtual address
space, wasting half of it. Oh well, maybe we'll do better next revision.
1998-08-27 06:23:31 +00:00
c5695ed630
Centralize the definition of pv_addr_t to pmap.h
1998-08-27 04:00:53 +00:00
af91a82f1e
Remove pv_addr_t and systempage declarations.
1998-08-27 03:58:10 +00:00
e7a61c9984
Centralise the definition of the pv_addr_t structure.
1998-08-27 03:55:06 +00:00
7308faf67b
"COMPAT_11 + COMPAT_12 + COMPAT_13" doesn't work - these are based on
...
definition, not 1 or 0. Also, since all pre-1.4 releases require
COMPAT_13 (not just 1.3 binaries), just "#ifdef COMPAT_13".
1998-08-26 14:51:57 +00:00
df94d3f4f5
Add AdvanSys SCSI controller
1998-08-26 14:27:44 +00:00
c5b4ddc051
Add more opl attachments.
1998-08-26 13:37:49 +00:00
a40fb261e6
deal with no DDB
1998-08-26 12:41:47 +00:00
446bcd99d6
panicstack: is needed outside of DEBUG. use _C_LABEL, and printf not db_printf (incase no ddb!)
1998-08-26 12:37:35 +00:00
9deb19798f
Add OPL driver.
1998-08-26 12:10:57 +00:00
a890d2dd7f
Add MD DELAY and spl routines to fit Nisimura's change.
1998-08-26 12:07:21 +00:00
1c3e72cd0e
Back out previous change.
1998-08-26 11:44:06 +00:00
8912df90bf
fix missed sparc -> sparc64
1998-08-26 10:36:42 +00:00
e791891d53
- use UVM by default.
...
- clean up the Makefile a bit to be less solaris-centric :)
- add support for compat_sparc32 (32bit compat module for NetBSD/sparc). this
isn't yet fully tested but it mostly written and compiles if not totally
links yet.
1998-08-26 10:31:36 +00:00
76567c8213
Remove ad1848 attribute; it's in conf/files now.
...
(Why don't we remove the XXX hack in this file?)
1998-08-26 09:32:24 +00:00
8ea67882ab
make this actually work
1998-08-26 09:09:31 +00:00
be25ea2fb5
put pmapdebug usage inside #ifdef DEBUG
1998-08-26 07:55:10 +00:00
4fa399d4db
vm_offset_t -> {paddr_t,vaddr_t}, vm_size_t -> vsize_t
1998-08-26 04:54:17 +00:00
7cfa6e0972
Always use pmap_kremove() if removing a mapping from the kernel pmap.
1998-08-25 23:09:08 +00:00
47e470f2af
Use UVM as standard.
1998-08-25 22:07:46 +00:00
34f8ef18c9
Updated for changes to some of the constants defined in vmparam.h
...
Simplified serveral parts of the initarm() to make the code clearer and
modified parts of initarm() as part of an on-going effort to abstract
out part of initarm() on various machines.
1998-08-25 22:03:07 +00:00
61bd706797
Include machine/vmparam.h
1998-08-25 21:56:14 +00:00
bd14bb41f0
Define KERNEL_PD_SIZE in terms of various constants defined in vmparam.h
1998-08-25 21:55:06 +00:00
cda0e37703
Collect various kernel constants together and define them in all one
...
place (some moved from param.h)
Define several constants such as page table addresses in terms of other
constants.
Increase some of the limits :
MAXTSIZ 8MB -> 16MB
DFLDSIZ 16MB -> 128MB
MAXDSIZ 256MB -> 512MB
DFLSSIZ 512KB -> 2MB
1998-08-25 21:53:37 +00:00
4e8239cdca
Removed a number of kernel constants as they have moved to vmparam.h
1998-08-25 21:50:54 +00:00
b42b94b608
Shave yet more translation ops from the inner loops of pmap_protect().
1998-08-25 18:21:17 +00:00
218681f3e5
Kernel stach should be 4K, not 32K. Increase MCLSHIFT to 11.
...
Remove ovbcopy().
1998-08-25 17:35:23 +00:00
fb5e3aef9b
For the pc532 MACHINE (pc532) isn't equal to MACHINE_ARCH (ns32k) but there
...
is no sys/arch/ns32k.
1998-08-25 11:52:26 +00:00
2fa5652849
Break the code that cleans out page tables from pmap_remove_mapping() into
...
separate functions that perform the cleanout starting at the l3pt, l2pt,
or l1pt.
1998-08-25 09:00:19 +00:00
af5a3e52a5
yanko
1998-08-25 08:28:53 +00:00
33caa59da3
Optimize the pmap_protect() loop. Will make a similar change to pmap_remove()
...
once some changes are made to how pt pages are cleaned up.
1998-08-25 08:00:15 +00:00
b7fb6e1711
Change pmap_changebit() to take a mask of bits to set, and a PTE mask,
...
shaving several instructions out of the inner loop.
1998-08-25 06:21:16 +00:00
daa8ad1747
Add some braces to make egcs happy.
1998-08-25 04:56:01 +00:00
2d981dac3b
The return value from intr_dispatch() is no longer necessary.
1998-08-25 04:03:56 +00:00
2aa56b1c61
Implement splaudio().
1998-08-25 03:59:01 +00:00
f920e4e2d6
In physconinit(), don't use printf() to clear the screen but call
...
the console's putstring function directly.
1998-08-25 03:26:36 +00:00
b75234f009
Add calls to cpu_cache_cleanID() after calling setttb() during initarm().
...
This is necessary as the memory addresses being used for the cache clean
(if the CPU is a SA110) may have been remapped by the setttb() call and
thus the cache could loose sync with memory.
1998-08-25 03:10:25 +00:00
e37ce1c5b6
Make spl(9) rountines target port dependent. delay() is also port
...
dependent anticipating a target with high resolution timer available
for on-the-fly re-programming. Enum decstation_t was removed from MI
trap.c.
1998-08-25 01:55:38 +00:00
9c3e900094
Use the pool allocator for pmap structures.
1998-08-25 01:46:01 +00:00
7ff538b614
Oops, use M_VMPMAP as the malloc type in pool_init().
1998-08-25 01:11:11 +00:00
4dfff51650
Use the pool allocator to allocate pmap structures.
