183442fe73
Emulate ulinear_be using slinear_be on later chips.
1998-08-14 00:49:23 +00:00
f750a7d47e
device ess was listed twice
1998-08-13 04:53:18 +00:00
a2dd74ed79
Merge paddr_t changes into the main branch.
1998-08-13 02:10:37 +00:00
58e0098fef
Shut up after close().
1998-08-12 21:36:21 +00:00
5c76b6a944
The mic preamp is really a property of the input stage, and affects both
...
pass-through and recording.
1998-08-12 19:13:14 +00:00
b170caf730
Completely rewrite media selection. Add support for the MII/PHY on
...
the 3Com 3c905-TX and 3c905-T4. Fix handling of the MII on the
3c595-MII and 3c597-MII (can't talk to the PHYs on these cards; just
use "manual" for the external MII port).
Fixes kern/4782 (Chris Demetriou).
1998-08-12 18:51:52 +00:00
fa39959a5e
Add a MIDI driver for the PC speaker. This is mostly of hack value,
...
but, hey, lotsa people got a MIDI device now! (A truly pitiful one. :-)
1998-08-12 18:16:36 +00:00
881b4053a6
Remove some white space.
1998-08-12 18:15:04 +00:00
3979b06d00
enhanced -> preamp
1998-08-12 03:18:34 +00:00
1f5c14d8ef
ess_audio_channel:active is now used even when DIAGNOSTICS is not defined.
1998-08-11 12:16:22 +00:00
a6e73a5576
Actually set all the logical filter bits. Doh!
1998-08-11 05:57:40 +00:00
271d3df6f3
Fix an obvious bug that caused the multicast filter to always be all 0s.
1998-08-11 04:18:25 +00:00
8ba8e2056b
Remove unused field (sc_ih) in ess_softc (interrupt handlers are kept
...
in a per-direction structure).
1998-08-10 20:24:26 +00:00
b034eb97bf
Fix typo.
1998-08-10 20:02:48 +00:00
7fca135b1b
Use the new trigger interface.
1998-08-10 15:32:18 +00:00
060f81eb62
Minor change.
1998-08-10 02:19:18 +00:00
93703857ca
Slow down, Wilbur.
1998-08-10 02:13:44 +00:00
7514d511f7
Fix a typo I introduced in the MIDI code.
1998-08-10 02:12:30 +00:00
8d77cae1b4
For models prior to the SB16, there is only one clock divider, so couple the
...
sample rates. However, only do this if both play and record are being used
simultaneously; otherwise we can't play 22KHz on the SB1.
1998-08-10 01:25:33 +00:00
3dcff6581b
Use the new trigger_{in,out}put interface.
...
Also, even on the SB1, we can leave the DMA controller in auto-initalize
mode and just send a command to the board for each block. This may help
prevent FIFO underruns.
1998-08-10 00:20:39 +00:00
b4e0bf5dfb
Use 4- and 8-byte DMA transfers.
1998-08-09 06:52:57 +00:00
0611fc34f8
Don't actually touch the hardware in set_params; defer that until we actually
...
start a transfer. Instead, just check that the parameters are valid.
Also, use 16-bit output for u-law and a-law.
1998-08-09 06:38:30 +00:00
5eba82397c
Oops; fix typo.
1998-08-09 04:59:55 +00:00
017b9af5fe
Clarify with a specific reference to the manual page in question.
1998-08-09 04:58:08 +00:00
12f5a41e1f
Make the previous slightly more robust, and set AUDIO_PROP_INDEPENDENT.
1998-08-09 04:40:55 +00:00
c8532af3b2
Make sure the sample rate is the same on both channels, tracking the change
...
from one channel to the other if only one is active.
1998-08-09 04:14:47 +00:00
759ca5ee0c
The manual says to use the other crystal for 22050Hz.
1998-08-09 03:48:42 +00:00
565adbaffb
Set the FIFO control bits correctly so that stereo recording works.
1998-08-09 02:54:50 +00:00
80457a2c65
Use auto-initialize DMA for recording.
1998-08-09 02:05:52 +00:00
e2686d0a1b
Use splnet, not splimp.
1998-08-08 23:51:39 +00:00
c49235f44c
Use splnet(), not splimp().
1998-08-08 23:44:12 +00:00
254afcaecb
Sleeping forever kinda sucks.
1998-08-08 21:37:00 +00:00
17932f0575
Set the correct modes for the record channel.
1998-08-08 20:55:36 +00:00
558733ffc6
Track our carrier status and report it in the media status callback.
1998-08-07 05:55:14 +00:00
7b044dea51
Make the irq checking logic somewhat less bogus.
1998-08-07 00:51:06 +00:00
48bae9ee88
Add MIDI support. The MIDI devices can be accessed as ``raw'' through
...
the /dev/rmidiN devices, or with a sequencer interface via /dev/music.
So far the only supported MIDI device is the MPU401 port on SoundBlaster
(and only on SB on isapnp, since we do not have locators with multiple
values yet).
1998-08-07 00:00:55 +00:00
0c6791d804
Add macro to test iobase validity.
1998-08-05 16:40:22 +00:00
f76fb48283
Use looping DMA for play channel.
...
More cleanup.
