pseudo-device rnd # /dev/random and in-kernel generator
in config files.
o Add declaration to all architectures.
o Clean up copyright message in rnd.c, rnd.h, and rndpool.c to include
that this code is derived in part from Ted Tyso's linux code.
msgbuf. Note that old 'dmesg' and 'syslogd' binaries will continue running,
though old 'dmesg' binaries will output a few bytes of junk at the start of
the buffer, and will miss a few bytes at the end of the buffer.
(currently only CD-ROM drives on i386). The sys/dev/scsipi system provides 2
busses to which devices can attach (scsibus and atapibus). This needed to
change some include files and structure names in the low level scsi drivers.
* Finish new ARP (struct ethercom) changes.
Some references to sc_ac were left danglnig.
* Include if_dl.h and if_media.h.
* Delint printf() messages: int vs. long , int vs. pointer.
* Delete unused variables.
* add prototypes to <dma.h> for the per-device dma-setup functions.
* MachEmptyWriteBuffer() -> wbflush(). Also #include <bus.h>,
so that wbflush() expants to the locore callback vector entrypoint.
* rewrite findroot() based on NetBSD 1.2F i386 findoot().
* Rewrite makebootdev() to use struct devnametodevmaj pica_nam2blk[].
Previous changes changed the `devname' char array and findroot()
bot not makebootdev().
* Add prototypes, delint for gcc -Wall.
* Move declaration of locore communcation variables (CPU family,
cache sizes, etc) to mips/include/locore.h. Delete from
pmax/include/cpu.h and older versions from pica/include/cpu.h.
* Move definitions of CLKF_BASEPRI, CLKF_USERMODE to mips/include/cpu.
* Delete duplicate definitions in pica/include/cpu.h, pmax/include/cpu.h.
Some of the stuff (e.g., rarpd, bootpd, dhcpd etc., libsa) still will
only support Ethernet. Tcpdump itself should be ok, but libpcap needs
lot of work.
For the detailed change history, look at the commit log entries for
the is-newarp branch.
Eliminate obsolete global kernel variable "struct timezone tz"
Add RTC_OFFSET option
Add global kernel variable rtc_offset, which is initialized by
RTC_OFFSET at kernel compile time.
on i386, x68k, mac68k, pc532 and arm32, RTC_OFFSET indicates how many
minutes west (east) of GMT the hardware RTC runs. Defaults to 0.
Places where tz variable was used to indicate this in the past have
been replaced with rtc_offset.
Add sysctl interface to rtc_offset.
Kill obsolete DST_* macros in sys/time.h
gettimeofday now always returns zeroed timezone if zone is requested.
settimeofday now ignores and logs attempts to set non-existant kernel
timezone.
on indirect-config busses a (permanent) softc that they could share
between 'match' and 'attach' routines:
Define __BROKEN_INDIRECT_CONFIG so that old autoconfiguration
interfaces are used, until drivers are converted to use the new
interfaces (actually, converted back to use the _older_ interfaces)
which prohibit indirect configuration devices from receiving a softc
in their match routine that they can share with their attach routine.
Lets users over-ride with makeoptions COPTS="..." in kernel config files.
Leave `mandatory' flags (like -msoft-float which on m68k enforces no
FP in kernel) in CFLAGS.
* use mips_round_page,mips_trunc_seg() instead of
pica_round_page(),pica_trunc_page().
* discard (unused) return value from TLBUpdate(), and delete
(unused) temporary variable used to hold it.
* Move mips-I pte (TLBlo) definitions from pmax/include/pte.h
to mips/include/mips1_pte.h
* Move mips-III pte (TLBlo) definitions from pica/include/pte.h
to mips/include/mips3_pte.h
* Add new mips/include/pte.h, which includes exactly one of
mips1_pte.h or mips3_pte.h (which still have namespace collisions),
depending on "options MIPS1" or "options MIPS3". (hack).
Move soft kvtopte(), ptetovk() definitions to mips/include/pte.h
* Add macro PTE_TO_PADDR() to hide the different hardware TLB formats
when mapping from pte to physical address.
* Add macro PTE_READONLY() to hide lack of SW read-only bit in mips-III
tlb. (mips1 pmap uses a sw bit in the PTE, mips3 looks up RO bit in
the kernel pmap.)
* Use macros (not direct TLB frobbing) in mips/trap.c, to make it
mips-1/mips-III indepenndet.
* Change {pmax,pica}/include/pte.h to just do #include <mips/pte.h>.
* fold in netBSD style changes:
``if (foo = bar)'' -> ``if ((foo = bar) != 0)''
* add mips1 vector as well as mips3 vector
* change vector names to make mips1 and mips3 locore entrpoints distinct
* add pmax additions (e.g., old fixes to ktrace code, kernel-TLB_miss
instrumentation)
* update stack traceback code to a newer version of the pmax code.
from arch/mips/mips/locore.S to arch/pmax/pmax/locore_machdep.S.
* Move ARC-specific locore code (vmstat -i counters) to
arch/pica/pica/locore_machdep.S.
* When the mips3 locore support is known to work, both ports can now use
arch/mips/mips/locore.S.
consistency with the way machdep headers for other things are done.
(the creation of the ecoff_machdep.h files was done on the CVS server, to
keep the RCS logs intact.)
macros to use to remove #ifdefs from the machine ID case check.