1998-08-25 01:09:04 +00:00
04232f6196
declare end[] everywhere the same, fix an egcs "missing braces" warning.
1998-08-24 22:52:23 +00:00
103b7e7b17
The Intel 82371MX identifies itself erroneously as a miscellaneous bridge.
...
(from "Johnny C. Lam" <lamj@stat.cmu.edu> per PR kern/6021)
1998-08-24 19:27:05 +00:00
c6905522d2
These files are no longer used.
1998-08-24 07:23:10 +00:00
b3e9be0ee3
egcs warning fixes, clean up `register'
1998-08-24 02:37:16 +00:00
62ed825858
vm_offset_t --> [pv]addr_t.
1998-08-24 01:40:26 +00:00
d395d34886
Work on 32-bit cleanup.
1998-08-23 15:52:43 +00:00
41fb08c335
Added pv_syncflags() (unused) and debug stuff.
1998-08-23 15:51:23 +00:00
a579357e66
Remove dvma_mapin() and other cruft.
1998-08-23 15:49:02 +00:00
66795e62e7
Move sparc_vme_dmamem_map() outside `#ifdef SUN4M'
1998-08-23 10:40:38 +00:00
4539119e83
Nuke phys_map & old dvmamap.
1998-08-23 10:08:25 +00:00
4fe6cdf6ca
Nuke obsolete prototype.
1998-08-23 10:07:09 +00:00
2a6be00de5
Rename DVMA constants.
1998-08-23 10:05:53 +00:00
666587112f
Use bus_dmamem_{alloc,free} instead of the old VM hack.
1998-08-23 10:04:56 +00:00
e68fd96987
Remove DVMA address special cases in pv_changebit().
1998-08-23 10:01:24 +00:00
434a2cc972
Nuke phys_map & old dvmamap.
1998-08-23 09:59:24 +00:00
9a2b941ecb
Rename DVMA constants.
1998-08-23 09:53:03 +00:00
5e1f92b621
64-bit clean cleanup of ofwboot.elf.
1998-08-23 02:48:28 +00:00
c29fdceff3
Prepare for MIDI devices.
1998-08-22 22:50:53 +00:00
edab5330c3
Fix typo in previous fix.
1998-08-22 22:45:19 +00:00
9f5435229a
64-bit-ify this. Depend on _lp64.
1998-08-22 22:16:01 +00:00
592953d009
Fix tyop.
1998-08-22 18:11:25 +00:00
c54c62ad31
bsd_audioio.h is not used.
1998-08-22 15:56:46 +00:00
7f4ad4748e
Eliminated vm_offset_t and vm_size_t.
1998-08-22 14:38:36 +00:00
e727d1e031
Must #define __warn_references if not GNUC.
1998-08-22 12:12:38 +00:00
a84a67440f
vm_offset -> [vp]addr_t and vm_size_t -> [vp]size_t
...
While I'm here, expunge use of 'register' storage class.
1998-08-22 10:55:33 +00:00
00475fbb1f
New times, new pagesize, use magic number in exec header.
1998-08-22 09:16:45 +00:00
9237e1254f
Take a stab at support for the PowerBook 190/190cs, based on comparison
...
with other PowerBook hardware. They seem to be most closely related
to the PowerBook 500-series, but have an internal IDE disk instead.
NOTE: only external SCSI disks have a chance of working, at this
point. Nothing has officially changed with regard to IDE support
(yet).
1998-08-22 06:06:05 +00:00
f234add115
Add gestalt machine type for the PowerBook 190/190cs.
1998-08-22 05:47:37 +00:00
9948205c5a
Prepare for support of Apollo-cpuboard-reworked A3000 mainboard SCSI.
1998-08-21 19:13:27 +00:00
ae8175cb09
Workaround for the incomplete fastmem loading scheme: put uptbase lots higher,
...
so that hopefully it doesn't get overwritten by the 1:1 mapped kernel copy.
See line 375 for an explanation.
1998-08-21 18:51:58 +00:00
5a294dbb55
Add missing "-a" to mkdep line for locore_machdep.S.
1998-08-21 16:24:25 +00:00
d4d7416198
vm_offset_t --> [pv]addr_t.
1998-08-21 16:13:28 +00:00
f6dcf3f9c6
Change vm_offset_t to [pv]addr_t.
1998-08-21 14:52:29 +00:00
79dd1e8563
Convert to [pv]addr_t & [pv]size_t.
1998-08-21 14:13:53 +00:00
b8a1caac4a
Convert to [pv]addr_t & [pv]size_t.
1998-08-21 14:12:18 +00:00
24255abca0
iommu_{enter,remove} moved to iommuvar.h
1998-08-21 14:10:42 +00:00
ca5b5652b4
Remove vm_offset_t & vm_size_t.
1998-08-21 14:09:59 +00:00
f318f15bc3
Convert to [pv]addr_t.
1998-08-21 14:07:37 +00:00
5bcec15811
Add #ifdef DDB around Debugger();
1998-08-21 14:07:03 +00:00
6aba9c11ff
VAX logical page size increased to 4k.
1998-08-21 13:46:38 +00:00
33395d926e
Remove an extraneous printf when attaching a Valkyrie.
1998-08-21 13:46:31 +00:00
b3574d3923
VAX logical page size increased to 4k.
1998-08-21 13:41:09 +00:00
7575f8fac5
Move iommu_enter/iommu_remove here from <include/cpu.h>.
1998-08-21 13:29:57 +00:00
057ca9bfe1
No longer used.
1998-08-21 13:22:25 +00:00
5617a263e0
Correctly initialize scb struct.
1998-08-21 13:19:43 +00:00
f1a6a0936f
The VAX46 (VS4000) needs the clock stuff the VAX43 does...
1998-08-20 23:52:42 +00:00
02d030ca52
Pass on `NOWAIT' and `boundary' args to extent_alloc().
1998-08-20 20:49:33 +00:00
363b678b9e
Flesh out more of the sun4 busdma functions.
1998-08-20 20:46:59 +00:00
02c059eefa
Pay attention to BUS_DMA_NOWAIT & boundary args where appropriate.
1998-08-20 20:45:40 +00:00
ff2c3adddc
Add some braces to stop the new egcs warnings.