1998-08-04 13:14:42 +00:00
ce69d417a2
Make it compile without DIAGNOSTIC
1998-07-31 23:54:09 +00:00
6b407a79c6
Major cleanup of the ESS driver. It now sorta works. More to come.
1998-07-31 15:17:17 +00:00
75db93cec2
Pull in files.isapnp here; the two busses are linked together quite closely
...
(more than we'd like maybe, but don't we wish ISA didn't suck...)
1998-07-31 04:40:39 +00:00
11c3d96b49
Flush spurious #endif after ADDMULTI
1998-07-31 01:10:13 +00:00
bf52ef5697
Squash unused variable.
1998-07-30 22:17:34 +00:00
ae2fb64e3a
Document supported boards near the top of the driver source code.
1998-07-30 21:28:15 +00:00
b7a585b61d
Use the previously committed pnp hook.
1998-07-30 18:03:34 +00:00
8bd9c69e11
Multicast support.
1998-07-30 16:40:19 +00:00
cdeb158d5f
A first stab at making the SHARK sound work. It doesn't really work
...
yet, but it probes and makes a noise when used. Stay tuned!
1998-07-30 14:11:42 +00:00
d6a8a4f025
Don't print chip name in attach, the ad1848 attach already does.
1998-07-29 11:39:25 +00:00
20f454ae1c
KNFify.
1998-07-28 20:58:39 +00:00
a374ab61d8
ic/i82595reg.h
1998-07-28 16:02:34 +00:00
4fb93c48ec
Remove dead code.
1998-07-28 14:44:46 +00:00
daed8d7ce1
Fix obsolete code in waiting for calibration on the ad1848.
...
(Sigh, the ad1848 driver should be rewritten.)
1998-07-28 12:13:34 +00:00
e3eed5f706
Fix cfattach naming botch.
1998-07-27 18:27:36 +00:00
0f7ec45c46
Add CS8900 Ethernet driver, and ISA front-end.
1998-07-27 01:22:41 +00:00
e9128957a6
ISA front-end for CS8900 driver.
1998-07-27 01:20:43 +00:00
f68dfbe928
Sigh, make this work with the i386 bus_space functions (which have debugging
...
glue in them, and thus subtle syntax quirks).
1998-07-27 01:20:19 +00:00
2d588abad8
Split up the Shark CS8900 driver into front-ends and core back-end (which
...
is here, since the chip can only live on an ISA bus; only the autoconfig
glue is different).
1998-07-27 01:08:51 +00:00
930937fd49
Define the CS8900 memory size, and macros to test for valid memory
...
base and IRQ.
1998-07-25 00:41:47 +00:00
658e297dd6
Initialize the new "dispoffset" (but don't use it for anything fancy).
1998-07-24 16:22:51 +00:00
8ba3494f9a
Deal with new pool code's changed API by rewriting this to not use pools.
...
Instead, use a manually maintained freelist in a second tailq.
Uses less data space, looks more symmetrical.
1998-07-24 03:29:29 +00:00
8d611b5f32
Remember the product ID and revision.
1998-07-23 19:25:52 +00:00
d2bc077edb
G/c a now unsed config flag.
1998-07-23 19:03:11 +00:00
c4c3297772
update comment ("John F. Woods" <jfw@funhouse.com>, PR kern/5798)
1998-07-23 16:39:24 +00:00
02ad0b4eda
Add support for ifmedia.
1998-07-21 22:58:31 +00:00
d3882c1b56
Define autonegotiation bits.
1998-07-21 22:27:33 +00:00
3db796d287
Define a couple more of the PacketPage registers.
1998-07-21 22:04:13 +00:00
88a0132aec
Correct the name of the CS8920M id, and fix some whitespace lossage.
1998-07-21 19:54:19 +00:00
49bb9d8214
adapt to LANCE driver split
1998-07-21 17:36:01 +00:00
3780fa036e
Add RCS IDs.
1998-07-21 07:48:36 +00:00
0611893e60
Move the cs8900 driver's softc, etc. definitions to an MI location.
1998-07-21 01:04:01 +00:00
0987caaee6
G/c unused definition.
1998-07-21 00:39:21 +00:00
a083bc2950
Split the CS8900 register description from the SHARK-specific header file,
...
and place it here.
1998-07-21 00:07:33 +00:00
3158aca613
Fix the name of the ulinear_be mode.
1998-07-09 02:26:55 +00:00
1b5fbe0b89
DRQ 4 is used to chain the two 8237s together. Make sure it's always
...
cascaded and that it will be unmasked when DMA is thawed after being
frozen. (This also has the effect of making sure that no device ever
erroneously gets DRQ 4.)
1998-07-08 05:23:23 +00:00
011f2bda08
defopt NS, NSIP.
1998-07-05 06:49:00 +00:00
3751946b97
defopt INET, NETATALK.
1998-07-05 00:51:04 +00:00
466e784ee1
defopt DDB.
1998-07-04 22:18:13 +00:00
b4d0730191
Cosmetic change.
1998-07-02 14:39:51 +00:00
85cca39e28
Add a monitor mute.
1998-06-30 16:54:52 +00:00
792ea056b9
Nuke unused variable.