Eventually, these headers will contain other information, e.g.
machine-dependent relocation information, etc.
multi-channel driver), or to SCSI_CHANNEL_ONLY_ONE if a
single-channel driver.
(2) use scsiprint() rather than a locally-defined autoconfig print
function, and kill any locally-defined print function.
a char *, because that's what was really intended, and because
if the print function modifies the string, various things could become
unhappy (so the string should _not_ be modified).
definitions.
* Include <mips/cpuregs.h> in <cpu.h> so kern_clock.c has user/kernel
status bits in scope. Still needs work; r2k/r4k previous-mode bits
are different.
* Include <mips/mips_param.h> in pica/include/param.h, for locore declarations,
and definitions of vm and other constants that should be shared across
NetBSD/mips systems to esnsure user-level binary compatibility.
* include <mips/locore.h> where callbacks into locore are made, to get
prototypes in scope. Cast calls appropriately.
* include <mips/cpuregs.h>, not the old Sprite-derived <machine/machConst.h>.
machConst.h is deprecated.
* dk_establish() must return void, not int.
* Make S expand to an absolute path at compile time.
* Use `-S' rather than `-x' to remove debugging symbols.
* Garbage collect unused variables.
* Reverse a handful of port-specific changes that do not correspond to
the common build model and are not needed.
a boot string for firmware that can do this, such as the SPARC and
the sun3 models. It is currently silently ignored on all other
hardware now, however. The MD function "boot()" has been changed to
also take a char *.
device and a printable "external name" (name + unit number), thus eliminating
if_name and if_unit. Updated interface to (*if_watchdog)() and (*if_start)()
to take a struct ifnet *, rather than a unit number.
* cut-and-paste all the code for both r2000 (MIPS-I) and r4000 (MIPS-III)
into both the pica and pmax locore.S.
* Change the names of the small segments of vector code that are
bcopied to the machine vector locations, to avoid clashing.
Get rid of the Sprite MachXXX names for the vector code, and
use use mips_r2000_xxx and mips_r4000_xxx instead.
Update the names used in the vector-copying code and trap handlers
to match.
* Most of the rest of the pica locore.S was copied from the pmax
locore.S, and then edited to work on an r4000. The names of
functions and of manifest constants stayed the same, although
both assmbler code and constant values changed.
cut-and-paste such code into contiguous blocks protected by
#if / #endif. Much of the cache and trap-handling code
needs r3000-only register fields, on the r3000, and r4000-only
insns and registers on the r4000.
* change the pmax r2000 exception-handling code to extract a trap
code with the user/kernel bit at 0x20 rather than 0x10.
(r2000s have 4-bit execption codes, r4000s have 5-bit.)
Use the a 16 from-user-space + 16-from-kernel space jump table,
just like on the r4000 pica port.
* add NOPs to the common code where required by the r4000 pipeline
constraints.
* add _C_LABEL() macros to the r4000 locore.
Comitted to provide a snapshot for others to test, and work on a cleaner merge.
* Add a MIPS-I (r3000) exception handler to the Pica locore.S.
Change the names of the masks used to extract the exception code
to the new MIPS_xxx names.
* Rename the vector code from MachException() to
mips_r4000_exception, in both locore and in the init_main()
code that copies it from locore to the exception vector locations.
* Change the locore and C code to use the new MIPS_SR_INT_IE
name for the Status register master interrupt-enable bit.
Similar changes to the pmax equivalents are in progress.
arch/pica/pica/trap.c, a generic mips trap handler
arch/pica/pica/pica_trap.c, a handler for Pica interrupts.
so that the common pmax and pica trap handling can eventually be
merged and moved to arch/mips/mips/trap.c
* Add cast to hardclock when it's used directly as an interrupt handler.
* Add a null-interrupt-establish function, to avoid int vs void lint
in pica/dev/dma.c.
* fix include in pica/include/pccons.h to work with "standard"
kernel-compile include path.
* add "MIPS_3k_" for the MIPS-I r[23]000-specific register definitions.
* add "MIPS_4k_" for the MIPS-II/III r4000-specific register definitions.
* add #defines that provide the old values for locore and user
code, so the existing code continues to compile.
Regression-tested against the old headers by grepping for #define's,
editing out the defined symbols, and preprocessing with both the previous
machConst.h headers and this version.
Some unused symbols (CPU and FPU must-be-zero constants) are no longer defined.
Pica interrupt masks are now constant expressions instead of constant
values.
TODO:
* factor out the common #defines into src/sys/arch/mips.
* Get rid of the Sprite coding-style names (MACH_xxx).
* Separate out the r3k/r4k differences from the Pica/pmax differences.
* Figure out how to have a run-time choice of r3k vs. r4k support,
instead of a compile-time choice.
bus memory and I/O space access functions/macros, to be used by
machine-independent code for more sane access to bus resources.
New functions will be added to this set, in the future, as appropriate,
but this is a good starting set. Defines:
bus_{io,mem}_{map,unmap}
bus_{io,mem}_{read,write}_{1,2,4,8}
functions, and several types to go with them.
or for which the Pica port is an older revision of the pmax branch.
A merged version with the NetBSD/pmax revision history is in mips/mips/.
cpu_exec.c
elf.c
mem.c
process_machdep.c
to mips/include/asm.h.
Until all references to <machine/machAsmDefs.h> in the pmax and
pica tree are changed to use <mips/asm.h> directly, just do
#include <mips/asm.h>, for compatibility.
christos