1998-08-20 19:55:06 +00:00
fb9171df3d
Fix write/read of memory.
1998-08-20 16:47:11 +00:00
b27d106197
Match grf_obio devices correctly for the 58x/63x.
1998-08-20 13:58:04 +00:00
aee27828f9
Some machines (Voyagers) apparently have zs devices with multi-valued
...
register properties in the PROM.
1998-08-20 11:47:39 +00:00
a6d3fb3799
vm_offset_t -> {paddr_t,vaddr_t}, vm_size_t -> vsize_t
1998-08-20 08:33:41 +00:00
f73a7043f3
ISA Game port driver, lifted from BeBox port.
1998-08-20 06:31:34 +00:00
b176b7ba0f
Add joy driver at cdev 56.
1998-08-20 06:30:56 +00:00
31ac3d022c
Add joy driver devsw declarations.
1998-08-20 06:28:43 +00:00
2d282c7e70
Add joy driver glue.
1998-08-20 06:28:18 +00:00
cc042ba0e5
Correct a function name in a panic message.
1998-08-20 05:46:20 +00:00
5232b66bd5
Initial steps to getting the VAX to use the MI driver framework.
1998-08-18 23:55:00 +00:00
ff266f0937
Add some braces to make egcs happy.
1998-08-18 18:23:07 +00:00
a76eb95be9
Tab vs. space, and turn *off* XSERVER_DDB by default.
1998-08-18 17:03:42 +00:00
2ce88694c7
Do not include files.isapnp, this file is now included from files.isa...
...
(Julian Coleman)
1998-08-18 11:51:07 +00:00
cf3457cb9d
Add some braces to make egcs happy (ambiguous else warning).
1998-08-18 07:53:47 +00:00
47cf1b0e0a
Circad Leonardo video driver by 'maximum entropy'.
1998-08-18 07:45:02 +00:00
136e58fb9f
Internal cleanup.
1998-08-17 22:35:04 +00:00
5e04cc8bb7
Internal bus_dma cleanup.
1998-08-17 22:33:09 +00:00
fb0cc46daf
Internal cleanup.
1998-08-17 22:30:08 +00:00
4396c67463
Internal cleanup.
1998-08-17 22:28:00 +00:00
cd09067eb4
* Redo the way the way the MIDI driver attaches to audio devices.
...
* Improve the midisyn layer a little.
* Add a driver for the Yamaha OPL[23] FM synths.
The opl driver is not finished yet; it sounds pretty awful.
For some strange reason I cannot get any FM sound from my SB64 cards,
but a regular SB16 works fine.
1998-08-17 21:16:09 +00:00
0809175887
#define _CS_OFISA_MD_REG_FIXUP
1998-08-17 20:40:53 +00:00
defb1b327e
Implement a reg fixup, needed for old OpenFirmware builds.
1998-08-17 20:38:08 +00:00
e7a551d60e
Some internal cleanup; pass a tag around, not individual arguments.
1998-08-17 20:15:55 +00:00
45bcd0fe79
Update comment after cut and paste.
1998-08-17 15:04:51 +00:00
a1ac68819f
Assign my copyrights to TNF.
1998-08-17 00:26:32 +00:00
9ec98c99ae
Added elf64 support (I hope).
1998-08-16 23:30:00 +00:00
19a5912587
Remove the 'fast' return from intrhand().
1998-08-16 22:29:03 +00:00
708c5f826e
Add missing wint_t (currently unused).
1998-08-16 17:16:56 +00:00
201603f86e
Hopelessly out of date, esp. now that we follow the standard
...
installation procedure.
1998-08-16 15:39:58 +00:00
445aefc354
Switch to using the common m68k stuff for a couple of things:
...
. cache control functions <m68k/cacheops.h>
. sigreturn code <m68k/m68k/sigreturn.s>
Also a few of other things found while scouting around for vm_offset_t
changes.
1998-08-16 15:33:48 +00:00
573f3aee5c
Enable 115200 and (untested)230400 bps.
1998-08-16 11:24:36 +00:00
da5ce9387c
Remove semicolons from the end of bus_space_*_multi_*(). From Ken Nakata
...
in PR 5965.
1998-08-16 05:36:17 +00:00
518c6812d3
Block user space access between the cache purge and the context switch in
...
cpu_switch() as all user space addresses must be removed from the cache
prior to the context switch and interrupts are live for the purge.
1998-08-16 02:17:17 +00:00
0e4dc30457
As ovbcopy & bcopy are now done in terms of mem* routines, it makes
...
no sense to "#define ovbcopy bcopy".
1998-08-16 02:15:50 +00:00
2ea34b589c
Enable interrupts during cache clean, purge and sync operations.
...
Instead use a flag to indicate that all user space access are blocked
during the cache op to ensure that user space virtual addresses correctly
expunged from the cache.
1998-08-16 02:14:15 +00:00
decc2dde0a
Implement a mechanism to prevent fuswintr() and suswintr() from accessing
...
user space via a flag. This enables interrupts to be live during certain
critical operations where user space accesses must not be attempted.
1998-08-16 02:11:32 +00:00
152c00c687
Enable interrupts as soon as possible in prefetch_abort_handler(),
...
beore any of the diagnostic checks etc.
1998-08-16 02:03:30 +00:00
d83571ea08
Enabled interrupts as soon as it possible in syscall(), before any
...
of the diagnostic checks.
1998-08-16 02:01:16 +00:00
961641ad2d
We claim to support some mii-equiped pci ethernet drivers, so we
...
need to include dev/mii/files.mii. :-)
1998-08-16 01:40:29 +00:00
8e5a13f5f0
Avoid double fault on errors during probes
1998-08-16 00:42:51 +00:00
c529c40718
Normalize the copyright notice on this file.
1998-08-15 20:42:25 +00:00
d07b3639a4
Assign my copyrights to TNF.
1998-08-15 17:47:15 +00:00
62b1bf3e2e
Assign my copyrights to TNF.
1998-08-15 10:51:16 +00:00
228f894ea2
This code was written by Jason.
1998-08-15 10:38:03 +00:00
530fef3c8d
Assign my copyrights to TNF.
1998-08-15 10:34:43 +00:00
6dc903202f
Assign my copyrights to TNF.