1998-06-30 08:27:39 +00:00
fae3bf0887
Add a monitor mute. The mixer here really needs more work for the
...
Crystal chips.
1998-06-30 08:24:56 +00:00
3858cce05c
Recognize the CS4236B (although we don't yet use any of the extensions).
1998-06-30 07:45:22 +00:00
ad9b5bf5f0
Interrupt share type is EDGE.
1998-06-29 22:42:09 +00:00
3be1ffe6a0
When hooking up the interrupt handler, use an interrupt share type
...
specified by the front-end.
1998-06-29 22:40:56 +00:00
080dc567e8
A first stab at an ESS1887 driver. The code is from the SHARK port
...
and needs a lot of polishing. The code compiles (on i386), but is
untested. See ess.c for a TODO list.
1998-06-29 20:56:21 +00:00
ad3073beaf
Add an additional ISA DMA mode: LOOPDEMAND. This is for devices, such
...
as the Shark's CS8900 Ethernet, which want to use the DMA controller in
this mode (as opposed to single mode).
[Editor's note: committed from a Shark using a new bus_dma back-end
and a CS8900 driver converted to use the MI code :-]
1998-06-28 06:59:35 +00:00
91d0d98450
adapt to wsdisplay interface change
1998-06-26 21:07:03 +00:00
e997d4ac60
When writing packets to transmit buffers, do unaligned buffer fixups,
...
more-or-less lifted from the Shark CS8900 driver.
1998-06-25 19:21:03 +00:00
ab5b45577b
Don't panic if a DRQ is already allocated. Instead, just return EAGAIN
...
to indicate that the resource is unavailable.
1998-06-25 19:18:05 +00:00
0e1a83adc3
* Add defopt MCD_PROMISC for more conservative probes.
...
Before, the probe routine (mcd_find() would succeed even if the probe
code thought it had a response, but didn't recognize the ID-code byte.
Now, only do the promiscuous match if MCD_PROMISC is configured.
1998-06-23 03:26:18 +00:00
41af9f2ec7
Make PAS driver work again. From "John F. Woods" <jfw@jfwhome.funhouse.com>.
1998-06-22 17:21:34 +00:00
6c7fabb232
adapt to wscons interface change
1998-06-21 09:51:59 +00:00
1f8eca312d
Remove a bunch of totally unnecessary #include <machine/pio.h>
...
left over from the olden days.
1998-06-17 08:17:25 +00:00
651b44e211
Rework the way kernel include files are installed. In the new method,
...
as with user-land programs, include files are installed by each directory
in the tree that has includes to install. (This allows more flexibility
as to what gets installed, makes 'partial installs' easier, and gives us
more options as to which machines' includes get installed at any given
time.) The old SYS_INCLUDES={symlinks,copies} behaviours are _both_
still supported, though at least one bug in the 'symlinks' case is
fixed by this change. Include files can't be build before installation,
so directories that have includes as targets (e.g. dev/pci) have to move
those targets into a different Makefile.
1998-06-12 23:22:30 +00:00
08f2cdd7c4
clean up vga_isa_match() - always return "2" on success to make the
...
driver win over "pcdisplay"
1998-06-12 18:45:48 +00:00
d30382ffb4
Don't call isa_dmainit() when NISADMA == 0.
1998-06-11 08:29:33 +00:00
5bc2217a49
Nuke __BROKEN_INDIRECT_CONFIG.
1998-06-09 07:24:55 +00:00
680a3d77f4
Add isa_dma{freeze,thaw}(), used to temporarily stop and then restart
...
all ISA DMA. Needed by e.g. the SmartCard reader for Sharks.
1998-06-09 01:04:17 +00:00
5f97398507
Adjust for changes to the ISA DMA API.
1998-06-09 00:05:44 +00:00
ff76b8e96b
Change the ISA DMA API to take an isa_chipset_tag_t rather than
...
a struct device * corresponding to the ISA bus device. The ISA DMA
controller driver functions have been renamed and now take a struct
isa_dma_state *, and are called indirectly by machine-dependent code
which provides the DMA state.
These changes allow e.g. `ofisa' (the OpenFirmware configuration
mechanism for the ISA bus, used by e.g. Sharks) to use the MI ISA
DMA controller code.
1998-06-09 00:00:21 +00:00
914f235803
Fix the obvious bogons reported in PR#5552.
...
The problem in the memory size probe is still pending.
1998-06-08 12:19:46 +00:00
2b00a47b9e
Add ISAPnP attachment for PCMCIA bus controller; reorganize ISA
...
attachment to let it share code with PnP attachment.
1998-06-07 18:28:31 +00:00
68e0540ee9
Add an Aria sound driver.
...
From "R. C. Dowdeswell" <elric@imrryr.org>.
1998-06-06 10:12:34 +00:00
196bb746eb
Add a graphics device driver for wscons which supports legacy PC display
...
adapters. (minimal functionality - no virtual screens, no colors)
1998-05-28 16:51:50 +00:00
b84dbbb37c
Put definitions and subroutines needed for all PC display adapters
...
(MGA/GCA and compatibles) into global headers / source files.
Let the VGA driver use them.
1998-05-28 16:48:40 +00:00
7b4e205670
Use stream methods (when available) to read/write the card memory.