1998-08-15 10:10:47 +00:00
4b02e4134c
Initialize and enable an interrupt handler, which currently doesn't
...
actually do anything.
1998-08-15 07:42:50 +00:00
129cbf95ee
Minor edit.
1998-08-15 05:16:41 +00:00
c9a799adf6
Assign my copyrights to TNF.
1998-08-15 04:57:50 +00:00
cc8a78e783
Assign my copyrights to TNF.
1998-08-15 04:42:42 +00:00
cdf829a998
Assign copyrights to TNF.
1998-08-15 04:22:45 +00:00
b2827b9d36
Assign copyright to TNF.
1998-08-15 04:16:55 +00:00
239bc62b37
Add a makefile.
1998-08-15 03:57:58 +00:00
df9baf2311
Assign copyrights to TNF.
1998-08-15 03:51:30 +00:00
08ab3f8338
I didn't write any of this.
1998-08-15 03:36:34 +00:00
6d3d8a1350
Make copyright notices with my name consistent.
1998-08-15 03:02:31 +00:00
2b869a383f
Use _CS_OFISA_MD_* callbacks for old, broken OpenFirmware builds.
1998-08-15 02:59:01 +00:00
2a48768678
Debug inst_unconditional_flow_transfer and next_instr_address
...
macros so that single stepping works correctly.
1998-08-15 02:57:28 +00:00
d5df55112a
vm_offset_t -> {paddr_t,vaddr_t}, vm_size_t -> vsize_t
1998-08-14 16:50:00 +00:00
97e83f6e0b
Change the "vm_offset_t"s to "u_long"s for now; eventually, we can make
...
them vaddr_t and paddr_t, as appropriate (after scouring the RPB docs
to know which are phys and virt addresses).
1998-08-14 16:46:09 +00:00
170eadd04c
Add FILECORE filesystem.
1998-08-14 03:56:21 +00:00
4283228f33
Make message less confusing
1998-08-14 02:20:07 +00:00
f41c00629b
Garbage-collect vm_offset_t and vm_size_t.
1998-08-13 21:36:27 +00:00
330d142f16
vm_offset_t -> {vaddr_t,paddr_t}, vm_size_t -> vsize_t
1998-08-13 21:36:02 +00:00
e829016cba
Keep d_ncylinders correct
1998-08-13 18:18:54 +00:00
d0153a96fe
The sense of the pccons_is_console test is backwards
1998-08-13 18:00:05 +00:00
0430a2cf75
Include db_dbgregs.s for ddb
1998-08-13 17:55:41 +00:00
1ae4d7da86
Allow inb/outb and friends to be called from debugger.
...
Crude access to x86 hdw "debug" registers.
1998-08-13 17:54:15 +00:00
67390e1ee2
Make serial line debugging easier to enable and use
1998-08-13 17:41:10 +00:00
18b4602fd5
Add a comment regarding the broken behavior of the DAFB v7.
1998-08-13 13:45:33 +00:00
0acc329dad
Remove ``#define ovbcopy bcopy''. This exists in sys/systm.h now.
1998-08-13 06:21:38 +00:00
a750861e5d
Mask interrupt by hardware register if possible.
1998-08-13 06:18:27 +00:00
a2dd74ed79
Merge paddr_t changes into the main branch.
1998-08-13 02:10:37 +00:00
8b950c2a65
Get rid of AMIGA_UPTBASE.
...
Replace it by a variable, which is initialized in amiga_init.c.
This will make the kernel actually work even if we have lots of Zorro-III
(or DraCo direct bus) i/o space.
1998-08-12 19:46:12 +00:00
f903600948
Add audio at ess.
1998-08-12 18:32:18 +00:00
8415989ddf
Add the PC speaker MIDI attachment.
1998-08-12 18:17:55 +00:00
53907fe5a1
Support Cabletron Ethernet card, from John Marohn in PR 5762.
1998-08-12 07:19:09 +00:00
5a94869995
New framework for handling processor interrupts, derived in part from
...
the hp300 port.
- Interrupts 3-6 use this immediately. Interrupt 7 is a special case,
and the VIA interrupts (1 and 2) will be addressed when that code is
rototilled.
- Modify the zs front end to register with the appropriate interrupt
controller: through the PSC on the AV Quadras, and direct to
interrupt 4 on the rest. Arrange to have the appropriate zsc_softc
supplied to us at interrupt time.
- Modify the direct ADB driver (and its PowerManager cousin) to call
intr_dispatch(), rather than zshard(). XXX This is a kludge, but at
least limits the brokenness to the ADB drivers, now.
As a side effect, this should fix PR 5590. Thanks to Bill Studenmund for
correctly determining the cause of the problem reported there.
1998-08-12 06:58:42 +00:00
3e40b6ff15
A simple, obvious optimization, now that the loop has been
...
removed from zshard(). Pointed out by Bill Studenmund.
1998-08-12 06:55:24 +00:00
7f2ca20fd9
New framework for handling processor interrupts, derived in part from
...
the hp300 port.
- Interrupts 3-6 use this immediately. Interrupt 7 is a special case,
and the VIA interrupts (1 and 2) will be addressed when that code is
rototilled.
- Modify the zs front end to register with the appropriate interrupt
controller: through the PSC on the AV Quadras, and direct to
interrupt 4 on the rest. Arrange to have the appropriate zsc_softc
supplied to us at interrupt time.
- Modify the direct ADB driver (and its PowerManager cousin) to call
intr_dispatch(), rather than zshard(). XXX This is a kludge, but at
least limits the brokenness to the ADB drivers, now.
As a side effect, this should fix PR 5590. Thanks to Bill Studenmund for
correctly determining the cause of the problem reported there.
1998-08-12 06:52:56 +00:00
b2dc905572
The Performa/LC 58x have a Valkyrie, not the DAFB.
1998-08-12 06:50:37 +00:00
69c09f978c
Be ever so slightly more careful when determining where and what size
...
the frame buffer is.
1998-08-12 06:48:05 +00:00
3e2efa4365
Fix a prototype tyop spotted by Bill Studenmund: s/clnintr/clnlintr/
1998-08-12 06:46:57 +00:00
7d09ad09b4
New framework for handling processor interrupts, derived in part from
...
the hp300 port.
- Interrupts 3-6 use this immediately. Interrupt 7 is a special case,
and the VIA interrupts (1 and 2) will be addressed when that code is
rototilled.
- Modify the zs front end to register with the appropriate interrupt
controller: through the PSC on the AV Quadras, and direct to
interrupt 4 on the rest. Arrange to have the appropriate zsc_softc
supplied to us at interrupt time.
- Modify the direct ADB driver (and its PowerManager cousin) to call
intr_dispatch(), rather than zshard(). XXX This is a kludge, but at
least limits the brokenness to the ADB drivers, now.
As a side effect, this should fix PR 5590. Thanks to Bill Studenmund for
correctly determining the cause of the problem reported there.
1998-08-12 05:42:44 +00:00
63526c1ff1
New and improved console framebuffer initialization and autoconfig. This
...
resolves a great many issues, including Performa 58x interrupt handling
and offset displays on some models.
Programs that depend on the old (pre-NetBSD 1.1) grf interface may break.
That's actually a separate issue uncovered by this code, not caused by it.
1998-08-12 02:36:36 +00:00
3ad4ac45f9
Reworked interrupt blocking and unblocking to improve interrupt latencies
...
during context switches.
1998-08-12 01:10:29 +00:00
5ad5bb35af
minor change to make the message less linux like
1998-08-12 00:03:23 +00:00
b3e5811a08
Patch from Takashi NAKAMURA <QZM00427@nifty.ne.jp> to support the
...
Contour 3-button mouse from the Contour Design Corp.
It looks like a Microspeed mouse.
1998-08-11 20:07:59 +00:00
f3dd6e430b
Pull in files.mii
1998-08-11 18:52:52 +00:00
2c639fb882
Cache and microsecond clock resolution on KA46.
1998-08-11 17:52:57 +00:00
557c338959
Add CCITT & NATM interrupt handlers. (Jonathan Stone).
1998-08-11 12:22:57 +00:00
6617ede128
KERNEL_RELOC -> RELOC_KERNEL (Entropy)
1998-08-11 07:05:46 +00:00
cf231bf251
Adapt to MII changes.
1998-08-11 00:28:53 +00:00
f8dd65f3f5
Fix ommision in last backout.
1998-08-10 20:23:50 +00:00
c81476c89d
ISDN Blaster / Master: ZBus attachment / SUPIO driver.
1998-08-10 18:53:31 +00:00
e5439fc15b
Back out last change --- it doesn't work this way
1998-08-10 18:43:06 +00:00
0a1a20bd29
Recognise STRH, STRSH and STRSB instructions as store instructions when
...
determining page protections for [u]vm_fault(). Fixes bug spotted by
Richard Earnshaw.
1998-08-10 15:15:49 +00:00
9f13823e62
Support for VS4000/60. Some needs-count -> needs-flag.
1998-08-10 14:48:53 +00:00
c355f4a0ed
Support for VS4000/60.
1998-08-10 14:47:16 +00:00
2ff84b0fe4
Kickoff xmit interrupts, needed on chip DC7201.
1998-08-10 14:41:16 +00:00
972b94efc4
Basic support for VS4000/60.
1998-08-10 14:31:07 +00:00
86fe068843
Add ess at isapnp.
1998-08-10 01:54:59 +00:00
ca7ad3aff1
make this compile in a not SUN4M world.
1998-08-09 23:37:12 +00:00
878203d616
Cosmetics: it's a "HyperCom 3Z" on a ZBUS, no "HyperCom 3".
1998-08-09 22:25:18 +00:00
98f1a01dec
Actually probe the hardware.
...
This is for HyperCom 3i slaveboards (to be done soon) that might or might not
sit on top of a HyperCom 3Z or HyperCom 4 or ISDN Blaster.
1998-08-09 22:08:40 +00:00
64e4a1fa7d
Support video interrupt for GrandVimage 17iL video card.
1998-08-09 18:19:09 +00:00
b872f9b8e7
avoid lint error.
1998-08-09 12:47:27 +00:00
093a8daf6b
Go to splhigh in the debugger.
1998-08-09 00:00:57 +00:00
e2686d0a1b
Use splnet, not splimp.
1998-08-08 23:51:39 +00:00
d5eb56b2c2
Move splclock and splaudio outside splimp.
1998-08-08 23:39:38 +00:00
09502c9fb2
Fix -Werror compilation failure due to lack of a couple of 'const's.
1998-08-08 20:57:55 +00:00
e9534620b0
Netboot support for KA46 (VS4000/60).
1998-08-08 16:10:41 +00:00
88191aeeee
Reduce this file as done in the Alpha RAMDISK configuration, which makes
...
keeping it in sync less prone to errors.
1998-08-08 12:59:43 +00:00
8fdb1c8ebe
Lots of kernlib functions rewritten as inline macros.
1998-08-08 11:18:32 +00:00
a6b5ab0c92
Moved parioctl.h to the system header directory.
1998-08-07 16:16:36 +00:00
4c4cdda003
Switched to MI zs driver.
1998-08-07 11:19:13 +00:00
dabc8eb436
Implement the 'i' flag which makes the bootloader ask for the file to
...
load (as in OSF/1).
Useful for netboot where "-file" doesn't work as needed.
1998-08-07 10:38:37 +00:00
e8564df3b9
implemt a simple "beep" device to access the ISA speaker
1998-08-07 10:26:38 +00:00
026fbbe2db
Match PCI-ISA bridges on class/subclass instead of vendor/device.
...
2 reasons:
-no need to keep a list of all known parts
-there is at least 1 bridge (ACC micro 2051) which reports the same
device ID for its various subfunctions; this would require an additional
check in the match function
(keep the old list inside #if 0 in case one of the historical bridges
doesn't report the right class/subclass - I can't check them all)
1998-08-07 10:15:32 +00:00
48bae9ee88
Add MIDI support. The MIDI devices can be accessed as ``raw'' through
...
the /dev/rmidiN devices, or with a sequencer interface via /dev/music.
So far the only supported MIDI device is the MPU401 port on SoundBlaster
(and only on SB on isapnp, since we do not have locators with multiple
values yet).
1998-08-07 00:00:55 +00:00
d082dd3db4
Moved grfioctl.h and iteioctl.h to the public include directory.