1998-05-25 10:36:51 +00:00
18319c0048
Changes so that these compile on NetBSD/alpha as well as NetBSD/i386.
1998-05-23 18:32:29 +00:00
aa04459121
KNF.
1998-05-21 19:17:50 +00:00
0b9ec50365
Add a newline.
...
KNF.
1998-05-21 19:09:28 +00:00
74545baf39
Add a Yamaha OPL3-SA3 driver and clean up all AD1848 drivers.
...
Submitted by Constantine Sapuntzakis <csapuntz@reeducation-labor.lcs.mit.edu>
and originally written for OpenBSD.
1998-05-20 16:19:41 +00:00
da5b8105bd
Remove BROKEN_INDIRECT_CONFIG relicts.
1998-05-05 21:41:18 +00:00
85c0eea04e
Suppress the diagnostic printout if the keyboard controller has no
...
mouse port.
1998-05-03 12:04:53 +00:00
ed1653232b
If the keyboard is console device, use the command byte as set by
...
the console initialization code.
1998-05-03 11:54:38 +00:00
e47f63efe6
Make some diagnostic output "#ifdef PCKBCDEBUG".
1998-05-03 10:02:11 +00:00
28454023cc
Add a comment about some future work.
1998-04-28 19:13:24 +00:00
d58832579d
Fix botched DMA tag initialization.
1998-04-18 10:26:56 +00:00
a099e8dda5
Initialize the command byte and its shadow register in early console
...
setup so that the keykoard driver can deal with scancode translation
in its console initialization function.
1998-04-18 09:42:20 +00:00
30654f3e89
Split out from if_le_isa.c - this card is quite different.
...
The driver is known not to work (timeout on send attempts).
1998-04-16 18:00:14 +00:00
02157092d4
Make the ISA LANCE drivers work without BROKEN_INDIRECT_CONFIG.
...
DEPCA is now split out into a separate driver.
Because there can be only one attachment of a device to a bus, for
each card type a separate pseudo-bus was introduced which attaches to "isa"
and where "le" attaches to.
1998-04-16 17:51:46 +00:00
0c199c88be
add MI ISA VGA and the speaker driver
1998-04-15 20:26:53 +00:00
2c823077d7
MI driver for the ISA speaker, and the IBM BASIC playstring interpreter
...
which has so many fans.
1998-04-15 20:26:18 +00:00
334ef5a59c
Fixup RCS IDs.
1998-04-15 01:45:43 +00:00
8c1b46c2f5
Remove the `delay port' stuff since nothing uses it anymore (can't reliably
...
use it on modern chipsets).
1998-04-15 01:44:23 +00:00
2eea6bd8a4
We can't trust the "delay port" anymore - it doesn't work as expected on
...
newer chipsets. Use delay() instead.
Being here, remove BROKEN_INDIRECT_CONFIG.
1998-04-07 16:23:19 +00:00
11da32b13c
Clean up diagnostic printouts.
...
Being here, remove BROKEN_INDIRECT_CONFIG.
1998-04-07 15:57:48 +00:00
848e8406bc
The fe driver is spilt into ate, fmv and mbe, and this file is no longer
...
necessary.
1998-04-03 04:46:46 +00:00
910e6420e0
Delete entry for fe*.
1998-04-03 04:44:39 +00:00
5d8b98c7b1
Use a 4-bit table to speed up the CRC even further, without increasing the
...
code size too much.
1998-03-29 23:02:27 +00:00
dbef68a11b
Update for __BROKEN_INDIRECT_CONFIG. Still untested since it is so hard
...
to find testers for these old cards.
1998-03-23 01:00:21 +00:00
3c346a45ca
The keyboard controller's address range is 5 bytes long - reflect this
...
here.
1998-03-22 15:44:02 +00:00
b5ec34f082
MI driver for the infamous PC keyboard controller, primarily for use with
...
the new wscons code (but may be interfaced with other drivers as well).
needs testing
1998-03-22 15:25:15 +00:00
065733619a
ISA frontend for sys/dev/ic/vga.c
1998-03-22 15:14:35 +00:00
52c701add6
Make this file compile without BROKRN_INDIRECT_CONFIG.
...
(Brute force - device probe always returns 0. Should be fixed soon.)
1998-03-22 12:50:20 +00:00
5aaf839bc3
Make this file compile without BROKRN_INDIRECT_CONFIG.
...
(Brute force - device probe always returns 0. The driver is replaced
by if_ate, if_fmc and if_mbe and is here for reference only.)
1998-03-22 12:48:41 +00:00
e26f2ce65b
Define new device `ate' and `fmv'.
1998-03-22 04:38:42 +00:00
2b5f7351d2
Split Fujitsu MB9696x based ethernet card driver into bus
...
dependent/independent code and bus.h'fied.
1998-03-22 04:25:36 +00:00
85687409e1
don't forget to set dma_arg, when using DMA functions. also, minor
...
spacing bogon cleanup. Pointed out by Kazuki Sakamoto in PR 5157.
1998-03-13 16:50:07 +00:00
09f43c63cf
Update probing for GUS a little. From soren@t.dk,
...
closes PR kern/5148.