1998-08-06 14:08:53 +00:00
546365a27e
_POSIX_SOURCE -> _POSIX_C_SOURCE
1998-08-06 11:25:04 +00:00
709dda58f8
_POSIX_SOURCE -> _POSIX_C_SOURCE, and add missing protection bits.
1998-08-06 11:22:57 +00:00
e2a897639d
KNF (only include one of <sys/{param,types}.h>).
1998-08-05 16:50:39 +00:00
d8582601c5
Make panic message a little more explicit.
1998-08-05 16:34:36 +00:00
4df8f47ebc
Switched to MI zs driver.
1998-08-05 16:08:33 +00:00
e8551dcab3
Fixed stray pointer access reported by Yasufumi Itoh.
1998-08-05 15:57:43 +00:00
89f91f85fa
Fixed typo.
1998-08-05 14:40:20 +00:00
c3579ce3f5
bzero->memset, bcopy->memcpy, bcmp->memcmp
1998-08-05 02:45:08 +00:00
54f97ab9d1
bzero->memset, bcopy->memcpy
1998-08-05 02:28:26 +00:00
584757c02b
bzero->memset
1998-08-05 02:11:00 +00:00
bf0943278c
Fix a problem first noticed by a user with a screwed up real time
...
clock past the End of Time.
If time_t is 32 bits, then the "End of Time" is Jan 18/19 2038
(depending on time zone).
This code copes with RTC's past the end of time if time_t is an int32
or less. It just forces the time back to 2037. This will let users
with screwed up clocks to at least boot and function long enough to
set their clocks to something sane.
This kludge is conditioned on an
if (sizeof(time_t) <= sizeof(int32_t))
which will automatically optimize the code out once we switch time_t
to a 64 bit quantity, which should happen well before 2037.
Patch based on code from Michael C. Richardson, with help from
Allen Briggs who pointed out a fencepost error.
1998-08-05 01:21:54 +00:00
9186d2da5c
Simple instrumentation of pmap_steal_memory().
1998-08-04 22:40:17 +00:00
71c8693225
Add missing "-a" to mkdep line for pmax locore_machdep.S.
...
From Noriyuki Soda.
1998-08-04 20:17:09 +00:00
25997dd19d
IPL_TTY -> IPL_SERIAL.
1998-08-04 20:09:37 +00:00
b6ffd3a85e
Don't call cpu_tlb_flushID() from the pmap_update macro.
1998-08-04 19:11:29 +00:00
e9545cf241
Fixed memory probe for color turbo machines.
1998-08-04 19:08:23 +00:00
167a777474
Drop in the lastest round of optimisations from Neil Carson.
...
The cache cleaning code in pmap_copy_page() and pmap_zero_page()
has been rewritten and uses a new function pmap_clean_page().
pmap_remove() has been completely rewritten to make it more efficient
when there are only a few pages that actually need to be removed.
1998-08-04 19:02:19 +00:00
b72d8d17f9
__BROKEN_INDIRECT_CONFIG fixes.
1998-08-04 16:51:51 +00:00
ea7f1dbe36
Some files were not deleted with make clean.
...
Keymap files are now installed in /usr/share/keymaps/x68k.
1998-08-04 16:39:55 +00:00
47ac4421e0
In setregs(), only pass the stack value in r12 if COMPAT_1[123] is defined.
1998-08-04 16:25:28 +00:00
4b14908352
Fix the validation of source addresses in db_read_bytes() so that
...
memory ranges mapped with L1 section mappings do not cause aborts
due to lack of L2 page table.
1998-08-04 16:19:54 +00:00
e9c872cd6b
Define a macro L1_MASK to mask out the level 1 pde type bits.
1998-08-04 16:16:22 +00:00
aced90770c
Message fixes.
1998-08-04 16:10:45 +00:00
233cd5d60b
RB_POWERDOWN is now supported.
...
Check if the power switch is open (off) in the shutdown_hook,
and try removing the power in cpu_reboot.
poffd default action is now shutdown -p.
1998-08-04 16:07:53 +00:00
3dc1e8147c
Kill "options FIFO" - they're mandatory now.
1998-08-04 11:19:02 +00:00
d91830b032
Namespace cleanup. Prefix all the JMPBUF* macros with _JB.
1998-08-04 02:01:17 +00:00
5429ccda94
Pass the dma_tag to _bus_dmamap_load_buffer.
1998-08-03 13:09:01 +00:00
70fe6c76a1
Pass ps_strings in r0 when execing processes.
...
Use macros rather than absolute values in zero_page_read*() functions.
1998-08-02 21:50:31 +00:00
005ae749a7
Oops, make a sentence added in previous commit parseable.
1998-08-02 19:42:35 +00:00
bf8f319d0e
Remove some lint.
1998-08-01 21:12:32 +00:00
8eeb95fce4
Implement pci_intr_disestablish().
1998-08-01 20:25:12 +00:00
92fa3a68ad
In sio_intr_disestablish, also make sure that IRQs 0, 1, 8, and 13
...
default to edge-triggered, just like in the setup.
1998-08-01 19:38:29 +00:00
0b60fda7c8
Implement sio_intr_disestablish(), and ensure that an initially-enabled
...
interrupt is never disabled and an initially-level-triggered interrupt
never becomes untyped.
1998-08-01 18:54:21 +00:00
528dab6808
Implement alpha_shared_intr_disestablish(). Simply removes the handler
...
fromthe list, allowing the caller to manipulate the sharing type,
if appropriate.
1998-08-01 18:52:36 +00:00
aec399e36f
Changes to keep lint happy.
...
In particular, fix some Makefiles so the include
paths are passed to lint.
1998-08-01 11:22:51 +00:00
6c727e1651
dvma_malloc(), dvma_mapin() and dvma_mapout() are gone; all drivers
...
the use bus_dma(9) interface now.
1998-07-31 22:35:07 +00:00
359cf8c23d
Move `dvma_cachealign' here from vm_machdep.c
1998-07-31 22:23:30 +00:00
a0818b4b8b
Use bus_dmamem_alloc/bus_dmamem_map.
1998-07-31 22:21:35 +00:00
0869d8f714
Blargh, deal with some fallout from the ISA PnP goo, this will go away once
...
we can pull in files.isa properly.
1998-07-31 16:42:01 +00:00
519f1f7f0e
Convert to bus dma.
1998-07-31 15:53:11 +00:00
22554e01a9
Following discussions with eeh and mrg, change most of these types so
...
that they should make an ILP32 setup with an ILP32 compiler and an LP64
setup if run through an LP64 compiler. None of the data sizes actually
change right now, and any type errors that show up would have to be fixed
eventually anyway.
1998-07-31 15:30:40 +00:00
a24dbc8065
(Always) (practice) (safe) (macro expansion).
1998-07-31 15:07:41 +00:00
c206cad36e
Convert to bus_dma.
1998-07-31 12:45:48 +00:00
46c7e2fa53
ISA PnP goo.
1998-07-31 04:55:30 +00:00
2e33e4c2fa
First-cut support for ISA PnP for NetBSD/bebox.
1998-07-31 04:54:38 +00:00
29ad6dac50
ISA PnP goo.
1998-07-31 04:50:01 +00:00
6f3b1afe37
First-cut ISA PnP support for NetBSD/arm32.
1998-07-31 04:48:42 +00:00
92d42c0871
Add a comment about why we can (and must) use bus_space_{,un}map() directly
...
in this file.
1998-07-31 04:44:10 +00:00
a138b68143
Don't include files.isapnp here.
1998-07-31 04:39:23 +00:00
9589268364
Add unused zskbd and zsms entries, and ISA PnP entry.
1998-07-31 04:38:51 +00:00
e2ce6c8a28
Machine-dependent ISA PnP goo for NetBSD/alpha.
1998-07-31 04:38:04 +00:00
f948e430bb
Provide a hook for bypassing space accounting, needed to support ISA PnP
...
for now.
1998-07-31 04:37:02 +00:00
ecf815f930
Back out previous; it is perfectly reasonable, and desirable, to print out
...
debugging info ifdef DEBUG.
1998-07-31 02:10:12 +00:00
36f9ab27ce
>We're not Linux. If we still want driver version strings to be displayed
...
>at boot, then I suppose DEBUG is a reasonable compromise.
Makes the whole concept useless. This is for default printouts. If you
can build a debug kernel, you know what version you have. This was under
the concept of 'RAS' so that hapless users could tell you microversion
things. But I guess this isn't the right way according to our local
Jesuits. Oh, well. I'll think up something different and hopefully
less objectionable. And yes, NetBSD isn't linux. The developers seem
to be equally bad tempered, but linux is more successful.
1998-07-31 01:56:49 +00:00
af89712b25
Use bus_dma_*() instead of dvma_mapin/dvma_mapout.
1998-07-30 22:42:04 +00:00
32a5557426
Adapt to changes in the base bus_dma* functions.
1998-07-30 22:29:34 +00:00
8a39d7a7fb
The IOMMU now has its own dma bus tag and associated functions.
...
machdep.c retains the `mainbus' (i.e. sun4/sun4c) bus_dma* versions for now.
Create a DVMA map specifically for 24-bit devices (le,ie), which has a
more room than previous DVMA map which should be reserved for sun4 VME.
1998-07-30 22:28:44 +00:00
862c0bafcc
Define a BUS_DMA flag for devices that have a 24-bit address space.
...
Update _bus_dma* prototypes.
1998-07-30 22:20:31 +00:00
7b68dfc9c7
Fixup include paths.
1998-07-30 21:58:48 +00:00
d85ed3d973
Put the SoundBlaster stuff back for files.ofisa (Until we can just
...
properly include files.isa).
1998-07-30 21:51:00 +00:00
741c837f77
Get to DMA map functions through parent tag, instead of calling some base
...
functions directly.
1998-07-30 18:54:06 +00:00
cdeb158d5f
A first stab at making the SHARK sound work. It doesn't really work
...
yet, but it probes and makes a noise when used. Stay tuned!
1998-07-30 14:11:42 +00:00
7712d62ed7
allow ${SIZE} to be set from the environment, also allow using genassym.sh (both for cross compiling).
1998-07-30 13:34:09 +00:00
3a8b550914
Make this a bit more complete. (Triggered by Julian Coleman ;-)
1998-07-30 12:02:41 +00:00
813b2f15cf
allow ELFSIZE to be pre-defined
1998-07-30 00:27:04 +00:00
ab0e92568b
<sparc/dev/sbusvar.h> => <dev/sbus/sbusvar.h>
1998-07-29 18:48:54 +00:00
9104b183fa
Lots of things have moved to <dev/sbus/sbusvar.h>
1998-07-29 18:45:57 +00:00
402a052405
Deal with sbus attach args changes.
1998-07-29 18:44:22 +00:00
9e4d2f9b53
Switch to new sbus attach arguments layout.
1998-07-29 18:42:32 +00:00
58d952ce7d
Deal with sbus attch args changes.
...
Use sbus_destroy_attach_args().
1998-07-29 18:37:23 +00:00
426330f642
We no longer need to get the register sets by ourselves.
1998-07-29 18:36:08 +00:00
718ff722b7
In the reset() function, preserve the current cable selection bit.
...
If in auto media select mode, this avoids losing carrier every time
the lance code decides to re-initialize.
1998-07-29 16:10:57 +00:00
33a72d432a
Add wss on isapnp.
1998-07-29 12:36:47 +00:00
5b03ac980b
Use ite for screen console by default until wscons support.
1998-07-29 05:38:04 +00:00
fbd86622a0
Add ``install floppy'' config file.
1998-07-29 05:19:26 +00:00
eb32016a95
Split up using BWX for PCI config and bus access. Default to using BWX for
...
the former, but not the latter. Hopefully, this will address some problems
people have been experiencing w/ some devices on Pyxis systems when BWX
is used for bus access. (If it's not used for PCI config access, we can
get fatal machine checks while probing behind PCI-PCI bridges!!)
1998-07-29 01:28:44 +00:00
620bc79e36
Fix the copyin(), copyout() argument validation to check for zero
...
length copy before returning EFAULT for a bad address.
1998-07-29 00:56:08 +00:00
1712467308
fic typi
1998-07-29 00:31:01 +00:00
8a2c338704
Use a std options file, like other ports do.
1998-07-29 00:19:20 +00:00
7698349700
Ah, we use a _different_ ofcons; rename it macofcons to avoid the
...
name collision.