1998-03-12 12:28:50 +00:00
d644f9b973
Apply cs4236 fix from rh@vip.at. Closes PR 5143.
1998-03-11 09:26:05 +00:00
a57a8d66ff
let panic() call DDB, don't do it ourselves; from Nathan Williams in PR 5131
1998-03-09 06:32:51 +00:00
775d60ecd7
Use lower case "agc" for consistency.
1998-03-04 19:38:28 +00:00
5ac38e9b53
Re-arrange several functions so we no longer need __BROKEN_INDIRECT_CONFIG
...
semantics.
1998-03-03 20:51:20 +00:00
5513bc639f
Cheesily work-around reliance on __BROKEN_INDIRECT_CONFIG; should we
...
bother trying to find the board's memory size in the match routine at all?
1998-03-03 20:50:06 +00:00
d8bb682673
drop `ef_softc' from ef_match function.
1998-03-02 23:12:18 +00:00
1fe6513796
Remove extraneous `$Id$' lines.
1998-02-28 20:43:28 +00:00
c0e247427a
This driver is replaced by three i82586 front-end drivers: `ix', `ef' and `ai'.
1998-02-28 20:42:43 +00:00
9698950530
* Remove `_NEW_I82586'.
...
* KNF.
* erase ghost spaces and tabs.
1998-02-28 01:14:15 +00:00
a3a9cbc8c5
Replace the `ie' driver by three separate front-ends: `ix', `ef' and `ai'.
1998-02-27 23:54:16 +00:00
22a8b1ae89
AT&T/StarLan i82586 front-end driver from Rafal Boni.
1998-02-27 23:52:34 +00:00
82153cc305
3Com/3C507 i82586 front-end driver from Rafal Boni.
1998-02-27 23:51:52 +00:00
9bb4839afd
EtherExpress/16 i82586 front-end driver from Rafal Boni.
1998-02-27 23:50:51 +00:00
ccfe537e97
don't include <machine/pio.h>. It's unneeded here now (this code
...
uses the bus_space_* interfaces), and therefore unwanted.
1998-02-24 02:12:09 +00:00
49c1580874
-make compile without BROKEN_INDIRECT_CONFIG
...
-don't include <machine/pio.h>
1998-02-23 14:12:18 +00:00
a7f7004e33
include an MD header if arm32. (No header yet, but there will be
...
one eventually.)
1998-02-17 18:27:10 +00:00
4399060ec9
- Perform all necessary bus_dmamap_sync() operations.
...
- Greatly simplify allocation and DMA mapping of the mailbox and ccbs.
- Be more robust against resource shortage errors, and report errors better.
1998-02-17 03:02:30 +00:00
8354e68508
Remove "class" declarations, and add "devclass" declarations where
...
appropriate. Fix several inconsistencies between device class and
attributes. Mostly from Chris Demetriou.
1998-02-16 22:12:45 +00:00
8abe76d2f0
Add offset and length parameters to bus_dmamap_sync(), used for specifiying
...
partial syncs of a DMA mapping.
1998-02-04 05:12:46 +00:00
a7c5c1ef3c
Add dm_mapsize to bus_dmamap_t and rename BUS_DMAMEM_NOSYNC to
...
BUS_DMA_COHERENT.
1998-02-04 00:32:55 +00:00
77b3a5be15
Put a debugging printf inside #ifdef IYDEBUG ... #endif.
1998-02-03 16:22:01 +00:00
1caaa1f520
PR/4883: Andreas Wrede: Check for wildcard mem address not io ports.
1998-01-31 11:23:35 +00:00
d411251c64
Fix for the vibra16x from Lennart Augusts: saying that the dsp4.16 was
...
a SB64 was just a guess. The vibra16x is really a sb16.
1998-01-30 11:55:36 +00:00
6f6593a533
Fix initialization and timing problem.
...
As per misc/4902, from Clifford Wright <cliff@snipe444.org>.
1998-01-30 02:02:38 +00:00
2538ed1062
Use offsetof() from libkern.h
1998-01-28 02:23:04 +00:00
6f8773dd64
I'm not responsible for this address window splitting hack, but I fix it
...
anyway.
1998-01-27 19:14:18 +00:00
243c218061
Update copyright.
1998-01-26 20:30:06 +00:00
044add4253
If we're using these devices on a big-endian CPU, byte swap the "count"
...
field in the dp8390's packet header (because the dp8390 runs in little-endian
mode in these cases). Inspired by an e-mail from Kazuki Sakamoto.
1998-01-26 19:21:36 +00:00
e8cf0c444c
Make sure we create DMA maps if the CD4231 probe fails.
1998-01-25 23:48:06 +00:00
4ed268e9ac
Print a newline in wdc_isa_attach().
1998-01-23 01:04:54 +00:00
33c197e736
Half the include files are unnecessary.
1998-01-22 23:42:39 +00:00
a014b499f1
add definitions for the mask registers. fix I/O size definitions.
1998-01-22 00:57:10 +00:00
f874e95e8a
make compile without BROKEN_INDIRECT_CONFIG,
...
fix obvious brokeness in port offset calculation
(untested)
1998-01-20 13:08:33 +00:00
59d2219410
Split out the ISA part of the WSS driver to allow PnP attachment.
...
Make the AD1848 driver a little more readable with some macros.
1998-01-19 22:18:23 +00:00
9d3aef5632
Put each of two labels one line to early. That could cause a panic,
...
if the wdc space couldn't be mapped. Pointed out by fvdl@netbsd.org .
1998-01-17 00:40:45 +00:00
aa872229e1
fix typo in comment that i just added
1998-01-15 00:35:38 +00:00
aaede4d8d8
Various cleanups and bug fixes to the wdc/wd code:
...
* Fix bug in wdc that would overflow ATAPI transfer length.
* Improve wdc probe code so that 'wdc' is probed in if present
even if there are no drives attached, and so that it works
properly even if the only device is an ATAPI slave.
* bus_space-ify.
* split the ISA attachment from the wdc driver, and remove
ISA dependencies from non-ISA files.
* claim that wd and wdc are now machine-independent (probably not
completely true, but mostly so; they at least work on arm32 and
i386).
* Various other minor fixups and cleanups, some of which were pointed
out by Kazuki Sakamoto.
1998-01-14 23:41:59 +00:00
ad141a69a7
Shuffle wd/wdc driver files around (via repository copies). wdc
...
now lives in dev/ic, wd now lives in dev/ata. there's now a 'ata'
interface attribute defined in conf/files, but wdc can't go there
yet because some ports still use private versions based on the old
ISA version.
1998-01-14 23:36:30 +00:00
6dbf9b31d3
"device" structure is not used in probe anymore
1998-01-14 12:17:14 +00:00
4429cca488
make it compile without BROKEN_INDIRECT_CONFIG
1998-01-14 12:14:41 +00:00
13463145fe
make it compile without BROKEN_INDIRECT_CONFIG
1998-01-13 19:33:28 +00:00
ebb84c5792
Fix a typo in previous.
1998-01-13 06:13:29 +00:00
99a9d7a632
Don't include <machine/pio.h>. Include <machine/bus.h> explicitly.
1998-01-13 03:34:32 +00:00
72852bbaec
make it compile without BROKEN_INDIRECT_CONFIG
1998-01-12 20:48:17 +00:00
06ce220790
Update for config changes.
1998-01-12 09:39:57 +00:00
925ce7706e
ast, boca, and rtfps are not ttys, but rather "busses". Similarly,
...
the lpt doesn't export a tty-like interface, so it's dull, too.
1998-01-12 09:29:37 +00:00
c0d8293951
fix some typos in error messages & comments
1998-01-07 08:47:54 +00:00
fff05a68ab
RCSID Police.
1998-01-05 07:31:05 +00:00
ffb3eaa5ea
Add extra delay after wdcreset() call in wdcprobe. Needed by at least
...
one controller, where registers otherwise will still be inaccesible
(even though the busy bit has been reset), making the probe fail.
1997-12-24 02:01:00 +00:00
187df9b86e
Set the gain to 1/2 by default; 3/4 is too loud and can damage headphones and
...
speakers.
1997-12-02 13:17:39 +00:00
2f8f801256
The iy driver now uses if_media (it was the last one, at last for i386, to use
...
the historical link? flags for media select)
XXX No pullup request for this. But if sysinst supports explicit media
XXX selection in 1.3, this should be in 1.3 as well.
1997-12-02 09:34:03 +00:00
4e3168d176
Make this work again. KNF.
1997-11-30 20:03:15 +00:00
123570c713
fix inconsistent declaration in non-"__BROKEN_INDIRECT_CONFIG" case
1997-11-30 15:32:25 +00:00
805c7b6bc0
make it compile without "__BROKEN_INDIRECT_CONFIG"
1997-11-30 15:31:23 +00:00
4da2344b18
fix inconsistent declaration in non-"__BROKEN_INDIRECT_CONFIG" case
1997-11-30 15:24:59 +00:00
c7e3c24d53
make it compile without "__BROKEN_INDIRECT_CONFIG"
1997-11-30 15:18:58 +00:00
ff936c230e
Move the we driver at the begining of ethernet board, other board's probe
...
clobbers my SMC. Now I can really use a generic kernel with my SMC @0x300.
This change has been tested on various machines with ne2000 and 3c509 baords.
XXX All these probes sould be reordered after the release, with invasive
XXX probes at the end.
1997-11-21 13:25:14 +00:00
2f9552c068
Bussify the I/O part of this driver, so that the invasive probe will
...
not clobbers config of already-found boards.
1997-11-21 10:27:45 +00:00
66f0746d98
The if_ie probe is invasive in such a way that it can clobber other's board
...
config. Now that this driver is bussified, move it last in the ethernet
adapter list.
1997-11-21 10:09:42 +00:00
639dc38fd4
Rewrite lc_isa_probe() to not scan i/o space for LEMAC cards, but rather
...
to look specifically at the address it was provided *only*, since the
scan isn't safe (it can stomp on cards that will be probed later, like
NE2000 clones).
1997-11-17 03:34:24 +00:00
dd95190002
XXX Workaround for ViBRA cards with two 8 bit DMA channels.