1998-07-28 23:43:33 +00:00
c8f1cea511
Provide SSIZE_MAX.
1998-07-28 23:20:54 +00:00
8a3626d966
ofcons attaches to ofbus, not pci! Comment it out, since we do not have
...
any ofbus support in these configurations.
1998-07-28 23:09:07 +00:00
d0714d3f21
Support NFS_BOOT_DHCP.
1998-07-28 23:02:06 +00:00
37b70b3064
Change the "aresid" argument of vn_rdwr() from an int * to a size_t *,
...
to match the new uio_resid type.
1998-07-28 21:39:54 +00:00
6dd25080b4
Garbage-collect ofisacs, noted by Scott Reynolds.
1998-07-28 21:19:13 +00:00
9111209fdf
In _bus_dmamem_map(), use uvm_km_valloc() to get kernel addresses.
...
uvm_map() -- which used to be here (why was that?) -- was called with
an uninitialized value in its `start' argument.
1998-07-28 20:46:28 +00:00
5788941588
document "Intelli"mouse support
1998-07-28 20:22:29 +00:00
fa0aee147e
Use the new mkdtemp() instead of mktemp();mkdir().
...
Various cleanups (and typecasts) to get lint quiet.
Add remaining prototypes, enable -Wmissing-prototypes -Wstrict-prototypes.
1998-07-28 20:10:53 +00:00
3ff8e6493a
Don't cast the null residual pointer passed to vn_rdwr().
1998-07-28 18:34:52 +00:00
e8063e5201
Don't cast the null residual pointer passed to vn_rdwr().
1998-07-28 18:30:54 +00:00
cc0d537633
GC.
1998-07-28 14:04:08 +00:00
5ed2ac8a95
Apparently we need to specify both slot and offset for all SBUS devices.
...
This is really annoying....
1998-07-28 04:48:04 +00:00
fbb376b4ee
Fixup problems caused by sys/dev/sbus addition.
1998-07-28 04:46:48 +00:00
1053f23abf
That last change to reduce warnings wasn't quite right.
1998-07-28 04:44:52 +00:00
fb7bb1a359
Remove mbppio.h from the list.
...
Also stop installing db_machdep.h, fbvar.h, z8530.h.
1998-07-28 00:34:56 +00:00
aaadc9459d
This file is now in <dev/sbus>
1998-07-28 00:33:35 +00:00
14f4493376
Magma driver has been moved to <dev/sbus>.
1998-07-28 00:19:22 +00:00
fd9017990f
Magma driver has been moved to <dev/sbus>
1998-07-28 00:17:47 +00:00
b0f82d5c73
`le' and `en' now attach to sbus (and lebuffer) in <dev/sbus>
...
Other `le' front-ends split into separate files.
1998-07-28 00:10:23 +00:00
4ca3b5c079
We no longer use these.
1998-07-28 00:06:23 +00:00
3d9b1710a7
This file is now in dev/sbus.
1998-07-28 00:05:41 +00:00
c7a2e942b0
Split the `le' driver front-ends into separate files.
...
The sbus and lebuffer front-end have moved to dev/sbus.
1998-07-27 23:59:11 +00:00
f150e8645e
NORVEGIAN -> NORWEGIAN
1998-07-27 23:55:23 +00:00
c4fae2a286
NORVEGIAN -> NORWEGIAN
1998-07-27 23:52:49 +00:00
eec66e52bd
Get headers from <dev/sbus>
1998-07-27 22:34:48 +00:00
d1f03e068a
<sparc/dev/sbusvar.h> => <dev/sbus/sbusvar.h>
1998-07-27 19:32:42 +00:00
2e6ea67528
Use <dev/sbus/files.sbus>
1998-07-27 19:20:32 +00:00
6cd4c4ea99
Use <dev/sbus/files.sbus>.
1998-07-27 19:20:03 +00:00
db822a6c0a
These files are now in <dev/sbus>.
1998-07-27 19:17:50 +00:00
e92f09b2b7
SBU_BURST_* are now in <dev/sbus/sbusvar.h>
1998-07-27 19:16:49 +00:00
c720383eb3
Nuke USB mouse device.
1998-07-27 18:50:42 +00:00
7c050065fd
Correct indent.
1998-07-27 18:42:27 +00:00
11245c76f7
Ops, forgot FINNISH_KBD.
1998-07-27 18:38:07 +00:00
88a83f13de
Back out previous.
1998-07-27 18:27:08 +00:00
6ebd8cf4e3
Comment out cs device. Kernels don't compile because there is no
...
cfattach structure found. Leave it to the author to untangle.
1998-07-27 18:02:02 +00:00
da2e61d160
Delint.
1998-07-27 13:55:32 +00:00
82370f62b3
Document FRENCH_KBD,GERMAN_KBD,NORVEGIAN_KBD options.
1998-07-27 13:39:51 +00:00
db03bbe99b
this has moved (and was never used here anyway)
1998-07-27 06:09:02 +00:00
f0065b1a61
don't provide a static splx prototype if SPLDEBUG. avoids warnings...
1998-07-27 06:05:55 +00:00
b8b9e0bd1e
move to sys/dev/sbus for lebuffer driver (old path never existed anyway)
1998-07-27 05:52:21 +00:00
36ee8a045b
use lebuffer.c from dev/sbus.
1998-07-27 05:49:02 +00:00
c5e180526b
these have moved to sys/dev/sbus.
1998-07-27 05:48:42 +00:00
06d5ffd2a8
enable kernfs and mfs.
1998-07-27 05:45:17 +00:00
b0b64545e8
Add cs* at isa? port 0x300, wildcard IRQ and memory address, to pull
...
them from the EEPROM. Wildcard DRQ to force memory-mode operation; this
value is not available in the EEPROM and must be configured manually.
1998-07-27 01:57:56 +00:00
fca2dc28ac
Add cs0 at isa? port 0x300, wildcard IRQ and memory address, to pull
...
them from the EEPROM. Wildcard DRQ to force memory-mode operation; this
value is not available in the EEPROM and must be configured manually.
1998-07-27 01:51:29 +00:00
9b35e91d59
Update for cs* at ofisa?
1998-07-27 01:44:20 +00:00
803df07221
Obsolete.
1998-07-27 01:43:24 +00:00
mark