1997-11-12 20:28:42 +00:00
db0d6c4018
Add missing ;
1997-11-11 22:43:51 +00:00
ec43979ba3
Properly determine the default media on '790-based cards.
1997-11-08 06:13:53 +00:00
140159fa85
Add the missing attribute `dp8390nic' for the device `we'.
1997-11-07 13:08:23 +00:00
f7c6e141e6
Various bug fixes for atapi part:
...
- clean up debug code
- Don't check ATAPI signature when probing ATA drives, ATAPI devices were
detected before
- Reset controller after disks probes. The probe, with some combinations of
ATA/ATAPI device keep it in a mostly working, but strange state (with busy
led on)
- The WDCF_IRQ_WAIT flag is now cleared by wdc_ata_intr and wdc_atapi_intr
when appropriate (helps recover from failure conditions)
- In wdcunwedge, send ATAPI_SOFT_RESET to non-ata drives
(helps recover from failure conditions)
- in wdctimeout be a bit more verbose when we missed an interrupt
- Always Increment xfer->c_skip where it should be
- Set the ITSDONE flag when a polled command completed.
1997-11-05 22:19:07 +00:00
8fc6835062
The bus width probe doesn't always work properly, producing a false positive
...
for 12-bit addresses. This causes PCMCIA cards mapped at 0x400 and higher
to not function properly. However, the range 0x300-0x3ff causes some
laptops (e.g. the NEC Versa 6030X) to hang if cards are mapped there.
So, after some experimentation, we compromise. If the probe discovers
a 12-bit address bus, don't trust it. Instead, use the range 0x330-0x3ff.
This has been shown to work on the laptops that the 0x300-0x3ff range is
known to fail on.
1997-11-05 21:41:36 +00:00
6568739901
Add an ISA front-end to the SMC91cxx Ethernet driver ("sm"). This
...
supports generic SMC91cxx-based ISA cards and the built-in SMC
Ethernet found in some laptop docking stations.
Thanks much to Andrew Gillham <gillhaa@ghost.whirlpool.com> for
making this work!
1997-11-05 06:06:07 +00:00
03a0c2d900
Implement a simple queueing mechanism that makes these drivers much
...
more robust in resource shortage situations, basically identical to
code I added to the "ahc" driver some time ago.
Thanks to Brad Spencer for the testing help.
1997-11-04 05:58:22 +00:00
d64e10645f
Add "we" driver, remove "ed" driver.
1997-11-03 21:29:19 +00:00
ae4498b7bf
This driver is now obsolete.
1997-11-03 21:28:49 +00:00
60c2342028
Add a front-end to the MI dp8390 driver for the Western Digital/SMC 80x3
...
family, SMC Elite Ultra family, and SMC EtherEZ family of Ethernet cards.
This front-end completes the split of the ISA "ed" driver.
1997-11-03 21:22:50 +00:00
892b0c409e
Fix a slight brain lapse.
1997-11-02 05:17:32 +00:00
2497f4a8da
Garbage-collect the 3Com 3c503 support from the "ed" driver. The ISA "ec"
...
driver now handles the 3c503.
1997-11-02 00:57:24 +00:00
a945a24322
Front-end to the dp8390 chip driver for the 3Com 3c503 Ethernet interface.
...
Supports changing media with ifconfig's "media" directive.
This splits the 3c503 functionality out of the ISA "ed" driver, much the
same way NE2000 support was split out.
1997-11-02 00:44:25 +00:00
5322570d8a
- Move all of the configurable parameters (alloc_iobase, alloc_iosize,
...
intr_alloc_mask) into one place, comment them, and defopt them.
- Rename pcic_intr_alloc_mask to pcic_isa_intr_alloc_mask, since it's
an ISA-specific thing.
- When allocating/establishing the PCIC's interrupt (for card events),
do error checking, and pay attention to the intr_alloc_mask.
1997-10-29 22:48:43 +00:00
c733020f4b
Take IRQ 10 out of the default IRQ allocation mask. That IRQ is reserved
...
for the built-in SCSI on NEC Versa docking stations, and if a card
allocates that IRQ, it will never get interrupts. This caused the
default kernel to not work on these laptops, as IRQ 10 was often the
first free IRQ.
1997-10-29 21:33:16 +00:00
87ca153bb5
When creating ccbs, be a little more informative about why we couldn't
...
should creation/initialization of a ccb fail. Also, don't panic in
these situations. Instead, simply return an error condition and allow
the caller to deal with it. It may be the case that we were able to
create one ccb what we can grab, and continue to hobble along.
Also, fix the scb freelist fencepost, like the aha/bha/uha drivers.
1997-10-29 00:30:00 +00:00
917389821c
Changes to the probe and attach routine:
...
- at end of attach, explicitely select an existing drive. This fixes hangs
some users reported (such as the one reported in port-i386/4247).
- Some atapi cdrom drives (e.g. Nec 24x) don't enables their registers before
a controller reset is issued. The controller probe routine is changed as
follow: issue a controller reset. If fail, test atapi signature on slave.
If fail, wait 5s and retry a reset. If the second reset fail, return(0).
If the first reset succeed, test presence of a master drive:
atapi signature, and if this fail RO/RW registers test. If no master, test
atapi signature on slave. If no slave, return 0.
1997-10-27 14:09:23 +00:00
37919a04d9
Moved to src/sys/dev/ic/i82365.c via repository copy.
1997-10-20 20:24:17 +00:00
5c6445bc0d
Don't panic if we fail to remap i/o or mem space in the attach function.
...
Instead, print a diagnostic and return. (Some drivers do this already.)
Also, normalize the diagnostic message, and fix some places where the
printfs were getting ugly.
1997-10-20 18:43:03 +00:00
d82bb1870c
Make sure to unmap bus space when a successful probe is done, to prevent
...
a panic when the attach code does the map again. PR 4302, from
Anders Hjalmarsson.
1997-10-20 13:46:53 +00:00
29500b20c0
Make sure the i/o and/or mem addresses aren't wildcarded (i.e. -1) before
...
using the address in a bus_space_map() call.
1997-10-19 18:56:39 +00:00
fe0c14e139
Fix typo; hang binary operator at the end of previous line.
1997-10-19 14:10:11 +00:00
5c1050e68f
Include locators.h and use symbolic name comes from it.
1997-10-19 14:07:19 +00:00
17e98700bd
Use symbolic names for default locator values.
1997-10-19 09:05:04 +00:00
e7029fc0da
Make the audio API (almost) SunOS compatible.
...
The changes is to allow some limited mixer manipulation through
the audio device (instead of the mixer device).
This rendered 4 methods in audio_hw_if unused so garbage collect these.
1997-10-19 07:41:33 +00:00
83d255de83
This driver can't handle wildcarded iobase.
...
(This is really a config file error.)
1997-10-18 14:09:52 +00:00
801620373d
Define width_names[] only when PCICDEBUG is defined.
1997-10-17 09:37:12 +00:00
4eef29b72f
No need to cast a generic pointer.
1997-10-17 07:59:39 +00:00
b2004a534c
Make sure the 'input' class is used even for the 1345 mixer.
1997-10-16 23:34:57 +00:00
5345a8bef9
Pull marc-pcmcia branch down to trunk.
1997-10-16 23:21:46 +00:00
befea59210
Pull marc-pcmcia branch down to trunk.
1997-10-16 23:21:41 +00:00
735b77fa73
Create new structure aic_isa_softc and hold interrupt handler in it.
1997-10-16 22:55:34 +00:00
9d865fc8f0
Fix a misspelling of slave in a comment.
1997-10-16 15:16:34 +00:00
a35a2a56e4
Garbage-collect "com" device declaration.
1997-10-16 00:47:23 +00:00
bc6479768b
Adjust for the new "com" driver home.
1997-10-16 00:29:28 +00:00
dfba65768d
Moved by repository copy magick to sys/dev/ic.
1997-10-16 00:18:54 +00:00
9ba1ceb091
Pulldown from marc-pcmcia branch.
1997-10-15 22:00:10 +00:00
2e1df18229
Cleanup ISA probe code. Don't collect info first. Just do the probe.
1997-10-15 21:26:51 +00:00
2939780605
Garbage-collect some old i386 console stuff that is no longer used, and
...
add a comment about something to be fixed later.
1997-10-15 21:13:36 +00:00
f9370ddc7a
Add and/or update rnd_*() hooks
1997-10-15 05:55:13 +00:00
62e78a5174
Correct a comment.
1997-10-14 23:06:30 +00:00
ec0566e1f8
Pulldown from marc-pcmcia branch: garbage-collect NE2000 support from
...
this file. The "ne" driver is now used, instead.
1997-10-14 23:04:19 +00:00
4dee791caf
Pulldown from marc-pcmcia branch: ISA front-end for "ne" driver.
1997-10-14 23:01:10 +00:00
10708da893
Pull down from marc-pcmcia branch:
...
Minor tweaks to deal with PCMCIA differences, and support for power
management.
1997-10-14 21:28:37 +00:00
59129515bb
Finalize the isa/lpt.c split:
...
The isa attachment code is in isa/lpt_isa.c now, which attaches to the
already created ic/lpt* files.
You don't need to change your config files, but you need to re-"config" if
using lpt at isa.
XXX The "lpt" device definition should be in sys/conf/files instead, but to
my knowledge, there are some ports which have private copies of lpt, and would
choke on that. No need to make people unhappy 7 days before release branching.
1997-10-14 15:50:15 +00:00
837124b35c
add bebox
1997-10-14 07:15:45 +00:00
80513cb5ae
o Make usage of /dev/random dependant on
...
pseudo-device rnd # /dev/random and in-kernel generator
in config files.
o Add declaration to all architectures.
o Clean up copyright message in rnd.c, rnd.h, and rndpool.c to include
that this code is derived in part from Ted Tyso's linux code.
1997-10-13 00:46:08 +00:00
b551325998
AudioElinear -> AudioEslinear
1997-10-11 12:36:04 +00:00
2d019e5efd
AudioC[A-Z] -> AudioC[a-z]
1997-10-11 11:28:49 +00:00
b5feb41072
Add hooks to insert timing info into the random system
1997-10-10 01:09:03 +00:00
11a27a1132
Fix tipo inherited from old version of TNF copyright template.
1997-10-09 07:57:17 +00:00
mycroft